xref: /titanic_51/usr/src/Makefile.master (revision 78b2cb9a814f49b9599bf830034a12338259e0c9) 
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21
22#
23# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28
29#
30# Makefile.master, global definitions for system source
31#
32ROOT=		/proto
33
34# Historically, ON builds were always done with root permissions, and the
35# owner/group information was duplicated in the Makefiles and the packaging
36# data and kept in sync by manual intervention.  This is no longer true.
37# The only source of this information is packaging.  The proto area ($ROOT)
38# does not have definitive onwer/group information, and no Makefile should
39# attempt to set this.  CH once toggled operations restricted to root.  It
40# is now just set to `#'.
41#
42# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all
43# be stripped completely from the source base.  They are kept for now until
44# on10-based projects can merge and transition away from them.
45#
46# RELEASE_BUILD should be cleared for final release builds. This is completely
47# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies.
48#
49# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls
50# identification strings. Enabling RELEASE_BUILD automatically enables
51# INTERNAL_RELEASE_BUILD.
52#
53# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that
54# can be released for export under a binary license.  It is orthogonal to
55# the other *RELEASE_BUILD settings.  ("#" means do an export release
56# build, "" means do a normal build.)
57#
58# CLOSED_BUILD controls whether we try to build files under
59# usr/closed.  ("" means to build closed code, "#" means don't try to
60# build it.)  Skipping the closed code implies doing an export release
61# build.
62#
63# STRIP_COMMENTS toggles comment section striping. Generally the same setting
64# as INTERNAL_RELEASE_BUILD.
65#
66# __GNUC toggles the building of ON components using gcc and related tools.
67# Normally set to `#', set it to `' to do gcc build.
68#
69# The declaration POUND_SIGN is always '#'. This is needed to get around the
70# make feature that '#' is always a comment delimiter, even when escaped or
71# quoted.  The only way of generating this is the :sh macro mechanism.  Note
72# however that in general :sh macros should be avoided in makefiles that are
73# widely included into other makefiles, as the resulting shell executions can
74# cause a noticable slowdown in build times.
75#
76POUND_SIGN:sh=				echo \\043
77CH=					$(POUND_SIGN)
78
79NOT_RELEASE_BUILD=
80INTERNAL_RELEASE_BUILD=			$(POUND_SIGN)
81RELEASE_BUILD=				$(POUND_SIGN)
82$(RELEASE_BUILD)NOT_RELEASE_BUILD=	$(POUND_SIGN)
83$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD=
84PATCH_BUILD=				$(POUND_SIGN)
85
86# If CLOSED_IS_PRESENT is not set, assume the closed tree is present.
87CLOSED_BUILD_1=	$(CLOSED_IS_PRESENT:yes=)
88CLOSED_BUILD=	$(CLOSED_BUILD_1:no=$(POUND_SIGN))
89
90EXPORT_RELEASE_BUILD=			$(POUND_SIGN)
91$(CLOSED_BUILD)EXPORT_RELEASE_BUILD=
92
93# SPARC_BLD is '#' for an Intel build.
94# INTEL_BLD is '#' for a Sparc build.
95SPARC_BLD_1=    $(MACH:i386=$(POUND_SIGN))
96SPARC_BLD=      $(SPARC_BLD_1:sparc=)
97INTEL_BLD_1=    $(MACH:sparc=$(POUND_SIGN))
98INTEL_BLD=      $(INTEL_BLD_1:i386=)
99
100STRIP_COMMENTS=	$(INTERNAL_RELEASE_BUILD)
101
102# set __GNUC= in the environment to build 32-bit with the gcc compiler.
103# The default is to use the Sun Studio compiler for all processor types.
104__GNUC=		$(POUND_SIGN)
105
106# set __GNUC64= in the environment to build 64-bit with the gcc compiler.
107# Inherit the __GNUC value by default, and if that is set to $(POUND_SIGN)
108# then this means use the Sun Studio compiler.
109__GNUC64=	$(__GNUC)
110
111# set __SSNEXT= in the enviroment to build with the 'next' release of
112# the Sun Studio compiler. This will cause command line options specific
113# to the 'next' version of the Sun Studio compiler to be used.
114__SSNEXT=	$(POUND_SIGN)
115
116# CLOSED is the root of the tree that contains source which isn't released
117# as open source
118CLOSED=		$(SRC)/../closed
119
120# BUILD_TOOLS is the root of all tools including compilers.
121# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld.
