1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 * 22 * Copyright 1987 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #pragma ident "%Z%%M% %I% %E% SMI" 27 28 /* 29 * Remote execution (rex) protocol specification 30 */ 31 32 const STRINGSIZE = 1024; 33 typedef string rexstring<1024>; 34 35 /* 36 * values to pass to REXPROC_SIGNAL 37 */ 38 const SIGINT = 2; /* interrupt */ 39 40 /* 41 * Values for rst_flags, below 42 */ 43 const REX_INTERACTIVE = 1; /* interactive mode */ 44 45 struct rex_start { 46 rexstring rst_cmd<>; /* list of command and args */ 47 rexstring rst_host; /* working directory host name */ 48 rexstring rst_fsname; /* working directory file system name */ 49 rexstring rst_dirwithin;/* working directory within file system */ 50 rexstring rst_env<>; /* list of environment */ 51 unsigned int rst_port0; /* port for stdin */ 52 unsigned int rst_port1; /* port for stdout */ 53 unsigned int rst_port2; /* port for stderr */ 54 unsigned int rst_flags; /* options - see const above */ 55 }; 56 57 struct rex_result { 58 int rlt_stat; /* integer status code */ 59 rexstring rlt_message; /* string message for human consumption */ 60 }; 61 62 63 struct sgttyb { 64 unsigned four; /* always equals 4 */ 65 opaque chars[4]; 66 /* chars[0] == input speed */ 67 /* chars[1] == output speed */ 68 /* chars[2] == kill character */ 69 /* chars[3] == erase character */ 70 unsigned flags; 71 }; 72 /* values for speeds above (baud rates) */ 73 const B0 = 0; 74 const B50 = 1; 75 const B75 = 2; 76 const B110 = 3; 77 const B134 = 4; 78 const B150 = 5; 79 const B200 = 6; 80 const B300 = 7; 81 const B600 = 8; 82 const B1200 = 9; 83 const B1800 = 10; 84 const B2400 = 11; 85 const B4800 = 12; 86 const B9600 = 13; 87 const B19200 = 14; 88 const B38400 = 15; 89 90 /* values for flags above */ 91 const TANDEM = 0x00000001; /* send stopc on out q full */ 92 const CBREAK = 0x00000002; /* half-cooked mode */ 93 const LCASE = 0x00000004; /* simulate lower case */ 94 const ECHO = 0x00000008; /* echo input */ 95 const CRMOD = 0x00000010; /* map \r to \r\n on output */ 96 const RAW = 0x00000020; /* no i/o processing */ 97 const ODDP = 0x00000040; /* get/send odd parity */ 98 const EVENP = 0x00000080; /* get/send even parity */ 99 const ANYP = 0x000000c0; /* get any parity/send none */ 100 const NLDELAY = 0x00000300; /* \n delay */ 101 const NL0 = 0x00000000; 102 const NL1 = 0x00000100; /* tty 37 */ 103 const NL2 = 0x00000200; /* vt05 */ 104 const NL3 = 0x00000300; 105 const TBDELAY = 0x00000c00; /* horizontal tab delay */ 106 const TAB0 = 0x00000000; 107 const TAB1 = 0x00000400; /* tty 37 */ 108 const TAB2 = 0x00000800; 109 const XTABS = 0x00000c00; /* expand tabs on output */ 110 const CRDELAY = 0x00003000; /* \r delay */ 111 const CR0 = 0x00000000; 112 const CR1 = 0x00001000; /* tn 300 */ 113 const CR2 = 0x00002000; /* tty 37 */ 114 const CR3 = 0x00003000; /* concept 100 */ 115 const VTDELAY = 0x00004000; /* vertical tab delay */ 116 const FF0 = 0x00000000; 117 const FF1 = 0x00004000; /* tty 37 */ 118 const BSDELAY = 0x00008000; /* \b delay */ 119 const BS0 = 0x00000000; 120 const BS1 = 0x00008000; 121 const CRTBS = 0x00010000; /* do backspacing for crt */ 122 const PRTERA = 0x00020000; /* \ ... / erase */ 123 const CRTERA = 0x00040000; /* " \b " to wipe out char */ 124 const TILDE = 0x00080000; /* hazeltine tilde kludge */ 125 const MDMBUF = 0x00100000; /* start/stop output on carrier intr */ 126 const LITOUT = 0x00200000; /* literal output */ 127 const TOSTOP = 0x00400000; /* SIGTTOU on background output */ 128 const FLUSHO = 0x00800000; /* flush output to terminal */ 129 const NOHANG = 0x01000000; /* no SIGHUP on carrier drop */ 130 const L001000 = 0x02000000; 131 const CRTKIL = 0x04000000; /* kill line with " \b " */ 132 const PASS8 = 0x08000000; 133 const CTLECH = 0x10000000; /* echo control chars as ^X */ 134 const PENDIN = 0x20000000; /* tp->t_rawq needs reread */ 135 const DECCTQ = 0x40000000; /* only ^Q starts after ^S */ 136 const NOFLSH = 0x80000000; /* no output flush on signal */ 137 138 struct tchars { 139 unsigned six; /* always equals 6 */ 140 opaque chars[6]; 141 /* chars[0] == interrupt char */ 142 /* chars[1] == quit char */ 143 /* chars[2] == start output char */ 144 /* chars[3] == stop output char */ 145 /* chars[4] == end-of-file char */ 146 /* chars[5] == input delimeter (like nl) */ 147 }; 148 149 struct ltchars { 150 unsigned six; /* always equals 6 */ 151 opaque chars[6]; 152 /* chars[0] == stop process signal */ 153 /* chars[1] == delayed stop process signal */ 154 /* chars[2] == reprint line */ 155 /* chars[3] == flush output */ 156 /* chars[4] == word erase */ 157 /* chars[5] == literal next character */ 158 unsigned mode; 159 }; 160 161 struct rex_ttysize { 162 int ts_lines; 163 int ts_cols; 164 }; 165 166 struct rex_ttymode { 167 sgttyb basic; /* standard unix tty flags */ 168 tchars more; /* interrupt, kill characters, etc. */ 169 ltchars yetmore; /* special Berkeley characters */ 170 unsigned andmore; /* and Berkeley modes */ 171 }; 172 173 /* values for andmore above */ 174 const LCRTBS = 0x0001; /* do backspacing for crt */ 175 const LPRTERA = 0x0002; /* \ ... / erase */ 176 const LCRTERA = 0x0004; /* " \b " to wipe out char */ 177 const LTILDE = 0x0008; /* hazeltine tilde kludge */ 178 const LMDMBUF = 0x0010; /* start/stop output on carrier intr */ 179 const LLITOUT = 0x0020; /* literal output */ 180 const LTOSTOP = 0x0040; /* SIGTTOU on background output */ 181 const LFLUSHO = 0x0080; /* flush output to terminal */ 182 const LNOHANG = 0x0100; /* no SIGHUP on carrier drop */ 183 const LL001000 = 0x0200; 184 const LCRTKIL = 0x0400; /* kill line with " \b " */ 185 const LPASS8 = 0x0800; 186 const LCTLECH = 0x1000; /* echo control chars as ^X */ 187 const LPENDIN = 0x2000; /* needs reread */ 188 const LDECCTQ = 0x4000; /* only ^Q starts after ^S */ 189 const LNOFLSH = 0x8000; /* no output flush on signal */ 190 191 program REXPROG { 192 version REXVERS { 193 194 /* 195 * Start remote execution 196 */ 197 rex_result 198 REXPROC_START(rex_start) = 1; 199 200 /* 201 * Wait for remote execution to terminate 202 */ 203 rex_result 204 REXPROC_WAIT(void) = 2; 205 206 /* 207 * Send tty modes 208 */ 209 void 210 REXPROC_MODES(rex_ttymode) = 3; 211 212 /* 213 * Send window size change 214 */ 215 void 216 REXPROC_WINCH(rex_ttysize) = 4; 217 218 /* 219 * Send other signal 220 */ 221 void 222 REXPROC_SIGNAL(int) = 5; 223 } = 1; 224 } = 100017; 225