xref: /titanic_50/usr/src/cmd/power/handlers.c (revision dfb96a4f56fb431b915bc67e5d9d5c8d4f4f6679)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include "pmconfig.h"
29 #include <sys/mkdev.h>
30 #include <sys/syslog.h>
31 #include <sys/openpromio.h>
32 #include <sys/mnttab.h>
33 #include <syslog.h>
34 #include <stdlib.h>
35 
36 
37 #define	STRCPYLIM(dst, src, str) strcpy_limit(dst, src, sizeof (dst), str)
38 #define	LASTBYTE(str) (str + strlen(str) - 1)
39 
40 static char nerr_fmt[] = "number is out of range (%s)\n";
41 static char alloc_fmt[] = "cannot allocate space for \"%s\", %s\n";
42 static char set_thresh_fmt[] = "error setting threshold(s) for \"%s\", %s\n";
43 static char bad_thresh_fmt[] = "bad threshold(s)\n";
44 static char stat_fmt[] = "cannot stat \"%s\", %s\n";
45 static char always_on[] = "always-on";
46 
47 /*
48  * When lines in a config file (usually "/etc/power.conf") start with
49  * a recognized keyword, a "handler" routine is called for specific
50  * CPR or PM -related action(s).  Each routine returns a status code
51  * indicating whether all tasks were successful; if any errors occured,
52  * future CPR or PM updates are skipped.  Following are the handler
53  * routines for all keywords:
54  */
55 
56 
57 /*
58  * Check for valid cpupm behavior and communicate it to the kernel.
59  */
60 int
61 cpupm(void)
62 {
63 	struct btoc {
64 		char *behavior;
65 		int cmd;
66 		int Errno;
67 	};
68 	static struct btoc blist[] = {
69 		"disable",	PM_STOP_CPUPM, EINVAL,
70 		"enable",	PM_START_CPUPM, EBUSY,
71 		NULL,		0, 0
72 	};
73 	struct btoc *bp;
74 	char *behavior;
75 
76 	for (behavior = LINEARG(1), bp = blist; bp->cmd; bp++) {
77 		if (strcmp(behavior, bp->behavior) == 0)
78 			break;
79 	}
80 	if (bp->cmd == 0) {
81 		mesg(MERR, "invalid cpupm behavior \"%s\"\n", behavior);
82 		return (NOUP);
83 	}
84 	if (ioctl(pm_fd, bp->cmd, NULL) == -1 && errno != bp->Errno) {
85 		mesg(MERR, "cpupm %s failed, %s\n",
86 		    behavior, strerror(errno));
87 		return (NOUP);
88 	}
89 	return (OKUP);
90 }
91 
92 
93 /*
94  * Check for valid autopm behavior and save after ioctl success.
95  */
96 int
97 autopm(void)
98 {
99 	struct btoc {
100 		char *behavior;
101 		int cmd, Errno, isdef;
102 	};
103 	static struct btoc blist[] = {
104 		"default",	PM_START_PM,	EBUSY,	1,
105 		"disable",	PM_STOP_PM,	EINVAL,	0,
106 		"enable",	PM_START_PM,	EBUSY,	0,
107 		NULL,		0,		0,	0,
108 	};
109 	struct btoc *bp;
110 	char *behavior;
111 
112 	for (behavior = LINEARG(1), bp = blist; bp->cmd; bp++) {
113 		if (strcmp(behavior, bp->behavior) == 0)
114 			break;
115 	}
116 	if (bp->cmd == 0) {
117 		mesg(MERR, "invalid autopm behavior \"%s\"\n", behavior);
118 		return (NOUP);
119 	}
120 
121 	/*
122 	 * for "default" behavior, do not enable autopm if not ESTAR_V3
123 	 */
124 	if (!bp->isdef || (estar_vers == ESTAR_V3)) {
125 		if (ioctl(pm_fd, bp->cmd, NULL) == -1 && errno != bp->Errno) {
126 			mesg(MERR, "autopm %s failed, %s\n",
127 			    behavior, strerror(errno));
128 			return (NOUP);
129 		}
130 	}
131 	(void) strcpy(new_cc.apm_behavior, behavior);
132 	return (OKUP);
133 }
134 
135 
136 static int
137 gethm(char *src, int *hour, int *min)
138 {
139 	if (sscanf(src, "%d:%d", hour, min) != 2) {
140 		mesg(MERR, "bad time format (%s)\n", src);
141 		return (-1);
142 	}
143 	return (0);
144 }
145 
146 
147 static void
148 strcpy_limit(char *dst, char *src, size_t limit, char *info)
149 {
150 	if (strlcpy(dst, src, limit) >= limit)
151 		mesg(MEXIT, "%s is too long (%s)\n", info, src);
152 }
153 
154 
155 /*
156  * Convert autoshutdown idle and start/finish times;
157  * check and record autoshutdown behavior.
