1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 * 25 * Copyright (c) 1983-1989 by AT&T. 26 * All rights reserved. 27 */ 28 29 /* 30 * Portions of this source code were derived from Berkeley 4.3 BSD 31 * under license from the Regents of the University of California. 32 */ 33 34 #ifndef _SYS_MTIO_H 35 #define _SYS_MTIO_H 36 37 #pragma ident "%Z%%M% %I% %E% SMI" 38 39 #include <sys/types.h> 40 41 #ifdef __cplusplus 42 extern "C" { 43 #endif 44 45 /* 46 * Structures and definitions for mag tape io control commands 47 */ 48 49 /* 50 * structure for MTIOCTOP - mag tape op command 51 */ 52 struct mtop { 53 short mt_op; /* operations defined below */ 54 daddr_t mt_count; /* how many of them */ 55 }; 56 57 #if defined(_SYSCALL32) 58 struct mtop32 { 59 short mt_op; /* operations defined below */ 60 daddr32_t mt_count; /* how many of them */ 61 }; 62 #endif /* _SYSCALL32 */ 63 64 65 /* 66 * values for mt_op 67 */ 68 #define MTWEOF 0 /* write an end-of-file record */ 69 #define MTFSF 1 /* forward space over file mark */ 70 #define MTBSF 2 /* backward space over file mark (1/2" only ) */ 71 #define MTFSR 3 /* forward space to inter-record gap */ 72 #define MTBSR 4 /* backward space to inter-record gap */ 73 #define MTREW 5 /* rewind */ 74 #define MTOFFL 6 /* rewind and put the drive offline */ 75 #define MTNOP 7 /* no operation, sets status only */ 76 #define MTRETEN 8 /* retension the tape (cartridge tape only) */ 77 #define MTERASE 9 /* erase the entire tape */ 78 #define MTEOM 10 /* position to end of media */ 79 #define MTNBSF 11 /* backward space file to BOF */ 80 #define MTSRSZ 12 /* set record size */ 81 #define MTGRSZ 13 /* get record size */ 82 #define MTLOAD 14 /* for loading a tape (use o_delay to open */ 83 /* the tape device) */ 84 85 /* 86 * structure for MTIOCGET - mag tape get status command 87 */ 88 struct mtget { 89 short mt_type; /* type of magtape device */ 90 /* the following two registers are grossly device dependent */ 91 short mt_dsreg; /* ``drive status'' register */ 92 short mt_erreg; /* ``error'' register */ 93 /* optional error info. */ 94 daddr_t mt_resid; /* residual count */ 95 daddr_t mt_fileno; /* file number of current position */ 96 daddr_t mt_blkno; /* block number of current position */ 97 ushort_t mt_flags; 98 short mt_bf; /* optimum blocking factor */ 99 }; 100 101 #if defined(_SYSCALL32) 102 struct mtget32 { 103 short mt_type; /* type of magtape device */ 104 /* the following two registers are grossly device dependent */ 105 short mt_dsreg; /* ``drive status'' register */ 106 short mt_erreg; /* ``error'' register */ 107 /* optional error info. */ 108 daddr32_t mt_resid; /* residual count */ 109 daddr32_t mt_fileno; /* file number of current position */ 110 daddr32_t mt_blkno; /* block number of current position */ 111 ushort_t mt_flags; 112 short mt_bf; /* optimum blocking factor */ 113 }; 114 #endif /* _SYSCALL32 */ 115 