xref: /linux/drivers/clocksource/timer-loongson1-pwm.c (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Clocksource driver for Loongson-1 SoC
4  *
5  * Copyright (c) 2023 Keguang Zhang <keguang.zhang@gmail.com>
6  */
7 
8 #include <linux/clockchips.h>
9 #include <linux/interrupt.h>
10 #include <linux/sizes.h>
11 #include "timer-of.h"
12 
13 /* Loongson-1 PWM Timer Register Definitions */
14 #define PWM_CNTR		0x0
15 #define PWM_HRC			0x4
16 #define PWM_LRC			0x8
17 #define PWM_CTRL		0xc
18 
19 /* PWM Control Register Bits */
20 #define INT_LRC_EN		BIT(11)
21 #define INT_HRC_EN		BIT(10)
22 #define CNTR_RST		BIT(7)
23 #define INT_SR			BIT(6)
24 #define INT_EN			BIT(5)
25 #define PWM_SINGLE		BIT(4)
26 #define PWM_OE			BIT(3)
27 #define CNT_EN			BIT(0)
28 
29 #define CNTR_WIDTH		24
30 
31 static DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
32 
33 struct ls1x_clocksource {
34 	void __iomem *reg_base;
35 	unsigned long ticks_per_jiffy;
36 	struct clocksource clksrc;
37 };
38 
to_ls1x_clksrc(struct clocksource * c)39 static inline struct ls1x_clocksource *to_ls1x_clksrc(struct clocksource *c)
40 {
41 	return container_of(c, struct ls1x_clocksource, clksrc);
42 }
43 
ls1x_pwmtimer_set_period(unsigned int period,struct timer_of * to)44 static inline void ls1x_pwmtimer_set_period(unsigned int period,
45 					    struct timer_of *to)
46 {
47 	writel(period, timer_of_base(to) + PWM_LRC);
48 	writel(period, timer_of_base(to) + PWM_HRC);
49 }
50 
ls1x_pwmtimer_clear(struct timer_of * to)51 static inline void ls1x_pwmtimer_clear(struct timer_of *to)
52 {
53 	writel(0, timer_of_base(to) + PWM_CNTR);
54 }
55 
ls1x_pwmtimer_start(struct timer_of * to)56 static inline void ls1x_pwmtimer_start(struct timer_of *to)
57 {
58 	writel((INT_EN | PWM_OE | CNT_EN), timer_of_base(to) + PWM_CTRL);
59 }
60 
ls1x_pwmtimer_stop(struct timer_of * to)61 static inline void ls1x_pwmtimer_stop(struct timer_of *to)
62 {
63 	writel(0, timer_of_base(to) + PWM_CTRL);
64 }
65 
ls1x_pwmtimer_irq_ack(struct timer_of * to)66 static inline void ls1x_pwmtimer_irq_ack(struct timer_of *to)
67 {
68 	int val;
69 
70 	val = readl(timer_of_base(to) + PWM_CTRL);
71 	val |= INT_SR;
72 	writel(val, timer_of_base(to) + PWM_CTRL);
73 }
74 
ls1x_clockevent_isr(int irq,void * dev_id)75 static irqreturn_t ls1x_clockevent_isr(int irq, void *dev_id)
76 {
77 	struct clock_event_device *clkevt = dev_id;
78 	struct timer_of *to = to_timer_of(clkevt);
79 
80 	ls1x_pwmtimer_irq_ack(to);
81 	ls1x_pwmtimer_clear(to);
82 	ls1x_pwmtimer_start(to);
83 
84 	clkevt->event_handler(clkevt);
85 
86 	return IRQ_HANDLED;
87 }
88 
ls1x_clockevent_set_state_periodic(struct clock_event_device * clkevt)89 static int ls1x_clockevent_set_state_periodic(struct clock_event_device *clkevt)
90 {
91 	struct timer_of *to = to_timer_of(clkevt);
92 
93 	raw_spin_lock(&ls1x_timer_lock);
94 	ls1x_pwmtimer_set_period(timer_of_period(to), to);
95 	ls1x_pwmtimer_clear(to);
96 	ls1x_pwmtimer_start(to);
97 	raw_spin_unlock(&ls1x_timer_lock);
98 
99 	return 0;
100 }
101 
ls1x_clockevent_tick_resume(struct clock_event_device * clkevt)102 static int ls1x_clockevent_tick_resume(struct clock_event_device *clkevt)
103 {
104 	raw_spin_lock(&ls1x_timer_lock);
105 	ls1x_pwmtimer_start(to_timer_of(clkevt));
106 	raw_spin_unlock(&ls1x_timer_lock);
107 
108 	return 0;
109 }
110 
ls1x_clockevent_set_state_shutdown(struct clock_event_device * clkevt)111 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *clkevt)
112 {
113 	raw_spin_lock(&ls1x_timer_lock);
114 	ls1x_pwmtimer_stop(to_timer_of(clkevt));
115 	raw_spin_unlock(&ls1x_timer_lock);
116 
117 	return 0;
118 }
119 
ls1x_clockevent_set_next(unsigned long evt,struct clock_event_device * clkevt)120 static int ls1x_clockevent_set_next(unsigned long evt,
121 				    struct clock_event_device *clkevt)
122 {
123 	struct timer_of *to = to_timer_of(clkevt);
