1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 * 25 * Database-specific definitions for the getXXXbyYYY routines 26 * (e.g getpwuid_r(), ether_ntohost()) that use the name-service switch. 27 * Database-independent definitions are in <nss_common.h> 28 * 29 * Ideally, this is the only switch header file one would add things 30 * to in order to support a new database. 31 * 32 * NOTE: The interfaces documented in this file may change in a minor 33 * release. It is intended that in the future a stronger committment 34 * will be made to these interface definitions which will guarantee 35 * them across minor releases. 36 */ 37 38 #ifndef _NSS_DBDEFS_H 39 #define _NSS_DBDEFS_H 40 41 #include <sys/types.h> 42 #include <unistd.h> 43 #include <errno.h> 44 #include <netdb.h> /* MAXALIASES, MAXADDRS */ 45 #include <limits.h> /* LOGNAME_MAX */ 46 #include <nss_common.h> 47 48 #ifdef __cplusplus 49 extern "C" { 50 #endif 51 52 #ifndef NSS_INCLUDE_UNSAFE 53 #define NSS_INCLUDE_UNSAFE 1 /* Build old, MT-unsafe interfaces, */ 54 #endif /* NSS_INCLUDE_UNSAFE */ /* e.g. getpwnam (c.f. getpwnam_r) */ 55 56 /* 57 * Names of the well-known databases. 58 */ 59 60 #define NSS_DBNAM_ALIASES "aliases" /* E-mail aliases, that is */ 61 #define NSS_DBNAM_AUTOMOUNT "automount" 62 #define NSS_DBNAM_BOOTPARAMS "bootparams" 63 #define NSS_DBNAM_ETHERS "ethers" 64 #define NSS_DBNAM_GROUP "group" 65 #define NSS_DBNAM_HOSTS "hosts" 66 #define NSS_DBNAM_IPNODES "ipnodes" 67 #define NSS_DBNAM_NETGROUP "netgroup" 68 #define NSS_DBNAM_NETMASKS "netmasks" 69 #define NSS_DBNAM_NETWORKS "networks" 70 #define NSS_DBNAM_PASSWD "passwd" 71 #define NSS_DBNAM_PRINTERS "printers" 72 #define NSS_DBNAM_PROJECT "project" 73 #define NSS_DBNAM_PROTOCOLS "protocols" 74 #define NSS_DBNAM_PUBLICKEY "publickey" 75 #define NSS_DBNAM_RPC "rpc" 76 #define NSS_DBNAM_SERVICES "services" 77 #define NSS_DBNAM_AUDITUSER "audit_user" 78 #define NSS_DBNAM_AUTHATTR "auth_attr" 79 #define NSS_DBNAM_EXECATTR "exec_attr" 80 #define NSS_DBNAM_PROFATTR "prof_attr" 81 #define NSS_DBNAM_USERATTR "user_attr" 82 83 #define NSS_DBNAM_TSOL_TP "tnrhtp" 84 #define NSS_DBNAM_TSOL_RH "tnrhdb" 85 #define NSS_DBNAM_TSOL_ZC "tnzonecfg" 86 87 /* getspnam() et al use the "passwd" config entry but the "shadow" backend */ 88 #define NSS_DBNAM_SHADOW "shadow" 89 90 /* The "compat" backend gets config entries for these pseudo-databases */ 91 #define NSS_DBNAM_PASSWD_COMPAT "passwd_compat" 92 #define NSS_DBNAM_GROUP_COMPAT "group_compat" 93 94 /* 95 * Default switch configuration, compiled into the front-ends. 96 * 97 * Absent good reasons to the contrary, this should be compatible with the 98 * default /etc/nsswitch.conf file. 99 */ 100 #define NSS_FILES_ONLY "files" 101 #define NSS_FILES_NS "files nis" 102 #define NSS_NS_FALLBACK "nis [NOTFOUND=return] files" 103 #define NSS_NS_ONLY "nis" 104 #define NSS_TSOL_FALLBACK "files ldap" 105 106 #define NSS_DEFCONF_ALIASES NSS_FILES_NS 107 #define NSS_DEFCONF_AUTOMOUNT NSS_FILES_NS 108 #define NSS_DEFCONF_BOOTPARAMS NSS_NS_FALLBACK 109 #define NSS_DEFCONF_ETHERS NSS_NS_FALLBACK 110 #define NSS_DEFCONF_GROUP NSS_FILES_NS 111 #define NSS_DEFCONF_HOSTS NSS_NS_FALLBACK 112 #define NSS_DEFCONF_IPNODES NSS_NS_FALLBACK 113 #define NSS_DEFCONF_NETGROUP NSS_NS_ONLY 114 #define NSS_DEFCONF_NETMASKS NSS_NS_FALLBACK 115 #define NSS_DEFCONF_NETWORKS NSS_NS_FALLBACK 116 #define NSS_DEFCONF_PASSWD NSS_FILES_NS 117 #define NSS_DEFCONF_PRINTERS "user files nis" 118 #define NSS_DEFCONF_PROJECT NSS_FILES_NS 119 #define NSS_DEFCONF_PROTOCOLS NSS_NS_FALLBACK 120 #define NSS_DEFCONF_PUBLICKEY NSS_FILES_NS 121 #define NSS_DEFCONF_RPC NSS_NS_FALLBACK 122 #define NSS_DEFCONF_SERVICES NSS_FILES_NS /* speeds up byname() */ 123 124 #define NSS_DEFCONF_GROUP_COMPAT NSS_NS_ONLY 125 #define