| #
cfe30d02 |
| 19-Jun-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge fresh head.
|
|
Revision tags: release/8.4.0 |
|
| #
69e6d7b7 |
| 12-Apr-2013 |
Simon J. Gerraty <sjg@FreeBSD.org> |
sync from head
|
| #
876a84e8 |
| 18-Mar-2013 |
Martin Matuska <mm@FreeBSD.org> |
MFC @248461
|
| #
5fd81be1 |
| 11-Mar-2013 |
Alexander Motin <mav@FreeBSD.org> |
Add "else" missed at r248154.
|
| #
98992b29 |
| 11-Mar-2013 |
Alexander Motin <mav@FreeBSD.org> |
Reduce HPET eventtimer priority on systems with 8 or more cores. Price of
the lock congestion may be too high there (2.5% on 4x4 core AMD Opteron).
|
| #
fdc5dd2d |
| 28-Feb-2013 |
Alexander Motin <mav@FreeBSD.org> |
MFcalloutng:
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking abo
MFcalloutng:
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
show more ...
|
| #
d241a0e6 |
| 26-Feb-2013 |
Xin LI <delphij@FreeBSD.org> |
IFC @247348.
|
| #
d9a44755 |
| 08-Feb-2013 |
David E. O'Brien <obrien@FreeBSD.org> |
Sync with HEAD.
|
| #
61bfd867 |
| 30-Jan-2013 |
Sofian Brabez <sbz@FreeBSD.org> |
Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by: cognet
Approved by: cognet
|
|
Revision tags: release/9.1.0 |
|
| #
e477abf7 |
| 27-Nov-2012 |
Alexander Motin <mav@FreeBSD.org> |
MFC @ r241285
|
| #
a10c6f55 |
| 11-Nov-2012 |
Neel Natu <neel@FreeBSD.org> |
IFC @ r242684
|
| #
23090366 |
| 04-Nov-2012 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Sync from head
|
| #
df980c68 |
| 09-Sep-2012 |
Alexander Motin <mav@FreeBSD.org> |
At least from A70M FCH chipsets AMD started to use their real vendor ID
(1022) in HPET. But according to report they still haven't fixed problem
with level-triggered interrupts.
Make workaround used
At least from A70M FCH chipsets AMD started to use their real vendor ID
(1022) in HPET. But according to report they still haven't fixed problem
with level-triggered interrupts.
Make workaround used for earlier chipsets apply to this new ID also.
PR: amd64/171355
MFC after: 3 days
show more ...
|
| #
6a068746 |
| 15-May-2012 |
Alexander Motin <mav@FreeBSD.org> |
MFC
|
| #
38f1b189 |
| 26-Apr-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r234692
sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c
- Add API to allow vmm FPU state init/save/restore.
FP stuff discussed with: kib
|
|
Revision tags: release/8.3.0_cvs, release/8.3.0 |
|
| #
8833b15f |
| 03-Apr-2012 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge head r232686 through r233825 into projects/pf/head.
|
| #
fd94de5c |
| 10-Mar-2012 |
Alexander Motin <mav@FreeBSD.org> |
ServerWorks HT1000 HPET reported to have problems with IRQs >= 16.
Lower (ISA) IRQs are working, but allowed mask is not set correctly.
Block both by default to allow HP BL465c G6 blade system to boo
ServerWorks HT1000 HPET reported to have problems with IRQs >= 16.
Lower (ISA) IRQs are working, but allowed mask is not set correctly.
Block both by default to allow HP BL465c G6 blade system to boot.
Reported by: Attila Nagy <bra@fsn.hu>
MFC after: 1 week
show more ...
|
| #
9dba179d |
| 17-Feb-2012 |
Bjoern A. Zeeb <bz@FreeBSD.org> |
IFC @231845
Sponsored by: Cisco Systems, Inc.
|
| #
404b0d10 |
| 07-Feb-2012 |
Jung-uk Kim <jkim@FreeBSD.org> |
- Give all clocks and timers on acpi0 the equal probing order.
- Increase probing order for ECDT table to match HID-based probing.
- Decrease probing order for HPET table to match HID-based probing.
- Give all clocks and timers on acpi0 the equal probing order.
- Increase probing order for ECDT table to match HID-based probing.
- Decrease probing order for HPET table to match HID-based probing.
- Decrease probing order for CPUs and system resources.
- Fix ACPI_DEV_BASE_ORDER to reflect the reality.
show more ...
|
|
Revision tags: release/9.0.0 |
|
| #
fab4c373 |
| 16-Sep-2011 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r225592
sys/dev/bvm/bvm_console.c - move up to the new alt-break order.
|
| #
4ff9eb89 |
| 01-Sep-2011 |
Alexander Motin <mav@FreeBSD.org> |
Integrate from head at r225316.
|
| #
98393876 |
| 16-Aug-2011 |
Alexander Motin <mav@FreeBSD.org> |
Always check current HPET counter value after comparator programming to
avoid lost timer interrupts. Previous optimization attempt doing it only
for intervals less then 5000 ticks (~300us) reported t
Always check current HPET counter value after comparator programming to
avoid lost timer interrupts. Previous optimization attempt doing it only
for intervals less then 5000 ticks (~300us) reported to be unreliable by
some people. Probably because of some heavy SMI code on their boards.
Introduce additional safety interval of 128 counter ticks (~9us) between
programmed comparator and counter values to cover different cases of
delayed write found on some chipsets.
Approved by: re (kib)
show more ...
|
| #
87c3644c |
| 24-May-2011 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r222256
|
| #
3ac3f600 |
| 24-May-2011 |
Attilio Rao <attilio@FreeBSD.org> |
MFC
|
| #
ca5f1efd |
| 23-May-2011 |
Jung-uk Kim <jkim@FreeBSD.org> |
Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter
quality to 950. HPET on modern platforms usually have better resolution and
lower latency than ACPI timer. Effectively th
Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter
quality to 950. HPET on modern platforms usually have better resolution and
lower latency than ACPI timer. Effectively this changes default timecounter
hardware from ACPI-fast to HPET by default when both are available.
Discussed with: avg
show more ...
|