1#!/bin/sh 2# 3# ident "%Z%%M% %I% %E% SMI" 4# 5# CDDL HEADER START 6# 7# The contents of this file are subject to the terms of the 8# Common Development and Distribution License (the "License"). 9# You may not use this file except in compliance with the License. 10# 11# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 12# or http://www.opensolaris.org/os/licensing. 13# See the License for the specific language governing permissions 14# and limitations under the License. 15# 16# When distributing Covered Code, include this CDDL HEADER in each 17# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 18# If applicable, add the following below this CDDL HEADER, with the 19# fields enclosed by brackets "[]" replaced with your own identifying 20# information: Portions Copyright [yyyy] [name of copyright owner] 21# 22# CDDL HEADER END 23# 24# 25# idsconfig -- script to setup iDS 5.x/6.x for Native LDAP II. 26# 27# Copyright 2007 Sun Microsystems, Inc. All rights reserved. 28# Use is subject to license terms. 29# 30 31# 32# display_msg(): Displays message corresponding to the tag passed in. 33# 34display_msg() 35{ 36 case "$1" in 37 usage) cat <<EOF 38 $PROG: [ -v ] [ -i input file ] [ -o output file ] 39 i <input file> Get setup info from input file. 40 o <output file> Generate a server configuration output file. 41 v Verbose mode 42EOF 43 ;; 44 backup_server) cat <<EOF 45It is strongly recommended that you BACKUP the directory server 46before running $PROG. 47 48Hit Ctrl-C at any time before the final confirmation to exit. 49 50EOF 51 ;; 52 setup_complete) cat <<EOF 53 54$PROG: Setup of iDS server ${IDS_SERVER} is complete. 55 56EOF 57 ;; 58 display_vlv_list) cat <<EOF 59 60Note: idsconfig has created entries for VLV indexes. Use the 61 directoryserver(1m) script on ${IDS_SERVER} to stop 62 the server and then enter the following vlvindex 63 sub-commands to create the actual VLV indexes: 64 65EOF 66 ;; 67 cred_level_menu) cat <<EOF 68The following are the supported credential levels: 69 1 anonymous 70 2 proxy 71 3 proxy anonymous 72 4 self 73 5 self proxy 74 6 self proxy anonymous 75EOF 76 ;; 77 auth_method_menu) cat <<EOF 78The following are the supported Authentication Methods: 79 1 none 80 2 simple 81 3 sasl/DIGEST-MD5 82 4 tls:simple 83 5 tls:sasl/DIGEST-MD5 84 6 sasl/GSSAPI 85EOF 86 ;; 87 srvauth_method_menu) cat <<EOF 88The following are the supported Authentication Methods: 89 1 simple 90 2 sasl/DIGEST-MD5 91 3 tls:simple 92 4 tls:sasl/DIGEST-MD5 93 5 sasl/GSSAPI 94EOF 95 ;; 96 prompt_ssd_menu) cat <<EOF 97 A Add a Service Search Descriptor 98 D Delete a SSD 99 M Modify a SSD 100 P Display all SSD's 101 H Help 102 X Clear all SSD's 103 104 Q Exit menu 105EOF 106 ;; 107 summary_menu) 108 109 SUFFIX_INFO= 110 DB_INFO= 111 112 [ -n "${NEED_CREATE_SUFFIX}" ] && 113 { 114 SUFFIX_INFO=`cat <<EOF 115 116 Suffix to create : $LDAP_SUFFIX 117EOF 118` 119 [ -n "${NEED_CREATE_BACKEND}" ] && 120 DB_INFO=`cat <<EOF 121 122 Database to create : $IDS_DATABASE 123EOF 124` 125 } 126 127 cat <<EOF 128 Summary of Configuration 129 130 1 Domain to serve : $LDAP_DOMAIN 131 2 Base DN to setup : $LDAP_BASEDN$SUFFIX_INFO$DB_INFO 132 3 Profile name to create : $LDAP_PROFILE_NAME 133 4 Default Server List : $LDAP_SERVER_LIST 134 5 Preferred Server List : $LDAP_PREF_SRVLIST 135 6 Default Search Scope : $LDAP_SEARCH_SCOPE 136 7 Credential Level : $LDAP_CRED_LEVEL 137 8 Authentication Method : $LDAP_AUTHMETHOD 138 9 Enable Follow Referrals : $LDAP_FOLLOWREF 139 10 iDS Time Limit : $IDS_TIMELIMIT 140 11 iDS Size Limit : $IDS_SIZELIMIT 141 12 Enable crypt password storage : $NEED_CRYPT 142 13 Service Auth Method pam_ldap : $LDAP_SRV_AUTHMETHOD_PAM 143 14 Service Auth Method keyserv : $LDAP_SRV_AUTHMETHOD_KEY 144 15 Service Auth Method passwd-cmd: $LDAP_SRV_AUTHMETHOD_CMD 145 16 Search Time Limit : $LDAP_SEARCH_TIME_LIMIT 146 17 Profile Time to Live : $LDAP_PROFILE_TTL 147 18 Bind Limit : $LDAP_BIND_LIMIT 148 19 Service Search Descriptors Menu 149 150EOF 151 ;; 152 sfx_not_suitable) cat <<EOF 153 154Sorry, suffix ${LDAP_SUFFIX} is not suitable for Base DN ${LDAP_BASEDN} 155 156EOF 157 ;; 158 obj_not_found) cat <<EOF 159 160Sorry, ${PROG} can't find an objectclass for "$_ATT" attribute 161 162EOF 163 ;; 164 sfx_config_incons) cat <<EOF 165 166Sorry, there is no suffix mapping for ${LDAP_SUFFIX}, 167while ldbm database exists, server configuration needs to be fixed manually, 168look at cn=mapping tree,cn=config and cn=ldbm database,cn=plugins,cn=config 169 170EOF 171 ;; 172 ldbm_db_exist) cat <<EOF 173 174Database "${IDS_DATABASE}" already exists, 175however "${IDS_DATABASE_AVAIL}" name is available 176 177EOF 178 ;; 179 unable_find_db_name) cat <<EOF 180 181Unable to find any available database name close to "${IDS_DATABASE}" 182 183EOF 184 ;; 185 create_ldbm_db_error) cat <<EOF 186 187ERROR: unable to create suffix ${LDAP_SUFFIX} 188 due to server error that occurred during creation of ldbm database 189 190EOF 191 ;; 192 create_suffix_entry_error) cat <<EOF 193 194ERROR: unable to create entry ${LDAP_SUFFIX} of ${LDAP_SUFFIX_OBJ} class 195 196EOF 197 ;; 198 ldap_suffix_list) cat <<EOF 199 200No valid suffixes (naming contexts) were found for LDAP base DN: 201${LDAP_BASEDN} 202 203Available suffixes are: 204${LDAP_SUFFIX_LIST} 205 206EOF 207 ;; 208 sorry) cat <<EOF 209 210HELP - No help is available for this topic. 211 212EOF 213 ;; 214 create_suffix_help) cat <<EOF 215 216HELP - Our Base DN is ${LDAP_BASEDN} 217 and we need to create a Directory Suffix, 218 which can be equal to Base DN itself or be any of Base DN parents. 219 All intermediate entries up to suffix will be created on demand. 220 221EOF 222 ;; 223 enter_ldbm_db_help) cat <<EOF 224 225HELP - ldbm database is an internal database for storage of our suffix data. 226 Database name must be alphanumeric due to Directory Server restriction. 227 228EOF 229 ;; 230 backup_help) cat <<EOF 231 232HELP - Since idsconfig modifies the directory server configuration, 233 it is strongly recommended that you backup the server prior 234 to running this utility. This is especially true if the server 235 being configured is a production server. 236 237EOF 238 ;; 239 port_help) cat <<EOF 240 241HELP - Enter the port number the directory server is configured to 242 use for LDAP. 243 244EOF 245 ;; 246 domain_help) cat <<EOF 247 248HELP - This is the DNS domain name this server will be serving. You 249 must provide this name even if the server is not going to be populated 250 with hostnames. Any unqualified hostname stored in the directory 251 will be fully qualified using this DNS domain name. 252 253EOF 254 ;; 255 basedn_help) cat <<EOF 256 257HELP - This parameter defines the default location in the directory tree for 258 the naming services entries. You can override this default by using 259 serviceSearchDescriptors (SSD). You will be given the option to set up 260 an SSD later on in the setup. 261 262EOF 263 ;; 264 profile_help) cat <<EOF 265 266HELP - Name of the configuration profile with which the clients will be 267 configured. A directory server can store various profiles for multiple 268 groups of clients. The initialization tool, (ldapclient(1M)), assumes 269 "default" unless another is specified. 270 271EOF 272 ;; 273 def_srvlist_help) cat <<EOF 274 275HELP - Provide a list of directory servers to serve clients using this profile. 276 All these servers should contain consistent data and provide similar 277 functionality. This list is not ordered, and clients might change the 278 order given in this list. Note that this is a space separated list of 279 *IP addresses* (not host names). Providing port numbers is optional. 280 281EOF 282 ;; 283 pref_srvlist_help) cat <<EOF 284 285HELP - Provide a list of directory servers to serve this client profile. 286 Unlike the default server list, which is not ordered, the preferred 287 servers must be entered IN THE ORDER you wish to have them contacted. 288 If you do specify a preferred server list, clients will always contact 289 them before attempting to contact any of the servers on the default 290 server list. Note that you must enter the preferred server list as a 291 space-separated list of *IP addresses* (not host names). Providing port 292 numbers is optional. 293 294EOF 295 ;; 296 srch_scope_help) cat <<EOF 297 298HELP - Default search scope to be used for all searches unless they are 299 overwritten using serviceSearchDescriptors. The valid options 300 are "one", which would specify the search will only be performed 301 at the base DN for the given service, or "sub", which would specify 302 the search will be performed through *all* levels below the base DN 303 for the given service. 304 305EOF 306 ;; 307 cred_lvl_help) cat <<EOF 308 309HELP - This parameter defines what credentials the clients use to 310 authenticate to the directory server. This list might contain 311 multiple credential levels and is ordered. If a proxy level 312 is configured, you will also be prompted to enter a bind DN 313 for the proxy agent along with a password. This proxy agent 314 will be created if it does not exist. 315 316EOF 317 ;; 318 auth_help) cat <<EOF 319 320HELP - The default authentication method(s) to be used by all services 321 in the client using this profile. This is a ordered list of 322 authentication methods separated by a ';'. The supported methods 323 are provided in a menu. Note that sasl/DIGEST-MD5 binds require 324 passwords to be stored un-encrypted on the server. 325 326EOF 327 ;; 328 srvauth_help) cat <<EOF 329 330HELP - The authentication methods to be used by a given service. Currently 331 3 services support this feature: pam_ldap, keyserv, and passwd-cmd. 332 The authentication method specified in this attribute overrides 333 the default authentication method defined in the profile. This 334 feature can be used to select stronger authentication methods for 335 services which require increased security. 336 337EOF 338 ;; 339 pam_ldap_help) cat <<EOF 340 341HELP - The authentication method(s) to be used by pam_ldap when contacting 342 the directory server. This is a ordered list, and, if provided, will 343 override the default authentication method parameter. 344 345EOF 346 ;; 347 keyserv_help) cat <<EOF 348 349HELP - The authentication method(s) to be used by newkey(1M) and chkey(1) 350 when contacting the directory server. This is a ordered list and 351 if provided will override the default authentication method 352 parameter. 353 354EOF 355 ;; 356 passwd-cmd_help) cat <<EOF 357 358HELP - The authentication method(s) to be used by passwd(1) command when 359 contacting the directory server. This is a ordered list and if 360 provided will override the default authentication method parameter. 361 362EOF 363 ;; 364 referrals_help) cat <<EOF 365 366HELP - This parameter indicates whether the client should follow 367 ldap referrals if it encounters one during naming lookups. 368 369EOF 370 ;; 371 tlim_help) cat <<EOF 372 373HELP - The server time limit value indicates the maximum amount of time the 374 server would spend on a query from the client before abandoning it. 375 A value of '-1' indicates no limit. 376 377EOF 378 ;; 379 slim_help) cat <<EOF 380 381HELP - The server sizelimit value indicates the maximum number of entries 382 the server would return in respond to a query from the client. A 383 value of '-1' indicates no limit. 384 385EOF 386 ;; 387 crypt_help) cat <<EOF 388 389HELP - By default iDS does not store userPassword attribute values using 390 unix "crypt" format. If you need to keep your passwords in the crypt 391 format for NIS/NIS+ and pam_unix compatibility, choose 'yes'. If 392 passwords are stored using any other format than crypt, pam_ldap 393 MUST be used by clients to authenticate users to the system. Note 394 that if you wish to use sasl/DIGEST-MD5 in conjunction with pam_ldap, 395 user passwords must be stored in the clear format. 396 397EOF 398 ;; 399 srchtime_help) cat <<EOF 400 401HELP - The search time limit the client will enforce for directory 402 lookups. 403 404EOF 405 ;; 406 profttl_help) cat <<EOF 407 408HELP - The time to live value for profile. The client will refresh its 409 cached version of the configuration profile at this TTL interval. 410 411EOF 412 ;; 413 bindlim_help) cat <<EOF 414 415HELP - The time limit for the bind operation to the directory. This 416 value controls the responsiveness of the client in case a server 417 becomes unavailable. The smallest timeout value for a given 418 network architecture/conditions would work best. This is very 419 similar to setting TCP timeout, but only for LDAP bind operation. 420 421EOF 422 ;; 423 ssd_help) cat <<EOF 424 425HELP - Using Service Search Descriptors (SSD), you can override the 426 default configuration for a given service. The SSD can be 427 used to override the default search base DN, the default search 428 scope, and the default search filter to be used for directory 429 lookups. SSD are supported for all services (databases) 430 defined in nsswitch.conf(4). The default base DN is defined 431 in ldap(1). 432 433 Note: SSD are powerful tools in defining configuration profiles 434 and provide a great deal of flexibility. However, care 435 must be taken in creating them. If you decide to make use 436 of SSDs, consult the documentation first. 437 438EOF 439 ;; 440 ssd_menu_help) cat <<EOF 441 442HELP - Using this menu SSD can be added, updated, or deleted from 443 the profile. 444 445 A - This option creates a new SSD by prompting for the 446 service name, base DN, and scope. Service name is 447 any valid service as defined in ldap(1). base is 448 either the distinguished name to the container where 449 this service will use, or a relative DN followed 450 by a ','. 451 D - Delete a previously created SSD. 452 M - Modify a previously created SSD. 453 P - Display a list of all the previously created SSD. 454 X - Delete all of the previously created SSD. 455 456 Q - Exit the menu and continue with the server configuration. 457 458EOF 459 ;; 460 ldap_suffix_list_help) cat <<EOF 461 462HELP - No valid suffixes (naming contexts) are available on server 463 ${IDS_SERVER}:${IDS_PORT}. 464 You must set an LDAP Base DN that can be contained in 465 an existing suffix. 466 467EOF 468 ;; 469 esac 470} 471 472 473# 474# get_ans(): gets an answer from the user. 475# $1 instruction/comment/description/question 476# $2 default value 477# 478get_ans() 479{ 480 if [ -z "$2" ] 481 then 482 ${ECHO} "$1 \c" 483 else 484 ${ECHO} "$1 [$2] \c" 485 fi 486 487 read ANS 488 if [ -z "$ANS" ] 489 then 490 ANS=$2 491 fi 492} 493 494 495# 496# get_ans_req(): gets an answer (required) from the user, NULL value not allowed. 497# $@ instruction/comment/description/question 498# 499get_ans_req() 500{ 501 ANS="" # Set ANS to NULL. 502 while [ "$ANS" = "" ] 503 do 504 get_ans "$@" 505 [ "$ANS" = "" ] && ${ECHO} "NULL value not allowed!" 506 done 507} 508 509 510# 511# get_number(): Querys and verifies that number entered is numeric. 512# Function will repeat prompt user for number value. 513# $1 Message text. 514# $2 default value. 515# $3 Help argument. 516# 517get_number() 518{ 519 ANS="" # Set ANS to NULL. 520 NUM="" 521 522 get_ans "$1" "$2" 523 524 # Verify that value is numeric. 525 while not_numeric $ANS 526 do 527 case "$ANS" in 528 [Hh] | help | Help | \?) display_msg ${3:-sorry} ;; 529 * ) ${ECHO} "Invalid value: \"${ANS}\". \c" 530 ;; 531 esac 532 # Get a new value. 533 get_ans "Enter a numeric value:" "$2" 534 done 535 NUM=$ANS 536} 537 538 539# 540# get_negone_num(): Only allows a -1 or positive integer. 541# Used for values where -1 has special meaning. 542# 543# $1 - Prompt message. 544# $2 - Default value (require). 545# $3 - Optional help argument. 546get_negone_num() 547{ 548 while : 549 do 550 get_number "$1" "$2" "$3" 551 if is_negative $ANS 552 then 553 if [ "$ANS" = "-1" ]; then 554 break # -1 is OK, so break. 555 else # Need to re-enter number. 556 ${ECHO} "Invalid number: please enter -1 or positive number." 557 fi 558 else 559 break # Positive number 560 fi 561 done 562} 563 564 565# 566# get_passwd(): Reads a password from the user and verify with second. 567# $@ instruction/comment/description/question 568# 569get_passwd() 570{ 571 [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd()" 572 573 # Temporary PASSWD variables 574 _PASS1="" 575 _PASS2="" 576 577 /usr/bin/stty -echo # Turn echo OFF 578 579 # Endless loop that continues until passwd and re-entered passwd 580 # match. 581 while : 582 do 583 ANS="" # Set ANS to NULL. 584 585 # Don't allow NULL for first try. 586 while [ "$ANS" = "" ] 587 do 588 get_ans "$@" 589 [ "$ANS" = "" ] && ${ECHO} "" && ${ECHO} "NULL passwd not allowed!" 590 done 591 _PASS1=$ANS # Store first try. 592 593 # Get second try. 594 ${ECHO} "" 595 get_ans "Re-enter passwd:" 596 _PASS2=$ANS 597 598 # Test if passwords are identical. 599 if [ "$_PASS1" = "$_PASS2" ]; then 600 break 601 fi 602 603 # Move cursor down to next line and print ERROR message. 604 ${ECHO} "" 605 ${ECHO} "ERROR: passwords don't match; try again." 606 done 607 608 /usr/bin/stty echo # Turn echo ON 609 610 ${ECHO} "" 611} 612 613 614# 615# get_passwd_nochk(): Reads a password from the user w/o check. 616# $@ instruction/comment/description/question 617# 618get_passwd_nochk() 619{ 620 [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd_nochk()" 621 622 /usr/bin/stty -echo # Turn echo OFF 623 624 get_ans "$@" 625 626 /usr/bin/stty echo # Turn echo ON 627 628 ${ECHO} "" 629} 630 631 632# 633# get_menu_choice(): Get a menu choice from user. Continue prompting 634# till the choice is in required range. 635# $1 .. Message text. 636# $2 .. min value 637# $3 .. max value 638# $4 .. OPTIONAL: default value 639# 640# Return value: 641# MN_CH will contain the value selected. 642# 643get_menu_choice() 644{ 645 # Check for req parameter. 646 if [ $# -lt 3 ]; then 647 ${ECHO} "get_menu_choice(): Did not get required parameters." 648 return 1 649 fi 650 651 while : 652 do 653 get_ans "$1" "$4" 654 MN_CH=$ANS 655 is_negative $MN_CH 656 if [ $? -eq 1 ]; then 657 if [ $MN_CH -ge $2 ]; then 658 if [ $MN_CH -le $3 ]; then 659 return 660 fi 661 fi 662 fi 663 ${ECHO} "Invalid choice: $MN_CH" 664 done 665} 666 667 668# 669# get_confirm(): Get confirmation from the user. (Y/Yes or N/No) 670# $1 - Message 671# $2 - default value. 672# 673get_confirm() 674{ 675 _ANSWER= 676 677 while : 678 do 679 # Display Internal ERROR if $2 not set. 680 if [ -z "$2" ] 681 then 682 ${ECHO} "INTERNAL ERROR: get_confirm requires 2 args, 3rd is optional." 683 exit 2 684 fi 685 686 # Display prompt. 687 ${ECHO} "$1 [$2] \c" 688 689 # Get the ANSWER. 690 read _ANSWER 691 if [ "$_ANSWER" = "" ] && [ -n "$2" ] ; then 692 _ANSWER=$2 693 fi 694 case "$_ANSWER" in 695 [Yy] | yes | Yes | YES) return 1 ;; 696 [Nn] | no | No | NO) return 0 ;; 697 [Hh] | help | Help | \?) display_msg ${3:-sorry};; 698 * ) ${ECHO} "Please enter y or n." ;; 699 esac 700 done 701} 702 703 704# 705# get_confirm_nodef(): Get confirmation from the user. (Y/Yes or N/No) 706# No default value supported. 707# 708get_confirm_nodef() 709{ 710 _ANSWER= 711 712 while : 713 do 714 ${ECHO} "$@ \c" 715 read _ANSWER 716 case "$_ANSWER" in 717 [Yy] | yes | Yes | YES) return 1 ;; 718 [Nn] | no | No | NO) return 0 ;; 719 * ) ${ECHO} "Please enter y or n." ;; 720 esac 721 done 722} 723 724 725# 726# is_numeric(): Tells is a string is numeric. 727# 0 = Numeric 728# 1 = NOT Numeric 729# 730is_numeric() 731{ 732 # Check for parameter. 733 if [ $# -ne 1 ]; then 734 return 1 735 fi 736 737 # Determine if numeric. 738 expr "$1" + 1 > /dev/null 2>&1 739 if [ $? -ge 2 ]; then 740 return 1 741 fi 742 743 # Made it here, it's Numeric. 