Copyright (c) 2013, OmniTI Computer Consulting, Inc. All rights reserved.
Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved.
Copyright 1989 AT&T
Portions Copyright (c) 1992, X/Open Company Limited. All Rights Reserved.
Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at
http://www.opengroup.org/bookstore/.
The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html.
This notice shall appear on any product containing this material.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
#include <sys/types.h> #include <unistd.h> #include <fcntl.h> int fcntl(int fildes, int cmd, /* arg */ ...);
The fcntl() function provides for control over open files. The fildes argument is an open file descriptor.
The fcntl() function can take a third argument, arg, whose data type, value, and use depend upon the value of cmd. The cmd argument specifies the operation to be performed by fcntl().
The values for cmd are defined in <fcntl.h> and include: F_DUPFD
Return a new file descriptor which is the lowest numbered available (that is, not already open) file descriptor greater than or equal to the third argument, arg, taken as an integer of type int. The new file descriptor refers to the same open file description as the original file descriptor, and shares any locks. The FD_CLOEXEC flag associated with the new file descriptor is cleared to keep the file open across calls to one of the exec(2) functions.
Similar to F_DUPFD, but always returns arg. F_DUP2FD closes arg if it is open and not equal to fildes. F_DUP2FD is equivalent to dup2(fildes, arg).
Similar to F_DUPFD except that instead of clearing FD_CLOEXEC it is explicitly set on the returned file descriptor.
Similar to F_DUP2FD with two exceptions. The FD_CLOEXEC flag is explicitly set on the returned file descriptor. If filedes equals arg, the call will fail setting errno to EINVAL.
Free storage space associated with a section of the ordinary file fildes. The section is specified by a variable of data type struct flock pointed to by arg. The data type struct flock is defined in the <fcntl.h> header (see fcntl.h(3HEAD)) and is described below. Note that all file systems might not support all possible variations of F_FREESP arguments. In particular, many file systems allow space to be freed only at the end of a file.
Equivalent to F_FREESP, but takes a struct flock64 argument rather than a struct flock argument.
Allocate space for a section of the ordinary file fildes. The section is specified by a variable of data type struct flock pointed to by arg. The data type struct flock is defined in the <fcntl.h> header (see fcntl.h(3HEAD) and is described below.
Equivalent to F_ALLOCSP, but takes a struct flock64 argument rather than a struct flock argument.
Get the file descriptor flags defined in <fcntl.h> that are associated with the file descriptor fildes. File descriptor flags are associated with a single file descriptor and do not affect other file descriptors that refer to the same file.
Get the file status flags and file access modes, defined in <fcntl.h>, for the file descriptor specified by fildes. The file access modes can be extracted from the return value using the mask O_ACCMODE, which is defined in <fcntl.h>. File status flags and file access modes do not affect other file descriptors that refer to the same file with different open file descriptions.
If fildes refers to a socket, get the process or process group ID specified to receive SIGURG signals when out-of-band data is available. Positive values indicate a process ID; negative values, other than -1, indicate a process group ID. If fildes does not refer to a socket, the results are unspecified.
Get the file status flags, file access modes, and file creation and assignment flags, defined in <fcntl.h>, for the file descriptor specified by fildes. The file access modes can be extracted from the return value using the mask O_ACCMODE, which is defined in <fcntl.h>. File status flags, file access modes, and file creation and assignment flags do not affect other file descriptors that refer to the same file with different open file descriptions.
Set the file descriptor flags defined in <fcntl.h>, that are associated with fildes, to the third argument, arg, taken as type int. If the FD_CLOEXEC flag in the third argument is 0, the file will remain open across the exec() functions; otherwise the file will be closed upon successful execution of one of the exec() functions.
Set the file status flags, defined in <fcntl.h>, for the file descriptor specified by fildes from the corresponding bits in the arg argument, taken as type int. Bits corresponding to the file access mode and file creation and assignment flags that are set in arg are ignored. If any bits in arg other than those mentioned here are changed by the application, the result is unspecified.