116 #define MT_NDENSITIES 4 117 #define MT_NSPEEDS 4 118 119 /* 120 * struct for MTIOCGETDRIVETYPE - get tape config data 121 */ 122 struct mtdrivetype { 123 char name[64]; /* Name, for debug */ 124 char vid[25]; /* Vendor id and model (product) id */ 125 char type; /* Drive type for driver */ 126 int bsize; /* Block size */ 127 int options; /* Drive options */ 128 int max_rretries; /* Max read retries */ 129 int max_wretries; /* Max write retries */ 130 uchar_t densities[MT_NDENSITIES]; /* density codes, low->hi */ 131 uchar_t default_density; /* Default density chosen */ 132 uchar_t speeds[MT_NSPEEDS]; /* speed codes, low->hi */ 133 ushort_t non_motion_timeout; /* Inquiry type commands */ 134 ushort_t io_timeout; /* io timeout. seconds */ 135 ushort_t rewind_timeout; /* rewind timeout. seconds */ 136 ushort_t space_timeout; /* space cmd timeout. seconds */ 137 ushort_t load_timeout; /* load tape time in seconds */ 138 ushort_t unload_timeout; /* Unload tape time in scounds */ 139 ushort_t erase_timeout; /* erase timeout. seconds */ 140 }; 141 142 143 struct mtdrivetype_request { 144 int size; 145 struct mtdrivetype *mtdtp; 146 }; 147 148 #if defined(_SYSCALL32) 149 struct mtdrivetype_request32 { 150 int size; 151 caddr32_t mtdtp; 152 }; 153 #endif /* _SYSCALL32 */ 154 155 156 /* 157 * values for mt_flags 158 */ 159 #define MTF_SCSI 0x01 160 #define MTF_REEL 0x02 161 #define MTF_ASF 0x04 162 163 #define MTF_TAPE_HEAD_DIRTY 0x08 164 #define MTF_TAPE_CLN_SUPPORTED 0x10 165 #define MTF_WORM_MEDIA 0x20 166 167 /* 168 * Constants for mt_type byte (these are somewhat obsolete) 169 */ 170 #define MT_ISTS 0x01 /* vax: unibus ts-11 */ 171 #define MT_ISHT 0x02 /* vax: massbus tu77, etc */ 172 #define MT_ISTM 0x03 /* vax: unibus tm-11 */ 173 #define MT_ISMT 0x04 /* vax: massbus tu78 */ 174 #define MT_ISUT 0x05 /* vax: unibus gcr */ 175 #define MT_ISCPC 0x06 /* sun: multibus cpc */ 176 #define MT_ISAR 0x07 /* sun: multibus archive */ 177 #define MT_ISSC 0x08 /* sun: SCSI archive */ 178 #define MT_ISSYSGEN11 0x10 /* sun: SCSI Sysgen, QIC-11 only */ 179 #define MT_ISSYSGEN 0x11 /* sun: SCSI Sysgen QIC-24/11 */ 180 #define MT_ISDEFAULT 0x12 /* sun: SCSI default CCS */ 181 #define MT_ISCCS3 0x13 /* sun: SCSI generic (unknown) CCS */ 182 #define MT_ISMT02 0x14 /* sun: SCSI Emulex MT02 */ 183 #define MT_ISVIPER1 0x15 /* sun: SCSI Archive QIC-150 Viper */ 184 #define MT_ISWANGTEK1 0x16 /* sun: SCSI Wangtek QIC-150 */ 185 #define MT_ISCCS7 0x17 /* sun: SCSI generic (unknown) CCS */ 186 #define MT_ISCCS8 0x18 /* sun: SCSI generic (unknown) CCS */ 187 #define MT_ISCCS9 0x19 /* sun: SCSI generic (unknown) CCS */ 188 #define MT_ISCCS11 0x1a /* sun: SCSI generic (unknown) CCS */ 189 #define MT_ISCCS12 0x1b /* sun: SCSI generic (unknown) CCS */ 190 #define MT_ISCCS13 0x1c /* sun: SCSI generic (unknown) CCS */ 191 #define MT_ISCCS14 0x1d /* sun: SCSI generic (unknown) CCS */ 192 #define