1 /* 2 * Core of Xen paravirt_ops implementation. 3 * 4 * This file contains the xen_paravirt_ops structure itself, and the 5 * implementations for: 6 * - privileged instructions 7 * - interrupt flags 8 * - segment operations 9 * - booting and setup 10 * 11 * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 12 */ 13 14 #include <linux/cpu.h> 15 #include <linux/kernel.h> 16 #include <linux/init.h> 17 #include <linux/smp.h> 18 #include <linux/preempt.h> 19 #include <linux/hardirq.h> 20 #include <linux/percpu.h> 21 #include <linux/delay.h> 22 #include <linux/start_kernel.h> 23 #include <linux/sched.h> 24 #include <linux/kprobes.h> 25 #include <linux/bootmem.h> 26 #include <linux/module.h> 27 #include <linux/mm.h> 28 #include <linux/page-flags.h> 29 #include <linux/highmem.h> 30 #include <linux/console.h> 31 #include <linux/pci.h> 32 #include <linux/gfp.h> 33 #include <linux/memblock.h> 34 #include <linux/edd.h> 35 36 #include <xen/xen.h> 37 #include <xen/events.h> 38 #include <xen/interface/xen.h> 39 #include <xen/interface/version.h> 40 #include <xen/interface/physdev.h> 41 #include <xen/interface/vcpu.h> 42 #include <xen/interface/memory.h> 43 #include <xen/interface/nmi.h> 44 #include <xen/interface/xen-mca.h> 45 #include <xen/features.h> 46 #include <xen/page.h> 47 #include <xen/hvm.h> 48 #include <xen/hvc-console.h> 49 #include <xen/acpi.h> 50 51 #include <asm/paravirt.h> 52 #include <asm/apic.h> 53 #include <asm/page.h> 54 #include <asm/xen/pci.h> 55 #include <asm/xen/hypercall.h> 56 #include <asm/xen/hypervisor.h> 57 #include <asm/fixmap.h> 58 #include <asm/processor.h> 59 #include <asm/proto.h> 60 #include <asm/msr-index.h> 61 #include <asm/traps.h> 62 #include <asm/setup.h> 63 #include <asm/desc.h> 64 #include <asm/pgalloc.h> 65 #include <asm/pgtable.h> 66 #include <asm/tlbflush.h> 67 #include <asm/reboot.h> 68 #include <asm/stackprotector.h> 69 #include <asm/hypervisor.h> 70 #include <asm/mach_traps.h> 71 #include <asm/mwait.h> 72 #include <asm/pci_x86.h> 73 #include <asm/pat.h> 74 75 #ifdef CONFIG_ACPI 76 #include <linux/acpi.h> 77 #include <asm/acpi.h> 78 #include <acpi/pdc_intel.h> 79 #include <acpi/processor.h> 80 #include <xen/interface/platform.h> 81 #endif 82 83 #include "xen-ops.h" 84 #include "mmu.h" 85 #include "smp.h" 86 #include "multicalls.h" 87 88 EXPORT_SYMBOL_GPL(hypercall_page); 89 90 /* 91 * Pointer to the xen_vcpu_info structure or 92 * &HYPERVISOR_shared_info->vcpu_info[cpu]. See xen_hvm_init_shared_info 93 * and xen_vcpu_setup for details. By default it points to share_info->vcpu_info 94 * but if the hypervisor supports VCPUOP_register_vcpu_info then it can point 95 * to xen_vcpu_info. The pointer is used in __xen_evtchn_do_upcall to 96 * acknowledge pending events. 97 * Also more subtly it is used by the patched version of irq enable/disable 98 * e.g. xen_irq_enable_direct and xen_iret in PV mode. 99 * 100 * The desire to be able to do those mask/unmask operations as a single 101 * instruction by using the per-cpu offset held in %gs is the real reason 102 * vcpu info is in a per-cpu pointer and the original reason for this 103 * hypercall. 104 * 105 */ 106 DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); 107 108 /* 109 * Per CPU pages used if hypervisor supports VCPUOP_register_vcpu_info 110 * hypercall. This can be used both in PV and PVHVM mode. The structure 111 * overrides the default per_cpu(xen_vcpu, cpu) value. 112 */ 113 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); 114 115 enum xen_domain_type xen_domain_type = XEN_NATIVE; 116 EXPORT_SYMBOL_GPL(xen_domain_type); 117 118 unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START; 119 EXPORT_SYMBOL(machine_to_phys_mapping); 120 unsigned long machine_to_phys_nr; 121 EXPORT_SYMBOL(machine_to_phys_nr); 122 123 struct start_info *xen_start_info; 124 EXPORT_SYMBOL_GPL(xen_start_info); 125 126 struct shared_info xen_dummy_shared_info; 127 128 void *xen_initial_gdt; 129 130 RESERVE_BRK(shared_info_page_brk, PAGE_SIZE); 131 __read_mostly int xen_have_vector_callback; 132 EXPORT_SYMBOL_GPL(xen_have_vector_callback); 133 134 /* 135 * Point at some empty memory to start with. We map the real shared_info 136 * page as soon as fixmap is up and running. 137 */ 138 struct shared_info *HYPERVISOR_shared_info = &xen_dummy_shared_info; 139 140 /* 141 * Flag to determine whether vcpu info placement is available on all 142 * VCPUs. We assume it is to start with, and then set it to zero on 143 * the first failure. This is because it can succeed on some VCPUs 144 * and not others, since it can involve hypervisor memory allocation, 145 * or because the guest failed to guarantee all the appropriate 146 * constraints on all VCPUs (ie buffer can't cross a page boundary). 147 * 148 * Note that any particular CPU may be using a placed vcpu structure, 149 * but we can only optimise if the all are. 150 * 151 * 0: not available, 1: available 152 */ 153 static int have_vcpu_info_placement = 1; 154 155 struct tls_descs { 156 struct desc_struct desc[3]; 157 }; 158 159 /* 160 * Updating the 3 TLS descriptors in the GDT on every task switch is 161 * surprisingly expensive so we avoid updating them if they haven't 162 * changed. Since Xen writes different descriptors than the one 163 * passed in the update_descriptor hypercall we keep shadow copies to 164 * compare against. 165 */ 166 static DEFINE_PER_CPU(struct tls_descs, shadow_tls_desc); 167 168 static void clamp_max_cpus(void) 169 { 170 #ifdef CONFIG_SMP 171 if (setup_max_cpus > MAX_VIRT_CPUS) 172 setup_max_cpus = MAX_VIRT_CPUS; 173 #endif 174 } 175 176 static void xen_vcpu_setup(int cpu) 177 { 178 struct vcpu_register_vcpu_info info; 179 int err; 180 struct vcpu_info *vcpup; 181 182 BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); 183 184 /* 185 * This path is called twice on PVHVM - first during bootup via 186 * smp_init -> xen_hvm_cpu_notify, and then if the VCPU is being 187 * hotplugged: cpu_up -> xen_hvm_cpu_notify. 