Copyright (c) 2013 Gary Mills
Copyright (c) 2006, 2009 Sun Microsystems, Inc. All Rights Reserved.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with
the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
prstat [-acHJLmRrtTvWZ] [-d u | d] [-C psrsetlist] [-h lgrplist] [-j projlist] [-k tasklist] [-n ntop[,nbottom]] [-p pidlist] [-P cpulist] [-s key | -S key ] [-u euidlist] [-U uidlist] [-z zoneidlist] [interval [count]]
The prstat utility iteratively examines all active processes on the system and reports statistics based on the selected output mode and sort order. prstat provides options to examine only processes matching specified PIDs, UIDs, zone IDs, CPU IDs, and processor set IDs.
The -j, -k, -C, -p, -P, -u, -U, and -z options accept lists as arguments. Items in a list can be either separated by commas or enclosed in quotes and separated by commas or spaces.
If you do not specify an option, prstat examines all processes and reports statistics sorted by CPU usage.
The following options are supported: -a
Report information about processes and users. In this mode prstat displays separate reports about processes and users at the same time.
Print new reports below previous reports instead of overprinting them. Long names are not truncated in this mode.
Report only processes or lwps that are bound to processor sets in the given list. Each processor set is identified by an integer as reported by psrset(1M). The load averages displayed are the sum of the load averages of the specified processor sets (see pset_getloadavg(3C)). Processes with one or more LWPs bound to processor sets in the given list are reported even when the -L option is not used.
Specify u for a printed representation of the internal representation of time. See time(2). Specify d for standard date format. See date(1).
Report only processes or lwps whose home lgroup is in the given list of lgroups. No processes or lwps will be listed for invalid lgroups.
Report information about home lgroup. In this mode, prstat adds an extra column showing process or lwps home lgroup with the header LGRP.
Report only processes or lwps whose project ID is in the given list. Each project ID can be specified as either a project name or a numerical project ID. See project(4).
Report information about processes and projects. In this mode prstat displays separate reports about processes and projects at the same time. A trailing asterisk marks a long name that has been truncated to fit the column.
Report only processes or lwps whose task ID is in tasklist.
Report statistics for each light-weight process (LWP). By default, prstat reports only the number of LWPs for each process.
Report microstate process accounting information. In addition to all fields listed in -v mode, this mode also includes the percentage of time the process has spent processing system traps, text page faults, data page faults, waiting for user locks and waiting for CPU (latency time).
Restrict number of output lines. The ntop argument determines how many lines of process or lwp statistics are reported, and the nbottom argument determines how many lines of user, task, project or zone statistics are reported if the -a, -t, -T, -J or -Z options are specified. By default, prstat displays as many lines of output that fit in a window or terminal. When you specify the -c option or direct the output to a file, the default values for ntop and nbottom are 15 and 5.
Report only processes whose process ID is in the given list.
Report only processes or lwps which have most recently executed on a CPU in the given list. Each CPU is identified by an integer as reported by psrinfo(1M).
Put prstat in the real time scheduling class. When this option is used, prstat is given priority over time-sharing and interactive processes. This option is available only for superuser.
Disable lookups for user names and project names. (Note that this does not apply to lookups for the -j, -u, or -U options.)
Sort output lines (that is, processes, lwps, or users) by key in descending order. Only one key can be used as an argument. There are five possible key values: cpu
Sort by process CPU usage. This is the default.
Sort by process priority.
Sort by resident set size.
Sort by size of process image.
Sort by process execution time.
Sort output lines by key in ascending order. Possible key values are the same as for the -s option. See -s.
Report total usage summary for each user. The summary includes the total number of processes or LWPs owned by the user, total size of process images, total resident set size, total cpu time, and percentages of recent cpu time and system memory.
Report information about processes and tasks. In this mode prstat displays separate reports about processes and tasks at the same time.
Report only processes whose effective user ID is in the given list. Each user ID may be specified as either a login name or a numerical user ID.
Report only processes whose real user ID is in the given list. Each user ID may be specified as either a login name or a numerical user ID.
Report verbose process usage. This output format includes the percentage of time the process has spent in user mode, in system mode, and sleeping. It also includes the number of voluntary and involuntary context switches, system calls and the number of signals received. Statistics that are not reported are marked with the - sign.
Truncate long names even when prstat would normally print them in full. A trailing asterisk marks a long name that has been truncated to fit the column.
Report only processes or LWPs whose zone ID is in the given list. Each zone ID can be specified as either a zone name or a numerical zone ID. See zones(5).
Report information about processes and zones. In this mode, prstat displays separate reports about processes and zones at the same time. A trailing asterisk marks a long name that has been truncated to fit the column.
