xref: /titanic_51/usr/src/uts/common/io/chxge/com/mv88e1xxx.c (revision dd51520e127b452179a2ce4ea3bd8dee949f9afe)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (C) 2003-2005 Chelsio Communications.  All rights reserved.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"	/* mv88e1xxx.c */
27 
28 #include "common.h"
29 #include "mv88e1xxx.h"
30 #include "cphy.h"
31 #include "elmer0.h"
32 
33 /* MV88E1XXX MDI crossover register values */
34 #define CROSSOVER_MDI   0
35 #define CROSSOVER_MDIX  1
36 #define CROSSOVER_AUTO  3
37 
38 #define INTR_ENABLE_MASK 0x6CA0
39 
40 /*
41  * Set the bits given by 'bitval' in PHY register 'reg'.
42  */
43 static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval)
44 {
45 	u32 val;
46 
47 	(void) simple_mdio_read(cphy, reg, &val);
48 	(void) simple_mdio_write(cphy, reg, val | bitval);
49 }
50 
51 /*
52  * Clear the bits given by 'bitval' in PHY register 'reg'.
53  */
54 static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
55 {
56 	u32 val;
57 
58 	(void) simple_mdio_read(cphy, reg, &val);
59 	(void) simple_mdio_write(cphy, reg, val & ~bitval);
60 }
61 
62 /*
63  * NAME:   phy_reset
64  *
65  * DESC:   Reset the given PHY's port. NOTE: This is not a global
66  *         chip reset.
67  *
68  * PARAMS: cphy     - Pointer to PHY instance data.
69  *
70  * RETURN:  0 - Successfull reset.
71  *         -1 - Timeout.
72  */
73 /* ARGSUSED */
74 static int mv88e1xxx_reset(struct cphy *cphy, int wait)
75 {
76 	u32 ctl;
77 	int time_out = 1000;
78 
79 	mdio_set_bit(cphy, MII_BMCR, BMCR_RESET);
80 
81 	do {
82 		(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
83 		ctl &= BMCR_RESET;
84 		if (ctl)
85 			DELAY_US(1);
86 	} while (ctl && --time_out);
87 
88 	return ctl ? -1 : 0;
89 }
90 
91 static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
92 {
93 	/* Enable PHY interrupts. */
94 	(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
95 		   INTR_ENABLE_MASK);
96 
97 	/* Enable Marvell interrupts through Elmer0. */
98 	if (t1_is_asic(cphy->adapter)) {
99 		u32 elmer;
100 
101 		(void) t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
102 		elmer |= ELMER0_GP_BIT1;
103 		if (is_T2(cphy->adapter)) {
104 			elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
105 		}
106 		(void) t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
107 	}
108 	return 0;
109 }
110 
111 static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
112 {
113 	/* Disable all phy interrupts. */
114 	(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
115 
116 	/* Disable Marvell interrupts through Elmer0. */
117 	if (t1_is_asic(cphy->adapter)) {
118 		u32 elmer;
119 
120 		(void) t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
121 		elmer &= ~ELMER0_GP_BIT1;
122 		if (is_T2(cphy->adapter)) {
123 			elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
124 		}
125 		(void) t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
126 	}
127 	return 0;
128 }
129 
130 static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
131 {
132 	u32 elmer;
133 
134 	/* Clear PHY interrupts by reading the register. */
135 	(void) simple_mdio_read(cphy, MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
136 
137 	/* Clear Marvell interrupts through Elmer0. */
138 	if (t1_is_asic(cphy->adapter)) {
139 		(void) t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
140 		elmer |= ELMER0_GP_BIT1;
141 		if (is_T2(cphy->adapter)) {
142 			elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
143 		}
144 		(void) t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
145 	}
146 	return 0;
147 }
148 
149 /*
150  * Set the PHY speed and duplex.  This also disables auto-negotiation, except
151  * for 1Gb/s, where auto-negotiation is mandatory.
