History log of /freebsd/sys/dev/etherswitch/rtl8366/rtl8366rb.c (Results 26 – 49 of 49)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
# efce3748 12-Jul-2014 Rui Paulo <rpaulo@FreeBSD.org>

Revert r268543.

We should probably fix sys/gpio.h instead.


# bd08cbb8 12-Jul-2014 Rui Paulo <rpaulo@FreeBSD.org>

Move iic.h to sys/ so that it's automatically installed in /usr/include/sys.

This lets us call iic(4) ioctls without needing the kernel source code
and follows the same model of GPIO.

MFC after: 3

Move iic.h to sys/ so that it's automatically installed in /usr/include/sys.

This lets us call iic(4) ioctls without needing the kernel source code
and follows the same model of GPIO.

MFC after: 3 weeks

show more ...


Revision tags: release/9.3.0
# 28b07d23 05-Jul-2014 Luiz Otavio O Souza <loos@FreeBSD.org>

Allow the PVID setting on CPU port.

Return our static list of supported media for the CPU port.

Tested on TP-Link 1043ND.


# bfae9329 03-Jul-2014 Luiz Otavio O Souza <loos@FreeBSD.org>

Initialize the switch vlan table at attachment.

Update some comments on code, specifying the correct vlans used on switch
setup.

Advertise the proper switch operation mode (the rtl8366rb only suppo

Initialize the switch vlan table at attachment.

Update some comments on code, specifying the correct vlans used on switch
setup.

Advertise the proper switch operation mode (the rtl8366rb only support
dot1q vlans).

This fixes the breakage that i introduced on r249752 and make the rtl8366rb
switch works again with etherswitchcfg(8).

Tested on TP-Link 1043ND.

Tested by: me, Harm Weites (harm at weites.com)

show more ...


# b0bb5bfa 01-Jul-2014 Luiz Otavio O Souza <loos@FreeBSD.org>

Fix the reported status for the switch CPU port which was (wrongly)
reporting half-duplex link.

Tested on TP-Link WR1043ND.


# dddab089 01-Jul-2014 Luiz Otavio O Souza <loos@FreeBSD.org>

Add the CPU port flag to the CPU port on rtl8366 (port 5).

Do not allow any media change on the switch CPU port.

Tested on TP-Link WR1043ND.


# 3b8f0845 28-Apr-2014 Simon J. Gerraty <sjg@FreeBSD.org>

Merge head


# 84e51a1b 23-Apr-2014 Alan Somers <asomers@FreeBSD.org>

IFC @264767


# 485ac45a 04-Feb-2014 Peter Grehan <grehan@FreeBSD.org>

MFC @ r259205 in preparation for some SVM updates. (for real this time)


Revision tags: release/10.0.0
# f9b2a21c 31-Oct-2013 Gleb Smirnoff <glebius@FreeBSD.org>

Merge head r232040 through r257457.
M usr.sbin/portsnap/portsnap/portsnap.8
M usr.sbin/portsnap/portsnap/portsnap.sh
M usr.sbin/tcpdump/tcpdump/Makefile


# 3d02237c 29-Oct-2013 Luiz Otavio O Souza <loos@FreeBSD.org>

Fix the build of TP-WN1043ND kernel. Provide necessary includes and remove
unnecessary includes for rtl8366rb.

Approved by: adrian (mentor)


# 0bfd163f 18-Oct-2013 Gleb Smirnoff <glebius@FreeBSD.org>

Merge head r233826 through r256722.


# 1ccca3b5 10-Oct-2013 Alan Somers <asomers@FreeBSD.org>

IFC @256277

Approved by: ken (mentor)


Revision tags: release/9.2.0
# d1d01586 05-Sep-2013 Simon J. Gerraty <sjg@FreeBSD.org>

Merge from head


# 40f65a4d 07-Aug-2013 Peter Grehan <grehan@FreeBSD.org>

IFC @ r254014


# 672ed870 02-Aug-2013 Peter Grehan <grehan@FreeBSD.org>

IFC @ r253862

- change the SI_SUB_RUN_SCHEDULER sysinits in hv_utilc and
hv_netvsc_drv_freebsd.c to SI_SUB_KTHREAD_IDLE, since the
former is no longer in FreeBSD.
The use of these SYSINITs can pro

IFC @ r253862

- change the SI_SUB_RUN_SCHEDULER sysinits in hv_utilc and
hv_netvsc_drv_freebsd.c to SI_SUB_KTHREAD_IDLE, since the
former is no longer in FreeBSD.
The use of these SYSINITs can probably be removed.

show more ...


