man/man9e/tran_reset.9e

         te
 Copyright (c) 2005, Sun Microsystems, Inc. All Rights Reserved
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 TRAN_RESET 9E "Aug 17, 2005"
 NAME
tran_reset - reset a SCSI bus or target
 SYNOPSIS

#include <sys/scsi/scsi.h>


 int prefixtran_reset(struct scsi_address *ap, int level);


 INTERFACE LEVEL

Solaris architecture specific (Solaris DDI).
 PARAMETERS
ap

Pointer to the scsi_address(9S) structure.


level

The level of reset required.


 DESCRIPTION

The tran_reset() vector in the scsi_hba_tran(9S) structure must be
initialized during the HBA driver's attach(9E) to point to an
HBA entry point to be called when a target driver calls
scsi_reset(9F).

tran_reset() must reset either the SCSI bus, a SCSI target
device, or a SCSI logical unit as specified by level.

level must be one of the following:
RESET_ALL

Reset the SCSI bus.


RESET_TARGET

Reset the target specified by ap.


RESET_LUN

Reset the logical unit specified by ap.


tran_reset should set the pkt_reason field of all outstanding
packets in the transport layer associated with each target or logical unit that
was successfully reset to CMD_RESET and the pkt_statistics field
must be OR'ed with either STAT_BUS_RESET (if the SCSI bus was
reset) or STAT_DEV_RESET (if the target or logical unit was reset).

The HBA driver should use a SCSI Bus Device Reset Message to reset
a target device. The HBA driver should use a SCSI Logical Unit Reset Message
to reset a logical unit.

Packets that are in the transport layer but not yet active on the bus should be
returned with pkt_reason set to CMD_RESET and pkt_statistics
OR'ed with STAT_ABORTED.

Support for RESET_LUN is optional but strongly encouraged for new and
updated HBA drivers. If an HBA driver provides RESET_LUN support, it must
also create the lun-reset capability with a value of zero for each target
device instance represented by a valid ap. The HBA is also required to
provide the means to return the current value of the lun-reset capability
in its tran_getcap(9E) routine, as well as the means to change the value
of the lun_reset capability in its tran_getcap(9E) routine.
 RETURN VALUES

tran_reset() should return:
1

on success.


0

on failure.


 CONTEXT

The tran_reset() function can be called from user or interrupt context.
This requirement comes from scsi_reset().
 SEE ALSO

attach(9E), ddi_dma_buf_setup(9F), scsi_hba_attach(9F),
scsi_reset(9F), scsi_address(9S), scsi_hba_tran(9S)

Writing Device Drivers
 NOTES

If pkt_reason already indicates that an earlier error had occurred for a
particular pkt, tran_reset() should not overwrite pkt_reason
with CMD_RESET.