1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SYS_SCSI_GENERIC_COMMANDS_H 28 #define _SYS_SCSI_GENERIC_COMMANDS_H 29 30 #ifdef __cplusplus 31 extern "C" { 32 #endif 33 34 /* 35 * Standard SCSI Command Definitions 36 * 37 * Macros to determine known command sizes 38 */ 39 #define CDB_GROUPID(cmd) ((cmd >> 5) & 0x7) 40 #define CDB_GROUPID_0 0 41 #define CDB_GROUPID_1 1 42 #define CDB_GROUPID_2 2 43 #define CDB_GROUPID_3 3 44 #define CDB_GROUPID_4 4 45 #define CDB_GROUPID_5 5 46 #define CDB_GROUPID_6 6 47 #define CDB_GROUPID_7 7 48 49 #define CDB_GROUP0 6 /* 6-byte cdb's */ 50 #define CDB_GROUP1 10 /* 10-byte cdb's */ 51 #define CDB_GROUP2 10 /* 10-byte cdb's */ 52 #define CDB_GROUP3 0 /* reserved */ 53 #define CDB_GROUP4 16 /* 16-byte cdb's */ 54 #define CDB_GROUP5 12 /* 12-byte cdb's */ 55 #define CDB_GROUP6 0 /* reserved */ 56 #define CDB_GROUP7 0 /* reserved */ 57 58 /* 59 * Generic Command Definitions 60 * NOTE: CDROM commands are defined in cdio.h 61 */ 62 63 /* 64 * Group 0 Commands (CDB range 0x00 - 0x1F) 65 */ 66 #define SCMD_GROUP0 0x00 67 68 /* 69 * Group 0 commands, All Devices 70 */ 71 #define SCMD_TEST_UNIT_READY 0x00 72 #define SCMD_REQUEST_SENSE 0x03 73 #define SCMD_INQUIRY 0x12 74 #define SCMD_COPY 0x18 75 #define SCMD_GDIAG 0x1C /* receive diagnostic results */ 76 #define SCMD_SDIAG 0x1D /* send diagnostic results */ 77 78 /* 79 * Group 0 commands, Direct Access Devices 80 */ 81 /* SCMD_TEST_UNIT_READY 0x00 */ 82 #define SCMD_REZERO_UNIT 0x01 83 /* SCMD_REQUEST_SENSE 0x03 */ 84 #define SCMD_FORMAT 0x04 85 #define SCMD_REASSIGN_BLOCK 0x07 86 #define SCMD_READ 0x08 87 #define SCMD_WRITE 0x0a 88 #define SCMD_SEEK 0x0b 89 /* SCMD_INQUIRY 0x12 */ 90 #define SCMD_MODE_SELECT 0x15 91 #define SCMD_RESERVE 0x16 92 #define SCMD_RELEASE 0x17 93 /* SCMD_COPY 0x18 */ 94 #define SCMD_MODE_SENSE 0x1a 95 #define SCMD_START_STOP 0x1b 96 /* SCMD_GDIAG 0x1C */ 97 /* SCMD_SDIAG 0x1D */ 98 #define SCMD_DOORLOCK 0x1E /* Prevent/Allow Medium Removal */ 99 100 /* 101 * Group 0 commands, Sequential Access Devices 102 */ 103 /* SCMD_TEST_UNIT_READY 0x00 */ 104 #define SCMD_REWIND 0x01 /* Note similarity to SCMD_REZERO */ 105 /* SCMD_REQUEST_SENSE 0x03 */ 106 #define SCMD_READ_BLKLIM 0x05 107 /* SCMD_READ 0x08 */ 108 /* SCMD_WRITE 0x0a */ 109 #define SCMD_TRK_SEL 0x0b /* Note similarity to SCMD_SEEK */ 110 #define SCMD_READ_REVERSE 0x0f 111 #define SCMD_WRITE_FILE_MARK 0x10 112 #define SCMD_SPACE 0x11 113 /* SCMD_INQUIRY 0x12 */ 114 #define SCMD_VERIFY_G0 0x13 115 #define SCMD_RECOVER_BUF 0x14 116 /* SCMD_MODE_SELECT 0x15 */ 117 /* SCMD_RESERVE 0x16 */ 118 /* SCMD_RELEASE 