xref: /titanic_50/usr/src/uts/common/sys/ppmvar.h (revision 3d729aecc03ea6ebb9bd5d56b8dccd24f57daa41)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 /*
26  * Copyright (c) 2009,  Intel Corporation.
27  * All Rights Reserved.
28  */
29 
30 #ifndef _SYS_PPMVAR_H
31 #define	_SYS_PPMVAR_H
32 
33 #include <sys/epm.h>
34 #include <sys/sunldi.h>
35 
36 #ifdef	__cplusplus
37 extern "C" {
38 #endif
39 
40 
41 typedef struct ppm_unit {
42 	dev_info_t	*dip;		/* node dev info */
43 	kmutex_t	lock;		/* global driver lock */
44 	uint_t		states;		/* driver states */
45 	timeout_id_t	led_tid;	/* timeout id for LED */
46 } ppm_unit_t;
47 
48 /*
49  * driver states
50  */
51 #define	PPM_STATE_SUSPENDED	0x1	/* driver is suspended */
52 
53 /*
54  * Check for domain operational
55  */
56 #define	PPM_DOMAIN_UP(domp)	(!(domp->dflags & PPMD_OFFLINE))
57 
58 /*
59  * LED constants
60  */
61 #define	PPM_LED_PULSE		(drv_usectohz(250000))	/* 0.25 seconds */
62 #define	PPM_LEDON_INTERVAL	(1 * PPM_LED_PULSE)
63 #define	PPM_LEDOFF_INTERVAL	(8 * PPM_LED_PULSE)
64 #define	PPM_LEDON		1	/* (s10) */
65 #define	PPM_LEDOFF		0	/* (s10) */
66 
67 /*
68  * internal form of "ppm.conf" data
69  */
70 struct ppm_db {
71 	struct ppm_db	*next;
72 	char		*name;		/* device name */
73 	int		plen;		/* strlen before wildcard(s10) */
74 	int		wccnt;		/* upto 2 '*' allowed */
75 	int		wcpos[2];	/* '*' location in pathname */
76 };
77 typedef struct ppm_db ppm_db_t;
78 
79 struct ppm_cdata {
80 	char *name;			/* property name */
81 	char **strings;			/* string array */
82 	uint_t cnt;			/* property count */
83 };
84 
85 /*
86  * ppm device info
87  */
88 struct ppm_dev {
89 	struct ppm_dev	*next;
90 	struct ppm_domain *domp;
91 	dev_info_t	*dip;
92 	char		*path;		/* OBP device pathname */
93 	int		cmpt;		/* component number */
94 	int		rplvl;		/* last requested power level */
95 	int		level;		/* actual current power level */
96 	int		lowest;		/* lowest power level for device */
97 	int		highest;	/* highest power level for device */
98 	uint_t		flags;
99 };
100 typedef struct ppm_dev ppm_dev_t;
101 
102 /*
103  * ppm_dev.flags field
104  */
105 #define	PPMDEV_PCI66_D2		0x1	/* device support D2 at pci 66mhz */
106 #define	PPMDEV_PCI_PROP_CLKPM	0x2	/* clock can be power managed */
107 #define	PPM_PM_POWEROP		0x10	/* power level change, initiated  */
108 					/* from PM is in progress.	  */
109 #define	PPM_PHC_WHILE_SET_POWER 0x20	/* power level of a device is	  */
110 					/* changed through		  */
111 					/* pm_power_has_changed path	  */
112 					/* while power level change,	  */
113 					/* initiated from PM is in	  */
114 					/* progress.			  */
115 
116 
117 /*
118  * per domain record of device _ever_ managed by ppm
119  */
120 struct ppm_owned {
121 	struct ppm_owned *next;
122 	char	*path;		/* device pathname */
123 	int	initializing;	/* initializing  flag */
124 };
125 typedef struct ppm_owned ppm_owned_t;
126 
127 
128 /*
129  * domain control data structure -
130  *   when you need to do an op for a domain, look up the op in the
131  *   cmd member of the struct, and then perform the method on the
132  *   path using iowr cmd with the args specified in val or val and
133  *   mask or the speed index.
