1 /****************************************************************************** 2 * 3 * Name: acmacros.h - C macros for the entire subsystem. 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2011, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACMACROS_H__ 45 #define __ACMACROS_H__ 46 47 48 /* 49 * Extract data using a pointer. Any more than a byte and we 50 * get into potential aligment issues -- see the STORE macros below. 51 * Use with care. 52 */ 53 #define ACPI_GET8(ptr) *ACPI_CAST_PTR (UINT8, ptr) 54 #define ACPI_GET16(ptr) *ACPI_CAST_PTR (UINT16, ptr) 55 #define ACPI_GET32(ptr) *ACPI_CAST_PTR (UINT32, ptr) 56 #define ACPI_GET64(ptr) *ACPI_CAST_PTR (UINT64, ptr) 57 #define ACPI_SET8(ptr) *ACPI_CAST_PTR (UINT8, ptr) 58 #define ACPI_SET16(ptr) *ACPI_CAST_PTR (UINT16, ptr) 59 #define ACPI_SET32(ptr) *ACPI_CAST_PTR (UINT32, ptr) 60 #define ACPI_SET64(ptr) *ACPI_CAST_PTR (UINT64, ptr) 61 62 /* 63 * printf() format helpers 64 */ 65 66 /* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */ 67 68 #define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i) 69 70 #if ACPI_MACHINE_WIDTH == 64 71 #define ACPI_FORMAT_NATIVE_UINT(i) ACPI_FORMAT_UINT64(i) 72 #else 73 #define ACPI_FORMAT_NATIVE_UINT(i) 0, (i) 74 #endif 75 76 77 /* 78 * Macros for moving data around to/from buffers that are possibly unaligned. 79 * If the hardware supports the transfer of unaligned data, just do the store. 80 * Otherwise, we have to move one byte at a time. 81 */ 82 #ifdef ACPI_BIG_ENDIAN 83 /* 84 * Macros for big-endian machines 85 */ 86 87 /* These macros reverse the bytes during the move, converting little-endian to big endian */ 88 89 /* Big Endian <== Little Endian */ 90 /* Hi...Lo Lo...Hi */ 91 /* 16-bit source, 16/32/64 destination */ 92 93 #define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[1];\ 94 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[0];} 95 96 #define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d))=0;\ 97 ((UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\ 98 ((UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];} 99 100 #define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\ 101 ((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 102 ((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 103 104 /* 32-bit source, 16/32/64 destination */ 105 106 #define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 107 108 #define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[3];\ 109 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[2];\ 110 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\ 111 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];} 112 113 #define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\ 114 ((UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\ 115 ((UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\ 116 ((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 117 ((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 118 119 /* 64-bit source, 16/32/64 destination */ 120 121 #define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 122 123 #define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 124 125 #define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[7];\ 126 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[6];\ 127 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[5];\ 128 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[4];\ 129 (( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\ 130 (( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\ 131 (( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 132 (( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 133 #else 134 /* 135 * Macros for little-endian machines 136 */ 137 138 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 139 140 /* The hardware supports unaligned transfers, just