History log of /freebsd/sys/cam/cam_periph.c (Results 201 – 225 of 412)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0
# 58ccf5b4 11-Jan-2011 John Baldwin <jhb@FreeBSD.org>

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde


# 7c103dde 10-Dec-2010 Kenneth D. Merry <ken@FreeBSD.org>

Fix a few issues related to the XPT_GDEV_ADVINFO CCB.

camcontrol.c: In buildbusdevlist(), don't attempt to get call
getdevid() for an unconfigured device, even when the
verbose flag is set. The

Fix a few issues related to the XPT_GDEV_ADVINFO CCB.

camcontrol.c: In buildbusdevlist(), don't attempt to get call
getdevid() for an unconfigured device, even when the
verbose flag is set. The cam_open_btl() call will almost
certainly fail.

Probe for the buffer size when issuing the XPT_GDEV_ADVINFO
CCB. Probing for the buffer size first helps us avoid
allocating the maximum buffer size when it really may not
be necessary. This also helps avoid errors from
cam_periph_mapmem() if we attempt to map more than MAXPHYS.

cam_periph.c: In cam_periph_mapmem(), if the XPT_GDEV_ADVINFO CCB
shows a bufsiz of 0, we don't have anything to map,
so just return.

Also, set the maximum mapping size to MAXPHYS
instead of DFLTPHYS for XPT_GDEV_ADVINFO CCBs,
since they don't actually go down to the hardware.

scsi_pass.c: Don't bother mapping the buffer in XPT_GDEV_ADVINFO
CCBs if bufsiz is 0.

show more ...


# 0c21a60c 05-Dec-2010 Marcel Moolenaar <marcel@FreeBSD.org>

svn+ssh://svn.freebsd.org/base/head@216199


# 2006fbc8 02-Dec-2010 Dimitry Andric <dim@FreeBSD.org>

Sync: merge r215944 through r216132 from ^/head.


# 06e79492 30-Nov-2010 Kenneth D. Merry <ken@FreeBSD.org>

Add Serial Management Protocol (SMP) passthrough support to CAM.

This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has be

Add Serial Management Protocol (SMP) passthrough support to CAM.

This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is
intended for SMP requests and responses. The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target. (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h: New helper routines for SMP. This includes
SMP request building routines, response parsing
routines, error decoding routines, and structure
definitions for a number of SMP commands.

libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality
is available to userland applications.

camcontrol.8,
camcontrol.c: Add smp passthrough support to camcontrol. Several
new subcommands are now available:

'smpcmd' functions much like 'cmd', except that it
allows the user to send generic SMP commands.

'smprg' sends the SMP report general command, and
displays the decoded output. It will automatically
fetch extended output if it is available.

'smppc' sends the SMP phy control command, with any
number of potential options. Among other things,
this allows the user to reset a phy on a SAS
expander, or disable a phy on an expander.

'smpmaninfo' sends the SMP report manufacturer
information and displays the decoded output.

'smpphylist' displays a list of phys on an
expander, and the CAM devices attached to those
phys, if any.

cam.h,
cam.c: Add a status value for SMP errors
(CAM_SMP_STATUS_ERROR).

Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

Add support for SMP commands to cam_error_string().

cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP
commands are by nature bi-directional, and we may
need to support bi-directional SCSI commands later.

Add the XPT_SMP_IO CCB. Since SMP commands are
bi-directional, there are pointers for both the
request and response.

Add a fill routine for SMP CCBs.

Add the XPT_GDEV_ADVINFO CCB. This is currently
used to fetch cached page 0x83 data from the
transport later, but is extensible to fetch many
other types of data.

cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO
and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c: Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct
cam_ed.

scsi_all.c: Add scsi_get_sas_addr(), a function that parses
VPD page 0x83 data and pulls out a SAS address.

scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a
prototype for scsi_get_sas_addr().

scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and
XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c: In the SCSI probe code, first ask the device for
VPD page 0x00. If any VPD pages are supported,
that page is required to be implemented. Based on
the response, we may probe for the serial number
(page 0x80) or device id (page 0x83).

Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files: Add smp_all.c.

mps.c: Add support for passing in a uio in mps_map_command(),
so we can map a S/G list at once.

Add support for SMP passthrough commands in
mps_data_cb(). SMP is a special case, because the
first buffer in the S/G list is outbound and the
second buffer is inbound.

Add support for warning the user if the busdma code
comes back with more buffers than will work for the
command. This will, for example, help the user
determine why an SMP command failed if busdma comes
back with three buffers.

mps_pci.c: Add sys/uio.h.

mps_sas.c: Add the SAS address and the parent handle to the
list of fields we pull from device page 0 and cache
in struct mpssas_target. These are needed for SMP
passthrough.

Add support for the XPT_SMP_IO CCB. For now, this
CCB is routed to the addressed device if it supports
SMP, or to its parent if it does not and the parent
does. This is necessary because CAM does not
currently support SMP-only nodes in the topology.