122
123BUILD_TOOLS=		/ws/onnv-tools
124ONBLD_TOOLS=		$(BUILD_TOOLS)/onbld
125
126JAVA_ROOT=	/usr/java
127
128SFW_ROOT=	/usr/sfw
129SFWINCDIR=	$(SFW_ROOT)/include
130SFWLIBDIR=	$(SFW_ROOT)/lib
131SFWLIBDIR64=	$(SFW_ROOT)/lib/$(MACH64)
132
133RPCGEN=		/usr/bin/rpcgen
134STABS=		$(ONBLD_TOOLS)/bin/$(MACH)/stabs
135ELFEXTRACT=	$(ONBLD_TOOLS)/bin/$(MACH)/elfextract
136MBH_PATCH=	$(ONBLD_TOOLS)/bin/$(MACH)/mbh_patch
137ECHO=		echo
138INS=		install
139TRUE=		true
140SYMLINK=	/usr/bin/ln -s
141LN=		/usr/bin/ln
142CHMOD=		/usr/bin/chmod
143CHOWN=		$(TRUE)
144CHGRP=		$(TRUE)
145MV=		/usr/bin/mv -f
146RM=		/usr/bin/rm -f
147CUT=		/usr/bin/cut
148NM=		/usr/ccs/bin/nm
149DIFF=		/usr/bin/diff
150GREP=		/usr/bin/grep
151EGREP=		/usr/bin/egrep
152SED=		/usr/bin/sed
153NAWK=		/usr/bin/nawk
154CP=		/usr/bin/cp -f
155MCS=		/usr/ccs/bin/mcs
156CAT=            /usr/bin/cat
157ELFDUMP=	/usr/ccs/bin/elfdump
158M4=		/usr/ccs/bin/m4
159STRIP=		/usr/ccs/bin/strip
160LEX=		/usr/ccs/bin/lex
161YACC=		/usr/ccs/bin/yacc
162CPP=		/usr/lib/cpp
163JAVAC=		$(JAVA_ROOT)/bin/javac
164JAVAH=		$(JAVA_ROOT)/bin/javah
165JAVADOC=	$(JAVA_ROOT)/bin/javadoc
166RMIC=		$(JAVA_ROOT)/bin/rmic
167JAR=		$(JAVA_ROOT)/bin/jar
168CTFCONVERT=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert
169CTFMERGE=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge
170CTFSTABS=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs
171GENOFFSETS=	$(ONBLD_TOOLS)/bin/genoffsets
172CTFCVTPTBL=	$(ONBLD_TOOLS)/bin/ctfcvtptbl
173CTFFINDMOD=	$(ONBLD_TOOLS)/bin/ctffindmod
174XREF=		$(ONBLD_TOOLS)/bin/xref
175FIND=		/usr/bin/find
176PERL=		/usr/bin/perl
177SORT=		/usr/bin/sort
178TOUCH=		/usr/bin/touch
179WC=		/usr/bin/wc
180XARGS=		/usr/bin/xargs
181ELFSIGN=	/usr/bin/elfsign
182DTRACE=		/usr/sbin/dtrace
183CHECK_FNAMES=	$(ONBLD_TOOLS)/bin/check_fnames
184
185# Due to 6367203, objects built with gcc will fail the namespace checks.
186# Remove this override once the compiler bug is fixed.
187$(__GNUC)CHECK_FNAMES=	$(TRUE)
188
189FILEMODE=	644
190DIRMODE=	755
191
192# Note: owner and group for proto area objects is no longer set by
193# Makefiles at all.  These have no real effect and are kept here for
194# transition purposes.  They (along with CH, CHOWN, and CHGRP) should be
195# removed early in the s11 development cycle.
196OWNER=		root
197GROUP=		bin
198
199#
200# The version of the patch makeup table optimized for build-time use.  Used
201# during patch builds only.
202$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo
203
204# Declare that nothing should be built in parallel.
205# Individual Makefiles can use the .PARALLEL target to declare otherwise.
206.NO_PARALLEL:
207
208# For stylistic checks
209#
210# Note that the X and C checks are not used at this time and may need
211# modification when they are actually used.
212#
213CSTYLE=		cstyle
214CSTYLE_TAIL=
215HDRCHK=		hdrchk
216HDRCHK_TAIL=
217JSTYLE=		jstyle
218
219DOT_H_CHECK=	\
220	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \
221	$(HDRCHK) $< $(HDRCHK_TAIL)
222
223DOT_X_CHECK=	\
224	@$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \
225	$(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL)
226
227DOT_C_CHECK=	\
228	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL)
229
230MANIFEST_CHECK=	\
231	@$(ECHO) "checking $<"; \
232	SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \
233	$(SRC)/cmd/svc/svccfg/svccfg-native validate $<
234
235INS.file=	$(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $<
236INS.dir=	$(INS) -s -d -m $(DIRMODE) $@
237# installs and renames at once
238#
239INS.rename=	$(INS.file); $(MV) $(@D)/$(<F) $@
240
241# install a link
242INSLINKTARGET=	$<
243INS.link=	$(RM) $@; $(LN) $(INSLINKTARGET) $@
244
245# MACH must be set in the shell environment per uname -p on the build host
246# More specific architecture variables should be set in lower makefiles.
247#
248# MACH64 is derived from MACH, and BUILD64 is set to `#' for
249# architectures on which we do not build 64-bit versions.
250# (There are no such architectures at the moment.)
251#
252# Set BUILD64=# in the environment to disable 64-bit amd64
253# builds on i386 machines.
254
255MACH64_1=	$(MACH:sparc=sparcv9)
256MACH64=		$(MACH64_1:i386=amd64)
257
258MACH32_1=	$(MACH:sparc=sparcv7)
259MACH32=		$(MACH32_1:i386=i86)
260
261sparc_BUILD64=
262i386_BUILD64=
263BUILD64=	$($(MACH)_BUILD64)
264
265#
266# C compiler mode. Future compilers may change the default on us,
267# so force extended ANSI mode globally. Lower level makefiles can
268# override this by setting CCMODE.
269#
270CCMODE=			-Xa
271CCMODE64=		-Xa
272
273#
274# C compiler verbose mode. This is so we can enable it globally,
275# but turn it off in the lower level makefiles of things we cannot
276# (or aren't going to) fix.
277#
278CCVERBOSE=		-v
279
280# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings
281# from the compiler about places the -xarch=v9 may differ from -xarch=v9c.
