xref: /linux/drivers/pci/ats.c (revision bfb921b2a9d5d1123d1d10b196a39db629ddef87)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PCI Express I/O Virtualization (IOV) support
4  *   Address Translation Service 1.0
5  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
6  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
7  *
8  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
9  * Copyright (C) 2011 Advanced Micro Devices,
10  */
11 
12 #include <linux/bitfield.h>
13 #include <linux/export.h>
14 #include <linux/pci-ats.h>
15 #include <linux/pci.h>
16 #include <linux/slab.h>
17 
18 #include "pci.h"
19 
20 void pci_ats_init(struct pci_dev *dev)
21 {
22 	int pos;
23 
24 	if (pci_ats_disabled())
25 		return;
26 
27 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
28 	if (!pos)
29 		return;
30 
31 	dev->ats_cap = pos;
32 }
33 
34 /**
35  * pci_ats_supported - check if the device can use ATS
36  * @dev: the PCI device
37  *
38  * Returns true if the device supports ATS and is allowed to use it, false
39  * otherwise.
40  */
41 bool pci_ats_supported(struct pci_dev *dev)
42 {
43 	if (!dev->ats_cap)
44 		return false;
45 
46 	return (dev->untrusted == 0);
47 }
48 EXPORT_SYMBOL_GPL(pci_ats_supported);
49 
50 /**
51  * pci_enable_ats - enable the ATS capability
52  * @dev: the PCI device
53  * @ps: the IOMMU page shift
54  *
55  * Returns 0 on success, or negative on failure.
56  */
57 int pci_enable_ats(struct pci_dev *dev, int ps)
58 {
59 	u16 ctrl;
60 	struct pci_dev *pdev;
61 
62 	if (!pci_ats_supported(dev))
63 		return -EINVAL;
64 
65 	if (WARN_ON(dev->ats_enabled))
66 		return -EBUSY;
67 
68 	if (ps < PCI_ATS_MIN_STU)
69 		return -EINVAL;
70 
71 	/*
72 	 * Note that enabling ATS on a VF fails unless it's already enabled
73 	 * with the same STU on the PF.
74 	 */
75 	ctrl = PCI_ATS_CTRL_ENABLE;
76 	if (dev->is_virtfn) {
77 		pdev = pci_physfn(dev);
78 		if (pdev->ats_stu != ps)
79 			return -EINVAL;
80 	} else {
81 		dev->ats_stu = ps;
82 		ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
83 	}
84 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
85 
86 	dev->ats_enabled = 1;
87 	return 0;
88 }
89 EXPORT_SYMBOL_GPL(pci_enable_ats);
90 
91 /**
92  * pci_disable_ats - disable the ATS capability
93  * @dev: the PCI device
94  */
95 void pci_disable_ats(struct pci_dev *dev)
96 {
97 	u16 ctrl;
98 
99 	if (WARN_ON(!dev->ats_enabled))
100 		return;
101 
102 	pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
103 	ctrl &= ~PCI_ATS_CTRL_ENABLE;
104 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
105 
106 	dev->ats_enabled = 0;
107 }
108 EXPORT_SYMBOL_GPL(pci_disable_ats);
109 
110 void pci_restore_ats_state(struct pci_dev *dev)
111 {
112 	u16 ctrl;
113 
114 	if (!dev->ats_enabled)
115 		return;
116 
117 	ctrl = PCI_ATS_CTRL_ENABLE;
118 	if (!dev->is_virtfn)
119 		ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
120 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
121 }
122 
123 /**
124  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
125  * @dev: the PCI device
126  *
127  * Returns the queue depth on success, or negative on failure.
128  *
129  * The ATS spec uses 0 in the Invalidate Queue Depth field to
130  * indicate that the function can accept 32 Invalidate Request.
131  * But here we use the `real' values (i.e. 1~32) for the Queue
132  * Depth; and 0 indicates the function shares the Queue with
133  * other functions (doesn't exclusively own a Queue).
134  */
135 int pci_ats_queue_depth(struct pci_dev *dev)
136 {
137 	u16 cap;
138 
139 	if (!dev->ats_cap)
140 		return -EINVAL;
141 
142 	if (dev->is_virtfn)
143 		return 0;
144 
145 	pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
146 	return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
147 }
148 
149 /**
150  * pci_ats_page_aligned - Return Page Aligned Request bit status.
151  * @pdev: the PCI device
152  *
153  * Returns 1, if the Untranslated Addresses generated by the device
154  * are always aligned or 0 otherwise.
155  *
156  * Per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit
157  * is set, it indicates the Untranslated Addresses generated by the
158  * device are always aligned to a 4096 byte boundary.
