1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25# 26 27include ../Makefile.master 28 29# Note that libcurses installs commands along with its library. 30# This is a minor bug which probably should be fixed. 31# Note also that a few extra libraries are kept in cmd source. 32# 33# Certain libraries are linked with, hence depend on, other libraries. 34# 35# Although we have historically used .WAIT to express dependencies, it 36# reduces the amount of parallelism and thus lengthens the time it 37# takes to build the libraries. Thus, we now require that any new 38# libraries explicitly call out their dependencies. Eventually, all 39# the library dependencies will be called out explicitly. See 40# "Library interdependencies" near the end of this file. 41# 42# Aside from explicit dependencies (and legacy .WAITs), all libraries 43# are built in parallel. 44# 45.PARALLEL: 46 47# 48# The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, 49# but required due to the "dependencies" of using .WAIT to barrier the 50# parallel dmake builds. once 4631488 has been fixed, they can be 51# consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as 52# shown in HDRSUBDIRS 53# 54SUBDIRS= \ 55 common .WAIT \ 56 ../cmd/sgs/libconv \ 57 ../cmd/sgs/libdl .WAIT 58 59$(CLOSED_BUILD)SUBDIRS += \ 60 $(CLOSED)/lib/libc_i18n 61 62SUBDIRS += \ 63 libc .WAIT \ 64 ../cmd/sgs/libelf .WAIT \ 65 c_synonyms \ 66 libmd \ 67 libmd5 \ 68 librsm \ 69 libmp .WAIT \ 70 libnsl \ 71 libsecdb .WAIT \ 72 librpcsvc \ 73 libsocket .WAIT \ 74 libsctp \ 75 libsip \ 76 libcommputil \ 77 libresolv \ 78 libresolv2 .WAIT \ 79 libw .WAIT \ 80 libintl .WAIT \ 81 ../cmd/sgs/librtld_db \ 82 libaio \ 83 libast \ 84 libdll \ 85 libcmd \ 86 libshell \ 87 libsum \ 88 librt \ 89 libadm \ 90 libctf \ 91 libdtrace \ 92 libdtrace_jni \ 93 libcurses \ 94 libgen \ 95 libgss \ 96 libpam \ 97 libuuid \ 98 libthread \ 99 libpthread .WAIT \ 100 libslp \ 101 libbsdmalloc \ 102 libdoor \ 103 libdevinfo \ 104 libdladm \ 105 libdlpi \ 106 libeti \ 107 libcrypt \ 108 libdns_sd \ 109 libefi \ 110 libfstyp \ 111 libwanboot \ 112 libwanbootutil \ 113 libcryptoutil \ 114 libinetcfg \ 115 libinetutil \ 116 libipmp \ 117 libiscsit \ 118 libiscsitgt \ 119 libkmf \ 120 libkstat \ 121 libkvm \ 122 liblm \ 123 libmalloc \ 124 libmapmalloc \ 125 libmtmalloc \ 126 libnls \ 127 libnwam \ 128 libsmbios \ 129 libtecla \ 130 libumem \ 131 libnvpair .WAIT \ 132 libexacct \ 133 libplot \ 134 libldap4 \ 135 libsasl \ 136 libldap5 \ 137 libsldap .WAIT \ 138 libbsm \ 139 libsys \ 140 libsysevent \ 141 libnisdb \ 142 libpool \ 143 libpp \ 144 libproc \ 145 libproject \ 146 libsendfile \ 147 nametoaddr \ 148 ncad_addr \ 149 hbaapi \ 150 smhba \ 151 sun_fc \ 152 sun_sas \ 153 gss_mechs/mech_krb5 .WAIT \ 154 libkrb5 .WAIT \ 155 krb5 .WAIT \ 156 libsmbfs \ 157 libfcoe \ 158 libstmf \ 159 libstmfproxy \ 160 libnsctl \ 161 libunistat \ 162 libdscfg \ 163 librdc \ 164 libinstzones \ 165 libpkg 166 167SUBDIRS += \ 168 passwdutil \ 169 pam_modules \ 170 crypt_modules \ 171 libadt_jni \ 172 abi \ 173 auditd_plugins \ 174 libvolmgt \ 175 libdevice \ 176 libdevid \ 177 libdhcpsvc \ 178 libc_db \ 179 libndmp \ 180 libsec \ 181 libtnfprobe \ 182 libtnf \ 183 libtnfctl \ 184 libdhcpagent \ 185 libdhcpdu \ 186 libdhcputil \ 187 libipsecutil 188$(CLOSED_BUILD)SUBDIRS += \ 189 $(CLOSED)/lib/libike 190SUBDIRS += \ 191 nsswitch \ 192 print \ 193 