282V9ABIWARN=
283
284# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register
285# symbols (used to detect conflicts between objects that use global registers)
286# we disable this now for safety, and because genunix doesn't link with
287# this feature (the v9 default) enabled.
288#
289# REGSYM is separate since the C++ driver syntax is different.
290CCREGSYM=		-Wc,-Qiselect-regsym=0
291CCCREGSYM=		-Qoption cg -Qiselect-regsym=0
292
293# Prevent the removal of static symbols by the SPARC code generator (cg).
294# The x86 code generator (ube) does not remove such symbols and as such
295# using this workaround is not applicable for x86.
296#
297CCSTATICSYM=		-Wc,-Qassembler-ounrefsym=0
298#
299# generate 32-bit addresses in the v9 kernel. Saves memory.
300CCABS32=		-Wc,-xcode=abs32
301
302# One optimization the compiler might perform is to turn this:
303#	#pragma weak foo
304#	extern int foo;
305#	if (&foo)
306#		foo = 5;
307# into
308#	foo = 5;
309# Since we do some of this (foo might be referenced in common kernel code
310# but provided only for some cpu modules or platforms), we disable this
311# optimization.
312#
313sparc_CCUNBOUND	= -Wd,-xsafe=unboundsym
314i386_CCUNBOUND	=
315CCUNBOUND	= $($(MACH)_CCUNBOUND)
316
317#
318# compiler '-xarch' flag. This is here to centralize it and make it
319# overridable for testing.
320sparc_XARCH=		-xarch=v8
321sparcv9_XARCH=		-xarch=v9
322i386_XARCH=
323amd64_XARCH=		-xarch=amd64 -Ui386 -U__i386
324
325# assembler '-xarch' flag.  Different from compiler '-xarch' flag.
326sparc_AS_XARCH=		-xarch=v8plus
327sparcv9_AS_XARCH=	-xarch=v9
328i386_AS_XARCH=
329amd64_AS_XARCH=		-xarch=amd64 -P -Ui386 -U__i386
330
331#
332# These flags define what we need to be 'standalone' i.e. -not- part
333# of the rather more cosy userland environment.  This basically means
334# the kernel.
335#
336# XX64	future versions of gcc will make -mcmodel=kernel imply -mno-red-zone
337#
338sparc_STAND_FLAGS=	-_gcc=-ffreestanding
339sparcv9_STAND_FLAGS=	-_gcc=-ffreestanding
340i386_STAND_FLAGS=	-_gcc=-ffreestanding
341amd64_STAND_FLAGS=	-Wu,-xmodel=kernel
342$(__SSNEXT)amd64_STAND_FLAGS=	-xmodel=kernel
343
344SAVEARGS=		-Wu,-save_args
345amd64_STAND_FLAGS	+= $(SAVEARGS)
346
347STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS)
348STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS)
349
350#
351# disable the incremental linker
352ILDOFF=			-xildoff
353#
354XDEPEND=		-xdepend
355XFFLAG=			-xF
356XESS=			-xs
357XSTRCONST=		-xstrconst
358
359#
360# turn warnings into errors (C)
361CERRWARN = -errtags=yes -errwarn=%all
362CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT
363CERRWARN += -erroff=E_STATEMENT_NOT_REACHED
364
365#
366# turn warnings into errors (C++)
367CCERRWARN=		-xwe
368
369# C99 mode
370C99_ENABLE=	-xc99=%all
371C99_DISABLE=	-xc99=%none
372C99MODE=	$(C99_DISABLE)
373C99LMODE=	$(C99MODE:-xc99%=-Xc99%)
374
375# In most places, assignments to these macros should be appended with +=
376# (CPPFLAGS.master allows values to be prepended to CPPFLAGS).
377sparc_CFLAGS=	$(sparc_XARCH) $(CCSTATICSYM)
378sparcv9_CFLAGS=	$(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM) \
379		$(CCSTATICSYM)
380i386_CFLAGS=	$(i386_XARCH)
381amd64_CFLAGS=	$(amd64_XARCH)
382
383sparc_ASFLAGS=	$(sparc_AS_XARCH)
384sparcv9_ASFLAGS=$(sparcv9_AS_XARCH)
385i386_ASFLAGS=	$(i386_AS_XARCH)
386amd64_ASFLAGS=	$(amd64_AS_XARCH)
387
388#
389sparc_COPTFLAG=		-xO3
390sparcv9_COPTFLAG=	-xO3
391i386_COPTFLAG=		-O
392amd64_COPTFLAG=		-xO3
393
394COPTFLAG= $($(MACH)_COPTFLAG)
395COPTFLAG64= $($(MACH64)_COPTFLAG)
396
397# When -g is used, the compiler globalizes static objects
398# (gives them a unique prefix). Disable that.
399CNOGLOBAL= -W0,-noglobal
400
401# Direct the Sun Studio compiler to use a static globalization prefix based on the
402# name of the module rather than something unique. Otherwise, objects
403# will not build deterministically, as subsequent compilations of identical
404# source will yeild objects that always look different.
405#
406# In the same spirit, this will also remove the date from the N_OPT stab.
407CGLOBALSTATIC= -W0,-xglobalstatic
408
409# Normally, gcc uses indirect DWARF strings to save space.  However,
410# this causes relocations that ctfconvert cannot handle.  Disable this.
411CDWARFSTR=	-_gcc=-fno-dwarf2-indirect-strings
412
413# Sometimes we want all symbols and types in debugging information even
414# if they aren't used.