0x17 */ 119 /* SCMD_COPY 0x18 */ 120 #define SCMD_ERASE 0x19 121 /* SCMD_MODE_SENSE 0x1a */ 122 #define SCMD_LOAD 0x1b /* Note similarity to SCMD_START_STOP */ 123 /* SCMD_GDIAG 0x1c */ 124 /* SCMD_SDIAG 0x1d */ 125 /* SCMD_DOORLOCK 0x1e */ 126 127 128 /* 129 * Group 0 commands, Printer Devices 130 */ 131 /* SCMD_TEST_UNIT_READY 0x00 */ 132 /* SCMD_REQUEST_SENSE 0x03 */ 133 /* SCMD_FORMAT 0x04 */ 134 #define SCMD_PRINT 0x0a /* Note similarity to SCMD_WRITE */ 135 #define SCMD_SLEW_PRINT 0x0b /* ? similar to SCMD_SEEK ? */ 136 #define SCMD_FLUSH_PRINT_BUF 0x10 /* ? similar to SCMD_WRITE_FILE_MARK */ 137 /* SCMD_INQUIRY 0x12 */ 138 /* SCMD_RECOVER_BUF 0x14 */ 139 /* SCMD_MODE_SELECT 0x15 */ 140 /* SCMD_RESERVE 0x16 */ 141 /* SCMD_RELEASE 0x17 */ 142 /* SCMD_COPY 0x18 */ 143 /* SCMD_MODE_SENSE 0x1a */ 144 #define SCMD_STOP_PRINT 0x1b /* Note similarity to SCMD_START_STOP */ 145 /* SCMD_GDIAG 0x1c */ 146 /* SCMD_SDIAG 0x1d */ 147 148 /* 149 * Group 0 commands, Processor Devices 150 */ 151 /* SCMD_TEST_UNIT_READY 0x00 */ 152 /* SCMD_REQUEST_SENSE 0x03 */ 153 #define SCMD_RECEIVE 0x08 /* Note similarity to SCMD_READ */ 154 #define SCMD_SEND 0x0a /* Note similarity to SCMD_WRITE */ 155 /* SCMD_INQUIRY 0x12 */ 156 /* SCMD_COPY 0x18 */ 157 /* SCMD_MODE_SENSE 0x1a */ 158 /* SCMD_GDIAG 0x1c */ 159 /* SCMD_SDIAG 0x1d */ 160 161 /* 162 * Group 0 commands, WORM Devices 163 */ 164 /* SCMD_TEST_UNIT_READY 0x00 */ 165 /* SCMD_REZERO_UNIT 0x01 */ 166 /* SCMD_REQUEST_SENSE 0x03 */ 167 /* SCMD_REASSIGN_BLOCK 0x07 */ 168 /* SCMD_READ 0x08 */ 169 /* SCMD_WRITE 0x0a */ 170 /* SCMD_SEEK 0x0b */ 171 /* SCMD_INQUIRY 0x12 */ 172 /* SCMD_MODE_SELECT 0x15 */ 173 /* SCMD_RESERVE 0x16 */ 174 /* SCMD_RELEASE 0x17 */ 175 /* SCMD_COPY 0x18 */ 176 /* SCMD_MODE_SENSE 0x1a */ 177 /* SCMD_START_STOP 0x1b */ 178 /* SCMD_GDIAG 0x1C */ 179 /* SCMD_SDIAG 0x1D */ 180 /* SCMD_DOORLOCK 0x1E */ 181 182 /* 183 * Group 0 commands, Read Only Devices 184 */ 185 /* SCMD_TEST_UNIT_READY 0x00 */ 186 /* SCMD_REZERO_UNIT 0x01 */ 187 /* SCMD_REQUEST_SENSE 0x03 */ 188 /* SCMD_REASSIGN_BLOCK 0x07 */ 189 /* SCMD_READ 0x08 */ 190 /* SCMD_SEEK 0x0b */ 191 /* SCMD_INQUIRY 0x12 */ 192 /* SCMD_MODE_SELECT 0x15 */ 193 /* SCMD_RESERVE 0x16 */ 194 /* SCMD_RELEASE 0x17 */ 195 /* SCMD_COPY 0x18 */ 196 /* SCMD_MODE_SENSE 0x1a */ 197 /* SCMD_START_STOP 0x1b */ 198 /* SCMD_GDIAG 0x1C */ 199 /* SCMD_SDIAG 0x1D */ 200 /* SCMD_DOORLOCK 0x1E */ 201 202 /* 203 * Group 1 Commands (CDB range 0x20 - 0x3F) 204 */ 205 #define SCMD_GROUP1 0x20 206 207 /* 208 * Group 1 Commands, All Devices 209 */ 210 #define SCMD_COMPARE 0x39 211 #define SCMD_COPY_VERIFY 