xref: /titanic_44/usr/src/uts/common/io/ppm/ppm_subr.c (revision fbcec90110655a00a2d5c9bdfaf87c7b476a4902)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 /*
29  * ppm driver subroutines
30  */
31 
32 #include <sys/open.h>
33 #include <sys/file.h>
34 #include <sys/conf.h>
35 #include <sys/epm.h>
36 #include <sys/sunldi.h>
37 #include <sys/ppmvar.h>
38 #include <sys/ppmio.h>
39 #include <sys/promif.h>
40 #include <sys/ddi_impldefs.h>
41 #include <sys/ddi.h>
42 #include <sys/sunddi.h>
43 /*
44  * Append address to the device path, if it is set.  Routine
45  * ddi_pathname does not look for device address if the node is in
46  * DS_INITIALIZED state.
47  */
48 #define	PPM_GET_PATHNAME(dip, path)				\
49 	(void) ddi_pathname((dip), (path));			\
50 	if ((i_ddi_node_state((dip)) < DS_INITIALIZED) &&	\
51 	    (ddi_get_name_addr((dip)) != NULL)) {		\
52 		(void) strcat((path), "@");			\
53 		(void) strcat((path), ddi_get_name_addr((dip)));\
54 	}
55 
56 int	ppm_parse_dc(char **, ppm_dc_t *);
57 int	ppm_match_devs(char *, ppm_db_t *);
58 ppm_db_t *ppm_parse_pattern(struct ppm_db **, char *);
59 int	ppm_count_char(char *, char);
60 int	ppm_stoi(char *, uint_t *);
61 int	ppm_convert(char *, uint_t *);
62 void	ppm_prop_free(struct ppm_cdata **);
63 
64 /*
65  * lookup string property from configuration file ppm.conf
66  */
67 static int
68 ppm_get_confdata(struct ppm_cdata **cdp, dev_info_t *dip)
69 {
70 #ifdef	DEBUG
71 	char *str = "ppm_get_confdata";
72 #endif
73 	struct ppm_cdata *cinfo;
74 	int err;
75 
76 	for (; (cinfo = *cdp) != NULL; cdp++) {
77 		err = ddi_prop_lookup_string_array(
78 		    DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
79 		    cinfo->name, &cinfo->strings, &cinfo->cnt);
80 		if (err != DDI_PROP_SUCCESS) {
81 			PPMD(D_ERROR, ("%s: no %s found, err(%d)\n",
82 			    str, cinfo->name, err))
83 			break;
84 		}
85 	}
86 	return (err);
87 }
88 
89 void
90 ppm_prop_free(struct ppm_cdata **cdp)
91 {
92 	if (cdp) {
93 		for (; *cdp; cdp++) {
94 			if ((*cdp)->name) {
95 				kmem_free((*cdp)->name,
96 				    strlen((*cdp)->name) + 1);
97 				(*cdp)->name = NULL;
98 			}
99 			if ((*cdp)->strings) {
100 				ddi_prop_free((*cdp)->strings);
101 				(*cdp)->strings = NULL;
102 			}
103 		}
104 	}
105 }
106 
107 
108 /*
109  * free ddi prop strings. Under error condition, free ppm_db_t lists as well.
110  */
111 static int
112 ppm_attach_err(struct ppm_cdata **cdp, int err)
113 {
114 	ppm_domain_t *domp;
115 	ppm_db_t *db, *tmp;
116 
117 	ppm_prop_free(cdp);
118 	if (err != DDI_SUCCESS) {
119 		for (domp = ppm_domain_p; domp; domp = domp->next) {
120 			for (db = domp->conflist; (tmp = db) != NULL; ) {
121 				db = db->next;
122 				kmem_free(tmp->name, strlen(tmp->name) + 1);
123 				kmem_free(tmp, sizeof (*tmp));
124 			}
125 			domp->conflist = NULL;
126 		}
127 		err = DDI_FAILURE;
128 	}
129 
130 	return (err);
131 }
132 
133 
134 ppm_domain_t *
135 ppm_lookup_domain(char *dname)
136 {
137 	ppm_domain_t	*domp;
138 
139 	for (domp = ppm_domain_p; domp; domp = domp->next) {
140 		if (strcmp(dname, domp->name) == 0)
141 			break;
142 	}
143 	return (domp);
144 }
145 
146 
147 /*
148  * for the purpose of optimizing we search for identical dc->path
149  * that has been opened per previous visit here.  If search results
150  * in a hit, copy the device handle, else open the device.
151  */
152 ppm_dc_t *
153 ppm_lookup_hndl(int model, ppm_dc_t *key_dc)
154 {
155 #ifdef	DEBUG
156 	char *str = "ppm_lookup_hndl";
157 #endif
158 	char *key_path = key_dc->path;
159 	ppm_domain_t *domp;
160 	ppm_dc_t *dc;
161 
162 	/* search domain by domain.model */
163 	for (domp = ppm_domain_p; domp; domp = domp->next) {
164 		if (domp->model == model)
165 			break;
166 	}
167 
168 	/* lookup hndl from same domain model */
169 	if (domp && PPM_DOMAIN_UP(domp)) {
170 		for (dc = domp->dc; dc; dc = dc->next) {
171 			if ((strcmp(dc->path, key_path) == 0) &&
172 			    (dc->lh != NULL)) {
173 				PPMD(D_PPMDC, ("%s: Hit(dc_path:%s) from SAME "
174 				    "domain %s.\n", str, key_path, domp->name))
175 				key_dc->lh = dc->lh;
176 				return (key_dc);
177 			}
178 		}
179 	}
180 
181 	/* otherwise, check other domains */
182 	for (domp = ppm_domain_p;
183 	    domp && (domp->model != model); domp = domp->next) {
184 		if (PPM_DOMAIN_UP(domp)) {
185 			for (dc = domp->dc; dc; dc = dc->next) {
186 				if ((strcmp(dc->path, key_path) == 0) &&
187 				    (dc->lh != NULL)) {
188 					PPMD(D_PPMDC, ("%s: Hit(dc_path:%s) "
189 					    "from domain %s\n",
190 					    str, key_path, domp->name))
191 					key_dc->lh = dc->lh;
192 					return (key_dc);
193 				}
194 			}
195 		}
196 	}
197 