415CALLSYMS=	-W0,-xdbggen=no%usedonly
416
417#
418# Default debug format for Sun Studio 11 is dwarf, so force it to
419# generate stabs.
420#
421DEBUGFORMAT=	-xdebugformat=stabs
422
423#
424# Flags used to build in debug mode for ctf generation.  Bugs in the Devpro
425# compilers currently prevent us from building with cc-emitted DWARF.
426#
427CTF_FLAGS_sparc	= -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
428CTF_FLAGS_i386	= -g $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
429CTF_FLAGS	= $(CTF_FLAGS_$(MACH)) $(DEBUGFORMAT)
430
431#
432# Flags used with genoffsets
433#
434GOFLAGS = -_noecho \
435	$(CALLSYMS) \
436	$(CDWARFSTR)
437
438OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
439	$(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS)
440
441OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
442	$(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS)
443
444#
445# tradeoff time for space (smaller is better)
446#
447sparc_SPACEFLAG		= -xspace -W0,-Lt
448sparcv9_SPACEFLAG	= -xspace -W0,-Lt
449i386_SPACEFLAG		= -xspace
450amd64_SPACEFLAG		=
451
452SPACEFLAG		= $($(MACH)_SPACEFLAG)
453SPACEFLAG64		= $($(MACH64)_SPACEFLAG)
454
455#
456# The Sun Studio 11 compiler has changed the behaviour of integer
457# wrap arounds and so a flag is needed to use the legacy behaviour
458# (without this flag panics/hangs could be exposed within the source).
459#
460sparc_IROPTFLAG		= -W2,-xwrap_int
461sparcv9_IROPTFLAG	= -W2,-xwrap_int
462i386_IROPTFLAG		=
463amd64_IROPTFLAG		=
464
465IROPTFLAG		= $($(MACH)_IROPTFLAG)
466IROPTFLAG64		= $($(MACH64)_IROPTFLAG)
467
468sparc_XREGSFLAG		= -xregs=no%appl
469sparcv9_XREGSFLAG	= -xregs=no%appl
470i386_XREGSFLAG		=
471amd64_XREGSFLAG		=
472
473XREGSFLAG		= $($(MACH)_XREGSFLAG)
474XREGSFLAG64		= $($(MACH64)_XREGSFLAG)
475
476CFLAGS=         $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \
477		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) $(IROPTFLAG) \
478		$(CGLOBALSTATIC)
479CFLAGS64=       $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \
480		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) $(IROPTFLAG64) \
481		$(CGLOBALSTATIC)
482#
483# Flags that are used to build parts of the code that are subsequently
484# run on the build machine (also known as the NATIVE_BUILD).
485#
486NATIVE_CFLAGS=	$(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \
487		$(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND) \
488		$(IROPTFLAG) $(CGLOBALSTATIC)
489
490DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\"	# For messaging.
491DTS_ERRNO=-D_TS_ERRNO
492CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \
493	$(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4)
494CPPFLAGS=	$(CPPFLAGS.master)
495AS_CPPFLAGS=	$(CPPFLAGS.master)
496JAVAFLAGS=	-deprecation
497
498#
499# For source message catalogue
500#
501.SUFFIXES: $(SUFFIXES) .i .po
502MSGROOT= $(ROOT)/catalog
503MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN)
504MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE)
505DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN)
506DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po)
507
508CLOBBERFILES += $(POFILE) $(POFILES)
509COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS)
510XGETTEXT= /usr/bin/xgettext
511XGETFLAGS= -c TRANSLATION_NOTE
512BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\
513	$(RM)	$@ ;\
514	sed "/^domain/d" < $(<F).po > $@ ;\
515	$(RM) $(<F).po $<.i
516#
517# This is overwritten by local Makefile when PROG is a list.
518#
519POFILE= $(PROG).po
520
521sparc_CCFLAGS=		-cg92 -compat=4 \
522			-Qoption ccfe -messages=no%anachronism \
523			$(CCERRWARN)
524sparcv9_CCFLAGS=	$(sparcv9_XARCH) -dalign -compat=5 \
525			-Qoption ccfe -messages=no%anachronism \
526			-Qoption ccfe -features=no%conststrings \
527			$(CCCREGSYM) \
528			$(CCERRWARN)
529i386_CCFLAGS=		-compat=4 \
530			-Qoption ccfe -messages=no%anachronism \
531			-Qoption ccfe -features=no%conststrings \
532			$(CCERRWARN)
533amd64_CCFLAGS=		$(amd64_XARCH) -compat=5 \
534			-Qoption ccfe -messages=no%anachronism \
535			-Qoption ccfe -features=no%conststrings \
536			$(CCERRWARN)
537
538sparc_CCOPTFLAG=	-O
539sparcv9_CCOPTFLAG=	-O
540i386_CCOPTFLAG=		-O
541amd64_CCOPTFLAG=	-O
542
543CCOPTFLAG=	$($(MACH)_CCOPTFLAG)
544CCOPTFLAG64=	$($(MACH64)_CCOPTFLAG)
545CCFLAGS=	$(CCOPTFLAG) $($(MACH)_CCFLAGS)
546CCFLAGS64=	$(CCOPTFLAG64) $($(MACH64)_CCFLAGS)
547
548#
549# Various mapfiles that are used throughout the build, and delivered to
550# /usr/lib/ld.
