1# 2# File system configuration 3# 4 5menu "File systems" 6 7config EXT2_FS 8 tristate "Second extended fs support" 9 help 10 Ext2 is a standard Linux file system for hard disks. 11 12 To compile this file system support as a module, choose M here: the 13 module will be called ext2. Be aware however that the file system 14 of your root partition (the one containing the directory /) cannot 15 be compiled as a module, and so this could be dangerous. 16 17 If unsure, say Y. 18 19config EXT2_FS_XATTR 20 bool "Ext2 extended attributes" 21 depends on EXT2_FS 22 help 23 Extended attributes are name:value pairs associated with inodes by 24 the kernel or by users (see the attr(5) manual page, or visit 25 <http://acl.bestbits.at/> for details). 26 27 If unsure, say N. 28 29config EXT2_FS_POSIX_ACL 30 bool "Ext2 POSIX Access Control Lists" 31 depends on EXT2_FS_XATTR 32 help 33 Posix Access Control Lists (ACLs) support permissions for users and 34 groups beyond the owner/group/world scheme. 35 36 To learn more about Access Control Lists, visit the Posix ACLs for 37 Linux website <http://acl.bestbits.at/>. 38 39 If you don't know what Access Control Lists are, say N 40 41config EXT2_FS_SECURITY 42 bool "Ext2 Security Labels" 43 depends on EXT2_FS_XATTR 44 help 45 Security labels support alternative access control models 46 implemented by security modules like SELinux. This option 47 enables an extended attribute handler for file security 48 labels in the ext2 filesystem. 49 50 If you are not using a security module that requires using 51 extended attributes for file security labels, say N. 52 53config EXT3_FS 54 tristate "Ext3 journalling file system support" 55 help 56 This is the journaling version of the Second extended file system 57 (often called ext3), the de facto standard Linux file system 58 (method to organize files on a storage device) for hard disks. 59 60 The journaling code included in this driver means you do not have 61 to run e2fsck (file system checker) on your file systems after a 62 crash. The journal keeps track of any changes that were being made 63 at the time the system crashed, and can ensure that your file system 64 is consistent without the need for a lengthy check. 65 66 Other than adding the journal to the file system, the on-disk format 67 of ext3 is identical to ext2. It is possible to freely switch 68 between using the ext3 driver and the ext2 driver, as long as the 69 file system has been cleanly unmounted, or e2fsck is run on the file 70 system. 71 72 To add a journal on an existing ext2 file system or change the 73 behavior of ext3 file systems, you can use the tune2fs utility ("man 74 tune2fs"). To modify attributes of files and directories on ext3 75 file systems, use chattr ("man chattr"). You need to be using 76 e2fsprogs version 1.20 or later in order to create ext3 journals 77 (available at <http://sourceforge.net/projects/e2fsprogs/>). 78 79 To compile this file system support as a module, choose M here: the 80 module will be called ext3. Be aware however that the file system 81 of your root partition (the one containing the directory /) cannot 82 be compiled as a module, and so this may be dangerous. 83 84config EXT3_FS_XATTR 85 bool "Ext3 extended attributes" 86 depends on EXT3_FS 87 default y 88 help 89 Extended attributes are name:value pairs associated with inodes by 90 the kernel or by users (see the attr(5) manual page, or visit 91 <http://acl.bestbits.at/> for details). 92 93 If unsure, say N. 94 95 You need this for POSIX ACL support on ext3. 96 97config EXT3_FS_POSIX_ACL 98 bool "Ext3 POSIX Access Control Lists" 99 depends on EXT3_FS_XATTR 100 help 101 Posix Access Control Lists (ACLs) support permissions for users and 102 groups beyond the owner/group/world scheme. 103 104 To learn more about Access Control Lists, visit the Posix ACLs for 105 Linux website <http://acl.bestbits.at/>. 106 107 If you don't know what Access Control Lists are, say N 108 109config EXT3_FS_SECURITY 110 bool "Ext3 Security Labels" 111 depends on EXT3_FS_XATTR 112 help 113 Security labels support alternative access control models 114 implemented by security modules like SELinux. This option 115 enables an extended attribute handler for file security 116 labels in the ext3 filesystem. 117 118 If you are not using a security module that requires using 119 extended attributes for file security labels, say N. 120 121config JBD 122# CONFIG_JBD could be its own option (even modular), but until there are 123# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS 124# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS 125 tristate 126 default EXT3_FS 127 help 128 This is a generic journaling layer for block devices. It is 129 currently used by the ext3 file system, but it could also be used to 130 add journal support to other file systems or block devices such as 131 RAID or LVM. 132 133 If you are using the ext3 file system, you need to say Y here. If 134 you are not using ext3 then you will probably want to say N. 135 136 To compile this device as a module, choose M here: the module will be 137 called jbd. If you are compiling ext3 into the kernel, you cannot 138 compile this code as a module. 139 140config JBD_DEBUG 141 bool "JBD (ext3) debugging support" 142 depends on JBD 143 help 144 If you are using the ext3 journaled file system (or potentially any 145 other file system/device using JBD), this option allows you to 146 enable debugging output while the system is running, in order to 147 help track down any problems you are having. By default the 148 debugging output will be turned off. 149 150 If you select Y here, then you will be able to turn on debugging 151 with "echo N > /proc/sys/fs/jbd-debug", where N is a number between 152 1 and 5, the higher the number, the more debugging output is 153 generated. To turn debugging off again, do 154 "echo 0 > /proc/sys/fs/jbd-debug". 155 156config FS_MBCACHE 157# Meta block cache for Extended Attributes (ext2/ext3) 158 tristate 159 depends on EXT2_FS_XATTR || EXT3_FS_XATTR 160 default y if EXT2_FS=y || EXT3_FS=y 161 default m if EXT2_FS=m || EXT3_FS=m 162 163config REISERFS_FS 164 tristate "Reiserfs support" 165 help 166 Stores not just filenames but the files themselves in a balanced 167 tree. Uses journaling. 168 169 Balanced trees are more efficient than traditional file system 170 architectural foundations. 171 172 In general, ReiserFS is as fast as ext2, but is very efficient with 173 large directories and small files. Additional patches are needed 174 for NFS and quotas, please see <http://www.namesys.com/> for links. 175 176 It is more easily extended to have features currently found in 177 database and keyword search systems than block allocation based file 178 systems are. The next version will be so extended, and will support 179 plugins consistent with our motto ``It takes more than a license to 180 make source code open.'' 181 182 Read <http://www.namesys.com/> to learn more about reiserfs. 183 184 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. 185 186 If you like it, you can pay us to add new features to it that you 187 need, buy a support contract, or pay us to port it to another OS. 188 189config REISERFS_CHECK 190 bool "Enable reiserfs debug mode" 191 depends on REISERFS_FS 192 help 193 If you set this to Y, then ReiserFS will perform every check it can 194 possibly imagine of its internal consistency throughout its 195 operation. It will also go substantially slower. More than once we 196 have forgotten that this was on, and then gone despondent over the 197 latest benchmarks.:-) Use of this option allows our team to go all 198 out in checking for consistency when debugging without fear of its 199 effect on end users. If you are on the verge of sending in a bug 200 report, say Y and you might get a useful error message. Almost 201 everyone should say N. 202 203config REISERFS_PROC_INFO 204 bool "Stats in /proc/fs/reiserfs" 205 depends on REISERFS_FS 206 help 207 Create under /proc/fs/reiserfs a hierarchy of files, displaying 208 various ReiserFS statistics and internal data at the expense of 209 making your kernel or module slightly larger (+8 KB). This also 210 increases the amount of kernel memory required for each mount. 