Make SMP passthrough support conditional on
__FreeBSD_version >= 900026. This will make it
easier to MFC this change to the driver without
MFCing the CAM changes as well.

mps_user.c: Un-staticize mpi_init_sge() so we can use it for
the SMP passthrough code.

mpsvar.h: Add a uio and iovecs into struct mps_command for
SMP passthrough commands.

Add a cm_max_segs field to struct mps_command so
that we can warn the user if busdma comes back with
too many segments.

Clear the cm_reply when a command gets freed. If
it is not cleared, reply frames will eventually get
freed into the pool multiple times and corrupt the
pool. (This fix is from scottl.)

Add a prototype for mpi_init_sge().

sys/param.h: Bump __FreeBSD_version to 900026 for the for the
inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
CAM CCBs.

show more ...


# 1170f3d1 11-Nov-2010 Dimitry Andric <dim@FreeBSD.org>

Sync: merge r214895 through r215140 from ^/head.


# 0bb3f1d3 08-Nov-2010 Alexander Motin <mav@FreeBSD.org>

When requesting sense data for SIM not doing it automatically (such as
ATAPI or USB), request only as much data as requested by consumer.
On the way back -- report how much sense data we have actuall

When requesting sense data for SIM not doing it automatically (such as
ATAPI or USB), request only as much data as requested by consumer.
On the way back -- report how much sense data we have actually received.

show more ...


Revision tags: release/8.1.0_cvs, release/8.1.0
# 970c23b2 06-Jun-2010 Marcel Moolenaar <marcel@FreeBSD.org>

Merge svn+ssh://svn.freebsd.org/base/head@208879


# f1e2546a 02-Jun-2010 Matt Jacob <mjacob@FreeBSD.org>

Protect periph drivers list and rearrange things to minimize the chance of
stepping oneself during probing.

Don't blindly decrement a periph probe count.

Reviewed by: scsi@
Obtained from: Alexander

Protect periph drivers list and rearrange things to minimize the chance of
stepping oneself during probing.

Don't blindly decrement a periph probe count.

Reviewed by: scsi@
Obtained from: Alexander Motin, Atillio Rao, Others
MFC after: 1 month

show more ...


Revision tags: release/7.3.0_cvs, release/7.3.0
# 1a0fda2b 04-Mar-2010 Dag-Erling Smørgrav <des@FreeBSD.org>

IFH@204581


# 50ae5fde 14-Feb-2010 Alexander Motin <mav@FreeBSD.org>

MFC r203108:
Large set of CAM improvements:
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from

MFC r203108:
Large set of CAM improvements:
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.

show more ...


# 83c5d981 28-Jan-2010 Alexander Motin <mav@FreeBSD.org>

MFp4: Large set of CAM inprovements.

- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many

MFp4: Large set of CAM inprovements.

- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.

show more ...


# 9199c09a 06-Jan-2010 Warner Losh <imp@FreeBSD.org>

Merge from head at r201628.

# This hasn't been tested, and there are at least three bad commits
# that need to be backed out before the branch will be stable again.


# 7e7ac267 02-Dec-2009 Alexander Motin <mav@FreeBSD.org>

MFC r199279, r199280, r199281:
- Fix several device freeze counting bugs.
- Remove code that years ago was closing race between request submission
to SIM and device/SIM freeze. That race become impos

MFC r199279, r199280, r199281:
- Fix several device freeze counting bugs.
- Remove code that years ago was closing race between request submission
to SIM and device/SIM freeze. That race become impossible after moving from
spl to mutex locking, while this workaround causes some unexpected effects.

show more ...


Revision tags: release/8.0.0_cvs, release/8.0.0
# 6bb75297 17-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFC r198947:
Implement device stats accounting for ATA commands.


# 33e000ff 17-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFC r198849:
Improve reporting ATA Status error details.


# 844c81cb 17-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFC r198394:
Make "Retrying Command" to be printed before actual retrying.
It should make debug/error log a bit more readable.


# 4956ef3a 17-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFC r198382, r198385:
Replace most of priority numbers with defines. No logical changes.


# 71f045ca 17-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFC r197421:
If on sense request device returns no sence, give up and return,
or we may loop forever.


# 1f1158b2 14-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFp4:
Some more missed parts from previous commits.


# d84c90a6 14-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFp4:
Fix several device freeze counting bugs.


# 874108ae 12-Nov-2009 Oleksandr Tymoshenko <gonzo@FreeBSD.org>

MFC @199204


# 379ad358 05-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFp4:
Implement device stats accounting for ATA commands.


# 8691755d 03-Nov-2009 Alexander Motin <mav@FreeBSD.org>

MFp4:
Improve reporting ATA Status error details.


# 0f3e2159 23-Oct-2009 Alexander Motin <mav@FreeBSD.org>

Make "Retrying Command" to be printed before actual retrying.
It should make debug/error log a bit more readable.


12345678910>>...17