551#
552MAPFILE.NED_i386 =	$(SRC)/common/mapfiles/i386/map.noexdata
553MAPFILE.NED_sparc =
554MAPFILE.NED =		$(MAPFILE.NED_$(MACH))
555MAPFILE.PGA =		$(SRC)/common/mapfiles/$(MACH)/map.pagealign
556MAPFILE.NES =		$(SRC)/common/mapfiles/common/map.noexstk
557MAPFILE.FLT =		$(SRC)/common/mapfiles/common/map.filter
558MAPFILE.LEX =		$(SRC)/common/mapfiles/common/map.lex.yy
559
560#
561# Generated mapfiles that are compiler specific, and used throughout the
562# build.  These mapfiles are not delivered in /usr/lib/ld.
563#
564MAPFILE.NGB_sparc=	$(SRC)/common/mapfiles/gen/sparc_cc_map.noexeglobs
565$(__GNUC64)MAPFILE.NGB_sparc= \
566			$(SRC)/common/mapfiles/gen/sparc_gcc_map.noexeglobs
567MAPFILE.NGB_sparcv9=	$(SRC)/common/mapfiles/gen/sparcv9_cc_map.noexeglobs
568$(__GNUC64)MAPFILE.NGB_sparcv9= \
569			$(SRC)/common/mapfiles/gen/sparcv9_gcc_map.noexeglobs
570MAPFILE.NGB_i386=	$(SRC)/common/mapfiles/gen/i386_cc_map.noexeglobs
571$(__GNUC64)MAPFILE.NGB_i386= \
572			$(SRC)/common/mapfiles/gen/i386_gcc_map.noexeglobs
573MAPFILE.NGB_amd64=	$(SRC)/common/mapfiles/gen/amd64_cc_map.noexeglobs
574$(__GNUC64)MAPFILE.NGB_amd64= \
575			$(SRC)/common/mapfiles/gen/amd64_gcc_map.noexeglobs
576MAPFILE.NGB =		$(MAPFILE.NGB_$(MACH))
577
578#
579# A generic interface mapfile name, used by various dynamic objects to define
580# the interfaces and interposers the object must export.
581#
582MAPFILE.INT =		mapfile-intf
583
584#
585# LDLIBS32 can be set in the environment to override the following assignment.
586# LDLIBS64 can be set to override the assignment made in Makefile.master.64.
587# These environment settings make sure that no libraries are searched outside
588# of the local workspace proto area:
589#	LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib
590#	LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64
591#
592LDLIBS32 =	$(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3)
593LDLIBS.cmd = 	$(LDLIBS32)
594LDLIBS.lib =	$(LDLIBS32)
595#
596# Define compilation macros.
597#
598COMPILE.c=	$(CC) $(CFLAGS) $(CPPFLAGS) -c
599COMPILE64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) -c
600COMPILE.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) -c
601COMPILE64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) -c
602COMPILE.s=	$(AS) $(ASFLAGS) $(AS_CPPFLAGS)
603COMPILE64.s=	$(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS)
604COMPILE.d=	$(DTRACE) -G -32
605COMPILE64.d=	$(DTRACE) -G -64
606
607CLASSPATH=	.
608COMPILE.java=	$(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH)
609
610#
611# Link time macros
612#
613CCNEEDED		= -lC
614$(__GNUC)CCNEEDED	= -L$(SFWLIBDIR) -R$(SFWLIBDIR) -lstdc++ -lgcc_s
615
616LINK.c=		$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
617LINK64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS)
618NORUNPATH=	-norunpath -nolib
619LINK.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \
620		$(LDFLAGS) $(CCNEEDED)
621LINK64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \
622		$(LDFLAGS) $(CCNEEDED)
623
624#
625# lint macros
626#
627# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once
628# ON is built with a version of lint that has the fix for 4484186.
629#
630ALWAYS_LINT_DEFS =	-errtags=yes -s
631ALWAYS_LINT_DEFS +=	-erroff=E_PTRDIFF_OVERFLOW
632ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_NARROW_CONV
633ALWAYS_LINT_DEFS +=	-U__PRAGMA_REDEFINE_EXTNAME
634ALWAYS_LINT_DEFS +=	$(C99LMODE)
635ALWAYS_LINT_DEFS +=	-errsecurity=$(SECLEVEL)
636ALWAYS_LINT_DEFS +=	-erroff=E_SEC_CREAT_WITHOUT_EXCL
637ALWAYS_LINT_DEFS +=	-erroff=E_SEC_FORBIDDEN_WARN_CREAT
638# XX64 -- really only needed for amd64 lint
639ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_INT_TO_SMALL_INT
640ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_CONST_TO_SMALL_INT
641ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_TO_SMALL_INT
642ALWAYS_LINT_DEFS +=	-erroff=E_CAST_TO_PTR_FROM_INT
643ALWAYS_LINT_DEFS +=	-erroff=E_COMP_INT_WITH_LARGE_INT
644ALWAYS_LINT_DEFS +=	-erroff=E_INTEGRAL_CONST_EXP_EXPECTED
645ALWAYS_LINT_DEFS +=	-erroff=E_PASS_INT_TO_SMALL_INT
646ALWAYS_LINT_DEFS +=	-erroff=E_PTR_CONV_LOSES_BITS
647
648SECLEVEL=	core
649LINT.c=		$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
650LINT64.c=	$(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
651LINT.s=		$(LINT.c)
652
653# For some future builds, NATIVE_MACH and MACH might be different.
654# Therefore, NATIVE_MACH needs to be redefined in the
655# environment as `uname -p` to override this macro.
656#
657# For now at least, we cross-compile amd64 on i386 machines.