198 	PPMD(D_PPMDC, ("%s: Miss(dc_path:%s)\n", str, key_path))
199 	return (NULL);
200 }
201 
202 
203 #define	PPM_DOMAIN_PROP			"ppm-domains"
204 #define	PPM_DEV_PROP_SUFFIX		"-devices"
205 #define	PPM_MODEL_PROP_SUFFIX		"-model"
206 #define	PPM_PROPNAME_PROP_SUFFIX	"-propname"
207 #define	PPM_CTRL_PROP_SUFFIX		"-control"
208 
209 struct ppm_domit ppm_domit_data[] = {
210 	"CPU", PPMD_CPU, PPMD_LOCK_ALL, PPMD_ON,
211 	"FET", PPMD_FET, PPMD_LOCK_ONE, PPMD_ON,
212 	"PCI", PPMD_PCI, PPMD_LOCK_ONE, PPMD_ON,
213 	"PCI_PROP", PPMD_PCI_PROP, PPMD_LOCK_ONE, PPMD_ON,
214 	"LED", PPMD_LED, 0, PPMD_ON,
215 	"PCIE", PPMD_PCIE, PPMD_LOCK_ONE, PPMD_ON,
216 	NULL
217 };
218 
219 /*
220  * store up platform dependent information provided by ppm.conf file
221  * into private data base
222  */
223 int
224 ppm_create_db(dev_info_t *dip)
225 {
226 #ifdef	DEBUG
227 	char *str = "ppm_create_db";
228 #endif
229 	ppm_domain_t *domp;
230 	ppm_db_t *db;
231 	ppm_dc_t *dc;
232 	struct ppm_cdata domdata;	/* hold "ppm-domains" property */
233 	struct ppm_cdata modeldata;	/* hold "domain_xy-model" property */
234 	struct ppm_cdata propnamedata;	/* hold "domain_xy-propname" property */
235 	struct ppm_cdata devdata;	/* hold "domain_xy-devices" property */
236 	struct ppm_cdata dcdata;	/* hold "domain_xy-control" property */
237 	struct ppm_cdata *cdata[2];
238 	char **dom_namep, **model_namep, **dev_namep, **dc_namep;
239 	struct ppm_domit	*domit_p;
240 	int err;
241 
242 	/*
243 	 * get "ppm-domains" property
244 	 */
245 	bzero(&domdata, sizeof (domdata));
246 	domdata.name = kmem_zalloc(strlen(PPM_DOMAIN_PROP) + 1, KM_SLEEP);
247 	(void) strcpy(domdata.name, PPM_DOMAIN_PROP);
248 	cdata[0] = &domdata;
249 	cdata[1] = NULL;
250 	if (err = ppm_get_confdata(cdata, dip)) {
251 		PPMD(D_CREATEDB, ("%s: failed to get prop \"%s\"!\n",
252 		    str, PPM_DOMAIN_PROP))
253 		return (ppm_attach_err(cdata, err));
254 	}
255 
256 	for (dom_namep = domdata.strings; *dom_namep; dom_namep++) {
257 		domp = kmem_zalloc(sizeof (*domp), KM_SLEEP);
258 		domp->name = kmem_zalloc(strlen(*dom_namep) + 1, KM_SLEEP);
259 		(void) strcpy(domp->name, *dom_namep);
260 		mutex_init(&domp->lock, NULL, MUTEX_DRIVER, NULL);
261 		if (ppm_domain_p == NULL)
262 			ppm_domain_p = domp;
263 		else {
264 			domp->next = ppm_domain_p;
265 			ppm_domain_p = domp;
266 		}
267 	}
268 	ppm_prop_free(cdata);
269 
270 	/*
271 	 * more per domain property strings in ppm.conf file tell us
272 	 * what the nature of domain, how to performe domain control, etc.
273 	 * Even the property names of those per domain properties are
274 	 * formed consisting its domain name string.
275 	 * Here we walk through our domain list, and fullfill the details.
276 	 */
277 	for (domp = ppm_domain_p; domp; domp = domp->next) {
278 		size_t	plen;
279 
280 		/*
281 		 * get "domain_xy-model" property
282 		 */
283 		bzero(&modeldata, sizeof (modeldata));
284 		plen = strlen(domp->name) + strlen(PPM_MODEL_PROP_SUFFIX) + 1;
285 		modeldata.name = kmem_zalloc(plen, KM_SLEEP);
286 		(void) sprintf(modeldata.name, "%s%s",
287 		    domp->name, PPM_MODEL_PROP_SUFFIX);
288 
289 		cdata[0] = &modeldata;
290 		cdata[1] = NULL;
291 		if (err = ppm_get_confdata(cdata, dip)) {
292 			PPMD(D_CREATEDB, ("%s: Can't read property %s!\n",
293 			    str, modeldata.name))
294 			return (ppm_attach_err(cdata, err));
295 		}
296 
297 		model_namep = modeldata.strings;
298 		for (domit_p = ppm_domit_data; domit_p->name; domit_p++) {
299 			if (strcmp(domit_p->name,  *model_namep) == 0) {
300 				domp->model = domit_p->model;
301 				domp->dflags = domit_p->dflags;
302 				domp->status = domit_p->status;
303 				break;
304 			}
305 		}
306 		ASSERT(domit_p);
307 
308 		ppm_prop_free(cdata);
309 
310 
311 		/* get "domain_xy-propname" property */
312 		bzero(&propnamedata, sizeof (propnamedata));
313 		plen = strlen(domp->name) +
314 		    strlen(PPM_PROPNAME_PROP_SUFFIX) + 1;
315 		propnamedata.name = kmem_zalloc(plen, KM_SLEEP);
316 		(void) sprintf(propnamedata.name, "%s%s",
317 		    domp->name, PPM_PROPNAME_PROP_SUFFIX);
318 
319 		cdata[0] = &propnamedata;
320 		cdata[1] = NULL;
321 		if (ppm_get_confdata(cdata, dip) == DDI_PROP_SUCCESS) {
322 			domp->propname = kmem_zalloc(
323 			    (strlen(*propnamedata.strings) + 1), KM_SLEEP);
324 			(void) strcpy(domp->propname, *propnamedata.strings);
325 			PPMD(D_CREATEDB, ("%s: %s has property name: %s\n",
326 			    str, domp->name, domp->propname))
327 		}
328 		ppm_prop_free(cdata);
329 
330 
331 		/* get "domain_xy-devices" property */
332 		bzero(&devdata, sizeof (devdata));
333 		plen = strlen(domp->name) + strlen(PPM_DEV_PROP_SUFFIX) + 1;
334 		devdata.name = kmem_zalloc(plen, KM_SLEEP);
