1 /******************************************************************************
2 *
3 * Module Name: exoparg2 - AML execution - opcodes with 2 arguments
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acparser.h"
47 #include "acinterp.h"
48 #include "acevents.h"
49 #include "amlcode.h"
50
51
52 #define _COMPONENT ACPI_EXECUTER
53 ACPI_MODULE_NAME ("exoparg2")
54
55
56 /*!
57 * Naming convention for AML interpreter execution routines.
58 *
59 * The routines that begin execution of AML opcodes are named with a common
60 * convention based upon the number of arguments, the number of target operands,
61 * and whether or not a value is returned:
62 *
63 * AcpiExOpcode_xA_yT_zR
64 *
65 * Where:
66 *
67 * xA - ARGUMENTS: The number of arguments (input operands) that are
68 * required for this opcode type (1 through 6 args).
69 * yT - TARGETS: The number of targets (output operands) that are required
70 * for this opcode type (0, 1, or 2 targets).
71 * zR - RETURN VALUE: Indicates whether this opcode type returns a value
72 * as the function return (0 or 1).
73 *
74 * The AcpiExOpcode* functions are called via the Dispatcher component with
75 * fully resolved operands.
76 !*/
77
78
79 /*******************************************************************************
80 *
81 * FUNCTION: AcpiExOpcode_2A_0T_0R
82 *
83 * PARAMETERS: WalkState - Current walk state
84 *
85 * RETURN: Status
86 *
87 * DESCRIPTION: Execute opcode with two arguments, no target, and no return
88 * value.
89 *
90 * ALLOCATION: Deletes both operands
91 *
92 ******************************************************************************/
93
94 ACPI_STATUS
AcpiExOpcode_2A_0T_0R(ACPI_WALK_STATE * WalkState)95 AcpiExOpcode_2A_0T_0R (
96 ACPI_WALK_STATE *WalkState)
97 {
98 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
99 ACPI_NAMESPACE_NODE *Node;
100 UINT32 Value;
101 ACPI_STATUS Status = AE_OK;
102
103
104 ACPI_FUNCTION_TRACE_STR (ExOpcode_2A_0T_0R,
105 AcpiPsGetOpcodeName (WalkState->Opcode));
106
107
108 /* Examine the opcode */
109
110 switch (WalkState->Opcode)
111 {
112 case AML_NOTIFY_OP: /* Notify (NotifyObject, NotifyValue) */
113
114 /* The first operand is a namespace node */
115
116 Node = (ACPI_NAMESPACE_NODE *) Operand[0];
117
118 /* Second value is the notify value */
119
120 Value = (UINT32) Operand[1]->Integer.Value;
121
122 /* Are notifies allowed on this object? */
123
124 if (!AcpiEvIsNotifyObject (Node))
125 {
126 ACPI_ERROR ((AE_INFO,
127 "Unexpected notify object type [%s]",
128 AcpiUtGetTypeName (Node->Type)));
129
130 Status = AE_AML_OPERAND_TYPE;
131 break;
132 }
133
134 /*
135 * Dispatch the notify to the appropriate handler
136 * NOTE: the request is queued for execution after this method
137 * completes. The notify handlers are NOT invoked synchronously
138 * from this thread -- because handlers may in turn run other
139 * control methods.
140 */
141 Status = AcpiEvQueueNotifyRequest (Node, Value);
142 break;
143
144 default:
145
146 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
147 WalkState->Opcode));
148 Status = AE_AML_BAD_OPCODE;
149 }
150
151 return_ACPI_STATUS (Status);
152 }
153
154
155 /*******************************************************************************
156 *
157 * FUNCTION: AcpiExOpcode_2A_2T_1R
158 *
159 * PARAMETERS: WalkState - Current walk state
160 *
161 * RETURN: Status
162 *
163 * DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
164 * and one implicit return value.