158  */
159 int
160 autosd(void)
161 {
162 	char **bp, *behavior;
163 	char *unrec = gettext("unrecognized autoshutdown behavior");
164 	static char *blist[] = {
165 		"autowakeup", "default", "noshutdown",
166 		"shutdown", "unconfigured", NULL
167 	};
168 
169 	new_cc.as_idle = atoi(LINEARG(1));
170 	if (gethm(LINEARG(2), &new_cc.as_sh, &new_cc.as_sm) ||
171 	    gethm(LINEARG(3), &new_cc.as_fh, &new_cc.as_fm))
172 		return (NOUP);
173 	mesg(MDEBUG, "idle %d, start %d:%02d, finish %d:%02d\n",
174 	    new_cc.as_idle, new_cc.as_sh, new_cc.as_sm,
175 	    new_cc.as_fh, new_cc.as_fm);
176 
177 	for (behavior = LINEARG(4), bp = blist; *bp; bp++) {
178 		if (strcmp(behavior, *bp) == 0)
179 			break;
180 	}
181 	if (*bp == NULL) {
182 		mesg(MERR, "%s: \"%s\"\n", unrec, behavior);
183 		return (NOUP);
184 	}
185 	STRCPYLIM(new_cc.as_behavior, *bp, unrec);
186 	return (OKUP);
187 }
188 
189 
190 /*
191  * Check for a real device and try to resolve to a full path.
192  * The orig/resolved path may be modified into a prom pathname,
193  * and an allocated copy of the result is stored at *destp;
194  * the caller will need to free that space.  Returns 1 for any
195  * error, otherwise 0; also sets *errp after an alloc error.
196  */
197 static int
198 devpath(char **destp, char *src, int *errp)
199 {
200 	struct stat stbuf;
201 	char buf[PATH_MAX];
202 	char *cp, *dstr;
203 	int devok, dcs = 0;
204 	size_t len;
205 
206 	/*
207 	 * When there's a real device, try to resolve the path
208 	 * and trim the leading "/devices" component.
209 	 */
210 	if ((devok = (stat(src, &stbuf) == 0 && stbuf.st_rdev)) != 0) {
211 		if (realpath(src, buf) == NULL) {
212 			mesg(MERR, "realpath cannot resolve \"%s\"\n",
213 			    src, strerror(errno));
214 			return (1);
215 		}
216 		src = buf;
217 		dstr = "/devices";
218 		len = strlen(dstr);
219 		dcs = (strncmp(src, dstr, len) == 0);
220 		if (dcs)
221 			src += len;
222 	} else
223 		mesg(MDEBUG, stat_fmt, src, strerror(errno));
224 
225 	/*
226 	 * When the path has ":anything", display an error for
227 	 * a non-device or truncate a resolved+modifed path.
228 	 */
229 	if (cp = strchr(src, ':')) {
230 		if (devok == 0) {
231 			mesg(MERR, "physical path may not contain "
232 			    "a minor string (%s)\n", src);
233 			return (1);
234 		} else if (dcs)
235 			*cp = '\0';
236 	}
237 
238 	if ((*destp = strdup(src)) == NULL) {
239 		*errp = NOUP;
240 		mesg(MERR, alloc_fmt, src, strerror(errno));
241 	}
242 	return (*destp == NULL);
243 }
244 
245 
246 /*
247  * Call pm ioctl request(s) to set property/device dependencies.