335 		(void) sprintf(devdata.name, "%s%s",
336 		    domp->name, PPM_DEV_PROP_SUFFIX);
337 
338 		cdata[0] = &devdata;
339 		cdata[1] = NULL;
340 		if (err = ppm_get_confdata(cdata, dip)) {
341 			PPMD(D_CREATEDB, ("%s: Can't read property %s!\n",
342 			    str, devdata.name))
343 			return (ppm_attach_err(cdata, err));
344 		}
345 
346 		for (dev_namep = devdata.strings; *dev_namep; dev_namep++) {
347 			if (!ppm_parse_pattern(&db, *dev_namep))
348 				return (ppm_attach_err(cdata, err));
349 			db->next = domp->conflist;
350 			domp->conflist = db;
351 			PPMD(D_CREATEDB, ("%s: %s add pattern: %s \n",
352 			    str, devdata.name, db->name))
353 		}
354 		PPMD(D_CREATEDB, ("\n"))
355 		ppm_prop_free(cdata);
356 
357 
358 		/* get "domain_xy-control" property */
359 		bzero(&dcdata, sizeof (dcdata));
360 		plen = strlen(domp->name) + strlen(PPM_CTRL_PROP_SUFFIX) + 1;
361 		dcdata.name = kmem_zalloc(plen, KM_SLEEP);
362 		(void) sprintf(dcdata.name, "%s%s",
363 		    domp->name, PPM_CTRL_PROP_SUFFIX);
364 
365 		cdata[0] = &dcdata;
366 		cdata[1] = NULL;
367 		if (ppm_get_confdata(cdata, dip) == DDI_PROP_SUCCESS) {
368 			for (dc_namep = dcdata.strings; *dc_namep;
369 			    dc_namep++) {
370 				dc = kmem_zalloc(sizeof (*dc), KM_SLEEP);
371 				dc->next = domp->dc;
372 				domp->dc = dc;
373 				err = ppm_parse_dc(dc_namep, domp->dc);
374 				if (err != DDI_SUCCESS)
375 					return (ppm_attach_err(cdata, err));
376 			}
377 		}
378 		ppm_prop_free(cdata);
379 #ifdef	DEBUG
380 		dc = domp->dc;
381 		while (dc) {
382 			ppm_print_dc(dc);
383 			dc = dc->next;
384 		}
385 #endif
386 	}
387 
388 	return (DDI_SUCCESS);
389 }
390 
391 
392 /*
393  * scan conf devices within each domain for a matching device name
394  */
395 ppm_domain_t *
396 ppm_lookup_dev(dev_info_t *dip)
397 {
398 	char path[MAXNAMELEN];
399 	ppm_domain_t *domp;
400 	ppm_db_t *dbp;
401 
402 	PPM_GET_PATHNAME(dip, path);
403 	for (domp = ppm_domain_p; domp; domp = domp->next) {
404 		if (PPM_DOMAIN_UP(domp))
405 			for (dbp = domp->conflist; dbp; dbp = dbp->next) {
406 				if (ppm_match_devs(path, dbp) == 0)
407 					return (domp);
408 			}
409 	}
410 
411 	return (NULL);
412 }
413 
414 
415 /*
416  * check ppm.conf file domain device pathname syntax, if correct,
417  * create device match pattern.
418  * return 1 for good, -1 for bad.
419  */
420 ppm_db_t *
421 ppm_parse_pattern(struct ppm_db **dbpp, char *dev_path)
422 {
423 	char path[MAXNAMELEN];
424 	int	wccnt, i;
425 	int	wcpos[2];
426 	int	pos;
427 	char	*cp;
428 	ppm_db_t *dbp;
429 
430 	(void) strcpy(path, dev_path);
431 	if ((wccnt = ppm_count_char(path, '*')) > 2)
432 		return (NULL);
433 
434 	for (i = 0, cp = path, pos = 0; i < wccnt; i++, cp++, pos++) {
435 		for (; *cp; cp++, pos++)
436 			if (*cp == '*')
437 				break;
438 		wcpos[i] = pos;
439 		PPMD(D_CREATEDB, ("    wildcard #%d, pos %d\n",
440 		    (i + 1), wcpos[i]))
441 	}
442 
443 #ifdef	DEBUG
444 	/* first '*', if exists, don't go beyond the string */
445 	if (wccnt > 0)
446 		ASSERT(wcpos[0] < strlen(path));
447 
448 	/* second '*', if exists, better be the last character */
449 	if (wccnt == 2)
450 		ASSERT(wcpos[1] == (strlen(path) - 1));
451 #endif
452 
453 	/*
454 	 * first '*', if followed by any char, must be immediately
455 	 * followed by '@' and the rest better be bound by
456 	 * ['0-9', 'a-f', A-F'] until ended '0' or second '*''0'.
457 	 */
458 	if ((wccnt > 0) && (wcpos[0] < (strlen(path) - 1))) {
459 		cp = path + wcpos[0] + 1;
460 		if (*cp != '@')
461 			return (NULL);
462 
463 		if (!(((*(++cp) > '0') && (*cp < '9')) ||
464 		    ((*cp > 'a') && (*cp < 'f')) ||
465 		    ((*cp > 'A') && (*cp < 'F'))))
466 			return (NULL);
467 	}
468 
469 	dbp = kmem_zalloc(sizeof (struct ppm_db), KM_SLEEP);
470 	dbp->name = kmem_zalloc((strlen(path) + 1), KM_SLEEP);
471 	(void) strcpy(dbp->name, path);
472 	dbp->wccnt = wccnt;
473 	dbp->wcpos[0] = (wccnt > 0) ? wcpos[0] : -1;
474 	dbp->wcpos[1] = (wccnt == 2) ? wcpos[1] : -1;
475 
476 	return (*dbpp = dbp);
477 }
478 
479 
480 /*
481  * match given device "path" to domain device pathname
482  * pattern dbp->name that contains one or two '*' character(s).
483  * Matching policy:
484  *   1). If one wildcard terminates match pattern, need exact match
485  *       up to (but exclude) the wildcard;
486  *   2). If one wildcard does not terminate match pattern, it is to
487  *       match driver name (terminates with '@') and must be followed
488  *       by exact match of rest of pattern;
489  *   3). If two wildcards, first is to match driver name as in 2),
490  *       second is to match fcnid (terminates with '/' or '\0') and
491  *       must the last char of pattern.
