IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Sync to HEAD@r269943.

xen: add ACPI bus to xen_nexus when running as Dom0

Also disable a couple of ACPI devices that are not usable under Dom0.
To this end a couple of booleans are added that allow disabling ACPI
specifi

xen: add ACPI bus to xen_nexus when running as Dom0

Also disable a couple of ACPI devices that are not usable under Dom0.
To this end a couple of booleans are added that allow disabling ACPI
specific devices.

Sponsored by: Citrix Systems R&D
Reviewed by: jhb

x86/xen/xen_nexus.c:
- Return BUS_PROBE_SPECIFIC in the Xen Nexus attachement routine to
force the usage of the Xen Nexus.
- Attach the ACPI bus when running as Dom0.

dev/acpica/acpi_cpu.c:
dev/acpica/acpi_hpet.c:
dev/acpica/acpi_timer.c
- Add a variable that gates the addition of the devices.

x86/include/init.h:
- Declare variables that control the attachment of ACPI cpu, hpet and
timer devices.

show more ...

MFC @ r256071

This is just prior to the bhyve_npt_pmap import so will allow
just the change to be merged for easier debug.

Merge head r233826 through r256722.

Merge head@256284

IFC @256277

Approved by: ken (mentor)

MFC - tracking update.

Add support for suspend/resume/migration operations when running as a
Xen PVHVM guest.

Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (blanket Xen)

Add support for suspend/resume/migration operations when running as a
Xen PVHVM guest.

Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (blanket Xen)
MFC after: 2 weeks

sys/amd64/amd64/mp_machdep.c:
sys/i386/i386/mp_machdep.c:
- Make sure that are no MMU related IPIs pending on migration.
- Reset pending IPI_BITMAP on resume.
- Init vcpu_info on resume.

sys/amd64/include/intr_machdep.h:
sys/i386/include/intr_machdep.h:
sys/x86/acpica/acpi_wakeup.c:
sys/x86/x86/intr_machdep.c:
sys/x86/isa/atpic.c:
sys/x86/x86/io_apic.c:
sys/x86/x86/local_apic.c:
- Add a "suspend_cancelled" parameter to pic_resume(). For the
Xen PIC, restoration of interrupt services differs between
the aborted suspend and normal resume cases, so we must provide
this information.

sys/dev/acpica/acpi_timer.c:
sys/dev/xen/timer/timer.c:
sys/timetc.h:
- Don't swap out "suspend safe" timers across a suspend/resume
cycle. This includes the Xen PV and ACPI timers.

sys/dev/xen/control/control.c:
- Perform proper suspend/resume process for PVHVM:
- Suspend all APs before going into suspension, this allows us
to reset the vcpu_info on resume for each AP.
- Reset shared info page and callback on resume.

sys/dev/xen/timer/timer.c:
- Implement suspend/resume support for the PV timer. Since FreeBSD
doesn't perform a per-cpu resume of the timer, we need to call
smp_rendezvous in order to correctly resume the timer on each CPU.

sys/dev/xen/xenpci/xenpci.c:
- Don't reset the PCI interrupt on each suspend/resume.

sys/kern/subr_smp.c:
- When suspending a PVHVM domain make sure there are no MMU IPIs
in-flight, or we will get a lockup on resume due to the fact that
pending event channels are not carried over on migration.
- Implement a generic version of restart_cpus that can be used by
suspended and stopped cpus.

sys/x86/xen/hvm.c:
- Implement resume support for the hypercall page and shared info.
- Clear vcpu_info so it can be reset by APs when resuming from
suspension.

sys/dev/xen/xenpci/xenpci.c:
sys/x86/xen/hvm.c:
sys/x86/xen/xen_intr.c:
- Support UP kernel configurations.

sys/x86/xen/xen_intr.c:
- Properly rebind per-cpus VIRQs and IPIs on resume.

show more ...

Merge fresh head.

IFC @247348.

Sync with HEAD.

Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays

Reviewed by: cognet
Approved by: cognet

MFC

IFC @ r234692

sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c

- Add API to allow vmm FPU state init/save/restore.

FP stuff discussed with: kib

IFC @231845

Sponsored by: Cisco Systems, Inc.

Refine r231226. Swap timecounters before suspending any device drivers.

Revert r211288 and move the logic to the acpi_timer itself.

- Give all clocks and timers on acpi0 the equal probing order.
- Increase probing order for ECDT table to match HID-based probing.
- Decrease probing order for HPET table to match HID-based probing.

- Give all clocks and timers on acpi0 the equal probing order.
- Increase probing order for ECDT table to match HID-based probing.
- Decrease probing order for HPET table to match HID-based probing.
- Decrease probing order for CPUs and system resources.
- Fix ACPI_DEV_BASE_ORDER to reflect the reality.

show more ...

IFC @ r222256

MFC

Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter
quality to 950. HPET on modern platforms usually have better resolution and
lower latency than ACPI timer. Effectively th

Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter
quality to 950. HPET on modern platforms usually have better resolution and
lower latency than ACPI timer. Effectively this changes default timecounter
hardware from ACPI-fast to HPET by default when both are available.

Discussed with: avg

show more ...

Do not assume PM timer GAS type is I/O or memory. It may be an unsupported
type, i. e., a broken table. Also, do not hardcode ACPI timer frequency in
device description.

Add some tunable descriptions about x86 timers.

Requested by: arundel

Lower the bar for ACPI-fast on real machines slightly. Empirical evidences
show that there are perfectly working PM timers with occasional "hiccups",
probably because of an SMI. Now we ignore the m

Lower the bar for ACPI-fast on real machines slightly. Empirical evidences
show that there are perfectly working PM timers with occasional "hiccups",
probably because of an SMI. Now we ignore the maximum if it happens once in
the test loop and the width is small enough. Also, relax normal width a bit
to count in a boundary case.

show more ...