188 * As we can only do the VCPUOP_register_vcpu_info once lets 189 * not over-write its result. 190 * 191 * For PV it is called during restore (xen_vcpu_restore) and bootup 192 * (xen_setup_vcpu_info_placement). The hotplug mechanism does not 193 * use this function. 194 */ 195 if (xen_hvm_domain()) { 196 if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu)) 197 return; 198 } 199 if (cpu < MAX_VIRT_CPUS) 200 per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; 201 202 if (!have_vcpu_info_placement) { 203 if (cpu >= MAX_VIRT_CPUS) 204 clamp_max_cpus(); 205 return; 206 } 207 208 vcpup = &per_cpu(xen_vcpu_info, cpu); 209 info.mfn = arbitrary_virt_to_mfn(vcpup); 210 info.offset = offset_in_page(vcpup); 211 212 /* Check to see if the hypervisor will put the vcpu_info 213 structure where we want it, which allows direct access via 214 a percpu-variable. 215 N.B. This hypercall can _only_ be called once per CPU. Subsequent 216 calls will error out with -EINVAL. This is due to the fact that 217 hypervisor has no unregister variant and this hypercall does not 218 allow to over-write info.mfn and info.offset. 219 */ 220 err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); 221 222 if (err) { 223 printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err); 224 have_vcpu_info_placement = 0; 225 clamp_max_cpus(); 226 } else { 227 /* This cpu is using the registered vcpu info, even if 228 later ones fail to. */ 229 per_cpu(xen_vcpu, cpu) = vcpup; 230 } 231 } 232 233 /* 234 * On restore, set the vcpu placement up again. 235 * If it fails, then we're in a bad state, since 236 * we can't back out from using it... 237 */ 238 void xen_vcpu_restore(void) 239 { 240 int cpu; 241 242 for_each_possible_cpu(cpu) { 243 bool other_cpu = (cpu != smp_processor_id()); 244 bool is_up = HYPERVISOR_vcpu_op(VCPUOP_is_up, cpu, NULL); 245 246 if (other_cpu && is_up && 247 HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) 248 BUG(); 249 250 xen_setup_runstate_info(cpu); 251 252 if (have_vcpu_info_placement) 253 xen_vcpu_setup(cpu); 254 255 if (other_cpu && is_up && 256 HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) 257 BUG(); 258 } 259 } 260 261 static void __init xen_banner(void) 262 { 263 unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL); 264 struct xen_extraversion extra; 265 HYPERVISOR_xen_version(XENVER_extraversion, &extra); 266 267 pr_info("Booting paravirtualized kernel %son %s\n", 268 xen_feature(XENFEAT_auto_translated_physmap) ? 269 "with PVH extensions " : "", pv_info.name); 270 printk(KERN_INFO "Xen version: %d.%d%s%s\n", 271 version >> 16, version & 0xffff, extra.extraversion, 272 xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); 273 } 274 /* Check if running on Xen version (major, minor) or later */ 275 bool 276 xen_running_on_version_or_later(unsigned int major, unsigned int minor) 277 { 278 unsigned int version; 279 280 if (!xen_domain()) 281 return false; 282 283 version = HYPERVISOR_xen_version(XENVER_version, NULL); 284 if ((((version >> 16) == major) && ((version & 0xffff) >= minor)) || 285 ((version >> 16) > major)) 286 return true; 287 return false; 288 } 289 290 #define CPUID_THERM_POWER_LEAF 6 291 #define APERFMPERF_PRESENT 0 292 293 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0; 294 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; 295 296 static __read_mostly unsigned int cpuid_leaf1_ecx_set_mask; 297 static __read_mostly unsigned int cpuid_leaf5_ecx_val; 298 static __read_mostly unsigned int cpuid_leaf5_edx_val; 299 300 static void xen_cpuid(unsigned int *ax, unsigned int *bx, 301 unsigned int *cx, unsigned int *dx) 302 { 303 unsigned maskebx = ~0; 304 unsigned maskecx = ~0; 305 unsigned maskedx = ~0; 306 unsigned setecx = 0; 307 /* 308 * Mask out inconvenient features, to try and disable as many 309 * unsupported kernel subsystems as possible. 310 */ 311 switch (*ax) { 312 case 1: 313 maskecx = cpuid_leaf1_ecx_mask; 314 setecx = cpuid_leaf1_ecx_set_mask; 315 maskedx = cpuid_leaf1_edx_mask; 316 break; 317 318 case CPUID_MWAIT_LEAF: 319 /* Synthesize the values.. */ 320 *ax = 0; 321 *bx = 0; 322 *cx = cpuid_leaf5_ecx_val; 323 *dx = cpuid_leaf5_edx_val; 324 return; 325 326 case CPUID_THERM_POWER_LEAF: 327 /* Disabling APERFMPERF for kernel usage */ 328 maskecx = ~(1 << APERFMPERF_PRESENT); 329 break; 330 331 case 0xb: 332 /* Suppress extended topology stuff */ 333 maskebx = 0; 334 break; 335 } 336 337 asm(XEN_EMULATE_PREFIX "cpuid" 338 : "=a" (*ax), 339 "=b" (*bx), 340 "=c" (*cx), 341 "=d" (*dx) 342 : "0" (*ax), "2" (*cx)); 343 344 *bx &= maskebx; 345 *cx &= maskecx; 346 *cx |= setecx; 347 *dx &= maskedx; 348 349 } 350 351 static bool __init xen_check_mwait(void) 352 { 353 #ifdef CONFIG_ACPI 354 struct xen_platform_op op = { 355 .cmd = XENPF_set_processor_pminfo, 356 .u.set_pminfo.id = -1, 357 .u.set_pminfo.type = XEN_PM_PDC, 358 }; 359 uint32_t buf[3]; 360 unsigned int ax, bx, cx, dx; 361 unsigned int mwait_mask; 362 363 /* We need to determine whether it is OK to expose the MWAIT 364 * capability to the kernel to harvest deeper than C3 states from ACPI 365 * _CST using the processor_harvest_xen.c module. For this to work, we 366 * need to gather the MWAIT_LEAF values (which the cstate.c code 367 * checks against). The hypervisor won't expose the MWAIT flag because 368 * it would break backwards compatibility; so we will find out directly 369 * from the hardware and hypercall. 370 */ 371 if (!xen_initial_domain()) 372 return false; 373 374 /* 375 * When running under platform earlier than Xen4.2, do not expose 376 * mwait, to avoid the risk of loading native acpi pad driver 377 */ 378 if (!xen_running_on_version_or_later(4, 2)) 379 return false; 380 381 ax = 1; 382 cx = 0; 383 384 native_cpuid(&ax, &bx, &cx, &dx); 385 386 mwait_mask = (1 << (X86_FEATURE_EST % 32)) | 387 (1 << (X86_FEATURE_MWAIT % 32)); 388 389 if ((cx & mwait_mask) != mwait_mask) 390 return false; 391 392 /* We need to emulate the MWAIT_LEAF and for that we need both 393 * ecx and edx. The hypercall provides only partial information. 