211 Almost everyone but ReiserFS developers and people fine-tuning 212 reiserfs or tracing problems should say N. 213 214config REISERFS_FS_XATTR 215 bool "ReiserFS extended attributes" 216 depends on REISERFS_FS 217 help 218 Extended attributes are name:value pairs associated with inodes by 219 the kernel or by users (see the attr(5) manual page, or visit 220 <http://acl.bestbits.at/> for details). 221 222 If unsure, say N. 223 224config REISERFS_FS_POSIX_ACL 225 bool "ReiserFS POSIX Access Control Lists" 226 depends on REISERFS_FS_XATTR 227 help 228 Posix Access Control Lists (ACLs) support permissions for users and 229 groups beyond the owner/group/world scheme. 230 231 To learn more about Access Control Lists, visit the Posix ACLs for 232 Linux website <http://acl.bestbits.at/>. 233 234 If you don't know what Access Control Lists are, say N 235 236config REISERFS_FS_SECURITY 237 bool "ReiserFS Security Labels" 238 depends on REISERFS_FS_XATTR 239 help 240 Security labels support alternative access control models 241 implemented by security modules like SELinux. This option 242 enables an extended attribute handler for file security 243 labels in the ReiserFS filesystem. 244 245 If you are not using a security module that requires using 246 extended attributes for file security labels, say N. 247 248config JFS_FS 249 tristate "JFS filesystem support" 250 select NLS 251 help 252 This is a port of IBM's Journaled Filesystem . More information is 253 available in the file <file:Documentation/filesystems/jfs.txt>. 254 255 If you do not intend to use the JFS filesystem, say N. 256 257config JFS_POSIX_ACL 258 bool "JFS POSIX Access Control Lists" 259 depends on JFS_FS 260 help 261 Posix Access Control Lists (ACLs) support permissions for users and 262 groups beyond the owner/group/world scheme. 263 264 To learn more about Access Control Lists, visit the Posix ACLs for 265 Linux website <http://acl.bestbits.at/>. 266 267 If you don't know what Access Control Lists are, say N 268 269config JFS_SECURITY 270 bool "JFS Security Labels" 271 depends on JFS_FS 272 help 273 Security labels support alternative access control models 274 implemented by security modules like SELinux. This option 275 enables an extended attribute handler for file security 276 labels in the jfs filesystem. 277 278 If you are not using a security module that requires using 279 extended attributes for file security labels, say N. 280 281config JFS_DEBUG 282 bool "JFS debugging" 283 depends on JFS_FS 284 help 285 If you are experiencing any problems with the JFS filesystem, say 286 Y here. This will result in additional debugging messages to be 287 written to the system log. Under normal circumstances, this 288 results in very little overhead. 289 290config JFS_STATISTICS 291 bool "JFS statistics" 292 depends on JFS_FS 293 help 294 Enabling this option will cause statistics from the JFS file system 295 to be made available to the user in the /proc/fs/jfs/ directory. 296 297config FS_POSIX_ACL 298# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs) 299# 300# NOTE: you can implement Posix ACLs without these helpers (XFS does). 301# Never use this symbol for ifdefs. 302# 303 bool 304 depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL || REISERFS_FS_POSIX_ACL || NFSD_V4 305 default y 306 307source "fs/xfs/Kconfig" 308 309config MINIX_FS 310 tristate "Minix fs support" 311 help 312 Minix is a simple operating system used in many classes about OS's. 313 The minix file system (method to organize files on a hard disk 314 partition or a floppy disk) was the original file system for Linux, 315 but has been superseded by the second extended file system ext2fs. 316 You don't want to use the minix file system on your hard disk 317 because of certain built-in restrictions, but it is sometimes found 318 on older Linux floppy disks. This option will enlarge your kernel 319 by about 28 KB. If unsure, say N. 320 321 To compile this file system support as a module, choose M here: the 322 module will be called minix. Note that the file system of your root 323 partition (the one containing the directory /) cannot be compiled as 324 a module. 325 326config ROMFS_FS 327 tristate "ROM file system support" 328 ---help--- 329 This is a very small read-only file system mainly intended for 330 initial ram disks of installation disks, but it could be used for 331 other read-only media as well. Read 332 <file:Documentation/filesystems/romfs.txt> for details. 333 334 To compile this file system support as a module, choose M here: the 335 module will be called romfs. Note that the file system of your 336 root partition (the one containing the directory /) cannot be a 337 module. 338 339 If you don't know whether you need it, then you don't need it: 340 answer N. 341 342config QUOTA 343 bool "Quota support" 344 help 345 If you say Y here, you will be able to set per user limits for disk 346 usage (also called disk quotas). Currently, it works for the 347 ext2, ext3, and reiserfs file system. ext3 also supports journalled 348 quotas for which you don't need to run quotacheck(8) after an unclean 349 shutdown. You need additional software in order to use quota support 350 (you can download sources from 351 <http://www.sf.net/projects/linuxquota/>). For further details, read 352 the Quota mini-HOWTO, available from 353 <http://www.tldp.org/docs.html#howto>, or the documentation provided 354 with the quota tools. Probably the quota support is only useful for 355 multi user systems. If unsure, say N. 356 357config QFMT_V1 358 tristate "Old quota format support" 359 depends on QUOTA 360 help 361 This quota format was (is) used by kernels earlier than 2.4.22. If 362 you have quota working and you don't want to convert to new quota 363 format say Y here. 364 365config QFMT_V2 366 tristate "Quota format v2 support" 367 depends on QUOTA 368 help 369 This quota format allows using quotas with 32-bit UIDs/GIDs. If you 370 need this functionality say Y here. Note that you will need recent 371 quota utilities (>= 3.01) for new quota format with this kernel. 372 373config QUOTACTL 374 bool 375 depends on XFS_QUOTA || QUOTA 376 default y 377 378config DNOTIFY 379 bool "Dnotify support" if EMBEDDED 380 default y 381 help 382 Dnotify is a directory-based per-fd file change notification system 383 that uses signals to communicate events to user-space. There exist 384 superior alternatives, but some applications may still rely on 385 dnotify. 386 387 Because of this, if unsure, say Y. 388 389config AUTOFS_FS 390 tristate "Kernel automounter support" 391 help 392 The automounter is a tool to automatically mount remote file systems 393 on demand. This implementation is partially kernel-based to reduce 394 overhead in the already-mounted case; this is unlike the BSD 395 automounter (amd), which is a pure user space daemon. 396 397 To use the automounter you need the user-space tools from the autofs 398 package; you can find the location in <file:Documentation/Changes>. 399 You also want to answer Y to "NFS file system support", below. 400 401 If you want to use the newer version of the automounter with more 402 features, say N here and say Y to "Kernel automounter v4 support", 403 below. 404 405 To compile this support as a module, choose M here: the module will be 406 called autofs. 407 408 If you are not a part of a fairly large, distributed network, you 409 probably do not need an automounter, and can say N here. 410 411config AUTOFS4_FS 412 tristate "Kernel automounter version 4 support (also supports v3)" 413 help 414 The automounter is a tool to automatically mount remote file systems 415 on demand. This implementation is partially kernel-based to reduce 416 overhead in the already-mounted case; this is unlike the BSD 417 automounter (amd), which is a pure user space daemon. 418 419 To use the automounter you need the user-space tools from 420 <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also 421 want to answer Y to "NFS file system support", below. 