744 return 0 745} 746 747 748# 749# not_numeric(): Reverses the return values of is_numeric. Useful 750# for if and while statements that want to test for 751# non-numeric data. 752# 0 = NOT Numeric 753# 1 = Numeric 754# 755not_numeric() 756{ 757 is_numeric $1 758 if [ $? -eq 0 ]; then 759 return 1 760 else 761 return 0 762 fi 763} 764 765 766# 767# is_negative(): Tells is a Numeric value is less than zero. 768# 0 = Negative Numeric 769# 1 = Positive Numeric 770# 2 = NOT Numeric 771# 772is_negative() 773{ 774 # Check for parameter. 775 if [ $# -ne 1 ]; then 776 return 1 777 fi 778 779 # Determine if numeric. Can't use expr because -0 is 780 # considered positive?? 781 if is_numeric $1; then 782 case "$1" in 783 -*) return 0 ;; # Negative Numeric 784 *) return 1 ;; # Positive Numeric 785 esac 786 else 787 return 2 788 fi 789} 790 791 792# 793# check_domainname(): check validity of a domain name. Currently we check 794# that it has at least two components. 795# $1 the domain name to be checked 796# 797check_domainname() 798{ 799 if [ ! -z "$1" ] 800 then 801 t=`expr "$1" : '[^.]\{1,\}[.][^.]\{1,\}'` 802 if [ "$t" = 0 ] 803 then 804 return 1 805 fi 806 fi 807 return 0 808} 809 810 811# 812# check_baseDN(): check validity of the baseDN name. 813# $1 the baseDN name to be checked 814# 815# NOTE: The check_baseDN function does not catch all invalid DN's. 816# Its purpose is to reduce the number of invalid DN's to 817# get past the input routine. The invalid DN's will be 818# caught by the LDAP server when they are attempted to be 819# created. 820# 821check_baseDN() 822{ 823 ck_DN=$1 824 ${ECHO} " Checking LDAP Base DN ..." 825 if [ ! -z "$ck_DN" ]; then 826 [ $DEBUG -eq 1 ] && ${ECHO} "Checking baseDN: $ck_DN" 827 # Check for = (assignment operator) 828 ${ECHO} "$ck_DN" | ${GREP} "=" > /dev/null 2>&1 829 if [ $? -ne 0 ]; then 830 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: No '=' in baseDN." 831 return 1 832 fi 833 834 # Check all keys. 835 while : 836 do 837 # Get first key. 838 dkey=`${ECHO} $ck_DN | cut -d'=' -f1` 839 840 # Check that the key string is valid 841 check_attrName $dkey 842 if [ $? -ne 0 ]; then 843 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: invalid key=${dkey}" 844 return 1 845 fi 846 847 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: valid key=${dkey}" 848 849 # Remove first key from DN 850 ck_DN=`${ECHO} $ck_DN | cut -s -d',' -f2-` 851 852 # Break loop if nothing left. 853 if [ "$ck_DN" = "" ]; then 854 break 855 fi 856 done 857 fi 858 return 0 859} 860 861 862# 863# domain_2_dc(): Convert a domain name into dc string. 864# $1 .. Domain name. 865# 866domain_2_dc() 867{ 868 _DOM=$1 # Domain parameter. 869 _DOM_2_DC="" # Return value from function. 870 _FIRST=1 # Flag for first time. 871 872 export _DOM_2_DC # Make visible for others. 873 874 # Convert "."'s to spaces for "for" loop. 875 domtmp="`${ECHO} ${_DOM} | tr '.' ' '`" 876 for i in $domtmp; do 877 if [ $_FIRST -eq 1 ]; then 878 _DOM_2_DC="dc=${i}" 879 _FIRST=0 880 else 881 _DOM_2_DC="${_DOM_2_DC},dc=${i}" 882 fi 883 done 884} 885 886 887# 888# is_root_user(): Check to see if logged in as root user. 889# 890is_root_user() 891{ 892 case `id` in 893 uid=0\(root\)*) return 0 ;; 894 * ) return 1 ;; 895 esac 896} 897 898 899# 900# parse_arg(): Parses the command line arguments and sets the 901# appropriate variables. 902# 903parse_arg() 904{ 905 while getopts "dvhi:o:" ARG 906 do 907 case $ARG in 908 d) DEBUG=1;; 909 v) VERB="";; 910 i) INPUT_FILE=$OPTARG;; 911 o) OUTPUT_FILE=$OPTARG;; 912 \?) display_msg usage 913 exit 1;; 914 *) ${ECHO} "**ERROR: Supported option missing handler!" 915 display_msg usage 916 exit 1;; 917 esac 918 done 919 return `expr $OPTIND - 1` 920} 921 922 923# 924# init(): initializes variables and options 925# 926init() 927{ 928 # General variables. 929 PROG=`basename $0` # Program name 930 PID=$$ # Program ID 931 VERB='> /dev/null 2>&1' # NULL or "> /dev/null" 932 ECHO="/bin/echo" # print message on screen 933 EVAL="eval" # eval or echo 934 EGREP="/usr/bin/egrep" 935 GREP="/usr/bin/grep" 936 DEBUG=0 # Set Debug OFF 937 BACKUP=no_ldap # backup suffix 938 HOST="" # NULL or <hostname> 939 NAWK="/usr/bin/nawk" 940 941 DOM="" # Set to NULL 942 # If DNS domain (resolv.conf) exists use that, otherwise use domainname. 943 if [ -f /etc/resolv.conf ]; then 944 DOM=`/usr/xpg4/bin/grep -i -E '^domain|^search' /etc/resolv.conf \ 945 | awk '{ print $2 }' | tail -1` 946 fi 947 948 # If for any reason the DOM did not get set (error'd resolv.conf) set 949 # DOM to the domainname command's output. 950 if [ "$DOM" = "" ]; then 951 DOM=`domainname` # domain from domainname command. 952 fi 953 954 STEP=1 955 INTERACTIVE=1 # 0 = on, 1 = off (For input file mode) 956 DEL_OLD_PROFILE=0 # 0 (default), 1 = delete old profile. 957 958 # idsconfig specific variables. 959 INPUT_FILE="" 960 OUTPUT_FILE="" 961 NEED_PROXY=0 # 0 = No Proxy, 1 = Create Proxy. 962 LDAP_PROXYAGENT="" 963 LDAP_SUFFIX="" 964 LDAP_DOMAIN=$DOM # domainname on Server (default value) 965 GEN_CMD="" 966 967 # LDAP COMMANDS 968 LDAPSEARCH="/bin/ldapsearch -r" 969 LDAPMODIFY=/bin/ldapmodify 970 LDAPADD=/bin/ldapadd 971 LDAPDELETE=/bin/ldapdelete 972 LDAP_GEN_PROFILE=/usr/sbin/ldap_gen_profile 973 974 # iDS specific information 975 IDS_SERVER="" 976 IDS_PORT=389 977 NEED_TIME=0 978 NEED_SIZE=0 979 NEED_SRVAUTH_PAM=0 980 NEED_SRVAUTH_KEY=0 981 NEED_SRVAUTH_CMD=0 982 IDS_TIMELIMIT="" 983 IDS_SIZELIMIT="" 984 985 # LDAP PROFILE related defaults 986 LDAP_ROOTDN="cn=Directory Manager" # Provide common default. 987 LDAP_ROOTPWD="" # NULL passwd as default (i.e. invalid) 988 LDAP_PROFILE_NAME="default" 989 LDAP_BASEDN="" 990 LDAP_SERVER_LIST="" 991 LDAP_AUTHMETHOD="" 992 LDAP_FOLLOWREF="FALSE" 993 NEED_CRYPT="" 994 LDAP_SEARCH_SCOPE="one" 995 LDAP_SRV_AUTHMETHOD_PAM="" 996 LDAP_SRV_AUTHMETHOD_KEY="" 997 LDAP_SRV_AUTHMETHOD_CMD="" 998 LDAP_SEARCH_TIME_LIMIT=30 999 LDAP_PREF_SRVLIST="" 1000 LDAP_PROFILE_TTL=43200 1001 LDAP_CRED_LEVEL="proxy" 1002 LDAP_BIND_LIMIT=10 1003 1004 # Prevent new files from being read by group or others. 1005 umask 077 1006 1007 # Service Search Descriptors 1008 LDAP_SERV_SRCH_DES="" 1009 1010 # Set and create TMPDIR. 1011 TMPDIR="/tmp/idsconfig.${PID}" 1012 if mkdir -m 700 ${TMPDIR} 1013 then 1014 # Cleanup on exit. 1015 trap 'rm -rf ${TMPDIR}; /usr/bin/stty echo; exit' 1 2 3 6 15 1016 else 1017 echo "ERROR: unable to create a safe temporary directory." 1018 exit 1 1019 fi 1020 LDAP_ROOTPWF=${TMPDIR}/rootPWD 1021 1022 # Set the SSD file name after setting TMPDIR. 1023 SSD_FILE=${TMPDIR}/ssd_list 1024 1025 # GSSAPI setup 1026 LDAP_KRB_REALM="" 1027 LDAP_GSSAPI_PROFILE="" 1028 SCHEMA_UPDATED=0 1029 1030 export DEBUG VERB ECHO EVAL EGREP GREP STEP TMPDIR 1031 export IDS_SERVER IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST 1032 export LDAP_BASEDN LDAP_ROOTPWF 1033 export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED 1034 export NEED_PROXY 1035 export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST 1036 export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT 1037 export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT 1038 export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD 1039 export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD 1040 export LDAP_SERV_SRCH_DES SSD_FILE 1041 export GEN_CMD LDAP_KRB_REALM LDAP_GSSAPI_PROFILE SCHEMA_UPDATED 1042} 1043 1044 1045# 1046# disp_full_debug(): List of all debug variables usually interested in. 1047# Grouped to avoid MASSIVE code duplication. 1048# 1049disp_full_debug() 1050{ 1051 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SERVER = $IDS_SERVER" 1052 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_PORT = $IDS_PORT" 1053 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTDN = $LDAP_ROOTDN" 1054 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTPWD = $LDAP_ROOTPWD" 1055 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_DOMAIN = $LDAP_DOMAIN" 1056 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX = $LDAP_SUFFIX" 1057 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BASEDN = $LDAP_BASEDN" 1058 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_NAME = $LDAP_PROFILE_NAME" 1059 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERVER_LIST = $LDAP_SERVER_LIST" 1060 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PREF_SRVLIST = $LDAP_PREF_SRVLIST" 1061 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_SCOPE = $LDAP_SEARCH_SCOPE" 1062 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_CRED_LEVEL = $LDAP_CRED_LEVEL" 1063 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_AUTHMETHOD = $LDAP_AUTHMETHOD" 1064 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_FOLLOWREF = $LDAP_FOLLOWREF" 1065 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_TIMELIMIT = $IDS_TIMELIMIT" 1066 [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SIZELIMIT = $IDS_SIZELIMIT" 1067 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_CRYPT = $NEED_CRYPT" 1068 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_PAM = $NEED_SRVAUTH_PAM" 1069 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_KEY = $NEED_SRVAUTH_KEY" 1070 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_CMD = $NEED_SRVAUTH_CMD" 1071 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_PAM = $LDAP_SRV_AUTHMETHOD_PAM" 1072 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_KEY = $LDAP_SRV_AUTHMETHOD_KEY" 1073 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_CMD = $LDAP_SRV_AUTHMETHOD_CMD" 1074 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_TIME_LIMIT = $LDAP_SEARCH_TIME_LIMIT" 1075 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_TTL = $LDAP_PROFILE_TTL" 1076 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BIND_LIMIT = $LDAP_BIND_LIMIT" 1077 1078 # Only display proxy stuff if needed. 1079 if [ $NEED_PROXY -eq 1 ]; then 1080 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT = $LDAP_PROXYAGENT" 1081 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT_CRED = $LDAP_PROXYAGENT_CRED" 1082 [ $DEBUG -eq 1 ] && ${ECHO} " NEED_PROXY = $NEED_PROXY" 1083 fi 1084 1085 # Service Search Descriptors are a special case. 1086 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERV_SRCH_DES = $LDAP_SERV_SRCH_DES" 1087} 1088 1089 1090# 1091# load_config_file(): Loads the config file. 1092# 1093load_config_file() 1094{ 1095 [ $DEBUG -eq 1 ] && ${ECHO} "In load_config_file()" 1096 1097 # Remove SSD lines from input file before sourcing. 1098 # The SSD lines must be removed because some forms of the 1099 # data could cause SHELL errors. 1100 ${GREP} -v "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} > ${TMPDIR}/inputfile.noSSD 1101 1102 # Source the input file. 1103 . ${TMPDIR}/inputfile.noSSD 1104 1105 # If LDAP_SUFFIX is no set, try to utilize LDAP_TREETOP since older 1106 # config files use LDAP_TREETOP 1107 LDAP_SUFFIX="${LDAP_SUFFIX:-$LDAP_TREETOP}" 1108 1109 # Save password to temporary file. 1110 save_password 1111 1112 # Create the SSD file. 1113 create_ssd_file 1114 1115 # Display FULL debugging info. 1116 disp_full_debug 1117} 1118 1119# 1120# save_password(): Save password to temporary file. 1121# 1122save_password() 1123{ 1124 cat > ${LDAP_ROOTPWF} <<EOF 1125${LDAP_ROOTPWD} 1126EOF 1127} 1128 1129###################################################################### 1130# FUNCTIONS FOR prompt_config_info() START HERE. 1131###################################################################### 1132 1133# 1134# get_ids_server(): Prompt for iDS server name. 1135# 1136get_ids_server() 1137{ 1138 while : 1139 do 1140 # Prompt for server name. 1141 get_ans "Enter the JES Directory Server's hostname to setup:" "$IDS_SERVER" 1142 IDS_SERVER="$ANS" 1143 1144 # Ping server to see if live. If valid break out of loop. 1145 ping $IDS_SERVER > /dev/null 2>&1 1146 if [ $? -eq 0 ]; then 1147 break 1148 fi 1149 1150 # Invalid server, enter a new name. 1151 ${ECHO} "ERROR: Server '${IDS_SERVER}' is invalid or unreachable." 1152 IDS_SERVER="" 1153 done 1154 1155 # Set SERVER_ARGS and LDAP_ARGS since values might of changed. 1156 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" 1157 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" 1158 export SERVER_ARGS 1159 1160} 1161 1162# 1163# get_ids_port(): Prompt for iDS port number. 1164# 1165get_ids_port() 1166{ 1167 # Get a valid iDS port number. 1168 while : 1169 do 1170 # Enter port number. 1171 get_number "Enter the port number for iDS (h=help):" "$IDS_PORT" "port_help" 1172 IDS_PORT=$ANS 1173 # Do a simple search to check hostname and port number. 1174 # If search returns SUCCESS, break out, host and port must 1175 # be valid. 1176 ${LDAPSEARCH} -h ${IDS_SERVER} -p ${IDS_PORT} -b "" -s base "objectclass=*" > /dev/null 2>&1 1177 if [ $? -eq 0 ]; then 1178 break 1179 fi 1180 1181 # Invalid host/port pair, Re-enter. 1182 ${ECHO} "ERROR: Invalid host or port: ${IDS_SERVER}:${IDS_PORT}, Please re-enter!" 1183 get_ids_server 1184 done 1185 1186 # Set SERVER_ARGS and LDAP_ARGS since values might of changed. 1187 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" 1188 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" 1189 export SERVER_ARGS 1190} 1191 1192 1193# 1194# chk_ids_version(): Read the slapd config file and set variables 1195# 1196chk_ids_version() 1197{ 1198 [ $DEBUG -eq 1 ] && ${ECHO} "In chk_ids_version()" 1199 1200 # check iDS version number. 1201 eval "${LDAPSEARCH} ${SERVER_ARGS} -b cn=monitor -s base \"objectclass=*\" version | ${GREP} \"^version=\" | cut -f2 -d'/' | cut -f1 -d' ' > ${TMPDIR}/checkDSver 2>&1" 1202 if [ $? -ne 0 ]; then 1203 ${ECHO} "ERROR: Can not determine the version number of iDS!" 1204 exit 1 1205 fi 1206 IDS_VER=`cat ${TMPDIR}/checkDSver` 1207 IDS_MAJVER=`${ECHO} ${IDS_VER} | cut -f1 -d.` 1208 IDS_MINVER=`${ECHO} ${IDS_VER} | cut -f2 -d.` 1209 if [ "${IDS_MAJVER}" != "5" ] && [ "${IDS_MAJVER}" != "6" ]; then 1210 ${ECHO} "ERROR: $PROG only works with JES DS version 5.x and 6.x, not ${IDS_VER}." 1211 exit 1 1212 fi 1213 if [ $DEBUG -eq 1 ]; then 1214 ${ECHO} " IDS_MAJVER = $IDS_MAJVER" 1215 ${ECHO} " IDS_MINVER = $IDS_MINVER" 1216 fi 1217} 1218 1219 1220# 1221# get_dirmgr_dn(): Get the directory manger DN. 1222# 1223get_dirmgr_dn() 1224{ 1225 get_ans "Enter the directory manager DN:" "$LDAP_ROOTDN" 1226 LDAP_ROOTDN=$ANS 1227 1228 # Update ENV variables using DN. 1229 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" 1230 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" 1231 export AUTH_ARGS LDAP_ARGS 1232} 1233 1234 1235# 1236# get_dirmgr_pw(): Get the Root DN passwd. (Root DN found in slapd.conf) 1237# 1238get_dirmgr_pw() 1239{ 1240 while : 1241 do 1242 # Get passwd. 1243 get_passwd_nochk "Enter passwd for ${LDAP_ROOTDN} :" 1244 LDAP_ROOTPWD=$ANS 1245 1246 # Store password in file. 1247 save_password 1248 1249 # Update ENV variables using DN's PW. 1250 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" 1251 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" 1252 export AUTH_ARGS LDAP_ARGS 1253 1254 # Verify that ROOTDN and ROOTPWD are valid. 1255 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1" 1256 if [ $? -ne 0 ]; then 1257 eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}" 1258 if [ $? -eq 0 ]; then 1259 ${ECHO} "ERROR: Root DN passwd is invalid." 1260 else 1261 ${ECHO} "ERROR: Invalid Root DN <${LDAP_ROOTDN}>." 1262 get_dirmgr_dn 1263 fi 1264 else 1265 break # Both are valid. 1266 fi 1267 done 1268 1269 1270} 1271 1272 1273# 1274# get_domain(): Get the Domain that will be served by the LDAP server. 1275# $1 - Help argument. 1276# 1277get_domain() 1278{ 1279 # Use LDAP_DOMAIN as default. 1280 get_ans "Enter the domainname to be served (h=help):" $LDAP_DOMAIN 1281 1282 # Check domainname, and have user re-enter if not valid. 1283 check_domainname $ANS 1284 while [ $? -ne 0 ] 1285 do 1286 case "$ANS" in 1287 [Hh] | help | Help | \?) display_msg ${1:-sorry} ;; 1288 * ) ${ECHO} "Invalid domainname: \"${ANS}\"." 1289 ;; 1290 esac 1291 get_ans "Enter domainname to be served (h=help):" $DOM 1292 1293 check_domainname $ANS 1294 done 1295 1296 # Set the domainname to valid name. 1297 LDAP_DOMAIN=$ANS 1298} 1299 1300 1301# 1302# get_basedn(): Query for the Base DN. 1303# 1304get_basedn() 1305{ 1306 # Set the $_DOM_2_DC and assign to LDAP_BASEDN as default. 1307 # Then call get_basedn(). This method remakes the default 1308 # each time just in case the domain changed. 1309 domain_2_dc $LDAP_DOMAIN 1310 LDAP_BASEDN=$_DOM_2_DC 1311 1312 # Get Base DN. 1313 while : 1314 do 1315 get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}" 1316 check_baseDN "$ANS" 1317 while [ $? -ne 0 ] 1318 do 1319 case "$ANS" in 1320 [Hh] | help | Help | \?) display_msg basedn_help ;; 1321 * ) ${ECHO} "Invalid base DN: \"${ANS}\"." 1322 ;; 1323 esac 1324 1325 # Re-Enter the BaseDN 1326 get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}" 1327 check_baseDN "$ANS" 1328 done 1329 1330 # Set base DN and check its suffix 1331 LDAP_BASEDN=${ANS} 1332 check_basedn_suffix || 1333 { 1334 cleanup 1335 exit 1 1336 } 1337 1338 # suffix may need to be created, in that case get suffix from user 1339 [ -n "${NEED_CREATE_SUFFIX}" ] && 1340 { 1341 get_suffix || continue 1342 } 1343 1344 # suffix is ok, break out of the base dn inquire loop 1345 break 1346 done 1347} 1348 1349get_krb_realm() { 1350 1351 # To upper cases 1352 LDAP_KRB_REALM=`${ECHO} ${LDAP_DOMAIN} | ${NAWK} '{ print toupper($0) }'` 1353 get_ans_req "Enter Kerberos Realm:" "$LDAP_KRB_REALM" 1354 # To upper cases 1355 LDAP_KRB_REALM=`${ECHO} ${ANS} | ${NAWK} '{ print toupper($0) }'` 1356} 1357 1358# $1: DN 1359# $2: ldif file 1360add_entry_by_DN() { 1361 1362 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${1}\" -s base \"objectclass=*\" ${VERB}" 1363 if [ $? -eq 0 ]; then 1364 ${ECHO} " ${1} already exists" 1365 return 0 1366 else 1367 ${EVAL} "${LDAPADD} ${LDAP_ARGS} -f ${2} ${VERB}" 1368 if [ $? -eq 0 ]; then 1369 ${ECHO} " ${1} is added" 1370 return 0 1371 else 1372 ${ECHO} " ERROR: failed to add ${1}" 1373 return 1 1374 fi 1375 fi 1376 1377} 1378# 1379# Kerberos princiapl to DN mapping rules 1380# 1381# Add rules for host credentails and user credentials 1382# 1383add_id_mapping_rules() { 1384 1385 ${ECHO} " Adding Kerberos principal to DN mapping rules..." 1386 1387 _C_DN="cn=GSSAPI,cn=identity mapping,cn=config" 1388 ( cat << EOF 1389dn: cn=GSSAPI,cn=identity mapping,cn=config 1390objectClass: top 1391objectClass: nsContainer 1392cn: GSSAPI 1393EOF 1394) > ${TMPDIR}/GSSAPI_container.ldif 1395 1396 add_entry_by_DN "${_C_DN}" "${TMPDIR}/GSSAPI_container.ldif" 1397 if [ $? -ne 0 ]; 1398 then 1399 ${RM} ${TMPDIR}/GSSAPI_container.ldif 1400 return 1401 fi 1402 1403 _H_CN="host_auth_${LDAP_KRB_REALM}" 1404 _H_DN="cn=${_H_CN}, ${_C_DN}" 1405 ( cat << EOF 1406dn: ${_H_DN} 1407objectClass: top 1408objectClass: nsContainer 1409objectClass: dsIdentityMapping 1410objectClass: dsPatternMatching 1411cn: ${_H_CN} 1412dsMatching-pattern: \${Principal} 1413dsMatching-regexp: host\/(.*).${LDAP_DOMAIN}@${LDAP_KRB_REALM} 1414dsSearchBaseDN: ou=hosts,${LDAP_BASEDN} 1415dsSearchFilter: (&(objectClass=ipHost)(cn=\$1)) 1416dsSearchScope: one 1417 1418EOF 1419) > ${TMPDIR}/${_H_CN}.ldif 1420 1421 add_entry_by_DN "${_H_DN}" "${TMPDIR}/${_H_CN}.ldif" 1422 1423 _U_CN="user_auth_${LDAP_KRB_REALM}" 1424 _U_DN="cn=${_U_CN}, ${_C_DN}" 1425 ( cat << EOF 1426dn: ${_U_DN} 1427objectClass: top 1428objectClass: nsContainer 1429objectClass: dsIdentityMapping 1430objectClass: dsPatternMatching 1431cn: ${_U_CN} 1432dsMatching-pattern: \${Principal} 1433dsMatching-regexp: (.