152  */
153 static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex)
154 {
155 	u32 ctl;
156 
157 	(void) simple_mdio_read(phy, MII_BMCR, &ctl);
158 	if (speed >= 0) {
159 		ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
160 		if (speed == SPEED_100)
161 			ctl |= BMCR_SPEED100;
162 		else if (speed == SPEED_1000)
163 			ctl |= BMCR_SPEED1000;
164 	}
165 	if (duplex >= 0) {
166 		ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
167 		if (duplex == DUPLEX_FULL)
168 			ctl |= BMCR_FULLDPLX;
169 	}
170 	if (ctl & BMCR_SPEED1000)  /* auto-negotiation required for 1Gb/s */
171 		ctl |= BMCR_ANENABLE;
172 	(void) simple_mdio_write(phy, MII_BMCR, ctl);
173 	return 0;
174 }
175 
176 static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
177 {
178 	u32 data32;
179 
180 	(void) simple_mdio_read(cphy, MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32);
181 	data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE);
182 	data32 |= V_PSCR_MDI_XOVER_MODE(crossover);
183 	(void) simple_mdio_write(cphy, MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32);
184 	return 0;
185 }
186 
187 static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
188 {
189 	u32 ctl;
190 
191 	(void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
192 
193 	(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
194 	/* restart autoneg for change to take effect */
195 	ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
196 	(void) simple_mdio_write(cphy, MII_BMCR, ctl);
197 	return 0;
198 }
199 
200 static int mv88e1xxx_autoneg_disable(struct cphy *cphy)
201 {
202 	u32 ctl;
203 
204 	/*
205 	 * Crossover *must* be set to manual in order to disable auto-neg.
206 	 * The Alaska FAQs document highlights this point.
207 	 */
208 	(void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI);
209 
210 	/*
211 	 * Must include autoneg reset when disabling auto-neg. This
212 	 * is described in the Alaska FAQ document.
213 	 */
214 	(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
215 	ctl &= ~BMCR_ANENABLE;
216 	(void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART);
217 	return 0;
218 }
219 
220 static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
221 {
222 	mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART);
223 	return 0;
224 }
225 
226 static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map)
227 {
228 	u32 val = 0;
229 
230 	if (advertise_map &
231 	    (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
232 		(void) simple_mdio_read(phy, MII_GBCR, &val);
233 		val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL);
234 		if (advertise_map & ADVERTISED_1000baseT_Half)
235 			val |= GBCR_ADV_1000HALF;
236 		if (advertise_map & ADVERTISED_1000baseT_Full)
237 			val |= GBCR_ADV_1000FULL;
238 	}
239 	(void) simple_mdio_write(phy, MII_GBCR, val);
240 
241 	val = 1;
242 	if (advertise_map & ADVERTISED_10baseT_Half)
243 		val |= ADVERTISE_10HALF;
244 	if (advertise_map & ADVERTISED_10baseT_Full)
245 		val |= ADVERTISE_10FULL;
246 	if (advertise_map & ADVERTISED_100baseT_Half)
247 		val |= ADVERTISE_100HALF;
248 	if (advertise_map & ADVERTISED_100baseT_Full)
249 		val |= ADVERTISE_100FULL;
250 	if (advertise_map & ADVERTISED_PAUSE)
251 		val |= ADVERTISE_PAUSE;
252 	if (advertise_map & ADVERTISED_ASYM_PAUSE)
253 		val |= ADVERTISE_PAUSE_ASYM;
254 	(void) simple_mdio_write(phy, MII_ADVERTISE, val);
255 	return 0;
256 }
257 
258 static int mv88e1xxx_set_loopback(struct cphy *cphy, int on)
259 {
260 	if (on)
261 		mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
262 	else
263 		mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
264 	return 0;
265 }
266 
267 static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
268 				     int *speed, int *duplex, int *fc)
269 {
270 	u32 status;
271 	int sp = -1, dplx = -1, pause = 0;
272 
273 	(void) simple_mdio_read(cphy, MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
274 	if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
275 		if (status & V_PSSR_RX_PAUSE)
276 			pause |= PAUSE_RX;
277 		if (status & V_PSSR_TX_PAUSE)
278 			pause |= PAUSE_TX;
279 		dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
280 		sp = G_PSSR_SPEED(status);
281 		if (sp == 0)
282 			sp = SPEED_10;
283 		else if (sp == 1)
284 			sp = SPEED_100;
285 		else
286 			sp = SPEED_1000;
287 	}
288 	if (link_ok)
289 		*link_ok = (status & V_PSSR_LINK) != 0;
290 	if (speed)
291 		*speed = sp;
292 	if (duplex)
293 		*duplex = dplx;
294 	if (fc)
295 		*fc = pause;
296 	return 0;
297 }
298 
299 static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
300 {
301 	u32 val;
302 
303 	(void) simple_mdio_read(cphy, MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val);
304 
305 	/*
306 	 * Set the downshift counter to 2 so we try to establish Gb link
307 	 * twice before downshifting.
308 	 */
309 	val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT));
310 
311 	if (downshift_enable)
312 		val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2);
313 	(void) simple_mdio_write(cphy, MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val);
314 	return 0;
315 }
316 
317 static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
318 {
319 	int cphy_cause = 0;
320 	u32 status;
321 
322 	/*
323 	 * Loop until cause reads zero. Need to handle bouncing interrupts.