394 */ 395 396 ax = CPUID_MWAIT_LEAF; 397 bx = 0; 398 cx = 0; 399 dx = 0; 400 401 native_cpuid(&ax, &bx, &cx, &dx); 402 403 /* Ask the Hypervisor whether to clear ACPI_PDC_C_C2C3_FFH. If so, 404 * don't expose MWAIT_LEAF and let ACPI pick the IOPORT version of C3. 405 */ 406 buf[0] = ACPI_PDC_REVISION_ID; 407 buf[1] = 1; 408 buf[2] = (ACPI_PDC_C_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_SWSMP); 409 410 set_xen_guest_handle(op.u.set_pminfo.pdc, buf); 411 412 if ((HYPERVISOR_dom0_op(&op) == 0) && 413 (buf[2] & (ACPI_PDC_C_C1_FFH | ACPI_PDC_C_C2C3_FFH))) { 414 cpuid_leaf5_ecx_val = cx; 415 cpuid_leaf5_edx_val = dx; 416 } 417 return true; 418 #else 419 return false; 420 #endif 421 } 422 static void __init xen_init_cpuid_mask(void) 423 { 424 unsigned int ax, bx, cx, dx; 425 unsigned int xsave_mask; 426 427 cpuid_leaf1_edx_mask = 428 ~((1 << X86_FEATURE_MTRR) | /* disable MTRR */ 429 (1 << X86_FEATURE_ACC)); /* thermal monitoring */ 430 431 if (!xen_initial_domain()) 432 cpuid_leaf1_edx_mask &= 433 ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */ 434 435 cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32)); 436 437 ax = 1; 438 cx = 0; 439 cpuid(1, &ax, &bx, &cx, &dx); 440 441 xsave_mask = 442 (1 << (X86_FEATURE_XSAVE % 32)) | 443 (1 << (X86_FEATURE_OSXSAVE % 32)); 444 445 /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ 446 if ((cx & xsave_mask) != xsave_mask) 447 cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ 448 if (xen_check_mwait()) 449 cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)); 450 } 451 452 static void xen_set_debugreg(int reg, unsigned long val) 453 { 454 HYPERVISOR_set_debugreg(reg, val); 455 } 456 457 static unsigned long xen_get_debugreg(int reg) 458 { 459 return HYPERVISOR_get_debugreg(reg); 460 } 461 462 static void xen_end_context_switch(struct task_struct *next) 463 { 464 xen_mc_flush(); 465 paravirt_end_context_switch(next); 466 } 467 468 static unsigned long xen_store_tr(void) 469 { 470 return 0; 471 } 472 473 /* 474 * Set the page permissions for a particular virtual address. If the 475 * address is a vmalloc mapping (or other non-linear mapping), then 476 * find the linear mapping of the page and also set its protections to 477 * match. 478 */ 479 static void set_aliased_prot(void *v, pgprot_t prot) 480 { 481 int level; 482 pte_t *ptep; 483 pte_t pte; 484 unsigned long pfn; 485 struct page *page; 486 487 ptep = lookup_address((unsigned long)v, &level); 488 BUG_ON(ptep == NULL); 489 490 pfn = pte_pfn(*ptep); 491 page = pfn_to_page(pfn); 492 493 pte = pfn_pte(pfn, prot); 494 495 if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0)) 496 BUG(); 497 498 if (!PageHighMem(page)) { 499 void *av = __va(PFN_PHYS(pfn)); 500 501 if (av != v) 502 if (HYPERVISOR_update_va_mapping((unsigned long)av, pte, 0)) 503 BUG(); 504 } else 505 kmap_flush_unused(); 506 } 507 508 static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries) 509 { 510 const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE; 511 int i; 512 513 for(i = 0; i < entries; i += entries_per_page) 514 set_aliased_prot(ldt + i, PAGE_KERNEL_RO); 515 } 516 517 static void xen_free_ldt(struct desc_struct *ldt, unsigned entries) 518 { 519 const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE; 520 int i; 521 522 for(i = 0; i < entries; i += entries_per_page) 523 set_aliased_prot(ldt + i, PAGE_KERNEL); 524 } 525 526 static void xen_set_ldt(const void *addr, unsigned entries) 527 { 528 struct mmuext_op *op; 529 struct multicall_space mcs = xen_mc_entry(sizeof(*op)); 530 531 trace_xen_cpu_set_ldt(addr, entries); 532 533 op = mcs.args; 534 op->cmd = MMUEXT_SET_LDT; 535 op->arg1.linear_addr = (unsigned long)addr; 536 op->arg2.nr_ents = entries; 537 538 MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); 539 540 xen_mc_issue(PARAVIRT_LAZY_CPU); 541 } 542 543 static void xen_load_gdt(const struct desc_ptr *dtr) 544 { 545 unsigned long va = dtr->address; 546 unsigned int size = dtr->size + 1; 547 unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE; 548 unsigned long frames[pages]; 549 int f; 550 551 /* 552 * A GDT can be up to 64k in size, which corresponds to 8192 553 * 8-byte entries, or 16 4k pages.. 554 */ 555 556 BUG_ON(size > 65536); 557 BUG_ON(va & ~PAGE_MASK); 558 559 for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) { 560 int level; 561 pte_t *ptep; 562 unsigned long pfn, mfn; 563 void *virt; 564 565 /* 566 * The GDT is per-cpu and is in the percpu data area. 567 * That can be virtually mapped, so we need to do a 568 * page-walk to get the underlying MFN for the 569 * hypercall. The page can also be in the kernel's 570 * linear range, so we need to RO that mapping too. 571 */ 572 ptep = lookup_address(va, &level); 573 BUG_ON(ptep == NULL); 574 575 pfn = pte_pfn(*ptep); 576 mfn = pfn_to_mfn(pfn); 577 virt = __va(PFN_PHYS(pfn)); 578 579 frames[f] = mfn; 580 581 make_lowmem_page_readonly((void *)va); 582 make_lowmem_page_readonly(virt); 583 } 584 585 if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct))) 586 BUG(); 587 } 588 589 /* 590 * load_gdt for early boot, when the gdt is only mapped once 591 */ 592 static void __init xen_load_gdt_boot(const struct desc_ptr *dtr) 593 { 594 unsigned long va = dtr->address; 595 unsigned int size = dtr->size + 1; 596 unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE; 597 unsigned long frames[pages]; 598 int f; 599 600 /* 601 * A GDT can be up to 64k in size, which corresponds to 8192 602 * 8-byte entries, or 16 4k pages.. 