1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ 23 /* All Rights Reserved */ 24 25 26 #ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.3 */ 27 28 29 30 /* If running SVR3, #define both ATTSVR3 and ATTSV */ 31 #define ATTSVR3 /* System V Release 3 */ 32 33 /* One of the following four lines should not be commented out. 34 * The other three should be unless you are running a unique hybrid. 35 */ 36 37 #define ATTSV /* System III or System V */ 38 /* #define V7 */ /* Version 7 systems (32V, Berkeley 4BSD, 4.1BSD) */ 39 /* #define BSD4_2 */ /* Berkeley 4.2BSD */ 40 /* #define V8 */ /* Research Eighth Edition */ 41 42 /* Owner of setud files running on behalf of uucp. Needed in case 43 * root runs uucp and euid is not honored by kernel. 44 * GID is needed for some chown() calls. 45 * Also used if guinfo() cannot find the current users ID in the 46 * password file. 47 */ 48 #define UUCPUID (uid_t) 5 /* */ 49 #define UUCPGID (gid_t) 5 /* */ 50 51 /* define ATTSVKILL if your system has a kill(2) that accepts kill(0, pid) 52 * as a test for killability. If ATTSV is defined this will automatically 53 * be defined anyway. 54 */ 55 #define ATTSVKILL /* */ 56 57 /* 58 * the next two lines control high resolution sleeps, called naps. 59 * 60 * most UNIX versions have no nap() system call; they want NONAP defined, 61 * in which case one is provided in the code. this includes all standard 62 * versions of UNIX. 63 * 64 * some sites use a fast timer that reads a number of clock ticks and naps 65 * for that interval; they want NONAP defined, and FASTTIMER defined as 66 * the name of the device, e.g., /dev/ft. 67 * 68 * repeating, NONAP should be disabled *only* if your standard library has a 69 * function called nap. 70 */ 71 72 73 #define NONAP /* nominal case -- no nap() in the standard library */ 74 /* #define FASTTIMER "/dev/ft" */ /* identify the device used for naps */ 75 76 /* 77 * we use ustat to decide whether there's enough space to receive a 78 * file. if you're not ATTSV, you can use a setgid program to read the 79 * number of free blocks and free inodes directly off the disk. if you 80 * choose this course, do not define NOUSTAT; rather, define V7USTAT to 81 * be the name of that program. be sure it accepts 2 args, major and minor 82 * device numbers, and returns two numbers, blocks and inodes, in 83 * "%d %d" format, or you'll never receive another file. 84 */ 85 /* #define V7USTAT "/usr/local/lib/ustat" */ 86 /* #define NOUSTAT */ /* define NOUSTAT if you don't have ustat */ 87 88 /* define GRPCHK if you want to restrict the ability to read */ 89 /* Systems file stuff by way of the DEBUG flags based on a group id range */ 90 /* ex: if (GRPCHK(getgid()) no_secrets(); */ 91 #define GRPMIN (gid_t) 2 /* */ 92 #define GRPMAX (gid_t) 10 /* */ 93 #define GRPCHK(gid) ( gid >= GRPMIN && gid <= GRPMAX ? 1 : 0 ) /* */ 94 /* #define GRPCHK(gid) 1 */ /* Systems info is not protected from DEBUG */ 95 96 /* definitions for the types of networks and dialers that are available */ 97 /* used to depend on STANDALONE, but now done at runtime via Sysfiles */ 98 #define DATAKIT /* define DATAKIT if datakit is available. */ 99 /* #define UNET */ /* define UNET if you have 3com ethernet software */ 100 /* #define TCP */ /* TCP (bsd systems) */ 101 /* #define SYTEK*/ /* for sytek network */ 102 103 #ifdef ATTSVR3 104 #define TLI /* for AT&T Transport Layer Interface networks */ 105 #define TLIS /* for AT&T Transport Layer Interface networks */ 106 /* with streams module "tirdwr" */ 107 #endif /* ATTSVR3 */ 108 109 #define DIAL801 /* 801/212-103 auto dialers */ 110 111 /* define DUMB_DN if your dn driver (801 acu) cannot handle '=' */ 112 /* #define DUMB_DN */ 113 114 /* 115 * Define protocols that are to be linked into uucico: 116 * 117 * The following table shows which protocols and networks work well 118 * together. The g protocol works over noisy links. The e protocol 119 * assumes that the underlying network provides an error free communications 120 * channel that transfers the data in sequence without duplication. The 121 * d protocols makes the same assumptions as the e protocol, but in addition 122 * it does Datakit specific ioctl's. The g protocol is always included in 123 * uucico. To include the other protocols, 1) insure that the symbol from 124 * the Symbol column is defined in this file and 2) include the file from 125 * the File comlumn in the definition of PROTOCOLS in uucp.mk. 126 * 127 * Prot. 128 * Letter Symbol File Applicable Media 129 * 130 * g none - - 131 * e E_PROTOCOL eio.c TCP, UNET, TLI, and DATAKIT. 