422 423 To compile this support as a module, choose M here: the module will be 424 called autofs4. You will need to add "alias autofs autofs4" to your 425 modules configuration file. 426 427 If you are not a part of a fairly large, distributed network or 428 don't have a laptop which needs to dynamically reconfigure to the 429 local network, you probably do not need an automounter, and can say 430 N here. 431 432menu "CD-ROM/DVD Filesystems" 433 434config ISO9660_FS 435 tristate "ISO 9660 CDROM file system support" 436 help 437 This is the standard file system used on CD-ROMs. It was previously 438 known as "High Sierra File System" and is called "hsfs" on other 439 Unix systems. The so-called Rock-Ridge extensions which allow for 440 long Unix filenames and symbolic links are also supported by this 441 driver. If you have a CD-ROM drive and want to do more with it than 442 just listen to audio CDs and watch its LEDs, say Y (and read 443 <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO, 444 available from <http://www.tldp.org/docs.html#howto>), thereby 445 enlarging your kernel by about 27 KB; otherwise say N. 446 447 To compile this file system support as a module, choose M here: the 448 module will be called isofs. 449 450config JOLIET 451 bool "Microsoft Joliet CDROM extensions" 452 depends on ISO9660_FS 453 select NLS 454 help 455 Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system 456 which allows for long filenames in unicode format (unicode is the 457 new 16 bit character code, successor to ASCII, which encodes the 458 characters of almost all languages of the world; see 459 <http://www.unicode.org/> for more information). Say Y here if you 460 want to be able to read Joliet CD-ROMs under Linux. 461 462config ZISOFS 463 bool "Transparent decompression extension" 464 depends on ISO9660_FS 465 select ZLIB_INFLATE 466 help 467 This is a Linux-specific extension to RockRidge which lets you store 468 data in compressed form on a CD-ROM and have it transparently 469 decompressed when the CD-ROM is accessed. See 470 <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools 471 necessary to create such a filesystem. Say Y here if you want to be 472 able to read such compressed CD-ROMs. 473 474config ZISOFS_FS 475# for fs/nls/Config.in 476 tristate 477 depends on ZISOFS 478 default ISO9660_FS 479 480config UDF_FS 481 tristate "UDF file system support" 482 help 483 This is the new file system used on some CD-ROMs and DVDs. Say Y if 484 you intend to mount DVD discs or CDRW's written in packet mode, or 485 if written to by other UDF utilities, such as DirectCD. 486 Please read <file:Documentation/filesystems/udf.txt>. 487 488 To compile this file system support as a module, choose M here: the 489 module will be called udf. 490 491 If unsure, say N. 492 493config UDF_NLS 494 bool 495 default y 496 depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) 497 498endmenu 499 500menu "DOS/FAT/NT Filesystems" 501 502config FAT_FS 503 tristate 504 select NLS 505 help 506 If you want to use one of the FAT-based file systems (the MS-DOS and 507 VFAT (Windows 95) file systems), then you must say Y or M here 508 to include FAT support. You will then be able to mount partitions or 509 diskettes with FAT-based file systems and transparently access the 510 files on them, i.e. MSDOS files will look and behave just like all 511 other Unix files. 512 513 This FAT support is not a file system in itself, it only provides 514 the foundation for the other file systems. You will have to say Y or 515 M to at least one of "MSDOS fs support" or "VFAT fs support" in 516 order to make use of it. 517 518 Another way to read and write MSDOS floppies and hard drive 519 partitions from within Linux (but not transparently) is with the 520 mtools ("man mtools") program suite. You don't need to say Y here in 521 order to do that. 522 523 If you need to move large files on floppies between a DOS and a 524 Linux box, say Y here, mount the floppy under Linux with an MSDOS 525 file system and use GNU tar's M option. GNU tar is a program 526 available for Unix and DOS ("man tar" or "info tar"). 527 528 It is now also becoming possible to read and write compressed FAT 529 file systems; read <file:Documentation/filesystems/fat_cvf.txt> for 530 details. 531 532 The FAT support will enlarge your kernel by about 37 KB. If unsure, 533 say Y. 534 535 To compile this as a module, choose M here: the module will be called 536 fat. Note that if you compile the FAT support as a module, you 537 cannot compile any of the FAT-based file systems into the kernel 538 -- they will have to be modules as well. 539 540config MSDOS_FS 541 tristate "MSDOS fs support" 542 select FAT_FS 543 help 544 This allows you to mount MSDOS partitions of your hard drive (unless 545 they are compressed; to access compressed MSDOS partitions under 546 Linux, you can either use the DOS emulator DOSEMU, described in the 547 DOSEMU-HOWTO, available from 548 <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in 549 <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you 550 intend to use dosemu with a non-compressed MSDOS partition, say Y 551 here) and MSDOS floppies. This means that file access becomes 552 transparent, i.e. the MSDOS files look and behave just like all 553 other Unix files. 554 555 If you have Windows 95 or Windows NT installed on your MSDOS 556 partitions, you should use the VFAT file system (say Y to "VFAT fs 557 support" below), or you will not be able to see the long filenames 558 generated by Windows 95 / Windows NT. 559 560 This option will enlarge your kernel by about 7 KB. If unsure, 561 answer Y. This will only work if you said Y to "DOS FAT fs support" 562 as well. To compile this as a module, choose M here: the module will 563 be called msdos. 564 565config VFAT_FS 566 tristate "VFAT (Windows-95) fs support" 567 select FAT_FS 568 help 569 This option provides support for normal Windows file systems with 570 long filenames. That includes non-compressed FAT-based file systems 571 used by Windows 95, Windows 98, Windows NT 4.0, and the Unix 572 programs from the mtools package. 573 574 The VFAT support enlarges your kernel by about 10 KB and it only 575 works if you said Y to the "DOS FAT fs support" above. Please read 576 the file <file:Documentation/filesystems/vfat.txt> for details. If 577 unsure, say Y. 578 579 To compile this as a module, choose M here: the module will be called 580 vfat. 581 582config FAT_DEFAULT_CODEPAGE 583 int "Default codepage for FAT" 584 depends on MSDOS_FS || VFAT_FS 585 default 437 586 help 587 This option should be set to the codepage of your FAT filesystems. 588 It can be overridden with the "codepage" mount option. 589 See <file:Documentation/filesystems/vfat.txt> for more information. 590 591config FAT_DEFAULT_IOCHARSET 592 string "Default iocharset for FAT" 593 depends on VFAT_FS 594 default "iso8859-1" 595 help 596 Set this to the default input/output character set you'd 597 like FAT to use. It should probably match the character set 598 that most of your FAT filesystems use, and can be overridden 599 with the "iocharset" mount option for FAT filesystems. 600 Note that "utf8" is not recommended for FAT filesystems. 601 If unsure, you shouldn't set "utf8" here. 602 See <file:Documentation/filesystems/vfat.txt> for more information. 603 604config NTFS_FS 605 tristate "NTFS file system support" 606 select NLS 607 help 608 NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. 609 610 Saying Y or M here enables read support. There is partial, but 611 safe, write support available. For write support you must also 612 say Y to "NTFS write support" below. 613 614 There are also a number of user-space tools available, called 615 ntfsprogs. These include ntfsundelete and ntfsresize, that work 616 without NTFS support enabled in the kernel. 617 618 This is a rewrite from scratch of Linux NTFS support and replaced 619 the old NTFS code starting with Linux 2.5.11. A backport to 620 the Linux 2.4 kernel series is separately available as a patch 621 from the project web site. 622 623 For more information see <file:Documentation/filesystems/ntfs.txt> 624 and <http://linux-ntfs.sourceforge.net/>. 