603 */ 604 605 BUG_ON(size > 65536); 606 BUG_ON(va & ~PAGE_MASK); 607 608 for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) { 609 pte_t pte; 610 unsigned long pfn, mfn; 611 612 pfn = virt_to_pfn(va); 613 mfn = pfn_to_mfn(pfn); 614 615 pte = pfn_pte(pfn, PAGE_KERNEL_RO); 616 617 if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0)) 618 BUG(); 619 620 frames[f] = mfn; 621 } 622 623 if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct))) 624 BUG(); 625 } 626 627 static inline bool desc_equal(const struct desc_struct *d1, 628 const struct desc_struct *d2) 629 { 630 return d1->a == d2->a && d1->b == d2->b; 631 } 632 633 static void load_TLS_descriptor(struct thread_struct *t, 634 unsigned int cpu, unsigned int i) 635 { 636 struct desc_struct *shadow = &per_cpu(shadow_tls_desc, cpu).desc[i]; 637 struct desc_struct *gdt; 638 xmaddr_t maddr; 639 struct multicall_space mc; 640 641 if (desc_equal(shadow, &t->tls_array[i])) 642 return; 643 644 *shadow = t->tls_array[i]; 645 646 gdt = get_cpu_gdt_table(cpu); 647 maddr = arbitrary_virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]); 648 mc = __xen_mc_entry(0); 649 650 MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]); 651 } 652 653 static void xen_load_tls(struct thread_struct *t, unsigned int cpu) 654 { 655 /* 656 * XXX sleazy hack: If we're being called in a lazy-cpu zone 657 * and lazy gs handling is enabled, it means we're in a 658 * context switch, and %gs has just been saved. This means we 659 * can zero it out to prevent faults on exit from the 660 * hypervisor if the next process has no %gs. Either way, it 661 * has been saved, and the new value will get loaded properly. 662 * This will go away as soon as Xen has been modified to not 663 * save/restore %gs for normal hypercalls. 664 * 665 * On x86_64, this hack is not used for %gs, because gs points 666 * to KERNEL_GS_BASE (and uses it for PDA references), so we 667 * must not zero %gs on x86_64 668 * 669 * For x86_64, we need to zero %fs, otherwise we may get an 670 * exception between the new %fs descriptor being loaded and 671 * %fs being effectively cleared at __switch_to(). 672 */ 673 if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) { 674 #ifdef CONFIG_X86_32 675 lazy_load_gs(0); 676 #else 677 loadsegment(fs, 0); 678 #endif 679 } 680 681 xen_mc_batch(); 682 683 load_TLS_descriptor(t, cpu, 0); 684 load_TLS_descriptor(t, cpu, 1); 685 load_TLS_descriptor(t, cpu, 2); 686 687 xen_mc_issue(PARAVIRT_LAZY_CPU); 688 } 689 690 #ifdef CONFIG_X86_64 691 static void xen_load_gs_index(unsigned int idx) 692 { 693 if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx)) 694 BUG(); 695 } 696 #endif 697 698 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum, 699 const void *ptr) 700 { 701 xmaddr_t mach_lp = arbitrary_virt_to_machine(&dt[entrynum]); 702 u64 entry = *(u64 *)ptr; 703 704 trace_xen_cpu_write_ldt_entry(dt, entrynum, entry); 705 706 preempt_disable(); 707 708 xen_mc_flush(); 709 if (HYPERVISOR_update_descriptor(mach_lp.maddr, entry)) 710 BUG(); 711 712 preempt_enable(); 713 } 714 715 static int cvt_gate_to_trap(int vector, const gate_desc *val, 716 struct trap_info *info) 717 { 718 unsigned long addr; 719 720 if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT) 721 return 0; 722 723 info->vector = vector; 724 725 addr = gate_offset(*val); 726 #ifdef CONFIG_X86_64 727 /* 728 * Look for known traps using IST, and substitute them 729 * appropriately. The debugger ones are the only ones we care 730 * about. Xen will handle faults like double_fault, 731 * so we should never see them. Warn if 732 * there's an unexpected IST-using fault handler. 733 */ 734 if (addr == (unsigned long)debug) 735 addr = (unsigned long)xen_debug; 736 else if (addr == (unsigned long)int3) 737 addr = (unsigned long)xen_int3; 738 else if (addr == (unsigned long)stack_segment) 739 addr = (unsigned long)xen_stack_segment; 740 else if (addr == (unsigned long)double_fault) { 741 /* Don't need to handle these */ 742 return 0; 743 #ifdef CONFIG_X86_MCE 744 } else if (addr == (unsigned long)machine_check) { 745 /* 746 * when xen hypervisor inject vMCE to guest, 747 * use native mce handler to handle it 748 */ 749 ; 750 #endif 751 } else if (addr == (unsigned long)nmi) 752 /* 753 * Use the native version as well. 754 */ 755 ; 756 else { 757 /* Some other trap using IST? */ 758 if (WARN_ON(val->ist != 0)) 759 return 0; 760 } 761 #endif /* CONFIG_X86_64 */ 762 info->address = addr; 763 764 info->cs = gate_segment(*val); 765 info->flags = val->dpl; 766 /* interrupt gates clear IF */ 767 if (val->type == GATE_INTERRUPT) 768 info->flags |= 1 << 2; 769 770 return 1; 771 } 772 773 /* Locations of each CPU's IDT */ 774 static DEFINE_PER_CPU(struct desc_ptr, idt_desc); 775 776 /* Set an IDT entry. If the entry is part of the current IDT, then 777 also update Xen. */ 778 static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) 779 { 780 unsigned long p = (unsigned long)&dt[entrynum]; 781 unsigned long start, end; 782 783 trace_xen_cpu_write_idt_entry(dt, entrynum, g); 784 785 preempt_disable(); 786 787 start = __this_cpu_read(idt_desc.address); 788 end = start + __this_cpu_read(idt_desc.size) + 1; 789 790 xen_mc_flush(); 791 792 native_write_idt_entry(dt, entrynum, g); 793 794 if (p >= start && (p + 8) <= end) { 795 struct trap_info info[2]; 796 797 info[1].address = 0; 798 799 if (cvt_gate_to_trap(entrynum, g, &info[0])) 800 if (HYPERVISOR_set_trap_table(info)) 801 BUG(); 802 } 803 804 preempt_enable(); 805 } 806 807 static void xen_convert_trap_info(const struct desc_ptr *desc, 808 struct trap_info *traps) 809 { 810 unsigned in, out, count; 811 812 count = (desc->size+1) / sizeof(gate_desc); 813 BUG_ON(count > 256); 814 815 for (in = out = 0; in < count; in++) { 816 gate_desc *entry = (gate_desc*)(desc->address) + in; 817 818 if (cvt_gate_to_trap(in, entry, &traps[out])) 819 out++; 820 } 821 traps[out].address = 0; 822 } 823 824 void