IFC @ r238370

Extend the RX descriptor completion debugging to log the larger
AR93xx receive descriptors.

This isn't entirely complete - the AR93xx and later descriptors
don't have a link/buffer pointer; the desc

Extend the RX descriptor completion debugging to log the larger
AR93xx receive descriptors.

This isn't entirely complete - the AR93xx and later descriptors
don't have a link/buffer pointer; the descriptor contents just
start.

show more ...

Revert r233227 and followup commits as it breaks CCMP PN replay detection.

This showed up when doing heavy UDP throughput on SMP machines.

The problem with this is because the 802.11 sequence numbe

Revert r233227 and followup commits as it breaks CCMP PN replay detection.

This showed up when doing heavy UDP throughput on SMP machines.

The problem with this is because the 802.11 sequence number is being
allocated separately to the CCMP PN replay number (which is assigned
during ieee80211_crypto_encap()).

Under significant throughput (200+ MBps) the TX path would be stressed
enough that frame TX/retry would force sequence number and PN allocation
to be out of order. So once the frames were reordered via 802.11 seqnos,
the CCMP PN would be far out of order, causing most frames to be discarded
by the receiver.

I've fixed this in some local work by being forced to:

(a) deal with the issues that lead to the parallel TX causing out of
order sequence numbers in the first place;
(b) fix all the packet queuing issues which lead to strange (but mostly
valid) TX.

I'll begin fixing these in a subsequent commit or five.

PR: kern/166190

show more ...

IFC @ r236291.
Diff reductions to the enclosure driver made in r235911.

Merge head r233826 through r236168.

Migrate ath_debug and sc_debug from an int to a uint64_t / QUAD;
add some more BAR debugging logic.

* Change the definition of ath_debug and ath_softc.sc_debug from
int to uint64_t;
* Change the

Migrate ath_debug and sc_debug from an int to a uint64_t / QUAD;
add some more BAR debugging logic.

* Change the definition of ath_debug and ath_softc.sc_debug from
int to uint64_t;
* Change the relevant sysctls;
* Add a new BAR TX debugging field;
* Use this in if_ath_tx.

This has been tested by using the sysctl program, which happily allows
for fields > 32 bits to be configured.

show more ...

MFC

IFC @ r234692

sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c

- Add API to allow vmm FPU state init/save/restore.

FP stuff discussed with: kib

Merge head r233826 through r234091.

Remove duplicate txflags field from ath_buf.

rename bf_state.bfs_flags to bf_state.bfs_txflags, as that is what
it effectively is.

Merge head r232686 through r233825 into projects/pf/head.

Delay sequence number allocation for A-MPDU until just before the frame
is queued to the hardware.

Because multiple concurrent paths can execute ath_start(), multiple
concurrent paths can push frame

Delay sequence number allocation for A-MPDU until just before the frame
is queued to the hardware.

Because multiple concurrent paths can execute ath_start(), multiple
concurrent paths can push frames into the software/hardware TX queue
and since preemption/interrupting can occur, there's the possibility
that a gap in time will occur between allocating the sequence number
and queuing it to the hardware.

Because of this, it's possible that a thread will have allocated a
sequence number and then be preempted by another thread doing the same.
If the second thread sneaks the frame into the BAW, the (earlier) sequence
number of the first frame will be now outside the BAW and will result
in the frame being constantly re-added to the tail of the queue.
There it will live until the sequence numbers cycle around again.

This also creates a hole in the RX BAW tracking which can also cause
issues.

This patch delays the sequence number allocation to occur only just before
the frame is going to be added to the BAW. I've been wanting to do this
anyway as part of a general code tidyup but I've not gotten around to it.
This fixes the PR.

However, it still makes it quite difficult to try and ensure in-order
queuing and dequeuing of frames. Since multiple copies of ath_start()
can be run at the same time (eg one TXing process thread, one TX completion
task/one RX task) the driver may end up having frames dequeued and pushed
into the hardware slightly/occasionally out of order.

And, to make matters more annoying, net80211 may have the same behaviour -
in the non-aggregation case, the TX code allocates sequence numbers
before it's thrown to the driver. I'll open another PR to investigate
this and potentially introduce some kind of final-pass TX serialisation
before frames are thrown to the hardware. It's also very likely worthwhile
adding some debugging code into ath(4) and net80211 to catch when/if this
does occur.

PR: kern/166190

show more ...

IFC @230489 (pending review).

IFC @ r227804

Pull in the virtio drivers from head.

Add support to the TX descriptor printing code to follow ath_buf
chains. This allows for debugging of aggregate frames.

Sponsored by: Hobnob, Inc.

Merge svn+ssh://svn.freebsd.org/base/head@218816

Break out the debug macros from if_ath.c into if_ath_debug.[ch] .

This is prep work for breaking out the TX path into a separate
set of source files.