libuutil \ 194 libscf \ 195 libinetsvc \ 196 librestart \ 197 libsched \ 198 libelfsign \ 199 pkcs11 .WAIT \ 200 libpctx .WAIT \ 201 libcpc \ 202 watchmalloc \ 203 extendedFILE \ 204 madv \ 205 mpss \ 206 libdisasm \ 207 libwrap \ 208 libxcurses \ 209 libxcurses2 \ 210 libxnet \ 211 libbrand .WAIT \ 212 libzonecfg \ 213 libzoneinfo \ 214 libtsnet \ 215 libtsol \ 216 gss_mechs/mech_spnego \ 217 gss_mechs/mech_dummy \ 218 gss_mechs/mech_dh \ 219 rpcsec_gss \ 220 libraidcfg .WAIT \ 221 librcm .WAIT \ 222 libcfgadm .WAIT \ 223 libpicl .WAIT \ 224 libpicltree .WAIT \ 225 raidcfg_plugins \ 226 cfgadm_plugins \ 227 libmail \ 228 lvm \ 229 libsmedia \ 230 libipp \ 231 libdiskmgt \ 232 liblgrp \ 233 libfsmgt \ 234 fm \ 235 libavl \ 236 libcmdutils \ 237 libcontract \ 238 ../cmd/sendmail/libmilter \ 239 sasl_plugins \ 240 udapl \ 241 libzpool \ 242 libzfs \ 243 libzfs_jni \ 244 pyzfs \ 245 libmapid \ 246 brand \ 247 policykit \ 248 hal \ 249 libshare \ 250 libsqlite \ 251 libidmap \ 252 libadutils \ 253 libipmi \ 254 libexacct/demo \ 255 libvscan \ 256 libgrubmgmt \ 257 smbsrv \ 258 scsi \ 259 mms \ 260 libima \ 261 libsun_ima \ 262 mpapi \ 263 librstp \ 264 libreparse \ 265 $($(MACH)_SUBDIRS) 266 267i386_SUBDIRS= \ 268 libntfs \ 269 libparted \ 270 libfdisk 271 272sparc_SUBDIRS= .WAIT \ 273 efcode \ 274 libc_psr .WAIT \ 275 libds \ 276 libdscp \ 277 libprtdiag .WAIT \ 278 libprtdiag_psr \ 279 libpri \ 280 librsc \ 281 libfruutils .WAIT \ 282 libfru \ 283 storage \ 284 libpcp \ 285 libtsalarm 286 287FM_sparc_DEPLIBS= libpri 288 289fm: \ 290 libexacct \ 291 libipmi \ 292 libzfs \ 293 scsi \ 294 $(FM_$(MACH)_DEPLIBS) 295 296# 297# Create a special version of $(SUBDIRS) with no .WAIT's, for use with the 298# clean and clobber targets (for more information, see those targets, below). 299# 300NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) 301 302DCSUBDIRS = \ 303 lvm 304 305MSGSUBDIRS= \ 306 abi \ 307 auditd_plugins \ 308 brand \ 309 cfgadm_plugins \ 310 gss_mechs/mech_dh \ 311 gss_mechs/mech_krb5 \ 312 krb5 \ 313 libast \ 314 libbsm \ 315 libc \ 316 libcfgadm \ 317 libcmd \ 318 libcontract \ 319 libcurses \ 320 libdhcpsvc \ 321 libdhcputil \ 322 libipsecutil \ 323 libdiskmgt \ 324 libdladm \ 325 libdll \ 326 libgrubmgmt \ 327 libgss \ 328 libidmap \ 329 libinetcfg \ 330 libipmp \ 331 libinetutil \ 332 libinstzones \ 333 libnsl \ 334 libpam \ 335 libpicl \ 336 libpool \ 337 libpkg \ 338 libpp \ 339 libscf \ 340 libsasl \ 341 libldap5 \ 342 libsecdb \ 343 libshare \ 344 libshell \ 345 libsldap \ 346 libslp \ 347 libsmbfs \ 348 libsmedia \ 349 libsum \ 350 libtsol \ 351 libuutil \ 352 libvscan \ 353 libwanboot \ 354 libwanbootutil \ 355 libzfs \ 356 libzonecfg \ 357 lvm \ 358 madv \ 359 mms \ 360 mpss \ 361 pam_modules \ 362 pyzfs \ 363 rpcsec_gss \ 364 libreparse 365MSGSUBDIRS += \ 366 $($(MACH)_MSGSUBDIRS) 367 368sparc_MSGSUBDIRS= \ 369 libprtdiag \ 370 libprtdiag_psr 371 372i386_MSGSUBDIRS= libfdisk 373 374HDRSUBDIRS= \ 375 auditd_plugins \ 376 libast \ 377 libbrand \ 378 libbsm \ 379 libc \ 380 libcmd \ 381 libcmdutils \ 382 libcontract \ 383 libcpc \ 384 libctf \ 385 libcurses \ 386 libcryptoutil \ 387 libdevice \ 388 libdevid \ 389 libdevinfo \ 390 libdiskmgt \ 391 libdladm \ 392 libdll \ 393 libdlpi \ 394 libdhcpagent \ 395 libdhcpsvc \ 396 libdhcputil \ 397 libdisasm \ 398 libdns_sd \ 399 libdscfg \ 400 libdtrace \ 401 libdtrace_jni \ 402 