*)@${LDAP_KRB_REALM} 1434dsMappedDN: uid=\$1,ou=People,${LDAP_BASEDN} 1435 1436EOF 1437) > ${TMPDIR}/${_U_CN}.ldif 1438 1439 add_entry_by_DN "${_U_DN}" "${TMPDIR}/${_U_CN}.ldif" 1440 1441} 1442 1443 1444# 1445# Modify ACL to allow root to read all the password and only self can read 1446# its own password when sasl/GSSAPI bind is used 1447# 1448modify_userpassword_acl_for_gssapi() { 1449 1450 _P_DN="ou=People,${LDAP_BASEDN}" 1451 _H_DN="ou=Hosts,${LDAP_BASEDN}" 1452 _P_ACI="self-read-pwd" 1453 1454 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" > /dev/null 2>&1" 1455 if [ $? -ne 0 ]; then 1456 ${ECHO} " ${_P_DN} does not exist" 1457 # Not Found. Create a new entry 1458 ( cat << EOF 1459dn: ${_P_DN} 1460ou: People 1461objectClass: top 1462objectClass: organizationalUnit 1463EOF 1464) > ${TMPDIR}/gssapi_people.ldif 1465 1466 add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_people.ldif" 1467 else 1468 ${ECHO} " ${_P_DN} already exists" 1469 fi 1470 1471 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" aci > ${TMPDIR}/chk_gssapi_aci 2>&1" 1472 1473 if [ $? -eq 0 ]; then 1474 ${EVAL} "${GREP} ${_P_ACI} ${TMPDIR}/chk_gssapi_aci > /dev/null 2>&1" 1475 if [ $? -eq 0 ]; then 1476 ${ECHO} " userpassword ACL ${_P_ACI} already exists." 1477 return 1478 else 1479 ${ECHO} " userpassword ACL ${_P_ACI} not found. Create a new one." 1480 fi 1481 else 1482 ${ECHO} " Error searching aci for ${_P_DN}" 1483 cat ${TMPDIR}/chk_gssapi_aci 1484 cleanup 1485 exit 1 1486 fi 1487 ( cat << EOF 1488dn: ${_P_DN} 1489changetype: modify 1490add: aci 1491aci: (targetattr="userPassword")(version 3.0; acl self-read-pwd; allow (read,search) userdn="ldap:///self" and authmethod="sasl GSSAPI";) 1492- 1493add: aci 1494aci: (targetattr="userPassword")(version 3.0; acl host-read-pwd; allow (read,search) userdn="ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}" and authmethod="sasl GSSAPI";) 1495EOF 1496) > ${TMPDIR}/user_gssapi.ldif 1497 LDAP_TYPE_OR_VALUE_EXISTS=20 1498 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/user_gssapi.ldif ${VERB}" 1499 1500 case $? in 1501 0) 1502 ${ECHO} " ${_P_DN} uaserpassword ACL is updated." 1503 ;; 1504 20) 1505 ${ECHO} " ${_P_DN} uaserpassword ACL already exists." 1506 ;; 1507 *) 1508 ${ECHO} " ERROR: update of userpassword ACL for ${_P_DN} failed!" 1509 cleanup 1510 exit 1 1511 ;; 1512 esac 1513} 1514# 1515# $1: objectclass or attributetyp 1516# $2: name 1517search_update_schema() { 1518 1519 ATTR="${1}es" 1520 1521 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b cn=schema -s base \"objectclass=*\" ${ATTR} | ${GREP} -i \"${2}\" ${VERB}" 1522 if [ $? -ne 0 ]; then 1523 ${ECHO} "${1} ${2} does not exist." 1524 update_schema_attr 1525 update_schema_obj 1526 SCHEMA_UPDATED=1 1527 else 1528 ${ECHO} "${1} ${2} already exists. Schema has been updated" 1529 fi 1530} 1531 1532# 1533# $1: 1 - interactive, 0 - no 1534# 1535create_gssapi_profile() { 1536 1537 1538 if [ ${1} -eq 1 ]; then 1539 echo 1540 echo "You can create a sasl/GSSAPI enabled profile with default values now." 1541 get_confirm "Do you want to create a sasl/GSSAPI default profile ?" "n" 1542 1543 if [ $? -eq 0 ]; then 1544 return 1545 fi 1546 fi 1547 1548 # Add profile container if it does not exist 1549 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" > /dev/null 2>&1" 1550 if [ $? -ne 0 ]; then 1551 ( cat << EOF 1552dn: ou=profile,${LDAP_BASEDN} 1553ou: profile 1554objectClass: top 1555objectClass: organizationalUnit 1556EOF 1557) > ${TMPDIR}/profile_people.ldif 1558 1559 add_entry_by_DN "ou=profile,${LDAP_BASEDN}" "${TMPDIR}/profile_people.ldif" 1560 1561 fi 1562 1563 search_update_schema "objectclass" "DUAConfigProfile" 1564 1565 _P_NAME="gssapi_${LDAP_KRB_REALM}" 1566 if [ ${1} -eq 1 ]; then 1567 _P_TMP=${LDAP_PROFILE_NAME} 1568 LDAP_PROFILE_NAME=${_P_NAME} 1569 get_profile_name 1570 LDAP_GSSAPI_PROFILE=${LDAP_PROFILE_NAME} 1571 LDAP_PROFILE_NAME=${_P_TMP} 1572 fi 1573 1574 _P_DN="cn=${LDAP_GSSAPI_PROFILE},ou=profile,${LDAP_BASEDN}" 1575 if [ ${DEL_OLD_PROFILE} -eq 1 ]; then 1576 DEL_OLD_PROFILE=0 1577 ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} ${_P_DN} ${VERB}" 1578 fi 1579 1580 _SVR=`getent hosts ${IDS_SERVER} | ${NAWK} '{ print $1 }'` 1581 if [ ${IDS_PORT} -ne 389 ]; then 1582 _SVR="${_SVR}:${IDS_PORT}" 1583 fi 1584 1585 (cat << EOF 1586dn: ${_P_DN} 1587objectClass: top 1588objectClass: DUAConfigProfile 1589defaultServerList: ${_SVR} 1590defaultSearchBase: ${LDAP_BASEDN} 1591authenticationMethod: sasl/GSSAPI 1592followReferrals: ${LDAP_FOLLOWREF} 1593defaultSearchScope: ${LDAP_SEARCH_SCOPE} 1594searchTimeLimit: ${LDAP_SEARCH_TIME_LIMIT} 1595profileTTL: ${LDAP_PROFILE_TTL} 1596cn: ${LDAP_GSSAPI_PROFILE} 1597credentialLevel: self 1598bindTimeLimit: ${LDAP_BIND_LIMIT} 1599EOF 1600) > ${TMPDIR}/gssapi_profile.ldif 1601 1602 add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_profile.ldif" 1603 1604} 1605# 1606# Set up GSSAPI if necessary 1607# 1608gssapi_setup() { 1609 1610 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}" 1611 if [ $? -ne 0 ]; then 1612 ${ECHO} " sasl/GSSAPI is not supported by this LDAP server" 1613 return 1614 fi 1615 1616 get_confirm "GSSAPI is supported. Do you want to set up gssapi:(y/n)" "n" 1617 if [ $? -eq 0 ]; then 1618 ${ECHO} 1619 ${ECHO} "GSSAPI is not set up." 1620 ${ECHO} "sasl/GSSAPI bind may not workif it's not set up before." 1621 else 1622 get_krb_realm 1623 add_id_mapping_rules 1624 modify_userpassword_acl_for_gssapi 1625 create_gssapi_profile 1 1626 ${ECHO} 1627 ${ECHO} "GSSAPI setup is done." 1628 fi 1629 1630 cat << EOF 1631 1632You can continue to create a profile and 1633configure the LDAP server. 1634Or you can stop now. 1635 1636EOF 1637 get_confirm "Do you want to stop:(y/n)" "n" 1638 if [ $? -eq 1 ]; then 1639 cleanup 1640 exit 1641 fi 1642 1643} 1644gssapi_setup_auto() { 1645 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}" 1646 if [ $? -ne 0 ]; then 1647 ${ECHO} 1648 ${ECHO} "sasl/GSSAPI is not supported by this LDAP server" 1649 ${ECHO} 1650 return 1651 fi 1652 if [ -z "${LDAP_KRB_REALM}" ]; then 1653 ${ECHO} 1654 ${ECHO} "LDAP_KRB_REALM is not set. Skip gssapi setup." 1655 ${ECHO} "sasl/GSSAPI bind won't work properly." 1656 ${ECHO} 1657 return 1658 fi 1659 if [ -z "${LDAP_GSSAPI_PROFILE}" ]; then 1660 ${ECHO} 1661 ${ECHO} "LDAP_GSSAPI_PROFILE is not set. Default is gssapi_${LDAP_KRB_REALM}" 1662 ${ECHO} 1663 LDAP_GSSAPI_PROFILE="gssapi_${LDAP_KRB_REALM}" 1664 fi 1665 add_id_mapping_rules 1666 modify_userpassword_acl_for_gssapi 1667 create_gssapi_profile 0 1668} 1669# get_profile_name(): Enter the profile name. 1670# 1671get_profile_name() 1672{ 1673 # Reset Delete Old Profile since getting new profile name. 1674 DEL_OLD_PROFILE=0 1675 1676 # Loop until valid profile name, or replace. 1677 while : 1678 do 1679 # Prompt for profile name. 1680 get_ans "Enter the profile name (h=help):" "$LDAP_PROFILE_NAME" 1681 1682 # Check for Help. 1683 case "$ANS" in 1684 [Hh] | help | Help | \?) display_msg profile_help 1685 continue ;; 1686 * ) ;; 1687 esac 1688 1689 # Search to see if profile name already exists. 1690 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${ANS},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" 1691 if [ $? -eq 0 ]; then 1692 get_confirm_nodef "Are you sure you want to overwire profile cn=${ANS}?" 1693 if [ $? -eq 1 ]; then 1694 DEL_OLD_PROFILE=1 1695 return 0 # Replace old profile name. 1696 else 1697 ${ECHO} "Please re-enter a new profile name." 1698 fi 1699 else 1700 break # Unique profile name. 1701 fi 1702 done 1703 1704 # Set Profile Name. 1705 LDAP_PROFILE_NAME=$ANS 1706} 1707 1708 1709# 1710# get_srv_list(): Get the default server list. 1711# 1712get_srv_list() 1713{ 1714 # If LDAP_SERVER_LIST is NULL, then set, otherwise leave alone. 1715 if [ -z "${LDAP_SERVER_LIST}" ]; then 1716 LDAP_SERVER_LIST=`getent hosts ${IDS_SERVER} | awk '{print $1}'` 1717 if [ ${IDS_PORT} -ne 389 ]; then 1718 LDAP_SERVER_LIST="${LDAP_SERVER_LIST}:${IDS_PORT}" 1719 fi 1720 fi 1721 1722 # Prompt for new LDAP_SERVER_LIST. 1723 while : 1724 do 1725 get_ans "Default server list (h=help):" $LDAP_SERVER_LIST 1726 1727 # If help continue, otherwise break. 1728 case "$ANS" in 1729 [Hh] | help | Help | \?) display_msg def_srvlist_help ;; 1730 * ) break ;; 1731 esac 1732 done 1733 LDAP_SERVER_LIST=$ANS 1734} 1735 1736 1737# 1738# get_pref_srv(): The preferred server list (Overrides the server list) 1739# 1740get_pref_srv() 1741{ 1742 while : 1743 do 1744 get_ans "Preferred server list (h=help):" $LDAP_PREF_SRVLIST 1745 1746 # If help continue, otherwise break. 1747 case "$ANS" in 1748 [Hh] | help | Help | \?) display_msg pref_srvlist_help ;; 1749 * ) break ;; 1750 esac 1751 done 1752 LDAP_PREF_SRVLIST=$ANS 1753} 1754 1755 1756# 1757# get_search_scope(): Get the search scope from the user. 1758# 1759get_search_scope() 1760{ 1761 [ $DEBUG -eq 1 ] && ${ECHO} "In get_search_scope()" 1762 1763 _MENU_CHOICE=0 1764 while : 1765 do 1766 get_ans "Choose desired search scope (one, sub, h=help): " "one" 1767 _MENU_CHOICE=$ANS 1768 case "$_MENU_CHOICE" in 1769 one) LDAP_SEARCH_SCOPE="one" 1770 return 1 ;; 1771 sub) LDAP_SEARCH_SCOPE="sub" 1772 return 2 ;; 1773 h) display_msg srch_scope_help ;; 1774 *) ${ECHO} "Please enter \"one\", \"sub\", or \"h\"." ;; 1775 esac 1776 done 1777 1778} 1779 1780 1781# 1782# get_cred_level(): Function to display menu to user and get the 1783# credential level. 1784# 1785get_cred_level() 1786{ 1787 [ $DEBUG -eq 1 ] && ${ECHO} "In get_cred_level()" 1788 1789 _MENU_CHOICE=0 1790 display_msg cred_level_menu 1791 while : 1792 do 1793 get_ans "Choose Credential level [h=help]:" "1" 1794 _MENU_CHOICE=$ANS 1795 case "$_MENU_CHOICE" in 1796 1) LDAP_CRED_LEVEL="anonymous" 1797 return 1 ;; 1798 2) LDAP_CRED_LEVEL="proxy" 1799 return 2 ;; 1800 3) LDAP_CRED_LEVEL="proxy anonymous" 1801 return 3 ;; 1802 4) LDAP_CRED_LEVEL="self" 1803 SELF_GSSAPI=1 1804 return 4 ;; 1805 5) LDAP_CRED_LEVEL="self proxy" 1806 SELF_GSSAPI=1 1807 return 5 ;; 1808 6) LDAP_CRED_LEVEL="self proxy anonymous" 1809 SELF_GSSAPI=1 1810 return 6 ;; 1811 h) display_msg cred_lvl_help ;; 1812 *) ${ECHO} "Please enter 1, 2, 3, 4, 5 or 6." ;; 1813 esac 1814 done 1815} 1816 1817 1818# 1819# srvauth_menu_handler(): Enter the Service Authentication method. 1820# 1821srvauth_menu_handler() 1822{ 1823 # Display Auth menu 1824 display_msg srvauth_method_menu 1825 1826 # Get a Valid choice. 1827 while : 1828 do 1829 # Display appropriate prompt and get answer. 1830 if [ $_FIRST -eq 1 ]; then 1831 get_ans "Choose Service Authentication Method:" "1" 1832 else 1833 get_ans "Choose Service Authentication Method (0=reset):" 1834 fi 1835 1836 # Determine choice. 1837 _MENU_CHOICE=$ANS 1838 case "$_MENU_CHOICE" in 1839 1) _AUTHMETHOD="simple" 1840 break ;; 1841 2) _AUTHMETHOD="sasl/DIGEST-MD5" 1842 break ;; 1843 3) _AUTHMETHOD="tls:simple" 1844 break ;; 1845 4) _AUTHMETHOD="tls:sasl/DIGEST-MD5" 1846 break ;; 1847 5) _AUTHMETHOD="sasl/GSSAPI" 1848 break ;; 1849 0) _AUTHMETHOD="" 1850 _FIRST=1 1851 break ;; 1852 *) ${ECHO} "Please enter 1-5 or 0 to reset." ;; 1853 esac 1854 done 1855} 1856 1857 1858# 1859# auth_menu_handler(): Enter the Authentication method. 1860# 1861auth_menu_handler() 1862{ 1863 # Display Auth menu 1864 display_msg auth_method_menu 1865 1866 # Get a Valid choice. 1867 while : 1868 do 1869 # Display appropriate prompt and get answer. 1870 if [ $_FIRST -eq 1 ]; then 1871 get_ans "Choose Authentication Method (h=help):" "1" 1872 else 1873 get_ans "Choose Authentication Method (0=reset, h=help):" 1874 fi 1875 1876 # Determine choice. 1877 _MENU_CHOICE=$ANS 1878 case "$_MENU_CHOICE" in 1879 1) _AUTHMETHOD="none" 1880 break ;; 1881 2) _AUTHMETHOD="simple" 1882 break ;; 1883 3) _AUTHMETHOD="sasl/DIGEST-MD5" 1884 break ;; 1885 4) _AUTHMETHOD="tls:simple" 1886 break ;; 1887 5) _AUTHMETHOD="tls:sasl/DIGEST-MD5" 1888 break ;; 1889 6) _AUTHMETHOD="sasl/GSSAPI" 1890 break ;; 1891 0) _AUTHMETHOD="" 1892 _FIRST=1 1893 break ;; 1894 h) display_msg auth_help ;; 1895 *) ${ECHO} "Please enter 1-6, 0=reset, or h=help." ;; 1896 esac 1897 done 1898} 1899 1900 1901# 1902# get_auth(): Enter the Authentication method. 1903# 1904get_auth() 1905{ 1906 [ $DEBUG -eq 1 ] && ${ECHO} "In get_auth()" 1907 1908 _FIRST=1 # Flag for first time. 1909 _MENU_CHOICE=0 1910 _AUTHMETHOD="" # Tmp method. 1911 1912 while : 1913 do 1914 # Call Menu handler 1915 auth_menu_handler 1916 1917 # Add Auth Method to list. 1918 if [ $_FIRST -eq 1 ]; then 1919 LDAP_AUTHMETHOD="${_AUTHMETHOD}" 1920 _FIRST=0 1921 else 1922 LDAP_AUTHMETHOD="${LDAP_AUTHMETHOD};${_AUTHMETHOD}" 1923 fi 1924 1925 # Display current Authentication Method. 1926 ${ECHO} "" 1927 ${ECHO} "Current authenticationMethod: ${LDAP_AUTHMETHOD}" 1928 ${ECHO} "" 1929 1930 # Prompt for another Auth Method, or break out. 1931 get_confirm_nodef "Do you want to add another Authentication Method?" 1932 if [ $? -eq 0 ]; then 1933 break; 1934 fi 1935 done 1936} 1937 1938 1939# 1940# get_followref(): Whether or not to follow referrals. 1941# 1942get_followref() 1943{ 1944 get_confirm "Do you want the clients to follow referrals (y/n/h)?" "n" "referrals_help" 1945 if [ $? -eq 1 ]; then 1946 LDAP_FOLLOWREF="TRUE" 1947 else 1948 LDAP_FOLLOWREF="FALSE" 1949 fi 1950} 1951 1952 1953# 1954# get_timelimit(): Set the time limit. -1 is max time. 1955# 1956get_timelimit() 1957{ 1958 # Get current timeout value from cn=config. 1959 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-timelimit > ${TMPDIR}/chk_timeout 2>&1" 1960 if [ $? -ne 0 ]; then 1961 ${ECHO} " ERROR: Could not reach LDAP server to check current timeout!" 1962 cleanup 1963 exit 1 1964 fi 1965 CURR_TIMELIMIT=`${GREP} timelimit ${TMPDIR}/chk_timeout | cut -f2 -d=` 1966 1967 get_negone_num "Enter the time limit for iDS (current=${CURR_TIMELIMIT}):" "-1" 1968 IDS_TIMELIMIT=$NUM 1969} 1970 1971 1972# 1973# get_sizelimit(): Set the size limit. -1 is max size. 1974# 1975get_sizelimit() 1976{ 1977 # Get current sizelimit value from cn=config. 1978 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-sizelimit > ${TMPDIR}/chk_sizelimit 2>&1" 1979 if [ $? -ne 0 ]; then 1980 ${ECHO} " ERROR: Could not reach LDAP server to check current sizelimit!" 1981 cleanup 1982 exit 1 1983 fi 1984 CURR_SIZELIMIT=`${GREP} sizelimit ${TMPDIR}/chk_sizelimit | cut -f2 -d=` 1985 1986 get_negone_num "Enter the size limit for iDS (current=${CURR_SIZELIMIT}):" "-1" 1987 IDS_SIZELIMIT=$NUM 1988} 1989 1990 1991# 1992# get_want_crypt(): Ask user if want to store passwords in crypt? 1993# 1994get_want_crypt() 1995{ 1996 get_confirm "Do you want to store passwords in \"crypt\" format (y/n/h)?" "n" "crypt_help" 1997 if [ $? -eq 1 ]; then 1998 NEED_CRYPT="TRUE" 1999 else 2000 NEED_CRYPT="FALSE" 2001 fi 2002} 2003 2004 2005# 2006# get_srv_authMethod_pam(): Get the Service Auth Method for pam_ldap from user. 2007# 2008# NOTE: This function is base on get_auth(). 2009# 2010get_srv_authMethod_pam() 2011{ 2012 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_pam()" 2013 2014 _FIRST=1 # Flag for first time. 2015 _MENU_CHOICE=0 2016 _AUTHMETHOD="" # Tmp method. 2017 2018 while : 2019 do 2020 # Call Menu handler 2021 srvauth_menu_handler 2022 2023 # Add Auth Method to list. 2024 if [ $_FIRST -eq 1 ]; then 2025 if [ "$_AUTHMETHOD" = "" ]; then 2026 LDAP_SRV_AUTHMETHOD_PAM="" 2027 else 2028 LDAP_SRV_AUTHMETHOD_PAM="pam_ldap:${_AUTHMETHOD}" 2029 fi 2030 _FIRST=0 2031 else 2032 LDAP_SRV_AUTHMETHOD_PAM="${LDAP_SRV_AUTHMETHOD_PAM};${_AUTHMETHOD}" 2033 fi 2034 2035 # Display current Authentication Method. 2036 ${ECHO} "" 2037 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_PAM}" 2038 ${ECHO} "" 2039 2040 # Prompt for another Auth Method, or break out. 2041 get_confirm_nodef "Do you want to add another Authentication Method?" 2042 if [ $? -eq 0 ]; then 2043 break; 2044 fi 2045 done 2046 2047 # Check in case user reset string and exited loop. 2048 if [ "$LDAP_SRV_AUTHMETHOD_PAM" = "" ]; then 2049 NEED_SRVAUTH_PAM=0 2050 fi 2051} 2052 2053 2054# 2055# get_srv_authMethod_key(): Get the Service Auth Method for keyserv from user. 2056# 2057# NOTE: This function is base on get_auth(). 2058# 2059get_srv_authMethod_key() 2060{ 2061 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_key()" 2062 2063 _FIRST=1 # Flag for first time. 2064 _MENU_CHOICE=0 2065 _AUTHMETHOD="" # Tmp method. 2066 2067 while : 2068 do 2069 # Call Menu handler 2070 srvauth_menu_handler 2071 2072 # Add Auth Method to list. 2073 if [ $_FIRST -eq 1 ]; then 2074 if [ "$_AUTHMETHOD" = "" ]; then 2075 LDAP_SRV_AUTHMETHOD_KEY="" 2076 else 2077 LDAP_SRV_AUTHMETHOD_KEY="keyserv:${_AUTHMETHOD}" 2078 fi 2079 _FIRST=0 2080 else 2081 LDAP_SRV_AUTHMETHOD_KEY="${LDAP_SRV_AUTHMETHOD_KEY};${_AUTHMETHOD}" 2082 fi 2083 2084 # Display current Authentication Method. 2085 ${ECHO} "" 2086 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_KEY}" 2087 ${ECHO} "" 2088 2089 # Prompt for another Auth Method, or break out. 2090 get_confirm_nodef "Do you want to add another Authentication Method?" 2091 if [ $? -eq 0 ]; then 2092 break; 2093 fi 2094 done 2095 2096 # Check in case user reset string and exited loop. 2097 if [ "$LDAP_SRV_AUTHMETHOD_KEY" = "" ]; then 2098 NEED_SRVAUTH_KEY=0 2099 fi 2100} 2101 2102 2103# 2104# get_srv_authMethod_cmd(): Get the Service Auth Method for passwd-cmd from user. 2105# 2106# NOTE: This function is base on get_auth(). 2107# 2108get_srv_authMethod_cmd() 2109{ 2110 [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_cmd()" 2111 2112 _FIRST=1 # Flag for first time. 2113 _MENU_CHOICE=0 2114 _AUTHMETHOD="" # Tmp method. 2115 2116 while : 2117 do 2118 # Call Menu handler 2119 srvauth_menu_handler 2120 2121 # Add Auth Method to list. 2122 if [ $_FIRST -eq 1 ]; then 2123 if [ "$_AUTHMETHOD" = "" ]; then 2124 LDAP_SRV_AUTHMETHOD_CMD="" 2125 else 2126 LDAP_SRV_AUTHMETHOD_CMD="passwd-cmd:${_AUTHMETHOD}" 2127 fi 2128 _FIRST=0 2129 else 2130 LDAP_SRV_AUTHMETHOD_CMD="${LDAP_SRV_AUTHMETHOD_CMD};${_AUTHMETHOD}" 2131 fi 2132 2133 # Display current Authentication Method. 2134 ${ECHO} "" 2135 ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_CMD}" 2136 ${ECHO} "" 2137 2138 # Prompt for another Auth Method, or break out. 2139 get_confirm_nodef "Do you want to add another Authentication Method?" 2140 if [ $? -eq 0 ]; then 2141 break; 2142 fi 2143 done 2144 2145 # Check in case user reset string and exited loop. 2146 if [ "$LDAP_SRV_AUTHMETHOD_CMD" = "" ]; then 2147 NEED_SRVAUTH_CMD=0 2148 fi 2149} 2150 2151 2152# 2153# get_srch_time(): Amount of time to search. 2154# 2155get_srch_time() 2156{ 2157 get_negone_num "Client search time limit in seconds (h=help):" "$LDAP_SEARCH_TIME_LIMIT" "srchtime_help" 2158 LDAP_SEARCH_TIME_LIMIT=$NUM 2159} 2160 2161 2162# 2163# get_prof_ttl(): The profile time to live (TTL) 2164# 2165get_prof_ttl() 2166{ 2167 get_negone_num "Profile Time To Live in seconds (h=help):" "$LDAP_PROFILE_TTL" "profttl_help" 2168 LDAP_PROFILE_TTL=$NUM 2169} 2170 2171 2172# 2173# get_bind_limit(): Bind time limit 2174# 2175get_bind_limit() 2176{ 2177 get_negone_num "Bind time limit in seconds (h=help):" "$LDAP_BIND_LIMIT" "bindlim_help" 2178 LDAP_BIND_LIMIT=$NUM 2179} 2180 2181 2182###################################################################### 2183# FUNCTIONS FOR Service Search Descriptor's START HERE. 2184###################################################################### 2185 2186 2187# 2188# add_ssd(): Get SSD's from user and add to file. 2189# 2190add_ssd() 2191{ 2192 [ $DEBUG -eq 1 ] && ${ECHO} "In add_ssd()" 2193 2194 # Enter the service id. Loop til unique. 2195 while : 2196 do 2197 get_ans "Enter the service id:" 2198 _SERV_ID=$ANS 2199 2200 # Grep for name existing. 2201 ${GREP} -i "^$ANS:" ${SSD_FILE} > /dev/null 2>&1 2202 if [ $? -eq 1 ]; then 2203 break 2204 fi 2205 2206 # Name exists, print message, let user decide. 2207 ${ECHO} "ERROR: Service id ${ANS} already exists." 2208 done 2209 2210 get_ans "Enter the base:" 2211 _BASE=$ANS 2212 2213 # Get the scope and verify that its one or sub. 2214 while : 2215 do 2216 get_ans "Enter the scope:" 2217 _SCOPE=$ANS 2218 case `${ECHO} ${_SCOPE} | tr '[A-Z]' '[a-z]'` in 2219 one) break ;; 2220 sub) break ;; 2221 *) ${ECHO} "${_SCOPE} is Not valid - Enter 'one' or 'sub'" ;; 2222 esac 2223 done 2224 2225 # Build SSD to add to file. 2226 _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}" 2227 2228 # Add the SSD to the file. 2229 ${ECHO} "${_SSD}" >> ${SSD_FILE} 2230} 2231 2232 2233# 2234# delete_ssd(): Delete a SSD from the list. 2235# 2236delete_ssd() 2237{ 2238 [ $DEBUG -eq 1 ] && ${ECHO} "In delete_ssd()" 2239 2240 # Get service id name from user for SSD to delete. 