xen_copy_trap_info(struct trap_info *traps) 825 { 826 const struct desc_ptr *desc = this_cpu_ptr(&idt_desc); 827 828 xen_convert_trap_info(desc, traps); 829 } 830 831 /* Load a new IDT into Xen. In principle this can be per-CPU, so we 832 hold a spinlock to protect the static traps[] array (static because 833 it avoids allocation, and saves stack space). */ 834 static void xen_load_idt(const struct desc_ptr *desc) 835 { 836 static DEFINE_SPINLOCK(lock); 837 static struct trap_info traps[257]; 838 839 trace_xen_cpu_load_idt(desc); 840 841 spin_lock(&lock); 842 843 memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc)); 844 845 xen_convert_trap_info(desc, traps); 846 847 xen_mc_flush(); 848 if (HYPERVISOR_set_trap_table(traps)) 849 BUG(); 850 851 spin_unlock(&lock); 852 } 853 854 /* Write a GDT descriptor entry. Ignore LDT descriptors, since 855 they're handled differently. */ 856 static void xen_write_gdt_entry(struct desc_struct *dt, int entry, 857 const void *desc, int type) 858 { 859 trace_xen_cpu_write_gdt_entry(dt, entry, desc, type); 860 861 preempt_disable(); 862 863 switch (type) { 864 case DESC_LDT: 865 case DESC_TSS: 866 /* ignore */ 867 break; 868 869 default: { 870 xmaddr_t maddr = arbitrary_virt_to_machine(&dt[entry]); 871 872 xen_mc_flush(); 873 if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc)) 874 BUG(); 875 } 876 877 } 878 879 preempt_enable(); 880 } 881 882 /* 883 * Version of write_gdt_entry for use at early boot-time needed to 884 * update an entry as simply as possible. 885 */ 886 static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry, 887 const void *desc, int type) 888 { 889 trace_xen_cpu_write_gdt_entry(dt, entry, desc, type); 890 891 switch (type) { 892 case DESC_LDT: 893 case DESC_TSS: 894 /* ignore */ 895 break; 896 897 default: { 898 xmaddr_t maddr = virt_to_machine(&dt[entry]); 899 900 if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc)) 901 dt[entry] = *(struct desc_struct *)desc; 902 } 903 904 } 905 } 906 907 static void xen_load_sp0(struct tss_struct *tss, 908 struct thread_struct *thread) 909 { 910 struct multicall_space mcs; 911 912 mcs = xen_mc_entry(0); 913 MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->sp0); 914 xen_mc_issue(PARAVIRT_LAZY_CPU); 915 tss->x86_tss.sp0 = thread->sp0; 916 } 917 918 static void xen_set_iopl_mask(unsigned mask) 919 { 920 struct physdev_set_iopl set_iopl; 921 922 /* Force the change at ring 0. */ 923 set_iopl.iopl = (mask == 0) ? 1 : (mask >> 12) & 3; 924 HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); 925 } 926 927 static void xen_io_delay(void) 928 { 929 } 930 931 #ifdef CONFIG_X86_LOCAL_APIC 932 static unsigned long xen_set_apic_id(unsigned int x) 933 { 934 WARN_ON(1); 935 return x; 936 } 937 static unsigned int xen_get_apic_id(unsigned long x) 938 { 939 return ((x)>>24) & 0xFFu; 940 } 941 static u32 xen_apic_read(u32 reg) 942 { 943 struct xen_platform_op op = { 944 .cmd = XENPF_get_cpuinfo, 945 .interface_version = XENPF_INTERFACE_VERSION, 946 .u.pcpu_info.xen_cpuid = 0, 947 }; 948 int ret = 0; 949 950 /* Shouldn't need this as APIC is turned off for PV, and we only 951 * get called on the bootup processor. But just in case. */ 952 if (!xen_initial_domain() || smp_processor_id()) 953 return 0; 954 955 if (reg == APIC_LVR) 956 return 0x10; 957 958 if (reg != APIC_ID) 959 return 0; 960 961 ret = HYPERVISOR_dom0_op(&op); 962 if (ret) 963 return 0; 964 965 return op.u.pcpu_info.apic_id << 24; 966 } 967 968 static void xen_apic_write(u32 reg, u32 val) 969 { 970 /* Warn to see if there's any stray references */ 971 WARN_ON(1); 972 } 973 974 static u64 xen_apic_icr_read(void) 975 { 976 return 0; 977 } 978 979 static void xen_apic_icr_write(u32 low, u32 id) 980 { 981 /* Warn to see if there's any stray references */ 982 WARN_ON(1); 983 } 984 985 static void xen_apic_wait_icr_idle(void) 986 { 987 return; 988 } 989 990 static u32 xen_safe_apic_wait_icr_idle(void) 991 { 992 return 0; 993 } 994 995 static void set_xen_basic_apic_ops(void) 996 { 997 apic->read = xen_apic_read; 998 apic->write = xen_apic_write; 999 apic->icr_read = xen_apic_icr_read; 1000 apic->icr_write = xen_apic_icr_write; 1001 apic->wait_icr_idle = xen_apic_wait_icr_idle; 1002 apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle; 1003 apic->set_apic_id = xen_set_apic_id; 1004 apic->get_apic_id = xen_get_apic_id; 1005 1006 #ifdef CONFIG_SMP 1007 apic->send_IPI_allbutself = xen_send_IPI_allbutself; 1008 apic->send_IPI_mask_allbutself = xen_send_IPI_mask_allbutself; 1009 apic->send_IPI_mask = xen_send_IPI_mask; 1010 apic->send_IPI_all = xen_send_IPI_all; 1011 apic->send_IPI_self = xen_send_IPI_self; 1012 #endif 1013 } 1014 1015 #endif 1016 1017 static void xen_clts(void) 1018 { 1019 struct multicall_space mcs; 1020 1021 mcs = xen_mc_entry(0); 1022 1023 MULTI_fpu_taskswitch(mcs.mc, 0); 1024 1025 xen_mc_issue(PARAVIRT_LAZY_CPU); 1026 } 1027 1028 static DEFINE_PER_CPU(unsigned long, xen_cr0_value); 1029 1030 static unsigned long xen_read_cr0(void) 1031 { 1032 unsigned long cr0 = this_cpu_read(xen_cr0_value); 1033 1034 if (unlikely(cr0 == 0)) { 1035 cr0 = native_read_cr0(); 1036 this_cpu_write(xen_cr0_value, cr0); 1037 } 1038 1039 return cr0; 1040 } 1041 1042 static void xen_write_cr0(unsigned long cr0) 1043 { 1044 struct multicall_space mcs; 1045 1046 this_cpu_write(xen_cr0_value, cr0); 1047 1048 /* Only pay attention to cr0.TS; everything else is 1049 ignored. */ 1050 mcs = xen_mc_entry(0); 1051 1052 MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); 1053 1054 xen_mc_issue(PARAVIRT_LAZY_CPU); 1055 } 1056 1057 static void xen_write_cr4(unsigned long cr4) 1058 { 1059 cr4 &= ~X86_CR4_PGE; 1060 cr4 &= ~X86_CR4_PSE; 1061 1062 native_write_cr4(cr4); 1063 } 1064 #ifdef CONFIG_X86_64 1065 static inline unsigned long xen_read_cr8(void) 1066 { 1067 return 0; 1068 } 1069 static inline void xen_write_cr8(unsigned