0x3A 212 #define SCMD_PERSISTENT_RESERVE_IN 0x5E 213 #define SCMD_PERSISTENT_RESERVE_OUT 0x5F 214 #define SCMD_PRIN SCMD_PERSISTENT_RESERVE_IN 215 #define SCMD_PROUT SCMD_PERSISTENT_RESERVE_OUT 216 217 /* 218 * Group 1 Commands, Direct Access Devices 219 */ 220 #define SCMD_READ_FORMAT_CAP 0x23 221 #define SCMD_READ_CAPACITY 0x25 222 #define SCMD_READ_G1 0x28 /* Note that only the group changed */ 223 #define SCMD_WRITE_G1 0x2a /* Note that only the group changed */ 224 #define SCMD_SEEK_G1 0x2b /* Note that only the group changed */ 225 #define SCMD_WRITE_VERIFY 0x2e 226 #define SCMD_VERIFY 0x2f 227 #define SCMD_SEARCH_HIGH 0x30 228 #define SCMD_SEARCH_EQUAL 0x31 229 #define SCMD_SEARCH_LOW 0x32 230 #define SCMD_SET_LIMITS 0x33 231 #define SCMD_SYNCHRONIZE_CACHE 0x35 232 #define SCMD_READ_DEFECT_LIST 0x37 233 #define SCMD_WRITE_BUFFER 0x3B 234 #define SCMD_READ_BUFFER 0x3c 235 #define SCMD_READ_LONG 0x3E 236 #define SCMD_WRITE_LONG 0x3F 237 #define SCMD_RESERVE_G1 0x56 238 #define SCMD_RELEASE_G1 0x57 239 #define SCMD_MODE_SELECT_G1 0x55 240 #define SCMD_MODE_SENSE_G1 0x5A 241 #define SCMD_GET_CONFIGURATION 0x46 242 #define SCMD_LOG_SELECT_G1 0x4C 243 #define SCMD_LOG_SENSE_G1 0x4d 244 245 246 /* 247 * Group 1 Commands, Sequential Access Devices 248 */ 249 #define SCMD_LOCATE 0x2B /* Note similarity to SCMD_SEEK_G1 */ 250 #define SCMD_READ_POSITION 0x34 251 #define SCMD_REPORT_DENSITIES 0x44 252 253 /* 254 * Group 1 Commands, Printer Devices 255 */ 256 /* (None Defined) */ 257 258 /* 259 * Group 1 Commands, Processor Devices 260 */ 261 /* (None Defined) */ 262 263 /* 264 * Group 1 Commands, WORM Devices 265 */ 266 /* SCMD_READ_CAPACITY 0x25 */ 267 /* SCMD_READ_G1 0x28 */ 268 /* SCMD_WRITE_G1 0x2a */ 269 /* SCMD_SEEK_G1 0x2b */ 270 /* SCMD_WRITE_VERIFY 0x2e */ 271 /* SCMD_VERIFY 0x2f */ 272 /* SCMD_SEARCH_HIGH 0x30 */ 273 /* SCMD_SEARCH_EQUAL 0x31 */ 274 /* SCMD_SEARCH_LOW 0x32 */ 275 /* SCMD_SET_LIMITS 0x33 */ 276 277 /* 278 * Group 1 Commands, Read Only Devices 279 */ 280 /* SCMD_READ_CAPACITY 0x25 */ 281 /* SCMD_READ_G1 0x28 */ 282 /* SCMD_SEEK_G1 0x2b */ 283 /* SCMD_VERIFY 0x2f */ 284 /* SCMD_SEARCH_HIGH 0x30 */ 285 /* SCMD_SEARCH_EQUAL 0x31 */ 286 /* SCMD_SEARCH_LOW 0x32 */ 287 /* SCMD_SET_LIMITS 0x33 */ 288 289 /* 290 * Group 1 Commands, MMC Devices 291 */ 292 293 /* GET EVENT STATUS NOTIFICATION, MMC-3 5.6 */ 294 #define SCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a 295 296 /* event header */ 297 #define SD_GESN_HEADER_LEN 4 298 #define SD_GESN_HEADER_NEA 0x80 /* byte 2 */ 299 #define SD_GESN_HEADER_CLASS 0x07 /* byte 2 */ 300 301 /* media class