If fildes refers to a socket, set the process or process group ID specified to receive SIGURG signals when out-of-band data is available, using the value of the third argument, arg, taken as type int. Positive values indicate a process ID; negative values, other than -1, indicate a process group ID. If fildes does not refer to a socket, the results are unspecified.
The following commands are available for advisory record locking. Record locking is supported for regular files, and may be supported for other files. F_GETLK
Get the first lock which blocks the lock description pointed to by the third argument, arg, taken as a pointer to type struct flock, defined in <fcntl.h>. The information retrieved overwrites the information passed to fcntl() in the structure flock. If no lock is found that would prevent this lock from being created, then the structure will be left unchanged except for the lock type which will be set to F_UNLCK.
Equivalent to F_GETLK, but takes a struct flock64 argument rather than a struct flock argument.
Set or clear a file segment lock according to the lock description pointed to by the third argument, arg, taken as a pointer to type struct flock, defined in <fcntl.h>. F_SETLK is used to establish shared (or read) locks (F_RDLCK) or exclusive (or write) locks (F_WRLCK), as well as to remove either type of lock (F_UNLCK). F_RDLCK, F_WRLCK and F_UNLCK are defined in <fcntl.h>. If a shared or exclusive lock cannot be set, fcntl() will return immediately with a return value of -1.
Equivalent to F_SETLK, but takes a struct flock64 argument rather than a struct flock argument.
This command is the same as F_SETLK except that if a shared or exclusive lock is blocked by other locks, the process will wait until the request can be satisfied. If a signal that is to be caught is received while fcntl() is waiting for a region, fcntl() will be interrupted. Upon return from the process' signal handler, fcntl() will return -1 with errno set to EINTR, and the lock operation will not be done.
Equivalent to F_SETLKW, but takes a struct flock64 argument rather than a struct flock argument.
When a shared lock is set on a segment of a file, other processes will be able to set shared locks on that segment or a portion of it. A shared lock prevents any other process from setting an exclusive lock on any portion of the protected area. A request for a shared lock will fail if the file descriptor was not opened with read access.
An exclusive lock will prevent any other process from setting a shared lock or an exclusive lock on any portion of the protected area. A request for an exclusive lock will fail if the file descriptor was not opened with write access.
The flock structure contains at least the following elements:
short l_type; /* lock operation type */ short l_whence; /* lock base indicator */ off_t l_start; /* starting offset from base */ off_t l_len; /* lock length; l_len == 0 means until end of file */ int l_sysid; /* system ID running process holding lock */ pid_t l_pid; /* process ID of process holding lock */
The value of l_whence is SEEK_SET, SEEK_CUR, or SEEK_END, to indicate that the relative offset l_start bytes will be measured from the start of the file, current position or end of the file, respectively. The value of l_len is the number of consecutive bytes to be locked. The value of l_len may be negative (where the definition of off_t permits negative values of l_len). After a successful F_GETLK or F_GETLK64 request, that is, one in which a lock was found, the value of l_whence will be SEEK_SET.
The l_pid and l_sysid fields are used only with F_GETLK or F_GETLK64 to return the process ID of the process holding a blocking lock and to indicate which system is running that process.
If l_len is positive, the area affected starts at l_start and ends at l_start + l_len - 1. If l_len is negative, the area affected starts at l_start + l_len and ends at l_start - 1. Locks may start and extend beyond the current end of a file, but must not be negative relative to the beginning of the file. A lock will be set to extend to the largest possible value of the file offset for that file by setting l_len to 0. If such a lock also has l_start set to 0 and l_whence is set to SEEK_SET, the whole file will be locked.
If a process has an existing lock in which l_len is 0 and which includes the last byte of the requested segment, and an unlock (F_UNLCK) request is made in which l_len is non-zero and the offset of the last byte of the requested segment is the maximum value for an object of type off_t, then the F_UNLCK request will be treated as a request to unlock from the start of the requested segment with an l_len equal to 0. Otherwise, the request will attempt to unlock only the requested segment.