2241 get_ans_req "Enter service id to delete:" 2242 2243 # Make sure service id exists. 2244 ${GREP} "$ANS" ${SSD_FILE} > /dev/null 2>&1 2245 if [ $? -eq 1 ]; then 2246 ${ECHO} "Invalid service id: $ANS not present in list." 2247 return 2248 fi 2249 2250 # Create temporary back SSD file. 2251 cp ${SSD_FILE} ${SSD_FILE}.bak 2252 if [ $? -eq 1 ]; then 2253 ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak" 2254 exit 1 2255 fi 2256 2257 # Use ${GREP} to remove the SSD. Read from temp file 2258 # and write to the orig file. 2259 ${GREP} -v "$ANS" ${SSD_FILE}.bak > ${SSD_FILE} 2260} 2261 2262 2263# 2264# modify_ssd(): Allow user to modify a SSD. 2265# 2266modify_ssd() 2267{ 2268 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_ssd()" 2269 2270 # Prompt user for service id. 2271 get_ans_req "Enter service id to modify:" 2272 2273 # Put into temp _LINE. 2274 _LINE=`${GREP} "^$ANS:" ${SSD_FILE}` 2275 if [ "$_LINE" = "" ]; then 2276 ${ECHO} "Invalid service id: $ANS" 2277 return 2278 fi 2279 2280 # Display current filter for user to see. 2281 ${ECHO} "" 2282 ${ECHO} "Current SSD: $_LINE" 2283 ${ECHO} "" 2284 2285 # Get the defaults. 2286 _CURR_BASE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 1` 2287 _CURR_SCOPE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 2` 2288 2289 # Create temporary back SSD file. 2290 cp ${SSD_FILE} ${SSD_FILE}.bak 2291 if [ $? -eq 1 ]; then 2292 ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak" 2293 cleanup 2294 exit 1 2295 fi 2296 2297 # Removed the old line. 2298 ${GREP} -v "^$ANS:" ${SSD_FILE}.bak > ${SSD_FILE} 2>&1 2299 2300 # New Entry 2301 _SERV_ID=$ANS 2302 get_ans_req "Enter the base:" "$_CURR_BASE" 2303 _BASE=$ANS 2304 get_ans_req "Enter the scope:" "$_CURR_SCOPE" 2305 _SCOPE=$ANS 2306 2307 # Build the new SSD. 2308 _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}" 2309 2310 # Add the SSD to the file. 2311 ${ECHO} "${_SSD}" >> ${SSD_FILE} 2312} 2313 2314 2315# 2316# display_ssd(): Display the current SSD list. 2317# 2318display_ssd() 2319{ 2320 [ $DEBUG -eq 1 ] && ${ECHO} "In display_ssd()" 2321 2322 ${ECHO} "" 2323 ${ECHO} "Current Service Search Descriptors:" 2324 ${ECHO} "==================================" 2325 cat ${SSD_FILE} 2326 ${ECHO} "" 2327 ${ECHO} "Hit return to continue." 2328 read __A 2329} 2330 2331 2332# 2333# prompt_ssd(): Get SSD's from user. 2334# 2335prompt_ssd() 2336{ 2337 [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_ssd()" 2338 # See if user wants SSD's? 2339 get_confirm "Do you wish to setup Service Search Descriptors (y/n/h)?" "n" "ssd_help" 2340 [ "$?" -eq 0 ] && return 2341 2342 # Display menu for SSD choices. 2343 while : 2344 do 2345 display_msg prompt_ssd_menu 2346 get_ans "Enter menu choice:" "Quit" 2347 case "$ANS" in 2348 [Aa] | add) add_ssd ;; 2349 [Dd] | delete) delete_ssd ;; 2350 [Mm] | modify) modify_ssd ;; 2351 [Pp] | print | display) display_ssd ;; 2352 [Xx] | reset | clear) reset_ssd_file ;; 2353 [Hh] | Help | help) display_msg ssd_menu_help 2354 ${ECHO} " Press return to continue." 2355 read __A ;; 2356 [Qq] | Quit | quit) return ;; 2357 *) ${ECHO} "Invalid choice: $ANS please re-enter from menu." ;; 2358 esac 2359 done 2360} 2361 2362 2363# 2364# reset_ssd_file(): Blank out current SSD file. 2365# 2366reset_ssd_file() 2367{ 2368 [ $DEBUG -eq 1 ] && ${ECHO} "In reset_ssd_file()" 2369 2370 rm -f ${SSD_FILE} 2371 touch ${SSD_FILE} 2372} 2373 2374 2375# 2376# create_ssd_file(): Create a temporary file for SSD's. 2377# 2378create_ssd_file() 2379{ 2380 [ $DEBUG -eq 1 ] && ${ECHO} "In create_ssd_file()" 2381 2382 # Build a list of SSD's and store in temp file. 2383 ${GREP} "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} | \ 2384 sed 's/LDAP_SERV_SRCH_DES=//' \ 2385 > ${SSD_FILE} 2386} 2387 2388 2389# 2390# ssd_2_config(): Append the SSD file to the output file. 2391# 2392ssd_2_config() 2393{ 2394 [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_config()" 2395 2396 # Convert to config file format using sed. 2397 sed -e "s/^/LDAP_SERV_SRCH_DES=/" ${SSD_FILE} >> ${OUTPUT_FILE} 2398} 2399 2400 2401# 2402# ssd_2_profile(): Add SSD's to the GEN_CMD string. 2403# 2404ssd_2_profile() 2405{ 2406 [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_profile()" 2407 2408 GEN_TMPFILE=${TMPDIR}/ssd_tmpfile 2409 touch ${GEN_TMPFILE} 2410 2411 # Add and convert each SSD to string. 2412 while read SSD_LINE 2413 do 2414 ${ECHO} " -a \"serviceSearchDescriptor=${SSD_LINE}\"\c" >> ${GEN_TMPFILE} 2415 done <${SSD_FILE} 2416 2417 # Add SSD's to GEN_CMD. 2418 GEN_CMD="${GEN_CMD} `cat ${GEN_TMPFILE}`" 2419} 2420 2421 2422# 2423# prompt_config_info(): This function prompts the user for the config 2424# info that is not specified in the input file. 2425# 2426prompt_config_info() 2427{ 2428 [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_config_info()" 2429 2430 # Prompt for iDS server name. 2431 get_ids_server 2432 2433 # Prompt for iDS port number. 2434 get_ids_port 2435 2436 # Check iDS version for compatibility. 2437 chk_ids_version 2438 2439 # Check if the server supports the VLV. 2440 chk_vlv_indexes 2441 2442 # Get the Directory manager DN and passwd. 2443 get_dirmgr_dn 2444 get_dirmgr_pw 2445 2446 # 2447 # LDAP CLIENT PROFILE SPECIFIC INFORMATION. 2448 # (i.e. The fields that show up in the profile.) 2449 # 2450 get_domain "domain_help" 2451 2452 get_basedn 2453 2454 gssapi_setup 2455 2456 get_profile_name 2457 get_srv_list 2458 get_pref_srv 2459 get_search_scope 2460 2461 # If cred is "anonymous", make auth == "none" 2462 get_cred_level 2463 if [ "$LDAP_CRED_LEVEL" != "anonymous" ]; then 2464 get_auth 2465 fi 2466 2467 get_followref 2468 2469 # Query user about timelimt. 2470 get_confirm "Do you want to modify the server timelimit value (y/n/h)?" "n" "tlim_help" 2471 NEED_TIME=$? 2472 [ $NEED_TIME -eq 1 ] && get_timelimit 2473 2474 # Query user about sizelimit. 2475 get_confirm "Do you want to modify the server sizelimit value (y/n/h)?" "n" "slim_help" 2476 NEED_SIZE=$? 2477 [ $NEED_SIZE -eq 1 ] && get_sizelimit 2478 2479 # Does the user want to store passwords in crypt format? 2480 get_want_crypt 2481 2482 # Prompt for any Service Authentication Methods? 2483 get_confirm "Do you want to setup a Service Authentication Methods (y/n/h)?" "n" "srvauth_help" 2484 if [ $? -eq 1 ]; then 2485 # Does the user want to set Service Authentication Method for pam_ldap? 2486 get_confirm "Do you want to setup a Service Auth. Method for \"pam_ldap\" (y/n/h)?" "n" "pam_ldap_help" 2487 NEED_SRVAUTH_PAM=$? 2488 [ $NEED_SRVAUTH_PAM -eq 1 ] && get_srv_authMethod_pam 2489 2490 # Does the user want to set Service Authentication Method for keyserv? 2491 get_confirm "Do you want to setup a Service Auth. Method for \"keyserv\" (y/n/h)?" "n" "keyserv_help" 2492 NEED_SRVAUTH_KEY=$? 2493 [ $NEED_SRVAUTH_KEY -eq 1 ] && get_srv_authMethod_key 2494 2495 # Does the user want to set Service Authentication Method for passwd-cmd? 2496 get_confirm "Do you want to setup a Service Auth. Method for \"passwd-cmd\" (y/n/h)?" "n" "passwd-cmd_help" 2497 NEED_SRVAUTH_CMD=$? 2498 [ $NEED_SRVAUTH_CMD -eq 1 ] && get_srv_authMethod_cmd 2499 fi 2500 2501 2502 # Get Timeouts 2503 get_srch_time 2504 get_prof_ttl 2505 get_bind_limit 2506 2507 # Reset the sdd_file and prompt user for SSD. Will use menus 2508 # to build an SSD File. 2509 reset_ssd_file 2510 prompt_ssd 2511 2512 # Display FULL debugging info. 2513 disp_full_debug 2514 2515 # Extra blank line to separate prompt lines from steps. 2516 ${ECHO} " " 2517} 2518 2519 2520###################################################################### 2521# FUNCTIONS FOR display_summary() START HERE. 2522###################################################################### 2523 2524 2525# 2526# get_proxyagent(): Get the proxyagent DN. 2527# 2528get_proxyagent() 2529{ 2530 LDAP_PROXYAGENT="cn=proxyagent,ou=profile,${LDAP_BASEDN}" # default 2531 get_ans "Enter DN for proxy agent:" "$LDAP_PROXYAGENT" 2532 LDAP_PROXYAGENT=$ANS 2533} 2534 2535 2536# 2537# get_proxy_pw(): Get the proxyagent passwd. 2538# 2539get_proxy_pw() 2540{ 2541 get_passwd "Enter passwd for proxyagent:" 2542 LDAP_PROXYAGENT_CRED=$ANS 2543} 2544 2545 2546# 2547# display_summary(): Display a summary of values entered and let the 2548# user modify values at will. 2549# 2550display_summary() 2551{ 2552 [ $DEBUG -eq 1 ] && ${ECHO} "In display_summary()" 2553 2554 # Create lookup table for function names. First entry is dummy for 2555 # shift. 2556 TBL1="dummy" 2557 TBL2="get_domain get_basedn get_profile_name" 2558 TBL3="get_srv_list get_pref_srv get_search_scope get_cred_level" 2559 TBL4="get_auth get_followref" 2560 TBL5="get_timelimit get_sizelimit get_want_crypt" 2561 TBL6="get_srv_authMethod_pam get_srv_authMethod_key get_srv_authMethod_cmd" 2562 TBL7="get_srch_time get_prof_ttl get_bind_limit" 2563 TBL8="prompt_ssd" 2564 FUNC_TBL="$TBL1 $TBL2 $TBL3 $TBL4 $TBL5 $TBL6 $TBL7 $TBL8" 2565 2566 # Since menu prompt string is long, set here. 2567 _MENU_PROMPT="Enter config value to change: (1-19 0=commit changes)" 2568 2569 # Infinite loop. Test for 0, and break in loop. 2570 while : 2571 do 2572 # Display menu and get value in range. 2573 display_msg summary_menu 2574 get_menu_choice "${_MENU_PROMPT}" "0" "19" "0" 2575 _CH=$MN_CH 2576 2577 # Make sure where not exiting. 2578 if [ $_CH -eq 0 ]; then 2579 break # Break out of loop if 0 selected. 2580 fi 2581 2582 # Call appropriate function from function table. 2583 set $FUNC_TBL 2584 shift $_CH 2585 $1 # Call the appropriate function. 2586 done 2587 2588 # If cred level is still see if user wants a change? 2589 if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "proxy" > /dev/null 2>&1 2590 then 2591 if [ "$LDAP_AUTHMETHOD" != "none" ]; then 2592 NEED_PROXY=1 # I assume integer test is faster? 2593 get_proxyagent 2594 get_proxy_pw 2595 else 2596 ${ECHO} "WARNING: Since Authentication method is 'none'." 2597 ${ECHO} " Credential level will be set to 'anonymous'." 2598 LDAP_CRED_LEVEL="anonymous" 2599 fi 2600 fi 2601 2602 # Display FULL debugging info. 2603 disp_full_debug 2604 2605 # Final confirmation message. (ARE YOU SURE!) 2606 ${ECHO} " " 2607 get_confirm_nodef "WARNING: About to start committing changes. (y=continue, n=EXIT)" 2608 if [ $? -eq 0 ]; then 2609 ${ECHO} "Terminating setup without making changes at users request." 2610 cleanup 2611 exit 1 2612 fi 2613 2614 # Print newline 2615 ${ECHO} " " 2616} 2617 2618 2619# 2620# create_config_file(): Write config data to config file specified. 2621# 2622create_config_file() 2623{ 2624 [ $DEBUG -eq 1 ] && ${ECHO} "In create_config_file()" 2625 2626 # If output file exists, delete it. 2627 [ -f $OUTPUT_FILE ] && rm $OUTPUT_FILE 2628 2629 # Create output file. 2630 cat > $OUTPUT_FILE <<EOF 2631#!/bin/sh 2632# $OUTPUT_FILE - This file contains configuration information for 2633# Native LDAP. Use the idsconfig tool to load it. 2634# 2635# WARNING: This file was generated by idsconfig, and is intended to 2636# be loaded by idsconfig as is. DO NOT EDIT THIS FILE! 2637# 2638IDS_SERVER="$IDS_SERVER" 2639IDS_PORT=$IDS_PORT 2640IDS_TIMELIMIT=$IDS_TIMELIMIT 2641IDS_SIZELIMIT=$IDS_SIZELIMIT 2642LDAP_ROOTDN="$LDAP_ROOTDN" 2643LDAP_ROOTPWD=$LDAP_ROOTPWD 2644LDAP_DOMAIN="$LDAP_DOMAIN" 2645LDAP_SUFFIX="$LDAP_SUFFIX" 2646LDAP_KRB_REALM="$LDAP_KRB_REALM" 2647LDAP_GSSAPI_PROFILE="$LDAP_GSSAPI_PROFILE" 2648 2649# Internal program variables that need to be set. 2650NEED_PROXY=$NEED_PROXY 2651NEED_TIME=$NEED_TIME 2652NEED_SIZE=$NEED_SIZE 2653NEED_CRYPT=$NEED_CRYPT 2654 2655# LDAP PROFILE related defaults 2656LDAP_PROFILE_NAME="$LDAP_PROFILE_NAME" 2657DEL_OLD_PROFILE=1 2658LDAP_BASEDN="$LDAP_BASEDN" 2659LDAP_SERVER_LIST="$LDAP_SERVER_LIST" 2660LDAP_AUTHMETHOD="$LDAP_AUTHMETHOD" 2661LDAP_FOLLOWREF=$LDAP_FOLLOWREF 2662LDAP_SEARCH_SCOPE="$LDAP_SEARCH_SCOPE" 2663NEED_SRVAUTH_PAM=$NEED_SRVAUTH_PAM 2664NEED_SRVAUTH_KEY=$NEED_SRVAUTH_KEY 2665NEED_SRVAUTH_CMD=$NEED_SRVAUTH_CMD 2666LDAP_SRV_AUTHMETHOD_PAM="$LDAP_SRV_AUTHMETHOD_PAM" 2667LDAP_SRV_AUTHMETHOD_KEY="$LDAP_SRV_AUTHMETHOD_KEY" 2668LDAP_SRV_AUTHMETHOD_CMD="$LDAP_SRV_AUTHMETHOD_CMD" 2669LDAP_SEARCH_TIME_LIMIT=$LDAP_SEARCH_TIME_LIMIT 2670LDAP_PREF_SRVLIST="$LDAP_PREF_SRVLIST" 2671LDAP_PROFILE_TTL=$LDAP_PROFILE_TTL 2672LDAP_CRED_LEVEL="$LDAP_CRED_LEVEL" 2673LDAP_BIND_LIMIT=$LDAP_BIND_LIMIT 2674 2675# Proxy Agent 2676LDAP_PROXYAGENT="$LDAP_PROXYAGENT" 2677LDAP_PROXYAGENT_CRED=$LDAP_PROXYAGENT_CRED 2678 2679# Export all the variables (just in case) 2680export IDS_HOME IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST LDAP_BASEDN 2681export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED 2682export NEED_PROXY 2683export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST 2684export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT 2685export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT 2686export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD 2687export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD 2688export LDAP_SERV_SRCH_DES SSD_FILE LDAP_KRB_REALM LDAP_GSSAPI_PROFILE 2689 2690# Service Search Descriptors start here if present: 2691EOF 2692 # Add service search descriptors. 2693 ssd_2_config "${OUTPUT_FILE}" 2694 2695 # Add LDAP suffix preferences 2696 print_suffix_config >> "${OUTPUT_FILE}" 2697 2698 # Add the end of FILE tag. 2699 ${ECHO} "" >> ${OUTPUT_FILE} 2700 ${ECHO} "# End of $OUTPUT_FILE" >> ${OUTPUT_FILE} 2701} 2702 2703 2704# 2705# chk_vlv_indexes(): Do ldapsearch to see if server supports VLV. 2706# 2707chk_vlv_indexes() 2708{ 2709 # Do ldapsearch to see if server supports VLV. 2710 ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkVLV 2>&1 2711 eval "${GREP} 2.16.840.1.113730.3.4.9 ${TMPDIR}/checkVLV ${VERB}" 2712 if [ $? -ne 0 ]; then 2713 ${ECHO} "ERROR: VLV is not supported on LDAP server!" 2714 cleanup 2715 exit 1 2716 fi 2717 [ $DEBUG -eq 1 ] && ${ECHO} " VLV controls found on LDAP server." 2718} 2719 2720# 2721# get_backend(): this function gets the relevant backend 2722# (database) for LDAP_BASED. 2723# Description: set IDS_DATABASE; exit on failure. 2724# Prerequisite: LDAP_BASEDN and LDAP_SUFFIX are 2725# valid. 2726# 2727# backend is retrieved from suffixes and subsuffixes 2728# defined under "cn=mapping tree,cn=config". The 2729# nsslapd-state attribute of these suffixes entries 2730# is filled with either Backend, Disabled or referrals 2731# related values. We only want those that have a true 2732# backend database to select the relevant backend. 2733# 2734get_backend() 2735{ 2736 [ $DEBUG -eq 1 ] && ${ECHO} "In get_backend()" 2737 2738 cur_suffix=${LDAP_BASEDN} 2739 prev_suffix= 2740 IDS_DATABASE= 2741 while [ "${cur_suffix}" != "${prev_suffix}" ] 2742 do 2743 [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP suffix: ${cur_suffix}" 2744 eval "${LDAPSEARCH} ${LDAP_ARGS} " \ 2745 "-b \"cn=\\\"${cur_suffix}\\\",cn=mapping tree,cn=config\" " \ 2746 "-s base nsslapd-state=Backend nsslapd-backend 2>&1 " \ 2747 "| ${GREP} 'nsslapd-backend=' " \ 2748 "> ${TMPDIR}/ids_database_name 2>&1" 2749 NUM_DBS=`wc -l ${TMPDIR}/ids_database_name | awk '{print $1}'` 2750 case ${NUM_DBS} in 2751 0) # not a suffix, or suffix not activated; try next 2752 prev_suffix=${cur_suffix} 2753 cur_suffix=`${ECHO} ${cur_suffix} | cut -f2- -d','` 2754 ;; 2755 1) # suffix found; get database name 2756 IDS_DATABASE=`cat ${TMPDIR}/ids_database_name | cut -d= -f2` 2757 ;; 2758 *) # can not handle more than one database per suffix 2759 ${ECHO} "ERROR: More than one database is configured " 2760 ${ECHO} " for $LDAP_SUFFIX!" 2761 ${ECHO} " $PROG can not configure suffixes where " 2762 ${ECHO} " more than one database is used for one suffix." 2763 cleanup 2764 exit 1 2765 ;; 2766 esac 2767 if [ -n "${IDS_DATABASE}" ]; then 2768 break 2769 fi 2770 done 2771 2772 if [ -z "${IDS_DATABASE}" ]; then 2773 # should not happen, since LDAP_BASEDN is supposed to be valid 2774 ${ECHO} "Could not find a valid backend for ${LDAP_BASEDN}." 2775 ${ECHO} "Exiting." 2776 cleanup 2777 exit 1 2778 fi 2779 2780 [ $DEBUG -eq 1 ] && ${ECHO} "IDS_DATABASE: ${IDS_DATABASE}" 2781} 2782 2783# 2784# validate_suffix(): This function validates ${LDAP_SUFFIX} 2785# THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION. 2786# 2787validate_suffix() 2788{ 2789 [ $DEBUG -eq 1 ] && ${ECHO} "In validate_suffix()" 2790 2791 # Check LDAP_SUFFIX is not null 2792 if [ -z "${LDAP_SUFFIX}" ]; then 2793 ${ECHO} "Invalid suffix (null suffix)" 2794 cleanup 2795 exit 1 2796 fi 2797 2798 # Check LDAP_SUFFIX and LDAP_BASEDN are consistent 2799 # Convert to lower case for basename. 2800 format_string "${LDAP_BASEDN}" 2801 LOWER_BASEDN="${FMT_STR}" 2802 format_string "${LDAP_SUFFIX}" 2803 LOWER_SUFFIX="${FMT_STR}" 2804 2805 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}" 2806 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}" 2807 2808 if [ "${LOWER_BASEDN}" != "${LOWER_SUFFIX}" ]; then 2809 sub_basedn=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"` 2810 if [ "$sub_basedn" = "${LOWER_BASEDN}" ]; then 2811 ${ECHO} "Invalid suffix ${LOWER_SUFFIX}" 2812 ${ECHO} "for Base DN ${LOWER_BASEDN}" 2813 cleanup 2814 exit 1 2815 fi 2816 fi 2817 2818 # Check LDAP_SUFFIX does exist 2819 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_SUFFIX}\" -s base \"objectclass=*\" > ${TMPDIR}/checkSuffix 2>&1" && return 0 2820 2821 # Well, suffix does not exist, try to prepare create it ... 2822 NEED_CREATE_SUFFIX=1 2823 prep_create_sfx_entry || 2824 { 2825 cleanup 2826 exit 1 2827 } 2828 [ -n "${NEED_CREATE_BACKEND}" ] && 2829 { 2830 # try to use id attr value of the suffix as a database name 2831 IDS_DATABASE=${_VAL} 2832 prep_create_sfx_backend 2833 case $? in 2834 1) # cann't use the name we want, so we can either exit or use 2835 # some another available name - doing the last ... 2836 IDS_DATABASE=${IDS_DATABASE_AVAIL} 2837 ;; 2838 2) # unable to determine database name 2839 cleanup 2840 exit 1 2841 ;; 2842 esac 2843 } 2844 2845 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix $LDAP_SUFFIX, Database $IDS_DATABASE" 2846} 2847 2848# 2849# validate_info(): This function validates the basic info collected 2850# So that some problems are caught right away. 2851# THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION. 2852# 2853validate_info() 2854{ 2855 [ $DEBUG -eq 1 ] && ${ECHO} "In validate_info()" 2856 2857 # Set SERVER_ARGS, AUTH_ARGS, and LDAP_ARGS for the config file. 2858 SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" 2859 AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" 2860 LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" 2861 export SERVER_ARGS 2862 2863 # Check the Root DN and Root DN passwd. 2864 # Use eval instead of $EVAL because not part of setup. (validate) 2865 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1" 2866 if [ $? -ne 0 ]; then 2867 eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}" 2868 if [ $? -eq 0 ]; then 2869 ${ECHO} "ERROR: Root DN passwd is invalid." 2870 else 2871 ${ECHO} "ERROR2: Invalid Root DN <${LDAP_ROOTDN}>." 2872 fi 2873 cleanup 2874 exit 1 2875 fi 2876 [ $DEBUG -eq 1 ] && ${ECHO} " RootDN ... OK" 2877 [ $DEBUG -eq 1 ] && ${ECHO} " RootDN passwd ... OK" 2878 2879 # Check if the server supports the VLV. 2880 chk_vlv_indexes 2881 [ $DEBUG -eq 1 ] && ${ECHO} " VLV indexes ... OK" 2882 2883 # Check LDAP suffix 2884 validate_suffix 2885 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP suffix ... OK" 2886} 2887 2888# 2889# format_string(): take a string as argument and set FMT_STR 2890# to be the same string formatted as follow: 2891# - only lower case characters 2892# - no unnecessary spaces around , and = 2893# 2894format_string() 2895{ 2896 FMT_STR=`${ECHO} "$1" | tr '[A-Z]' '[a-z]' | 2897 sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'` 2898} 2899 2900# 2901# prepare for the suffix entry creation 2902# 2903# input : LDAP_BASEDN, LDAP_SUFFIX - base dn and suffix; 2904# in/out : LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - initially may come from config. 