MFH r338661 through r339200.

Sponsored by: The FreeBSD Foundation

Merge ^/head r338731 through r338987.

amd64: implement memcmp in assembly

Both the in-kernel C variant and libc asm variant have very poor performance.
The former compiles to a single byte comparison loop, which breaks down even
for sma

amd64: implement memcmp in assembly

Both the in-kernel C variant and libc asm variant have very poor performance.
The former compiles to a single byte comparison loop, which breaks down even
for small sizes. The latter uses rep cmpsq/b which turn out to have very poor
throughput and are slower than a hand-coded 32-byte comparison loop.

Depending on size this is about 3-4 times faster than the current routines.

Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17328

show more ...

Make ZSTD a real option via ZSTDIO.

It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm m

Make ZSTD a real option via ZSTDIO.

It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm missing how to do it.

I did a cursory audit of kernel config files and made a decision to
enable ZSTDIO in riscv GENERIC and mips MALTA configurations. All other
kernel configurations already had this option in their kernel configs
but they didn't do anything useful as the feature was declared as
"standard" prior to this.

Reviewed by: cem allanjude
Differential Revision: https://reviews.freebsd.org/D16007

show more ...

o Add driver for PLIC (Platform-Level Interrupt Controller) device.
o Convert interrupt machdep support to use INTRNG code.

Sponsored by: DARPA, AFRL

Add simplebus-like RISC-V SoC bus.

This is required in order to probe and attach devices described under
"riscv-virtio-soc" node of DTS.

Sponsored by: DARPA, AFRL

Simplify things a little

Rather than include a copy for memmove to call bcopy to call memcpy
(which handles overlapping copies), make memmove a strong reference to
memcpy to save the two calls.

Dif

Simplify things a little

Rather than include a copy for memmove to call bcopy to call memcpy
(which handles overlapping copies), make memmove a strong reference to
memcpy to save the two calls.

Differential Revision: https://reviews.freebsd.org/D15374

show more ...

Move MI-ish bcopy routine to libkern

riscv and powerpc have nearly identical bcopy.c that's
supposed to be mostly MI. Move it to the MI libkern.

Differential Revision: https://reviews.freebsd.org/D

Move MI-ish bcopy routine to libkern

riscv and powerpc have nearly identical bcopy.c that's
supposed to be mostly MI. Move it to the MI libkern.

Differential Revision: https://reviews.freebsd.org/D15374

show more ...

Merge ^/head r327624 through r327885.

Include ffsll() on riscv kernels.

Finally, fix Zstd kernel build on MIPS and RISC-V

Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that la

Finally, fix Zstd kernel build on MIPS and RISC-V

Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that lack
assembly intrinsics for those builtins (MIPS and RISC-V).

Future cleanup work might involve bringing these into a mini libcompiler-rt
for the standalone kernel environment. Or cleaning up the approach upstream
takes for builtins in standalone environments (or just FreeBSD). For now,
at least this builds, and doesn't require modifying the vendor code.

Reported by: jeff, markj, mizhka
Reviewed by: jhb (earlier version), rpokala (comment text earlier version)
Sponsored by: Dell EMC Isilon

show more ...

MFhead@r322451

Merge ^/head r321383 through r322397.

Support for v1.10 (latest) of RISC-V privilege specification.

New version is not compatible on supervisor mode with v1.9.1
(previous version).

Highlights:
o BBL (Berkeley Boot Loader) provides

Support for v1.10 (latest) of RISC-V privilege specification.

New version is not compatible on supervisor mode with v1.9.1
(previous version).

Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).

Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800

show more ...

Merge ^/head r313301 through r313643.

MFhead@r313360

Merge projects/ipsec into head/.

Small summary
-------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option

Merge projects/ipsec into head/.

Small summary
-------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.

Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352

show more ...

Merge ^/head r303250 through r304235.

MFhead @ r304038

o Remove operation in machine mode.
Machine privilege level was specially designed to use in vendor's
firmware or bootloader. We have implemented operation in machine
mode in FreeBSD as part of

o Remove operation in machine mode.
Machine privilege level was specially designed to use in vendor's
firmware or bootloader. We have implemented operation in machine
mode in FreeBSD as part of understanding RISC-V ISA, but it is time
to remove it.
We now use BBL (Berkeley Boot Loader) -- standard RISC-V firmware,
which provides operation in machine mode for us.
We now use standard SBI calls to machine mode, instead of handmade
'syscalls'.
o Remove HTIF bus.
HTIF bus is now legacy and no longer exists in RISC-V specification.
HTIF code still exists in Spike simulator, but BBL do not provide
raw interface to it.
Memory disk is only choice for now to have multiuser booted in Spike,
until Spike has implemented more devices (e.g. Virtio, etc).

Sponsored by: DARPA, AFRL
Sponsored by: HEIF5

show more ...

Add initial DTrace support for RISC-V.

Sponsored by: DARPA, AFRL
Sponsored by: HEIF5

o Add device tree files and kernel configuration files
for RISC-V cpus synthesized on FPGA hardware.
o Include new files to the build.

Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D6091
Sponsored by: DARPA, AFRL
Sponsored by: H

Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D6091
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5

show more ...

MFH

Sponsored by: The FreeBSD Foundation

Add support for ddb(4).

Sponsored by: DARPA, AFRL
Sponsored by: HEIF5