long val) 1070 { 1071 BUG_ON(val); 1072 } 1073 #endif 1074 1075 static u64 xen_read_msr_safe(unsigned int msr, int *err) 1076 { 1077 u64 val; 1078 1079 val = native_read_msr_safe(msr, err); 1080 switch (msr) { 1081 case MSR_IA32_APICBASE: 1082 #ifdef CONFIG_X86_X2APIC 1083 if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31)))) 1084 #endif 1085 val &= ~X2APIC_ENABLE; 1086 break; 1087 } 1088 return val; 1089 } 1090 1091 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high) 1092 { 1093 int ret; 1094 1095 ret = 0; 1096 1097 switch (msr) { 1098 #ifdef CONFIG_X86_64 1099 unsigned which; 1100 u64 base; 1101 1102 case MSR_FS_BASE: which = SEGBASE_FS; goto set; 1103 case MSR_KERNEL_GS_BASE: which = SEGBASE_GS_USER; goto set; 1104 case MSR_GS_BASE: which = SEGBASE_GS_KERNEL; goto set; 1105 1106 set: 1107 base = ((u64)high << 32) | low; 1108 if (HYPERVISOR_set_segment_base(which, base) != 0) 1109 ret = -EIO; 1110 break; 1111 #endif 1112 1113 case MSR_STAR: 1114 case MSR_CSTAR: 1115 case MSR_LSTAR: 1116 case MSR_SYSCALL_MASK: 1117 case MSR_IA32_SYSENTER_CS: 1118 case MSR_IA32_SYSENTER_ESP: 1119 case MSR_IA32_SYSENTER_EIP: 1120 /* Fast syscall setup is all done in hypercalls, so 1121 these are all ignored. Stub them out here to stop 1122 Xen console noise. */ 1123 1124 default: 1125 ret = native_write_msr_safe(msr, low, high); 1126 } 1127 1128 return ret; 1129 } 1130 1131 void xen_setup_shared_info(void) 1132 { 1133 if (!xen_feature(XENFEAT_auto_translated_physmap)) { 1134 set_fixmap(FIX_PARAVIRT_BOOTMAP, 1135 xen_start_info->shared_info); 1136 1137 HYPERVISOR_shared_info = 1138 (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP); 1139 } else 1140 HYPERVISOR_shared_info = 1141 (struct shared_info *)__va(xen_start_info->shared_info); 1142 1143 #ifndef CONFIG_SMP 1144 /* In UP this is as good a place as any to set up shared info */ 1145 xen_setup_vcpu_info_placement(); 1146 #endif 1147 1148 xen_setup_mfn_list_list(); 1149 } 1150 1151 /* This is called once we have the cpu_possible_mask */ 1152 void xen_setup_vcpu_info_placement(void) 1153 { 1154 int cpu; 1155 1156 for_each_possible_cpu(cpu) 1157 xen_vcpu_setup(cpu); 1158 1159 /* xen_vcpu_setup managed to place the vcpu_info within the 1160 * percpu area for all cpus, so make use of it. Note that for 1161 * PVH we want to use native IRQ mechanism. */ 1162 if (have_vcpu_info_placement && !xen_pvh_domain()) { 1163 pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct); 1164 pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct); 1165 pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct); 1166 pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(xen_irq_enable_direct); 1167 pv_mmu_ops.read_cr2 = xen_read_cr2_direct; 1168 } 1169 } 1170 1171 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf, 1172 unsigned long addr, unsigned len) 1173 { 1174 char *start, *end, *reloc; 1175 unsigned ret; 1176 1177 start = end = reloc = NULL; 1178 1179 #define SITE(op, x) \ 1180 case PARAVIRT_PATCH(op.x): \ 1181 if (have_vcpu_info_placement) { \ 1182 start = (char *)xen_##x##_direct; \ 1183 end = xen_##x##_direct_end; \ 1184 reloc = xen_##x##_direct_reloc; \ 1185 } \ 1186 goto patch_site 1187 1188 switch (type) { 1189 SITE(pv_irq_ops, irq_enable); 1190 SITE(pv_irq_ops, irq_disable); 1191 SITE(pv_irq_ops, save_fl); 1192 SITE(pv_irq_ops, restore_fl); 1193 #undef SITE 1194 1195 patch_site: 1196 if (start == NULL || (end-start) > len) 1197 goto default_patch; 1198 1199 ret = paravirt_patch_insns(insnbuf, len, start, end); 1200 1201 /* Note: because reloc is assigned from something that 1202 appears to be an array, gcc assumes it's non-null, 1203 but doesn't know its relationship with start and 1204 end. */ 1205 if (reloc > start && reloc < end) { 1206 int reloc_off = reloc - start; 1207 long *relocp = (long *)(insnbuf + reloc_off); 1208 long delta = start - (char *)addr; 1209 1210 *relocp += delta; 1211 } 1212 break; 1213 1214 default_patch: 1215 default: 1216 ret = paravirt_patch_default(type, clobbers, insnbuf, 1217 addr, len); 1218 break; 1219 } 1220 1221 return ret; 1222 } 1223 1224 static const struct pv_info xen_info __initconst = { 1225 .paravirt_enabled = 1, 1226 .shared_kernel_pmd = 0, 1227 1228 #ifdef CONFIG_X86_64 1229 .extra_user_64bit_cs = FLAT_USER_CS64, 1230 #endif 1231 1232 .name = "Xen", 1233 }; 1234 1235 static const struct pv_init_ops xen_init_ops __initconst = { 1236 .patch = xen_patch, 1237 }; 1238 1239 static const struct pv_cpu_ops xen_cpu_ops __initconst = { 1240 .cpuid = xen_cpuid, 1241 1242 .set_debugreg = xen_set_debugreg, 1243 .get_debugreg = xen_get_debugreg, 1244 1245 .clts = xen_clts, 1246 1247 .read_cr0 = xen_read_cr0, 1248 .write_cr0 = xen_write_cr0, 1249 1250 .read_cr4 = native_read_cr4, 1251 .read_cr4_safe = native_read_cr4_safe, 1252 .write_cr4 = xen_write_cr4, 1253 1254 #ifdef CONFIG_X86_64 1255 .read_cr8 = xen_read_cr8, 1256 .write_cr8 = xen_write_cr8, 1257 #endif 1258 1259 .wbinvd = native_wbinvd, 1260 1261 .read_msr = xen_read_msr_safe, 1262 .write_msr = xen_write_msr_safe, 1263 1264 .read_tsc = native_read_tsc, 1265 .read_pmc = native_read_pmc, 1266 1267 .read_tscp = native_read_tscp, 1268 1269 .iret = xen_iret, 1270 .irq_enable_sysexit = xen_sysexit, 1271 #ifdef CONFIG_X86_64 1272 .usergs_sysret32 = xen_sysret32, 1273 .usergs_sysret64 = xen_sysret64, 1274 #endif 1275 1276 .load_tr_desc = paravirt_nop, 1277 .set_ldt = xen_set_ldt, 1278 .load_gdt = xen_load_gdt, 1279 .load_idt = xen_load_idt, 1280 .load_tls = xen_load_tls, 1281 #ifdef CONFIG_X86_64 1282 .load_gs_index = xen_load_gs_index, 1283 #endif 1284 1285 .alloc_ldt = xen_alloc_ldt, 1286 .free_ldt = xen_free_ldt, 1287 1288 .store_idt = native_store_idt, 1289 .store_tr = xen_store_tr, 1290 1291 .write_ldt_entry = xen_write_ldt_entry, 1292 .write_gdt_entry = xen_write_gdt_entry, 1293 .write_idt_entry = xen_write_idt_entry, 