do the little-endian move */ 141 142 /* 16-bit source, 16/32/64 destination */ 143 144 #define ACPI_MOVE_16_TO_16(d, s) *(UINT16 *)(void *)(d) = *(UINT16 *)(void *)(s) 145 #define ACPI_MOVE_16_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT16 *)(void *)(s) 146 #define ACPI_MOVE_16_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT16 *)(void *)(s) 147 148 /* 32-bit source, 16/32/64 destination */ 149 150 #define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 151 #define ACPI_MOVE_32_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT32 *)(void *)(s) 152 #define ACPI_MOVE_32_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT32 *)(void *)(s) 153 154 /* 64-bit source, 16/32/64 destination */ 155 156 #define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 157 #define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 158 #define ACPI_MOVE_64_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT64 *)(void *)(s) 159 160 #else 161 /* 162 * The hardware does not support unaligned transfers. We must move the 163 * data one byte at a time. These macros work whether the source or 164 * the destination (or both) is/are unaligned. (Little-endian move) 165 */ 166 167 /* 16-bit source, 16/32/64 destination */ 168 169 #define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 170 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];} 171 172 #define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} 173 #define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} 174 175 /* 32-bit source, 16/32/64 destination */ 176 177 #define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 178 179 #define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 180 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\ 181 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\ 182 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];} 183 184 #define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);} 185 186 /* 64-bit source, 16/32/64 destination */ 187 188 #define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 189 #define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 190 #define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 191 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\ 192 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\ 193 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];\ 194 (( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[4];\ 195 (( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[5];\ 196 (( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[6];\ 197 (( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[7];} 198 #endif 199 #endif 200 201 202 /* 203 * Fast power-of-two math macros for non-optimized compilers 204 */ 205 #define _ACPI_DIV(value, PowerOf2) ((UINT32) ((value) >> (PowerOf2))) 206 #define _ACPI_MUL(value, PowerOf2) ((UINT32) ((value) << (PowerOf2))) 207 #define _ACPI_MOD(value, Divisor) ((UINT32) ((value) & ((Divisor) -1))) 208 209 #define ACPI_DIV_2(a) _ACPI_DIV(a, 1) 210 #define ACPI_MUL_2(a) _ACPI_MUL(a, 1) 211 #define ACPI_MOD_2(a) _ACPI_MOD(a, 2) 212 213 #define ACPI_DIV_4(a) _ACPI_DIV(a, 2) 214 #define ACPI_MUL_4(a) _ACPI_MUL(a, 2) 215 #define ACPI_MOD_4(a) _ACPI_MOD(a, 4) 216 217 #define ACPI_DIV_8(a) _ACPI_DIV(a, 3) 218 #define ACPI_MUL_8(a) _ACPI_MUL(a, 3) 219 #define ACPI_MOD_8(a) _ACPI_MOD(a, 8) 220 221 #define ACPI_DIV_16(a) _ACPI_DIV(a, 4) 222 #define ACPI_MUL_16(a) _ACPI_MUL(a, 4) 223 #define ACPI_MOD_16(a) _ACPI_MOD(a, 16) 224 225 #define ACPI_DIV_32(a) _ACPI_DIV(a, 5) 226 #define ACPI_MUL_32(a) _ACPI_MUL(a, 5) 227 #define ACPI_MOD_32(a) _ACPI_MOD(a, 32) 228 229 /* 230 * Rounding macros (Power of two boundaries only) 231 */ 232 #define ACPI_ROUND_DOWN(value, boundary) (((ACPI_SIZE)(value)) & \ 233 (~(((ACPI_SIZE) boundary)-1))) 234 235 #define ACPI_ROUND_UP(value, boundary) ((((ACPI_SIZE)(value)) + \ 