NSS_DEFCONF_PASSWD_COMPAT NSS_NS_ONLY 126 127 #define NSS_DEFCONF_ATTRDB NSS_FILES_NS 128 129 #define NSS_DEFCONF_AUDITUSER NSS_DEFCONF_PASSWD 130 #define NSS_DEFCONF_USERATTR NSS_DEFCONF_PASSWD 131 #define NSS_DEFCONF_AUTHATTR NSS_DEFCONF_ATTRDB 132 #define NSS_DEFCONF_PROFATTR NSS_DEFCONF_ATTRDB 133 #define NSS_DEFCONF_EXECATTR NSS_DEFCONF_PROFATTR 134 135 #define NSS_DEFCONF_TSOL_TP NSS_TSOL_FALLBACK 136 #define NSS_DEFCONF_TSOL_RH NSS_TSOL_FALLBACK 137 #define NSS_DEFCONF_TSOL_ZC NSS_TSOL_FALLBACK 138 139 /* 140 * Line-lengths that the "files" and "compat" backends will try to support. 141 * It may be reasonable (even advisable) to use smaller values than these. 142 */ 143 144 #define NSS_BUFSIZ 1024 145 146 #define NSS_LINELEN_GROUP ((NSS_BUFSIZ) * 8) 147 #define NSS_LINELEN_HOSTS ((NSS_BUFSIZ) * 8) 148 #define NSS_LINELEN_IPNODES ((NSS_BUFSIZ) * 8) 149 #define NSS_LINELEN_NETMASKS NSS_BUFSIZ 150 #define NSS_LINELEN_NETWORKS NSS_BUFSIZ 151 #define NSS_LINELEN_PASSWD NSS_BUFSIZ 152 #define NSS_LINELEN_PRINTERS NSS_BUFSIZ 153 #define NSS_LINELEN_PROJECT ((NSS_BUFSIZ) * 4) 154 #define NSS_LINELEN_PROTOCOLS NSS_BUFSIZ 155 #define NSS_LINELEN_PUBLICKEY NSS_BUFSIZ 156 #define NSS_LINELEN_RPC NSS_BUFSIZ 157 #define NSS_LINELEN_SERVICES NSS_BUFSIZ 158 #define NSS_LINELEN_SHADOW NSS_BUFSIZ 159 #define NSS_LINELEN_ETHERS NSS_BUFSIZ 160 #define NSS_LINELEN_BOOTPARAMS NSS_BUFSIZ 161 162 #define NSS_LINELEN_ATTRDB NSS_BUFSIZ 163 164 #define NSS_LINELEN_AUDITUSER NSS_LINELEN_ATTRDB 165 #define NSS_LINELEN_AUTHATTR NSS_LINELEN_ATTRDB 166 #define NSS_LINELEN_EXECATTR NSS_LINELEN_ATTRDB 167 #define NSS_LINELEN_PROFATTR NSS_LINELEN_ATTRDB 168 #define NSS_LINELEN_USERATTR NSS_LINELEN_ATTRDB 169 170 #define NSS_MMAPLEN_EXECATTR NSS_LINELEN_EXECATTR * 8 171 172 #define NSS_LINELEN_TSOL NSS_BUFSIZ 173 174 #define NSS_LINELEN_TSOL_TP NSS_LINELEN_TSOL 175 #define NSS_LINELEN_TSOL_RH NSS_LINELEN_TSOL 176 #define NSS_LINELEN_TSOL_ZC NSS_LINELEN_TSOL 177 178 /* 179 * Reasonable defaults for 'buflen' values passed to _r functions. The BSD 180 * and SunOS 4.x implementations of the getXXXbyYYY() functions used hard- 181 * coded array sizes; the values here are meant to handle anything that 182 * those implementations handled. 183 * === These might more reasonably go in <pwd.h>, <netdb.h> et al 184 */ 185 186 #define NSS_BUFLEN_GROUP NSS_LINELEN_GROUP 187 #define NSS_BUFLEN_HOSTS \ 188 (NSS_LINELEN_HOSTS + (MAXALIASES + MAXADDRS + 2) * sizeof (char *)) 189 #define NSS_BUFLEN_IPNODES \ 190 (NSS_LINELEN_IPNODES + (MAXALIASES + MAXADDRS + 2) * sizeof (char *)) 191 #define NSS_BUFLEN_NETGROUP (MAXHOSTNAMELEN * 2 + LOGNAME_MAX + 3) 192 #define NSS_BUFLEN_NETWORKS NSS_LINELEN_NETWORKS /* === ? + 35 * 4 */ 193 #define NSS_BUFLEN_PASSWD NSS_LINELEN_PASSWD 194 #define NSS_BUFLEN_PROJECT (NSS_LINELEN_PROJECT + 800 * sizeof (char *)) 195 #define NSS_BUFLEN_PROTOCOLS NSS_LINELEN_PROTOCOLS /* === ? + 35 * 4 */ 196 #define NSS_BUFLEN_PUBLICKEY NSS_LINELEN_PUBLICKEY 197 #define NSS_BUFLEN_RPC NSS_LINELEN_RPC /* === ? + 35 * 4 */ 198 #define NSS_BUFLEN_SERVICES NSS_LINELEN_SERVICES /* === ? + 35 * 4 */ 199 #define NSS_BUFLEN_SHADOW NSS_LINELEN_SHADOW 200 #define NSS_BUFLEN_ETHERS NSS_LINELEN_ETHERS 201 #define NSS_BUFLEN_BOOTPARAMS NSS_LINELEN_BOOTPARAMS 202 203 #define NSS_BUFLEN_ATTRDB NSS_LINELEN_ATTRDB 204 205 #define NSS_BUFLEN_AUDITUSER NSS_BUFLEN_ATTRDB 206 #define NSS_BUFLEN_AUTHATTR NSS_BUFLEN_ATTRDB 207 #define NSS_BUFLEN_EXECATTR NSS_BUFLEN_ATTRDB 208 #define NSS_BUFLEN_PROFATTR NSS_BUFLEN_ATTRDB 209 #define NSS_BUFLEN_USERATTR ((NSS_BUFLEN_ATTRDB) * 8) 210 211 #define NSS_BUFLEN_TSOL NSS_LINELEN_TSOL 212 #define NSS_BUFLEN_TSOL_TP NSS_BUFLEN_TSOL 213 #define NSS_BUFLEN_TSOL_RH NSS_BUFLEN_TSOL 214 #define NSS_BUFLEN_TSOL_ZC NSS_BUFLEN_TSOL 215 216 /* 217 * Default cache door buffer size (2x largest buffer) 218 */ 219 220 #define NSS_BUFLEN_DOOR ((NSS_BUFSIZ) * 16) 221 222 /* 223 * Arguments and results, passed between the frontends and backends for 224 * the well-known databases. The getXbyY_r() and getXent_r() routines 225 * use a common format that is further described below; other routines 226 * use their own formats. 