2905# output : NEED_CREATE_BACKEND - backend for this suffix needs to be created; 2906# _RDN, _ATT, _VAL - suffix's RDN, id attribute name and its value. 2907# return : 0 - success, otherwise error. 2908# 2909prep_create_sfx_entry() 2910{ 2911 [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_entry()" 2912 2913 # check whether suffix corresponds to base dn 2914 format_string "${LDAP_BASEDN}" 2915 ${ECHO} ",${FMT_STR}" | ${GREP} ",${LDAP_SUFFIX}$" >/dev/null 2>&1 || 2916 { 2917 display_msg sfx_not_suitable 2918 return 1 2919 } 2920 2921 # parse LDAP_SUFFIX 2922 _RDN=`${ECHO} "${LDAP_SUFFIX}" | cut -d, -f1` 2923 _ATT=`${ECHO} "${_RDN}" | cut -d= -f1` 2924 _VAL=`${ECHO} "${_RDN}" | cut -d= -f2-` 2925 2926 # find out an objectclass for suffix entry if it is not defined yet 2927 [ -z "${LDAP_SUFFIX_OBJ}" ] && 2928 { 2929 get_objectclass ${_ATT} 2930 [ -z "${_ATTR_NAME}" ] && 2931 { 2932 display_msg obj_not_found 2933 return 1 2934 } 2935 LDAP_SUFFIX_OBJ=${_ATTR_NAME} 2936 } 2937 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix entry object is ${LDAP_SUFFIX_OBJ}" 2938 2939 # find out an aci for suffix entry if it is not defined yet 2940 [ -z "${LDAP_SUFFIX_ACI}" ] && 2941 { 2942 # set Directory Server default aci 2943 LDAP_SUFFIX_ACI=`cat <<EOF 2944aci: (targetattr != "userPassword || passwordHistory || passwordExpirationTime 2945 || passwordExpWarned || passwordRetryCount || retryCountResetTime || 2946 accountUnlockTime || passwordAllowChangeTime") 2947 ( 2948 version 3.0; 2949 acl "Anonymous access"; 2950 allow (read, search, compare) userdn = "ldap:///anyone"; 2951 ) 2952aci: (targetattr != "nsroledn || aci || nsLookThroughLimit || nsSizeLimit || 2953 nsTimeLimit || nsIdleTimeout || passwordPolicySubentry || 2954 passwordExpirationTime || passwordExpWarned || passwordRetryCount || 2955 retryCountResetTime || accountUnlockTime || passwordHistory || 2956 passwordAllowChangeTime") 2957 ( 2958 version 3.0; 2959 acl "Allow self entry modification except for some attributes"; 2960 allow (write) userdn = "ldap:///self"; 2961 ) 2962aci: (targetattr = "*") 2963 ( 2964 version 3.0; 2965 acl "Configuration Administrator"; 2966 allow (all) userdn = "ldap:///uid=admin,ou=Administrators, 2967 ou=TopologyManagement,o=NetscapeRoot"; 2968 ) 2969aci: (targetattr ="*") 2970 ( 2971 version 3.0; 2972 acl "Configuration Administrators Group"; 2973 allow (all) groupdn = "ldap:///cn=Configuration Administrators, 2974 ou=Groups,ou=TopologyManagement,o=NetscapeRoot"; 2975 ) 2976EOF 2977` 2978 } 2979 [ $DEBUG -eq 1 ] && cat <<EOF 2980DEBUG: ACI for ${LDAP_SUFFIX} is 2981${LDAP_SUFFIX_ACI} 2982EOF 2983 2984 NEED_CREATE_BACKEND= 2985 2986 # check the suffix mapping tree ... 2987 # if mapping exists, suffix should work, otherwise DS inconsistent 2988 # NOTE: -b 'cn=mapping tree,cn=config' -s one 'cn=\"$1\"' won't work 2989 # in case of 'cn' value in LDAP is not quoted by '"', 2990 # -b 'cn=\"$1\",cn=mapping tree,cn=config' works in all cases 2991 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ 2992 -b 'cn=\"${LDAP_SUFFIX}\",cn=mapping tree,cn=config' \ 2993 -s base 'objectclass=*' dn ${VERB}" && 2994 { 2995 [ $DEBUG -eq 1 ] && ${ECHO} "Suffix mapping already exists" 2996 # get_backend() either gets IDS_DATABASE or exits 2997 get_backend 2998 return 0 2999 } 3000 3001 # no suffix mapping, just in case check ldbm backends consistency - 3002 # there are must be NO any databases pointing to LDAP_SUFFIX 3003 [ -n "`${EVAL} \"${LDAPSEARCH} ${LDAP_ARGS} \ 3004 -b 'cn=ldbm database,cn=plugins,cn=config' \ 3005 -s one 'nsslapd-suffix=${LDAP_SUFFIX}' dn\" 2>/dev/null`" ] && 3006 { 3007 display_msg sfx_config_incons 3008 return 1 3009 } 3010 3011 # ok, no suffix mapping, no ldbm database 3012 [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: backend needs to be created ..." 3013 NEED_CREATE_BACKEND=1 3014 return 0 3015} 3016 3017# 3018# prepare for the suffix backend creation 3019# 3020# input : IDS_DATABASE - requested ldbm db name (must be not null) 3021# in/out : IDS_DATABASE_AVAIL - available ldbm db name 3022# return : 0 - ldbm db name ok 3023# 1 - IDS_DATABASE exists, 3024# so IDS_DATABASE_AVAIL contains available name 3025# 2 - unable to find any available name 3026# 3027prep_create_sfx_backend() 3028{ 3029 [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_backend()" 3030 3031 # check if requested name available 3032 [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0 3033 3034 # get the list of database names start with a requested name 3035 _LDBM_DBS=`${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ 3036 -b 'cn=ldbm database,cn=plugins,cn=config' \ 3037 -s one 'cn=${IDS_DATABASE}*' cn"` 2>/dev/null 3038 3039 # find available db name based on a requested name 3040 _i=""; _i_MAX=10 3041 while [ ${_i:-0} -lt ${_i_MAX} ] 3042 do 3043 _name="${IDS_DATABASE}${_i}" 3044 ${ECHO} "${_LDBM_DBS}" | ${GREP} -i "^cn=${_name}$" >/dev/null 2>&1 || 3045 { 3046 IDS_DATABASE_AVAIL="${_name}" 3047 break 3048 } 3049 _i=`expr ${_i:-0} + 1` 3050 done 3051 3052 [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0 3053 3054 [ -n "${IDS_DATABASE_AVAIL}" ] && 3055 { 3056 display_msg ldbm_db_exist 3057 return 1 3058 } 3059 3060 display_msg unable_find_db_name 3061 return 2 3062} 3063 3064# 3065# add suffix if needed, 3066# suffix entry and backend MUST be prepared by 3067# prep_create_sfx_entry and prep_create_sfx_backend correspondingly 3068# 3069# input : NEED_CREATE_SUFFIX, LDAP_SUFFIX, LDAP_SUFFIX_OBJ, _ATT, _VAL 3070# LDAP_SUFFIX_ACI, NEED_CREATE_BACKEND, IDS_DATABASE 3071# return : 0 - suffix successfully created, otherwise error occured 3072# 3073add_suffix() 3074{ 3075 [ $DEBUG -eq 1 ] && ${ECHO} "In add_suffix()" 3076 3077 [ -n "${NEED_CREATE_SUFFIX}" ] || return 0 3078 3079 [ -n "${NEED_CREATE_BACKEND}" ] && 3080 { 3081 ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF 3082dn: cn="${LDAP_SUFFIX}",cn=mapping tree,cn=config 3083objectclass: top 3084objectclass: extensibleObject 3085objectclass: nsMappingTree 3086cn: ${LDAP_SUFFIX} 3087nsslapd-state: backend 3088nsslapd-backend: ${IDS_DATABASE} 3089 3090dn: cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config 3091objectclass: top 3092objectclass: extensibleObject 3093objectclass: nsBackendInstance 3094cn: ${IDS_DATABASE} 3095nsslapd-suffix: ${LDAP_SUFFIX} 3096EOF 3097 [ $? -ne 0 ] && 3098 { 3099 display_msg create_ldbm_db_error 3100 return 1 3101 } 3102 3103 ${ECHO} " ${STEP}. Database ${IDS_DATABASE} successfully created" 3104 STEP=`expr $STEP + 1` 3105 } 3106 3107 ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF 3108dn: ${LDAP_SUFFIX} 3109objectclass: ${LDAP_SUFFIX_OBJ} 3110${_ATT}: ${_VAL} 3111${LDAP_SUFFIX_ACI} 3112EOF 3113 [ $? -ne 0 ] && 3114 { 3115 display_msg create_suffix_entry_error 3116 return 1 3117 } 3118 3119 ${ECHO} " ${STEP}. Suffix ${LDAP_SUFFIX} successfully created" 3120 STEP=`expr $STEP + 1` 3121 return 0 3122} 3123 3124# 3125# interactively get suffix and related info from a user 3126# 3127# input : LDAP_BASEDN - Base DN 3128# output : LDAP_SUFFIX - Suffix, _ATT, _VAL - id attribute and its value; 3129# LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - objectclass and aci; 3130# NEED_CREATE_BACKEND - tells whether backend needs to be created; 3131# IDS_DATABASE - prepared ldbm db name 3132# return : 0 - user gave a correct suffix 3133# 1 - suffix given by user cann't be created 3134# 3135get_suffix() 3136{ 3137 [ $DEBUG -eq 1 ] && ${ECHO} "In get_suffix()" 3138 3139 while : 3140 do 3141 get_ans "Enter suffix to be created (b=back/h=help):" ${LDAP_BASEDN} 3142 case "${ANS}" in 3143 [Hh] | Help | help | \? ) display_msg create_suffix_help ;; 3144 [Bb] | Back | back | \< ) return 1 ;; 3145 * ) 3146 format_string "${ANS}" 3147 LDAP_SUFFIX=${FMT_STR} 3148 prep_create_sfx_entry || continue 3149 3150 [ -n "${NEED_CREATE_BACKEND}" ] && 3151 { 3152 IDS_DATABASE_AVAIL= # reset the available db name 3153 3154 reenter_suffix= 3155 while : 3156 do 3157 get_ans "Enter ldbm database name (b=back/h=help):" \ 3158 ${IDS_DATABASE_AVAIL:-${_VAL}} 3159 case "${ANS}" in 3160 [Hh] | \? ) display_msg enter_ldbm_db_help ;; 3161 [Bb] | \< ) reenter_suffix=1; break ;; 3162 * ) 3163 IDS_DATABASE="${ANS}" 3164 prep_create_sfx_backend && break 3165 esac 3166 done 3167 [ -n "${reenter_suffix}" ] && continue 3168 3169 [ $DEBUG -eq 1 ] && cat <<EOF 3170DEBUG: backend name for suffix ${LDAP_SUFFIX} will be ${IDS_DATABASE} 3171EOF 3172 } 3173 3174 # eventually everything is prepared 3175 return 0 3176 ;; 3177 esac 3178 done 3179} 3180 3181# 3182# print out a script which sets LDAP suffix related preferences 3183# 3184print_suffix_config() 3185{ 3186 cat <<EOF2 3187# LDAP suffix related preferences used only if needed 3188IDS_DATABASE="${IDS_DATABASE}" 3189LDAP_SUFFIX_OBJ="$LDAP_SUFFIX_OBJ" 3190LDAP_SUFFIX_ACI=\`cat <<EOF 3191${LDAP_SUFFIX_ACI} 3192EOF 3193\` 3194export IDS_DATABASE LDAP_SUFFIX_OBJ LDAP_SUFFIX_ACI 3195EOF2 3196} 3197 3198# 3199# check_basedn_suffix(): check that there is an existing 3200# valid suffix to hold current base DN 3201# return: 3202# 0: valid suffix found or new one should be created, 3203# NEED_CREATE_SUFFIX flag actually indicates that 3204# 1: some error occures 3205# 3206check_basedn_suffix() 3207{ 3208 [ $DEBUG -eq 1 ] && ${ECHO} "In check_basedn_suffix()" 3209 3210 NEED_CREATE_SUFFIX= 3211 3212 # find out existing suffixes 3213 discover_serv_suffix 3214 3215 ${ECHO} " Validating LDAP Base DN and Suffix ..." 3216 3217 # check that LDAP Base DN might be added 3218 cur_ldap_entry=${LDAP_BASEDN} 3219 prev_ldap_entry= 3220 while [ "${cur_ldap_entry}" != "${prev_ldap_entry}" ] 3221 do 3222 [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP entry: ${cur_ldap_entry}" 3223 ${LDAPSEARCH} ${SERVER_ARGS} -b "${cur_ldap_entry}" \ 3224 -s one "objectclass=*" > /dev/null 2>&1 3225 if [ $? -eq 0 ]; then 3226 break 3227 else 3228 prev_ldap_entry=${cur_ldap_entry} 3229 cur_ldap_entry=`${ECHO} ${cur_ldap_entry} | cut -f2- -d','` 3230 fi 3231 done 3232 3233 if [ "${cur_ldap_entry}" = "${prev_ldap_entry}" ]; then 3234 ${ECHO} " No valid suffixes were found for Base DN ${LDAP_BASEDN}" 3235 3236 NEED_CREATE_SUFFIX=1 3237 return 0 3238 3239 else 3240 [ $DEBUG -eq 1 ] && ${ECHO} "found valid LDAP entry: ${cur_ldap_entry}" 3241 3242 # Now looking for relevant suffix for this entry. 3243 # LDAP_SUFFIX will then be used to add necessary 3244 # base objects. See add_base_objects(). 3245 format_string "${cur_ldap_entry}" 3246 lower_entry="${FMT_STR}" 3247 [ $DEBUG -eq 1 ] && ${ECHO} "final suffix list: ${LDAP_SUFFIX_LIST}" 3248 oIFS=$IFS 3249 [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to new line" 3250 IFS=' 3251' 3252 for suff in ${LDAP_SUFFIX_LIST} 3253 do 3254 [ $DEBUG -eq 1 ] && ${ECHO} "testing suffix: ${suff}" 3255 format_string "${suff}" 3256 lower_suff="${FMT_STR}" 3257 if [ "${lower_entry}" = "${lower_suff}" ]; then 3258 LDAP_SUFFIX="${suff}" 3259 break 3260 else 3261 dcstmp=`basename "${lower_entry}" "${lower_suff}"` 3262 if [ "${dcstmp}" = "${lower_entry}" ]; then 3263 # invalid suffix, try next one 3264 continue 3265 else 3266 # valid suffix found 3267 LDAP_SUFFIX="${suff}" 3268 break 3269 fi 3270 fi 3271 done 3272 [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to original value" 3273 IFS=$oIFS 3274 3275 [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_SUFFIX: ${LDAP_SUFFIX}" 3276 3277 if [ -z "${LDAP_SUFFIX}" ]; then 3278 # should not happen, since we found the entry 3279 ${ECHO} "Could not find a valid suffix for ${LDAP_BASEDN}." 3280 ${ECHO} "Exiting." 3281 return 1 3282 fi 3283 3284 # Getting relevant database (backend) 3285 # IDS_DATABASE will then be used to create indexes. 3286 get_backend 3287 3288 return 0 3289 fi 3290} 3291 3292# 3293# discover_serv_suffix(): This function queries the server to find 3294# suffixes available 3295# return: 0: OK, suffix found 3296# 1: suffix not determined 3297discover_serv_suffix() 3298{ 3299 [ $DEBUG -eq 1 ] && ${ECHO} "In discover_serv_suffix()" 3300 3301 # Search the server for the TOP of the TREE. 3302 ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkTOP 2>&1 3303 ${GREP} -i namingcontexts ${TMPDIR}/checkTOP | \ 3304 ${GREP} -i -v NetscapeRoot > ${TMPDIR}/treeTOP 3305 NUM_TOP=`wc -l ${TMPDIR}/treeTOP | awk '{print $1}'` 3306 case $NUM_TOP in 3307 0) 3308 [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: No suffix found in LDAP tree" 3309 return 1 3310 ;; 3311 *) # build the list of suffixes; take out 'namingContexts=' in 3312 # each line of ${TMPDIR}/treeTOP 3313 LDAP_SUFFIX_LIST=`cat ${TMPDIR}/treeTOP | 3314 awk '{ printf("%s\n",substr($0,16,length-15)) }'` 3315 ;; 3316 esac 3317 3318 [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX_LIST = $LDAP_SUFFIX_LIST" 3319 return 0 3320} 3321 3322 3323# 3324# modify_cn(): Change the cn from MUST to MAY in ipNetwork. 3325# 3326modify_cn() 3327{ 3328 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_cn()" 3329 3330 ( cat <<EOF 3331dn: cn=schema 3332changetype: modify 3333add: objectclasses 3334objectclasses: ( 1.3.6.1.1.1.2.7 NAME 'ipNetwork' DESC 'Standard LDAP objectclass' SUP top STRUCTURAL MUST ( ipNetworkNumber ) MAY ( ipNetmaskNumber $ manager $ cn $ l $ description ) X-ORIGIN 'RFC 2307' )) 3335EOF 3336) > ${TMPDIR}/ipNetwork_cn 3337 3338 # Modify the cn for ipNetwork. 3339 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ipNetwork_cn ${VERB}" 3340 if [ $? -ne 0 ]; then 3341 ${ECHO} " ERROR: update of cn for ipNetwork failed!" 3342 cleanup 3343 exit 1 3344 fi 3345} 3346 3347 3348# modify_timelimit(): Modify timelimit to user value. 3349modify_timelimit() 3350{ 3351 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_timelimit()" 3352 3353 # Here doc to modify timelimit. 3354 ( cat <<EOF 3355dn: cn=config 3356changetype: modify 3357replace: nsslapd-timelimit 3358nsslapd-timelimit: ${IDS_TIMELIMIT} 3359EOF 3360) > ${TMPDIR}/ids_timelimit 3361 3362 # Add the entry. 3363 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_timelimit ${VERB}" 3364 if [ $? -ne 0 ]; then 3365 ${ECHO} " ERROR: update of nsslapd-timelimit failed!" 3366 cleanup 3367 exit 1 3368 fi 3369 3370 # Display messages for modifications made in patch. 3371 ${ECHO} " ${STEP}. Changed timelimit to ${IDS_TIMELIMIT} in cn=config." 3372 STEP=`expr $STEP + 1` 3373} 3374 3375 3376# modify_sizelimit(): Modify sizelimit to user value. 3377modify_sizelimit() 3378{ 3379 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_sizelimit()" 3380 3381 # Here doc to modify sizelimit. 3382 ( cat <<EOF 3383dn: cn=config 3384changetype: modify 3385replace: nsslapd-sizelimit 3386nsslapd-sizelimit: ${IDS_SIZELIMIT} 3387EOF 3388) > ${TMPDIR}/ids_sizelimit 3389 3390 # Add the entry. 3391 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_sizelimit ${VERB}" 3392 if [ $? -ne 0 ]; then 3393 ${ECHO} " ERROR: update of nsslapd-sizelimit failed!" 3394 cleanup 3395 exit 1 3396 fi 3397 3398 # Display messages for modifications made in patch. 3399 ${ECHO} " ${STEP}. Changed sizelimit to ${IDS_SIZELIMIT} in cn=config." 3400 STEP=`expr $STEP + 1` 3401} 3402 3403 3404# modify_pwd_crypt(): Modify the passwd storage scheme to support CRYPT. 3405modify_pwd_crypt() 3406{ 3407 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_pwd_crypt()" 3408 3409 # Here doc to modify passwordstoragescheme. 3410 # IDS 5.2 moved passwordchangesceme off to a new data structure. 3411 if [ $IDS_MAJVER -le 5 ] && [ $IDS_MINVER -le 1 ]; then 3412 ( cat <<EOF 3413dn: cn=config 3414changetype: modify 3415replace: passwordstoragescheme 3416passwordstoragescheme: crypt 3417EOF 3418 ) > ${TMPDIR}/ids_crypt 3419 else 3420 ( cat <<EOF 3421dn: cn=Password Policy,cn=config 3422changetype: modify 3423replace: passwordstoragescheme 3424passwordstoragescheme: crypt 3425EOF 3426 ) > ${TMPDIR}/ids_crypt 3427 fi 3428 3429 # Add the entry. 3430 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_crypt ${VERB}" 3431 if [ $? -ne 0 ]; then 3432 ${ECHO} " ERROR: update of passwordstoragescheme failed!" 3433 cleanup 3434 exit 1 3435 fi 3436 3437 # Display messages for modifications made in patch. 3438 ${ECHO} " ${STEP}. Changed passwordstoragescheme to \"crypt\" in cn=config." 3439 STEP=`expr $STEP + 1` 3440} 3441 3442 3443# 3444# add_eq_indexes(): Add indexes to improve search performance. 3445# 3446add_eq_indexes() 3447{ 3448 [ $DEBUG -eq 1 ] && ${ECHO} "In add_eq_indexes()" 3449 3450 # Set eq indexes to add. 3451 _INDEXES="uidNumber ipNetworkNumber gidnumber oncrpcnumber automountKey" 3452 3453 if [ -z "${IDS_DATABASE}" ]; then 3454 get_backend 3455 fi 3456 3457 # Set _EXT to use as shortcut. 3458 _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" 3459 3460 # Display message to id current step. 3461 ${ECHO} " ${STEP}. Processing eq,pres indexes:" 3462 STEP=`expr $STEP + 1` 3463 3464 # For loop to create indexes. 3465 for i in ${_INDEXES}; do 3466 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" 3467 3468 # Check if entry exists first, if so, skip to next. 3469 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" -s base \ 3470 \"objectclass=*\" > /dev/null 2>&1" 3471 if [ $? -eq 0 ]; then 3472 # Display index skipped. 3473 ${ECHO} " ${i} (eq,pres) skipped already exists" 3474 continue 3475 fi 3476 3477 # Here doc to create LDIF. 3478 ( cat <<EOF 3479dn: cn=${i},${_EXT} 3480objectClass: top 3481objectClass: nsIndex 3482cn: ${i} 3483nsSystemIndex: false 3484nsIndexType: pres 3485nsIndexType: eq 3486EOF 3487) > ${TMPDIR}/index_${i} 3488 3489 # Add the index. 3490 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}" 3491 if [ $? -ne 0 ]; then 3492 ${ECHO} " ERROR: Adding EQ,PRES index for ${i} failed!" 3493 cleanup 3494 exit 1 3495 fi 3496 3497 # Build date for task name. 3498 _YR=`date '+%y'` 3499 _MN=`date '+%m'` 3500 _DY=`date '+%d'` 3501 _H=`date '+%H'` 3502 _M=`date '+%M'` 3503 _S=`date '+%S'` 3504 3505 # Build task name 3506 TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}" 3507 3508 # Build the task entry to add. 3509 ( cat <<EOF 3510dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config 3511changetype: add 3512objectclass: top 3513objectclass: extensibleObject 3514cn: ${TASKNAME} 3515nsInstance: ${IDS_DATABASE} 3516nsIndexAttribute: ${i} 3517EOF 3518) > ${TMPDIR}/task_${i} 3519 3520 # Add the task. 3521 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}" 3522 if [ $? -ne 0 ]; then 3523 ${ECHO} " ERROR: Adding task for ${i} failed!" 3524 cleanup 3525 exit 1 3526 fi 3527 3528 # Wait for task to finish, display current status. 3529 while : 3530 do 3531 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ 3532 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \ 3533 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1" 3534 ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1 3535 if [ $? -ne 0 ]; then 3536 break 3537 fi 3538 TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" | 3539 head -1 | cut -d: -f2` 3540 ${ECHO} " ${i} (eq,pres) $TASK_STATUS \r\c" 3541 ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1 3542 if [ $? -eq 0 ]; then 3543 break 3544 fi 3545 sleep 2 3546 done 3547 3548 # Print newline because of \c. 3549 ${ECHO} " " 3550 done 3551} 3552 3553 3554# 3555# add_sub_indexes(): Add indexes to improve search performance. 3556# 3557add_sub_indexes() 3558{ 3559 [ $DEBUG -eq 1 ] && ${ECHO} "In add_sub_indexes()" 3560 3561 # Set eq indexes to add. 3562 _INDEXES="ipHostNumber membernisnetgroup nisnetgrouptriple" 3563 3564 # Set _EXT to use as shortcut. 3565 _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" 3566 3567 3568 # Display message to id current step. 3569 ${ECHO} " ${STEP}. Processing eq,pres,sub indexes:" 3570 STEP=`expr $STEP + 1` 3571 3572 # For loop to create indexes. 