658NATIVE_MACH=	$(MACH:amd64=i386)
659
660# Define native compilation macros
661#
662
663# Base directory where compilers are loaded.
664# Defined here so it can be overridden by developer.
665#
666SPRO_ROOT=		$(BUILD_TOOLS)/SUNWspro
667SPRO_VROOT=		$(SPRO_ROOT)/SS11
668GNU_ROOT=		$(SFW_ROOT)
669
670# Specify platform compiler versions for languages
671# that we use (currently only c and c++).
672#
673sparc_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
674$(__GNUC)sparc_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
675sparc_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
676$(__GNUC)sparc_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
677sparc_CPP=		/usr/ccs/lib/cpp
678sparc_AS=		/usr/ccs/bin/as -xregsym=no
679sparc_LD=		/usr/ccs/bin/ld
680sparc_LINT=		$(SPRO_VROOT)/bin/lint
681
682sparcv9_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
683$(__GNUC64)sparcv9_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
684sparcv9_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
685$(__GNUC64)sparcv9_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
686sparcv9_CPP=		/usr/ccs/lib/cpp
687sparcv9_AS=		/usr/ccs/bin/as -xregsym=no
688sparcv9_LD=		/usr/ccs/bin/ld
689sparcv9_LINT=		$(SPRO_VROOT)/bin/lint
690
691# We compile 32-bit objects with cc by default
692i386_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
693$(__GNUC)i386_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
694i386_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
695$(__GNUC)i386_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
696i386_CPP=		/usr/ccs/lib/cpp
697i386_AS=		/usr/ccs/bin/as
698$(__GNUC)i386_AS=	$(ONBLD_TOOLS)/bin/$(MACH)/aw
699i386_LD=		/usr/ccs/bin/ld
700i386_LINT=		$(SPRO_VROOT)/bin/lint
701
702# We compile 64-bit objects with gcc
703amd64_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
704$(__GNUC64)amd64_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
705amd64_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
706$(__GNUC64)amd64_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
707amd64_CPP=		/usr/ccs/lib/cpp
708amd64_AS=		$(ONBLD_TOOLS)/bin/$(MACH)/aw
709amd64_LD=		/usr/ccs/bin/ld
710amd64_LINT=		$(SPRO_VROOT)/bin/lint
711
712NATIVECC=		$($(NATIVE_MACH)_CC)
713NATIVECCC=		$($(NATIVE_MACH)_CCC)
714NATIVECPP=		$($(NATIVE_MACH)_CPP)
715NATIVEAS=		$($(NATIVE_MACH)_AS)
716NATIVELD=		$($(NATIVE_MACH)_LD)
717NATIVELINT=		$($(NATIVE_MACH)_LINT)
718
719#
720# Makefile.master.64 overrides these settings
721#
722CC=			$(NATIVECC)
723CCC=			$(NATIVECCC)
724CPP=			$(NATIVECPP)
725AS=			$(NATIVEAS)
726LD=			$(NATIVELD)
727LINT=			$(NATIVELINT)
728
729# The real compilers used for this build
730CW_CC_CMD=		$(CC) -_compiler
731CW_CCC_CMD=		$(CCC) -_compiler
732REAL_CC=		$(CW_CC_CMD:sh)
733REAL_CCC=		$(CW_CCC_CMD:sh)
734
735# Pass -Y flag to cpp (method of which is release-dependent)
736CCYFLAG=		-Y I,
737
738BDIRECT=	-Bdirect
739BDYNAMIC=	-Bdynamic
740BLOCAL=		-Blocal
741BNODIRECT=	-Bnodirect
742BREDUCE=	-Breduce
743BSTATIC=	-Bstatic
744
745ZCOMBRELOC=	-zcombreloc
746ZDEFS=		-zdefs
747ZDIRECT=	-zdirect
748ZIGNORE=	-zignore
749ZINITFIRST=	-zinitfirst
750ZINTERPOSE=	-zinterpose
751ZLAZYLOAD=	-zlazyload
752ZLOADFLTR=	-zloadfltr
753ZMULDEFS=	-zmuldefs
754ZNODEFAULTLIB=	-znodefaultlib
755ZNODEFS=	-znodefs
756ZNODELETE=	-znodelete
757ZNODLOPEN=	-znodlopen
758ZNODUMP=	-znodump
759ZNOLAZYLOAD=	-znolazyload
760ZNORELOC=	-znoreloc
761ZNOVERSION=	-znoversion
762ZREDLOCSYM=	-zredlocsym
763ZTEXT=		-ztext
764ZVERBOSE=	-zverbose
765
766GSHARED=	-G
767CCMT=		-mt
768
769# Handle different PIC models on different ISAs
770# (May be overridden by lower-level Makefiles)
771
772sparc_C_PICFLAGS =	-K pic
773sparcv9_C_PICFLAGS =	-K pic
774i386_C_PICFLAGS =	-K pic
775amd64_C_PICFLAGS =	-K pic
776C_PICFLAGS =		$($(MACH)_C_PICFLAGS)
777C_PICFLAGS64 =		$($(MACH64)_C_PICFLAGS)
778
779sparc_C_BIGPICFLAGS =	-K PIC
780sparcv9_C_BIGPICFLAGS =	-K PIC
781i386_C_BIGPICFLAGS =	-K PIC
782amd64_C_BIGPICFLAGS =	-K PIC
783C_BIGPICFLAGS =		$($(MACH)_C_BIGPICFLAGS)
784C_BIGPICFLAGS64 =	$($(MACH64)_C_BIGPICFLAGS)
785
786# CC requires there to be no space between '-K' and 'pic' or 'PIC'.