227 */ 228 229 /* 230 * The nss_str2ent_t routine is the data marshaller for the nsswitch. 231 * it converts 'native files' format into 'entry' format as part of the 232 * return processing for a getXbyY interface. 233 * 234 * The nss_groupstr_t routine does the real work for any backend 235 * that can supply a netgroup entry as a string in /etc/group format 236 */ 237 #if defined(__STDC__) 238 typedef int (*nss_str2ent_t)(const char *in, int inlen, 239 void *ent, char *buf, int buflen); 240 241 struct nss_groupsbymem; /* forward definition */ 242 typedef nss_status_t (*nss_groupstr_t)(const char *instr, int inlen, 243 struct nss_groupsbymem *); 244 #else 245 typedef int (*nss_str2ent_t)(); 246 typedef nss_status_t (*nss_groupstr_t)(); 247 #endif 248 249 /* 250 * The initgroups() function [see initgroups(3c)] needs to find all the 251 * groups to which a given user belongs. To do this it calls 252 * _getgroupsbymember(), which is part of the frontend for the "group" 253 * database. 254 * We want the same effect as if we used getgrent_r() to enumerate the 255 * entire groups database (possibly from multiple sources), but getgrent_r() 256 * is too inefficient. Most backends can do better if they know they're 257 * meant to scan all groups; hence there's a separate backend operation, 258 * NSS_DBOP_GROUP_BYMEMBER, which uses the nss_groupsbymem struct. 259 * Note that the normal return-value from such a backend, even when it 260 * successfully finds matching group entries, is NSS_NOTFOUND, because 261 * this tells the switch engine to keep searching in any more sources. 262 * In fact, the backends only return NSS_SUCCESS if they find enough 263 * matching entries that the gid_array is completely filled, in which 264 * case the switch engine should stop searching. 265 * If the force_slow_way field is set, the backend should eschew any cached 266 * information (e.g. the YP netid.byname map or the NIS+ cred.org_dir table) 267 * and should instead grind its way through the group map/table/whatever. 268 */ 269 270 struct nss_groupsbymem { /* For _getgroupsbymember() */ 271 /* in: */ 272 const char *username; 273 gid_t *gid_array; 274 int maxgids; 275 int force_slow_way; 276 nss_str2ent_t str2ent; 277 nss_groupstr_t process_cstr; 278 279 /* in_out: */ 280 int numgids; 281 }; 282 283 /* 284 * The netgroup routines are handled as follows: 285 * 286 * Policy decision: 287 * If netgroup A refers to netgroup B, both must occur in the same 288 * source (other choices give very confusing semantics). This 289 * assumption is deeply embedded in the frontend and backends. 290 * 291 * - setnetgrent(), despite its name, is really a getXXXbyYYY operation: 292 * it takes a name and finds a netgroup with that name (see the 293 * nss_setnetgrent_args struct below). The "result" that it returns 294 * to the frontend is an nss_backend_t for a pseudo-backend that allows 295 * one to enumerate the members of that netgroup. 296 * 297 * - getnetgrent() calls the 'getXXXent' function in the pseudo-backend; 298 * it doesn't go through the switch engine at all. It uses the 299 * nss_getnetgrent_args struct below. 300 * 301 * - innetgr() is implemented on top of __multi_innetgr(), which replaces 302 * each (char *) argument of innetgr() with a counted vector of (char *). 