159  */
160 int pci_ats_page_aligned(struct pci_dev *pdev)
161 {
162 	u16 cap;
163 
164 	if (!pdev->ats_cap)
165 		return 0;
166 
167 	pci_read_config_word(pdev, pdev->ats_cap + PCI_ATS_CAP, &cap);
168 
169 	if (cap & PCI_ATS_CAP_PAGE_ALIGNED)
170 		return 1;
171 
172 	return 0;
173 }
174 
175 #ifdef CONFIG_PCI_PRI
176 void pci_pri_init(struct pci_dev *pdev)
177 {
178 	u16 status;
179 
180 	pdev->pri_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
181 
182 	if (!pdev->pri_cap)
183 		return;
184 
185 	pci_read_config_word(pdev, pdev->pri_cap + PCI_PRI_STATUS, &status);
186 	if (status & PCI_PRI_STATUS_PASID)
187 		pdev->pasid_required = 1;
188 }
189 
190 /**
191  * pci_enable_pri - Enable PRI capability
192  * @pdev: PCI device structure
193  * @reqs: outstanding requests
194  *
195  * Returns 0 on success, negative value on error
196  */
197 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
198 {
199 	u16 control, status;
200 	u32 max_requests;
201 	int pri = pdev->pri_cap;
202 
203 	/*
204 	 * VFs must not implement the PRI Capability.  If their PF
205 	 * implements PRI, it is shared by the VFs, so if the PF PRI is
206 	 * enabled, it is also enabled for the VF.
207 	 */
208 	if (pdev->is_virtfn) {
209 		if (pci_physfn(pdev)->pri_enabled)
210 			return 0;
211 		return -EINVAL;
212 	}
213 
214 	if (WARN_ON(pdev->pri_enabled))
215 		return -EBUSY;
216 
217 	if (!pri)
218 		return -EINVAL;
219 
220 	pci_read_config_word(pdev, pri + PCI_PRI_STATUS, &status);
221 	if (!(status & PCI_PRI_STATUS_STOPPED))
222 		return -EBUSY;
223 
224 	pci_read_config_dword(pdev, pri + PCI_PRI_MAX_REQ, &max_requests);
225 	reqs = min(max_requests, reqs);
226 	pdev->pri_reqs_alloc = reqs;
227 	pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
228 
229 	control = PCI_PRI_CTRL_ENABLE;
230 	pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
231 
232 	pdev->pri_enabled = 1;
233 
234 	return 0;
235 }
236 
237 /**
238  * pci_disable_pri - Disable PRI capability
239  * @pdev: PCI device structure
240  *
241  * Only clears the enabled-bit, regardless of its former value
242  */
243 void pci_disable_pri(struct pci_dev *pdev)
244 {
245 	u16 control;
246 	int pri = pdev->pri_cap;
247 
248 	/* VFs share the PF PRI */
249 	if (pdev->is_virtfn)
250 		return;
251 
252 	if (WARN_ON(!pdev->pri_enabled))
253 		return;
254 
255 	if (!pri)
256 		return;
257 
258 	pci_read_config_word(pdev, pri + PCI_PRI_CTRL, &control);
259 	control &= ~PCI_PRI_CTRL_ENABLE;
260 	pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
261 
262 	pdev->pri_enabled = 0;
263 }
264 EXPORT_SYMBOL_GPL(pci_disable_pri);
265 
266 /**
267  * pci_restore_pri_state - Restore PRI
268  * @pdev: PCI device structure
269  */
270 void pci_restore_pri_state(struct pci_dev *pdev)
271 {
272 	u16 control = PCI_PRI_CTRL_ENABLE;
273 	u32 reqs = pdev->pri_reqs_alloc;
274 	int pri = pdev->pri_cap;
275 
276 	if (pdev->is_virtfn)
277 		return;
278 
279 	if (!pdev->pri_enabled)
280 		return;
281 
282 	if (!pri)
283 		return;
284 
285 	pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
286 	pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
287 }
288 
289 /**
290  * pci_reset_pri - Resets device's PRI state
291  * @pdev: PCI device structure
292  *
293  * The PRI capability must be disabled before this function is called.
294  * Returns 0 on success, negative value on error.
295  */
296 int pci_reset_pri(struct pci_dev *pdev)
297 {
298 	u16 control;
299 	int pri = pdev->pri_cap;
300 
301 	if (pdev->is_virtfn)
302 		return 0;
303 
304 	if (WARN_ON(pdev->pri_enabled))
305 		return -EBUSY;
306 
307 	if (!pri)
308 		return -EINVAL;
309 
310 	control = PCI_PRI_CTRL_RESET;
311 	pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
312 
313 	return 0;
314 }
315 
316 /**
317  * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
318  *				 status.
319  * @pdev: PCI device structure
320  *
321  * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
322  */
323 int pci_prg_resp_pasid_required(struct pci_dev *pdev)
324 {
325 	if (pdev->is_virtfn)
326 		pdev = pci_physfn(pdev);
327 
328 	return pdev->pasid_required;
329 }
330 
331 /**
332  * pci_pri_supported - Check if PRI is supported.
333  * @pdev: PCI device structure
334  *
335  * Returns true if PRI capability is present, false otherwise.