625 626 To compile this file system support as a module, choose M here: the 627 module will be called ntfs. 628 629 If you are not using Windows NT, 2000, XP or 2003 in addition to 630 Linux on your computer it is safe to say N. 631 632config NTFS_DEBUG 633 bool "NTFS debugging support" 634 depends on NTFS_FS 635 help 636 If you are experiencing any problems with the NTFS file system, say 637 Y here. This will result in additional consistency checks to be 638 performed by the driver as well as additional debugging messages to 639 be written to the system log. Note that debugging messages are 640 disabled by default. To enable them, supply the option debug_msgs=1 641 at the kernel command line when booting the kernel or as an option 642 to insmod when loading the ntfs module. Once the driver is active, 643 you can enable debugging messages by doing (as root): 644 echo 1 > /proc/sys/fs/ntfs-debug 645 Replacing the "1" with "0" would disable debug messages. 646 647 If you leave debugging messages disabled, this results in little 648 overhead, but enabling debug messages results in very significant 649 slowdown of the system. 650 651 When reporting bugs, please try to have available a full dump of 652 debugging messages while the misbehaviour was occurring. 653 654config NTFS_RW 655 bool "NTFS write support" 656 depends on NTFS_FS 657 help 658 This enables the partial, but safe, write support in the NTFS driver. 659 660 The only supported operation is overwriting existing files, without 661 changing the file length. No file or directory creation, deletion or 662 renaming is possible. Note only non-resident files can be written to 663 so you may find that some very small files (<500 bytes or so) cannot 664 be written to. 665 666 While we cannot guarantee that it will not damage any data, we have 667 so far not received a single report where the driver would have 668 damaged someones data so we assume it is perfectly safe to use. 669 670 Note: While write support is safe in this version (a rewrite from 671 scratch of the NTFS support), it should be noted that the old NTFS 672 write support, included in Linux 2.5.10 and before (since 1997), 673 is not safe. 674 675 This is currently useful with TopologiLinux. TopologiLinux is run 676 on top of any DOS/Microsoft Windows system without partitioning your 677 hard disk. Unlike other Linux distributions TopologiLinux does not 678 need its own partition. For more information see 679 <http://topologi-linux.sourceforge.net/> 680 681 It is perfectly safe to say N here. 682 683endmenu 684 685menu "Pseudo filesystems" 686 687config PROC_FS 688 bool "/proc file system support" 689 help 690 This is a virtual file system providing information about the status 691 of the system. "Virtual" means that it doesn't take up any space on 692 your hard disk: the files are created on the fly by the kernel when 693 you try to access them. Also, you cannot read the files with older 694 version of the program less: you need to use more or cat. 695 696 It's totally cool; for example, "cat /proc/interrupts" gives 697 information about what the different IRQs are used for at the moment 698 (there is a small number of Interrupt ReQuest lines in your computer 699 that are used by the attached devices to gain the CPU's attention -- 700 often a source of trouble if two devices are mistakenly configured 701 to use the same IRQ). The program procinfo to display some 702 information about your system gathered from the /proc file system. 703 704 Before you can use the /proc file system, it has to be mounted, 705 meaning it has to be given a location in the directory hierarchy. 706 That location should be /proc. A command such as "mount -t proc proc 707 /proc" or the equivalent line in /etc/fstab does the job. 708 709 The /proc file system is explained in the file 710 <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage 711 ("man 5 proc"). 712 713 This option will enlarge your kernel by about 67 KB. Several 714 programs depend on this, so everyone should say Y here. 715 716config PROC_KCORE 717 bool "/proc/kcore support" if !ARM 718 depends on PROC_FS && MMU 719 720config SYSFS 721 bool "sysfs file system support" if EMBEDDED 722 default y 723 help 724 The sysfs filesystem is a virtual filesystem that the kernel uses to 725 export internal kernel objects, their attributes, and their 726 relationships to one another. 727 728 Users can use sysfs to ascertain useful information about the running 729 kernel, such as the devices the kernel has discovered on each bus and 730 which driver each is bound to. sysfs can also be used to tune devices 731 and other kernel subsystems. 732 733 Some system agents rely on the information in sysfs to operate. 734 /sbin/hotplug uses device and object attributes in sysfs to assist in 735 delegating policy decisions, like persistantly naming devices. 736 737 sysfs is currently used by the block subsystem to mount the root 738 partition. If sysfs is disabled you must specify the boot device on 739 the kernel boot command line via its major and minor numbers. For 740 example, "root=03:01" for /dev/hda1. 741 742 Designers of embedded systems may wish to say N here to conserve space. 743 744config DEVPTS_FS_XATTR 745 bool "/dev/pts Extended Attributes" 746 depends on UNIX98_PTYS 747 help 748 Extended attributes are name:value pairs associated with inodes by 749 the kernel or by users (see the attr(5) manual page, or visit 750 <http://acl.bestbits.at/> for details). 751 752 If unsure, say N. 753 754config DEVPTS_FS_SECURITY 755 bool "/dev/pts Security Labels" 756 depends on DEVPTS_FS_XATTR 757 help 758 Security labels support alternative access control models 759 implemented by security modules like SELinux. This option 760 enables an extended attribute handler for file security 761 labels in the /dev/pts filesystem. 762 763 If you are not using a security module that requires using 764 extended attributes for file security labels, say N. 765 766config TMPFS 767 bool "Virtual memory file system support (former shm fs)" 768 help 769 Tmpfs is a file system which keeps all files in virtual memory. 770 771 Everything in tmpfs is temporary in the sense that no files will be 772 created on your hard drive. The files live in memory and swap 773 space. If you unmount a tmpfs instance, everything stored therein is 774 lost. 775 776 See <file:Documentation/filesystems/tmpfs.txt> for details. 777 778config TMPFS_XATTR 779 bool "tmpfs Extended Attributes" 780 depends on TMPFS 781 help 782 Extended attributes are name:value pairs associated with inodes by 783 the kernel or by users (see the attr(5) manual page, or visit 784 <http://acl.bestbits.at/> for details). 785 786 If unsure, say N. 787 788config TMPFS_SECURITY 789 bool "tmpfs Security Labels" 790 depends on TMPFS_XATTR 791 help 792 Security labels support alternative access control models 793 implemented by security modules like SELinux. This option 794 enables an extended attribute handler for file security 795 labels in the tmpfs filesystem. 796 If you are not using a security module that requires using 797 extended attributes for file security labels, say N. 798 799config HUGETLBFS 800 bool "HugeTLB file system support" 801 depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN 802 803config HUGETLB_PAGE 804 def_bool HUGETLBFS 805 806config RAMFS 807 bool 808 default y 809 ---help--- 810 Ramfs is a file system which keeps all files in RAM. It allows 811 read and write access. 812 813 It is more of an programming example than a useable file system. If 814 you need a file system which lives in RAM with limit checking use 815 tmpfs. 816 817 To compile this as a module, choose M here: the module will be called 818 ramfs. 819 820endmenu 821 822menu "Miscellaneous filesystems" 823 824config ADFS_FS 825 tristate "ADFS file system support (EXPERIMENTAL)" 826 depends on EXPERIMENTAL 827 help 828 The Acorn Disc Filing System is the standard file system of the 829 RiscOS operating system which runs on Acorn's ARM-based Risc PC 830 systems and the Acorn Archimedes range of machines. If you say Y 831 here, Linux will be able to read from ADFS partitions on hard drives 832 and from ADFS-formatted floppy discs. If you also want to be able to 833 write to those devices, say Y to "ADFS write support" below. 834 835 The ADFS partition should be the first partition (i.e., 836 /dev/[hs]d?1) on each of your drives. Please read the file 837 <file:Documentation/filesystems/adfs.txt> for further details. 