303 * The semantics are the same as an OR of the results of innetgr() 304 * operations on each possible 4-tuple picked from the arguments, but 305 * it's possible to implement some cases more efficiently. This is 306 * important for mountd, which used to read YP netgroup.byhost directly 307 * in order to determine efficiently whether a given host belonged to any 308 * one of a long list of netgroups. Wildcarded arguments are indicated 309 * by a count of zero. 310 * 311 * - __multi_innetgr() uses the nss_innetgr_args struct. A backend whose 312 * source contains at least one of the groups listed in the 'groups' 313 * vector will return NSS_SUCCESS and will set the 'status' field to 314 * indicate whether any 4-tuple was satisfied. A backend will only 315 * return NSS_NOTFOUND if the source contained none of the groups 316 * listed in the 'groups' vector. 317 */ 318 319 enum nss_netgr_argn { /* We need (machine, user, domain) triples */ 320 NSS_NETGR_MACHINE = 0, 321 NSS_NETGR_USER = 1, 322 NSS_NETGR_DOMAIN = 2, 323 NSS_NETGR_N = 3 324 }; 325 326 enum nss_netgr_status { /* Status from setnetgrent, multi_innetgr */ 327 NSS_NETGR_FOUND = 0, 328 NSS_NETGR_NO = 1, 329 NSS_NETGR_NOMEM = 2 330 }; 331 332 struct nss_setnetgrent_args { 333 /* in: */ 334 const char *netgroup; 335 /* out: */ 336 nss_backend_t *iterator; /* <==== Explain */ 337 }; 338 339 struct nss_getnetgrent_args { 340 /* in: */ 341 char *buffer; 342 int buflen; 343 /* out: */ 344 enum nss_netgr_status status; 345 char *retp[NSS_NETGR_N]; 346 }; 347 348 typedef unsigned nss_innetgr_argc; /* 0 means wildcard */ 349 typedef char ** nss_innetgr_argv; /* === Do we really need these? */ 350 351 struct nss_innetgr_1arg { 352 nss_innetgr_argc argc; 353 nss_innetgr_argv argv; 354 }; 355 356 struct nss_innetgr_args { 357 /* in: */ 358 struct nss_innetgr_1arg arg[NSS_NETGR_N]; 359 struct nss_innetgr_1arg groups; 360 /* out: */ 361 enum nss_netgr_status status; 362 }; 363 364 /* 365 * nss_XbyY_buf_t -- structure containing the generic arguments passwd to 366 * getXXXbyYYY_r() and getXXXent_r() routines. The (void *) value points to 367 * a struct of the appropriate type, e.g. struct passwd or struct hostent. 368 * 369 * The functions that allocate and free these structures do no locking at 370 * all, since the routines that use them are inherently MT-unsafe anyway. 371 */ 372 373 typedef struct { 374 void *result; /* "result" parameter to getXbyY_r() */ 375 char *buffer; /* "buffer" " " */ 376 int buflen; /* "buflen" " " */ 377 } nss_XbyY_buf_t; 378 379 #if defined(__STDC__) 380 extern nss_XbyY_buf_t *_nss_XbyY_buf_alloc(int struct_size, int buffer_size); 381 extern void _nss_XbyY_buf_free(nss_XbyY_buf_t *); 382 #else 383 extern nss_XbyY_buf_t *_nss_XbyY_buf_alloc(); 384 extern void _nss_XbyY_buf_free(); 385 #endif 386 387 #define NSS_XbyY_ALLOC(bufpp, str_size, buf_size) (\ 388 (*bufpp) == 0 \ 389 ? (*bufpp) = _nss_XbyY_buf_alloc(str_size, buf_size) \ 390 : (*bufpp)) 391 392 #define NSS_XbyY_FREE(bufpp) (_nss_XbyY_buf_free(*bufpp), (*bufpp) = 0) 393 394 /* 395 * The nss_XbyY_args_t struct contains all the information passed between 396 * frontends and backends for the getXbyY_r() and getXent() routines, 397 * including an nss_XbyY_buf_t and the lookup key (unused for getXXXent_r). 398 * 399 * The (*str2ent)() member converts a single XXXent from ASCII text to the 400 * appropriate struct, storing any pointer data (strings, in_addrs, arrays 401 * of these) in the buffer. The ASCII text is a counted string (*not* a 402 * zero-terminated string) whose length is specified by the instr_len 403 * parameter. The text is found at the address specified by instr and 404 * the string is treated as readonly. buffer and instr must be non- 405 * intersecting memory areas. 