xref: /titanic_51/usr/src/cmd/fs.d/nfs/svc/nfs-server (revision 65f385795231fc5a4e021acc26afd73365a3b5ab)
1#!/sbin/sh
2#
3# CDDL HEADER START
4#
5# The contents of this file are subject to the terms of the
6# Common Development and Distribution License (the "License").
7# You may not use this file except in compliance with the License.
8#
9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10# or http://www.opensolaris.org/os/licensing.
11# See the License for the specific language governing permissions
12# and limitations under the License.
13#
14# When distributing Covered Code, include this CDDL HEADER in each
15# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16# If applicable, add the following below this CDDL HEADER, with the
17# fields enclosed by brackets "[]" replaced with your own identifying
18# information: Portions Copyright [yyyy] [name of copyright owner]
19#
20# CDDL HEADER END
21#
22#
23# Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
24#
25
26# Start/stop processes required for server NFS
27
28. /lib/svc/share/smf_include.sh
29. /lib/svc/share/ipf_include.sh
30zone=`smf_zonename`
31
32#
33# Handling a corner case here. If we were in offline state due to an
34# unsatisfied dependency, the ipf_method process wouldn't have generated
35# the ipfilter configuration. When we transition to online because the
36# dependency is satisfied, the start method will have to generate the
37# ipfilter configuration. To avoid all possible deadlock scenarios,
38# we restart ipfilter which will regenerate the ipfilter configuration
39# for the entire system.
40#
41# The ipf_method process signals that it didn't generate ipf rules by
42# removing the service's ipf file. Thus we only restart network/ipfilter
43# when the file is missing.
44#
45configure_ipfilter()
46{
47	ipfile=`fmri_to_file $SMF_FMRI $IPF_SUFFIX`
48	[ -f "$ipfile" ] && return 0
49
50        #
51	# Nothing to do if:
52        # - ipfilter isn't online
53	# - global policy is 'custom'
54	# - service's policy is 'use_global'
55        #
56        service_check_state $IPF_FMRI $SMF_ONLINE || return 0
57        [ "`get_global_def_policy`" = "custom" ] && return 0
58	[ "`get_policy $SMF_FMRI`" = "use_global" ] && return 0
59
60	svcadm restart $IPF_FMRI
61}
62
63case "$1" in
64'start')
65	# The NFS server is not supported in a local zone
66	if smf_is_nonglobalzone; then
67		/usr/sbin/svcadm disable -t svc:/network/nfs/server
68		echo "The NFS server is not supported in a local zone"
69		sleep 5 &
70		exit $SMF_EXIT_OK
71	fi
72
73	# Share all file systems enabled for sharing. sharemgr understands
74	# regular shares and ZFS shares and will handle both. Technically,
75	# the shares would have been started long before getting here since
76	# nfsd has a dependency on them.
77
78	startnfsd=0
79
80	# restart stopped shares from the repository
81	/usr/sbin/sharemgr start -P nfs -a
82
83	# Start up mountd and nfsd if anything is exported.
84
85	if /usr/bin/grep -s nfs /etc/dfs/sharetab >/dev/null; then
86		startnfsd=1
87	fi
88
89	# If auto-enable behavior is disabled, always start nfsd
90
91	if [ `svcprop -p application/auto_enable nfs/server` = "false" ]; then
92		startnfsd=1
93	fi
94
95	# Options for nfsd are now set in SMF
96	if [ $startnfsd -ne 0 ]; then
97		/usr/lib/nfs/mountd
98		rc=$?
99		if [ $rc != 0 ]; then
100			/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
101			echo "$0: mountd failed with $rc"
102			sleep 5 &
103			exit $SMF_EXIT_ERR_FATAL
104		fi
105
106		/usr/lib/nfs/nfsd
107		rc=$?
108		if [ $rc != 0 ]; then
109			/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
110			echo "$0: nfsd failed with $rc"
111			sleep 5 &
112			exit $SMF_EXIT_ERR_FATAL
113		fi
114
115		configure_ipfilter
116	else
117		/usr/sbin/svcadm disable -t svc:/network/nfs/server
118		echo "No NFS filesystems are shared"
119		sleep 5 &
120	fi
121
122	;;
123
124'refresh')
125	/usr/sbin/sharemgr start -P nfs -a
126	;;
127
128'stop')
129	/usr/bin/pkill -x -u 0,1 -z $zone '(nfsd|mountd)'
130
131	# Unshare all shared file systems using NFS
132
133	/usr/sbin/sharemgr stop -P nfs -a
134
135	#
136	# Wait up to 10 seconds for nfslogd to gracefully handle SIGHUP
137	#
138	/usr/bin/pkill -HUP -x -u 0 -z $zone nfslogd
139	wtime=10
140
141	while [ $wtime -gt 0 ]; do
142		/usr/bin/pgrep -x -u 0 -z $zone nfslogd >/dev/null || break
143		wtime=`expr $wtime - 1`
144		sleep 1
145	done
146
147	#
148	# Kill nfslogd more forcefully if it did not shutdown during
149	# the grace period
150	#
151	if [ $wtime -eq 0 ]; then
152		/usr/bin/pkill -TERM -x -u 0 -z $zone nfslogd
153	fi
154
155	# Kill any processes left in service contract
156	smf_kill_contract $2 TERM 1
157	[ $? -ne 0 ] && exit 1
158	;;
159
160'ipfilter')
161	#
162	# NFS related services are RPC. nfs/server has nfsd which has
163	# well-defined port number but mountd is an RPC daemon.