There will be at most one type of lock set for each byte in the file. Before a successful return from an F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64 request when the calling process has previously existing locks on bytes in the region specified by the request, the previous lock type for each byte in the specified region will be replaced by the new lock type. As specified above under the descriptions of shared locks and exclusive locks, an F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64 request will (respectively) fail or block when another process has existing locks on bytes in the specified region and the type of any of those locks conflicts with the type specified in the request.
All locks associated with a file for a given process are removed when a file descriptor for that file is closed by that process or the process holding that file descriptor terminates. Locks are not inherited by a child process created using fork(2).
A potential for deadlock occurs if a process controlling a locked region is put to sleep by attempting to lock another process' locked region. If the system detects that sleeping until a locked region is unlocked would cause a deadlock, fcntl() will fail with an EDEADLK error.
The following values for cmd are used for file share reservations. A share reservation is placed on an entire file to allow cooperating processes to control access to the file. F_SHARE
Sets a share reservation on a file with the specified access mode and designates which types of access to deny.
Remove an existing share reservation.
File share reservations are an advisory form of access control among cooperating processes, on both local and remote machines. They are most often used by DOS or Windows emulators and DOS based NFS clients. However, native UNIX versions of DOS or Windows applications may also choose to use this form of access control.
A share reservation is described by an fshare structure defined in <sys/fcntl.h>, which is included in <fcntl.h> as follows:
typedef struct fshare {
short f_access;
short f_deny;
int f_id;
} fshare_t;
A share reservation specifies the type of access, f_access, to be requested on the open file descriptor. If access is granted, it further specifies what type of access to deny other processes, f_deny. A single process on the same file may hold multiple non-conflicting reservations by specifying an identifier, f_id, unique to the process, with each request.
An F_UNSHARE request releases the reservation with the specified f_id. The f_access and f_deny fields are ignored.
Valid f_access values are: F_RDACC
Set a file share reservation for read-only access.
Set a file share reservation for write-only access.
Set a file share reservation for read and write access.
Valid f_deny values are: F_COMPAT
Set a file share reservation to compatibility mode.
Set a file share reservation to deny read access to other processes.
Set a file share reservation to deny write access to other processes.
Set a file share reservation to deny read and write access to other processes.
Do not deny read or write access to any other process.
Upon successful completion, the value returned depends on cmd as follows: F_DUPFD
A new file descriptor.
Value of 0.
Value of flags defined in <fcntl.h>. The return value will not be negative.
Value of file status flags and access modes. The return value will not be negative.
Value other than -1.
Value other than -1.
Value of the socket owner process or process group; this will not be -1.
Value of file status flags, access modes, and creation and assignment flags. The return value will not be negative.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Value other than -1.
Otherwise, -1 is returned and errno is set to indicate the error.
The fcntl() function will fail if: EAGAIN
The cmd argument is F_SETLK or F_SETLK64, the type of lock (l_type) is a shared (F_RDLCK) or exclusive (F_WRLCK) lock, and the segment of a file to be locked is already exclusive-locked by another process; or the type is an exclusive lock and some portion of the segment of a file to be locked is already shared-locked or exclusive-locked by another process. The cmd argument is F_FREESP, the file exists, mandatory file/record locking is set, and there are outstanding record locks on the file; or the cmd argument is F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64, mandatory file/record locking is set, and the file is currently being mapped to virtual memory using mmap(2). The cmd argument is F_SHARE and f_access conflicts with an existing f_deny share reservation.
The fildes argument is not a valid open file descriptor; or the cmd argument is F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64, the type of lock, l_type, is a shared lock (F_RDLCK), and fildes is not a valid file descriptor open for reading; or the type of lock l_type is an exclusive lock (F_WRLCK) and fildes is not a valid file descriptor open for writing. The cmd argument is F_FREESP and fildes is not a valid file descriptor open for writing. The cmd argument is F_DUP2FD, and arg is negative or is not less than the current resource limit for RLIMIT_NOFILE. The cmd argument is F_SHARE, the f_access share reservation is for write access, and fildes is not a valid file descriptor open for writing. The cmd argument is F_SHARE, the f_access share reservation is for read access, and fildes is not a valid file descriptor open for reading.