165 *
166 ******************************************************************************/
167
168 ACPI_STATUS
AcpiExOpcode_2A_2T_1R(ACPI_WALK_STATE * WalkState)169 AcpiExOpcode_2A_2T_1R (
170 ACPI_WALK_STATE *WalkState)
171 {
172 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
173 ACPI_OPERAND_OBJECT *ReturnDesc1 = NULL;
174 ACPI_OPERAND_OBJECT *ReturnDesc2 = NULL;
175 ACPI_STATUS Status;
176
177
178 ACPI_FUNCTION_TRACE_STR (ExOpcode_2A_2T_1R,
179 AcpiPsGetOpcodeName (WalkState->Opcode));
180
181
182 /* Execute the opcode */
183
184 switch (WalkState->Opcode)
185 {
186 case AML_DIVIDE_OP:
187
188 /* Divide (Dividend, Divisor, RemainderResult QuotientResult) */
189
190 ReturnDesc1 = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
191 if (!ReturnDesc1)
192 {
193 Status = AE_NO_MEMORY;
194 goto Cleanup;
195 }
196
197 ReturnDesc2 = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
198 if (!ReturnDesc2)
199 {
200 Status = AE_NO_MEMORY;
201 goto Cleanup;
202 }
203
204 /* Quotient to ReturnDesc1, remainder to ReturnDesc2 */
205
206 Status = AcpiUtDivide (
207 Operand[0]->Integer.Value,
208 Operand[1]->Integer.Value,
209 &ReturnDesc1->Integer.Value,
210 &ReturnDesc2->Integer.Value);
211 if (ACPI_FAILURE (Status))
212 {
213 goto Cleanup;
214 }
215 break;
216
217 default:
218
219 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
220 WalkState->Opcode));
221
222 Status = AE_AML_BAD_OPCODE;
223 goto Cleanup;
224 }
225
226 /* Store the results to the target reference operands */
227
228 Status = AcpiExStore (ReturnDesc2, Operand[2], WalkState);
229 if (ACPI_FAILURE (Status))
230 {
231 goto Cleanup;
232 }
233
234 Status = AcpiExStore (ReturnDesc1, Operand[3], WalkState);
235 if (ACPI_FAILURE (Status))
236 {
237 goto Cleanup;
238 }
239
240 Cleanup:
241 /*
242 * Since the remainder is not returned indirectly, remove a reference to
243 * it. Only the quotient is returned indirectly.
244 */
245 AcpiUtRemoveReference (ReturnDesc2);
246
247 if (ACPI_FAILURE (Status))
248 {
249 /* Delete the return object */
250
251 AcpiUtRemoveReference (ReturnDesc1);
252 }
253
254 /* Save return object (the remainder) on success */
255
256 else
257 {
258 WalkState->ResultObj = ReturnDesc1;
259 }
260
261 return_ACPI_STATUS (Status);
262 }
263
264
265 /*******************************************************************************
266 *
267 * FUNCTION: AcpiExOpcode_2A_1T_1R
268 *
269 * PARAMETERS: WalkState - Current walk state
270 *
271 * RETURN: Status
272 *
273 * DESCRIPTION: Execute opcode with two arguments, one target, and a return
274 * value.
275 *
276 ******************************************************************************/
277
278 ACPI_STATUS
AcpiExOpcode_2A_1T_1R(ACPI_WALK_STATE * WalkState)279 AcpiExOpcode_2A_1T_1R (
280 ACPI_WALK_STATE *WalkState)
281 {
282 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
283 ACPI_OPERAND_OBJECT *ReturnDesc = NULL;
284 UINT64 Index;
285 ACPI_STATUS Status = AE_OK;
286 ACPI_SIZE Length = 0;
287
288
289 ACPI_FUNCTION_TRACE_STR (ExOpcode_2A_1T_1R,
290 AcpiPsGetOpcodeName (WalkState->Opcode));
291
292
293 /* Execute the opcode */
294
295 if (WalkState->OpInfo->Flags & AML_MATH)
296 {
297 /* All simple math opcodes (add, etc.) */
298
299 ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
300 if (!ReturnDesc)
301 {
302 Status = AE_NO_MEMORY;
303 goto Cleanup;
304 }
305
306 ReturnDesc->Integer.Value = AcpiExDoMathOp (
307 WalkState->Opcode,
308 Operand[0]->Integer.Value,
309 Operand[1]->Integer.Value);
310 goto StoreResultToTarget;
311 }
312
313 switch (WalkState->Opcode)
314 {
315 case AML_MOD_OP: /* Mod (Dividend, Divisor, RemainderResult (ACPI 2.0) */
316
317 ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
318 if (!ReturnDesc)
319 {
320 Status = AE_NO_MEMORY;
321 goto Cleanup;
322 }
323
324 /* ReturnDesc will contain the remainder */
325
326 Status = AcpiUtDivide (
327 Operand[0]->Integer.Value,
328 Operand[1]->Integer.Value,
329 NULL,
330 &ReturnDesc->Integer.Value);
331 break;
332
333 case AML_CONCAT_OP: /* Concatenate (Data1, Data2, Result) */
334
335 Status = AcpiExDoConcatenate (
336 Operand[0], Operand[1], &ReturnDesc, WalkState);
337 break;
338
339 case AML_TO_STRING_OP: /* ToString (Buffer, Length, Result) (ACPI 2.0) */
340 /*
341 * Input object is guaranteed to be a buffer at this point (it may have
342 * been converted.) Copy the raw buffer data to a new object of
343 * type String.