# cc320e37 23-Jul-2013 Luiz Otavio O Souza <loos@FreeBSD.org>

Add a new flag (ETHERSWITCH_VID_VALID) to say what vlangroups are in use.
This fix the case when etherswitch is printing the information of port 0
vlan group (in port based vlan mode) with no member

Add a new flag (ETHERSWITCH_VID_VALID) to say what vlangroups are in use.
This fix the case when etherswitch is printing the information of port 0
vlan group (in port based vlan mode) with no member ports.

Add the ETHERSWITCH_VID_VALID support to ip17x driver.

Add the ETHERSWITCH_VID_VALID support to rt8366 driver.

arswitch doesn't need to be updated as it doesn't support vlans management
yet.

Approved by: adrian (mentor)

show more ...


# 552311f4 17-Jul-2013 Xin LI <delphij@FreeBSD.org>

IFC @253398


# cfe30d02 19-Jun-2013 Gleb Smirnoff <glebius@FreeBSD.org>

Merge fresh head.


Revision tags: release/8.4.0
# a3219359 22-Apr-2013 Adrian Chadd <adrian@FreeBSD.org>

Convert over the etherswitch framework to use VLAN IDs per port, rather
than VLAN groups.

Some chips (eg this rtl8366rb) has a VLAN group per port - you first
define a set of VLANs in a vlan group,

Convert over the etherswitch framework to use VLAN IDs per port, rather
than VLAN groups.

Some chips (eg this rtl8366rb) has a VLAN group per port - you first
define a set of VLANs in a vlan group, then you assign a VLAN group
to a port.

Other chips (eg the AR8xxx switch chips) have a VLAN ID array per
port - there's no group per se, just a list of vlans that can be
configured.

So for now, the switch API will use the latter and rely on drivers
doing the heavy lifting if one wishes to use the VLAN group method.
Maybe later on both can be supported.

PR: kern/177878
PR: kern/177873
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray

show more ...


Revision tags: release/9.1.0
# b652778e 11-Jul-2012 Peter Grehan <grehan@FreeBSD.org>

IFC @ r238370


# 31ccd489 28-May-2012 Gleb Smirnoff <glebius@FreeBSD.org>

Merge head r233826 through r236168.


# 6a068746 15-May-2012 Alexander Motin <mav@FreeBSD.org>

MFC


# a043e8c7 11-May-2012 Adrian Chadd <adrian@FreeBSD.org>

Commit the first pass of the etherswitch support.

This is designed to support the very basic ethernet switch chip behaviour,
specifically:

* accessing switch register space;
* accessing per-PHY reg

Commit the first pass of the etherswitch support.

This is designed to support the very basic ethernet switch chip behaviour,
specifically:

* accessing switch register space;
* accessing per-PHY registers (for switches that actually expose PHYs);
* basic vlan group support, which applies for the rtl8366 driver but not
for the atheros switches.

This also includes initial support for:

* rtl8366rb support - which is a 10/100/1000 switch which supports
vlan groups;
* Initial Atheros AR8316 switch support - which is a 10/100/1000 switch
which supports an alternate vlan configuration (so the vlan group
methods are stubbed.)

The general idea here is that the switch driver may speak to a variety of
backend busses (mdio, i2c, spi, whatever) and expose:

* If applicable, one or more MDIO busses which ethernet interfaces can
then attach PHYs to via miiproxy/mdioproxy;

* exposes miibusses, one for each port at the moment, so ..

* .. a PHY can be exposed on each miibus, for each switch port, with all
of the existing MII/ifnet framework.

However:

* The ifnet is manually created for now, and it isn't linked into the
interface list, nor can you (currently) send/receive frames on this ifnet.
At some point in the future there may be _some_ support for this, for
switches with a multi-port, isolated mode.

* I'm still in the process of sorting out correct(er) locking.

TODO:

* ray's switch code in zrouter (zrouter.org) includes a much more developed
newbus API that covers the various switch methods, as well as a
capability API so drivers, the switch layer and the userland utility
can properly control the subset of supported features.

The plan is to sort that out later, once the rest of ray's switch drivers
are brought over and extended to export MII busses and PHYs.

Submitted by: Stefan Bethke <stb@lassitu.de>
Reviewed by: ray

show more ...


12