Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

The AR9485 chip and AR933x SoC both implement LNA diversity.
There are a few extra things that need to happen before thi

Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

The AR9485 chip and AR933x SoC both implement LNA diversity.
There are a few extra things that need to happen before this can be
flipped on for those chips (mostly to do with setting up the different
bias values and LNA1/LNA2 RSSI differences) but the first stage is
putting this code into the driver layer so it can be reused.

This has the added benefit of making it easier to expose configuration
options and diagnostic information via the ioctl API. That's not yet
being done but it sure would be nice to do so.

Tested:

* AR9285, with LNA diversity enabled
* AR9285, with LNA diversity disabled in EEPROM

show more ...

MFC

MFC @ r241285

IFC @ r242684

Sync from head

Add a debug method to dump the EDMA TX status descriptor contents out.

This requires some HAL API changes to be useful, as there's no way
right now to pull out the TX status descriptor contents.

Pause and unpause the software queues for a given node based on the
net80211 node power save state.

* Add an ATH_NODE_UNLOCK_ASSERT() check
* Add a new node field - an_is_powersave
* Pause/unpause t

Pause and unpause the software queues for a given node based on the
net80211 node power save state.

* Add an ATH_NODE_UNLOCK_ASSERT() check
* Add a new node field - an_is_powersave
* Pause/unpause the queue based on the node state
* Attempt to handle net80211 concurrency issues so the queue
doesn't get paused/unpaused more than once at a time from
the net80211 power save code.

Whilst here (and breaking my usual rule), set CLRDMASK when a queue
is unpaused, regardless of whether the queue has some pending traffic.
This means the first frame from that TID (now or later) will hvae
CLRDMASK set.

Also whilst here, bump the swretrymax counters whenever the
filtered frames code expires a frame. Again, breaking my rule, but
this is just a statistics thing rather than a functional change.

This doesn't fix ps-poll (but it doesn't break it too much worse
than it is at the present) or correcting the TID updates.
That's next on the list.

Tested:
* AR9220 AP (Atheros AP96 reference design)
* Macbook Pro and LG Optimus 1 Android phone, both setting
and clearing power save state (but not using PS-POLL.)

show more ...

Migrate the ath(4) KTR logging to use an ATH_KTR() macro.

This should eventually be unified with ATH_DEBUG() so I can get both
from one macro; that may take some time.

Add some new probes for TX an

Migrate the ath(4) KTR logging to use an ATH_KTR() macro.

This should eventually be unified with ATH_DEBUG() so I can get both
from one macro; that may take some time.

Add some new probes for TX and TX completion.

show more ...

Add a debug bit for TX destination filtering.

Merge head r236710 through r238467.

IFC @238412.

IFC @ r238370

Map ATH_KTR_* to 0 when ATH_DEBUG is not defined. This effectively NOPs
out their use in that case.

Migrate the ATH_KTR_* fields out to if_ath_debug.h .

Add a debug category for RX EDMA.

IFC @ r236291.
Diff reductions to the enclosure driver made in r235911.

Merge head r233826 through r236168.

Migrate ath_debug and sc_debug from an int to a uint64_t / QUAD;
add some more BAR debugging logic.

* Change the definition of ath_debug and ath_softc.sc_debug from
int to uint64_t;
* Change the

Migrate ath_debug and sc_debug from an int to a uint64_t / QUAD;
add some more BAR debugging logic.

* Change the definition of ath_debug and ath_softc.sc_debug from
int to uint64_t;
* Change the relevant sysctls;
* Add a new BAR TX debugging field;
* Use this in if_ath_tx.

This has been tested by using the sysctl program, which happily allows
for fields > 32 bits to be configured.

show more ...

IFC @230489 (pending review).

IFC @ r227804

Pull in the virtio drivers from head.

Add some new ath(4) debugging bits, from my if_ath_tx 11n TX branch.

Merge svn+ssh://svn.freebsd.org/base/head@218816

Break out the debug macros from if_ath.c into if_ath_debug.[ch] .

This is prep work for breaking out the TX path into a separate
set of source files.