324          */
325 	/*CONSTCOND*/
326 	while (1) {
327 		u32 cause;
328 
329 		(void) simple_mdio_read(cphy, MV88E1XXX_INTERRUPT_STATUS_REGISTER,
330 				 &cause);
331 		cause &= INTR_ENABLE_MASK;
332 		if (!cause) break;
333 
334 		if (cause & MV88E1XXX_INTR_LINK_CHNG) {
335 			(void) simple_mdio_read(cphy,
336 				MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
337 
338 			if (status & MV88E1XXX_INTR_LINK_CHNG) {
339 				cphy->state |= PHY_LINK_UP;
340 			} else {
341 				cphy->state &= ~PHY_LINK_UP;
342 				if (cphy->state & PHY_AUTONEG_EN)
343 					cphy->state &= ~PHY_AUTONEG_RDY;
344 				cphy_cause |= cphy_cause_link_change;
345 			}
346 		}
347 
348 		if (cause & MV88E1XXX_INTR_AUTONEG_DONE)
349 			cphy->state |= PHY_AUTONEG_RDY;
350 
351 		if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) ==
352 			(PHY_LINK_UP | PHY_AUTONEG_RDY))
353 				cphy_cause |= cphy_cause_link_change;
354 	}
355 	return cphy_cause;
356 }
357 
358 static void mv88e1xxx_destroy(struct cphy *cphy)
359 {
360 	t1_os_free((void *)cphy, sizeof(*cphy));
361 }
362 
363 #ifdef C99_NOT_SUPPORTED
364 static struct cphy_ops mv88e1xxx_ops = {
365 	mv88e1xxx_destroy,
366 	mv88e1xxx_reset,
367 	mv88e1xxx_interrupt_enable,
368 	mv88e1xxx_interrupt_disable,
369 	mv88e1xxx_interrupt_clear,
370 	mv88e1xxx_interrupt_handler,
371 	mv88e1xxx_autoneg_enable,
372 	mv88e1xxx_autoneg_disable,
373 	mv88e1xxx_autoneg_restart,
374 	mv88e1xxx_advertise,
375 	mv88e1xxx_set_loopback,
376 	mv88e1xxx_set_speed_duplex,
377 	mv88e1xxx_get_link_status,
378 };
379 #else
380 static struct cphy_ops mv88e1xxx_ops = {
381 	.destroy              = mv88e1xxx_destroy,
382 	.reset                = mv88e1xxx_reset,
383 	.interrupt_enable     = mv88e1xxx_interrupt_enable,
384 	.interrupt_disable    = mv88e1xxx_interrupt_disable,
385 	.interrupt_clear      = mv88e1xxx_interrupt_clear,
386 	.interrupt_handler    = mv88e1xxx_interrupt_handler,
387 	.autoneg_enable       = mv88e1xxx_autoneg_enable,
388 	.autoneg_disable      = mv88e1xxx_autoneg_disable,
389 	.autoneg_restart      = mv88e1xxx_autoneg_restart,
390 	.advertise            = mv88e1xxx_advertise,
391 	.set_loopback         = mv88e1xxx_set_loopback,
392 	.set_speed_duplex     = mv88e1xxx_set_speed_duplex,
393 	.get_link_status      = mv88e1xxx_get_link_status,
394 };
395 #endif
396 
397 static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr,
398 					 struct mdio_ops *mdio_ops)
399 {
400 	struct cphy *cphy = t1_os_malloc_wait_zero(sizeof(*cphy));
401 
402 	if (!cphy) return NULL;
403 
404 	cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
405 
406 	/* Configure particular PHY's to run in a different mode. */
407 	if ((board_info(adapter)->caps & SUPPORTED_TP) &&
408 	    board_info(adapter)->chip_phy == CHBT_PHY_88E1111) {
409 		/*
410 		 * Configure the PHY transmitter as class A to reduce EMI.
411 		 */
412 		(void) simple_mdio_write(cphy, MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB);
413 		(void) simple_mdio_write(cphy, MV88E1XXX_EXTENDED_REGISTER, 0x8004);
414 	}
415 	(void) mv88e1xxx_downshift_set(cphy, 1);   /* Enable downshift */
416 
417 	/* LED */
418 	if (is_T2(adapter)) {
419 		(void) simple_mdio_write(cphy,
420 			MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
421 	}
422 
423 	return cphy;
424 }
425 
426 /* ARGSUSED */
427 static int mv88e1xxx_phy_reset(adapter_t* adapter)
428 {
429 	return 0;
430 }
431 
432 struct gphy t1_mv88e1xxx_ops = {
433 	mv88e1xxx_phy_create,
434 	mv88e1xxx_phy_reset
435 };
436