1 /* 2 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 3 * Use is subject to license terms. 4 */ 5 6 /* 7 * Copyright (c) 2001 Atsushi Onoe 8 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. The name of the author may not be used to endorse or promote products 20 * derived from this software without specific prior written permission. 21 * 22 * Alternatively, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") version 2 as published by the Free 24 * Software Foundation. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 27 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 28 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 29 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 30 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 31 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 32 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 33 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 34 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 35 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 #pragma ident "%Z%%M% %I% %E% SMI" 39 40 #ifndef _SYS_NET80211_IMPL_H 41 #define _SYS_NET80211_IMPL_H 42 43 #include <sys/sysmacros.h> 44 #include <sys/list.h> 45 #include <sys/note.h> 46 #include <sys/net80211_proto.h> 47 #include <sys/net80211.h> 48 #include <sys/mac_wifi.h> 49 50 /* 51 * IEEE802.11 kernel support module 52 */ 53 54 #ifdef __cplusplus 55 extern "C" { 56 #endif 57 58 #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM */ 59 #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ 60 61 #define IEEE80211_DTIM_MAX 15 /* max DTIM period */ 62 #define IEEE80211_DTIM_MIN 1 /* min DTIM period */ 63 #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ 64 65 /* NB: min+max come from WiFi requirements */ 66 #define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TU's) */ 67 #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */ 68 #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ 69 70 #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ 71 #define IEEE80211_SWBMISS_THRESHOLD 50 /* s/w bmiss threshold (TU's) */ 72 #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ 73 74 #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ 75 #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ 76 77 #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX 78 #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX 79 80 /* 81 * The RSSI values of two node are taken as almost the same when 82 * the difference between these two node's RSSI values is within 83 * IEEE80211_RSSI_CMP_THRESHOLD 84 */ 85 #define IEEE80211_RSSI_CMP_THRESHOLD 5 86 87 /* 88 * Each ieee80211com instance has a single timer that fires once a 89 * second. This is used to initiate various work depending on the 90 * state of the instance: scanning (passive or active), ``transition'' 91 * (waiting for a response to a management frame when operating 92 * as a station), and node inactivity processing (when operating 93 * as an AP). For inactivity processing each node has a timeout 94 * set in it's in_inact field that is decremented on each timeout 95 * and the node is reclaimed when the counter goes to zero. We 96 * use different inactivity timeout values depending on whether 97 * the node is associated and authorized (either by 802.1x or 98 * open/shared key authentication) or associated but yet to be 99 * authorized. The latter timeout is shorter to more aggressively 100 * reclaim nodes that leave part way through the 802.1x exchange. 101 * 102 * IEEE80211_INACT_WAIT defines node table's inactivity interval in 103 * seconds. On timeout, node table's registered nt_timeout callback 104 * function is executed. Each node in the node table has a timeout 105 * set in its in_inact field with IEEE80211_INACT_<state>. In 106 * nt_timeout function, node table is iterated and each node's 107 * in_inact is decremented. So IEEE80211_INACT_<state> is defined in 108 * the form [inact_sec]/IEEE80211_INACT_WAIT. 109 * 110 */ 111 #define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */ 112 #define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */ 113 #define IEEE80211_INACT_ASSOC (180/IEEE80211_INACT_WAIT) 114 /* associated but not authorized */ 115 #define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */ 116 #define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */ 117 #define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */ 118 119 #define IEEE80211_TRANS_WAIT 5 /* mgt frame tx timer (secs) */ 120 121 /* 122 * Useful combinations of channel characteristics. 