236 (((ACPI_SIZE) boundary)-1)) & \ 237 (~(((ACPI_SIZE) boundary)-1))) 238 239 /* Note: sizeof(ACPI_SIZE) evaluates to either 4 or 8 (32- vs 64-bit mode) */ 240 241 #define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a, 4) 242 #define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a, 8) 243 #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a, sizeof(ACPI_SIZE)) 244 245 #define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a, 4) 246 #define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a, 8) 247 #define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a, sizeof(ACPI_SIZE)) 248 249 #define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) 250 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) 251 252 #define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) 253 254 /* Generic (non-power-of-two) rounding */ 255 256 #define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary)) 257 258 #define ACPI_IS_MISALIGNED(value) (((ACPI_SIZE) value) & (sizeof(ACPI_SIZE)-1)) 259 260 /* 261 * Bitmask creation 262 * Bit positions start at zero. 263 * MASK_BITS_ABOVE creates a mask starting AT the position and above 264 * MASK_BITS_BELOW creates a mask starting one bit BELOW the position 265 */ 266 #define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_UINT64_MAX) << ((UINT32) (position)))) 267 #define ACPI_MASK_BITS_BELOW(position) ((ACPI_UINT64_MAX) << ((UINT32) (position))) 268 269 /* Bitfields within ACPI registers */ 270 271 #define ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) ((Val << Pos) & Mask) 272 #define ACPI_REGISTER_INSERT_VALUE(Reg, Pos, Mask, Val) Reg = (Reg & (~(Mask))) | ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) 273 274 #define ACPI_INSERT_BITS(Target, Mask, Source) Target = ((Target & (~(Mask))) | (Source & Mask)) 275 276 /* 277 * An ACPI_NAMESPACE_NODE can appear in some contexts 278 * where a pointer to an ACPI_OPERAND_OBJECT can also 279 * appear. This macro is used to distinguish them. 280 * 281 * The "Descriptor" field is the first field in both structures. 282 */ 283 #define ACPI_GET_DESCRIPTOR_TYPE(d) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType) 284 #define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType = t) 285 286 /* 287 * Macros for the master AML opcode table 288 */ 289 #if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) 290 #define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \ 291 {Name, (UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type} 292 #else 293 #define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \ 294 {(UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type} 295 #endif 296 297 #define ARG_TYPE_WIDTH 5 298 #define ARG_1(x) ((UINT32)(x)) 299 #define ARG_2(x) ((UINT32)(x) << (1 * ARG_TYPE_WIDTH)) 300 #define ARG_3(x) ((UINT32)(x) << (2 * ARG_TYPE_WIDTH)) 301 #define ARG_4(x) ((UINT32)(x) << (3 * ARG_TYPE_WIDTH)) 302 #define ARG_5(x) ((UINT32)(x) << (4 * ARG_TYPE_WIDTH)) 303 #define ARG_6(x) ((UINT32)(x) << (5 * ARG_TYPE_WIDTH)) 304 305 #define ARGI_LIST1(a) (ARG_1(a)) 306 #define ARGI_LIST2(a, b) (ARG_1(b)|ARG_2(a)) 307 #define ARGI_LIST3(a, b, c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) 308 #define ARGI_LIST4(a, b, c, d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) 309 #define ARGI_LIST5(a, b, c, d, e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) 310 #define ARGI_LIST6(a, b, c, d, e, f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) 311 312 #define ARGP_LIST1(a) (ARG_1(a)) 313 #define ARGP_LIST2(a, b) (ARG_1(a)|ARG_2(b)) 314 #define ARGP_LIST3(a, b, c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) 315 #define ARGP_LIST4(a, b, c, d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) 316 #define ARGP_LIST5(a, b, c, d, e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) 317 #define ARGP_LIST6(a, b, c, d, e, f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) 318 319 #define GET_CURRENT_ARG_TYPE(List) (List & ((UINT32) 0x1F)) 320 #define INCREMENT_ARG_LIST(List) (List >>= ((UINT32) ARG_TYPE_WIDTH)) 321 322 /* 323 * Ascii error messages can be configured out 324 */ 325 #ifndef ACPI_NO_ERROR_MESSAGES 326 /* 327 * Error reporting. Callers module and line number are inserted by AE_INFO, 328 * the plist contains a set of parens to allow variable-length lists. 