492  *
493  * return  0  if match, and
494  *        non 0  if mismatch
495  */
496 int
497 ppm_match_devs(char *dev_path, ppm_db_t *dbp)
498 {
499 	char path[MAXNAMELEN];
500 	char *cp;	/* points into "path", real device pathname */
501 	char *np;	/* points into "dbp->name", the pattern */
502 	int  len;
503 
504 	if (dbp->wccnt == 0)
505 		return (strcmp(dev_path, dbp->name));
506 
507 	(void) strcpy(path, dev_path);
508 
509 	/* match upto the first '*' regardless */
510 	if (strncmp(path, dbp->name, dbp->wcpos[0]) != 0)
511 		return (-1);
512 
513 
514 	/* "<exact match>*"	*/
515 	if (dbp->name[dbp->wcpos[0] + 1] == 0) {
516 		cp = path + dbp->wcpos[0];
517 		while (*cp && (*cp++ != '/'));
518 		return ((*cp == 0) ? 0 : -1);
519 	}
520 
521 
522 	/* locate '@'	*/
523 	cp = path + dbp->wcpos[0] + 1;
524 	while (*cp && *cp != '@')
525 		cp++;
526 
527 	np = dbp->name + dbp->wcpos[0] + 1;
528 
529 	/* if one wildcard, match the rest in the pattern */
530 	if (dbp->wccnt == 1)
531 		return ((strcmp(cp, np) == 0) ? 0 : (-1));
532 
533 
534 	/* must have exact match after first wildcard up to second */
535 	ASSERT(dbp->wccnt == 2);
536 	len = dbp->wcpos[1] - dbp->wcpos[0] - 1;
537 	if (strncmp(cp, np, len) != 0)
538 		return (-1);
539 
540 	/* second wildcard match terminates with '/' or '\0' */
541 	/* but only termination with '\0' is a successful match */
542 	cp += len;
543 	while (*cp && (*cp != '/'))
544 		cp++;
545 	return ((*cp == 0) ? 0 : -1);
546 }
547 
548 
549 /*
550  * By claiming a device, ppm gets involved in its power change
551  * process: handles additional issues prior and/or post its
552  * power(9e) call.
553  *
554  * If 'dip' is a PCI device, this is the time to ask its parent
555  * what PCI bus speed it is running.
556  *
557  * returns 1 (claimed), 0 (not claimed)
558  */
559 int
560 ppm_claim_dev(dev_info_t *dip)
561 {
562 	ppm_domain_t	*domp;
563 	dev_info_t	*pdip;
564 	uint_t		pciclk;
565 	int		claimed = -1;
566 
567 	domp = ppm_lookup_dev(dip);
568 	if (!domp)
569 		claimed = 0;
570 
571 	if (domp && PPMD_IS_PCI(domp->model) &&
572 	    ! (domp->dflags & (PPMD_PCI33MHZ | PPMD_PCI66MHZ))) {
573 		pdip = ddi_get_parent(dip);
574 		ASSERT(pdip);
575 		pciclk = ddi_prop_get_int(DDI_DEV_T_ANY, pdip,
576 		    DDI_PROP_DONTPASS, "clock-frequency", -1);
577 
578 		switch (pciclk) {
579 		case 33000000:
580 			domp->dflags |= PPMD_PCI33MHZ;
581 			claimed = 1;
582 			break;
583 		case 66000000:
584 			domp->dflags |= PPMD_PCI66MHZ;
585 			claimed = 1;
586 			break;
587 		default:
588 			claimed = 0;
589 			break;
590 		}
591 	}
592 
593 	if (domp && (claimed == -1))
594 		claimed = 1;
595 
596 #ifdef DEBUG
597 	if (claimed) {
598 		char path[MAXNAMELEN];
599 		PPMD(D_CLAIMDEV, ("ppm_claim_dev: %s into domain %s\n",
600 		    ddi_pathname(dip, path), domp->name))
601 	}
602 
603 #endif
604 
605 	return (claimed);
606 }
607 
608 /*
609  * add a device to the list of domain's owned devices (if it is not already
610  * on the list).
611  */
612 ppm_owned_t *
613 ppm_add_owned(dev_info_t *dip, ppm_domain_t *domp)
614 {
615 	char path[MAXNAMELEN];
616 	ppm_owned_t *owned, *new_owned;
617 
618 	ASSERT(MUTEX_HELD(&domp->lock));
619 	PPM_GET_PATHNAME(dip, path);
620 	for (owned = domp->owned; owned; owned = owned->next)
621 		if (strcmp(path, owned->path) == 0)
622 			return (owned);
623 
624 	new_owned = kmem_zalloc(sizeof (*new_owned), KM_SLEEP);
625 	new_owned->path = kmem_zalloc(strlen(path) + 1, KM_SLEEP);
626 	(void) strcpy(new_owned->path, path);
627 	new_owned->next = domp->owned;
628 	domp->owned = new_owned;
629 
630 	return (domp->owned);
631 }
632 
633 /*
634  * create/init a new ppm device and link into the domain
635  */
636 ppm_dev_t *
637 ppm_add_dev(dev_info_t *dip, ppm_domain_t *domp)
638 {
639 	char path[MAXNAMELEN];
640 	ppm_dev_t *new = NULL;
641 	int cmpt;
642 	ppm_owned_t *owned;
643 
644 	ASSERT(MUTEX_HELD(&domp->lock));
645 	(void) ddi_pathname(dip, path);
646 	/*
647 	 * For devs which have exported "pm-components" we want to create
648 	 * a data structure for each component.  When a driver chooses not
649 	 * to export the prop we treat its device as having a single
650 	 * component and build a structure for it anyway.  All other ppm
651 	 * logic will act as if this device were always up and can thus
652 	 * make correct decisions about it in relation to other devices
653 	 * in its domain.
654 	 */
655 	for (cmpt = PM_GET_PM_INFO(dip) ? PM_NUMCMPTS(dip) : 1; cmpt--; ) {
656 		new = kmem_zalloc(sizeof (*new), KM_SLEEP);
657 		new->path = kmem_zalloc(strlen(path) + 1, KM_SLEEP);
658 		(void) strcpy(new->path, path);
659 		new->domp = domp;
660 		new->dip = dip;
661 		new->cmpt = cmpt;
662 		ppm_dev_init(new);
663 		new->next = domp->devlist;
664 		domp->devlist = new;
665 		PPMD(D_ADDDEV,
666 		    ("ppm_add_dev: %s to domain %s: ppm_dev(0x%p)\n",
667 		    new->path, domp->name, (void *)new))
668 	}
669 
670 	ASSERT(new != NULL);
671 	/*
672 	 * devi_pm_ppm_private should be set only after all
673 	 * ppm_dev s related to all components have been
674 	 * initialized and domain's pwr_cnt is incremented
675 	 * for each of them.
676 	 */
677 	PPM_SET_PRIVATE(dip, new);
678 
679 	/* remember this device forever */
680 	owned = ppm_add_owned(dip, domp);
681 
682 	/*
683 	 * Initializing flag is set for devices which have gone through
684 	 * PPM_PMR_INIT_CHILD ctlop.  By this point, these devices have
685 	 * been added to ppm structures and could participate in pm
686 	 * decision making, so clear the initializing flag.