123 */ 124 #define IEEE80211_CHAN_FHSS \ 125 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) 126 #define IEEE80211_CHAN_A \ 127 (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) 128 #define IEEE80211_CHAN_B \ 129 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) 130 #define IEEE80211_CHAN_PUREG \ 131 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) 132 #define IEEE80211_CHAN_G \ 133 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) 134 #define IEEE80211_CHAN_T \ 135 (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) 136 #define IEEE80211_CHAN_108G \ 137 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) 138 139 #define IEEE80211_CHAN_ALL \ 140 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ 141 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN) 142 #define IEEE80211_CHAN_ALLTURBO \ 143 (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO) 144 145 #define IEEE80211_IS_CHAN_FHSS(_c) \ 146 (((_c)->ich_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) 147 #define IEEE80211_IS_CHAN_A(_c) \ 148 (((_c)->ich_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) 149 #define IEEE80211_IS_CHAN_B(_c) \ 150 (((_c)->ich_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) 151 #define IEEE80211_IS_CHAN_PUREG(_c) \ 152 (((_c)->ich_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) 153 #define IEEE80211_IS_CHAN_G(_c) \ 154 (((_c)->ich_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) 155 #define IEEE80211_IS_CHAN_ANYG(_c) \ 156 (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) 157 #define IEEE80211_IS_CHAN_T(_c) \ 158 (((_c)->ich_flags & IEEE80211_CHAN_T) == IEEE80211_CHAN_T) 159 #define IEEE80211_IS_CHAN_108G(_c) \ 160 (((_c)->ich_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) 161 162 #define IEEE80211_IS_CHAN_OFDM(_c) \ 163 ((_c)->ich_flags & IEEE80211_CHAN_OFDM) 164 #define IEEE80211_IS_CHAN_CCK(_c) \ 165 ((_c)->ich_flags & IEEE80211_CHAN_CCK) 166 #define IEEE80211_IS_CHAN_GFSK(_c) \ 167 ((_c)->ich_flags & IEEE80211_CHAN_GFSK) 168 #define IEEE80211_IS_CHAN_PASSIVE(_c) \ 169 ((_c)->ich_flags & IEEE80211_CHAN_PASSIVE) 170 171 /* ni_chan encoding for FH phy */ 172 #define IEEE80211_FH_CHANMOD 80 173 #define IEEE80211_FH_CHAN(set, pat) \ 174 (((set) - 1) * IEEE80211_FH_CHANMOD + (pat)) 175 #define IEEE80211_FH_CHANSET(chan) \ 176 ((chan) / IEEE80211_FH_CHANMOD + 1) 177 #define IEEE80211_FH_CHANPAT(chan) \ 178 ((chan) % IEEE80211_FH_CHANMOD) 179 180 #define IEEE80211_NODE_AUTH 0x0001 /* authorized for data */ 181 #define IEEE80211_NODE_QOS 0x0002 /* QoS enabled */ 182 #define IEEE80211_NODE_ERP 0x0004 /* ERP enabled */ 183 #define IEEE80211_NODE_PWR_MGT 0x0010 /* power save mode enabled */ 184 #define IEEE80211_NODE_AREF 0x0020 /* authentication ref held */ 185 186 #define IEEE80211_MAXRSSI 127 187 188 /* Debug Flags */ 189 #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ 190 #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ 191 #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ 192 #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ 193 #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ 194 #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ 195 #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ 196 #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ 197 #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ 198 #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ 199 #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ 200 #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ 201 #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ 202 #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ 203 #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ 204 #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ 205 #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ 206 #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */ 207 #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ 208 #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ 209 #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ 210 #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ 211 #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ 212 #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ 213 #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ 214 #define IEEE80211_MSG_CONFIG 0x00000020 /* wificonfig/dladm */ 215 #define IEEE80211_MSG_ANY 0xffffffff /* anything */ 216 217 /* Error flags returned by ieee80211_match_bss */ 218 #define IEEE80211_BADCHAN 0x01 219 #define IEEE80211_BADOPMODE 0x02 220 #define IEEE80211_BADPRIVACY 0x04 221 #define IEEE80211_BADRATE 0x08 222 #define IEEE80211_BADESSID 0x10 223 #define IEEE80211_BADBSSID 0x20 224 #define IEEE80211_NODEFAIL 0x40 225 226 typedef struct ieee80211_impl { 227 struct ieee80211com *ic; 228 uint8_t im_chan_avail[IEEE80211_CHAN_BYTES]; 229 uint8_t im_chan_scan[IEEE80211_CHAN_BYTES]; 230 231 uint8_t im_bmiss_count; /* current beacon miss count */ 232 int32_t im_bmiss_max; /* max bmiss before scan */ 233 timeout_id_t im_swbmiss; 234 uint16_t im_swbmiss_count; /* beacons in last period */ 235 uint16_t im_swbmiss_period; /* s/w bmiss period */ 236 237 int32_t im_mgt_timer; /* mgmt timeout, secs */ 238 int32_t im_inact_timer; /* inactivity timer wait, sec */ 239 int32_t im_inact_init; /* initial setting */ 240 int32_t im_inact_assoc; /* assoc but not authorized */ 241 int32_t im_inact_run; /* authorized setting */ 242 int32_t im_inact_probe; /* inactive probe time */ 243 244 kcondvar_t im_scan_cv; /* wait scan complete */ 245 } ieee80211_impl_t; 246 247 /* 248 * Parameters supplied when adding/updating an entry in a 249 * scan cache. Pointer variables should be set to NULL 250 * if no data is available. Pointer references can be to 251 * local data; any information that is saved will be copied. 252 * All multi-byte values must be in host byte order. 253 */ 254 struct ieee80211_scanparams { 255 uint16_t capinfo; /* 802.11 capabilities */ 256 enum ieee80211_phytype phytype; 257 uint16_t fhdwell; /* FHSS dwell interval */ 258 uint8_t chan; 259 uint8_t bchan; 260 uint8_t fhindex; 261 uint8_t erp; 262 uint16_t bintval; 263 uint8_t timoff; 264 uint8_t *tim; 265 uint8_t *tstamp; 266 uint8_t *country; 267 uint8_t *ssid; 268 uint8_t *rates; 269 uint8_t *xrates; 270 uint8_t *wpa; 271 uint8_t *wme; 272 }; 273 274 #define IEEE80211_SEND_MGMT(_ic, _in, _type, _arg) \ 275 ((*(_ic)->ic_send_mgmt)((_ic), (_in), (_type), (_arg))) 276 277 /* Verify the existence and length of __elem or get out. */ 278 #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, __func) do { \ 279 _NOTE(CONSTCOND) \ 280 if ((__elem) == NULL) { \ 281 ieee80211_err("ieee80211: no #__elem \n"); \ 282 __func; \ 283 } \ 284 if ((__elem)[1] > (__maxlen)) { \ 285 ieee80211_err("ieee80211: bad "#__elem " len %d\n", \ 286 (__elem)[1]); \ 287 __func; \ 288 } \ 289 _NOTE(CONSTCOND) \ 290 } while (0) 291 292 #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _func) do { \ 293 _NOTE(CONSTCOND) \ 294 if ((_len) < (_minlen)) { \ 295 ieee80211_dbg(IEEE80211_MSG_ELEMID, \ 296 "ie of type %s too short", \ 297 ieee80211_mgt_subtype_name[subtype >> \ 298 IEEE80211_FC0_SUBTYPE_SHIFT]); \ 299 _func; \ 300 } \ 301 _NOTE(CONSTCOND) \ 302 } while (0) 303 304 #define IEEE80211_VERIFY_SSID(_in, _ssid, _func) do { \ 305 _NOTE(CONSTCOND) \ 306 ASSERT((_in) != NULL); \ 307 if ((_ssid)[1] != 0 && \ 308 ((_ssid)[1] != (_in)->in_esslen || \ 309 bcmp((_ssid) + 2, (_in)->in_essid, (_ssid)[1]) != 0)) { \ 310 _func; \ 311 } \ 312 _NOTE(CONSTCOND) \ 313 } while (0) 314 315 #define ieee80211_setbit(a, i) ((a)[(i)/NBBY] |= (1 << ((i)%NBBY))) 316 #define ieee80211_clrbit(a, i) ((a)[(i)/NBBY] &= ~(1 << ((i)%NBBY))) 317 #define ieee80211_isset(a, i) ((a)[(i)/NBBY] & (1 << ((i)%NBBY))) 318 #define ieee80211_isclr(a, i) (!