406 * 407 * With the exception of passwd, shadow and group, the text form for these 408 * databases allows trailing comments and arbitrary whitespace. The 409 * corresponding str2ent routine assumes that comments, leading whitespace 410 * and trailing whitespace have been stripped (and thus assumes that entries 411 * consisting only of these have been discarded). 412 * 413 * The text entries for "rpc" and for the databases described in <netdb.h> 414 * follow a common format (a canonical name with a possibly empty list 415 * of aliases, and some other value), albeit with minor variations. 416 * The function _nss_netdb_aliases() does most of the generic work involved 417 * in parsing and marshalling these into the buffer. 418 */ 419 420 typedef union nss_XbyY_key { /* No tag; backend should know what to expect */ 421 uid_t uid; 422 gid_t gid; 423 projid_t projid; 424 const char *name; 425 int number; 426 struct { 427 int net; 428 int type; 429 } netaddr; 430 struct { 431 const char *addr; 432 int len; 433 int type; 434 } hostaddr; 435 struct { 436 union { 437 const char *name; 438 int port; 439 } serv; 440 const char *proto; 441 } serv; 442 void *ether; 443 struct { 444 const char *name; 445 const char *keytype; 446 } pkey; 447 struct { 448 const char *name; 449 int af_family; 450 int flags; 451 } ipnode; 452 void *attrp; /* for the new attr databases */ 453 } nss_XbyY_key_t; 454 455 456 #if defined(__STDC__) 457 typedef int (*nss_key2str_t)(void *buffer, size_t buflen, 458 nss_XbyY_key_t *key, size_t *len); 459 #else 460 typedef int (*nss_key2str_t)(); 461 #endif 462 463 464 typedef struct nss_XbyY_args { 465 466 /* IN */ 467 nss_XbyY_buf_t buf; 468 int stayopen; 469 /* 470 * Support for setXXXent(stayopen) 471 * Used only in hosts, protocols, 472 * networks, rpc, and services. 473 */ 474 nss_str2ent_t str2ent; 475 union nss_XbyY_key key; 476 477 /* OUT */ 478 void *returnval; 479 int erange; 480 int h_errno; /* For gethost*_r() */ 481 nss_status_t status; /* from the backend last called */ 482 /* NSS2 */ 483 nss_key2str_t key2str; /* IN */ 484 size_t returnlen; /* OUT */ 485 486 /* NSCD/DOOR data */ 487 488 /* ... buffer arena follows... */ 489 } nss_XbyY_args_t; 490 491 492 493 /* 494 * nss/nscd v2 interface, packed buffer format 495 * 496 * A key component of the v2 name service switch is the redirection 497 * of all activity to nscd for actual processing. In the original 498 * switch most activity took place in each application, and the nscd 499 * cache component was an add-on optional interface. 500 * 501 * The nscd v1 format was a completely private interface that 502 * implemented specific bufferiing formats on a per getXbyY API basis. 503 * 504 * The nss/nscd v2 interface uses a common header and commonalizes 505 * the buffering format as consistently as possible. The general rule 506 * of thumb is that backends are required to assemble their results in 507 * "files based" format [IE the format used on a per result basis as 508 * returned by the files backend] and then call the standard str2ent 509 * interface. This is the original intended design as used in the files 510 * and nis backends. 511 * 512 * The benefit of this is that the application side library can assemble 513 * a request and provide a header and a variable length result buffer via 514 * a doors API, and then the nscd side switch can assemble a a getXbyY 515 * request providing the result buffer and a str2ent function that copies 516 * but does not unpack the result. 517 * 518 * This results is returned back via the door, and unpacked using the 519 * native library side str2ent interface. 520 * 521 * Additionally, the common header allows extensibility to add new 522 * getXbyYs, putXbyYs or other maintenance APIs to/from nscd without 523 * changing the existing "old style" backend interfaces. 