132 * d D_PROTOCOL dio.c DATAKIT 133 * x X_PROTOCOL xio.c - 134 * 135 * The next six lines conditionally define the protocol symbols for d 136 * and e protocols based on the networks that were chosen above. For the 137 * x protocol you must explicitly define X_PROTOCOL. 138 */ 139 140 #ifdef DATAKIT /* Should include D protocol for Datakit. */ 141 #define D_PROTOCOL 142 #endif /* DATAKIT */ 143 144 #if defined TCP || defined UNET || defined TLI || defined DATAKIT 145 #define E_PROTOCOL /* Include e protocol. */ 146 #endif /* TCP || UNET || TLI || DATAKIT */ 147 148 /* #define X_PROTOCOL */ /* define X_PROTOCOL to use the xio protocol */ 149 #define X_PROTOCOL /* aeh - to check compilation */ 150 151 #define MAXCALLTRIES 2 /* maximum call attempts per Systems file line */ 152 153 /* define DEFAULT_BAUDRATE to be the baud rate you want to use when both */ 154 /* Systems file and Devices file allow Any */ 155 #define DEFAULT_BAUDRATE "9600" /* */ 156 157 /*define permission modes for the device */ 158 #define M_DEVICEMODE (mode_t) 0600 /* MASTER device mode */ 159 #define S_DEVICEMODE (mode_t) 0600 /* SLAVE device mode */ 160 #define R_DEVICEMODE (mode_t) 0600 /* default mode to restore */ 161 162 /* NO_MODEM_CTRL - define this if you have very old hardware 163 * that does not know how to correctly handle modem control 164 * Some old pdp/11 hardware such as dk, dl 165 * If you define this, and have DH devices for direct lines, 166 * the ports will often hang and be unusable. 167 */ 168 /*#define NO_MODEM_CTRL */ 169 170 171 /* UUSTAT_TBL - this is the maximum number of machines that 172 * status may be needed at any instant. 173 * If you are not concerned with memory for a seldom used program, 174 * make it very large. 175 * This number is also used in uusched for its machine table -- it has 176 * the same properties as the one in uustat. 177 */ 178 179 /* #define UUSTAT_TBL 1000 */ /* big machine with lots of traffic */ 180 #define UUSTAT_TBL 200 181 182 /* define UNAME if uname() should be used to get uucpname 183 * This will be defined automatically if ATTSV is defined 184 */ 185 #define UNAME /* */ 186 187 /* initial wait time after failure before retry */ 188 #define RETRYTIME 300 /* 5 minutes */ 189 /* MAXRETRYTIME is for exponential backoff limit. 190 * NOTE - this should not be 24 hours so that 191 * retry is not always at the same time each day 192 */ 193 #define MAXRETRYTIME 82800 /* 23 hours */ 194 #define ASSERT_RETRYTIME 86400 /* retry time for ASSERT errors */ 195 196 /* This is the path that will be used for uuxqt command executions */ 197 #define PATH "PATH=/usr/bin " /* */ 198 199 /* This is the set of default commands that can be executed */ 200 /* if non is given for the system name in PERMISSIONS file */ 201 /* It is a colon separated list as in PERMISSIONS file */ 202 #define DEFAULTCMDS "rmail" /* standard default command list */ 203 204 /* define HZ to be the number of clock ticks per second */ 205 /* #define HZ 60 */ /* not needed for ATTSV or above */ 206 207 /* 208 * put in local uucp name of this machine if there is no "/etc/whoami" 209 * and no uname() (this is a last resort) 210 */ 211 #define MYNAME "kilroy" /* */ 212 213 /* define NOSTRANGERS if you want to reject calls from systems which 214 * are not in your Systems file. If defined, NOSTRANGERS should be the name 215 * of the program to execute when such a system dials in. The argument 216 * to said program will be the name of said system. Typically this is a shell 217 * procedure that sends mail to the uucp administrator informing them of an 218 * attempt to communicate by an unknown system. 219 * NOTE - if this is defined, it can be overridden by the administrator 220 * by making the command non-executable. (It can be turned on and off 221 * by changing the mode of the command.) 222 */ 223 #define NOSTRANGERS "/usr/lib/uucp/remote.unknown" /* */ 224 225 /* define LIMITS to be the name of a file which contains information 226 * about the number of simultaneous uucicos,uuxqts, and uuscheds 227 * that are allowed to run. If it is not defined, then there may be 228 * "many" uucicos, uuxqts, and uuscheds running. 229 */ 230 #define LIMITS "/etc/uucp/Limits" /* */ 231 232 /* define USRSPOOLLOCKS if you like your lock files in /var/spool/locks 233 * be sure other programs such as 'cu' and 'ct' know about this 234 * 235 * WARNING: if you do not define USRSPOOLLOCKS, then $LOCK in 236 * uudemon.cleanup must be changed. 237 */ 238 #define USRSPOOLLOCKS /* define to use /var/spool/locks for LCK files */ 239 240 /* define PKSPEEDUP if you want to try the recommended speedup in pkcget. 241 * this entails sleeping between reads at low baud rates. 242 */ 243 #define PKSPEEDUP /* */ 244