The following list defines the column headings and the meanings of a prstat report: PID
The process ID of the process.
The real user (login) name or real user ID. A trailing asterisk marks a long name that has been truncated to fit the column.
The total virtual memory size of the process, including all mapped files and devices, in kilobytes (K), megabytes (M), or gigabytes (G).
The resident set size of the process (RSS), in kilobytes (K), megabytes (M), or gigabytes (G). The RSS value is an estimate provided by proc(4) that might underestimate the actual resident set size. Users who want to get more accurate usage information for capacity planning should use the -x option to pmap(1) instead.
The state of the process: cpuN
Process is running on CPU N.
Sleeping: process is waiting for an event to complete.
Waiting: process is waiting for CPU usage to drop to the CPU-caps enforced limits. See the description of CPU-caps in resource_controls(5).
Runnable: process in on run queue.
Zombie state: process terminated and parent not waiting.
Process is stopped.
The priority of the process. Larger numbers mean higher priority.
Nice value used in priority computation. Only processes in certain scheduling classes have a nice value.
The cumulative execution time for the process.
The percentage of recent CPU time used by the process. If executing in a non-global zone and the pools facility is active, the percentage will be that of the processors in the processor set in use by the pool to which the zone is bound.
The name of the process (name of executed file).
The lwp ID of the lwp being reported.
The number of lwps in the process.
With the some options, in addition to a number of the column headings shown above, there are: NPROC
Number of processes in a specified collection.
Percentage of memory used by a specified collection of processes.
The following columns are displayed when the -v or -m option is specified USR
The percentage of time the process has spent in user mode.
The percentage of time the process has spent in system mode.
The percentage of time the process has spent in processing system traps.
The percentage of time the process has spent processing text page faults.
The percentage of time the process has spent processing data page faults.
The percentage of time the process has spent waiting for user locks.
The percentage of time the process has spent sleeping.
The percentage of time the process has spent waiting for CPU.
The number of voluntary context switches.
The number of involuntary context switches.
The number of system calls.
The number of signals received.
Under the -L option, one line is printed for each lwp in the process and some reporting fields show the values for the lwp, not the process.
The following column is displayed when the -H option is specified: LGRP
The home lgroup of the process or lwp.
The following operands are supported: count
Specifies the number of times that the statistics are repeated. By default, prstat reports statistics until a termination signal is received.
Specifies the sampling interval in seconds; the default interval is 5 seconds.
Example 1 Reporting the Five Most Active Super-User Processes
The following command reports the five most active super-user processes running on CPU1 and CPU2:
example% prstat -u root -n 5 -P 1,2 1 1 PID USERNAME SWAP RSS STATE PRI NICE TIME CPU PROCESS/LWP 306 root 3024K 1448K sleep 58 0 0:00.00 0.3% sendmail/1 102 root 1600K 592K sleep 59 0 0:00.00 0.1% in.rdisc/1 250 root 1000K 552K sleep 58 0 0:00.00 0.0% utmpd/1 288 root 1720K 1032K sleep 58 0 0:00.00 0.0% sac/1 1 root 744K 168K sleep 58 0 0:00.00 0.0% init/1 TOTAL: 25, load averages: 0.05, 0.08, 0.12
Example 2 Displaying Verbose Process Usage Information
The following command displays verbose process usage information about processes with lowest resident set sizes owned by users root and john.
example% prstat -S rss -n 5 -vc -u root,john PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWP 1 root 0.0 0.0 - - - - 100 - 0 0 0 0 init/1 102 root 0.0 0.0 - - - - 100 - 0 0 3 0 in.rdisc/1 250 root 0.0 0.0 - - - - 100 - 0 0 0 0 utmpd/1 1185 john 0.0 0.0 - - - - 100 - 0 0 0 0 csh/1 240 root 0.0 0.0 - - - - 100 - 0 0 0 0 powerd/4 TOTAL: 71, load averages: 0.02, 0.04, 0.08
The following exit values are returned: 0
Successful completion.
An error occurred.
date(1), lgrpinfo(1), plgrp(1), proc(1), ps(1), time(2), psrinfo(1M), psrset(1M), sar(1M), pset_getloadavg(3C), proc(4), project(4), attributes(5), resource_controls(5), zones(5)
The snapshot of system usage displayed by prstat is true only for a split-second, and it may not be accurate by the time it is displayed. When the -m option is specified, prstat tries to turn on microstate accounting for each process; the original state is restored when prstat exits. See proc(4) for additional information about the microstate accounting facility.
The total memory size reported in the SWAP and RSS columns for groups of processes can sometimes overestimate the actual amount of memory used by processes with shared memory segments.