524 * 525 * Finally new style getXbyY, putXbyY and backend interfaces can be 526 * by adding new operation requests to the header, while old style 527 * backwards compatability. 528 */ 529 530 /* 531 * nss/nscd v2 callnumber definitions 532 */ 533 534 /* 535 * callnumbers are separated by categories, such as: 536 * application to nscd requests, nscd to nscd requests, 537 * smf to nscd requests, etc. 538 */ 539 540 #define NSCDV2CATMASK (0xFF000000) 541 #define NSCDV2CALLMASK (0x00FFFFFF) 542 543 /* 544 * nss/nscd v2 categories 545 */ 546 547 #define NSCD_CALLCAT_APP ('a'<<24) 548 #define NSCD_CALLCAT_N2N ('n'<<24) 549 550 /* nscd v2 app-> nscd callnumbers */ 551 552 #define NSCD_SEARCH (NSCD_CALLCAT_APP|0x01) 553 #define NSCD_SETENT (NSCD_CALLCAT_APP|0x02) 554 #define NSCD_GETENT (NSCD_CALLCAT_APP|0x03) 555 #define NSCD_ENDENT (NSCD_CALLCAT_APP|0x04) 556 #define NSCD_PUT (NSCD_CALLCAT_APP|0x05) 557 #define NSCD_GETHINTS (NSCD_CALLCAT_APP|0x06) 558 559 /* nscd v2 SETENT cookie markers */ 560 561 #define NSCD_NEW_COOKIE 0 562 #define NSCD_LOCAL_COOKIE 1 563 564 /* nscd v2 header revision */ 565 /* treated as 0xMMMMmmmm MMMM - Major Rev, mmmm - Minor Rev */ 566 567 #define NSCD_HEADER_REV 0x00020000 568 569 /* 570 * ptr/uint data type used to calculate shared nscd buffer struct sizes 571 * sizes/offsets are arbitrarily limited to 32 bits for 32/64 compatibility 572 * datatype is 64 bits for possible pointer storage and future use 573 */ 574 575 typedef uint64_t nssuint_t; 576 577 /* 578 * nscd v2 buffer layout overview 579 * 580 * The key interface to nscd moving forward is the doors interface 581 * between applications and nscd (NSCD_CALLCAT_APP), and nscd and 582 * it's children (NSCD_CALLCAT_N2N). 583 * 584 * Regardless of the interface used, the buffer layout is consistent. 585 * The General Layout is: 586 * [nss_pheader_t][IN key][OUT data results]{extend results} 587 * 588 * The header (nss_pheader_t) remains constant. 589 * Keys and key layouts vary between call numbers/requests 590 * NSCD_CALLCAT_APP use key layouts mimics/defines in nss_dbdefs.h 591 * NSCD_CALLCAT_NSN use layouts defined by nscd headers 592 * Data and data results vary between results 593 * NSCD_CALLCAT_APP return "file standard format" output buffers 594 * NSCD_CALLCAT_NSN return data defined by nscd headers 595 * extended results are optional and vary 596 * 597 */ 598 599 /* 600 * nss_pheader_t -- buffer header structure that contains switch data 601 * "packed" by the client into a buffer suitable for transport over 602 * nscd's door, and that can be unpacked into a native form within 603 * nscd's switch. Capable of packing and unpacking data ans results. 604 * 605 * NSCD_HEADER_REV: 0x00020000 16 x uint64 = (128 byte header) 606 */ 607 608 typedef struct { 609 uint32_t nsc_callnumber; /* packed buffer request */ 610 uint32_t nss_dbop; /* old nss dbop */ 611 uint32_t p_ruid; /* real uid */ 612 uint32_t p_euid; /* effective uid */ 613 uint32_t p_version; /* 0xMMMMmmmm Major/minor */ 614 uint32_t p_status; /* nss_status_t */ 615 uint32_t p_errno; /* errno */ 616 uint32_t p_herrno; /* h_errno */ 617 nssuint_t libpriv; /* reserved (for lib/client) */ 618 nssuint_t pbufsiz; /* buffer size */ 619 nssuint_t dbd_off; /* IN: db desc off */ 620 nssuint_t dbd_len; /* IN: db desc len */ 621 nssuint_t key_off; /* IN: key off */ 622 nssuint_t key_len; /* IN: key len */ 623 nssuint_t data_off; /* OUT: data off */ 624 nssuint_t data_len; /* OUT: data len */ 625 nssuint_t ext_off; /* OUT: extended results off */ 626 nssuint_t ext_len; /* OUT: extended results len */ 627 nssuint_t nscdpriv; /* reserved (for nscd) */ 628 nssuint_t reserved1; /* reserved (TBD) */ 629 } nss_pheader_t; 630 631 /* 632 * nss_pnetgr_t -- packed offset structure for holding keys used 633 * by innetgr (__multi_innetgr) key 634 * Key format is: 635 * nss_pnetgr_t 636 * (nssuint_t)[machine_argc] offsets to strings 637 * (nssuint_t)[user_argc] offsets to strings 638 * (nssuint_t)[domain_argc] offsets to strings 639 * (nssuint_t)[groups_argc] offsets to strings 640 * machine,user,domain,groups strings 641 */ 642 643 typedef struct { 644 uint32_t machine_argc; 645 uint32_t user_argc; 646 uint32_t domain_argc; 647 uint32_t groups_argc; 648 nssuint_t machine_offv; 649 nssuint_t user_offv; 650 nssuint_t domain_offv; 651 nssuint_t groups_offv; 652 } nss_pnetgr_t; 653 654 655 /* status returned by the str2ent parsing routines */ 656 #define NSS_STR_PARSE_SUCCESS 0 657 #define NSS_STR_PARSE_PARSE 1 658 #define NSS_STR_PARSE_ERANGE 2 659 660 #define NSS_XbyY_INIT(str, res, bufp, len, func) (\ 661 (str)->buf.result = (res), \ 662 (str)->buf.buffer = (bufp), \ 663 (str)->buf.buflen = (len), \ 664 (str)->stayopen = 0, \ 665 (str)->str2ent = (func), \ 666 (str)->key2str = NULL, \ 667 (str)->returnval = 0, \ 668 (str)->returnlen = 0, \ 669 (str)->erange = 0) 670 671 #define NSS_XbyY_INIT_EXT(str, res, bufp, len, func, kfunc) (\ 672 (str)->buf.result = (res), \ 673 (str)->buf.buffer = (bufp), \ 674 (str)->buf.buflen = (len), \ 675 (str)->stayopen = 0, \ 676 (str)->str2ent = (func), \ 677 (str)->key2str = (kfunc), \ 678 (str)->returnval = 0, \ 679 (str)->returnlen = 0, \ 680 (str)->erange = 0) 681 682 #define NSS_XbyY_FINI(str) (\ 683 (str)->returnval == 0 && (str)->erange && (errno = ERANGE), \ 684 (str)->returnval) 685 686 #define NSS_PACKED_CRED_CHECK(buf, ruid, euid) (\ 687 ((nss_pheader_t *)(buf))->p_ruid == (ruid) && \ 688 ((nss_pheader_t *)(buf))->p_euid == (euid)) 689 690 #if defined(__STDC__) 691 extern char **_nss_netdb_aliases(const char *, int, char *, int); 692 extern nss_status_t nss_default_key2str(void *, size_t, nss_XbyY_args_t *, 693 const char *, int, size_t *); 694 extern nss_status_t nss_packed_arg_init(void *, size_t, nss_db_root_t *, 695 nss_db_initf_t *, int *, 696 nss_XbyY_args_t *); 697 extern nss_status_t nss_packed_context_init(void *, size_t, nss_db_root_t *, 698 nss_db_initf_t *, nss_getent_t **, 699 nss_XbyY_args_t *); 700 extern void nss_packed_set_status(void *, size_t, nss_status_t, 701 nss_XbyY_args_t *); 702 extern nss_status_t nss_packed_getkey(void *, size_t, char **, int *, 703 nss_XbyY_args_t *); 704 #else 705 extern char **_nss_netdb_aliases(); 706 extern int nss_default_key2str(); 707 extern nss_status_t nss_packed_arg_init(); 708 extern nss_status_t nss_packed_context_init(); 709 extern void nss_packed_set_status(); 710 extern nss_status_t nss_packed_getkey(); 711 #endif 712 713 /* 714 * nss_dbop_t values for searches with various keys; values for 715 * destructor/endent/setent/getent are defined in <nss_common.h> 716 */ 717 718 /* 719 * These are part of the "Over the wire" IE app->nscd getXbyY 720 * op for well known getXbyY's. Cannot use NSS_DBOP_X_Y directly 721 * because NSS_DBOP_next_iter is NOT an incrementing counter value 722 * it's a starting offset into an array value. 723 */ 724 725 #define NSS_DBOP_X(x) ((x)<<16) 726 #define NSS_DBOP_XY(x, y) ((x)|(y)) 727 728 #define NSS_DBOP_ALIASES NSS_DBOP_X(1) 729 #define NSS_DBOP_AUTOMOUNT NSS_DBOP_X(2) 730 #define NSS_DBOP_BOOTPARAMS NSS_DBOP_X(3) 731 #define NSS_DBOP_ETHERS NSS_DBOP_X(4) 732 #define NSS_DBOP_GROUP NSS_DBOP_X(5) 733 #define NSS_DBOP_HOSTS NSS_DBOP_X(6) 734 #define NSS_DBOP_IPNODES NSS_DBOP_X(7) 735 #define NSS_DBOP_NETGROUP NSS_DBOP_X(8) 736 #define NSS_DBOP_NETMASKS NSS_DBOP_X(9) 737 #define NSS_DBOP_NETWORKS NSS_DBOP_X(10) 738 #define NSS_DBOP_PASSWD NSS_DBOP_X(11) 739 #define NSS_DBOP_PRINTERS NSS_DBOP_X(12) 740 #define NSS_DBOP_PROJECT NSS_DBOP_X(13) 741 #define NSS_DBOP_PROTOCOLS NSS_DBOP_X(14) 742 #define NSS_DBOP_PUBLICKEY NSS_DBOP_X(15) 743 #define NSS_DBOP_RPC NSS_DBOP_X(16) 744 #define