838 839 To compile this code as a module, choose M here: the module will be 840 called adfs. 841 842 If unsure, say N. 843 844config ADFS_FS_RW 845 bool "ADFS write support (DANGEROUS)" 846 depends on ADFS_FS 847 help 848 If you say Y here, you will be able to write to ADFS partitions on 849 hard drives and ADFS-formatted floppy disks. This is experimental 850 codes, so if you're unsure, say N. 851 852config AFFS_FS 853 tristate "Amiga FFS file system support (EXPERIMENTAL)" 854 depends on EXPERIMENTAL 855 help 856 The Fast File System (FFS) is the common file system used on hard 857 disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y 858 if you want to be able to read and write files from and to an Amiga 859 FFS partition on your hard drive. Amiga floppies however cannot be 860 read with this driver due to an incompatibility of the floppy 861 controller used in an Amiga and the standard floppy controller in 862 PCs and workstations. Read <file:Documentation/filesystems/affs.txt> 863 and <file:fs/affs/Changes>. 864 865 With this driver you can also mount disk files used by Bernd 866 Schmidt's Un*X Amiga Emulator 867 (<http://www.freiburg.linux.de/~uae/>). 868 If you want to do this, you will also need to say Y or M to "Loop 869 device support", above. 870 871 To compile this file system support as a module, choose M here: the 872 module will be called affs. If unsure, say N. 873 874config HFS_FS 875 tristate "Apple Macintosh file system support (EXPERIMENTAL)" 876 depends on EXPERIMENTAL 877 help 878 If you say Y here, you will be able to mount Macintosh-formatted 879 floppy disks and hard drive partitions with full read-write access. 880 Please read <file:fs/hfs/HFS.txt> to learn about the available mount 881 options. 882 883 To compile this file system support as a module, choose M here: the 884 module will be called hfs. 885 886config HFSPLUS_FS 887 tristate "Apple Extended HFS file system support" 888 select NLS 889 select NLS_UTF8 890 help 891 If you say Y here, you will be able to mount extended format 892 Macintosh-formatted hard drive partitions with full read-write access. 893 894 This file system is often called HFS+ and was introduced with 895 MacOS 8. It includes all Mac specific filesystem data such as 896 data forks and creator codes, but it also has several UNIX 897 style features such as file ownership and permissions. 898 899config BEFS_FS 900 tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" 901 depends on EXPERIMENTAL 902 select NLS 903 help 904 The BeOS File System (BeFS) is the native file system of Be, Inc's 905 BeOS. Notable features include support for arbitrary attributes 906 on files and directories, and database-like indeces on selected 907 attributes. (Also note that this driver doesn't make those features 908 available at this time). It is a 64 bit filesystem, so it supports 909 extremly large volumes and files. 910 911 If you use this filesystem, you should also say Y to at least one 912 of the NLS (native language support) options below. 913 914 If you don't know what this is about, say N. 915 916 To compile this as a module, choose M here: the module will be 917 called befs. 918 919config BEFS_DEBUG 920 bool "Debug BeFS" 921 depends on BEFS_FS 922 help 923 If you say Y here, you can use the 'debug' mount option to enable 924 debugging output from the driver. 925 926config BFS_FS 927 tristate "BFS file system support (EXPERIMENTAL)" 928 depends on EXPERIMENTAL 929 help 930 Boot File System (BFS) is a file system used under SCO UnixWare to 931 allow the bootloader access to the kernel image and other important 932 files during the boot process. It is usually mounted under /stand 933 and corresponds to the slice marked as "STAND" in the UnixWare 934 partition. You should say Y if you want to read or write the files 935 on your /stand slice from within Linux. You then also need to say Y 936 to "UnixWare slices support", below. More information about the BFS 937 file system is contained in the file 938 <file:Documentation/filesystems/bfs.txt>. 939 940 If you don't know what this is about, say N. 941 942 To compile this as a module, choose M here: the module will be called 943 bfs. Note that the file system of your root partition (the one 944 containing the directory /) cannot be compiled as a module. 945 946 947 948config EFS_FS 949 tristate "EFS file system support (read only) (EXPERIMENTAL)" 950 depends on EXPERIMENTAL 951 help 952 EFS is an older file system used for non-ISO9660 CD-ROMs and hard 953 disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer 954 uses the XFS file system for hard disk partitions however). 955 956 This implementation only offers read-only access. If you don't know 957 what all this is about, it's safe to say N. For more information 958 about EFS see its home page at <http://aeschi.ch.eu.org/efs/>. 959 960 To compile the EFS file system support as a module, choose M here: the 961 module will be called efs. 962 963config JFFS_FS 964 tristate "Journalling Flash File System (JFFS) support" 965 depends on MTD 966 help 967 JFFS is the Journaling Flash File System developed by Axis 968 Communications in Sweden, aimed at providing a crash/powerdown-safe 969 file system for disk-less embedded devices. Further information is 970 available at (<http://developer.axis.com/software/jffs/>). 971 972config JFFS_FS_VERBOSE 973 int "JFFS debugging verbosity (0 = quiet, 3 = noisy)" 974 depends on JFFS_FS 975 default "0" 976 help 977 Determines the verbosity level of the JFFS debugging messages. 978 979config JFFS_PROC_FS 980 bool "JFFS stats available in /proc filesystem" 981 depends on JFFS_FS && PROC_FS 982 help 983 Enabling this option will cause statistics from mounted JFFS file systems 984 to be made available to the user in the /proc/fs/jffs/ directory. 985 986config JFFS2_FS 987 tristate "Journalling Flash File System v2 (JFFS2) support" 988 select CRC32 989 depends on MTD 990 help 991 JFFS2 is the second generation of the Journalling Flash File System 992 for use on diskless embedded devices. It provides improved wear 993 levelling, compression and support for hard links. You cannot use 994 this on normal block devices, only on 'MTD' devices. 995 996 Further information on the design and implementation of JFFS2 is 997 available at <http://sources.redhat.com/jffs2/>. 998 999config JFFS2_FS_DEBUG 1000 int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" 1001 depends on JFFS2_FS 1002 default "0" 1003 help 1004 This controls the amount of debugging messages produced by the JFFS2 1005 code. Set it to zero for use in production systems. For evaluation, 1006 testing and debugging, it's advisable to set it to one. This will 1007 enable a few assertions and will print debugging messages at the 1008 KERN_DEBUG loglevel, where they won't normally be visible. Level 2 1009 is unlikely to be useful - it enables extra debugging in certain 1010 areas which at one point needed debugging, but when the bugs were 1011 located and fixed, the detailed messages were relegated to level 2. 1012 1013 If reporting bugs, please try to have available a full dump of the 1014 messages at debug level 1 while the misbehaviour was occurring. 1015 1016config JFFS2_FS_NAND 1017 bool "JFFS2 support for NAND flash" 1018 depends on JFFS2_FS 1019 default n 1020 help 1021 This enables the support for NAND flash in JFFS2. NAND is a newer 1022 type of flash chip design than the traditional NOR flash, with 1023 higher density but a handful of characteristics which make it more 1024 interesting for the file system to use. 1025 1026 Say 'N' unless you have NAND flash. 1027 1028config JFFS2_FS_NOR_ECC 1029 bool "JFFS2 support for ECC'd NOR flash (EXPERIMENTAL)" 1030 depends on JFFS2_FS && EXPERIMENTAL 1031 default n 1032 help 1033 This enables the experimental support for NOR flash with transparent 1034 ECC for JFFS2. This type of flash chip is not common, however it is 1035 available from ST Microelectronics. 1036 1037config JFFS2_COMPRESSION_OPTIONS 1038 bool "Advanced compression options for JFFS2" 1039 depends on JFFS2_FS 1040 default n 1041 help 1042 Enabling this option allows you to explicitly choose which 1043 compression modules, if any, are enabled in JFFS2. Removing 1044 compressors and mean you cannot read existing file systems, 1045 and enabling experimental compressors can mean that you 1046 write a file system which cannot be read by a standard kernel. 