134  */
135 struct ppm_dc {
136 	struct ppm_dc	*next;
137 	ldi_handle_t	lh;	/* layered (ldi) handle			*/
138 	char	*path;		/* control device prom pathname		*/
139 	uint_t	cmd;		/* search key: op to be performed	*/
140 				/* one of: PPMDC_CPU_NEXT		*/
141 				/* PPMDC_CPU_GO, PPMDC_FET_ON,		*/
142 				/* PPMDC_FET_OFF, PPMDC_LED_ON,		*/
143 				/* PPMDC_LED_OFF, PPMDC_PCI_ON,		*/
144 				/* PPMDC_ENTER_S3, PPMDC_PCI_OFF	*/
145 				/* PPMDC_EXIT_S3 commands		*/
146 	uint_t	method;		/* control method / union selector	*/
147 				/* one of PPMDC_KIO, PPMDC_I2CKIO,	*/
148 				/* PPMDC_CPUSPEEDKIO			*/
149 
150 	union {
151 		/* In each sub struct in union, the first three fields	*/
152 		/* must be .iord, .iowr and .val and in such order.	*/
153 		/* The .method field above selects a union sub struct	*/
154 		/* for a particular .cmd operation.			*/
155 		/* The association between .method and .cmd is platform	*/
156 		/* specific, therefore described in ppm.conf file.	*/
157 
158 		/* PPMDC_KIO: simple KIO 				*/
159 		struct m_kio {
160 			uint_t	iord;	/* IOCTL read cmd		*/
161 			uint_t	iowr;	/* IOCTL write cmd		*/
162 			uint_t	val;	/* ioctl arg			*/
163 			uint_t	delay;	/* total delay before this 	*/
164 					/* operation can be carried out	*/
165 			uint_t	post_delay; /* post delay, if any	*/
166 		} kio;
167 
168 #ifdef sun4u
169 		/* PPMDC_I2CKIO: KIO requires 'arg' as struct i2c_gpio	*/
170 		/*    (defined in i2c_client.h)				*/
171 		struct m_i2ckio {
172 			uint_t	iord;	/* IOCTL read cmd		*/
173 			uint_t	iowr;	/* IOCTL write cmd 		*/
174 			uint_t	val;	/* register content		*/
175 			uint_t	mask;	/* mask to select relevant bits	*/
176 					/* of register content		*/
177 			uint_t	delay;	/* total delay before this 	*/
178 					/* operation can be carried out	*/
179 			uint_t	post_delay; /* post delay, if any	*/
180 		} i2c;
181 #endif
182 
183 		/* PPMDC_CPUSPEEDKIO, PPMDC_VCORE: cpu estar related	*/
184 		/* simple KIO						*/
185 		struct m_cpu {
186 			uint_t	iord;	/* IOCTL read cmd 		*/
187 			uint_t	iowr;	/* IOCTL write cmd 		*/
188 			int	val;	/* new register value		*/
189 			uint_t	speeds;	/* number of speeds cpu supports */
190 			uint_t	delay;	/* microseconds post op delay	*/
191 		} cpu;
192 	} m_un;
193 };
194 typedef struct ppm_dc ppm_dc_t;
195 
196 /*
197  * ppm_dc.cmd field -
198  */
199 #define	PPMDC_CPU_NEXT		2
200 #define	PPMDC_PRE_CHNG		3
201 #define	PPMDC_CPU_GO		4
202 #define	PPMDC_POST_CHNG		5
203 #define	PPMDC_FET_ON		6
204 #define	PPMDC_FET_OFF		7
205 #define	PPMDC_LED_ON		8
206 #define	PPMDC_LED_OFF		9
207 #define	PPMDC_CLK_ON		10
208 #define	PPMDC_CLK_OFF		11
209 #define	PPMDC_PRE_PWR_OFF	12
210 #define	PPMDC_PRE_PWR_ON	13
211 #define	PPMDC_POST_PWR_ON	14
212 #define	PPMDC_PWR_OFF		15
213 #define	PPMDC_PWR_ON		16
214 #define	PPMDC_RESET_OFF		17
215 #define	PPMDC_RESET_ON		18
216 #define	PPMDC_ENTER_S3		19
217 #define	PPMDC_EXIT_S3		20
218 
219 /*
220  * ppm_dc.method field - select union element
221  */
222 #define	PPMDC_KIO  		1	/* simple ioctl with val as arg	*/