libelfsign \ 403 libeti \ 404 libfstyp \ 405 libgen \ 406 libwanboot \ 407 libwanbootutil \ 408 libipsecutil \ 409 libinetcfg \ 410 libinetsvc \ 411 libinetutil \ 412 libinstzones \ 413 libipmi \ 414 libipmp \ 415 libipp \ 416 libiscsit \ 417 libiscsitgt \ 418 libkstat \ 419 libkvm \ 420 libmail \ 421 libmd \ 422 libmtmalloc \ 423 libndmp \ 424 libnvpair \ 425 libnsctl \ 426 libnsl \ 427 libnwam \ 428 libpam \ 429 libpctx \ 430 libpicl \ 431 libpicltree \ 432 libplot \ 433 libpool \ 434 libpp \ 435 libproc \ 436 libraidcfg \ 437 librcm \ 438 librdc \ 439 libscf \ 440 libsip \ 441 libcommputil \ 442 libsmbios \ 443 librestart \ 444 librpcsvc \ 445 librsm \ 446 librstp \ 447 libsasl \ 448 libsec \ 449 libshell \ 450 libslp \ 451 libsmedia \ 452 libsqlite \ 453 libfcoe \ 454 libstmf \ 455 libstmfproxy \ 456 libsum \ 457 libsysevent \ 458 libtecla \ 459 libtnf \ 460 libtnfctl \ 461 libtnfprobe \ 462 libtsnet \ 463 libtsol \ 464 libvolmgt \ 465 libumem \ 466 libunistat \ 467 libuutil \ 468 libwrap \ 469 libxcurses2 \ 470 libzfs \ 471 libzfs_jni \ 472 libzoneinfo \ 473 hal \ 474 policykit \ 475 lvm \ 476 pkcs11 \ 477 passwdutil \ 478 ../cmd/sendmail/libmilter \ 479 fm \ 480 udapl \ 481 libmapid \ 482 libkrb5 \ 483 libsmbfs \ 484 libshare \ 485 libidmap \ 486 libvscan \ 487 libgrubmgmt \ 488 smbsrv \ 489 scsi \ 490 hbaapi \ 491 smhba \ 492 libima \ 493 libsun_ima \ 494 mpapi \ 495 mms \ 496 libreparse \ 497 $($(MACH)_HDRSUBDIRS) 498 499$(CLOSED_BUILD)HDRSUBDIRS += \ 500 $(CLOSED)/lib/libc_i18n \ 501 $(CLOSED)/lib/libike 502 503i386_HDRSUBDIRS= \ 504 libparted \ 505 libfdisk 506 507sparc_HDRSUBDIRS= \ 508 libds \ 509 libdscp \ 510 libpri \ 511 storage 512 513all := TARGET= all 514check := TARGET= check 515clean := TARGET= clean 516clobber := TARGET= clobber 517install := TARGET= install 518install_h := TARGET= install_h 519lint := TARGET= lint 520_dc := TARGET= _dc 521_msg := TARGET= _msg 522 523.KEEP_STATE: 524 525# 526# For the all and install targets, we clearly must respect library 527# dependencies so that the libraries link correctly. However, for 528# the remaining targets (check, clean, clobber, install_h, lint, _dc 529# and _msg), libraries do not have any dependencies on one another 530# and thus respecting dependencies just slows down the build. 531# As such, for these rules, we use pattern replacement to explicitly 532# avoid triggering the dependency information. Note that for clean, 533# clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than 534# $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. 535# 536 537all: $(SUBDIRS) 538 539install: $(SUBDIRS) .WAIT install_extra 540 541# extra libraries kept in other source areas 542install_extra: 543 @cd ../cmd/sgs; pwd; $(MAKE) install_lib 544 @pwd 545 546clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) 547 548install_h check: $(HDRSUBDIRS:%=%-nodepend) 549 550_msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc 551 552_dc: $(DCSUBDIRS:%=%-nodepend) 553 554# 555# Library interdependencies are called out explicitly here 556# 557auditd_plugins: libbsm libnsl libsecdb 558gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 559libadt_jni: libbsm 560$(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n 561libast: libsocket 562libadutils: libldap5 libresolv libsocket libnsl 563nsswitch: libadutils libidmap 564libbsm: libtsol 565libcmd: libsum libast libsocket libnsl 