1047 1048 If unsure, you should _definitely_ say 'N'. 1049 1050config JFFS2_ZLIB 1051 bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS 1052 select ZLIB_INFLATE 1053 select ZLIB_DEFLATE 1054 depends on JFFS2_FS 1055 default y 1056 help 1057 Zlib is designed to be a free, general-purpose, legally unencumbered, 1058 lossless data-compression library for use on virtually any computer 1059 hardware and operating system. See <http://www.gzip.org/zlib/> for 1060 further information. 1061 1062 Say 'Y' if unsure. 1063 1064config JFFS2_RTIME 1065 bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS 1066 depends on JFFS2_FS 1067 default y 1068 help 1069 Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. 1070 1071config JFFS2_RUBIN 1072 bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS 1073 depends on JFFS2_FS 1074 default n 1075 help 1076 RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. 1077 1078choice 1079 prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS 1080 default JFFS2_CMODE_PRIORITY 1081 depends on JFFS2_FS 1082 help 1083 You can set here the default compression mode of JFFS2 from 1084 the available compression modes. Don't touch if unsure. 1085 1086config JFFS2_CMODE_NONE 1087 bool "no compression" 1088 help 1089 Uses no compression. 1090 1091config JFFS2_CMODE_PRIORITY 1092 bool "priority" 1093 help 1094 Tries the compressors in a predefinied order and chooses the first 1095 successful one. 1096 1097config JFFS2_CMODE_SIZE 1098 bool "size (EXPERIMENTAL)" 1099 help 1100 Tries all compressors and chooses the one which has the smallest 1101 result. 1102 1103endchoice 1104 1105config CRAMFS 1106 tristate "Compressed ROM file system support (cramfs)" 1107 select ZLIB_INFLATE 1108 help 1109 Saying Y here includes support for CramFs (Compressed ROM File 1110 System). CramFs is designed to be a simple, small, and compressed 1111 file system for ROM based embedded systems. CramFs is read-only, 1112 limited to 256MB file systems (with 16MB files), and doesn't support 1113 16/32 bits uid/gid, hard links and timestamps. 1114 1115 See <file:Documentation/filesystems/cramfs.txt> and 1116 <file:fs/cramfs/README> for further information. 1117 1118 To compile this as a module, choose M here: the module will be called 1119 cramfs. Note that the root file system (the one containing the 1120 directory /) cannot be compiled as a module. 1121 1122 If unsure, say N. 1123 1124config VXFS_FS 1125 tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" 1126 help 1127 FreeVxFS is a file system driver that support the VERITAS VxFS(TM) 1128 file system format. VERITAS VxFS(TM) is the standard file system 1129 of SCO UnixWare (and possibly others) and optionally available 1130 for Sunsoft Solaris, HP-UX and many other operating systems. 1131 Currently only readonly access is supported. 1132 1133 NOTE: the file system type as used by mount(1), mount(2) and 1134 fstab(5) is 'vxfs' as it describes the file system format, not 1135 the actual driver. 1136 1137 To compile this as a module, choose M here: the module will be 1138 called freevxfs. If unsure, say N. 1139 1140 1141config HPFS_FS 1142 tristate "OS/2 HPFS file system support" 1143 help 1144 OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS 1145 is the file system used for organizing files on OS/2 hard disk 1146 partitions. Say Y if you want to be able to read files from and 1147 write files to an OS/2 HPFS partition on your hard drive. OS/2 1148 floppies however are in regular MSDOS format, so you don't need this 1149 option in order to be able to read them. Read 1150 <file:Documentation/filesystems/hpfs.txt>. 1151 1152 To compile this file system support as a module, choose M here: the 1153 module will be called hpfs. If unsure, say N. 1154 1155 1156 1157config QNX4FS_FS 1158 tristate "QNX4 file system support (read only)" 1159 help 1160 This is the file system used by the real-time operating systems 1161 QNX 4 and QNX 6 (the latter is also called QNX RTP). 1162 Further information is available at <http://www.qnx.com/>. 1163 Say Y if you intend to mount QNX hard disks or floppies. 1164 Unless you say Y to "QNX4FS read-write support" below, you will 1165 only be able to read these file systems. 1166 1167 To compile this file system support as a module, choose M here: the 1168 module will be called qnx4. 1169 1170 If you don't know whether you need it, then you don't need it: 1171 answer N. 1172 1173config QNX4FS_RW 1174 bool "QNX4FS write support (DANGEROUS)" 1175 depends on QNX4FS_FS && EXPERIMENTAL && BROKEN 1176 help 1177 Say Y if you want to test write support for QNX4 file systems. 1178 1179 It's currently broken, so for now: 1180 answer N. 1181 1182 1183 1184config SYSV_FS 1185 tristate "System V/Xenix/V7/Coherent file system support" 1186 help 1187 SCO, Xenix and Coherent are commercial Unix systems for Intel 1188 machines, and Version 7 was used on the DEC PDP-11. Saying Y 1189 here would allow you to read from their floppies and hard disk 1190 partitions. 1191 1192 If you have floppies or hard disk partitions like that, it is likely 1193 that they contain binaries from those other Unix systems; in order 1194 to run these binaries, you will want to install linux-abi which is a 1195 a set of kernel modules that lets you run SCO, Xenix, Wyse, 1196 UnixWare, Dell Unix and System V programs under Linux. It is 1197 available via FTP (user: ftp) from 1198 <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>). 1199 NOTE: that will work only for binaries from Intel-based systems; 1200 PDP ones will have to wait until somebody ports Linux to -11 ;-) 1201 1202 If you only intend to mount files from some other Unix over the 1203 network using NFS, you don't need the System V file system support 1204 (but you need NFS file system support obviously). 1205 1206 Note that this option is generally not needed for floppies, since a 1207 good portable way to transport files and directories between unixes 1208 (and even other operating systems) is given by the tar program ("man 1209 tar" or preferably "info tar"). Note also that this option has 1210 nothing whatsoever to do with the option "System V IPC". Read about 1211 the System V file system in 1212 <file:Documentation/filesystems/sysv-fs.txt>. 1213 Saying Y here will enlarge your kernel by about 27 KB. 1214 1215 To compile this as a module, choose M here: the module will be called 1216 sysv. 1217 1218 If you haven't heard about all of this before, it's safe to say N. 1219 1220 1221 1222config UFS_FS 1223 tristate "UFS file system support (read only)" 1224 help 1225 BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, 1226 OpenBSD and NeXTstep) use a file system called UFS. Some System V 1227 Unixes can create and mount hard disk partitions and diskettes using 1228 this file system as well. Saying Y here will allow you to read from 1229 these partitions; if you also want to write to them, say Y to the 1230 experimental "UFS file system write support", below. Please read the 1231 file <file:Documentation/filesystems/ufs.txt> for more information. 1232 1233 The recently released UFS2 variant (used in FreeBSD 5.x) is 1234 READ-ONLY supported. 1235 1236 If you only intend to mount files from some other Unix over the 1237 network using NFS, you don't need the UFS file system support (but 1238 you need NFS file system support obviously). 1239 1240 Note that this option is generally not needed for floppies, since a 1241 good portable way to transport files and directories between unixes 1242 (and even other operating systems) is given by the tar program ("man 1243 tar" or preferably "info tar"). 1244 1245 When accessing NeXTstep files, you may need to convert them from the 1246 NeXT character set to the Latin1 character set; use the program 1247 recode ("info recode") for this purpose. 1248 1249 To compile the UFS file system support as a module, choose M here: the 1250 module will be called ufs. 1251 1252 If you haven't heard about all of this before, it's safe to say N. 1253 1254config UFS_FS_WRITE 1255 bool "UFS file system write support (DANGEROUS)" 1256 depends on UFS_FS && EXPERIMENTAL 1257 help 1258 Say Y here if you want to try writing to UFS partitions. This is 1259 experimental, so you should back up your UFS partitions beforehand. 