xref: /titanic_44/usr/src/uts/sun4u/os/mach_startup.c (revision 749f21d359d8fbd020c974a1a5227316221bfc9c)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #include <sys/machsystm.h>
30 #include <sys/archsystm.h>
31 #include <sys/vm.h>
32 #include <sys/cpu.h>
33 #include <sys/atomic.h>
34 #include <sys/reboot.h>
35 #include <sys/kdi.h>
36 #include <sys/bootconf.h>
37 #include <sys/memlist_plat.h>
38 #include <sys/memlist_impl.h>
39 #include <sys/prom_plat.h>
40 #include <sys/prom_isa.h>
41 #include <sys/autoconf.h>
42 #include <sys/intreg.h>
43 #include <sys/ivintr.h>
44 #include <sys/fpu/fpusystm.h>
45 #include <sys/iommutsb.h>
46 #include <vm/vm_dep.h>
47 #include <vm/seg_kmem.h>
48 #include <vm/seg_kpm.h>
49 #include <vm/seg_map.h>
50 #include <vm/seg_kp.h>
51 #include <sys/sysconf.h>
52 #include <vm/hat_sfmmu.h>
53 #include <sys/kobj.h>
54 #include <sys/sun4asi.h>
55 #include <sys/clconf.h>
56 #include <sys/platform_module.h>
57 #include <sys/panic.h>
58 #include <sys/cpu_sgnblk_defs.h>
59 #include <sys/clock.h>
60 #include <sys/fpras_impl.h>
61 #include <sys/prom_debug.h>
62 #include <sys/traptrace.h>
63 #include <sys/memnode.h>
64 #include <sys/mem_cage.h>
65 
66 /*
67  * fpRAS implementation structures.
68  */
69 struct fpras_chkfn *fpras_chkfnaddrs[FPRAS_NCOPYOPS];
70 struct fpras_chkfngrp *fpras_chkfngrps;
71 struct fpras_chkfngrp *fpras_chkfngrps_base;
72 int fpras_frequency = -1;
73 int64_t fpras_interval = -1;
74 
75 void
76 setup_trap_table(void)
77 {
78 	intr_init(CPU);			/* init interrupt request free list */
79 	setwstate(WSTATE_KERN);
80 	prom_set_traptable(&trap_table);
81 }
82 
83 void
84 mach_fpras()
85 {
86 	if (fpras_implemented && !fpras_disable) {
87 		int i;
88 		struct fpras_chkfngrp *fcgp;
89 		size_t chkfngrpsallocsz;
90 
91 		/*
92 		 * Note that we size off of NCPU and setup for
93 		 * all those possibilities regardless of whether
94 		 * the cpu id is present or not.  We do this so that
95 		 * we don't have any construction or destruction
96 		 * activity to perform at DR time, and it's not
97 		 * costly in memory.  We require block alignment.
98 		 */
99 		chkfngrpsallocsz = NCPU * sizeof (struct fpras_chkfngrp);
100 		fpras_chkfngrps_base = kmem_alloc(chkfngrpsallocsz, KM_SLEEP);
101 		if (IS_P2ALIGNED((uintptr_t)fpras_chkfngrps_base, 64)) {
102 			fpras_chkfngrps = fpras_chkfngrps_base;
103 		} else {
104 			kmem_free(fpras_chkfngrps_base, chkfngrpsallocsz);
105 			chkfngrpsallocsz += 64;
106 			fpras_chkfngrps_base = kmem_alloc(chkfngrpsallocsz,
107 			    KM_SLEEP);
108 			fpras_chkfngrps = (struct fpras_chkfngrp *)
109 			    P2ROUNDUP((uintptr_t)fpras_chkfngrps_base, 64);
110 		}
111 
112 		/*
113 		 * Copy our check function into place for each copy operation
114 		 * and each cpu id.
115 		 */
116 		fcgp = &fpras_chkfngrps[0];
117 		for (i = 0; i < FPRAS_NCOPYOPS; ++i)
118 			bcopy((void *)fpras_chkfn_type1, &fcgp->fpras_fn[i],
119 			    sizeof (struct fpras_chkfn));
120 		for (i = 1; i < NCPU; ++i)
121 			*(&fpras_chkfngrps[i]) = *fcgp;
122 
123 		/*
124 		 * At definition fpras_frequency is set to -1, and it will
125 		 * still have that value unless changed in /etc/system (not
126 		 * strictly supported, but not preventable).  The following
127 		 * both sets the default and sanity checks anything from
128 		 * /etc/system.
129 		 */
130 		if (fpras_frequency < 0)
131 			fpras_frequency = FPRAS_DEFAULT_FREQUENCY;
132 
133 		/*
134 		 * Now calculate fpras_interval.  When fpras_interval
135 		 * becomes non-negative fpras checks will commence
136 		 * (copies before this point in boot will bypass fpras).