MT_ISCCS15 0x1e /* sun: SCSI generic (unknown) CCS */ 193 #define MT_ISCCS16 0x1f /* sun: SCSI generic (unknown) CCS */ 194 #define MT_ISCDC 0x20 /* sun: SCSI CDC 1/2" cartridge */ 195 #define MT_ISFUJI 0x21 /* sun: SCSI Fujitsu 1/2" cartridge */ 196 #define MT_ISKENNEDY 0x22 /* sun: SCSI Kennedy 1/2" reel */ 197 #define MT_ISHP 0x23 /* sun: SCSI HP 1/2" reel */ 198 #define MT_ISSTC 0x24 /* sun: SCSI IBM STC 3490 */ 199 #define MT_ISANRITSU 0x25 /* nihon sun: Anritsu 1/2" reel */ 200 #define MT_ISCCS23 0x26 /* sun: SCSI generic 1/2" */ 201 #define MT_ISCCS24 0x27 /* sun: SCSI generic 1/2" */ 202 #define MT_ISEXABYTE 0x28 /* sun: SCSI Exabyte 8mm cartridge */ 203 #define MT_ISEXB8500 0x29 /* sun: SCSI Exabyte 8500 8mm cart */ 204 #define MT_ISWANGTHS 0x2a /* sun: SCSI Wangtek 6130HS RDAT */ 205 #define MT_ISWANGDAT 0x2b /* sun: SCSI WangDAT */ 206 #define MT_ISPYTHON 0x2c /* sun: SCSI Archive Python DAT */ 207 #define MT_ISCCS28 0x2d /* sun: SCSI generic DAT CCS */ 208 #define MT_ISCCS29 0x2e /* sun: SCSI generic (unknown) CCS */ 209 #define MT_ISCCS30 0x2f /* sun: SCSI generic (unknown) CCS */ 210 #define MT_ISCCS31 0x30 /* sun: SCSI generic (unknown) CCS */ 211 #define MT_ISCCS32 0x31 /* sun: SCSI generic (unknown) CCS */ 212 213 214 /* 215 * these are recommended 216 */ 217 #define MT_ISQIC 0x32 /* generic QIC tape drive */ 218 #define MT_ISREEL 0x33 /* generic reel tape drive */ 219 #define MT_ISDAT 0x34 /* generic DAT tape drive */ 220 #define MT_IS8MM 0x35 /* generic 8mm tape drive */ 221 #define MT_ISOTHER 0x36 /* generic other type of tape drive */ 222 223 /* more Sun devices */ 224 #define MT_ISTAND25G 0x37 /* sun: SCSI Tandberg 2.5 Gig QIC */ 225 #define MT_ISDLT 0x38 /* sun: SCSI DLT tape drive */ 226 #define MT_ISSTK9840 0x39 /* sun: STK 9840, 9940, 9840B */ 227 #define MT_ISBMDLT1 0x3a /* sun: Benchmark DLT1 */ 228 #define MT_LTO 0x3b /* sun: LTO,s by Hp, Seagate, IBM .. */ 229 #define MT_ISAIT 0x3c /* Sony: AIT I II III and SAIT */ 230 231 /* 232 * Device table structure and data for looking tape name from 233 * tape id number. Used by mt.c. 234 */ 235 struct mt_tape_info { 236 short t_type; /* type of magtape device */ 237 char *t_name; /* printing name */ 238 char *t_dsbits; /* "drive status" register */ 239 char *t_erbits; /* "error" register */ 240 }; 241 242 /* 243 * this table is now obsolete, use MTIOCGETDRIVETYPE ioctl 244 * 245 * WARNING: this table will be eliminated in some future release 246 */ 247 #define MT_TAPE_INFO {\ 248 { MT_ISSYSGEN11, "Sysgen QIC-11", 0, 0 }, \ 249 { MT_ISSYSGEN, "Sysgen QIC-24", 0, 0 }, \ 250 { MT_ISMT02, "Emulex MT-02 QIC-24", 0, 0 }, \ 251 { MT_ISVIPER1, "Archive QIC-150", 0, 0 }, \ 252 { MT_ISWANGTEK1, "Wangtek QIC-150", 0, 0 }, \ 253 { MT_ISKENNEDY, "Kennedy 9612 1/2-inch", 0, 0 }, \ 254 { MT_ISANRITSU, "Anritsu 1/2-inch", 0, 0 }, \ 255 { MT_ISHP, "HP 88780 1/2-inch", 0, 0 }, \ 256 { MT_ISEXABYTE, "Exabyte