1294 .load_sp0 = xen_load_sp0, 1295 1296 .set_iopl_mask = xen_set_iopl_mask, 1297 .io_delay = xen_io_delay, 1298 1299 /* Xen takes care of %gs when switching to usermode for us */ 1300 .swapgs = paravirt_nop, 1301 1302 .start_context_switch = paravirt_start_context_switch, 1303 .end_context_switch = xen_end_context_switch, 1304 }; 1305 1306 static const struct pv_apic_ops xen_apic_ops __initconst = { 1307 #ifdef CONFIG_X86_LOCAL_APIC 1308 .startup_ipi_hook = paravirt_nop, 1309 #endif 1310 }; 1311 1312 static void xen_reboot(int reason) 1313 { 1314 struct sched_shutdown r = { .reason = reason }; 1315 1316 if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) 1317 BUG(); 1318 } 1319 1320 static void xen_restart(char *msg) 1321 { 1322 xen_reboot(SHUTDOWN_reboot); 1323 } 1324 1325 static void xen_emergency_restart(void) 1326 { 1327 xen_reboot(SHUTDOWN_reboot); 1328 } 1329 1330 static void xen_machine_halt(void) 1331 { 1332 xen_reboot(SHUTDOWN_poweroff); 1333 } 1334 1335 static void xen_machine_power_off(void) 1336 { 1337 if (pm_power_off) 1338 pm_power_off(); 1339 xen_reboot(SHUTDOWN_poweroff); 1340 } 1341 1342 static void xen_crash_shutdown(struct pt_regs *regs) 1343 { 1344 xen_reboot(SHUTDOWN_crash); 1345 } 1346 1347 static int 1348 xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) 1349 { 1350 xen_reboot(SHUTDOWN_crash); 1351 return NOTIFY_DONE; 1352 } 1353 1354 static struct notifier_block xen_panic_block = { 1355 .notifier_call= xen_panic_event, 1356 .priority = INT_MIN 1357 }; 1358 1359 int xen_panic_handler_init(void) 1360 { 1361 atomic_notifier_chain_register(&panic_notifier_list, &xen_panic_block); 1362 return 0; 1363 } 1364 1365 static const struct machine_ops xen_machine_ops __initconst = { 1366 .restart = xen_restart, 1367 .halt = xen_machine_halt, 1368 .power_off = xen_machine_power_off, 1369 .shutdown = xen_machine_halt, 1370 .crash_shutdown = xen_crash_shutdown, 1371 .emergency_restart = xen_emergency_restart, 1372 }; 1373 1374 static unsigned char xen_get_nmi_reason(void) 1375 { 1376 unsigned char reason = 0; 1377 1378 /* Construct a value which looks like it came from port 0x61. */ 1379 if (test_bit(_XEN_NMIREASON_io_error, 1380 &HYPERVISOR_shared_info->arch.nmi_reason)) 1381 reason |= NMI_REASON_IOCHK; 1382 if (test_bit(_XEN_NMIREASON_pci_serr, 1383 &HYPERVISOR_shared_info->arch.nmi_reason)) 1384 reason |= NMI_REASON_SERR; 1385 1386 return reason; 1387 } 1388 1389 static void __init xen_boot_params_init_edd(void) 1390 { 1391 #if IS_ENABLED(CONFIG_EDD) 1392 struct xen_platform_op op; 1393 struct edd_info *edd_info; 1394 u32 *mbr_signature; 1395 unsigned nr; 1396 int ret; 1397 1398 edd_info = boot_params.eddbuf; 1399 mbr_signature = boot_params.edd_mbr_sig_buffer; 1400 1401 op.cmd = XENPF_firmware_info; 1402 1403 op.u.firmware_info.type = XEN_FW_DISK_INFO; 1404 for (nr = 0; nr < EDDMAXNR; nr++) { 1405 struct edd_info *info = edd_info + nr; 1406 1407 op.u.firmware_info.index = nr; 1408 info->params.length = sizeof(info->params); 1409 set_xen_guest_handle(op.u.firmware_info.u.disk_info.edd_params, 1410 &info->params); 1411 ret = HYPERVISOR_dom0_op(&op); 1412 if (ret) 1413 break; 1414 1415 #define C(x) info->x = op.u.firmware_info.u.disk_info.x 1416 C(device); 1417 C(version); 1418 C(interface_support); 1419 C(legacy_max_cylinder); 1420 C(legacy_max_head); 1421 C(legacy_sectors_per_track); 1422 #undef C 1423 } 1424 boot_params.eddbuf_entries = nr; 1425 1426 op.u.firmware_info.type = XEN_FW_DISK_MBR_SIGNATURE; 1427 for (nr = 0; nr < EDD_MBR_SIG_MAX; nr++) { 1428 op.u.firmware_info.index = nr; 1429 ret = HYPERVISOR_dom0_op(&op); 1430 if (ret) 1431 break; 1432 mbr_signature[nr] = op.u.firmware_info.u.disk_mbr_signature.mbr_signature; 1433 } 1434 boot_params.edd_mbr_sig_buf_entries = nr; 1435 #endif 1436 } 1437 1438 /* 1439 * Set up the GDT and segment registers for -fstack-protector. Until 1440 * we do this, we have to be careful not to call any stack-protected 1441 * function, which is most of the kernel. 1442 * 1443 * Note, that it is __ref because the only caller of this after init 1444 * is PVH which is not going to use xen_load_gdt_boot or other 1445 * __init functions. 1446 */ 1447 static void __ref xen_setup_gdt(int cpu) 1448 { 1449 if (xen_feature(XENFEAT_auto_translated_physmap)) { 1450 #ifdef CONFIG_X86_64 1451 unsigned long dummy; 1452 1453 load_percpu_segment(cpu); /* We need to access per-cpu area */ 1454 switch_to_new_gdt(cpu); /* GDT and GS set */ 1455 1456 /* We are switching of the Xen provided GDT to our HVM mode 1457 * GDT. The new GDT has __KERNEL_CS with CS.L = 1 1458 * and we are jumping to reload it. 1459 */ 1460 asm volatile ("pushq %0\n" 1461 "leaq 1f(%%rip),%0\n" 1462 "pushq %0\n" 1463 "lretq\n" 1464 "1:\n" 1465 : "=&r" (dummy) : "0" (__KERNEL_CS)); 1466 1467 /* 1468 * While not needed, we also set the %es, %ds, and %fs 1469 * to zero. We don't care about %ss as it is NULL. 1470 * Strictly speaking this is not needed as Xen zeros those 1471 * out (and also MSR_FS_BASE, MSR_GS_BASE, MSR_KERNEL_GS_BASE) 1472 * 1473 * Linux zeros them in cpu_init() and in secondary_startup_64 1474 * (for BSP). 1475 */ 1476 loadsegment(es, 0); 1477 loadsegment(ds, 0); 1478 loadsegment(fs, 0); 1479 #else 1480 /* PVH: TODO Implement. */ 1481 BUG(); 1482 #endif 1483 return; /* PVH does not need any PV GDT ops. */ 1484 } 1485 pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot; 1486 pv_cpu_ops.load_gdt = xen_load_gdt_boot; 1487 1488 setup_stack_canary_segment(0); 1489 switch_to_new_gdt(0); 1490 1491 pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry; 1492 pv_cpu_ops.load_gdt = xen_load_gdt; 1493 } 1494 1495 #ifdef CONFIG_XEN_PVH 1496 /* 1497 * A PV guest starts with default flags that are not set for PVH, set them 1498 * here asap. 1499 */ 1500 static void xen_pvh_set_cr_flags(int cpu) 1501 { 1502 1503 /* Some of these are setup in 'secondary_startup_64'. The others: 1504 * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests 1505 * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */ 1506 write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM); 1507 1508 if (!cpu) 1509 return; 1510 /* 1511 * For BSP, PSE PGE are set in probe_page_size_mask(), for APs 1512 * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init. 1513 */ 1514 if (cpu_has_pse) 1515 cr4_set_bits_and_update_boot(X86_CR4_PSE); 1516 1517 if (cpu_has_pge) 1518 cr4_set_bits_and_update_boot(X86_CR4_PGE); 1519 } 1520 1521 /* 1522 * Note, that it is ref - because the only caller of this after init 1523 * is PVH which is not going to use xen_load_gdt_boot or other 1524 * __init functions. 