248  */
249 static int
250 dev_dep_common(int isprop)
251 {
252 	int cmd, argn, upval = OKUP;
253 	char *src, *first, **destp;
254 	pm_req_t pmreq;
255 
256 	bzero(&pmreq, sizeof (pmreq));
257 	src = LINEARG(1);
258 	if (isprop) {
259 		cmd = PM_ADD_DEPENDENT_PROPERTY;
260 		first = NULL;
261 		pmreq.pmreq_kept = src;
262 	} else {
263 		cmd = PM_ADD_DEPENDENT;
264 		if (devpath(&first, src, &upval))
265 			return (upval);
266 		pmreq.pmreq_kept = first;
267 	}
268 	destp = &pmreq.pmreq_keeper;
269 
270 	/*
271 	 * Now loop through any dependents.
272 	 */
273 	for (argn = 2; (src = LINEARG(argn)) != NULL; argn++) {
274 		if (devpath(destp, src, &upval)) {
275 			if (upval != OKUP)
276 				return (upval);
277 			break;
278 		}
279 		if ((upval = ioctl(pm_fd, cmd, &pmreq)) == -1) {
280 			mesg(MDEBUG, "pm ioctl, cmd %d, errno %d\n"
281 			    "kept \"%s\", keeper \"%s\"\n",
282 			    cmd, errno, pmreq.pmreq_kept, pmreq.pmreq_keeper);
283 			mesg(MERR, "cannot set \"%s\" dependency "
284 			    "for \"%s\", %s\n", pmreq.pmreq_keeper,
285 			    pmreq.pmreq_kept, strerror(errno));
286 		}
287 		free(*destp);
288 		*destp = NULL;
289 		if (upval != OKUP)
290 			break;
291 	}
292 
293 	free(first);
294 	return (upval);
295 }
296 
297 
298 int
299 ddprop(void)
300 {
301 	return (dev_dep_common(1));
302 }
303 
304 
305 int
306 devdep(void)
307 {
308 	return (dev_dep_common(0));
309 }
310 
311 
312 /*
313  * Convert a numeric string (with a possible trailing scaling byte)
314  * into an integer.  Returns a converted value and *nerrp unchanged,
315  * or 0 with *nerrp set to 1 for a conversion error.
316  */
317 static int
318 get_scaled_value(char *str, int *nerrp)
319 {
320 	longlong_t svalue = 0, factor = 1;
321 	char *sp;
322 
323 	errno = 0;
324 	svalue = strtol(str, &sp, 0);
325 	if (errno || (*str != '-' && (*str < '0' || *str > '9')))
326 		*nerrp = 1;
327 	else if (sp && *sp != '\0') {
328 		if (*sp == 'h')
329 			factor = 3600;
330 		else if (*sp == 'm')
331 			factor = 60;
332 		else if (*sp != 's')
333 			*nerrp = 1;
334 	}
335 	/* any bytes following sp are ignored */
336 
337 	if (*nerrp == 0) {
338 		svalue *= factor;
339 		if (svalue < INT_MIN || svalue > INT_MAX)
340 			*nerrp = 1;
341 	}
342 	if (*nerrp)
343 		mesg(MERR, nerr_fmt, str);
344 	mesg(MDEBUG, "got scaled value %d\n", (int)svalue);
345 	return ((int)svalue);
346 }
347 
348 
349 /*
350  * Increment the count of threshold values,
351  * reallocate *vlistp and append another element.
352  * Returns 1 on error, otherwise 0.
353  */
354 static int
355 vlist_append(int **vlistp, int *vcntp, int value)
356 {
357 	(*vcntp)++;
358 	if (*vlistp = realloc(*vlistp, *vcntp * sizeof (**vlistp)))
359 		*(*vlistp + *vcntp - 1) = value;
360 	else
361 		mesg(MERR, alloc_fmt, "threshold list", strerror(errno));
362 	return (*vlistp == NULL);
363 }
364 
365 
366 /*
367  * Convert a single threshold string or paren groups of thresh's as
368  * described below.  All thresh's are saved to an allocated list at
369  * *vlistp; the caller will need to free that space.  On return:
370  * *vcntp is the count of the vlist array, and vlist is either
371  * a single thresh or N groups of thresh's with a trailing zero:
372  * (cnt_1 thr_1a thr_1b [...]) ... (cnt_N thr_Na thr_Nb [...]) 0.
373  * Returns 0 when all conversions were OK, and 1 for any syntax,
374  * conversion, or alloc error.