223 #define	PPMDC_CPUSPEEDKIO	2	/* ioctl with speed index arg	*/
224 #define	PPMDC_VCORE		3	/* CPU Vcore change operation */
225 #ifdef sun4u
226 #define	PPMDC_I2CKIO		4	/* ioctl with i2c_gpio_t as arg	*/
227 #endif
228 
229 /*
230  * devices that are powered by the same source
231  * are grouped by this struct as a "power domain"
232  */
233 struct ppm_domain {
234 	char		*name;		/* domain name */
235 	int		dflags;		/* domain flags */
236 	int		pwr_cnt;	/* number of powered up devices */
237 	ppm_db_t	*conflist;	/* all devices from ppm.conf file */
238 	ppm_dev_t	*devlist;	/* current attached devices */
239 	char		*propname;	/* domain property name */
240 	kmutex_t	lock;		/* domain lock */
241 	int		refcnt;		/* domain lock ref count */
242 	int		model;		/* pm model, CPU, FET or LED	*/
243 	int		status;		/* domain specific status */
244 	int		sub_domain;	/* sub-domain */
245 	ppm_dc_t	*dc;		/* domain control method */
246 	ppm_owned_t	*owned;		/* list of ever owned devices */
247 	struct ppm_domain	*next;	/* a linked list */
248 	clock_t		last_off_time;	/* last time domain was off	*/
249 
250 };
251 typedef struct ppm_domain ppm_domain_t;
252 
253 
254 /*
255  * ppm_domain.model field -
256  */
257 #define	PPMD_CPU		1	/* cpu PM model */
258 #define	PPMD_FET		2	/* power FET pm model */
259 #define	PPMD_LED		3	/* LED pm model */
260 #define	PPMD_PCI		4	/* PCI pm model */
261 #define	PPMD_PCI_PROP		5	/* PCI_PROP pm model */
262 #define	PPMD_PCIE		6	/* PCI Express pm model */
263 #define	PPMD_SX			7	/* ACPI Sx pm model */
264 
265 #define	PPMD_IS_PCI(model) \
266 	((model) == PPMD_PCI || (model) == PPMD_PCI_PROP)
267 
268 /*
269  * ppm_domain.status field -
270  */
271 #define	PPMD_OFF		0x0	/* FET/LED/PCI clock: off */
272 #define	PPMD_ON			0x1	/* FET/LED/PCI clock: on */
273 
274 /*
275  * ppm_domain.dflags field -
276  */
277 #define	PPMD_LOCK_ONE		0x1
278 #define	PPMD_LOCK_ALL		0x4
279 #define	PPMD_PCI33MHZ		0x1000	/* 33mhz PCI slot */
280 #define	PPMD_PCI66MHZ		0x2000	/* 66mhz PCI slot */
281 #define	PPMD_INITCHILD_CLKON	0x4000	/* clk turned on in init_child */
282 #define	PPMD_OFFLINE		0x10000	/* domain is not functional */
283 #define	PPMD_CPU_READY		0x20000	/* CPU domain can process power call */
284 
285 struct ppm_domit {
286 	char	*name;
287 	int	model;
288 	int	dflags;
289 	int	status;
290 };
291 extern struct ppm_domit ppm_domit_data[];
292 
293 /*
294  * XXppm driver-specific routines called from common code (s10)
295  */
296 struct ppm_funcs {
297 	void	(*dev_init)(ppm_dev_t *);
298 	void	(*dev_fini)(ppm_dev_t *);
299 	void	(*iocset)(uint8_t);
300 	uint8_t	(*iocget)(void);
301 };
302 
303 extern ppm_domain_t	*ppm_domain_p;
304 extern void		*ppm_statep;
305 extern int		ppm_inst;
306 extern ppm_domain_t *ppm_domains[];	/* (s10) */
307 extern struct ppm_funcs ppmf;		/* (s10) */
308 
309 extern void		ppm_dev_init(ppm_dev_t *);
310 extern void		ppm_dev_fini(ppm_dev_t *);
311 extern int		ppm_create_db(dev_info_t *);
312 extern int		ppm_claim_dev(dev_info_t *);
