| LINT (86415b71f966af3316ba32c81da9b39a8a77893f) | LINT (2ad872c5794e4c26fdf6ed219ad3f09ca0d5304a) |
|---|---|
| 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# | 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# |
| 5# $Id: LINT,v 1.529 1999/01/09 18:12:07 wpaul Exp $ | 5# $Id: LINT,v 1.531 1999/01/10 07:45:33 phk Exp $ |
| 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 823 unchanged lines hidden (view full) --- 837 838options "NTIMECOUNTER=20" 839 840# Enable PnP support in the kernel. This allows you to automaticly 841# attach to PnP cards for drivers that support it and allows you to 842# configure cards from USERCONFIG. See pnp(4) for more info. 843controller pnp0 844 | 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 823 unchanged lines hidden (view full) --- 837 838options "NTIMECOUNTER=20" 839 840# Enable PnP support in the kernel. This allows you to automaticly 841# attach to PnP cards for drivers that support it and allows you to 842# configure cards from USERCONFIG. See pnp(4) for more info. 843controller pnp0 844 |
| 845# The keyboard controller; it controlls the keyboard and the PS/2 mouse. 846controller atkbdc0 at isa? port IO_KBD tty 847 848# The AT keyboard 849device atkbd0 at isa? tty irq 1 850 851# PS/2 mouse 852device psm0 at isa? tty irq 12 853 854# Options for psm: 855options PSM_HOOKAPM #hook the APM resume event, useful 856 #for some laptops 857options PSM_RESETAFTERSUSPEND #reset the device at the resume event 858 859# The video card driver. 860device vga0 at isa? port ? conflicts 861 862# Splash screen at start up! Screen savers require this too. 863pseudo-device splash 864 |
|
| 845# The pcvt console driver (vt220 compatible). | 865# The pcvt console driver (vt220 compatible). |
| 846device vt0 at isa? port IO_KBD conflicts tty irq 1 | 866device vt0 at isa? tty |
| 847options XSERVER # support for running an X server. 848options FAT_CURSOR # start with block cursor 849# This PCVT option is for keyboards such as those used on IBM ThinkPad laptops 850options PCVT_SCANSET=2 # IBM keyboards are non-std 851 852# The syscons console driver (sco color console compatible). | 867options XSERVER # support for running an X server. 868options FAT_CURSOR # start with block cursor 869# This PCVT option is for keyboards such as those used on IBM ThinkPad laptops 870options PCVT_SCANSET=2 # IBM keyboards are non-std 871 872# The syscons console driver (sco color console compatible). |
| 853device sc0 at isa? port IO_KBD conflicts tty irq 1 | 873device sc0 at isa? tty |
| 854options MAXCONS=16 # number of virtual consoles 855options SLOW_VGA # do byte-wide i/o's to TS and GDC regs 856options "STD8X16FONT" # Compile font in 857makeoptions "STD8X16FONT"="cp850" 858options SC_HISTORY_SIZE=200 # number of history buffer lines 859options SC_DISABLE_REBOOT # disable reboot key sequence 860# Try the following option if the mouse pointer is not drawn correctly 861# or font does not seem to be loaded properly. May cause flicker on --- 183 unchanged lines hidden (view full) --- 1045# have an Insight floppy tape. Probing them proved to be dangerous 1046# for people with floppy disks only, so it's "hidden" behind a flag: 1047#controller fdc0 at isa? port "IO_FD1" bio flags 1 irq 6 drq 2 1048 1049disk fd0 at fdc0 drive 0 1050disk fd1 at fdc0 drive 1 1051 1052# | 874options MAXCONS=16 # number of virtual consoles 875options SLOW_VGA # do byte-wide i/o's to TS and GDC regs 876options "STD8X16FONT" # Compile font in 877makeoptions "STD8X16FONT"="cp850" 878options SC_HISTORY_SIZE=200 # number of history buffer lines 879options SC_DISABLE_REBOOT # disable reboot key sequence 880# Try the following option if the mouse pointer is not drawn correctly 881# or font does not seem to be loaded properly. May cause flicker on --- 183 unchanged lines hidden (view full) --- 1065# have an Insight floppy tape. Probing them proved to be dangerous 1066# for people with floppy disks only, so it's "hidden" behind a flag: 1067#controller fdc0 at isa? port "IO_FD1" bio flags 1 irq 6 drq 2 1068 1069disk fd0 at fdc0 drive 0 1070disk fd1 at fdc0 drive 1 1071 1072# |
| 1053# Other standard PC hardware: `lpt', `mse', `psm', `sio', etc. | 1073# Other standard PC hardware: `lpt', `mse', `sio', etc. |
| 1054# 1055# lpt: printer port 1056# lpt specials: 1057# The port may be specified as ?. This will cause the 1058# driver to scan the BIOS port list. 1059# The irq clause may be omitted. This will force the port 1060# into polling mode. 1061# mse: Logitech and ATI InPort bus mouse ports | 1074# 1075# lpt: printer port 1076# lpt specials: 1077# The port may be specified as ?. This will cause the 1078# driver to scan the BIOS port list. 1079# The irq clause may be omitted. This will force the port 1080# into polling mode. 1081# mse: Logitech and ATI InPort bus mouse ports |
| 1062# psm: PS/2 mouse port [note: conflicts with sc0/vt0, thus "conflicts" keywd] | |
| 1063# sio: serial ports (see sio(4)) 1064 1065device lpt0 at isa? port? tty irq 7 1066device lpt1 at isa? port "IO_LPT3" tty irq 5 1067device mse0 at isa? port 0x23c tty irq 5 | 1082# sio: serial ports (see sio(4)) 1083 1084device lpt0 at isa? port? tty irq 7 1085device lpt1 at isa? port "IO_LPT3" tty irq 5 1086device mse0 at isa? port 0x23c tty irq 5 |
| 1068device psm0 at isa? port IO_KBD conflicts tty irq 12 | |
| 1069 | 1087 |
| 1070# Options for psm: 1071options PSM_HOOKAPM #hook the APM resume event, useful 1072 #for some laptops 1073options PSM_RESETAFTERSUSPEND #reset the device at the resume event 1074 | |
| 1075device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 1076 1077# 1078# `flags' for serial drivers that support consoles (only for sio now): 1079# 0x10 enable console support for this unit. The other console flags 1080# are ignored unless this is set. Enabling console support does 1081# not make the unit the preferred console - boot with -h or set 1082# the 0x20 flag for that. Currently, at most one unit can have --- 900 unchanged lines hidden --- | 1088device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 1089 1090# 1091# `flags' for serial drivers that support consoles (only for sio now): 1092# 0x10 enable console support for this unit. The other console flags 1093# are ignored unless this is set. Enabling console support does 1094# not make the unit the preferred console - boot with -h or set 1095# the 0x20 flag for that. Currently, at most one unit can have --- 900 unchanged lines hidden --- |