124 
125 	raw_spin_lock(&ls1x_timer_lock);
126 	ls1x_pwmtimer_set_period(evt, to);
127 	ls1x_pwmtimer_clear(to);
128 	ls1x_pwmtimer_start(to);
129 	raw_spin_unlock(&ls1x_timer_lock);
130 
131 	return 0;
132 }
133 
134 static struct timer_of ls1x_to = {
135 	.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
136 	.clkevt = {
137 		.name			= "ls1x-pwmtimer",
138 		.features		= CLOCK_EVT_FEAT_PERIODIC |
139 					  CLOCK_EVT_FEAT_ONESHOT,
140 		.rating			= 300,
141 		.set_next_event		= ls1x_clockevent_set_next,
142 		.set_state_periodic	= ls1x_clockevent_set_state_periodic,
143 		.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
144 		.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
145 		.tick_resume		= ls1x_clockevent_tick_resume,
146 	},
147 	.of_irq = {
148 		.handler		= ls1x_clockevent_isr,
149 		.flags			= IRQF_TIMER,
150 	},
151 };
152 
153 /*
154  * Since the PWM timer overflows every two ticks, its not very useful
155  * to just read by itself. So use jiffies to emulate a free
156  * running counter:
157  */
ls1x_clocksource_read(struct clocksource * cs)158 static u64 ls1x_clocksource_read(struct clocksource *cs)
159 {
160 	struct ls1x_clocksource *ls1x_cs = to_ls1x_clksrc(cs);
161 	unsigned long flags;
162 	int count;
163 	u32 jifs;
164 	static int old_count;
165 	static u32 old_jifs;
166 
167 	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
168 	/*
169 	 * Although our caller may have the read side of xtime_lock,
170 	 * this is now a seqlock, and we are cheating in this routine
171 	 * by having side effects on state that we cannot undo if
172 	 * there is a collision on the seqlock and our caller has to
173 	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
174 	 * jiffies as volatile despite the lock.  We read jiffies
175 	 * before latching the timer count to guarantee that although
176 	 * the jiffies value might be older than the count (that is,
177 	 * the counter may underflow between the last point where
178 	 * jiffies was incremented and the point where we latch the
179 	 * count), it cannot be newer.
180 	 */
181 	jifs = jiffies;
182 	/* read the count */
183 	count = readl(ls1x_cs->reg_base + PWM_CNTR);
184 
185 	/*
186 	 * It's possible for count to appear to go the wrong way for this
187 	 * reason:
188 	 *
189 	 *  The timer counter underflows, but we haven't handled the resulting
190 	 *  interrupt and incremented jiffies yet.
191 	 *
192 	 * Previous attempts to handle these cases intelligently were buggy, so
193 	 * we just do the simple thing now.
194 	 */
195 	if (count < old_count && jifs == old_jifs)
196 		count = old_count;
197 
198 	old_count = count;
199 	old_jifs = jifs;
200 
201 	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
202 
203 	return (u64)(jifs * ls1x_cs->ticks_per_jiffy) + count;
204 }
205 
206 static struct ls1x_clocksource ls1x_clocksource = {
207 	.clksrc = {
208 		.name           = "ls1x-pwmtimer",
209 		.rating		= 300,
210 		.read           = ls1x_clocksource_read,
211 		.mask           = CLOCKSOURCE_MASK(CNTR_WIDTH),
212 		.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
213 	},
214 };
215 
ls1x_pwm_clocksource_init(struct device_node * np)216 static int __init ls1x_pwm_clocksource_init(struct device_node *np)
217 {
218 	struct timer_of *to = &ls1x_to;
219 	int ret;
220 
221 	ret = timer_of_init(np, to);
222 	if (ret)
223 		return ret;
224 
225 	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
226 					0x1, GENMASK(CNTR_WIDTH - 1, 0));
227 
228 	ls1x_clocksource.reg_base = timer_of_base(to);
229 	ls1x_clocksource.ticks_per_jiffy = timer_of_period(to);
230 
231 	return clocksource_register_hz(&ls1x_clocksource.clksrc,
232 				       timer_of_rate(to));
233 }
234 
235 TIMER_OF_DECLARE(ls1x_pwm_clocksource, "loongson,ls1b-pwmtimer",
236 		 ls1x_pwm_clocksource_init);
237