((a)[(i)/NBBY] & (1 << ((i)%NBBY)))) 319 320 #define IEEE80211_N(a) (sizeof (a) / sizeof (a[0])) 321 322 #define IEEE80211_LOCK(_ic) \ 323 mutex_enter(&(_ic)->ic_genlock) 324 #define IEEE80211_UNLOCK(_ic) \ 325 mutex_exit(&(_ic)->ic_genlock) 326 #define IEEE80211_IS_LOCKED(_ic) \ 327 mutex_owned(&(_ic)->ic_genlock) 328 #define IEEE80211_LOCK_ASSERT(_ic) \ 329 ASSERT(mutex_owned(&(_ic)->ic_genlock)) 330 331 #define IEEE80211_NODE_LOCK(_nt) \ 332 mutex_enter(&(_nt)->nt_nodelock) 333 #define IEEE80211_NODE_UNLOCK(_nt) \ 334 mutex_exit(&(_nt)->nt_nodelock) 335 #define IEEE80211_NODE_IS_LOCKED(_nt) \ 336 mutex_owned(&(_nt)->nt_nodelock) 337 #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ 338 ASSERT(mutex_owned(&(_nt)->nt_nodelock)) 339 #define ieee80211_node_hash(addr) \ 340 (((uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % IEEE80211_NODE_HASHSIZE) 341 342 #define IEEE80211_SCAN_LOCK(_nt) mutex_enter(&(_nt)->nt_scanlock) 343 #define IEEE80211_SCAN_UNLOCK(_nt) mutex_exit(&(_nt)->nt_scanlock) 344 345 #define IEEE80211_RV(v) ((v) & IEEE80211_RATE_VAL) 346 347 #define IEEE80211_SUBTYPE_NAME(subtype) \ 348 ieee80211_mgt_subtype_name[(subtype) >> IEEE80211_FC0_SUBTYPE_SHIFT] 349 350 extern const char *ieee80211_mgt_subtype_name[]; 351 extern const char *ieee80211_phymode_name[]; 352 353 void ieee80211_err(const int8_t *, ...); 354 void ieee80211_dbg(uint32_t, const int8_t *, ...); 355 int ieee80211_hdrspace(const void *); 356 357 void ieee80211_notify(ieee80211com_t *, wpa_event_type); 358 void ieee80211_mac_update(ieee80211com_t *); 359 360 uint64_t ieee80211_read_6(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t); 361 362 /* node */ 363 void ieee80211_node_attach(ieee80211com_t *); 364 void ieee80211_node_lateattach(ieee80211com_t *); 365 void ieee80211_node_detach(ieee80211com_t *); 366 void ieee80211_reset_bss(ieee80211com_t *); 367 void ieee80211_cancel_scan(ieee80211com_t *); 368 void ieee80211_add_scan(ieee80211com_t *, const struct ieee80211_scanparams *, 369 const struct ieee80211_frame *, int, int, int); 370 void ieee80211_init_neighbor(ieee80211_node_t *, const struct ieee80211_frame *, 371 const struct ieee80211_scanparams *); 372 ieee80211_node_t *ieee80211_add_neighbor(ieee80211com_t *, 373 const struct ieee80211_frame *, const struct ieee80211_scanparams *); 374 void ieee80211_create_ibss(ieee80211com_t *, struct ieee80211_channel *); 375 ieee80211_node_t *ieee80211_fakeup_adhoc_node(ieee80211_node_table_t *, 376 const uint8_t *); 377 ieee80211_node_t *ieee80211_tmp_node(ieee80211com_t *, const uint8_t *); 378 379 /* proto */ 380 void ieee80211_proto_attach(ieee80211com_t *); 381 int ieee80211_fix_rate(ieee80211_node_t *, int); 382 void ieee80211_setbasicrates(struct ieee80211_rateset *, 383 enum ieee80211_phymode); 384 void ieee80211_reset_erp(ieee80211com_t *); 385 void ieee80211_set_shortslottime(ieee80211com_t *, boolean_t); 386 387 /* input */ 388 int ieee80211_setup_rates(ieee80211_node_t *, const uint8_t *, 389 const uint8_t *, int); 390 void ieee80211_recv_mgmt(ieee80211com_t *, mblk_t *, ieee80211_node_t *, 391 int, int, uint32_t); 392 393 /* output */ 394 int ieee80211_send_probereq(ieee80211_node_t *, const uint8_t *, 395 const uint8_t *, const uint8_t *, const uint8_t *, size_t, const void *, 396 size_t); 397 int ieee80211_send_mgmt(ieee80211com_t *, ieee80211_node_t *, int, int); 398 int ieee80211_send_nulldata(ieee80211_node_t *); 399 400 /* crypto */ 401 struct ieee80211_key *ieee80211_crypto_getkey(ieee80211com_t *); 402 uint8_t ieee80211_crypto_getciphertype(ieee80211com_t *); 403 404 /* generic */ 405 mblk_t *ieee80211_getmgtframe(uint8_t **, int); 406 void ieee80211_notify_node_join(ieee80211com_t *, ieee80211_node_t *); 407 void ieee80211_notify_node_leave(ieee80211com_t *, ieee80211_node_t *); 408 409 #ifdef __cplusplus 410 } 411 #endif 412 413 #endif /* _SYS_NET80211_IMPL_H */ 414