787sparc_CC_PICFLAGS =	-Kpic
788sparcv9_CC_PICFLAGS =	-KPIC
789i386_CC_PICFLAGS = 	-Kpic
790amd64_CC_PICFLAGS = 	-Kpic
791CC_PICFLAGS =		$($(MACH)_CC_PICFLAGS)
792CC_PICFLAGS64 =		$($(MACH64)_CC_PICFLAGS)
793
794AS_PICFLAGS=		$(C_PICFLAGS)
795AS_BIGPICFLAGS=		$(C_BIGPICFLAGS)
796
797#
798# Default label for CTF sections
799#
800CTFCVTFLAGS=		-i -L VERSION
801
802#
803# Override to pass module-specific flags to ctfmerge.  Currently used
804# only by krtld to turn on fuzzy matching.
805#
806CTFMRGFLAGS=
807
808CTFCONVERT_O		= $(CTFCONVERT) $(CTFCVTFLAGS) $@
809
810ELFSIGN_O=	$(TRUE)
811ELFSIGN_CRYPTO=	$(ELFSIGN_O)
812ELFSIGN_OBJECT=	$(ELFSIGN_O)
813ELFSIGN_CRYPTO_LIMITED=	$(ELFSIGN_O)
814$(EXPORT_RELEASE_BUILD)ELFSIGN_O =	$(ELFSIGN)
815$(EXPORT_RELEASE_BUILD)ELFSIGN_CFNAME =	SUNWosnetCF
816$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY =	\
817			$(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_CFNAME)
818$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT=	\
819			$(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_CFNAME)
820$(EXPORT_RELEASE_BUILD)ELFSIGN_CLNAME =	SUNWosnetCFLimited
821$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY_LIMITED =	\
822			$(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_CLNAME)
823$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT_LIMITED=	\
824			$(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_CLNAME)
825$(EXPORT_RELEASE_BUILD)ELFSIGN_SENAME =	SUNWosnetSE
826$(EXPORT_RELEASE_BUILD)ELFSIGN_SEKEY =	\
827			$(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_SENAME)
828$(EXPORT_RELEASE_BUILD)ELFSIGN_SECERT=	\
829			$(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_SENAME)
830$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO=	$(ELFSIGN_O) sign \
831			$(ELFSIGN_FORMAT_OPTION) \
832			-k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@
833$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO_LIMITED=	$(ELFSIGN_O) sign \
834			$(ELFSIGN_FORMAT_OPTION) \
835			-k $(ELFSIGN_KEY_LIMITED) -c $(ELFSIGN_CERT_LIMITED) \
836			-e $@
837$(EXPORT_RELEASE_BUILD)ELFSIGN_OBJECT=	$(ELFSIGN_O) sign \
838			$(ELFSIGN_FORMAT_OPTION) \
839			-k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@
840
841# Rules (normally from make.rules) and macros which are used for post
842# processing files. Normally, these do stripping of the comment section
843# automatically.
844#    RELEASE_CM:	Should be editted to reflect the release.
845#    POST_PROCESS_O:	Post-processing for `.o' files.
846#    POST_PROCESS_A:	Post-processing for `.a' files (currently null).
847#    POST_PROCESS_SO:	Post-processing for `.so' files.
848#    POST_PROCESS:	Post-processing for executable files (no suffix).
849# Note that these macros are not completely generalized as they are to be
850# used with the file name to be processed following.
851#
852# It is left as an exercise to Release Engineering to embellish the generation
853# of the release comment string.
854#
855#	If this is a standard development build:
856#		compress the comment section (mcs -c)
857#		add the standard comment (mcs -a $(RELEASE_CM))
858#		add the development specific comment (mcs -a $(DEV_CM))
859#
860#	If this is an installation build:
861#		delete the comment section (mcs -d)
862#		add the standard comment (mcs -a $(RELEASE_CM))
863#		add the development specific comment (mcs -a $(DEV_CM))
864#
865#	If this is an release build:
866#		delete the comment section (mcs -d)
867#		add the standard comment (mcs -a $(RELEASE_CM))
868#
869#	The ONVERS macro sets the default value for the VERSION string
870#	within pkginfo.
871#
872# The following list of macros are used in the definition of RELEASE_CM
873# which is used to label all binaries in the build:
874#
875# 	RELEASE		Specific release of the build, eg: 5.2
876#	VERSION		Version of the build (alpha, beta, Generic)
877#	PATCHID		If this is a patch this value should contain
878#			the patchid value (eg: "Generic 100832-01"), otherwise
879#			it will be set to $(VERSION)
880#	RELEASE_DATE	Date of the Release Build
881#	PATCH_DATE	Date the patch was created, if this is blank it
882#			will default to the RELEASE_DATE
883#
884ONVERS=		"11.11"
885RELEASE=	5.11
886VERSION=	SunOS Development
887PATCHID=	$(VERSION)
888RELEASE_DATE=	October 2007
889PATCH_DATE=	$(RELEASE_DATE)
890RELEASE_CM=	"@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)"
891DEV_CM=		"@($(POUND_SIGN))SunOS Internal Development: \
892`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"
893
894PROCESS_COMMENT=		   @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM)
895$(STRIP_COMMENTS)PROCESS_COMMENT=  @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM)
896$(RELEASE_BUILD)PROCESS_COMMENT=   @?${MCS} -d -a $(RELEASE_CM)
897
898STRIP_STABS=			   :
899$(RELEASE_BUILD)STRIP_STABS=	   $(STRIP) -x $@
900
901POST_PROCESS_O=		$(PROCESS_COMMENT) $@
902POST_PROCESS_A=
903POST_PROCESS_SO=	$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
904			$(ELFSIGN_OBJECT)
905POST_PROCESS=		$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
906			$(ELFSIGN_OBJECT)
907
908#
909# The PKGDEFS macro points to the source directory containing the majority
910# of ON's package definitions plus Makefiles with general package creation
911# rules.