375  */
376 static int
377 get_thresh(int **vlistp, int *vcntp)
378 {
379 	int argn, value, gci, grp_cnt = 0, paren = 0, nerr = 0;
380 	char *rp, *src;
381 
382 	for (argn = 2; (src = LINEARG(argn)) != NULL; argn++) {
383 		if (*src == LPAREN) {
384 			gci = *vcntp;
385 			if (nerr = vlist_append(vlistp, vcntp, 0))
386 				break;
387 			paren = 1;
388 			src++;
389 		}
390 		if (*(rp = LASTBYTE(src)) == RPAREN) {
391 			if (paren) {
392 				grp_cnt = *vcntp - gci;
393 				*(*vlistp + gci) = grp_cnt;
394 				paren = 0;
395 				*rp = '\0';
396 			} else {
397 				nerr = 1;
398 				break;
399 			}
400 		}
401 
402 		value = get_scaled_value(src, &nerr);
403 		if (nerr || (nerr = vlist_append(vlistp, vcntp, value)))
404 			break;
405 	}
406 
407 	if (nerr == 0 && grp_cnt)
408 		nerr = vlist_append(vlistp, vcntp, 0);
409 	return (nerr);
410 }
411 
412 
413 /*
414  * Set device thresholds from (3) formats:
415  * 	path	"always-on"
416  * 	path	time-spec: [0-9]+[{h,m,s}]
417  *	path	(ts1 ts2 ...)+
418  */
419 int
420 devthr(void)
421 {
422 	int cmd, upval = OKUP, nthresh = 0, *vlist = NULL;
423 	pm_req_t pmreq;
424 
425 	bzero(&pmreq, sizeof (pmreq));
426 	if (devpath(&pmreq.physpath, LINEARG(1), &upval))
427 		return (upval);
428 
429 	if (strcmp(LINEARG(2), always_on) == 0) {
430 		cmd = PM_SET_DEVICE_THRESHOLD;
431 		pmreq.value = INT_MAX;
432 	} else if (get_thresh(&vlist, &nthresh)) {
433 		mesg(MERR, bad_thresh_fmt);
434 		upval = NOUP;
435 	} else if (nthresh == 1) {
436 		pmreq.value = *vlist;
437 		cmd = PM_SET_DEVICE_THRESHOLD;
438 	} else {
439 		pmreq.data = vlist;
440 		pmreq.datasize = (nthresh * sizeof (*vlist));
441 		cmd = PM_SET_COMPONENT_THRESHOLDS;
442 	}
443 
444 	if (upval != NOUP && (upval = ioctl(pm_fd, cmd, &pmreq)) == -1)
445 		mesg(MERR, set_thresh_fmt, pmreq.physpath, strerror(errno));
446 
447 	free(vlist);
448 	free(pmreq.physpath);
449 	return (upval);
450 }
451 
452 
453 static int
454 scan_int(char *src, int *dst)
455 {
456 	long lval;
457 
458 	errno = 0;
459 
460 	lval = strtol(LINEARG(1), NULL, 0);
461 	if (errno || lval > INT_MAX || lval < 0) {
462 		mesg(MERR, nerr_fmt, src);
463 		return (NOUP);
464 	}
465 
466 	*dst = (int)lval;
467 	return (OKUP);
468 }
469 
470 static int
471 scan_float(char *src, float *dst)
472 {
473 	float fval;
474 
475 	errno = 0;
476 
477 	fval = strtof(src, NULL);
478 	if (errno || fval < 0.0) {
479 		mesg(MERR, nerr_fmt, src);
480 		return (NOUP);
481 	}
482 
483 	*dst = fval;
484 	return (OKUP);
485 }
486 
487 
488 int
489 dreads(void)
490 {
491 	return (scan_int(LINEARG(1), &new_cc.diskreads_thold));
492 }
493 
494 
495 /*
496  * Set pathname for idlecheck;
497  * an overflowed pathname is treated as a fatal error.
498  */
499 int
500 idlechk(void)
501 {
502 	STRCPYLIM(new_cc.idlecheck_path, LINEARG(1), "idle path");
503 	return (OKUP);
504 }
505 
506 
507 int
508 loadavg(void)
509 {
510 	return (scan_float(LINEARG(1), &new_cc.loadaverage_thold));
511 }
512 
513 
514 int
515 nfsreq(void)
516 {
517 	return (scan_int(LINEARG(1), &new_cc.nfsreqs_thold));
518 }
519 
520 
521 #ifdef sparc
522 static char open_fmt[] = "cannot open \"%s\", %s\n";
523 
524 /*
525  * Verify the filesystem type for a regular statefile is "ufs"
526  * or verify a block device is not in use as a mounted filesytem.