687 	 */
688 	if (owned->initializing) {
689 		owned->initializing = 0;
690 		PPMD(D_ADDDEV, ("ppm_add_dev: cleared initializing flag "
691 		    "for %s@%s\n", PM_NAME(dip),
692 		    (PM_ADDR(dip) == NULL) ? "" : PM_ADDR(dip)))
693 	}
694 
695 	return (new);
696 }
697 
698 
699 /*
700  * returns an existing or newly created ppm device reference
701  */
702 ppm_dev_t *
703 ppm_get_dev(dev_info_t *dip, ppm_domain_t *domp)
704 {
705 	ppm_dev_t *pdp;
706 
707 	mutex_enter(&domp->lock);
708 	pdp = PPM_GET_PRIVATE(dip);
709 	if (pdp == NULL)
710 		pdp = ppm_add_dev(dip, domp);
711 	mutex_exit(&domp->lock);
712 
713 	return (pdp);
714 }
715 
716 
717 /*
718  * scan a domain's device list and remove those with .dip
719  * matching the arg *dip; we need to scan the entire list
720  * for the case of devices with multiple components
721  */
722 void
723 ppm_rem_dev(dev_info_t *dip)
724 {
725 	ppm_dev_t *pdp, **devpp;
726 	ppm_domain_t *domp;
727 
728 	pdp = PPM_GET_PRIVATE(dip);
729 	ASSERT(pdp);
730 	domp = pdp->domp;
731 	ASSERT(domp);
732 
733 	mutex_enter(&domp->lock);
734 	for (devpp = &domp->devlist; (pdp = *devpp) != NULL; ) {
735 		if (pdp->dip != dip) {
736 			devpp = &pdp->next;
737 			continue;
738 		}
739 
740 		PPMD(D_REMDEV, ("ppm_rem_dev: path \"%s\", ppm_dev 0x%p\n",
741 		    pdp->path, (void *)pdp))
742 
743 		PPM_SET_PRIVATE(dip, NULL);
744 		*devpp = pdp->next;
745 		ppm_dev_fini(pdp);
746 		kmem_free(pdp->path, strlen(pdp->path) + 1);
747 		kmem_free(pdp, sizeof (*pdp));
748 	}
749 	mutex_exit(&domp->lock);
750 }
751 
752 /*
753  * prepare kernel ioctl calls:
754  */
755 void
756 ppm_init_cb(dev_info_t *dip)
757 {
758 	char		*str = "ppm_init_cb";
759 	ppm_domain_t	*domp;
760 	ppm_dc_t	*dc;
761 
762 	for (domp = ppm_domain_p; domp != NULL; domp = domp->next) {
763 		for (dc = domp->dc; dc; dc = dc->next) {
764 			if (ppm_lookup_hndl(domp->model, dc) != NULL)
765 				continue;
766 
767 			if (ppm_init_lyr(dc, dip) != DDI_SUCCESS) {
768 				domp->dflags |= PPMD_OFFLINE;
769 				cmn_err(CE_WARN, "%s: ppm domain %s will "
770 				    "be offline.", str, domp->name);
771 				break;
772 			}
773 		}
774 	}
775 }
776 
777 
778 /*
779  *  ppm_init_lyr - initializing layered ioctl
780  * Return:
781  *     DDI_SUCCESS  - succeeded
782  *     DDI_FAILURE  - failed
783  *
784  */
785 int
786 ppm_init_lyr(ppm_dc_t	*dc, dev_info_t *dip)
787 {
788 	char 			*str = "ppm_init_lyr";
789 	int			err = 0;
790 	ldi_ident_t		li;
791 
792 	ASSERT(dc && dc->path);
793 
794 	if (err = ldi_ident_from_dip(dip, &li)) {
795 		cmn_err(CE_WARN, "%s: get ldi identifier "
796 		    "failed (err=%d)", str, err);
797 	}
798 
799 	err = ldi_open_by_name(dc->path, FWRITE|FREAD, kcred, &(dc->lh), li);
800 
801 	(void) ldi_ident_release(li);
802 
803 	if (err != 0) {
804 		cmn_err(CE_WARN, "Failed to open device(%s), rv(%d)",
805 		    dc->path, err);
806 		return (err);
807 	}
808 
809 	return (DDI_SUCCESS);
810 }
811 
812 /*
813  * lock, unlock, or trylock for one power mutex
814  */
815 void
816 ppm_lock_one(ppm_dev_t *ppmd, power_req_t *reqp, int *iresp)
817 {
818 	switch (reqp->request_type) {
819 	case PMR_PPM_LOCK_POWER:
820 		pm_lock_power_single(ppmd->dip,
821 		    reqp->req.ppm_lock_power_req.circp);
822 		break;
823 
824 	case PMR_PPM_UNLOCK_POWER:
825 		pm_unlock_power_single(ppmd->dip,
826 		    reqp->req.ppm_unlock_power_req.circ);
827 		break;
828 
829 	case PMR_PPM_TRY_LOCK_POWER:
830 		*iresp = pm_try_locking_power_single(ppmd->dip,
831 		    reqp->req.ppm_lock_power_req.circp);
832 		break;
833 	}
834 }
835 
836 
837 /*
838  * lock, unlock, or trylock for all power mutexes within a domain
839  */
840 void
841 ppm_lock_all(ppm_domain_t *domp, power_req_t *reqp, int *iresp)
842 {
843 	/*
844 	 * To simplify the implementation we let all the devices
845 	 * in the domain be represented by a single device (dip).
846 	 * We use the first device in the domain's devlist.  This
847 	 * is safe because we return with the domain lock held
848 	 * which prevents the list from changing.
849 	 */
850 	if (reqp->request_type == PMR_PPM_LOCK_POWER) {
851 		if (!MUTEX_HELD(&domp->lock))
852 			mutex_enter(&domp->lock);
853 		domp->refcnt++;
854 		ASSERT(domp->devlist != NULL);
855 		pm_lock_power_single(domp->devlist->dip,
856 		    reqp->req.ppm_lock_power_req.circp);
857 		/* domain lock remains held */
858 		return;
859 	} else if (reqp->request_type == PMR_PPM_UNLOCK_POWER) {
860 		ASSERT(MUTEX_HELD(&domp->lock));
861 		ASSERT(domp->devlist != NULL);
862 		pm_unlock_power_single(domp->devlist->dip,
863 		    reqp->req.ppm_unlock_power_req.circ);
864 		if (--domp->refcnt == 0)
865 			mutex_exit(&domp->lock);
866 		return;
867 	}
868 
869 	ASSERT(reqp->request_type == PMR_PPM_TRY_LOCK_POWER);
870 	if (!MUTEX_HELD(&domp->lock))
871 		if (!mutex_tryenter(&domp->lock)) {
872 			*iresp = 0;
873 			return;
874 		}
875 	*iresp = pm_try_locking_power_single(domp->devlist->dip,
876 	    reqp->req.ppm_lock_power_req.circp);
877 	if (*iresp)
878 		domp->refcnt++;
879 	else
880 		mutex_exit(&domp->lock);
881 }
882 
883 
884 /*
885  * return FALSE: if any detached device during its previous life exported
886  *   the "no-involuntary-power-cycles" property and detached with its
887  *   power level not at its lowest, or there is a device in the process
888  *   of being installed/attached; if a PCI domain has devices that have not
889  *   exported a property that it can tolerate clock off while bus is not
890  *   quiescent; if a 66mhz PCI domain has devices that do not support stopping
891  *   clock at D3; either one would count as a power holder.