3573 for i in ${_INDEXES}; do 3574 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" 3575 3576 # Check if entry exists first, if so, skip to next. 3577 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" \ 3578 -s base \"objectclass=*\" > /dev/null 2>&1" 3579 if [ $? -eq 0 ]; then 3580 # Display index skipped. 3581 ${ECHO} " ${i} (eq,pres,sub) skipped already exists" 3582 continue 3583 fi 3584 3585 # Here doc to create LDIF. 3586 ( cat <<EOF 3587dn: cn=${i},${_EXT} 3588objectClass: top 3589objectClass: nsIndex 3590cn: ${i} 3591nsSystemIndex: false 3592nsIndexType: pres 3593nsIndexType: eq 3594nsIndexType: sub 3595EOF 3596) > ${TMPDIR}/index_${i} 3597 3598 # Add the index. 3599 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}" 3600 if [ $? -ne 0 ]; then 3601 ${ECHO} " ERROR: Adding EQ,PRES,SUB index for ${i} failed!" 3602 cleanup 3603 exit 1 3604 fi 3605 3606 # Build date for task name. 3607 _YR=`date '+%y'` 3608 _MN=`date '+%m'` 3609 _DY=`date '+%d'` 3610 _H=`date '+%H'` 3611 _M=`date '+%M'` 3612 _S=`date '+%S'` 3613 3614 # Build task name 3615 TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}" 3616 3617 # Build the task entry to add. 3618 ( cat <<EOF 3619dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config 3620changetype: add 3621objectclass: top 3622objectclass: extensibleObject 3623cn: ${TASKNAME} 3624nsInstance: ${IDS_DATABASE} 3625nsIndexAttribute: ${i} 3626EOF 3627) > ${TMPDIR}/task_${i} 3628 3629 # Add the task. 3630 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}" 3631 if [ $? -ne 0 ]; then 3632 ${ECHO} " ERROR: Adding task for ${i} failed!" 3633 cleanup 3634 exit 1 3635 fi 3636 3637 # Wait for task to finish, display current status. 3638 while : 3639 do 3640 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ 3641 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \ 3642 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1" 3643 ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1 3644 if [ $? -ne 0 ]; then 3645 break 3646 fi 3647 TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" | 3648 head -1 | cut -d: -f2` 3649 ${ECHO} " ${i} (eq,pres,sub) $TASK_STATUS \r\c" 3650 ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1 3651 if [ $? -eq 0 ]; then 3652 break 3653 fi 3654 sleep 2 3655 done 3656 3657 # Print newline because of \c. 3658 ${ECHO} " " 3659 done 3660} 3661 3662 3663# 3664# add_vlv_indexes(): Add VLV indexes to improve search performance. 3665# 3666add_vlv_indexes() 3667{ 3668 [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_indexes()" 3669 3670 # Set eq indexes to add. 3671 # Note semi colon separators because some filters contain colons 3672 _INDEX1="${LDAP_DOMAIN}.getgrent;${LDAP_DOMAIN}_group_vlv_index;ou=group;objectClass=posixGroup" 3673 _INDEX2="${LDAP_DOMAIN}.gethostent;${LDAP_DOMAIN}_hosts_vlv_index;ou=hosts;objectClass=ipHost" 3674 _INDEX3="${LDAP_DOMAIN}.getnetent;${LDAP_DOMAIN}_networks_vlv_index;ou=networks;objectClass=ipNetwork" 3675 _INDEX4="${LDAP_DOMAIN}.getpwent;${LDAP_DOMAIN}_passwd_vlv_index;ou=people;objectClass=posixAccount" 3676 _INDEX5="${LDAP_DOMAIN}.getrpcent;${LDAP_DOMAIN}_rpc_vlv_index;ou=rpc;objectClass=oncRpc" 3677 _INDEX6="${LDAP_DOMAIN}.getspent;${LDAP_DOMAIN}_shadow_vlv_index;ou=people;objectClass=shadowAccount" 3678 3679 # Indexes added during NIS to LDAP transition 3680 _INDEX7="${LDAP_DOMAIN}.getauhoent;${LDAP_DOMAIN}_auho_vlv_index;automountmapname=auto_home;objectClass=automount" 3681 _INDEX8="${LDAP_DOMAIN}.getsoluent;${LDAP_DOMAIN}_solu_vlv_index;ou=people;objectClass=SolarisUserAttr" 3682 _INDEX9="${LDAP_DOMAIN}.getauduent;${LDAP_DOMAIN}_audu_vlv_index;ou=people;objectClass=SolarisAuditUser" 3683 _INDEX10="${LDAP_DOMAIN}.getauthent;${LDAP_DOMAIN}_auth_vlv_index;ou=SolarisAuthAttr;objectClass=SolarisAuthAttr" 3684 _INDEX11="${LDAP_DOMAIN}.getexecent;${LDAP_DOMAIN}_exec_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisExecAttr)(SolarisKernelSecurityPolicy=*)" 3685 _INDEX12="${LDAP_DOMAIN}.getprofent;${LDAP_DOMAIN}_prof_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisProfAttr)(SolarisAttrLongDesc=*)" 3686 _INDEX13="${LDAP_DOMAIN}.getmailent;${LDAP_DOMAIN}_mail_vlv_index;ou=aliases;objectClass=mailGroup" 3687 _INDEX14="${LDAP_DOMAIN}.getbootent;${LDAP_DOMAIN}__boot_vlv_index;ou=ethers;&(objectClass=bootableDevice)(bootParameter=*)" 3688 _INDEX15="${LDAP_DOMAIN}.getethent;${LDAP_DOMAIN}_ethers_vlv_index;ou=ethers;&(objectClass=ieee802Device)(macAddress=*)" 3689 _INDEX16="${LDAP_DOMAIN}.getngrpent;${LDAP_DOMAIN}_netgroup_vlv_index;ou=netgroup;objectClass=nisNetgroup" 3690 _INDEX17="${LDAP_DOMAIN}.getipnent;${LDAP_DOMAIN}_ipn_vlv_index;ou=networks;&(objectClass=ipNetwork)(cn=*)" 3691 _INDEX18="${LDAP_DOMAIN}.getmaskent;${LDAP_DOMAIN}_mask_vlv_index;ou=networks;&(objectClass=ipNetwork)(ipNetmaskNumber=*)" 3692 _INDEX19="${LDAP_DOMAIN}.getprent;${LDAP_DOMAIN}_pr_vlv_index;ou=printers;objectClass=printerService" 3693 _INDEX20="${LDAP_DOMAIN}.getip4ent;${LDAP_DOMAIN}_ip4_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*.*)" 3694 _INDEX21="${LDAP_DOMAIN}.getip6ent;${LDAP_DOMAIN}_ip6_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*:*)" 3695 3696 _INDEXES="$_INDEX1 $_INDEX2 $_INDEX3 $_INDEX4 $_INDEX5 $_INDEX6 $_INDEX7 $_INDEX8 $_INDEX9 $_INDEX10 $_INDEX11 $_INDEX12 $_INDEX13 $_INDEX14 $_INDEX15 $_INDEX16 $_INDEX17 $_INDEX18 $_INDEX19 $_INDEX20 $_INDEX21 " 3697 3698 3699 # Set _EXT to use as shortcut. 3700 _EXT="cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" 3701 3702 3703 # Display message to id current step. 3704 ${ECHO} " ${STEP}. Processing VLV indexes:" 3705 STEP=`expr $STEP + 1` 3706 3707 # Reset temp file for vlvindex commands. 3708 [ -f ${TMPDIR}/vlvindex_list ] && rm ${TMPDIR}/vlvindex_list 3709 touch ${TMPDIR}/vlvindex_list 3710 3711 # Get the instance name from iDS server. 3712 _INSTANCE="<server-instance>" # Default to old output. 3713 3714 eval "${LDAPSEARCH} -v ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-instancedir | ${GREP} 'nsslapd-instancedir=' | cut -d'=' -f2- > ${TMPDIR}/instance_name 2>&1" 3715 3716 ${GREP} "slapd-" ${TMPDIR}/instance_name > /dev/null 2>&1 # Check if seems right? 3717 if [ $? -eq 0 ]; then # If success, grab name after "slapd-". 3718 _INST_DIR=`cat ${TMPDIR}/instance_name` 3719 _INSTANCE=`basename "${_INST_DIR}" | cut -d'-' -f2-` 3720 fi 3721 3722 # For loop to create indexes. 3723 for p in ${_INDEXES}; do 3724 [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" 3725 3726 # Break p (pair) into i and j parts. 3727 i=`${ECHO} $p | cut -d';' -f1` 3728 j=`${ECHO} $p | cut -d';' -f2` 3729 k=`${ECHO} $p | cut -d';' -f3` 3730 m=`${ECHO} $p | cut -d';' -f4` 3731 3732 # Set _jEXT to use as shortcut. 3733 _jEXT="cn=${j},${_EXT}" 3734 3735 # Check if entry exists first, if so, skip to next. 3736 ${LDAPSEARCH} ${SERVER_ARGS} -b "cn=${i},${_jEXT}" -s base "objectclass=*" > /dev/null 2>&1 3737 if [ $? -eq 0 ]; then 3738 # Display index skipped. 3739 ${ECHO} " ${i} vlv_index skipped already exists" 3740 continue 3741 fi 3742 3743 # Compute the VLV Scope from the LDAP_SEARCH_SCOPE. 3744 # NOTE: A value of "base (0)" does not make sense. 3745 case "$LDAP_SEARCH_SCOPE" in 3746 sub) VLV_SCOPE="2" ;; 3747 *) VLV_SCOPE="1" ;; 3748 esac 3749 3750 # Here doc to create LDIF. 3751 ( cat <<EOF 3752dn: ${_jEXT} 3753objectClass: top 3754objectClass: vlvSearch 3755cn: ${j} 3756vlvbase: ${k},${LDAP_BASEDN} 3757vlvscope: ${VLV_SCOPE} 3758vlvfilter: (${m}) 3759aci: (target="ldap:///${_jEXT}")(targetattr="*")(version 3.0; acl "Config";allow(read,search,compare)userdn="ldap:///anyone";) 3760 3761dn: cn=${i},${_jEXT} 3762cn: ${i} 3763vlvSort: cn uid 3764objectclass: top 3765objectclass: vlvIndex 3766EOF 3767) > ${TMPDIR}/vlv_index_${i} 3768 3769 # Add the index. 3770 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}" 3771 if [ $? -ne 0 ]; then 3772 ${ECHO} " ERROR: Adding VLV index for ${i} failed!" 3773 cleanup 3774 exit 1 3775 fi 3776 3777 # Print message that index was created. 3778 ${ECHO} " ${i} vlv_index Entry created" 3779 3780 # Add command to list of vlvindex commands to run. 3781 ${ECHO} " directoryserver -s ${_INSTANCE} vlvindex -n ${IDS_DATABASE} -T ${i}" >> ${TMPDIR}/vlvindex_list 3782 done 3783} 3784 3785 3786# 3787# display_vlv_cmds(): Display VLV index commands to run on server. 3788# 3789display_vlv_cmds() 3790{ 3791 if [ -s "${TMPDIR}/vlvindex_list" ]; then 3792 display_msg display_vlv_list 3793 cat ${TMPDIR}/vlvindex_list 3794 fi 3795} 3796 3797 3798# 3799# update_schema_attr(): Update Schema to support Naming. 3800# 3801update_schema_attr() 3802{ 3803 [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_attr()" 3804 3805 ( cat <<EOF 3806dn: cn=schema 3807changetype: modify 3808add: attributetypes 3809attributetypes: ( 1.3.6.1.1.1.1.28 NAME 'nisPublickey' DESC 'NIS public key' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3810attributetypes: ( 1.3.6.1.1.1.1.29 NAME 'nisSecretkey' DESC 'NIS secret key' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3811attributetypes: ( 1.3.6.1.1.1.1.30 NAME 'nisDomain' DESC 'NIS domain' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3812attributetypes: ( 1.3.6.1.1.1.1.31 NAME 'automountMapName' DESC 'automount Map Name' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3813attributetypes: ( 1.3.6.1.1.1.1.32 NAME 'automountKey' DESC 'automount Key Value' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3814attributetypes: ( 1.3.6.1.1.1.1.33 NAME 'automountInformation' DESC 'automount information' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3815attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.12 NAME 'nisNetIdUser' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3816attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.13 NAME 'nisNetIdGroup' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3817attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.14 NAME 'nisNetIdHost' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3818attributetypes: ( rfc822mailMember-oid NAME 'rfc822mailMember' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3819attributetypes: ( 2.16.840.1.113730.3.1.30 NAME 'mgrpRFC822MailMember' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3820attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.15 NAME 'SolarisLDAPServers' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3821attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.16 NAME 'SolarisSearchBaseDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) 3822attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.17 NAME 'SolarisCacheTTL' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3823attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.18 NAME 'SolarisBindDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) 3824attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.19 NAME 'SolarisBindPassword' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3825attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.20 NAME 'SolarisAuthMethod' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') 3826attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.21 NAME 'SolarisTransportSecurity' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') 3827attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.22 NAME 'SolarisCertificatePath' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3828attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.23 NAME 'SolarisCertificatePassword' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3829attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.24 NAME 'SolarisDataSearchDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') 3830attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.25 NAME 'SolarisSearchScope' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3831attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.26 NAME 'SolarisSearchTimeLimit' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) 3832attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.27 NAME 'SolarisPreferredServer' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') 3833attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.28 NAME 'SolarisPreferredServerOnly' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3834attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.29 NAME 'SolarisSearchReferral' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3835attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.4 NAME 'SolarisAttrKeyValue' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3836attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.5 NAME 'SolarisAuditAlways' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3837attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.6 NAME 'SolarisAuditNever' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3838attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.7 NAME 'SolarisAttrShortDesc' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3839attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.8 NAME 'SolarisAttrLongDesc' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3840attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.9 NAME 'SolarisKernelSecurityPolicy' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3841attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.10 NAME 'SolarisProfileType' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3842attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.11 NAME 'SolarisProfileId' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3843attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.12 NAME 'SolarisUserQualifier' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3844attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.13 NAME 'SolarisAttrReserved1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3845attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.14 NAME 'SolarisAttrReserved2' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3846attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.1 NAME 'SolarisProjectID' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) 3847attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.2 NAME 'SolarisProjectName' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) 3848attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.3 NAME 'SolarisProjectAttr' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3849attributetypes: ( memberGid-oid NAME 'memberGid' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3850attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList' DESC 'Default LDAP server host address used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3851attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase' DESC 'Default LDAP base DN used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) 3852attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList' DESC 'Preferred LDAP server host addresses to be used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3853attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit' DESC 'Maximum time in seconds a DUA should allow for a search to complete' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) 3854attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit' DESC 'Maximum time in seconds a DUA should allow for the bind operation to complete' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) 3855attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals' DESC 'Tells DUA if it should follow referrals returned by a DSA search result' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3856attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod' DESC 'A keystring which identifies the type of authentication method used to contact the DSA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3857attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL' DESC 'Time to live before a client DUA should re-read this configuration profile' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) 3858attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor' DESC 'LDAP search descriptor list used by Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) 3859attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap' DESC 'Attribute mappings used by a Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3860attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel' DESC 'Identifies type of credentials a DUA should use when binding to the LDAP server' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3861attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap' DESC 'Objectclass mappings used by a Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3862attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope' DESC 'Default search scope used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3863attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel' DESC 'Search scope used by a service of the DUA' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) 3864attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod' DESC 'Authentication Method used by a service of the DUA' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) 3865attributetypes:( 1.3.18.0.2.4.1140 NAME 'printer-uri' DESC 'A URI supported by this printer. This URI SHOULD be used as a relative distinguished name (RDN). If printer-xri-supported is implemented, then this URI value MUST be listed in a member value of printer-xri-supported.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) 3866attributetypes:( 1.3.18.0.2.4.1107 NAME 'printer-xri-supported' DESC 'The unordered list of XRI (extended resource identifiers) supported by this printer. Each member of the list consists of a URI (uniform resource identifier) followed by optional authentication and security metaparameters.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) 3867attributetypes:( 1.3.18.0.2.4.1135 NAME 'printer-name' DESC 'The site-specific administrative name of this printer, more end-user friendly than a URI.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3868attributetypes:( 1.3.18.0.2.4.1119 NAME 'printer-natural-language-configured' DESC 'The configured language in which error and status messages will be generated (by default) by this printer. Also, a possible language for printer string attributes set by operator, system administrator, or manufacturer. Also, the (declared) language of the "printer-name", "printer-location", "printer-info", and "printer-make-and-model" attributes of this printer. For example: "en-us" (US English) or "fr-fr" (French in France) Legal values of language tags conform to [RFC3066] "Tags for the Identification of Languages".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3869attributetypes:( 1.3.18.0.2.4.1136 NAME 'printer-location' DESC 'Identifies the location of the printer. This could include things like: "in Room 123A", "second floor of building XYZ".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3870attributetypes:( 1.3.18.0.2.4.1139 NAME 'printer-info' DESC 'Identifies the descriptive information about this printer. This could include things like: "This printer can be used for printing color transparencies for HR presentations", or "Out of courtesy for others, please print only small (1-5 page) jobs at this printer", or even "This printer is going away on July 1, 1997, please find a new printer".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3871attributetypes:( 1.3.18.0.2.4.1134 NAME 'printer-more-info' DESC 'A URI used to obtain more information about this specific printer. For example, this could be an HTTP type URI referencing an HTML page accessible to a Web Browser. The information obtained from this URI is intended for end user consumption.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) 3872attributetypes:( 1.3.18.0.2.4.1138 NAME 'printer-make-and-model' DESC 'Identifies the make and model of the device. The device manufacturer MAY initially populate this attribute.