527  * Returns 1 if any error, otherwise 0.
528  */
529 static int
530 check_mount(char *sfile, dev_t sfdev, int ufs)
531 {
532 	char *src, *err_fmt = NULL, *mnttab = MNTTAB;
533 	int rgent, match = 0;
534 	struct extmnttab ent;
535 	FILE *fp;
536 
537 	if ((fp = fopen(mnttab, "r")) == NULL) {
538 		mesg(MERR, open_fmt, mnttab, strerror(errno));
539 		return (1);
540 	}
541 
542 	/*
543 	 * Search for a matching dev_t;
544 	 * ignore non-ufs filesystems for a regular statefile.
545 	 */
546 	while ((rgent = getextmntent(fp, &ent, sizeof (ent))) != -1) {
547 		if (rgent > 0) {
548 			mesg(MERR, "error reading \"%s\"\n", mnttab);
549 			(void) fclose(fp);
550 			return (1);
551 		} else if (ufs && strcmp(ent.mnt_fstype, "ufs"))
552 			continue;
553 		else if (makedev(ent.mnt_major, ent.mnt_minor) == sfdev) {
554 			match = 1;
555 			break;
556 		}
557 	}
558 	(void) fclose(fp);
559 
560 	/*
561 	 * No match is needed for a block device statefile,
562 	 * a match is needed for a regular statefile.
563 	 */
564 	if (match == 0) {
565 		if (new_cc.cf_type == CFT_SPEC)
566 			STRCPYLIM(new_cc.cf_devfs, sfile, "block statefile");
567 		else
568 			err_fmt = "cannot find ufs mount point for \"%s\"\n";
569 	} else if (new_cc.cf_type == CFT_UFS) {
570 		STRCPYLIM(new_cc.cf_fs, ent.mnt_mountp, "mnt entry");
571 		STRCPYLIM(new_cc.cf_devfs, ent.mnt_special, "mnt special");
572 		while (*(sfile + 1) == '/') sfile++;
573 		src = sfile + strlen(ent.mnt_mountp);
574 		while (*src == '/') src++;
575 		STRCPYLIM(new_cc.cf_path, src, "statefile path");
576 	} else
577 		err_fmt = "statefile device \"%s\" is a mounted filesystem\n";
578 	if (err_fmt)
579 		mesg(MERR, err_fmt, sfile);
580 	return (err_fmt != NULL);
581 }
582 
583 
584 /*
585  * Convert a Unix device to a prom device and save on success,
586  * log any ioctl/conversion error.
587  */
588 static int
589 utop(void)
590 {
591 	union obpbuf {
592 		char	buf[OBP_MAXPATHLEN + sizeof (uint_t)];
593 		struct	openpromio oppio;
594 	};
595 	union obpbuf oppbuf;
596 	struct openpromio *opp;
597 	char *promdev = "/dev/openprom";
598 	int fd, upval;
599 
600 	if ((fd = open(promdev, O_RDONLY)) == -1) {
601 		mesg(MERR, open_fmt, promdev, strerror(errno));
602 		return (NOUP);
603 	}
604 
605 	opp = &oppbuf.oppio;
606 	opp->oprom_size = OBP_MAXPATHLEN;
607 	strcpy_limit(opp->oprom_array, new_cc.cf_devfs,
608 	    OBP_MAXPATHLEN, "statefile device");
609 	upval = ioctl(fd, OPROMDEV2PROMNAME, opp);
610 	(void) close(fd);
611 	if (upval == OKUP)
612 		STRCPYLIM(new_cc.cf_dev_prom, opp->oprom_array, "prom device");
613 	else {
614 		openlog("pmconfig", 0, LOG_DAEMON);
615 		syslog(LOG_NOTICE,
616 		    gettext("cannot convert \"%s\" to prom device"),
617 		    new_cc.cf_devfs);
618 		closelog();
619 	}
620 
621 	return (upval);
622 }
623 
624 
625 /*
626  * Check for a valid statefile pathname, inode and mount status.