344 */
345
346 /*
347 * Get the length of the new string. It is the smallest of:
348 * 1) Length of the input buffer
349 * 2) Max length as specified in the ToString operator
350 * 3) Length of input buffer up to a zero byte (null terminator)
351 *
352 * NOTE: A length of zero is ok, and will create a zero-length, null
353 * terminated string.
354 */
355 while ((Length < Operand[0]->Buffer.Length) &&
356 (Length < Operand[1]->Integer.Value) &&
357 (Operand[0]->Buffer.Pointer[Length]))
358 {
359 Length++;
360 }
361
362 /* Allocate a new string object */
363
364 ReturnDesc = AcpiUtCreateStringObject (Length);
365 if (!ReturnDesc)
366 {
367 Status = AE_NO_MEMORY;
368 goto Cleanup;
369 }
370
371 /*
372 * Copy the raw buffer data with no transform.
373 * (NULL terminated already)
374 */
375 memcpy (ReturnDesc->String.Pointer,
376 Operand[0]->Buffer.Pointer, Length);
377 break;
378
379 case AML_CONCAT_RES_OP:
380
381 /* ConcatenateResTemplate (Buffer, Buffer, Result) (ACPI 2.0) */
382
383 Status = AcpiExConcatTemplate (
384 Operand[0], Operand[1], &ReturnDesc, WalkState);
385 break;
386
387 case AML_INDEX_OP: /* Index (Source Index Result) */
388
389 /* Create the internal return object */
390
391 ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_REFERENCE);
392 if (!ReturnDesc)
393 {
394 Status = AE_NO_MEMORY;
395 goto Cleanup;
396 }
397
398 /* Initialize the Index reference object */
399
400 Index = Operand[1]->Integer.Value;
401 ReturnDesc->Reference.Value = (UINT32) Index;
402 ReturnDesc->Reference.Class = ACPI_REFCLASS_INDEX;
403
404 /*
405 * At this point, the Source operand is a String, Buffer, or Package.
406 * Verify that the index is within range.
407 */
408 switch ((Operand[0])->Common.Type)
409 {
410 case ACPI_TYPE_STRING:
411
412 if (Index >= Operand[0]->String.Length)
413 {
414 Length = Operand[0]->String.Length;
415 Status = AE_AML_STRING_LIMIT;
416 }
417
418 ReturnDesc->Reference.TargetType = ACPI_TYPE_BUFFER_FIELD;
419 ReturnDesc->Reference.IndexPointer =
420 &(Operand[0]->Buffer.Pointer [Index]);
421 break;
422
423 case ACPI_TYPE_BUFFER:
424
425 if (Index >= Operand[0]->Buffer.Length)
426 {
427 Length = Operand[0]->Buffer.Length;
428 Status = AE_AML_BUFFER_LIMIT;
429 }
430
431 ReturnDesc->Reference.TargetType = ACPI_TYPE_BUFFER_FIELD;
432 ReturnDesc->Reference.IndexPointer =
433 &(Operand[0]->Buffer.Pointer [Index]);
434 break;
435
436 case ACPI_TYPE_PACKAGE:
437
438 if (Index >= Operand[0]->Package.Count)
439 {
440 Length = Operand[0]->Package.Count;
441 Status = AE_AML_PACKAGE_LIMIT;
442 }
443
444 ReturnDesc->Reference.TargetType = ACPI_TYPE_PACKAGE;
445 ReturnDesc->Reference.Where =
446 &Operand[0]->Package.Elements [Index];
447 break;
448
449 default:
450
451 Status = AE_AML_INTERNAL;
452 goto Cleanup;
453 }
454
455 /* Failure means that the Index was beyond the end of the object */
456
457 if (ACPI_FAILURE (Status))
458 {
459 ACPI_EXCEPTION ((AE_INFO, Status,
460 "Index (0x%X%8.8X) is beyond end of object (length 0x%X)",
461 ACPI_FORMAT_UINT64 (Index), (UINT32) Length));
462 goto Cleanup;
463 }
464
465 /*
466 * Save the target object and add a reference to it for the life
467 * of the index
468 */
469 ReturnDesc->Reference.Object = Operand[0];
470 AcpiUtAddReference (Operand[0]);
471
472 /* Store the reference to the Target */
473
474 Status = AcpiExStore (ReturnDesc, Operand[2], WalkState);
475
476 /* Return the reference */
477
478 WalkState->ResultObj = ReturnDesc;
479 goto Cleanup;
480
481 default:
482
483 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
484 WalkState->Opcode));
485 Status = AE_AML_BAD_OPCODE;
486 break;
487 }
488
489
490 StoreResultToTarget:
491
492 if (ACPI_SUCCESS (Status))
493 {
494 /*
495 * Store the result of the operation (which is now in ReturnDesc) into
496 * the Target descriptor.