1260 1261endmenu 1262 1263menu "Network File Systems" 1264 depends on NET 1265 1266config NFS_FS 1267 tristate "NFS file system support" 1268 depends on INET 1269 select LOCKD 1270 select SUNRPC 1271 help 1272 If you are connected to some other (usually local) Unix computer 1273 (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing 1274 on that computer (the NFS server) using the Network File Sharing 1275 protocol, say Y. "Mounting files" means that the client can access 1276 the files with usual UNIX commands as if they were sitting on the 1277 client's hard disk. For this to work, the server must run the 1278 programs nfsd and mountd (but does not need to have NFS file system 1279 support enabled in its kernel). NFS is explained in the Network 1280 Administrator's Guide, available from 1281 <http://www.tldp.org/docs.html#guide>, on its man page: "man 1282 nfs", and in the NFS-HOWTO. 1283 1284 A superior but less widely used alternative to NFS is provided by 1285 the Coda file system; see "Coda file system support" below. 1286 1287 If you say Y here, you should have said Y to TCP/IP networking also. 1288 This option would enlarge your kernel by about 27 KB. 1289 1290 To compile this file system support as a module, choose M here: the 1291 module will be called nfs. 1292 1293 If you are configuring a diskless machine which will mount its root 1294 file system over NFS at boot time, say Y here and to "Kernel 1295 level IP autoconfiguration" above and to "Root file system on NFS" 1296 below. You cannot compile this driver as a module in this case. 1297 There are two packages designed for booting diskless machines over 1298 the net: netboot, available from 1299 <http://ftp1.sourceforge.net/netboot/>, and Etherboot, 1300 available from <http://ftp1.sourceforge.net/etherboot/>. 1301 1302 If you don't know what all this is about, say N. 1303 1304config NFS_V3 1305 bool "Provide NFSv3 client support" 1306 depends on NFS_FS 1307 help 1308 Say Y here if you want your NFS client to be able to speak version 1309 3 of the NFS protocol. 1310 1311 If unsure, say Y. 1312 1313config NFS_V4 1314 bool "Provide NFSv4 client support (EXPERIMENTAL)" 1315 depends on NFS_FS && EXPERIMENTAL 1316 select RPCSEC_GSS_KRB5 1317 help 1318 Say Y here if you want your NFS client to be able to speak the newer 1319 version 4 of the NFS protocol. 1320 1321 Note: Requires auxiliary userspace daemons which may be found on 1322 http://www.citi.umich.edu/projects/nfsv4/ 1323 1324 If unsure, say N. 1325 1326config NFS_DIRECTIO 1327 bool "Allow direct I/O on NFS files (EXPERIMENTAL)" 1328 depends on NFS_FS && EXPERIMENTAL 1329 help 1330 This option enables applications to perform uncached I/O on files 1331 in NFS file systems using the O_DIRECT open() flag. When O_DIRECT 1332 is set for a file, its data is not cached in the system's page 1333 cache. Data is moved to and from user-level application buffers 1334 directly. Unlike local disk-based file systems, NFS O_DIRECT has 1335 no alignment restrictions. 1336 1337 Unless your program is designed to use O_DIRECT properly, you are 1338 much better off allowing the NFS client to manage data caching for 1339 you. Misusing O_DIRECT can cause poor server performance or network 1340 storms. This kernel build option defaults OFF to avoid exposing 1341 system administrators unwittingly to a potentially hazardous 1342 feature. 1343 1344 For more details on NFS O_DIRECT, see fs/nfs/direct.c. 1345 1346 If unsure, say N. This reduces the size of the NFS client, and 1347 causes open() to return EINVAL if a file residing in NFS is 1348 opened with the O_DIRECT flag. 1349 1350config NFSD 1351 tristate "NFS server support" 1352 depends on INET 1353 select LOCKD 1354 select SUNRPC 1355 select EXPORTFS 1356 help 1357 If you want your Linux box to act as an NFS *server*, so that other 1358 computers on your local network which support NFS can access certain 1359 directories on your box transparently, you have two options: you can 1360 use the self-contained user space program nfsd, in which case you 1361 should say N here, or you can say Y and use the kernel based NFS 1362 server. The advantage of the kernel based solution is that it is 1363 faster. 1364 1365 In either case, you will need support software; the respective 1366 locations are given in the file <file:Documentation/Changes> in the 1367 NFS section. 1368 1369 If you say Y here, you will get support for version 2 of the NFS 1370 protocol (NFSv2). If you also want NFSv3, say Y to the next question 1371 as well. 1372 1373 Please read the NFS-HOWTO, available from 1374 <http://www.tldp.org/docs.html#howto>. 1375 1376 To compile the NFS server support as a module, choose M here: the 1377 module will be called nfsd. If unsure, say N. 1378 1379config NFSD_V3 1380 bool "Provide NFSv3 server support" 1381 depends on NFSD 1382 help 1383 If you would like to include the NFSv3 server as well as the NFSv2 1384 server, say Y here. If unsure, say Y. 1385 1386config NFSD_V4 1387 bool "Provide NFSv4 server support (EXPERIMENTAL)" 1388 depends on NFSD_V3 && EXPERIMENTAL 1389 select NFSD_TCP 1390 help 1391 If you would like to include the NFSv4 server as well as the NFSv2 1392 and NFSv3 servers, say Y here. This feature is experimental, and 1393 should only be used if you are interested in helping to test NFSv4. 1394 If unsure, say N. 1395 1396config NFSD_TCP 1397 bool "Provide NFS server over TCP support" 1398 depends on NFSD 1399 default y 1400 help 1401 If you want your NFS server to support TCP connections, say Y here. 1402 TCP connections usually perform better than the default UDP when 1403 the network is lossy or congested. If unsure, say Y. 1404 1405config ROOT_NFS 1406 bool "Root file system on NFS" 1407 depends on NFS_FS=y && IP_PNP 1408 help 1409 If you want your Linux box to mount its whole root file system (the 1410 one containing the directory /) from some other computer over the 1411 net via NFS (presumably because your box doesn't have a hard disk), 1412 say Y. Read <file:Documentation/nfsroot.txt> for details. It is 1413 likely that in this case, you also want to say Y to "Kernel level IP 1414 autoconfiguration" so that your box can discover its network address 1415 at boot time. 1416 1417 Most people say N here. 1418 1419config LOCKD 1420 tristate 1421 1422config LOCKD_V4 1423 bool 1424 depends on NFSD_V3 || NFS_V3 1425 default y 1426 1427config EXPORTFS 1428 tristate 1429 1430config SUNRPC 1431 tristate 1432 1433config SUNRPC_GSS 1434 tristate 1435 1436config RPCSEC_GSS_KRB5 1437 tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)" 1438 depends on SUNRPC && EXPERIMENTAL 1439 select SUNRPC_GSS 1440 select CRYPTO 1441 select CRYPTO_MD5 1442 select CRYPTO_DES 1443 help 1444 Provides for secure RPC calls by means of a gss-api 1445 mechanism based on Kerberos V5. This is required for 1446 NFSv4. 1447 1448 Note: Requires an auxiliary userspace daemon which may be found on 1449 http://www.citi.umich.edu/projects/nfsv4/ 1450 1451 If unsure, say N. 1452 1453config RPCSEC_GSS_SPKM3 1454 tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)" 1455 depends on SUNRPC && EXPERIMENTAL 1456 select SUNRPC_GSS 1457 select CRYPTO 1458 select CRYPTO_MD5 1459 select CRYPTO_DES 1460 help 1461 Provides for secure RPC calls by means of a gss-api 1462 mechanism based on the SPKM3 public-key mechanism. 1463 1464 Note: Requires an auxiliary userspace daemon which may be found on 1465 http://www.citi.umich.edu/projects/nfsv4/ 1466 1467 If unsure, say N. 1468 1469config SMB_FS 1470 tristate "SMB file system support (to mount Windows shares etc.)" 1471 depends on INET 1472 select NLS 1473 help 1474 SMB (Server Message Block) is the protocol Windows for Workgroups 1475 (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share 1476 files and printers over local networks. Saying Y here allows you to 1477 mount their file systems (often called "shares" in this context) and 1478 access them just like any other Unix directory. Currently, this 1479 works only if the Windows machines use TCP/IP as the underlying 1480 transport protocol, and not NetBEUI. For details, read 1481 <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO, 1482 available from <http://www.tldp.org/docs.html#howto>. 