627  */
628 int
629 sfpath(void)
630 {
631 	static int statefile;
632 	char *err_fmt = NULL;
633 	char *sfile, *sp, ch;
634 	struct stat stbuf;
635 	int dir = 0;
636 	dev_t dev;
637 
638 	if (statefile) {
639 		mesg(MERR, "ignored redundant statefile entry\n");
640 		return (OKUP);
641 	} else if (ua_err) {
642 		if (ua_err != ENOTSUP)
643 			mesg(MERR, "uadmin(A_FREEZE, A_CHECK, 0): %s\n",
644 			    strerror(ua_err));
645 		return (NOUP);
646 	}
647 
648 	/*
649 	 * Check for an absolute path and trim any trailing '/'.
650 	 */
651 	sfile = LINEARG(1);
652 	if (*sfile != '/') {
653 		mesg(MERR, "statefile requires an absolute path\n");
654 		return (NOUP);
655 	}
656 	for (sp = sfile + strlen(sfile) - 1; sp > sfile && *sp == '/'; sp--)
657 		*sp = '\0';
658 
659 	/*
660 	 * If the statefile doesn't exist, the leading path must be a dir.
661 	 */
662 	if (stat(sfile, &stbuf) == -1) {
663 		if (errno == ENOENT) {
664 			dir = 1;
665 			if ((sp = strrchr(sfile, '/')) == sfile)
666 				sp++;
667 			ch = *sp;
668 			*sp = '\0';
669 			if (stat(sfile, &stbuf) == -1)
670 				err_fmt = stat_fmt;
671 			*sp = ch;
672 		} else
673 			err_fmt = stat_fmt;
674 		if (err_fmt) {
675 			mesg(MERR, err_fmt, sfile, strerror(errno));
676 			return (NOUP);
677 		}
678 	}
679 
680 	/*
681 	 * Check for regular/dir/block types, set cf_type and dev.
682 	 */
683 	if (S_ISREG(stbuf.st_mode) || (dir && S_ISDIR(stbuf.st_mode))) {
684 		new_cc.cf_type = CFT_UFS;
685 		dev = stbuf.st_dev;
686 	} else if (S_ISBLK(stbuf.st_mode)) {
687 		if (minor(stbuf.st_rdev) != 2) {
688 			new_cc.cf_type = CFT_SPEC;
689 			dev = stbuf.st_rdev;
690 		} else
691 			err_fmt = "statefile device cannot be slice 2 (%s)\n"
692 			    "would clobber the disk label and boot-block\n";
693 	} else
694 		err_fmt = "bad file type for \"%s\"\n"
695 		    "statefile must be a regular file or block device\n";
696 	if (err_fmt) {
697 		mesg(MERR, err_fmt, sfile);
698 		return (NOUP);
699 	}
700 
701 	if (check_mount(sfile, dev, (new_cc.cf_type == CFT_UFS)) || utop())
702 		return (NOUP);
703 	new_cc.cf_magic = CPR_CONFIG_MAGIC;
704 	statefile = 1;
705 	return (OKUP);
706 }
707 #endif /* sparc */
708 
709 
710 /*
711  * Common function to set a system or cpu threshold.
712  */
713 static int
714 cmnthr(int req)
715 {
716 	int value, nerr = 0, upval = OKUP;
717 	char *thresh = LINEARG(1);
718 
719 	if (strcmp(thresh, always_on) == 0)
720 		value = INT_MAX;
721 	else if ((value = get_scaled_value(thresh, &nerr)) < 0 || nerr) {
722 		mesg(MERR, "%s must be a positive value\n", LINEARG(0));
723 		upval = NOUP;
724 	}
725 	if (upval == OKUP)
726 		(void) ioctl(pm_fd, req, value);
727 	return (upval);
728 }
729 
730 
731 /*
732  * Try setting system threshold.
733  */
734 int
735 systhr(void)
736 {
737 	return (cmnthr(PM_SET_SYSTEM_THRESHOLD));
738 }
739 
740 
741 /*
742  * Try setting cpu threshold.
743  */
744 int
745 cputhr(void)
746 {
747 	return (cmnthr(PM_SET_CPU_THRESHOLD));
748 }
749 
750 
751 int
752 tchars(void)
753 {
754 	return (scan_int(LINEARG(1), &new_cc.ttychars_thold));
755 }
756