892  * return TRUE: otherwise.
893  */
894 boolean_t
895 ppm_none_else_holds_power(ppm_domain_t *domp)
896 {
897 	ppm_dev_t  *ppmd;
898 	ppm_owned_t *owned;
899 	int	i = 0;
900 
901 	if (PPMD_IS_PCI(domp->model)) {
902 		for (ppmd = domp->devlist; ppmd; ppmd = ppmd->next) {
903 			if ((domp->model == PPMD_PCI_PROP) &&
904 			    !(ppmd->flags & PPMDEV_PCI_PROP_CLKPM))
905 				return (B_FALSE);
906 			if ((domp->dflags & PPMD_PCI66MHZ) &&
907 			    !(ppmd->flags & PPMDEV_PCI66_D2))
908 				return (B_FALSE);
909 		}
910 	}
911 
912 	for (owned = domp->owned; owned; owned = owned->next)
913 		if (pm_noinvol_detached(owned->path) || owned->initializing)
914 			i++;
915 	return (i == 0);
916 }
917 
918 
919 /*
920  * return the number of char 'c' occurrences in string s
921  */
922 int
923 ppm_count_char(char *s, char c)
924 {
925 	int	i = 0;
926 	char	*cp = s;
927 
928 	while (*cp) {
929 		if (*cp == c)
930 			i++;
931 		cp++;
932 	}
933 
934 	return (i);
935 }
936 
937 
938 /*
939  * extract and convert a substring from input string "ss" in form of
940  * "name=value" into an hex or decimal integer
941  */
942 #define	X_BASE	16
943 #define	D_BASE	10
944 int
945 ppm_stoi(char *ss, uint_t *val)
946 {
947 	char *cp;
948 	int  hex_ = 0, base = D_BASE;
949 	int  digit;
950 
951 	if ((cp = strchr(ss, '=')) == NULL)
952 		return (*val = (uint_t)-1);
953 
954 	cp++;
955 	if ((*cp == '0') && (*++cp == 'x')) {
956 		hex_++;
957 		cp++;
958 		base = X_BASE;
959 	}
960 
961 	for (digit = 0; *cp; cp++) {
962 		if (hex_ && ((*cp >= 'A') && (*cp <= 'F')))
963 			digit = (digit * base) + ((*cp - 'A') + D_BASE);
964 		else if (hex_ && ((*cp >= 'a') && (*cp <= 'f')))
965 			digit = (digit * base) + ((*cp - 'a') + D_BASE);
966 		else
967 			digit = (digit * base) + (*cp - '0');
968 	}
969 
970 	return (*val = digit);
971 }
972 
973 /*
974  * ppm_convert - convert a #define symbol to its integer value,
975  * only the #defines for ppm_dc.cmd and ppm_dc.method fields in
976  * ppmvar.h file are recognized.
977  */
978 struct ppm_confdefs {
979 	char	*sym;
980 	int	val;
981 } ppm_confdefs_table[] = {
982 	"CPU_NEXT", PPMDC_CPU_NEXT,
983 	"PRE_CHNG", PPMDC_PRE_CHNG,
984 	"CPU_GO", PPMDC_CPU_GO,
985 	"POST_CHNG", PPMDC_POST_CHNG,
986 	"FET_ON", PPMDC_FET_ON,
987 	"FET_OFF", PPMDC_FET_OFF,
988 	"CLK_OFF", PPMDC_CLK_OFF,
989 	"CLK_ON", PPMDC_CLK_ON,
990 	"LED_ON", PPMDC_LED_ON,
991 	"LED_OFF", PPMDC_LED_OFF,
992 	"KIO", PPMDC_KIO,
993 	"VCORE", PPMDC_VCORE,
994 	"I2CKIO", PPMDC_I2CKIO,
995 	"CPUSPEEDKIO", PPMDC_CPUSPEEDKIO,
996 	"PRE_PWR_OFF", PPMDC_PRE_PWR_OFF,
997 	"PRE_PWR_ON", PPMDC_PRE_PWR_ON,
998 	"POST_PWR_ON", PPMDC_POST_PWR_ON,
999 	"PWR_OFF", PPMDC_PWR_OFF,
1000 	"PWR_ON", PPMDC_PWR_ON,
1001 	"RESET_OFF", PPMDC_RESET_OFF,
1002 	"RESET_ON", PPMDC_RESET_ON,
1003 	NULL
1004 };
1005 
1006 
1007 /*
1008  * convert a #define'd symbol to its integer value where
1009  * input "symbol" is expected to be in form of "SYMBOL=value"
1010  */
1011 int
1012 ppm_convert(char *symbol, uint_t *val)
1013 {
1014 	char *s;
1015 	struct ppm_confdefs *pcfp;
1016 
1017 	if ((s = strchr(symbol, '=')) == NULL) {
1018 		cmn_err(CE_WARN, "ppm_convert: token \"%s\" syntax error in "
1019 		    "ppm.conf file, line(%d)", symbol,  __LINE__);
1020 		return (*val = (uint_t)-1);
1021 	}
1022 	s++;
1023 
1024 	for (pcfp = ppm_confdefs_table; (pcfp->sym != NULL); pcfp++) {
1025 		if (strcmp(s, pcfp->sym) == 0)
1026 			return (*val = pcfp->val);
1027 	}
1028 
1029 	cmn_err(CE_WARN, "ppm_convert: Unrecognizable token \"%s\" "
1030 	    "in ppm.conf file, line %d", symbol, __LINE__);
1031 	return (*val = (uint_t)-1);
1032 }
1033 
1034 
1035 /*
1036  * parse a domain control property string into data structure struct ppm_dc
1037  */
1038 int
1039 ppm_parse_dc(char **dc_namep, ppm_dc_t *dc)
1040 {
1041 	char	*str = "ppm_parse_dc";
1042 	char	*line;
1043 	char	*f, *b;
1044 	char    **dclist;	/* list of ppm_dc_t fields */
1045 	int	count;		/* the # of '=' indicates the # of items */
1046 	size_t	len;		/* length of line being parsed */
1047 	boolean_t done;
1048 	int	i;
1049 	int	err;
1050 
1051 	len = strlen(*dc_namep);
1052 	line = kmem_alloc(len + 1, KM_SLEEP);
1053 	(void) strcpy(line, *dc_namep);
1054 
1055 	count = ppm_count_char(line, '=');
1056 	ASSERT((count - ppm_count_char(line, ' ')) == 1);
1057 
1058 	dclist = (char **)
1059 	    kmem_zalloc((sizeof (char *) * (count + 1)), KM_SLEEP);
1060 	for (i = 0, f = b = line, done = B_FALSE; !done; i++, f = ++b) {
1061 		while (*b != ' ' && *b != 0)
1062 			b++;
1063 		if (*b == 0)
1064 			done = B_TRUE;
1065 		else
1066 			*b = 0;
1067 		dclist[i] = f;
1068 	}
1069 
1070 	for (i = 0; i < count; i++) {
1071 		if (strstr(dclist[i], "cmd=")) {
1072 			err = ppm_convert(dclist[i], &dc->cmd);
1073 			if (err == -1)
1074 				return (err);
1075 			continue;
1076 		}
1077 		if ((f = strstr(dclist[i], "path=")) != NULL) {
1078 			f += strlen("path=");
1079 			dc->path = kmem_zalloc((strlen(f) + 1), KM_SLEEP);
1080 			(void) strcpy(dc->path, f);
1081 			continue;
1082 		}
1083 		if (strstr(dclist[i], "method=")) {
1084 			err = ppm_convert(dclist[i], &dc->method);
1085 			if (err == -1)
1086 				return (err);
1087 			continue;