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3873attributetypes:( 1.3.18.0.2.4.1133 NAME 'printer-ipp-versions-supported' DESC 'Identifies the IPP protocol version(s) that this printer supports, including major and minor versions, i.e., the version numbers for which this Printer implementation meets the conformance requirements.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3874attributetypes:( 1.3.18.0.2.4.1132 NAME 'printer-multiple-document-jobs-supported' DESC 'Indicates whether or not the printer supports more than one document per job, i.e., more than one Send-Document or Send-Data operation with document data.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) 3875attributetypes:( 1.3.18.0.2.4.1109 NAME 'printer-charset-configured' DESC 'The configured charset in which error and status messages will be generated (by default) by this printer. Also, a possible charset for printer string attributes set by operator, system administrator, or manufacturer. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the "(preferred MIME name)" SHALL be used as the tag. For coherence with IPP Model, charset tags in this attribute SHALL be lowercase normalized. This attribute SHOULD be static (time of registration) and SHOULD NOT be dynamically refreshed attributetypes: (subsequently).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} SINGLE-VALUE ) 3876attributetypes:( 1.3.18.0.2.4.1131 NAME 'printer-charset-supported' DESC 'Identifies the set of charsets supported for attribute type values of type Directory String for this directory entry. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the preferred MIME name.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} ) 3877attributetypes:( 1.3.18.0.2.4.1137 NAME 'printer-generated-natural-language-supported' DESC 'Identifies the natural language(s) supported for this directory entry. For example: "en-us" (US English) or "fr-fr" (French in France). Legal values conform to [RFC3066], Tags for the Identification of Languages.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} ) 3878attributetypes:( 1.3.18.0.2.4.1130 NAME 'printer-document-format-supported' DESC 'The possible document formats in which data may be interpreted and printed by this printer. Legal values are MIME types come from the IANA Registry of Internet Media Types.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3879attributetypes:( 1.3.18.0.2.4.1129 NAME 'printer-color-supported' DESC 'Indicates whether this printer is capable of any type of color printing at all, including highlight color.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) 3880attributetypes:( 1.3.18.0.2.4.1128 NAME 'printer-compression-supported' DESC 'Compression algorithms supported by this printer. For example: "deflate, gzip". Legal values include; "none", "deflate" attributetypes: (public domain ZIP), "gzip" (GNU ZIP), "compress" (UNIX).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) 3881attributetypes:( 1.3.18.0.2.4.1127 NAME 'printer-pages-per-minute' DESC 'The nominal number of pages per minute which may be output by this printer (e.g., a simplex or black-and-white printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) 3882attributetypes:( 1.3.18.0.2.4.1126 NAME 'printer-pages-per-minute-color' DESC 'The nominal number of color pages per minute which may be output by this printer (e.g., a simplex or color printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) 3883attributetypes:( 1.3.18.0.2.4.1125 NAME 'printer-finishings-supported' DESC 'The possible finishing operations supported by this printer. Legal values include; "none", "staple", "punch", "cover", "bind", "saddle-stitch", "edge-stitch", "staple-top-left", "staple-bottom-left", "staple-top-right", "staple-bottom-right", "edge-stitch-left", "edge-stitch-top", "edge-stitch-right", "edge-stitch-bottom", "staple-dual-left", "staple-dual-top", "staple-dual-right", "staple-dual-bottom".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) 3884attributetypes:( 1.3.18.0.2.4.1124 NAME 'printer-number-up-supported' DESC 'The possible numbers of print-stream pages to impose upon a single side of an instance of a selected medium. Legal values include; 1, 2, and 4. Implementations may support other values.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 ) 3885attributetypes:( 1.3.18.0.2.4.1123 NAME 'printer-sides-supported' DESC 'The number of impression sides (one or two) and the two-sided impression rotations supported by this printer. Legal values include; "one-sided", "two-sided-long-edge", "two-sided-short-edge".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3886attributetypes:( 1.3.18.0.2.4.1122 NAME 'printer-media-supported' DESC 'The standard names/types/sizes (and optional color suffixes) of the media supported by this printer. For example: "iso-a4", "envelope", or "na-letter-white". Legal values conform to ISO 10175, Document Printing Application (DPA), and any IANA registered extensions.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) 3887attributetypes:( 1.3.18.0.2.4.1117 NAME 'printer-media-local-supported' DESC 'Site-specific names of media supported by this printer, in the language in "printer-natural-language-configured". For example: "purchasing-form" (site-specific name) as opposed to (in "printer-media-supported"): "na-letter" (standard keyword from ISO 10175).' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) 3888attributetypes:( 1.3.18.0.2.4.1121 NAME 'printer-resolution-supported' DESC 'List of resolutions supported for printing documents by this printer. Each resolution value is a string with 3 fields: 1) Cross feed direction resolution (positive integer), 2) Feed direction resolution (positive integer), 3) Resolution unit. Legal values are "dpi" (dots per inch) and "dpcm" (dots per centimeter). Each resolution field is delimited by ">". For example: "300> 300> dpi>".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) 3889attributetypes:( 1.3.18.0.2.4.1120 NAME 'printer-print-quality-supported' DESC 'List of print qualities supported for printing documents on this printer. For example: "draft, normal". Legal values include; "unknown", "draft", "normal", "high".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3890attributetypes:( 1.3.18.0.2.4.1110 NAME 'printer-job-priority-supported' DESC 'Indicates the number of job priority levels supported. An IPP conformant printer which supports job priority must always support a full range of priorities from "1" to "100" (to ensure consistent behavior), therefore this attribute describes the "granularity". Legal values of this attribute are from "1" to "100".' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) 3891attributetypes:( 1.3.18.0.2.4.1118 NAME 'printer-copies-supported' DESC 'The maximum number of copies of a document that may be printed as a single job. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) 3892attributetypes:( 1.3.18.0.2.4.1111 NAME 'printer-job-k-octets-supported' DESC 'The maximum size in kilobytes (1,024 octets actually) incoming print job that this printer will accept. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) 3893attributetypes:( 1.3.18.0.2.4.1112 NAME 'printer-current-operator' DESC 'The name of the current human operator responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3894attributetypes:( 1.3.18.0.2.4.1113 NAME 'printer-service-person' DESC 'The name of the current human service person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) 3895attributetypes:( 1.3.18.0.2.4.1114 NAME 'printer-delivery-orientation-supported' DESC 'The possible delivery orientations of pages as they are printed and ejected from this printer. Legal values include; "unknown", "face-up", and "face-down".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3896attributetypes:( 1.3.18.0.2.4.1115 NAME 'printer-stacking-order-supported' DESC 'The possible stacking order of pages as they are printed and ejected from this printer. Legal values include; "unknown", "first-to-last", "last-to-first".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3897attributetypes:( 1.3.18.0.2.4.1116 NAME 'printer-output-features-supported' DESC 'The possible output features supported by this printer. Legal values include; "unknown", "bursting", "decollating", "page-collating", "offset-stacking".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3898attributetypes:( 1.3.18.0.2.4.1108 NAME 'printer-aliases' DESC 'Site-specific administrative names of this printer in addition the printer name specified for printer-name.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) 3899attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.63 NAME 'sun-printer-bsdaddr' DESC 'Sets the server, print queue destination name and whether the client generates protocol extensions. "Solaris" specifies a Solaris print server extension. The value is represented by the following value: server "," destination ", Solaris".' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) 3900attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.64 NAME 'sun-printer-kvp' DESC 'This attribute contains a set of key value pairs which may have meaning to the print subsystem or may be user defined. Each value is represented by the following: key "=" value.' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) 3901attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.57 NAME 'nisplusTimeZone' DESC 'tzone column from NIS+ timezone table' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) 3902attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.67 NAME 'ipTnetTemplateName' DESC 'Trusted Solaris network template template_name' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) 3903attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.68 NAME 'ipTnetNumber' DESC 'Trusted Solaris network template ip_address' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) 3904EOF 3905) > ${TMPDIR}/schema_attr 3906 3907 # Add the entry. 3908 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_attr ${VERB}" 3909 if [ $? -ne 0 ]; then 3910 ${ECHO} " ERROR: update of schema attributes failed!" 3911 cleanup 3912 exit 1 3913 fi 3914 3915 # Display message that schema is updated. 3916 ${ECHO} " ${STEP}. Schema attributes have been updated." 3917 STEP=`expr $STEP + 1` 3918} 3919 3920 3921# 3922# update_schema_obj(): Update the schema objectclass definitions. 3923# 3924update_schema_obj() 3925{ 3926 [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_obj()" 3927 3928 # Add the objectclass definitions. 3929 ( cat <<EOF 3930dn: cn=schema 3931changetype: modify 3932add: objectclasses 3933objectclasses: ( 1.3.6.1.1.1.2.14 NAME 'NisKeyObject' SUP 'top' MUST (objectclass $ cn $ nisPublickey $ nisSecretkey) MAY (uidNumber $ description)) 3934 3935dn: cn=schema 3936changetype: modify 3937add: objectclasses 3938objectclasses: ( 1.3.6.1.1.1.2.15 NAME 'nisDomainObject' SUP 'top' MUST (objectclass $ nisDomain) MAY ()) 3939 3940dn: cn=schema 3941changetype: modify 3942add: objectclasses 3943objectclasses: ( 1.3.6.1.1.1.2.16 NAME 'automountMap' SUP 'top' MUST (objectclass $ automountMapName) MAY (description)) 3944 3945dn: cn=schema 3946changetype: modify 3947add: objectclasses 3948objectclasses: ( 1.3.6.1.1.1.2.17 NAME 'automount' SUP 'top' MUST (objectclass $ automountKey $ automountInformation ) MAY (description)) 3949 3950dn: cn=schema 3951changetype: modify 3952add: objectclasses 3953objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.7 NAME 'SolarisNamingProfile' SUP 'top' MUST (objectclass $ cn $ SolarisLDAPservers $ SolarisSearchBaseDN) MAY (SolarisBindDN $ SolarisBindPassword $ SolarisAuthMethod $ SolarisTransportSecurity $ SolarisCertificatePath $ SolarisCertificatePassword $ SolarisDataSearchDN $ SolarisSearchScope $ SolarisSearchTimeLimit $ SolarisPreferredServer $ SolarisPreferredServerOnly $ SolarisCacheTTL $ SolarisSearchReferral)) 3954 3955dn: cn=schema 3956changetype: modify 3957add: objectclasses 3958objectclasses: ( 2.16.840.1.113730.3.2.4 NAME 'mailGroup' SUP 'top' MUST (objectclass $ mail) MAY (cn $ mgrpRFC822MailMember)) 3959 3960dn: cn=schema 3961changetype: modify 3962add: objectclasses 3963objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.5 NAME 'nisMailAlias' SUP 'top' MUST (objectclass $ cn) MAY (rfc822mailMember)) 3964 3965dn: cn=schema 3966changetype: modify 3967add: objectclasses 3968objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.6 NAME 'nisNetId' SUP 'top' MUST (objectclass $ cn) MAY (nisNetIdUser $ nisNetIdGroup $ nisNetIdHost)) 3969 3970dn: cn=schema 3971changetype: modify 3972add: objectclasses 3973objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.2 NAME 'SolarisAuditUser' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisAuditAlways $ SolarisAuditNever)) 3974 3975dn: cn=schema 3976changetype: modify 3977add: objectclasses 3978objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.3 NAME 'SolarisUserAttr' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisUserQualifier $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrKeyValue)) 3979 3980dn: cn=schema 3981changetype: modify 3982add: objectclasses 3983objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.4 NAME 'SolarisAuthAttr' SUP 'top' MUST (objectclass $ cn) MAY (SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrShortDesc $ SolarisAttrLongDesc $ SolarisAttrKeyValue)) 3984 3985dn: cn=schema 3986changetype: modify 3987add: objectclasses 3988objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.5 NAME 'SolarisProfAttr' SUP 'top' MUST (objectclass $ cn) MAY (SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrLongDesc $ SolarisAttrKeyValue)) 3989 3990dn: cn=schema 3991changetype: modify 3992add: objectclasses 3993objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.6 NAME 'SolarisExecAttr' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisKernelSecurityPolicy $ SolarisProfileType $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisProfileID $ SolarisAttrKeyValue)) 3994 3995dn: cn=schema 3996changetype: modify 3997add: objectclasses 3998objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.1 NAME 'SolarisProject' SUP 'top' MUST (objectclass $ SolarisProjectID $ SolarisProjectName) MAY (memberUid $ memberGid $ description $ SolarisProjectAttr)) 3999 4000dn: cn=schema 4001changetype: modify 4002add: objectclasses 4003objectclasses: ( 1.3.6.1.4.1.11.1.3.1.2.4 NAME 'DUAConfigProfile' SUP 'top' DESC 'Abstraction of a base configuration for a DUA' MUST (cn) MAY (defaultServerList $ preferredServerList $ defaultSearchBase $ defaultSearchScope $ searchTimeLimit $ bindTimeLimit $ credentialLevel $ authenticationMethod $ followReferrals $ serviceSearchDescriptor $ serviceCredentialLevel $ serviceAuthenticationMethod $ objectclassMap $ attributeMap $ profileTTL)) 4004 4005dn: cn=schema 4006changetype: modify 4007add: objectclasses 4008objectclasses: ( 1.3.18.0.2.6.2549 NAME 'slpService' DESC 'DUMMY definition' SUP 'top' MUST (objectclass) MAY ()) 4009 4010dn: cn=schema 4011changetype: modify 4012add: objectclasses 4013objectclasses: ( 1.3.18.0.2.6.254 NAME 'slpServicePrinter' DESC 'Service Location Protocol (SLP) information.' AUXILIARY SUP 'slpService') 4014 4015dn: cn=schema 4016changetype: modify 4017add: objectclasses 4018objectclasses: ( 1.3.18.0.2.6.258 NAME 'printerAbstract' DESC 'Printer related information.' ABSTRACT SUP 'top' MAY ( printer-name $ printer-natural-language-configured $ printer-location $ printer-info $ printer-more-info $ printer-make-and-model $ printer-multiple-document-jobs-supported $ printer-charset-configured $ printer-charset-supported $ printer-generated-natural-language-supported $ printer-document-format-supported $ printer-color-supported $ printer-compression-supported $ printer-pages-per-minute $ printer-pages-per-minute-color $ printer-finishings-supported $ printer-number-up-supported $ printer-sides-supported $ printer-media-supported $ printer-media-local-supported $ printer-resolution-supported $ printer-print-quality-supported $ printer-job-priority-supported $ printer-copies-supported $ printer-job-k-octets-supported $ printer-current-operator $ printer-service-person $ printer-delivery-orientation-supported $ printer-stacking-order-supported $ printer-output-features-supported )) 4019 4020dn: cn=schema 4021changetype: modify 4022add: objectclasses 4023objectclasses: ( 1.3.18.0.2.6.255 NAME 'printerService' DESC 'Printer information.' STRUCTURAL SUP 'printerAbstract' MAY ( printer-uri $ printer-xri-supported )) 4024 4025dn: cn=schema 4026changetype: modify 4027add: objectclasses 4028objectclasses: ( 1.3.18.0.2.6.257 NAME 'printerServiceAuxClass' DESC 'Printer information.' AUXILIARY SUP 'printerAbstract' MAY ( printer-uri $ printer-xri-supported )) 4029 4030dn: cn=schema 4031changetype: modify 4032add: objectclasses 4033objectclasses: ( 1.3.18.0.2.6.256 NAME 'printerIPP' DESC 'Internet Printing Protocol (IPP) information.' AUXILIARY SUP 'top' MAY ( printer-ipp-versions-supported $ printer-multiple-document-jobs-supported )) 4034 4035dn: cn=schema 4036changetype: modify 4037add: objectclasses 4038objectclasses: ( 1.3.18.0.2.6.253 NAME 'printerLPR' DESC 'LPR information.' AUXILIARY SUP 'top' MUST ( printer-name ) MAY ( printer-aliases)) 4039 4040dn: cn=schema 4041changetype: modify 4042add: objectclasses 4043objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.14 NAME 'sunPrinter' DESC 'Sun printer information' SUP 'top' AUXILIARY MUST (objectclass $ printer-name) MAY (sun-printer-bsdaddr $ sun-printer-kvp)) 4044 4045dn: cn=schema 4046changetype: modify 4047add: objectclasses 4048objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.12 NAME 'nisplusTimeZoneData' DESC 'NIS+ timezone table data' SUP top STRUCTURAL MUST ( cn ) MAY ( nisplusTimeZone $ description ) ) 4049 4050dn: cn=schema 4051changetype: modify 4052add: objectclasses 4053objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.8 NAME 'ipTnetTemplate' DESC 'Object class for TSOL network templates' SUP 'top' MUST ( objectclass $ ipTnetTemplateName ) MAY ( SolarisAttrKeyValue ) ) 4054 4055dn: cn=schema 4056changetype: modify 4057add: objectclasses 4058objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.9 NAME 'ipTnetHost' DESC 'Associates an IP address or wildcard with a TSOL template_name' SUP 'top' AUXILIARY MUST ( objectclass $ ipTnetNumber ) ) 4059EOF 4060) > ${TMPDIR}/schema_obj 4061 4062 # Add the entry. 4063 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_obj ${VERB}" 4064 if [ $? -ne 0 ]; then 4065 ${ECHO} " ERROR: update of schema objectclass definitions failed!" 4066 cleanup 4067 exit 1 4068 fi 4069 4070 # Display message that schema is updated. 4071 ${ECHO} " ${STEP}. Schema objectclass definitions have been added." 4072 STEP=`expr $STEP + 1` 4073} 4074 4075 4076# 4077# modify_top_aci(): Modify the ACI for the top entry to disable self modify 4078# of user attributes. 4079# 4080modify_top_aci() 4081{ 4082 [ $DEBUG -eq 1 ] && ${ECHO} "In modify_top_aci()" 4083 4084 # Set ACI Name 4085 ACI_NAME="LDAP_Naming_Services_deny_write_access" 4086 4087 # Search for ACI_NAME 4088 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_top_aci 2>&1" 4089 if [ $? -ne 0 ]; then 4090 ${ECHO} "Error searching aci for ${LDAP_BASEDN}" 4091 cat ${TMPDIR}/chk_top_aci 4092 cleanup 4093 exit 1 4094 fi 4095 ${GREP} "${ACI_NAME}" ${TMPDIR}/chk_top_aci > /dev/null 2>&1 4096 if [ $? -eq 0 ]; then 4097 ${ECHO} " ${STEP}. Top level ACI ${ACI_NAME} already exists for ${LDAP_BASEDN}." 4098 STEP=`expr $STEP + 1` 4099 return 0 4100 fi 4101 4102 # Crate LDIF for top level ACI. 4103 ( cat <<EOF 4104dn: ${LDAP_BASEDN} 4105changetype: modify 4106add: aci 4107aci: (targetattr = "cn||uid||uidNumber||gidNumber||homeDirectory||shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||memberUid||SolarisAuditAlways||SolarisAuditNever||SolarisAttrKeyValue||SolarisAttrReserved1||SolarisAttrReserved2||SolarisUserQualifier")(version 3.0; acl ${ACI_NAME}; deny (write) userdn = "ldap:///self";) 4108- 4109EOF 4110) > ${TMPDIR}/top_aci 4111 4112 # Add the entry. 