137 		 * Our stores of instructions must be visible; no need
138 		 * to flush as they're never been executed before.
139 		 */
140 		membar_producer();
141 		fpras_interval = (fpras_frequency == 0) ?
142 		    0 : sys_tick_freq / fpras_frequency;
143 	}
144 }
145 
146 void
147 mach_hw_copy_limit(void)
148 {
149 	if (!fpu_exists) {
150 		use_hw_bcopy = 0;
151 		hw_copy_limit_1 = 0;
152 		hw_copy_limit_2 = 0;
153 		hw_copy_limit_4 = 0;
154 		hw_copy_limit_8 = 0;
155 		use_hw_bzero = 0;
156 	}
157 }
158 
159 void
160 load_tod_module()
161 {
162 	/*
163 	 * Load tod driver module for the tod part found on this system.
164 	 * Recompute the cpu frequency/delays based on tod as tod part
165 	 * tends to keep time more accurately.
166 	 */
167 	if (tod_module_name == NULL || modload("tod", tod_module_name) == -1)
168 		halt("Can't load tod module");
169 }
170 
171 void
172 mach_memscrub(void)
173 {
174 	/*
175 	 * Startup memory scrubber, if not running fpu emulation code.
176 	 */
177 
178 	if (fpu_exists) {
179 		if (memscrub_init()) {
180 			cmn_err(CE_WARN,
181 			    "Memory scrubber failed to initialize");
182 		}
183 	}
184 }
185 
186 void
187 mach_cpu_halt_idle()
188 {
189 	/* no suport for halting idle CPU */
190 }
191 
192 /*ARGSUSED*/
193 void
194 cpu_intrq_setup(struct cpu *cp)
195 {
196 	/* Interrupt mondo queues not applicable to sun4u */
197 }
198 
199 /*ARGSUSED*/
200 void
201 cpu_intrq_register(struct cpu *cp)
202 {
203 	/* Interrupt/error queues not applicable to sun4u */
204 }
205 
206 /*ARGSUSED*/
207 void
208 mach_htraptrace_setup(int cpuid)
209 {
210 	/* Setup hypervisor traptrace buffer, not applicable to sun4u */
211 }
212 
213 /*ARGSUSED*/
214 void
215 mach_htraptrace_configure(int cpuid)
216 {
217 	/* enable/ disable hypervisor traptracing, not applicable to sun4u */
218 }
219 
220 /*ARGSUSED*/
221 void
222 mach_htraptrace_init(void)
223 {
224 	/* allocate hypervisor traptrace buffer, not applicable to sun4u */
225 }
226 
227 /*ARGSUSED*/
228 void
229 mach_htraptrace_cleanup(int cpuid)
230 {
231 	/* cleanup hypervisor traptrace buffer, not applicable to sun4u */
232 }
233 
234 void
235 mach_descrip_init(void)
236 {
237 	/* Obtain Machine description - only for sun4v */
238 }
239 
240 /*
241  * Return true if the machine we're running on is a Positron.
242  * (Positron is an unsupported developers platform.)
243  */
244 int
245 iam_positron(void)
246 {
247 	char model[32];
248 	const char proto_model[] = "SUNW,501-2732";
249 	pnode_t root = prom_rootnode();
250 
251 	if (prom_getproplen(root, "model") != sizeof (proto_model))
252 		return (0);
253 
254 	(void) prom_getprop(root, "model", model);
255 	if (strcmp(model, proto_model) == 0)
256 		return (1);
257 	return (0);
258 }
259 
260 /*
261  * Find a physically contiguous area of twice the largest ecache size
262  * to be used while doing displacement flush of ecaches.
263  */
264 uint64_t
265 ecache_flush_address(void)
266 {
267 	struct memlist *pmem;
268 	uint64_t flush_size;
269 	uint64_t ret_val;
270 
271 	flush_size = ecache_size * 2;
272 	for (pmem = phys_install; pmem; pmem = pmem->next) {
273 		ret_val = P2ROUNDUP(pmem->address, ecache_size);
274 		if (ret_val + flush_size <= pmem->address + pmem->size)
275 			return (ret_val);
276 	}
277 	return ((uint64_t)-1);
278 }
279 
280 /*
281  * Called with the memlist lock held to say that phys_install has
282  * changed.
283  */
284 void
285 phys_install_has_changed(void)
286 {
287 	/*
288 	 * Get the new address into a temporary just in case panicking
289 	 * involves use of ecache_flushaddr.
290 	 */
291 	uint64_t new_addr;
292 
293 	new_addr = ecache_flush_address();
294 	if (new_addr == (uint64_t)-1) {
295 		cmn_err(CE_PANIC,
296 		    "ecache_flush_address(): failed, ecache_size=%x",
297 		    ecache_size);
298 		/*NOTREACHED*/
299 	}
300 	ecache_flushaddr = new_addr;
301 	membar_producer();
302 }
303