event class and event data that follows the header */ 302 #define SD_GESN_MEDIA_CLASS 4 303 304 #define SD_GESN_MEDIA_DATA_LEN 4 305 #define SD_GESN_MEDIA_EVENT_CODE 0x0f /* byte 0 */ 306 #define SD_GESN_MEDIA_EVENT_STATUS_PRESENT 0x02 /* byte 1 */ 307 #define SD_GESN_MEDIA_EVENT_STATUS_TRAY_OPEN 0x01 /* byte 1 */ 308 309 /* media event code */ 310 #define SD_GESN_MEDIA_EVENT_NOCHG 0 311 #define SD_GESN_MEDIA_EVENT_EJECTREQUEST 1 312 #define SD_GESN_MEDIA_EVENT_NEWMEDIA 2 313 #define SD_GESN_MEDIA_EVENT_MEDIAREMOVAL 3 314 #define SD_GESN_MEDIA_EVENT_MEDIACHANGED 4 315 #define SD_GESN_MEDIA_EVENT_BGFORMATCOMPLETED 5 316 #define SD_GESN_MEDIA_EVENT_BGFORMATRESTARTED 6 317 318 319 /* 320 * Group 3 Commands 321 */ 322 #define SCMD_VAR_LEN 0x7f 323 324 /* 325 * Group 4 Commands, All Devices 326 */ 327 #define SCMD_GROUP4 0x80 328 #define SCMD_EXTENDED_COPY 0x83 329 #define SCMD_VERIFY_G4 0x8f 330 331 /* 332 * Group 4 Commands, Direct Access Devices 333 */ 334 #define SCMD_READ_G4 0x88 335 #define SCMD_WRITE_G4 0x8a 336 #define SCMD_SVC_ACTION_IN_G4 0x9e 337 #define SCMD_SVC_ACTION_OUT_G4 0x9f 338 339 /* 340 * Group 4 Service Actions for Service Action In (16) 341 */ 342 #define SSVC_ACTION_READ_CAPACITY_G4 0x10 343 #define SSVC_ACTION_READ_LONG_G4 0x11 344 345 /* 346 * Group 4 Service Actions for Service Action Out (16) 347 */ 348 #define SSVC_ACTION_WRITE_LONG_G4 0x11 349 350 /* 351 * Group 4 Commands, Sequential Access Devics 352 */ 353 #define SCMD_WRITE_FILE_MARK_G4 0x80 354 #define SCMD_READ_REVERSE_G4 0x81 355 #define SCMD_READ_ATTRIBUTE 0x8c 356 #define SCMD_WRITE_ATTRIBUTE 0x8d 357 #define SCMD_SPACE_G4 0x91 358 #define SCMD_LOCATE_G4 0x92 359 360 /* 361 * Group 5 commands. 362 */ 363 #define SCMD_GROUP5 0xA0 364 #define SCMD_REPORT_LUNS 0xA0 365 #define SCMD_SECURITY_PROTO_IN 0xA2 366 #define SCMD_MAINTENANCE_IN 0xA3 367 #define SCMD_MAINTENANCE_OUT 0xA4 368 #define SCMD_READ_G5 0xA8 369 #define SCMD_WRITE_G5 0xAA 370 #define SCMD_SVC_ACTION_OUT_G5 0xA9 371 #define SCMD_SVC_ACTION_IN_G5 0xAB 372 #define SCMD_GET_PERFORMANCE 0xAC 373 #define SCMD_VERIFY_G5 0xAF 374 #define SCMD_SECURITY_PROTO_OUT 0xB5 375 376 /* 377 * Group 5 Service Actions for Maintenance In (12) 378 */ 379 #define SSVC_ACTION_GET_TARGET_PORT_GROUPS 0x0a 380 #define SSVC_ACTION_GET_SUPPORTED_OPERATIONS 0x0c 381 #define SSVC_SCTION_GET_SUPPORTED_MANAGEMENT 0x0d 382 #define SSVC_ACTION_GET_TIMESTAMP 0x0f 383 384 /* 385 * Group 5 Service Actions for Maintenance Out (12) 386 */ 387 #define SSVC_ACTION_SET_DEVICE_IDENTIFIER 0x06 388 #define SSVC_ACTION_SET_PRIORITY 0x0e 389 #define SSVC_ACTION_SET_TARGET_PORT_GROUPS 0x0a 390 #define SSVC_ACTION_SET_TIMESTAMP 0x0f 391 392 /* 393 * Group 5 Service Actions for Service Action In (12) 394 */ 395 #define SSVC_ACTION_READ_MEDIA_SERIAL 0x01 396 /* 397 * scsi_key_strings for SCMD_ definitions 398 * NOTE: see SCSI_CMDS_KEY_STRINGS_CDIO in cdio.h for additional 399 * command-to-string translations. 