566libcmdutils: libavl 567libcontract: libnvpair 568libdevid: libdevinfo 569libdevinfo: libnvpair libsec 570libdhcpagent: libsocket libdhcputil libuuid libdlpi libcontract 571libdhcpsvc: libinetutil 572libdhcputil: libnsl libgen libinetutil libdlpi 573libdladm: libdevinfo libinetutil libsocket libscf librcm libnvpair \ 574 libexacct libnsl libkstat libcurses 575libdll: libast 576libdlpi: libinetutil libdladm 577libdscfg: libnsctl libunistat libsocket libnsl 578libdtrace: libproc libgen libctf 579libdtrace_jni: libuutil libdtrace 580libefi: libuuid 581libfstyp: libnvpair 582libelfsign: libcryptoutil libkmf 583libidmap: libadutils libldap5 libavl libsldap 584libinetcfg: libnsl libsocket libdlpi 585libiscsit: libc libnvpair libstmf libuuid libnsl 586libkmf: libcryptoutil pkcs11 587libnsl: libmd5 libscf 588libmapid: libresolv 589libnwam: libdoor 590librdc: libsocket libnsl libnsctl libunistat libdscfg 591libuuid: libdlpi 592libinetutil: libsocket 593libinstzones: libzonecfg libcontract 594libpkg: libwanboot libscf libadm 595libsecdb: libnsl 596libsasl: libgss libsocket pkcs11 libmd 597sasl_plugins: pkcs11 libgss libsocket libsasl 598libsctp: libsocket 599libshell: libast libcmd libdll libsocket libsecdb 600libsip: libmd5 601libsmbfs: libsocket libnsl libkrb5 602libsocket: libnsl 603libstmfproxy: libstmf libsocket libnsl libpthread 604libsum: libast 605libldap5: libsasl libsocket libnsl libmd 606libsldap: libldap5 libtsol libnsl libc libscf libresolv 607libpool: libnvpair libexacct 608libpp: libast 609libzonecfg: libc libsocket libnsl libuuid libnvpair libsysevent libsec \ 610 libbrand libpool libscf 611libproc: ../cmd/sgs/librtld_db ../cmd/sgs/libelf libctf 612libproject: libpool libproc libsecdb 613libtsnet: libnsl libtsol libsecdb 614libwrap: libnsl libsocket 615libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ 616 libdhcputil 617libwanbootutil: libnsl 618pam_modules: libproject passwdutil smbsrv 619libscf: libuutil libmd libgen libsmbios 620libinetsvc: libscf 621librestart: libuutil libscf 622../cmd/sgs/libdl: ../cmd/sgs/libconv 623../cmd/sgs/libelf: ../cmd/sgs/libconv 624pkcs11: libcryptoutil 625print: libldap5 626udapl/udapl_tavor: udapl/libdat 627libzfs: libdevinfo libdevid libgen libnvpair libuutil libiscsitgt \ 628 libavl libefi libidmap 629libzfs_jni: libdiskmgt libnvpair libzfs 630libzpool: libavl libumem libnvpair 631libsec: libavl libidmap 632brand: libc libsocket 633libshare: libscf libzfs libuuid libfsmgt libsecdb libumem libsmbfs 634libexacct/demo: libexacct libproject libsocket libnsl 635libtsalarm: libpcp 636smbsrv: libsocket libnsl libmd libxnet libpthread librt \ 637 libshare libidmap pkcs11 libsqlite 638libvscan: libscf 639scsi: libnvpair 640mpapi: libpthread libdevinfo libsysevent libnvpair 641libgrubmgmt: libdevinfo libzfs libfstyp 642pyzfs: libnvpair libsec libidmap libzfs 643libreparse: libnvpair 644 645# 646# The reason this rule checks for the existence of the 647# Makefile is that some of the directories do not exist 648# in certain situations (e.g., exportable source builds, 649# OpenSolaris). 650# 651$(SUBDIRS): FRC 652 @if [ -f $@/Makefile ]; then \ 653 cd $@; pwd; $(MAKE) $(TARGET); \ 654 else \ 655 true; \ 656 fi 657 658$(SUBDIRS:%=%-nodepend): 659 @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ 660 cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ 661 else \ 662 true; \ 663 fi 664 665FRC: 666