The cmd argument is F_GETLK, F_GETLK64, F_SETLK, F_SETLK64, F_SETLKW, F_SETLKW64, or F_FREESP and the arg argument points to an illegal address. The cmd argument is F_SHARE or F_UNSHARE and arg points to an illegal address.
The cmd argument is F_SETLKW or F_SETLKW64 and the function was interrupted by a signal.
The cmd argument is invalid or not supported by the file system; or the cmd argument is F_DUPFD and arg is negative or greater than or equal to OPEN_MAX; or the cmd argument is F_GETLK, F_GETLK64, F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64 and the data pointed to by arg is not valid; or fildes refers to a file that does not support locking. The cmd argument is F_UNSHARE and a reservation with this f_id for this process does not exist. The cmd argument is F_DUP2FD_CLOEXEC and fildes is equal to arg.
An I/O error occurred while reading from or writing to the file system.
The cmd argument is F_DUPFD and either OPEN_MAX file descriptors are currently open in the calling process, or no file descriptors greater than or equal to arg are available.
The cmd argument is F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64 and satisfying the lock or unlock request would result in the number of locked regions in the system exceeding a system-imposed limit.
Either the fildes argument is on a remote machine and the link to that machine is no longer active; or the cmd argument is F_FREESP, the file is on a remote machine, and the link to that machine is no longer active.
One of the values to be returned cannot be represented correctly. The cmd argument is F_GETLK, F_SETLK, or F_SETLKW and the smallest or, if l_len is non-zero, the largest, offset of any byte in the requested segment cannot be represented correctly in an object of type off_t. The cmd argument is F_GETLK64, F_SETLK64, or F_SETLKW64 and the smallest or, if l_len is non-zero, the largest, offset of any byte in the requested segment cannot be represented correctly in an object of type off64_t.
The fcntl() function may fail if: EAGAIN
The cmd argument is F_SETLK, F_SETLK64, F_SETLKW, or F_SETLKW64, and the file is currently being mapped to virtual memory using mmap(2).
The cmd argument is F_SETLKW or F_SETLKW64, the lock is blocked by some lock from another process and putting the calling process to sleep, waiting for that lock to become free would cause a deadlock. The cmd argument is F_FREESP, mandatory record locking is enabled, O_NDELAY and O_NONBLOCK are clear and a deadlock condition was detected.
See attributes(5) for descriptions of the following attributes:
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| Interface Stability Standard |
| MT-Level Async-Signal Safe |
lockd(1M), chmod(2), close(2), creat(2), dup(2), exec(2), fork(2), mmap(2), open(2), pipe(2), read(2), sigaction(2), write(2), dup2(3C), fcntl.h(3HEAD), attributes(5), standards(5)
Programming Interfaces Guide
In the past, the variable errno was set to EACCES rather than EAGAIN when a section of a file is already locked by another process. Therefore, portable application programs should expect and test for either value.
Advisory locks allow cooperating processes to perform consistent operations on files, but do not guarantee exclusive access. Files can be accessed without advisory locks, but inconsistencies may result. The network share locking protocol does not support the f_deny value of F_COMPAT. For network file systems, if f_access is F_RDACC, f_deny is mapped to F_RDDNY. Otherwise, it is mapped to F_RWDNY.
To prevent possible file corruption, the system may reject mmap() requests for advisory locked files, or it may reject advisory locking requests for mapped files. Applications that require a file be both locked and mapped should lock the entire file (l_start and l_len both set to 0). If a file is mapped, the system may reject an unlock request, resulting in a lock that does not cover the entire file.
The process ID returned for locked files on network file systems might not be meaningful.
If the file server crashes and has to be rebooted, the lock manager (see lockd(1M)) attempts to recover all locks that were associated with that server. If a lock cannot be reclaimed, the process that held the lock is issued a SIGLOST signal.