400 */ 401 #define SCSI_CMDS_KEY_STRINGS \ 402 /* 0x00 */ SCMD_TEST_UNIT_READY, "test_unit_ready", \ 403 /* 0x01 */ SCMD_REWIND | \ 404 SCMD_REZERO_UNIT, "rezero/rewind", \ 405 /* 0x03 */ SCMD_REQUEST_SENSE, "request_sense", \ 406 /* 0x04 */ SCMD_FORMAT, "format", \ 407 /* 0x05 */ SCMD_READ_BLKLIM, "read_block_limits", \ 408 /* 0x07 */ SCMD_REASSIGN_BLOCK, "reassign", \ 409 /* 0x08 */ SCMD_READ | \ 410 SCMD_RECEIVE, "read", \ 411 /* 0x0a */ SCMD_PRINT | \ 412 SCMD_SEND | \ 413 SCMD_WRITE, "write", \ 414 /* 0x0b */ SCMD_SEEK | \ 415 SCMD_SLEW_PRINT | \ 416 SCMD_TRK_SEL, "seek", \ 417 /* 0x0f */ SCMD_READ_REVERSE, "read_reverse", \ 418 /* 0x10 */ SCMD_WRITE_FILE_MARK | \ 419 SCMD_FLUSH_PRINT_BUF, "write_file_mark", \ 420 /* 0x11 */ SCMD_SPACE, "space", \ 421 /* 0x12 */ SCMD_INQUIRY, "inquiry", \ 422 /* 0x13 */ SCMD_VERIFY_G0, "verify", \ 423 /* 0x14 */ SCMD_RECOVER_BUF, "recover_buffer_data", \ 424 /* 0x15 */ SCMD_MODE_SELECT, "mode_select", \ 425 /* 0x16 */ SCMD_RESERVE, "reserve", \ 426 /* 0x17 */ SCMD_RELEASE, "release", \ 427 /* 0x18 */ SCMD_COPY, "copy", \ 428 /* 0x19 */ SCMD_ERASE, "erase_tape", \ 429 /* 0x1a */ SCMD_MODE_SENSE, "mode_sense", \ 430 /* 0x1b */ SCMD_LOAD | \ 431 SCMD_START_STOP | \ 432 SCMD_STOP_PRINT, "load/start/stop", \ 433 /* 0x1c */ SCMD_GDIAG, "get_diagnostic_results", \ 434 /* 0x1d */ SCMD_SDIAG, "send_diagnostic_command", \ 435 /* 0x1e */ SCMD_DOORLOCK, "door_lock", \ 436 /* 0x23 */ SCMD_READ_FORMAT_CAP, "read_format_capacity", \ 437 /* 0x25 */ SCMD_READ_CAPACITY, "read_capacity", \ 438 /* 0x28 */ SCMD_READ_G1, "read(10)", \ 439 /* 0x2a */ SCMD_WRITE_G1, "write(10)", \ 440 /* 0x2b */ SCMD_SEEK_G1 | \ 441 SCMD_LOCATE, "seek(10)", \ 442 /* 0x2e */ SCMD_WRITE_VERIFY, "write_verify", \ 443 /* 0x2f */ SCMD_VERIFY, "verify(10)", \ 444 /* 0x30 */ SCMD_SEARCH_HIGH, "search_data_high", \ 445 /* 0x31 */ SCMD_SEARCH_EQUAL, "search_data_equal", \ 446 /* 0x32 */ SCMD_SEARCH_LOW, "search_data_low", \ 447 /* 0x33 */ SCMD_SET_LIMITS, "set_limits", \ 448 /* 0x34 */ SCMD_READ_POSITION, "read_position", \ 449 /* 0x35 */ SCMD_SYNCHRONIZE_CACHE, "synchronize_cache", \ 450 /* 0x37 */ SCMD_READ_DEFECT_LIST, "read_defect_data", \ 451 /* 0x39 */ SCMD_COMPARE, "compare", \ 452 /* 0x3a */ SCMD_COPY_VERIFY, "copy_verify", \ 453 /* 0x3b */ SCMD_WRITE_BUFFER, "write_buffer", \ 454 /* 0x3c */ SCMD_READ_BUFFER, "read_buffer", \ 455 /* 0x3e */ SCMD_READ_LONG, "read_long", \ 456 /* 0x3f */ SCMD_WRITE_LONG, "write_long", \ 457 /* 0x44 */ SCMD_REPORT_DENSITIES | \ 458 /* SCMD_READ_HEADER (from cdio.h) | */ \ 459 0, "report_densities/read_header", \ 460 /* 0x4c */ SCMD_LOG_SELECT_G1, "log_select", \ 461 /* 0x4d */ SCMD_LOG_SENSE_G1, "log_sense", \ 462 /* 0x55 */ SCMD_MODE_SELECT_G1, "mode_select(10)", \ 463 /* 0x56 */ SCMD_RESERVE_G1, "reserve(10)", \ 464 /* 0x57 */ SCMD_RELEASE_G1, "release(10)", \ 465 /* 0x5a */ SCMD_MODE_SENSE_G1, "mode_sense(10)", \ 466 /* 0x5e */ SCMD_PERSISTENT_RESERVE_IN, "persistent_reserve_in", \ 467 /* 0x5f */ SCMD_PERSISTENT_RESERVE_OUT, "persistent_reserve_out", \ 468 /* 0x80 */ SCMD_WRITE_FILE_MARK_G4, "write_file_mark(16)", \ 469 /* 0x81 */ SCMD_READ_REVERSE_G4, "read_reverse(16)", \ 470 /* 0x83 */ SCMD_EXTENDED_COPY, "extended_copy", \ 471 /* 0x88 */ SCMD_READ_G4, "read(16)", \ 472 /* 0x8a */ SCMD_WRITE_G4, "write(16)", \ 473 /* 0x8c */ SCMD_READ_ATTRIBUTE, "read_attribute", \ 474 /* 0x8d */ SCMD_WRITE_ATTRIBUTE, "write_attribute", \ 475 /* 0x8f */ SCMD_VERIFY_G4, "verify(16)", \ 476 /* 0x91 */ SCMD_SPACE_G4, "space(16)", \ 477 /* 0x92 */ SCMD_LOCATE_G4, "locate(16)", \ 478 /* 0x9e */ SCMD_SVC_ACTION_IN_G4, "service_action_in(16)", \ 479 /* 0x9f */ SCMD_SVC_ACTION_OUT_G4, "service_action_out(16)", \ 480 /* 0xa0 */ SCMD_REPORT_LUNS, "report_luns", \ 481 /* 0xa2 */ SCMD_SECURITY_PROTO_IN, "security_protocol_in", \ 482 /* 0xa3 */ SCMD_MAINTENANCE_IN, "maintenance_in", \ 483 /* 0xa4 */ SCMD_MAINTENANCE_OUT, "maintenance_out", \ 484 /* 0xa8 */ SCMD_READ_G5, "read(12)", \ 485 /* 0xa9 */ SCMD_SVC_ACTION_OUT_G5, "service_action_out(12)", \ 486 /* 0xaa */ SCMD_WRITE_G5, "write(12)", \ 487 /* 0xab */ SCMD_SVC_ACTION_IN_G5, "service_action_in(12)", \ 488 /* 0xac */ SCMD_GET_PERFORMANCE, "get_performance", \ 489 /* 0xAF */ SCMD_VERIFY_G5, "verify(12)", \ 490 /* 0xb5 */ SCMD_SECURITY_PROTO_OUT, "security_protocol_out" \ 491 /* see cdio.h for additional command-to-string translations */ 492 493 /* XXX not a command code, does not belong here */ 494 #define ATAPI_CAPABILITIES 0x2A 495 496 #ifdef __cplusplus 497 } 498 #endif 499 500 /* 501 * Below are inclusions of files describing various command structures 502 * of interest. 503 */ 504 #include <sys/scsi/generic/inquiry.h> 505 #include <sys/scsi/generic/sense.h> 506 507 /* 508 * Private Vendor Unique Commands - Each implementation provides this. 509 */ 510 #include <sys/scsi/impl/commands.h> 511 512 #endif /* _SYS_SCSI_GENERIC_COMMANDS_H */ 513