912#
913# PKGARCHIVE specifies the default location where packages should be
914# placed if built.
915#
916PKGDEFS=$(SRC)/pkgdefs
917$(RELEASE_BUILD)PKGARCHIVESUFFIX=	-nd
918PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX)
919
920#	Default build rules which perform comment section post-processing.
921#
922.c:
923	$(LINK.c) -o $@ $< $(LDLIBS)
924	$(POST_PROCESS)
925.c.o:
926	$(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK)
927	$(POST_PROCESS_O)
928.c.a:
929	$(COMPILE.c) -o $% $<
930	$(PROCESS_COMMENT) $%
931	$(AR) $(ARFLAGS) $@ $%
932	$(RM) $%
933.s.o:
934	$(COMPILE.s) -o $@ $<
935	$(POST_PROCESS_O)
936.s.a:
937	$(COMPILE.s) -o $% $<
938	$(PROCESS_COMMENT) $%
939	$(AR) $(ARFLAGS) $@ $%
940	$(RM) $%
941.cc:
942	$(LINK.cc) -o $@ $< $(LDLIBS)
943	$(POST_PROCESS)
944.cc.o:
945	$(COMPILE.cc) $(OUTPUT_OPTION) $<
946	$(POST_PROCESS_O)
947.cc.a:
948	$(COMPILE.cc) -o $% $<
949	$(AR) $(ARFLAGS) $@ $%
950	$(PROCESS_COMMENT) $%
951	$(RM) $%
952.y:
953	$(YACC.y) $<
954	$(LINK.c) -o $@ y.tab.c $(LDLIBS)
955	$(POST_PROCESS)
956	$(RM) y.tab.c
957.y.o:
958	$(YACC.y) $<
959	$(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK)
960	$(POST_PROCESS_O)
961	$(RM) y.tab.c
962.l:
963	$(RM) $*.c
964	$(LEX.l) $< > $*.c
965	$(LINK.c) -o $@ $*.c -ll $(LDLIBS)
966	$(POST_PROCESS)
967	$(RM) $*.c
968.l.o:
969	$(RM) $*.c
970	$(LEX.l) $< > $*.c
971	$(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK)
972	$(POST_PROCESS_O)
973	$(RM) $*.c
974
975.java.class:
976	$(COMPILE.java) $<
977
978#
979# Rules to create message catalogue files from .sh, .ksh, .c, .y, and .l
980# files.  For .sh and .ksh files, we extract all gettext strings with
981# sed(1) (being careful to permit multiple gettext strings on the same
982# line), weed out the dups, and build the catalogue with awk(1).
983#
984
985.sh.po:
986	$(SED) -n -e ":a" 					\
987		  -e "h" 					\
988		  -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p"	\
989		  -e "x"					\
990		  -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/"	\
991		  -e "t a"					\
992	       $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@
993
994.ksh.po:
995	$(SED) -n -e ":a" 					\
996		  -e "h" 					\
997		  -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p"	\
998		  -e "x"					\
999		  -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/"	\
1000		  -e "t a"					\
1001	       $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@
1002
1003#
1004# When using xgettext, we want messages to go to the default domain,
1005# rather than the specified one.  This special version of the
1006# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN,
1007# causing xgettext to put all messages into the default domain.
1008#
1009CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN)
1010
1011.c.i:
1012	$(CPPFORPO) $< > $@
1013
1014.h.i:
1015	$(CPPFORPO) $< > $@
1016
1017.y.i:
1018	$(YACC) -d $<
1019	$(CPPFORPO) y.tab.c  > $@
1020	$(RM) y.tab.c
1021
1022.l.i:
1023	$(LEX) $<
1024	$(CPPFORPO) lex.yy.c  > $@
1025	$(RM) lex.yy.c
1026
1027.c.po:
1028	$(CPPFORPO) $< > $<.i
1029	$(BUILD.po)
1030
1031.y.po:
1032	$(YACC) -d $<
1033	$(CPPFORPO) y.tab.c  > $<.i
1034	$(BUILD.po)
1035	$(RM) y.tab.c
1036
1037.l.po:
1038	$(LEX) $<
1039	$(CPPFORPO) lex.yy.c  > $<.i
1040	$(BUILD.po)
1041	$(RM) lex.yy.c
1042
1043#
1044# Rules to perform stylistic checks
1045#
1046.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk
1047
1048.h.check:
1049	$(DOT_H_CHECK)
1050
1051.x.check:
1052	$(DOT_X_CHECK)
1053
1054.xml.xmlchk:
1055	$(MANIFEST_CHECK)
1056
1057#
1058# Rules to process ONC+ Source partial files
1059#
1060%_onc_plus:	%
1061	@$(ECHO) "extracting code from $< ... "
1062	sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $<  > $@
1063
1064#
1065# Include rules to render automated sccs get rules "safe".
1066#
1067include $(SRC)/Makefile.noget
1068