NSS_DBOP_SERVICES NSS_DBOP_X(17) 745 #define NSS_DBOP_AUDITUSER NSS_DBOP_X(18) 746 #define NSS_DBOP_AUTHATTR NSS_DBOP_X(19) 747 #define NSS_DBOP_EXECATTR NSS_DBOP_X(20) 748 #define NSS_DBOP_PROFATTR NSS_DBOP_X(21) 749 #define NSS_DBOP_USERATTR NSS_DBOP_X(22) 750 751 #define NSS_DBOP_GROUP_BYNAME (NSS_DBOP_next_iter) 752 #define NSS_DBOP_GROUP_BYGID (NSS_DBOP_GROUP_BYNAME + 1) 753 #define NSS_DBOP_GROUP_BYMEMBER (NSS_DBOP_GROUP_BYGID + 1) 754 755 #define NSS_DBOP_PASSWD_BYNAME (NSS_DBOP_next_iter) 756 #define NSS_DBOP_PASSWD_BYUID (NSS_DBOP_PASSWD_BYNAME + 1) 757 758 /* The "compat" backend requires that PASSWD_BYNAME == SHADOW_BYNAME */ 759 /* (it also requires that both use key.name to pass the username). */ 760 #define NSS_DBOP_SHADOW_BYNAME (NSS_DBOP_PASSWD_BYNAME) 761 762 #define NSS_DBOP_PROJECT_BYNAME (NSS_DBOP_next_iter) 763 #define NSS_DBOP_PROJECT_BYID (NSS_DBOP_PROJECT_BYNAME + 1) 764 765 #define NSS_DBOP_HOSTS_BYNAME (NSS_DBOP_next_iter) 766 #define NSS_DBOP_HOSTS_BYADDR (NSS_DBOP_HOSTS_BYNAME + 1) 767 768 #define NSS_DBOP_IPNODES_BYNAME (NSS_DBOP_next_iter) 769 #define NSS_DBOP_IPNODES_BYADDR (NSS_DBOP_IPNODES_BYNAME + 1) 770 771 /* 772 * NSS_DBOP_NAME_2ADDR 773 * NSS_DBOP_ADDR_2NAME 774 * : are defines for ipv6 api's 775 */ 776 777 #define NSS_DBOP_NAME_2ADDR (NSS_DBOP_next_ipv6_iter) 778 #define NSS_DBOP_ADDR_2NAME (NSS_DBOP_NAME_2ADDR + 1) 779 780 #define NSS_DBOP_RPC_BYNAME (NSS_DBOP_next_iter) 781 #define NSS_DBOP_RPC_BYNUMBER (NSS_DBOP_RPC_BYNAME + 1) 782 783 #define NSS_DBOP_NETWORKS_BYNAME (NSS_DBOP_next_iter) 784 #define NSS_DBOP_NETWORKS_BYADDR (NSS_DBOP_NETWORKS_BYNAME + 1) 785 786 #define NSS_DBOP_SERVICES_BYNAME (NSS_DBOP_next_iter) 787 #define NSS_DBOP_SERVICES_BYPORT (NSS_DBOP_SERVICES_BYNAME + 1) 788 789 #define NSS_DBOP_PROTOCOLS_BYNAME (NSS_DBOP_next_iter) 790 #define NSS_DBOP_PROTOCOLS_BYNUMBER (NSS_DBOP_PROTOCOLS_BYNAME + 1) 791 792 #define NSS_DBOP_ETHERS_HOSTTON (NSS_DBOP_next_noiter) 793 #define NSS_DBOP_ETHERS_NTOHOST (NSS_DBOP_ETHERS_HOSTTON + 1) 794 795 #define NSS_DBOP_BOOTPARAMS_BYNAME (NSS_DBOP_next_noiter) 796 #define NSS_DBOP_NETMASKS_BYNET (NSS_DBOP_next_noiter) 797 798 #define NSS_DBOP_PRINTERS_BYNAME (NSS_DBOP_next_iter) 799 800 /* 801 * The "real" backend for netgroup (__multi_innetgr, setnetgrent) 802 */ 803 #define NSS_DBOP_NETGROUP_IN (NSS_DBOP_next_iter) 804 #define NSS_DBOP_NETGROUP_SET (NSS_DBOP_NETGROUP_IN + 1) 805 806 /* 807 * The backend for getpublickey and getsecretkey (getkeys) 808 */ 809 #define NSS_DBOP_KEYS_BYNAME (NSS_DBOP_next_iter) 810 811 /* 812 * The pseudo-backend for netgroup (returned by setnetgrent) doesn't have 813 * any getXXXbyYYY operations, just the usual destr/end/set/get ops, 814 * so needs no definitions here. 815 */ 816 817 #define NSS_DBOP_ATTRDB_BYNAME (NSS_DBOP_next_iter) 818 819 #define NSS_DBOP_AUDITUSER_BYNAME NSS_DBOP_ATTRDB_BYNAME 820 #define NSS_DBOP_AUTHATTR_BYNAME NSS_DBOP_ATTRDB_BYNAME 821 #define NSS_DBOP_EXECATTR_BYNAME NSS_DBOP_ATTRDB_BYNAME 822 #define NSS_DBOP_EXECATTR_BYID (NSS_DBOP_EXECATTR_BYNAME + 1) 823 #define NSS_DBOP_EXECATTR_BYNAMEID (NSS_DBOP_EXECATTR_BYID + 1) 824 #define NSS_DBOP_PROFATTR_BYNAME NSS_DBOP_ATTRDB_BYNAME 825 #define NSS_DBOP_USERATTR_BYNAME NSS_DBOP_ATTRDB_BYNAME 826 827 #define NSS_DBOP_TSOL_TP_BYNAME (NSS_DBOP_next_iter) 828 #define NSS_DBOP_TSOL_RH_BYADDR (NSS_DBOP_next_iter) 829 #define NSS_DBOP_TSOL_ZC_BYNAME (NSS_DBOP_next_iter) 830 831 /* 832 * Used all over in the switch code. The best home for it I can think of. 833 * Power-of-two alignments only. 834 */ 835 #define ROUND_DOWN(n, align) (((uintptr_t)n) & ~((align) - 1l)) 836 #define ROUND_UP(n, align) ROUND_DOWN(((uintptr_t)n) + (align) - 1l, \ 837 (align)) 838 839 #ifdef __cplusplus 840 } 841 #endif 842 843 #endif /* _NSS_DBDEFS_H */ 844