Use symbolic constants instead of "4".
Use arrays instead of relying on struct packing.

Identical md5(scsi_ch.o).

Allocate the devstat structure with devstat_new_entry().

Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is au

Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by: re(scottl)

show more ...

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by: FlexeLint warning #512

Remove usage of cam_extend.c, replace with dev->si_drv1

PR: kern/39809
Approved by: gibbs

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is fu

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

show more ...

Check the void * argument in the AC_FOUND_DEV case against NULL. Whether
correctly or not, this sometimes is propagated up via XPT.

Rewrite of the CAM error recovery code.

Some of the major changes include:

- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better

Rewrite of the CAM error recovery code.

Some of the major changes include:

- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.

- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.

There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.

We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.

- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.

- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.

src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.

libcam/Makefile: libcam now depends on libsbuf.

libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.

bsd.libnames.mk: Add LIBSBUF.

camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.

camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.

Fix a typo.

cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.

Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.

cam.h: Add a new CAM flag, CAM_RETRY_SELTO.

Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().

cam_ccb.h: Add new transfer negotiation structures/types.

Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.

cam_debug.h: Fix typo.

cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().

In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.

cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)

Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().

scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.

scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.

Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.

Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.

Get rid of the last vestiges of a read/write
interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.

aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.

Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.

Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.

Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.

kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.

Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken

show more ...

Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.

Change the peripheral driver list from a linker set to module driven
driver registration. This should allow things like da, sa, cd etc to be
in seperate KLD's to the cam core and make them preloadab

Change the peripheral driver list from a linker set to module driven
driver registration. This should allow things like da, sa, cd etc to be
in seperate KLD's to the cam core and make them preloadable.

show more ...

Remove unused #includes

Reviewed by: ken

Add the use of M_ZERO to some malloc calls.

Submitted by: josh@zipperup.org
Submitted by: Robert Drehmel <robd@gmx.net>
Approved by: gibbs

Remove unneeded <sys/buf.h> includes.

Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.

Fix two problems in the ch(4) driver.

- Mike Smith discovered a panic in the changer probe code if the probe
command (mode sense) fails. So we need to release the CCB used in the
probe before w

Fix two problems in the ch(4) driver.

- Mike Smith discovered a panic in the changer probe code if the probe
command (mode sense) fails. So we need to release the CCB used in the
probe before we unlock the peripheral. (i.e. the same fix mjacob put in
the CD and DA drivers)

- A newline was missing in a warning message. (PR kern/17512)

PR: kern/17512
Submitted by: Louis Mamakos <louie@uu.net> (newline fix)

show more ...

Do the minor changes needed because of change to ccb_getdev structure.
JKH Trading Stamps applied.

Reviewed by: gibbs@freebsd.org, ken@freebsd.org

Add make_dev functions. Tested with only one changer (sigh- all my others
are broken).
Submitted by: ken@freebsd.org

Remove five now unused fields from struct cdevsw. They should never
have been there in the first place. A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty

Remove five now unused fields from struct cdevsw. They should never
have been there in the first place. A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags

show more ...

Remove unneeded disk-related includes.

$Id$ -> $FreeBSD$

Cast pointers to uintptr_t instead of casting them to u_long. Don't
depend on gcc's feature of casting lvalues. Cosmetic.

Simplify cdevsw registration.

The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it. cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

Simplify cdevsw registration.

The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it. cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables. Most places they were used
bogusly. Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
72 bogus makedev() calls
26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed. Patches emailed to authors. LINT
probably broken until they catch up.

show more ...

This commit should be a extensive NO-OP:

Reformat and initialize correctly all "struct cdevsw".

Initialize the d_maj and d_bmaj fields.

The d_reset field was not removed, a

This commit should be a extensive NO-OP:

Reformat and initialize correctly all "struct cdevsw".

Initialize the d_maj and d_bmaj fields.

The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format. Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.

show more ...

Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

scsi_target.c:
Release ATIO structures that wind up in the 'unkown command q

Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

scsi_target.c:
Release ATIO structures that wind up in the 'unkown command queue'
for consumption by our userland counterpart, back to the controller
when the exception for that command is cleared.

show more ...