313 extern void		ppm_rem_dev(dev_info_t *);
314 extern ppm_dev_t	*ppm_get_dev(dev_info_t *, ppm_domain_t *);
315 extern void		ppm_init_cb(dev_info_t *);
316 extern int		ppm_init_lyr(ppm_dc_t *, dev_info_t *);
317 extern ppm_domain_t	*ppm_lookup_dev(dev_info_t *);
318 extern ppm_domain_t	*ppm_lookup_domain(char *);
319 extern ppm_dc_t		*ppm_lookup_dc(ppm_domain_t *, int);
320 extern ppm_dc_t		*ppm_lookup_hndl(int, ppm_dc_t *);
321 extern ppm_domain_t	*ppm_get_domain_by_dev(const char *);
322 extern boolean_t	ppm_none_else_holds_power(ppm_domain_t *);
323 extern ppm_owned_t	*ppm_add_owned(dev_info_t *, ppm_domain_t *);
324 extern void		ppm_lock_one(ppm_dev_t *, power_req_t *, int *);
325 extern void		ppm_lock_all(ppm_domain_t *, power_req_t *, int *);
326 extern boolean_t	ppm_manage_early_cpus(dev_info_t *, int, int *);
327 extern int		ppm_change_cpu_power(ppm_dev_t *, int);
328 extern int		ppm_revert_cpu_power(ppm_dev_t *, int);
329 extern ppm_dev_t	*ppm_add_dev(dev_info_t *, ppm_domain_t *);
330 
331 #define	PPM_GET_PRIVATE(dip) \
332     DEVI(dip)->devi_pm_ppm_private
333 #define	PPM_SET_PRIVATE(dip, datap) \
334     DEVI(dip)->devi_pm_ppm_private = datap
335 
336 #define	PPM_LOCK_DOMAIN(domp) {			\
337 	if (!MUTEX_HELD(&(domp)->lock))		\
338 		mutex_enter(&(domp)->lock);	\
339 	(domp)->refcnt++;			\
340 }
341 
342 #define	PPM_UNLOCK_DOMAIN(domp) {		\
343 	ASSERT(MUTEX_HELD(&(domp)->lock) &&	\
344 		(domp)->refcnt > 0);		\
345 	if (--(domp)->refcnt == 0)		\
346 		mutex_exit(&(domp)->lock);	\
347 }
348 
349 /*
350  * debug support
351  */
352 #ifdef DEBUG
353 #include <sys/promif.h>
354 
355 extern char	*ppm_get_ctlstr(int, uint_t);
356 extern void	ppm_print_dc(struct ppm_dc *);
357 
358 extern uint_t ppm_debug;
359 
360 #define	D_CREATEDB	0x00000001
361 #define	D_CLAIMDEV	0x00000002
362 #define	D_ADDDEV	0x00000004
363 #define	D_REMDEV	0x00000008
364 #define	D_LOWEST	0x00000010
365 #define	D_SETLVL	0x00000020
366 #define	D_GPIO		0x00000040
367 #define	D_CPU		0x00000080
368 #define	D_FET		0x00000100
369 #define	D_PCIUPA	0x00000200
370 #define	D_1394		0x00000400
371 #define	D_CTLOPS1	0x00000800
372 #define	D_CTLOPS2	0x00001000
373 #define	D_SOME		0x00002000
374 #define	D_LOCKS		0x00004000
375 #define	D_IOCTL		0x00008000
376 #define	D_ATTACH	0x00010000
377 #define	D_DETACH	0x00020000
378 #define	D_OPEN		0x00040000
379 #define	D_CLOSE		0x00080000
380 #define	D_INIT		0x00100000
381 #define	D_FINI		0x00200000
382 #define	D_ERROR		0x00400000
383 #define	D_SETPWR	0x00800000
384 #define	D_LED		0x01000000
385 #define	D_PCI		0x02000000
386 #define	D_PPMDC		0x04000000
387 #define	D_CPR		0x08000000
388 
389 #define	PPMD(level, arglist) {			\
390 	if (ppm_debug & (level)) {		\
391 		pm_log arglist;			\
392 	}					\
393 }
394 /* (s10) */
395 #define	DPRINTF		PPMD
396 
397 #else	/* DEBUG */
398 #define	PPMD(level, arglist)
399 #define	DPRINTF(flag, args)	/* (s10) */
400 #endif	/* DEBUG */
401 
402 #ifdef	__cplusplus
403 }
404 #endif
405 
406 #endif	/* _SYS_PPMVAR_H */
407