497 */
498 Status = AcpiExStore (ReturnDesc, Operand[2], WalkState);
499 if (ACPI_FAILURE (Status))
500 {
501 goto Cleanup;
502 }
503
504 if (!WalkState->ResultObj)
505 {
506 WalkState->ResultObj = ReturnDesc;
507 }
508 }
509
510
511 Cleanup:
512
513 /* Delete return object on error */
514
515 if (ACPI_FAILURE (Status))
516 {
517 AcpiUtRemoveReference (ReturnDesc);
518 WalkState->ResultObj = NULL;
519 }
520
521 return_ACPI_STATUS (Status);
522 }
523
524
525 /*******************************************************************************
526 *
527 * FUNCTION: AcpiExOpcode_2A_0T_1R
528 *
529 * PARAMETERS: WalkState - Current walk state
530 *
531 * RETURN: Status
532 *
533 * DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
534 *
535 ******************************************************************************/
536
537 ACPI_STATUS
AcpiExOpcode_2A_0T_1R(ACPI_WALK_STATE * WalkState)538 AcpiExOpcode_2A_0T_1R (
539 ACPI_WALK_STATE *WalkState)
540 {
541 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
542 ACPI_OPERAND_OBJECT *ReturnDesc = NULL;
543 ACPI_STATUS Status = AE_OK;
544 BOOLEAN LogicalResult = FALSE;
545
546
547 ACPI_FUNCTION_TRACE_STR (ExOpcode_2A_0T_1R,
548 AcpiPsGetOpcodeName (WalkState->Opcode));
549
550
551 /* Create the internal return object */
552
553 ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
554 if (!ReturnDesc)
555 {
556 Status = AE_NO_MEMORY;
557 goto Cleanup;
558 }
559
560 /* Execute the Opcode */
561
562 if (WalkState->OpInfo->Flags & AML_LOGICAL_NUMERIC)
563 {
564 /* LogicalOp (Operand0, Operand1) */
565
566 Status = AcpiExDoLogicalNumericOp (WalkState->Opcode,
567 Operand[0]->Integer.Value, Operand[1]->Integer.Value,
568 &LogicalResult);
569 goto StoreLogicalResult;
570 }
571 else if (WalkState->OpInfo->Flags & AML_LOGICAL)
572 {
573 /* LogicalOp (Operand0, Operand1) */
574
575 Status = AcpiExDoLogicalOp (WalkState->Opcode, Operand[0],
576 Operand[1], &LogicalResult);
577 goto StoreLogicalResult;
578 }
579
580 switch (WalkState->Opcode)
581 {
582 case AML_ACQUIRE_OP: /* Acquire (MutexObject, Timeout) */
583
584 Status = AcpiExAcquireMutex (Operand[1], Operand[0], WalkState);
585 if (Status == AE_TIME)
586 {
587 LogicalResult = TRUE; /* TRUE = Acquire timed out */
588 Status = AE_OK;
589 }
590 break;
591
592
593 case AML_WAIT_OP: /* Wait (EventObject, Timeout) */
594
595 Status = AcpiExSystemWaitEvent (Operand[1], Operand[0]);
596 if (Status == AE_TIME)
597 {
598 LogicalResult = TRUE; /* TRUE, Wait timed out */
599 Status = AE_OK;
600 }
601 break;
602
603 default:
604
605 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
606 WalkState->Opcode));
607
608 Status = AE_AML_BAD_OPCODE;
609 goto Cleanup;
610 }
611
612
613 StoreLogicalResult:
614 /*
615 * Set return value to according to LogicalResult. logical TRUE (all ones)
616 * Default is FALSE (zero)
617 */
618 if (LogicalResult)
619 {
620 ReturnDesc->Integer.Value = ACPI_UINT64_MAX;
621 }
622
623 Cleanup:
624
625 /* Delete return object on error */
626
627 if (ACPI_FAILURE (Status))
628 {
629 AcpiUtRemoveReference (ReturnDesc);
630 }
631
632 /* Save return object on success */
633
634 else
635 {
636 WalkState->ResultObj = ReturnDesc;
637 }
638
639 return_ACPI_STATUS (Status);
640 }
641