EXB-8200 8mm", 0, 0 }, \ 257 { MT_ISEXB8500, "Exabyte EXB-8500 8mm", 0, 0 }, \ 258 { MT_ISWANGDAT, "WangDAT 3.81mm", 0, 0 }, \ 259 { MT_ISWANGTHS, "Wangtek 4mm RDAT", 0, 0 }, \ 260 { MT_ISPYTHON, "Archive Python 4mm Helical Scan", 0, 0 }, \ 261 { MT_ISSTC, "STC 1/2\" Cartridge", 0, 0}, \ 262 { MT_ISTAND25G, "Tandberg 2.5 Gig QIC", 0, 0}, \ 263 { MT_ISQIC, "QIC", 0, 0}, \ 264 { MT_ISREEL, "REEL", 0, 0}, \ 265 { MT_ISDAT, "DAT", 0, 0}, \ 266 { MT_IS8MM, "8mm", 0, 0}, \ 267 { MT_ISOTHER, "Other", 0, 0}, \ 268 { 0 } \ 269 } 270 271 /* mag tape io control commands */ 272 #define MTIOC ('m'<<8) 273 #define MTIOCTOP (MTIOC|1) /* do a mag tape op */ 274 #define MTIOCGET (MTIOC|2) /* get tape status */ 275 #define MTIOCGETDRIVETYPE (MTIOC|3) /* get tape config data */ 276 #define MTIOCPERSISTENT (MTIOC|4) /* turn on persistent errors */ 277 #define MTIOCPERSISTENTSTATUS (MTIOC|5) /* query persis. err status */ 278 #define MTIOCLRERR (MTIOC|6) /* clear a persitent error */ 279 #define MTIOCGUARANTEEDORDER (MTIOC|7) /* check for guaranteed order */ 280 #define MTIOCRESERVE (MTIOC|8) /* preserve reserve */ 281 #define MTIOCRELEASE (MTIOC|9) /* turnoff preserve reserve */ 282 #define MTIOCFORCERESERVE (MTIOC|10) /* break reservation drive */ 283 284 #define MTIOCSTATE (MTIOC|13) /* Inquire insert/eject state */ 285 286 #define MTIOCREADIGNOREILI (MTIOC|14) /* Enable/Disable ILI */ 287 #define MTIOCREADIGNOREEOFS (MTIOC|15) /* Enable/Disable Ignore EOF */ 288 #define MTIOCSHORTFMK (MTIOC|16) /* Enable/Disable Short FMK */ 289 290 /* 291 * This state enum is the argument passed to the MTIOCSTATE ioctl. 292 */ 293 enum mtio_state { MTIO_NONE, MTIO_EJECTED, MTIO_INSERTED }; 294 295 #ifndef KERNEL 296 /* 297 * don't use DEFTAPE. 298 */ 299 #define DEFTAPE "/dev/rmt/0" 300 #endif 301 302 /* 303 * Layout of minor device byte 304 * 15 - 8 7 6 5 4 3 2 1 0 305 * -------------------------------------------- 306 * | | | | | | | | |----| Unit #. lower 2 bits 307 * | | | | | | | |---------- No rewind on close bit.... 308 * | | | | | |----|--------------- Density Select 309 * | | | | |------------------------- Resrvd.(add. campus dens. bit) 310 * | | | |------------------------------ BSD behavior 311 * |----|----|----------------------------------- Unit # bit 2-6 312 */ 313 314 #define MTUNIT(dev) (((getminor(dev) & 0xff80) >> 5) + \ 315 (getminor(dev) & 0x3)) 316 #define MT_NOREWIND (1 <<2) 317 #define MT_DENSITY_MASK (3 <<3) 318 #define MT_DENSITY1 (0 <<3) /* Lowest density/format */ 319 #define MT_DENSITY2 (1 <<3) 320 #define MT_DENSITY3 (2 <<3) 321 #define MT_DENSITY4 (3 <<3) /* Highest density/format */ 322 #define MTMINOR(unit) ((((unit) & 0x7fc) << 5) + ((unit) & 0x3)) 323 #define MT_BSD (1 <<6) /* BSD behavior on close */ 324 #define MT_DENSITY(dev) ((getminor(dev) & MT_DENSITY_MASK) >> 3) 325 326 327 #ifdef __cplusplus 328 } 329 #endif 330 331 #endif /* _SYS_MTIO_H */ 332