1088 		}
1089 		if (strstr(dclist[i], "iowr=")) {
1090 			(void) ppm_stoi(dclist[i], &dc->m_un.kio.iowr);
1091 			continue;
1092 		}
1093 		if (strstr(dclist[i], "iord=")) {
1094 			(void) ppm_stoi(dclist[i], &dc->m_un.kio.iord);
1095 			continue;
1096 		}
1097 		if (strstr(dclist[i], "val=")) {
1098 			(void) ppm_stoi(dclist[i], &dc->m_un.kio.val);
1099 			continue;
1100 		}
1101 		if (strstr(dclist[i], "speeds=")) {
1102 			ASSERT(dc->method == PPMDC_CPUSPEEDKIO);
1103 			(void) ppm_stoi(dclist[i], &dc->m_un.cpu.speeds);
1104 			continue;
1105 		}
1106 		if (strstr(dclist[i], "mask=")) {
1107 			(void) ppm_stoi(dclist[i], &dc->m_un.i2c.mask);
1108 			continue;
1109 		}
1110 		/* This must be before the if statement for delay */
1111 		if (strstr(dclist[i], "post_delay=")) {
1112 			ASSERT(dc->method == PPMDC_KIO ||
1113 			    dc->method == PPMDC_I2CKIO);
1114 			/*
1115 			 * all delays are uint_t type instead of clock_t.
1116 			 * If the delay is too long, it might get truncated.
1117 			 * But, we don't expect delay to be too long.
1118 			 */
1119 			switch (dc->method) {
1120 			case PPMDC_KIO:
1121 				(void) ppm_stoi(dclist[i],
1122 					    &dc->m_un.kio.post_delay);
1123 				break;
1124 
1125 			case PPMDC_I2CKIO:
1126 				(void) ppm_stoi(dclist[i],
1127 					    &dc->m_un.i2c.post_delay);
1128 				break;
1129 
1130 			default:
1131 				break;
1132 			}
1133 			continue;
1134 		}
1135 		if (strstr(dclist[i], "delay=")) {
1136 			ASSERT(dc->method == PPMDC_VCORE ||
1137 				dc->method == PPMDC_KIO ||
1138 				dc->method == PPMDC_I2CKIO);
1139 
1140 			/*
1141 			 * all delays are uint_t type instead of clock_t.
1142 			 * If the delay is too long, it might get truncated.
1143 			 * But, we don't expect delay to be too long.
1144 			 */
1145 
1146 			switch (dc->method) {
1147 			case PPMDC_KIO:
1148 				(void) ppm_stoi(dclist[i], &dc->m_un.kio.delay);
1149 				break;
1150 
1151 			case PPMDC_I2CKIO:
1152 				(void) ppm_stoi(dclist[i], &dc->m_un.i2c.delay);
1153 				break;
1154 
1155 			case PPMDC_VCORE:
1156 				(void) ppm_stoi(dclist[i], &dc->m_un.cpu.delay);
1157 				break;
1158 
1159 			default:
1160 				break;
1161 			}
1162 			continue;
1163 		}
1164 
1165 		/* we encounted unrecognized field, flag error */
1166 		cmn_err(CE_WARN, "%s: Unrecognized token \"%s\" in ppm.conf "
1167 		    "file, line(%d)!", str, dclist[i], __LINE__);
1168 		return (-1);
1169 	}
1170 
1171 	kmem_free(dclist, sizeof (char *) * (count + 1));
1172 	kmem_free(line, len + 1);
1173 
1174 	return (DDI_SUCCESS);
1175 }
1176 
1177 
1178 /*
1179  * search for domain control handle for a claimed device coupled with a
1180  * domain control command.  NULL device may indicate LED domain.
1181  */
1182 ppm_dc_t *
1183 ppm_lookup_dc(ppm_domain_t *domp, int cmd)
1184 {
1185 #ifdef	DEBUG
1186 	char *str = "ppm_lookup_dc";
1187 #endif
1188 	ppm_dc_t	*dc;
1189 
1190 	/*
1191 	 *  For convenience, we accept 'domp' as NULL for searching
1192 	 *  LED domain control operation.
1193 	 */
1194 	if ((cmd == PPMDC_LED_OFF) || (cmd == PPMDC_LED_ON)) {
1195 		for (domp = ppm_domain_p; domp; domp = domp->next)
1196 			if (domp->model == PPMD_LED)
1197 				break;
1198 		if (!domp || !domp->dc || !domp->dc->lh || !domp->dc->next) {
1199 			PPMD(D_LED, ("\tinsufficient led domain control "
1200 			    "information.\n"))
1201 			return (NULL);
1202 		}
1203 		if (cmd == domp->dc->cmd)
1204 			return (domp->dc);
1205 		else
1206 			return (domp->dc->next);
1207 	}
1208 
1209 
1210 	/*
1211 	 * for the rest of ppm domains, lookup ppm_dc starting from domp
1212 	 */
1213 	ASSERT(domp != NULL);
1214 	switch (cmd) {
1215 	case PPMDC_CPU_NEXT:
1216 	case PPMDC_PRE_CHNG:
1217 	case PPMDC_CPU_GO:
1218 	case PPMDC_POST_CHNG:
1219 	case PPMDC_FET_OFF:
1220 	case PPMDC_FET_ON:
1221 	case PPMDC_CLK_OFF:
1222 	case PPMDC_CLK_ON:
1223 	case PPMDC_PRE_PWR_OFF:
1224 	case PPMDC_PRE_PWR_ON:
1225 	case PPMDC_POST_PWR_ON:
1226 	case PPMDC_PWR_OFF:
1227 	case PPMDC_PWR_ON:
1228 	case PPMDC_RESET_OFF:
1229 	case PPMDC_RESET_ON:
1230 		break;
1231 	default:
1232 		PPMD(D_PPMDC, ("%s: cmd(%d) unrecognized\n", str, cmd))
1233 		return (NULL);
1234 	}
1235 
1236 	for (dc = domp->dc; dc; dc = dc->next) {
1237 		if (dc->cmd == cmd)
1238 			return (dc);
1239 	}
1240 	return (NULL);
1241 }
1242 
1243 #include <sys/esunddi.h>
1244 
1245 ppm_domain_t *
1246 ppm_get_domain_by_dev(const char *p)
1247 {
1248 	dev_info_t *dip;
1249 	ppm_domain_t	*domp;
1250 	ppm_dev_t	*pdev;
1251 	boolean_t	found = B_FALSE;
1252 
1253 	if ((dip = e_ddi_hold_devi_by_path((char *)p, 0)) == NULL)
1254 		return (NULL);
1255 
1256 	for (domp = ppm_domain_p; domp; domp = domp->next) {
1257 		for (pdev = domp->devlist; pdev; pdev = pdev->next) {
1258 			if (pdev->dip == dip) {
1259 				found = B_TRUE;
1260 				break;
1261 			}
1262 		}
1263 		if (found)
1264 			break;
1265 	}
1266 	ddi_release_devi(dip);
1267 	return (domp);
1268 }
1269 
1270 
1271 #ifdef DEBUG
1272 #define	FLINTSTR(flags, sym) { flags, sym, #sym }
1273 #define	PMR_UNKNOWN -1
1274 /*
1275  * convert a ctlop integer to a char string.  this helps printing
1276  * meaningful info when cltops are received from the pm framework.
