xref: /titanic_52/usr/src/uts/i86xpv/Makefile.files (revision 551bc2a66868b5cb5be6b70ab9f55515e77a39a9)

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#ident	"%Z%%M%	%I%	%E% SMI"
#
#	This Makefile defines file modules in the directory uts/i86xpv
#	and its children. These are the source files which are i86xpv
#	"implementation architecture" dependent.
#

#
#	object lists
#
CORE_OBJS +=			\
	acpi_stubs.o		\
	balloon.o		\
	biosdisk.o		\
	cbe.o			\
	cmi.o			\
	cmi_hw.o		\
	cms.o			\
	confunix.o		\
	cpuid.o			\
	cpupm.o			\
	dis_tables.o		\
	ddi_impl.o		\
	dtrace_subr.o		\
	dvma.o			\
	fakebop.o		\
	fpu_subr.o		\
	graphics.o		\
	hardclk.o		\
	hat_i86.o		\
	hat_kdi.o		\
	hment.o			\
	hold_page.o		\
	hrtimers.o		\
	htable.o		\
	i86_mmu.o		\
	instr_size.o		\
	intr.o			\
	kboot_mmu.o		\
	kdi_subr.o		\
	kdi_idt.o		\
	kdi_idthdl.o		\
	kdi_asm.o		\
	lgrpplat.o		\
	mach_kdi.o		\
	mach_sysconfig.o	\
	machdep.o		\
	mem_config_stubs.o	\
	memnode.o		\
	microcode.o		\
	mlsetup.o		\
	mp_call.o		\
	mp_implfuncs.o		\
	mp_machdep.o		\
	mp_startup.o		\
	memscrub.o		\
	notes.o			\
	pci_bios.o		\
	pci_cfgspace.o		\
	pci_mech1.o		\
	pci_mech2.o		\
	pci_neptune.o		\
	pci_orion.o		\
	pmem.o			\
	ppage.o			\
	startup.o		\
	xpv_timestamp.o		\
	todpc_subr.o		\
	trap.o			\
	vm_machdep.o		\
	x_call.o

#
#	Add the SMBIOS subsystem object files directly to the list of objects
#	built into unix itself; this is all common code except for smb_dev.c.
#
CORE_OBJS += $(SMBIOS_OBJS)

#
# These get compiled twice:
# - once in the dboot (direct boot) identity mapped code
# - once for use during early startup in unix
#
BOOT_DRIVER_OBJS =		\
	boot_console.o		\
	boot_keyboard.o		\
	boot_keyboard_table.o	\
	boot_mmu.o		\
	boot_vga.o		\
	boot_xconsole.o

CORE_OBJS += $(BOOT_DRIVER_OBJS)

#
# Extra XEN files separated out for now.
#
CORE_OBJS +=			\
	cpr_driver.o		\
	evtchn.o		\
	gnttab.o		\
	hypercall.o		\
	hyperevent.o		\
	hypersubr.o		\
	mp_xen.o		\
	panic_asm.o		\
	xenguest.o		\
	xenbus_client.o		\
	xenbus_comms.o		\
	xenbus_probe.o		\
	xenbus_xs.o		\
	xen_machdep.o		\
	xen_mmu.o		\
	xpv_panic.o		\
	xvdi.o

#
#	locore.o is special. It must be the first file relocated so that it
#	it is relocated just where its name implies.
#
SPECIAL_OBJS_32 +=		\
	locore.o		\
	fast_trap_asm.o		\
	interrupt.o		\
	syscall_asm.o

SPECIAL_OBJS_64 +=		\
	locore.o		\
	fast_trap_asm.o		\
	interrupt.o		\
	syscall_asm_amd64.o

SPECIAL_OBJS += $(SPECIAL_OBJS_$(CLASS))

#
# object files used to boot into full kernel
#
DBOOT_OBJS_32 =	muldiv.o

DBOOT_OBJS_64 =

DBOOT_OBJS +=			\
	dboot_asm.o		\
	dboot_printf.o		\
	dboot_startkern.o	\
	dboot_xen.o		\
	hypercall.o		\
	hypersubr.o		\
	memcpy.o		\
	memset.o		\
	string.o		\
	$(BOOT_DRIVER_OBJS)	\
	$(DBOOT_OBJS_$(CLASS))

#
#			driver & misc modules
#
ISANEXUS_OBJS += isa.o dma_engine.o i8237A.o
DOMCAPS_OBJS += domcaps.o
BALLOON_OBJS += balloon_drv.o
EVTCHN_OBJS += evtchn_dev.o
GFX_PRIVATE_OBJS += gfx_private.o gfxp_pci.o gfxp_segmap.o \
		    gfxp_devmap.o gfxp_vgatext.o gfxp_vm.o vgasubr.o
PCI_E_MISC_OBJS += pcie_error.o
PCI_E_NEXUS_OBJS += npe.o npe_misc.o
PCI_E_NEXUS_OBJS += pci_common.o pci_kstats.o pci_tools.o
PCINEXUS_OBJS += pci.o pci_common.o pci_kstats.o pci_tools.o
PRIVCMD_OBJS += seg_mf.o privcmd.o privcmd_hcall.o
ROOTNEX_OBJS += rootnex.o
XPVTOD_OBJS += xpvtod.o
XPV_AUTOCONFIG_OBJS += xpv_autoconfig.o
XPV_PSM_OBJS += xpv_psm.o mp_platform_common.o apic_introp.o psm_common.o
XENBUS_OBJS += xenbus_dev.o
XENCONS_OBJS += xencons.o
XPVD_OBJS += xpvd.o
XNB_OBJS += xnb.o
XNBE_OBJS += xnbe.o
XNBO_OBJS += xnbo.o
XNBU_OBJS += xnbu.o
XNF_OBJS += xnf.o
XSVC_OBJS += xsvc.o
XDF_OBJS += xdf.o
XDB_OBJS += xdb.o

#
#	Build up defines and paths.
#
INC_PATH	+= -I$(UTSBASE)/i86xpv -I$(UTSBASE)/i86pc -I$(SRC)/common \
	-I$(UTSBASE)/common/xen

#
# Since the assym files are derived, the dependencies must be explicit for
# all files including this file. (This is only actually required in the
# instance when the .nse_depinfo file does not exist.) It may seem that
# the lint targets should also have a similar dependency, but they don't
# since only C headers are included when #defined(__lint) is true.
#

ASSYM_DEPS      += 		\
	copy.o			\
	desctbls_asm.o		\
	ddi_i86_asm.o		\
	exception.o		\
	fast_trap_asm.o		\
	float.o			\
	hyperevent.o		\
	i86_subr.o		\
	kdi_asm.o		\
	interrupt.o		\
	lock_prim.o		\
	locore.o		\
	panic_asm.o		\
	sseblk.o		\
	swtch.o			\
	syscall_asm.o		\
	syscall_asm_amd64.o

$(KDI_ASSYM_DEPS:%=$(OBJS_DIR)/%):	$(DSF_DIR)/$(OBJS_DIR)/kdi_assym.h

ASSYM_DEPS += kdi_asm.o