4113 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/top_aci ${VERB}" 4114 if [ $? -ne 0 ]; then 4115 ${ECHO} " ERROR: Modify of top level ACI failed! (restricts self modify)" 4116 cleanup 4117 exit 1 4118 fi 4119 4120 # Display message that schema is updated. 4121 ${ECHO} " ${STEP}. ACI for ${LDAP_BASEDN} modified to disable self modify." 4122 STEP=`expr $STEP + 1` 4123} 4124 4125 4126# 4127# add_vlv_aci(): Add access control information (aci) for VLV. 4128# 4129add_vlv_aci() 4130{ 4131 [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_aci()" 4132 4133 # Add the VLV ACI. 4134 ( cat <<EOF 4135dn: oid=2.16.840.1.113730.3.4.9,cn=features,cn=config 4136changetype: modify 4137replace: aci 4138aci: (targetattr != "aci") (version 3.0; acl "VLV Request Control"; allow(read,search,compare) userdn = "ldap:///anyone";) 4139EOF 4140) > ${TMPDIR}/vlv_aci 4141 4142 # Add the entry. 4143 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/vlv_aci ${VERB}" 4144 if [ $? -ne 0 ]; then 4145 ${ECHO} " ERROR: Add of VLV ACI failed!" 4146 cleanup 4147 exit 1 4148 fi 4149 4150 # Display message that schema is updated. 4151 ${ECHO} " ${STEP}. Add of VLV Access Control Information (ACI)." 4152 STEP=`expr $STEP + 1` 4153} 4154 4155 4156# 4157# set_nisdomain(): Add the NisDomainObject to the Base DN. 4158# 4159set_nisdomain() 4160{ 4161 [ $DEBUG -eq 1 ] && ${ECHO} "In set_nisdomain()" 4162 4163 # Check if nisDomain is already set. 4164 ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base \ 4165 \"objectclass=*\"" > ${TMPDIR}/chk_nisdomain 2>&1 4166 ${EVAL} "${GREP} -i nisDomain ${TMPDIR}/chk_nisdomain ${VERB}" 4167 if [ $? -eq 0 ]; then 4168 ${ECHO} " ${STEP}. NisDomainObject for ${LDAP_BASEDN} was already set." 4169 STEP=`expr $STEP + 1` 4170 return 0 4171 fi 4172 4173 # Add the new top level containers. 4174 ( cat <<EOF 4175dn: ${LDAP_BASEDN} 4176changetype: modify 4177objectclass: nisDomainObject 4178nisdomain: ${LDAP_DOMAIN} 4179EOF 4180) > ${TMPDIR}/nis_domain 4181 4182 # Add the entry. 4183 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/nis_domain ${VERB}" 4184 if [ $? -ne 0 ]; then 4185 ${ECHO} " ERROR: update of NisDomainObject in ${LDAP_BASEDN} failed." 4186 cleanup 4187 exit 1 4188 fi 4189 4190 # Display message that schema is updated. 4191 ${ECHO} " ${STEP}. NisDomainObject added to ${LDAP_BASEDN}." 4192 STEP=`expr $STEP + 1` 4193} 4194 4195 4196# 4197# check_attrName(): Check that the attribute name is valid. 4198# $1 Key to check. 4199# Returns 0 : valid name 1 : invalid name 4200# 4201check_attrName() 4202{ 4203 [ $DEBUG -eq 1 ] && ${ECHO} "In check_attrName()" 4204 [ $DEBUG -eq 1 ] && ${ECHO} "check_attrName: Input Param = $1" 4205 4206 ${ECHO} $1 | ${EGREP} '^[0-9]+(\.[0-9]+)*$' > /dev/null 2>&1 4207 if [ $? -eq 0 ]; then 4208 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \ 4209 attributeTypes | ${EGREP} -i '^attributetypes[ ]*=[ ]*\([ ]*$1 ' ${VERB}" 4210 else 4211 ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \ 4212 attributeTypes | ${EGREP} -i \"'$1'\" ${VERB}" 4213 fi 4214 4215 if [ $? -ne 0 ]; then 4216 return 1 4217 else 4218 return 0 4219 fi 4220} 4221 4222 4223# 4224# get_objectclass(): Determine the objectclass for the given attribute name 4225# $1 Attribute name to check. 4226# _ATTR_NAME Return value, Object Name or NULL if unknown to idsconfig. 4227# 4228# NOTE: An attribute name can be valid but still we might not be able 4229# to determine the objectclass from the table. 4230# In such cases, the user needs to create the necessary object(s). 4231# 4232get_objectclass() 4233{ 4234 [ $DEBUG -eq 1 ] && ${ECHO} "In get_objectclass()" 4235 [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: Input Param = $1" 4236 4237 # Set return value to NULL string. 4238 _ATTR_NAME="" 4239 4240 # Test key for type: 4241 case `${ECHO} ${1} | tr '[A-Z]' '[a-z]'` in 4242 ou | organizationalunitname | 2.5.4.11) _ATTR_NAME="organizationalUnit" ;; 4243 dc | domaincomponent | 0.9.2342.19200300.100.1.25) _ATTR_NAME="domain" ;; 4244 o | organizationname | 2.5.4.10) _ATTR_NAME="organization" ;; 4245 c | countryname | 2.5.4.6) _ATTR_NAME="country" ;; 4246 *) _ATTR_NAME="" ;; 4247 esac 4248 4249 [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: _ATTR_NAME = $_ATTR_NAME" 4250} 4251 4252 4253# 4254# add_base_objects(): Add any necessary base objects. 4255# 4256add_base_objects() 4257{ 4258 [ $DEBUG -eq 1 ] && ${ECHO} "In add_base_objects()" 4259 4260 # Convert to lower case for basename. 4261 format_string "${LDAP_BASEDN}" 4262 LOWER_BASEDN="${FMT_STR}" 4263 format_string "${LDAP_SUFFIX}" 4264 LOWER_SUFFIX="${FMT_STR}" 4265 4266 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}" 4267 [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}" 4268 4269 # Create additional components. 4270 if [ "${LOWER_BASEDN}" = "${LOWER_SUFFIX}" ]; then 4271 [ $DEBUG -eq 1 ] && ${ECHO} "Base DN and Suffix equivalent" 4272 else 4273 # first, test that the suffix is valid 4274 dcstmp=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"` 4275 if [ "$dcstmp" = "${LOWER_BASEDN}" ]; then 4276 # should not happen since check_basedn_suffix() succeeded 4277 ${ECHO} "Invalid suffix ${LOWER_SUFFIX}" 4278 ${ECHO} "for Base DN ${LOWER_BASEDN}" 4279 cleanup 4280 exit 1 4281 fi 4282 # OK, suffix is valid, start working with LDAP_BASEDN 4283 # field separator is ',' (i.e., space is a valid character) 4284 dcstmp2="`${ECHO} ${LDAP_BASEDN} | 4285 sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`" 4286 dcs="" 4287 # use dcstmp to count the loop, and dcstmp2 to get the correct 4288 # string case 4289 # dcs should be in reverse order, only for these components 4290 # that need to be added 4291 while [ -n "${dcstmp}" ] 4292 do 4293 i2=`${ECHO} "$dcstmp2" | cut -f1 -d','` 4294 dk=`${ECHO} $i2 | awk -F= '{print $1}'` 4295 dc=`${ECHO} $i2 | awk -F= '{print $2}'` 4296 dcs="$dk=$dc,$dcs"; 4297 dcstmp2=`${ECHO} "$dcstmp2" | cut -f2- -d','` 4298 dcstmp=`${ECHO} "$dcstmp" | cut -f2- -d','` 4299 [ $DEBUG -eq 1 ] && \ 4300 ${ECHO} "dcs: ${dcs}\ndcstmp: ${dcstmp}\ndcstmp2: ${dcstmp2}\n" 4301 done 4302 4303 4304 4305 lastdc=${LDAP_SUFFIX} 4306 dc=`${ECHO} "${dcs}" | cut -f1 -d','` 4307 dcstmp=`${ECHO} "${dcs}" | cut -f2- -d','` 4308 while [ -n "${dc}" ]; do 4309 # Get Key and component from $dc. 4310 dk2=`${ECHO} $dc | awk -F= '{print $1}'` 4311 dc2=`${ECHO} $dc | awk -F= '{print $2}'` 4312 4313 # At this point, ${dk2} is a valid attribute name 4314 4315 # Check if entry exists first, if so, skip to next. 4316 ${LDAPSEARCH} ${SERVER_ARGS} -b "${dk2}=${dc2},$lastdc" -s base "objectclass=*" > /dev/null 2>&1 4317 if [ $? -eq 0 ]; then 4318 # Set the $lastdc to new dc. 4319 lastdc="${dk2}=${dc2},$lastdc" 4320 4321 # Process next component. 4322 dc=`${ECHO} "${dcstmp}" | cut -f1 -d','` 4323 dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','` 4324 continue 4325 4326 fi 4327 4328 # Determine the objectclass for the entry. 4329 get_objectclass $dk2 4330 OBJ_Name=${_ATTR_NAME} 4331 if [ "${OBJ_Name}" = "" ]; then 4332 ${ECHO} "Cannot determine objectclass for $dk2" 4333 ${ECHO} "Please create ${dk2}=${dc2},$lastdc entry and rerun idsconfig" 4334 exit 1 4335 fi 4336 4337 # Add the new container. 4338 ( cat <<EOF 4339dn: ${dk2}=${dc2},$lastdc 4340${dk2}: $dc2 4341objectClass: top 4342objectClass: ${OBJ_Name} 4343EOF 4344) > ${TMPDIR}/base_objects 4345 4346 4347 # Set the $lastdc to new dc. 4348 lastdc="${dk2}=${dc2},$lastdc" 4349 4350 # Add the entry. 4351 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/base_objects ${VERB}" 4352 if [ $? -ne 0 ]; then 4353 ${ECHO} " ERROR: update of base objects ${dc} failed." 4354 cleanup 4355 exit 1 4356 fi 4357 4358 # Display message that schema is updated. 4359 ${ECHO} " ${STEP}. Created DN component ${dc}." 4360 STEP=`expr $STEP + 1` 4361 4362 # Process next component. 4363 dc=`${ECHO} "${dcstmp}" | cut -f1 -d','` 4364 dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','` 4365 done 4366 fi 4367} 4368 4369 4370# 4371# add_new_containers(): Add the top level classes. 4372# 4373# $1 = Base DN 4374# 4375add_new_containers() 4376{ 4377 [ $DEBUG -eq 1 ] && ${ECHO} "In add_new_containers()" 4378 4379 for ou in people group rpc protocols networks netgroup \ 4380 aliases hosts services ethers profile printers projects \ 4381 SolarisAuthAttr SolarisProfAttr Timezone ipTnet ; do 4382 4383 # Check if nismaps already exist. 4384 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=${ou},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" 4385 if [ $? -eq 0 ]; then 4386 continue 4387 fi 4388 4389 # Create TMP file to add. 4390 ( cat <<EOF 4391dn: ou=${ou},${LDAP_BASEDN} 4392ou: ${ou} 4393objectClass: top 4394objectClass: organizationalUnit 4395EOF 4396) > ${TMPDIR}/toplevel.${ou} 4397 4398 # Add the entry. 4399 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/toplevel.${ou} ${VERB}" 4400 if [ $? -ne 0 ]; then 4401 ${ECHO} " ERROR: Add of ou=${ou} container failed!" 4402 cleanup 4403 exit 1 4404 fi 4405 done 4406 4407 # Display message that top level OU containers complete. 4408 ${ECHO} " ${STEP}. Top level \"ou\" containers complete." 4409 STEP=`expr $STEP + 1` 4410} 4411 4412 4413# 4414# add_auto_maps(): Add the automount map entries. 4415# 4416# auto_home, auto_direct, auto_master, auto_shared 4417# 4418add_auto_maps() 4419{ 4420 [ $DEBUG -eq 1 ] && ${ECHO} "In add_auto_maps()" 4421 4422 # Set AUTO_MAPS for maps to create. 4423 AUTO_MAPS="auto_home auto_direct auto_master auto_shared" 4424 4425 for automap in $AUTO_MAPS; do 4426 # Check if automaps already exist. 4427 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"automountMapName=${automap},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" 4428 if [ $? -eq 0 ]; then 4429 continue 4430 fi 4431 4432 # Create the tmp file to add. 4433 ( cat <<EOF 4434dn: automountMapName=${automap},${LDAP_BASEDN} 4435automountMapName: ${automap} 4436objectClass: top 4437objectClass: automountMap 4438EOF 4439) > ${TMPDIR}/automap.${automap} 4440 4441 # Add the entry. 4442 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/automap.${automap} ${VERB}" 4443 if [ $? -ne 0 ]; then 4444 ${ECHO} " ERROR: Add of automap ${automap} failed!" 4445 cleanup 4446 exit 1 4447 fi 4448 done 4449 4450 # Display message that automount entries are updated. 4451 ${ECHO} " ${STEP}. automount maps: $AUTO_MAPS processed." 4452 STEP=`expr $STEP + 1` 4453} 4454 4455 4456# 4457# add_proxyagent(): Add entry for nameservice to use to access server. 4458# 4459add_proxyagent() 4460{ 4461 [ $DEBUG -eq 1 ] && ${ECHO} "In add_proxyagent()" 4462 4463 # Check if nismaps already exist. 4464 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_PROXYAGENT}\" -s base \"objectclass=*\" ${VERB}" 4465 if [ $? -eq 0 ]; then 4466 ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} already exists." 4467 STEP=`expr $STEP + 1` 4468 return 0 4469 fi 4470 4471 # Get cn and sn names from LDAP_PROXYAGENT. 4472 cn_tmp=`${ECHO} ${LDAP_PROXYAGENT} | cut -f1 -d, | cut -f2 -d=` 4473 4474 # Create the tmp file to add. 4475 ( cat <<EOF 4476dn: ${LDAP_PROXYAGENT} 4477cn: ${cn_tmp} 4478sn: ${cn_tmp} 4479objectclass: top 4480objectclass: person 4481userpassword: ${LDAP_PROXYAGENT_CRED} 4482EOF 4483) > ${TMPDIR}/proxyagent 4484 4485 # Add the entry. 4486 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/proxyagent ${VERB}" 4487 if [ $? -ne 0 ]; then 4488 ${ECHO} " ERROR: Adding proxyagent failed!" 4489 cleanup 4490 exit 1 4491 fi 4492 4493 # Display message that schema is updated. 4494 ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} added." 4495 STEP=`expr $STEP + 1` 4496} 4497 4498 4499# 4500# allow_proxy_read_pw(): Give Proxy Agent read permission for password. 4501# 4502allow_proxy_read_pw() 4503{ 4504 [ $DEBUG -eq 1 ] && ${ECHO} "In allow_proxy_read_pw()" 4505 4506 # Set ACI Name 4507 PROXY_ACI_NAME="LDAP_Naming_Services_proxy_password_read" 4508 4509 # Search for ACI_NAME 4510 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1" 4511 ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci > /dev/null 2>&1 4512 if [ $? -eq 0 ]; then 4513 ${ECHO} " ${STEP}. Proxy ACI ${PROXY_ACI_NAME=} already exists for ${LDAP_BASEDN}." 4514 STEP=`expr $STEP + 1` 4515 return 0 4516 fi 4517 4518 # Create the tmp file to add. 4519 ( cat <<EOF 4520dn: ${LDAP_BASEDN} 4521changetype: modify 4522add: aci 4523aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="userPassword")(version 3.0; acl ${PROXY_ACI_NAME}; allow (compare,read,search) userdn = "ldap:///${LDAP_PROXYAGENT}";) 4524EOF 4525) > ${TMPDIR}/proxy_read 4526 4527 # Add the entry. 4528 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_read ${VERB}" 4529 if [ $? -ne 0 ]; then 4530 ${ECHO} " ERROR: Allow ${LDAP_PROXYAGENT} to read password failed!" 4531 cleanup 4532 exit 1 4533 fi 4534 4535 # Display message that schema is updated. 4536 ${ECHO} " ${STEP}. Give ${LDAP_PROXYAGENT} read permission for password." 4537 STEP=`expr $STEP + 1` 4538} 4539 4540 4541# 4542# add_profile(): Add client profile to server. 4543# 4544add_profile() 4545{ 4546 [ $DEBUG -eq 1 ] && ${ECHO} "In add_profile()" 4547 4548 # If profile name already exists, DELETE it, and add new one. 4549 eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" 4550 if [ $? -eq 0 ]; then 4551 # Create Delete file. 4552 ( cat <<EOF 4553cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN} 4554EOF 4555) > ${TMPDIR}/del_profile 4556 4557 # Check if DEL_OLD_PROFILE is set. (If not ERROR) 4558 if [ $DEL_OLD_PROFILE -eq 0 ]; then 4559 ${ECHO} "ERROR: Profile name ${LDAP_PROFILE_NAME} exists! Add failed!" 4560 exit 1 4561 fi 4562 4563 # Delete the OLD profile. 4564 ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} -f ${TMPDIR}/del_profile ${VERB}" 4565 if [ $? -ne 0 ]; then 4566 ${ECHO} " ERROR: Attempt to DELETE profile failed!" 4567 cleanup 4568 exit 1 4569 fi 4570 fi 4571 4572 # Build the "ldapclient genprofile" command string to execute. 4573 GEN_CMD="ldapclient genprofile -a \"profileName=${LDAP_PROFILE_NAME}\"" 4574 4575 # Add required argument defaultSearchBase. 4576 GEN_CMD="${GEN_CMD} -a \"defaultSearchBase=${LDAP_BASEDN}\"" 4577 4578 # Add optional parameters. 4579 [ -n "$LDAP_SERVER_LIST" ] && \ 4580 GEN_CMD="${GEN_CMD} -a \"defaultServerList=${LDAP_SERVER_LIST}\"" 4581 [ -n "$LDAP_SEARCH_SCOPE" ] && \ 4582 GEN_CMD="${GEN_CMD} -a \"defaultSearchScope=${LDAP_SEARCH_SCOPE}\"" 4583 [ -n "$LDAP_CRED_LEVEL" ] && \ 4584 GEN_CMD="${GEN_CMD} -a \"credentialLevel=${LDAP_CRED_LEVEL}\"" 4585 [ -n "$LDAP_AUTHMETHOD" ] && \ 4586 GEN_CMD="${GEN_CMD} -a \"authenticationMethod=${LDAP_AUTHMETHOD}\"" 4587 [ -n "$LDAP_FOLLOWREF" ] && \ 4588 GEN_CMD="${GEN_CMD} -a \"followReferrals=${LDAP_FOLLOWREF}\"" 4589 [ -n "$LDAP_SEARCH_TIME_LIMIT" ] && \ 4590 GEN_CMD="${GEN_CMD} -a \"searchTimeLimit=${LDAP_SEARCH_TIME_LIMIT}\"" 4591 [ -n "$LDAP_PROFILE_TTL" ] && \ 4592 GEN_CMD="${GEN_CMD} -a \"profileTTL=${LDAP_PROFILE_TTL}\"" 4593 [ -n "$LDAP_BIND_LIMIT" ] && \ 4594 GEN_CMD="${GEN_CMD} -a \"bindTimeLimit=${LDAP_BIND_LIMIT}\"" 4595 [ -n "$LDAP_PREF_SRVLIST" ] && \ 4596 GEN_CMD="${GEN_CMD} -a \"preferredServerList=${LDAP_PREF_SRVLIST}\"" 4597 [ -n "$LDAP_SRV_AUTHMETHOD_PAM" ] && \ 4598 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_PAM}\"" 4599 [ -n "$LDAP_SRV_AUTHMETHOD_KEY" ] && \ 4600 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_KEY}\"" 4601 [ -n "$LDAP_SRV_AUTHMETHOD_CMD" ] && \ 4602 GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_CMD}\"" 4603 4604 # Check if there are any service search descriptors to ad. 4605 if [ -s "${SSD_FILE}" ]; then 4606 ssd_2_profile 4607 fi 4608 4609 # Execute "ldapclient genprofile" to create profile. 4610 eval ${GEN_CMD} > ${TMPDIR}/gen_profile 2> ${TMPDIR}/gen_profile_ERR 4611 if [ $? -ne 0 ]; then 4612 ${ECHO} " ERROR: ldapclient genprofile failed!" 4613 cleanup 4614 exit 1 4615 fi 4616 4617 # Add the generated profile.. 4618 ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/gen_profile ${VERB}" 4619 if [ $? -ne 0 ]; then 4620 ${ECHO} " ERROR: Attempt to add profile failed!" 4621 cleanup 4622 exit 1 4623 fi 4624 4625 # Display message that schema is updated. 4626 ${ECHO} " ${STEP}. Generated client profile and loaded on server." 4627 STEP=`expr $STEP + 1` 4628} 4629 4630 4631# 4632# cleanup(): Remove the TMPDIR and all files in it. 4633# 4634cleanup() 4635{ 4636 [ $DEBUG -eq 1 ] && ${ECHO} "In cleanup()" 4637 4638 rm -fr ${TMPDIR} 4639} 4640 4641 4642# 4643# * * * MAIN * * * 4644# 4645# Description: 4646# This script assumes that the iPlanet Directory Server (iDS) is 4647# installed and that setup has been run. This script takes the 4648# iDS server from that point and sets up the infrastructure for 4649# LDAP Naming Services. After running this script, ldapaddent(1M) 4650# or some other tools can be used to populate data. 4651 4652# Initialize the variables that need to be set to NULL, or some 4653# other initial value before the rest of the functions can be called. 4654init 4655 4656# Parse command line arguments. 4657parse_arg $* 4658shift $? 4659 4660# Print extra line to separate from prompt. 4661${ECHO} " " 4662 4663# Either Load the user specified config file 4664# or prompt user for config info. 4665if [ -n "$INPUT_FILE" ] 4666then 4667 load_config_file 4668 INTERACTIVE=0 # Turns off prompts that occur later. 4669 validate_info # Validate basic info in file. 4670 chk_ids_version # Check iDS version for compatibility. 4671 gssapi_setup_auto 4672else 4673 # Display BACKUP warning to user. 4674 display_msg backup_server 4675 get_confirm "Do you wish to continue with server setup (y/n/h)?" "n" "backup_help" 4676 if [ $? -eq 0 ]; then # if No, cleanup and exit. 4677 cleanup ; exit 1 4678 fi 4679 4680 # Prompt for values. 4681 prompt_config_info 4682 display_summary # Allow user to modify results. 4683 INTERACTIVE=1 # Insures future prompting. 4684fi 4685 4686# Modify slapd.oc.conf to ALLOW cn instead of REQUIRE. 4687modify_cn 4688 4689# Modify timelimit to user value. 4690[ $NEED_TIME -eq 1 ] && modify_timelimit 4691 4692# Modify sizelimit to user value. 4693[ $NEED_SIZE -eq 1 ] && modify_sizelimit 4694 4695# Modify the password storage scheme to support CRYPT. 4696if [ "$NEED_CRYPT" = "TRUE" ]; then 4697 modify_pwd_crypt 4698fi 4699 4700# Update the schema (Attributes, Objectclass Definitions) 4701if [ ${SCHEMA_UPDATED} -eq 0 ]; then 4702 update_schema_attr 4703 update_schema_obj 4704fi 4705 4706# Add suffix together with its root entry (if needed) 4707add_suffix || 4708{ 4709 cleanup 4710 exit 1 4711} 4712 4713# Add base objects (if needed) 4714add_base_objects 4715 4716# Update the NisDomainObject. 4717# The Base DN might of just been created, so this MUST happen after 4718# the base objects have been added! 4719set_nisdomain 4720 4721# Add top level classes (new containers) 4722add_new_containers 4723 4724# Add common nismaps. 4725add_auto_maps 4726 4727# Modify top ACI. 4728modify_top_aci 4729 4730# Add Access Control Information for VLV. 4731add_vlv_aci 4732 4733# if Proxy needed, Add Proxy Agent and give read permission for password. 4734if [ $NEED_PROXY -eq 1 ]; then 4735 add_proxyagent 4736 allow_proxy_read_pw 4737fi 4738 4739# Generate client profile and add it to the server. 4740add_profile 4741 4742# Add Indexes to improve Search Performance. 4743add_eq_indexes 4744add_sub_indexes 4745add_vlv_indexes 4746 4747# Display setup complete message 4748display_msg setup_complete 4749 4750# Display VLV index commands to be executed on server. 4751display_vlv_cmds 4752 4753# Create config file if requested. 4754[ -n "$OUTPUT_FILE" ] && create_config_file 4755 4756# Removed the TMPDIR and all files in it. 4757cleanup 4758 4759exit 0 4760# end of MAIN. 4761