1277  * since some ctlops are so frequent, we use mask to limit output:
1278  * a valid string is returned when ctlop is found and when
1279  * (cmd.flags & mask) is true; otherwise NULL is returned.
1280  */
1281 char *
1282 ppm_get_ctlstr(int ctlop, uint_t mask)
1283 {
1284 	struct ctlop_cmd {
1285 		uint_t flags;
1286 		int ctlop;
1287 		char *str;
1288 	};
1289 
1290 	struct ctlop_cmd *ccp;
1291 	static struct ctlop_cmd cmds[] = {
1292 		FLINTSTR(D_SETPWR, PMR_SET_POWER),
1293 		FLINTSTR(D_CTLOPS2, PMR_SUSPEND),
1294 		FLINTSTR(D_CTLOPS2, PMR_RESUME),
1295 		FLINTSTR(D_CTLOPS2, PMR_PRE_SET_POWER),
1296 		FLINTSTR(D_CTLOPS2, PMR_POST_SET_POWER),
1297 		FLINTSTR(D_CTLOPS2, PMR_PPM_SET_POWER),
1298 		FLINTSTR(0, PMR_PPM_ATTACH),
1299 		FLINTSTR(0, PMR_PPM_DETACH),
1300 		FLINTSTR(D_CTLOPS1, PMR_PPM_POWER_CHANGE_NOTIFY),
1301 		FLINTSTR(D_CTLOPS1, PMR_REPORT_PMCAP),
1302 		FLINTSTR(D_CTLOPS1, PMR_CHANGED_POWER),
1303 		FLINTSTR(D_CTLOPS2, PMR_PPM_INIT_CHILD),
1304 		FLINTSTR(D_CTLOPS2, PMR_PPM_UNINIT_CHILD),
1305 		FLINTSTR(D_CTLOPS2, PMR_PPM_PRE_PROBE),
1306 		FLINTSTR(D_CTLOPS2, PMR_PPM_POST_PROBE),
1307 		FLINTSTR(D_CTLOPS2, PMR_PPM_PRE_ATTACH),
1308 		FLINTSTR(D_CTLOPS2, PMR_PPM_POST_ATTACH),
1309 		FLINTSTR(D_CTLOPS2, PMR_PPM_PRE_DETACH),
1310 		FLINTSTR(D_CTLOPS2, PMR_PPM_POST_DETACH),
1311 		FLINTSTR(D_CTLOPS1, PMR_PPM_UNMANAGE),
1312 		FLINTSTR(D_CTLOPS2, PMR_PPM_PRE_RESUME),
1313 		FLINTSTR(D_CTLOPS1, PMR_PPM_ALL_LOWEST),
1314 		FLINTSTR(D_LOCKS, PMR_PPM_LOCK_POWER),
1315 		FLINTSTR(D_LOCKS, PMR_PPM_UNLOCK_POWER),
1316 		FLINTSTR(D_LOCKS, PMR_PPM_TRY_LOCK_POWER),
1317 		FLINTSTR(D_LOCKS, PMR_PPM_POWER_LOCK_OWNER),
1318 		FLINTSTR(D_CTLOPS1 | D_CTLOPS2, PMR_UNKNOWN),
1319 	};
1320 
1321 	for (ccp = cmds; ccp->ctlop != PMR_UNKNOWN; ccp++)
1322 		if (ctlop == ccp->ctlop)
1323 			break;
1324 
1325 	if (ccp->flags & mask)
1326 		return (ccp->str);
1327 	return (NULL);
1328 }
1329 
1330 void
1331 ppm_print_dc(ppm_dc_t *dc)
1332 {
1333 	ppm_dc_t	*d = dc;
1334 
1335 	PPMD(D_PPMDC, ("\nAdds ppm_dc: path(%s),\n     cmd(%x), "
1336 	    "method(%x), ", d->path, d->cmd, d->method))
1337 	if (d->method == PPMDC_I2CKIO) {
1338 		PPMD(D_PPMDC, ("i2c.iowr(%x), i2c.val(0x%X), "
1339 		    "i2c.mask(0x%X)", d->m_un.i2c.iowr,
1340 		    d->m_un.i2c.val,  d->m_un.i2c.mask))
1341 	} else if (d->method == PPMDC_KIO) {
1342 		PPMD(D_PPMDC, ("kio.iowr(%x), kio.val(0x%X)",
1343 		    d->m_un.kio.iowr, d->m_un.kio.val))
1344 	} else if (d->method == PPMDC_VCORE) {
1345 		PPMD(D_PPMDC, ("cpu: .iord(%x), .iowr(%x), .val(0x%X), "
1346 		    ".delay(0x%x)",
1347 		    d->m_un.cpu.iord, d->m_un.cpu.iowr, d->m_un.cpu.val,
1348 		    d->m_un.cpu.delay))
1349 	} else if (d->method == PPMDC_CPUSPEEDKIO) {
1350 		PPMD(D_PPMDC, ("cpu.iowr(%x), cpu.speeds(0x%X)",
1351 		    d->m_un.cpu.iowr, d->m_un.cpu.speeds))
1352 	}
1353 	PPMD(D_PPMDC, ("\n"))
1354 }
1355 #endif	/* DEBUG */
1356