164	#
165	# Essentially, we generate rules for the following "services"
166	#  - nfs/server which has nfsd and mountd
167	#  - nfs/rquota
168	#
169	# The following services are enabled for both nfs client and
170	# server so we'll treat them as client services and simply
171	# allow incoming traffic.
172	#  - nfs/status
173	#  - nfs/nlockmgr
174	#  - nfs/cbd
175	#
176	NFS_FMRI="svc:/network/nfs/server:default"
177	RQUOTA_FMRI="svc:/network/nfs/rquota:default"
178	FMRI=$2
179
180	file=`fmri_to_file $FMRI $IPF_SUFFIX`
181	echo "# $FMRI" >$file
182	policy=`get_policy $NFS_FMRI`
183	ip="any"
184
185	#
186	# nfs/server configuration is processed in the start method.
187	#
188	if [ "$FMRI" = "$NFS_FMRI" ]; then
189		service_check_state $FMRI $SMF_ONLINE
190		if [ $? -ne 0 ]; then
191			rm  $file
192			exit $SMF_EXIT_OK
193		fi
194
195		nfs_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI 2>/dev/null`
196		tport=`$SERVINFO -p -t -s $nfs_name 2>/dev/null`
197		if [ -n "$tport" ]; then
198			generate_rules $FMRI $policy "tcp" $ip $tport $file
199		fi
200
201		uport=`$SERVINFO -p -u -s $nfs_name 2>/dev/null`
202		if [ -n "$uport" ]; then
203			generate_rules $FMRI $policy "udp" $ip $uport $file
204		fi
205
206		tports=`$SERVINFO -R -p -t -s "mountd" 2>/dev/null`
207		if [ -n "$tports" ]; then
208			for tport in $tports; do
209				generate_rules $FMRI $policy "tcp" $ip \
210				    $tport $file
211			done
212		fi
213
214		uports=`$SERVINFO -R -p -u -s "mountd" 2>/dev/null`
215		if [ -n "$uports" ]; then
216			for uport in $uports; do
217				generate_rules $FMRI $policy "udp" $ip \
218				    $uport $file
219			done
220		fi
221
222	elif [ "$FMRI" = "$RQUOTA_FMRI" ]; then
223		iana_name=`svcprop -p inetd/name $FMRI`
224
225		tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
226		if [ -n "$tports" ]; then
227			for tport in $tports; do
228				generate_rules $NFS_FMRI $policy "tcp" \
229				    $ip $tport $file
230			done
231		fi
232
233		uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
234		if [ -n "$uports" ]; then
235			for uport in $uports; do
236				generate_rules $NFS_FMRI $policy "udp" \
237				    $ip $uport $file
238			done
239		fi
240	else
241		#
242		# Handle the client services here
243		#
244		restarter=`svcprop -p general/restarter $FMRI 2>/dev/null`
245		if [ "$restarter" = "$INETDFMRI" ]; then
246			iana_name=`svcprop -p inetd/name $FMRI`
247			isrpc=`svcprop -p inetd/isrpc $FMRI`
248		else
249			iana_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI`
250			isrpc=`svcprop -p $FW_CONTEXT_PG/isrpc $FMRI`
251		fi
252
253		if [ "$isrpc" = "true" ]; then
254			tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
255			uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
256		else
257			tports=`$SERVINFO -p -t -s $iana_name 2>/dev/null`
258			uports=`$SERVINFO -p -u -s $iana_name 2>/dev/null`
259		fi
260
261		if [ -n "$tports" ]; then
262			for tport in $tports; do
263				echo "pass in log quick proto tcp from any" \
264				    "to any port = ${tport} flags S " \
265				    "keep state" >>${file}
266			done
267		fi
268
269		if [ -n "$uports" ]; then
270			for uport in $uports; do
271				echo "pass in log quick proto udp from any" \
272				    "to any port = ${uport}" >>${file}
273			done
274		fi
275	fi
276
277	;;
278
279*)
280	echo "Usage: $0 { start | stop | refresh }"
281	exit 1
282	;;
283esac
284exit $SMF_EXIT_OK
285