336  */
337 bool pci_pri_supported(struct pci_dev *pdev)
338 {
339 	/* VFs share the PF PRI */
340 	if (pci_physfn(pdev)->pri_cap)
341 		return true;
342 	return false;
343 }
344 EXPORT_SYMBOL_GPL(pci_pri_supported);
345 #endif /* CONFIG_PCI_PRI */
346 
347 #ifdef CONFIG_PCI_PASID
348 void pci_pasid_init(struct pci_dev *pdev)
349 {
350 	pdev->pasid_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
351 }
352 
353 /**
354  * pci_enable_pasid - Enable the PASID capability
355  * @pdev: PCI device structure
356  * @features: Features to enable
357  *
358  * Returns 0 on success, negative value on error. This function checks
359  * whether the features are actually supported by the device and returns
360  * an error if not.
361  */
362 int pci_enable_pasid(struct pci_dev *pdev, int features)
363 {
364 	u16 control, supported;
365 	int pasid = pdev->pasid_cap;
366 
367 	/*
368 	 * VFs must not implement the PASID Capability, but if a PF
369 	 * supports PASID, its VFs share the PF PASID configuration.
370 	 */
371 	if (pdev->is_virtfn) {
372 		if (pci_physfn(pdev)->pasid_enabled)
373 			return 0;
374 		return -EINVAL;
375 	}
376 
377 	if (WARN_ON(pdev->pasid_enabled))
378 		return -EBUSY;
379 
380 	if (!pdev->eetlp_prefix_path && !pdev->pasid_no_tlp)
381 		return -EINVAL;
382 
383 	if (!pasid)
384 		return -EINVAL;
385 
386 	if (!pci_acs_path_enabled(pdev, NULL, PCI_ACS_RR | PCI_ACS_UF))
387 		return -EINVAL;
388 
389 	pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
390 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
391 
392 	/* User wants to enable anything unsupported? */
393 	if ((supported & features) != features)
394 		return -EINVAL;
395 
396 	control = PCI_PASID_CTRL_ENABLE | features;
397 	pdev->pasid_features = features;
398 
399 	pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
400 
401 	pdev->pasid_enabled = 1;
402 
403 	return 0;
404 }
405 EXPORT_SYMBOL_GPL(pci_enable_pasid);
406 
407 /**
408  * pci_disable_pasid - Disable the PASID capability
409  * @pdev: PCI device structure
410  */
411 void pci_disable_pasid(struct pci_dev *pdev)
412 {
413 	u16 control = 0;
414 	int pasid = pdev->pasid_cap;
415 
416 	/* VFs share the PF PASID configuration */
417 	if (pdev->is_virtfn)
418 		return;
419 
420 	if (WARN_ON(!pdev->pasid_enabled))
421 		return;
422 
423 	if (!pasid)
424 		return;
425 
426 	pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
427 
428 	pdev->pasid_enabled = 0;
429 }
430 EXPORT_SYMBOL_GPL(pci_disable_pasid);
431 
432 /**
433  * pci_restore_pasid_state - Restore PASID capabilities
434  * @pdev: PCI device structure
435  */
436 void pci_restore_pasid_state(struct pci_dev *pdev)
437 {
438 	u16 control;
439 	int pasid = pdev->pasid_cap;
440 
441 	if (pdev->is_virtfn)
442 		return;
443 
444 	if (!pdev->pasid_enabled)
445 		return;
446 
447 	if (!pasid)
448 		return;
449 
450 	control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
451 	pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
452 }
453 
454 /**
455  * pci_pasid_features - Check which PASID features are supported
456  * @pdev: PCI device structure
457  *
458  * Returns a negative value when no PASI capability is present.
459  * Otherwise is returns a bitmask with supported features. Current
460  * features reported are:
461  * PCI_PASID_CAP_EXEC - Execute permission supported
462  * PCI_PASID_CAP_PRIV - Privileged mode supported
463  */
464 int pci_pasid_features(struct pci_dev *pdev)
465 {
466 	u16 supported;
467 	int pasid;
468 
469 	if (pdev->is_virtfn)
470 		pdev = pci_physfn(pdev);
471 
472 	pasid = pdev->pasid_cap;
473 	if (!pasid)
474 		return -EINVAL;
475 
476 	pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
477 
478 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
479 
480 	return supported;
481 }
482 EXPORT_SYMBOL_GPL(pci_pasid_features);
483 
484 /**
485  * pci_max_pasids - Get maximum number of PASIDs supported by device
486  * @pdev: PCI device structure
487  *
488  * Returns negative value when PASID capability is not present.
489  * Otherwise it returns the number of supported PASIDs.
490  */
491 int pci_max_pasids(struct pci_dev *pdev)
492 {
493 	u16 supported;
494 	int pasid;
495 
496 	if (pdev->is_virtfn)
497 		pdev = pci_physfn(pdev);
498 
499 	pasid = pdev->pasid_cap;
500 	if (!pasid)
501 		return -EINVAL;
502 
503 	pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
504 
505 	return (1 << FIELD_GET(PCI_PASID_CAP_WIDTH, supported));
506 }
507 EXPORT_SYMBOL_GPL(pci_max_pasids);
508 #endif /* CONFIG_PCI_PASID */
509