329 * These macros are used for both the debug and non-debug versions of the code. 330 */ 331 #define ACPI_ERROR_NAMESPACE(s, e) AcpiUtNamespaceError (AE_INFO, s, e); 332 #define ACPI_ERROR_METHOD(s, n, p, e) AcpiUtMethodError (AE_INFO, s, n, p, e); 333 #define ACPI_WARN_PREDEFINED(plist) AcpiUtPredefinedWarning plist 334 #define ACPI_INFO_PREDEFINED(plist) AcpiUtPredefinedInfo plist 335 336 #else 337 338 /* No error messages */ 339 340 #define ACPI_ERROR_NAMESPACE(s, e) 341 #define ACPI_ERROR_METHOD(s, n, p, e) 342 #define ACPI_WARN_PREDEFINED(plist) 343 #define ACPI_INFO_PREDEFINED(plist) 344 345 #endif /* ACPI_NO_ERROR_MESSAGES */ 346 347 /* 348 * Debug macros that are conditionally compiled 349 */ 350 #ifdef ACPI_DEBUG_OUTPUT 351 /* 352 * Function entry tracing 353 */ 354 #define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ 355 AcpiUtTrace(ACPI_DEBUG_PARAMETERS) 356 #define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \ 357 AcpiUtTracePtr(ACPI_DEBUG_PARAMETERS, (void *)b) 358 #define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \ 359 AcpiUtTraceU32(ACPI_DEBUG_PARAMETERS, (UINT32)b) 360 #define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \ 361 AcpiUtTraceStr(ACPI_DEBUG_PARAMETERS, (char *)b) 362 363 #define ACPI_FUNCTION_ENTRY() AcpiUtTrackStackPtr() 364 365 /* 366 * Function exit tracing. 367 * WARNING: These macros include a return statement. This is usually considered 368 * bad form, but having a separate exit macro is very ugly and difficult to maintain. 369 * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros 370 * so that "_AcpiFunctionName" is defined. 371 * 372 * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining 373 * about these constructs. 374 */ 375 #ifdef ACPI_USE_DO_WHILE_0 376 #define ACPI_DO_WHILE0(a) do a while(0) 377 #else 378 #define ACPI_DO_WHILE0(a) a 379 #endif 380 381 #define return_VOID ACPI_DO_WHILE0 ({ \ 382 AcpiUtExit (ACPI_DEBUG_PARAMETERS); \ 383 return;}) 384 /* 385 * There are two versions of most of the return macros. The default version is 386 * safer, since it avoids side-effects by guaranteeing that the argument will 387 * not be evaluated twice. 388 * 389 * A less-safe version of the macros is provided for optional use if the 390 * compiler uses excessive CPU stack (for example, this may happen in the 391 * debug case if code optimzation is disabled.) 392 */ 393 #ifndef ACPI_SIMPLE_RETURN_MACROS 394 395 #define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ 396 register ACPI_STATUS _s = (s); \ 397 AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, _s); \ 398 return (_s); }) 399 #define return_PTR(s) ACPI_DO_WHILE0 ({ \ 400 register void *_s = (void *) (s); \ 401 AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) _s); \ 402 return (_s); }) 403 #define return_VALUE(s) ACPI_DO_WHILE0 ({ \ 404 register UINT64 _s = (s); \ 405 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, _s); \ 406 return (_s); }) 407 #define return_UINT8(s) ACPI_DO_WHILE0 ({ \ 408 register UINT8 _s = (UINT8) (s); \ 409 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \ 410 return (_s); }) 411 #define return_UINT32(s) ACPI_DO_WHILE0 ({ \ 412 register UINT32 _s = (UINT32) (s); \ 413 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \ 414 return (_s); }) 415 #else /* Use original less-safe macros */ 416 417 #define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ 418 AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, (s)); \ 419 return((s)); }) 420 #define return_PTR(s) ACPI_DO_WHILE0 ({ \ 421 AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) (s)); \ 422 return((s)); }) 423 #define return_VALUE(s) ACPI_DO_WHILE0 ({ \ 424 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) (s)); \ 425 return((s)); }) 426 #define return_UINT8(s) return_VALUE(s) 427 #define return_UINT32(s) return_VALUE(s) 428 429 #endif /* ACPI_SIMPLE_RETURN_MACROS */ 430 431 432 /* Conditional execution */ 433 434 #define ACPI_DEBUG_EXEC(a) a 435 #define ACPI_DEBUG_ONLY_MEMBERS(a) a; 436 #define _VERBOSE_STRUCTURES 437 438 439 /* Various object display routines for debug */ 440 441 #define ACPI_DUMP_STACK_ENTRY(a) AcpiExDumpOperand((a), 0) 442 #define ACPI_DUMP_OPERANDS(a, b ,c) AcpiExDumpOperands(a, b, c) 443 #define ACPI_DUMP_ENTRY(a, b) AcpiNsDumpEntry (a, b) 444 #define ACPI_DUMP_PATHNAME(a, b, c, d) AcpiNsDumpPathname(a, b, c, d) 445 #define ACPI_DUMP_BUFFER(a, b) AcpiUtDumpBuffer((UINT8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT) 446 447 #else 448 /* 449 * This is the non-debug case -- make everything go away, 450 * leaving no executable debug code! 451 */ 452 #define ACPI_DEBUG_EXEC(a) 453 #define ACPI_DEBUG_ONLY_MEMBERS(a) 454 #define ACPI_FUNCTION_TRACE(a) 455 #define ACPI_FUNCTION_TRACE_PTR(a, b) 456 #define ACPI_FUNCTION_TRACE_U32(a, b) 457 #define ACPI_FUNCTION_TRACE_STR(a, b) 458 #define ACPI_FUNCTION_EXIT 459 #define ACPI_FUNCTION_STATUS_EXIT(s) 460 #define ACPI_FUNCTION_VALUE_EXIT(s) 461 #define ACPI_FUNCTION_ENTRY() 462 #define ACPI_DUMP_STACK_ENTRY(a) 463 #define ACPI_DUMP_OPERANDS(a, b, c) 464 #define ACPI_DUMP_ENTRY(a, b) 465 #define ACPI_DUMP_TABLES(a, b) 466 #define ACPI_DUMP_PATHNAME(a, b, c, d) 467 #define ACPI_DUMP_BUFFER(a, b) 468 #define ACPI_DEBUG_PRINT(pl) 469 #define ACPI_DEBUG_PRINT_RAW(pl) 470 471 #define return_VOID return 472 #define return_ACPI_STATUS(s) return(s) 473 #define return_VALUE(s) return(s) 474 #define return_UINT8(s) return(s) 475 #define return_UINT32(s) return(s) 476 #define return_PTR(s) return(s) 477 478 #endif /* ACPI_DEBUG_OUTPUT */ 479 480 /* 481 * Some code only gets executed when the debugger is built in. 482 * Note that this is entirely independent of whether the 483 * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. 484 */ 485 #ifdef ACPI_DEBUGGER 486 #define ACPI_DEBUGGER_EXEC(a) a 487 #else 488 #define ACPI_DEBUGGER_EXEC(a) 489 #endif 490 491 492 /* 493 * Memory allocation tracking (DEBUG ONLY) 494 */ 495 #define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ 496 497 #ifndef ACPI_DBG_TRACK_ALLOCATIONS 498 499 /* Memory allocation */ 500 501 #define ACPI_ALLOCATE(a) AcpiUtAllocate((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 502 #define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroed((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 503 #define ACPI_FREE(a) AcpiOsFree(a) 504 #define ACPI_MEM_TRACKING(a) 505 506 #else 507 508 /* Memory allocation */ 509 510 #define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 511 #define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 512 #define ACPI_FREE(a) AcpiUtFreeAndTrack(a, ACPI_MEM_PARAMETERS) 513 #define ACPI_MEM_TRACKING(a) a 514 515 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 516 517 518 /* 519 * Macros used for ACPICA utilities only 520 */ 521 522 /* Generate a UUID */ 523 524 #define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ 525 (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \ 526 (b) & 0xFF, ((b) >> 8) & 0xFF, \ 527 (c) & 0xFF, ((c) >> 8) & 0xFF, \ 528 (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) 529 530 #define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7')) 531 532 533 #endif /* ACMACROS_H */ 534