1483 1484 Note: if you just want your box to act as an SMB *server* and make 1485 files and printing services available to Windows clients (which need 1486 to have a TCP/IP stack), you don't need to say Y here; you can use 1487 the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>) 1488 for that. 1489 1490 General information about how to connect Linux, Windows machines and 1491 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. 1492 1493 To compile the SMB support as a module, choose M here: the module will 1494 be called smbfs. Most people say N, however. 1495 1496config SMB_NLS_DEFAULT 1497 bool "Use a default NLS" 1498 depends on SMB_FS 1499 help 1500 Enabling this will make smbfs use nls translations by default. You 1501 need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls 1502 settings and you need to give the default nls for the SMB server as 1503 CONFIG_SMB_NLS_REMOTE. 1504 1505 The nls settings can be changed at mount time, if your smbmount 1506 supports that, using the codepage and iocharset parameters. 1507 1508 smbmount from samba 2.2.0 or later supports this. 1509 1510config SMB_NLS_REMOTE 1511 string "Default Remote NLS Option" 1512 depends on SMB_NLS_DEFAULT 1513 default "cp437" 1514 help 1515 This setting allows you to specify a default value for which 1516 codepage the server uses. If this field is left blank no 1517 translations will be done by default. The local codepage/charset 1518 default to CONFIG_NLS_DEFAULT. 1519 1520 The nls settings can be changed at mount time, if your smbmount 1521 supports that, using the codepage and iocharset parameters. 1522 1523 smbmount from samba 2.2.0 or later supports this. 1524 1525config CIFS 1526 tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)" 1527 depends on INET 1528 select NLS 1529 help 1530 This is the client VFS module for the Common Internet File System 1531 (CIFS) protocol which is the successor to the Server Message Block 1532 (SMB) protocol, the native file sharing mechanism for most early 1533 PC operating systems. The CIFS protocol is fully supported by 1534 file servers such as Windows 2000 (including Windows 2003, NT 4 1535 and Windows XP) as well by Samba (which provides excellent CIFS 1536 server support for Linux and many other operating systems). Currently 1537 you must use the smbfs client filesystem to access older SMB servers 1538 such as Windows 9x and OS/2. 1539 1540 The intent of the cifs module is to provide an advanced 1541 network file system client for mounting to CIFS compliant servers, 1542 including support for dfs (hierarchical name space), secure per-user 1543 session establishment, safe distributed caching (oplock), optional 1544 packet signing, Unicode and other internationalization improvements, 1545 and optional Winbind (nsswitch) integration. You do not need to enable 1546 cifs if running only a (Samba) server. It is possible to enable both 1547 smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003 1548 and Samba 3 servers, and smbfs for accessing old servers). If you need 1549 to mount to Samba or Windows 2003 servers from this machine, say Y. 1550 1551config CIFS_STATS 1552 bool "CIFS statistics" 1553 depends on CIFS 1554 help 1555 Enabling this option will cause statistics for each server share 1556 mounted by the cifs client to be displayed in /proc/fs/cifs/Stats 1557 1558config CIFS_XATTR 1559 bool "CIFS extended attributes (EXPERIMENTAL)" 1560 depends on CIFS 1561 help 1562 Extended attributes are name:value pairs associated with inodes by 1563 the kernel or by users (see the attr(5) manual page, or visit 1564 <http://acl.bestbits.at/> for details). CIFS maps the name of 1565 extended attributes beginning with the user namespace prefix 1566 to SMB/CIFS EAs. EAs are stored on Windows servers without the 1567 user namespace prefix, but their names are seen by Linux cifs clients 1568 prefaced by the user namespace prefix. The system namespace 1569 (used by some filesystems to store ACLs) is not supported at 1570 this time. 1571 1572 If unsure, say N. 1573 1574config CIFS_POSIX 1575 bool "CIFS POSIX Extensions (EXPERIMENTAL)" 1576 depends on CIFS_XATTR 1577 help 1578 Enabling this option will cause the cifs client to attempt to 1579 negotiate a newer dialect with servers, such as Samba 3.0.5 1580 or later, that optionally can handle more POSIX like (rather 1581 than Windows like) file behavior. It also enables 1582 support for POSIX ACLs (getfacl and setfacl) to servers 1583 (such as Samba 3.10 and later) which can negotiate 1584 CIFS POSIX ACL support. If unsure, say N. 1585 1586config CIFS_EXPERIMENTAL 1587 bool "CIFS Experimental Features (EXPERIMENTAL)" 1588 depends on CIFS 1589 help 1590 Enables cifs features under testing. These features 1591 are highly experimental. If unsure, say N. 1592 1593config NCP_FS 1594 tristate "NCP file system support (to mount NetWare volumes)" 1595 depends on IPX!=n || INET 1596 help 1597 NCP (NetWare Core Protocol) is a protocol that runs over IPX and is 1598 used by Novell NetWare clients to talk to file servers. It is to 1599 IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you 1600 to mount NetWare file server volumes and to access them just like 1601 any other Unix directory. For details, please read the file 1602 <file:Documentation/filesystems/ncpfs.txt> in the kernel source and 1603 the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>. 1604 1605 You do not have to say Y here if you want your Linux box to act as a 1606 file *server* for Novell NetWare clients. 1607 1608 General information about how to connect Linux, Windows machines and 1609 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. 1610 1611 To compile this as a module, choose M here: the module will be called 1612 ncpfs. Say N unless you are connected to a Novell network. 1613 1614source "fs/ncpfs/Kconfig" 1615 1616config CODA_FS 1617 tristate "Coda file system support (advanced network fs)" 1618 depends on INET 1619 help 1620 Coda is an advanced network file system, similar to NFS in that it 1621 enables you to mount file systems of a remote server and access them 1622 with regular Unix commands as if they were sitting on your hard 1623 disk. Coda has several advantages over NFS: support for 1624 disconnected operation (e.g. for laptops), read/write server 1625 replication, security model for authentication and encryption, 1626 persistent client caches and write back caching. 1627 1628 If you say Y here, your Linux box will be able to act as a Coda 1629 *client*. You will need user level code as well, both for the 1630 client and server. Servers are currently user level, i.e. they need 1631 no kernel support. Please read 1632 <file:Documentation/filesystems/coda.txt> and check out the Coda 1633 home page <http://www.coda.cs.cmu.edu/>. 1634 1635 To compile the coda client support as a module, choose M here: the 1636 module will be called coda. 1637 1638config CODA_FS_OLD_API 1639 bool "Use 96-bit Coda file identifiers" 1640 depends on CODA_FS 1641 help 1642 A new kernel-userspace API had to be introduced for Coda v6.0 1643 to support larger 128-bit file identifiers as needed by the 1644 new realms implementation. 1645 1646 However this new API is not backward compatible with older 1647 clients. If you really need to run the old Coda userspace 1648 cache manager then say Y. 1649 1650 For most cases you probably want to say N. 1651 1652config AFS_FS 1653# for fs/nls/Config.in 1654 tristate "Andrew File System support (AFS) (Experimental)" 1655 depends on INET && EXPERIMENTAL 1656 select RXRPC 1657 help 1658 If you say Y here, you will get an experimental Andrew File System 1659 driver. It currently only supports unsecured read-only AFS access. 1660 1661 See <file:Documentation/filesystems/afs.txt> for more intormation. 1662 1663 If unsure, say N. 1664 1665config RXRPC 1666 tristate 1667 1668endmenu 1669 1670menu "Partition Types" 1671 1672source "fs/partitions/Kconfig" 1673 1674endmenu 1675 1676source "fs/nls/Kconfig" 1677 1678endmenu 1679 1680