1525 */ 1526 void __ref xen_pvh_secondary_vcpu_init(int cpu) 1527 { 1528 xen_setup_gdt(cpu); 1529 xen_pvh_set_cr_flags(cpu); 1530 } 1531 1532 static void __init xen_pvh_early_guest_init(void) 1533 { 1534 if (!xen_feature(XENFEAT_auto_translated_physmap)) 1535 return; 1536 1537 if (!xen_feature(XENFEAT_hvm_callback_vector)) 1538 return; 1539 1540 xen_have_vector_callback = 1; 1541 1542 xen_pvh_early_cpu_init(0, false); 1543 xen_pvh_set_cr_flags(0); 1544 1545 #ifdef CONFIG_X86_32 1546 BUG(); /* PVH: Implement proper support. */ 1547 #endif 1548 } 1549 #endif /* CONFIG_XEN_PVH */ 1550 1551 /* First C function to be called on Xen boot */ 1552 asmlinkage __visible void __init xen_start_kernel(void) 1553 { 1554 struct physdev_set_iopl set_iopl; 1555 unsigned long initrd_start = 0; 1556 int rc; 1557 1558 if (!xen_start_info) 1559 return; 1560 1561 xen_domain_type = XEN_PV_DOMAIN; 1562 1563 xen_setup_features(); 1564 #ifdef CONFIG_XEN_PVH 1565 xen_pvh_early_guest_init(); 1566 #endif 1567 xen_setup_machphys_mapping(); 1568 1569 /* Install Xen paravirt ops */ 1570 pv_info = xen_info; 1571 pv_init_ops = xen_init_ops; 1572 pv_apic_ops = xen_apic_ops; 1573 if (!xen_pvh_domain()) { 1574 pv_cpu_ops = xen_cpu_ops; 1575 1576 x86_platform.get_nmi_reason = xen_get_nmi_reason; 1577 } 1578 1579 if (xen_feature(XENFEAT_auto_translated_physmap)) 1580 x86_init.resources.memory_setup = xen_auto_xlated_memory_setup; 1581 else 1582 x86_init.resources.memory_setup = xen_memory_setup; 1583 x86_init.oem.arch_setup = xen_arch_setup; 1584 x86_init.oem.banner = xen_banner; 1585 1586 xen_init_time_ops(); 1587 1588 /* 1589 * Set up some pagetable state before starting to set any ptes. 1590 */ 1591 1592 xen_init_mmu_ops(); 1593 1594 /* Prevent unwanted bits from being set in PTEs. */ 1595 __supported_pte_mask &= ~_PAGE_GLOBAL; 1596 1597 /* 1598 * Prevent page tables from being allocated in highmem, even 1599 * if CONFIG_HIGHPTE is enabled. 1600 */ 1601 __userpte_alloc_gfp &= ~__GFP_HIGHMEM; 1602 1603 /* Work out if we support NX */ 1604 x86_configure_nx(); 1605 1606 /* Get mfn list */ 1607 xen_build_dynamic_phys_to_machine(); 1608 1609 /* 1610 * Set up kernel GDT and segment registers, mainly so that 1611 * -fstack-protector code can be executed. 1612 */ 1613 xen_setup_gdt(0); 1614 1615 xen_init_irq_ops(); 1616 xen_init_cpuid_mask(); 1617 1618 #ifdef CONFIG_X86_LOCAL_APIC 1619 /* 1620 * set up the basic apic ops. 1621 */ 1622 set_xen_basic_apic_ops(); 1623 #endif 1624 1625 if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { 1626 pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; 1627 pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; 1628 } 1629 1630 machine_ops = xen_machine_ops; 1631 1632 /* 1633 * The only reliable way to retain the initial address of the 1634 * percpu gdt_page is to remember it here, so we can go and 1635 * mark it RW later, when the initial percpu area is freed. 1636 */ 1637 xen_initial_gdt = &per_cpu(gdt_page, 0); 1638 1639 xen_smp_init(); 1640 1641 #ifdef CONFIG_ACPI_NUMA 1642 /* 1643 * The pages we from Xen are not related to machine pages, so 1644 * any NUMA information the kernel tries to get from ACPI will 1645 * be meaningless. Prevent it from trying. 1646 */ 1647 acpi_numa = -1; 1648 #endif 1649 /* Don't do the full vcpu_info placement stuff until we have a 1650 possible map and a non-dummy shared_info. */ 1651 per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; 1652 1653 local_irq_disable(); 1654 early_boot_irqs_disabled = true; 1655 1656 xen_raw_console_write("mapping kernel into physical memory\n"); 1657 xen_setup_kernel_pagetable((pgd_t *)xen_start_info->pt_base, xen_start_info->nr_pages); 1658 1659 /* 1660 * Modify the cache mode translation tables to match Xen's PAT 1661 * configuration. 1662 */ 1663 1664 pat_init_cache_modes(); 1665 1666 /* keep using Xen gdt for now; no urgent need to change it */ 1667 1668 #ifdef CONFIG_X86_32 1669 pv_info.kernel_rpl = 1; 1670 if (xen_feature(XENFEAT_supervisor_mode_kernel)) 1671 pv_info.kernel_rpl = 0; 1672 #else 1673 pv_info.kernel_rpl = 0; 1674 #endif 1675 /* set the limit of our address space */ 1676 xen_reserve_top(); 1677 1678 /* PVH: runs at default kernel iopl of 0 */ 1679 if (!xen_pvh_domain()) { 1680 /* 1681 * We used to do this in xen_arch_setup, but that is too late 1682 * on AMD were early_cpu_init (run before ->arch_setup()) calls 1683 * early_amd_init which pokes 0xcf8 port. 1684 */ 1685 set_iopl.iopl = 1; 1686 rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); 1687 if (rc != 0) 1688 xen_raw_printk("physdev_op failed %d\n", rc); 1689 } 1690 1691 #ifdef CONFIG_X86_32 1692 /* set up basic CPUID stuff */ 1693 cpu_detect(&new_cpu_data); 1694 set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU); 1695 new_cpu_data.wp_works_ok = 1; 1696 new_cpu_data.x86_capability[0] = cpuid_edx(1); 1697 #endif 1698 1699 if (xen_start_info->mod_start) { 1700 if (xen_start_info->flags & SIF_MOD_START_PFN) 1701 initrd_start = PFN_PHYS(xen_start_info->mod_start); 1702 else 1703 initrd_start = __pa(xen_start_info->mod_start); 1704 } 1705 1706 /* Poke various useful things into boot_params */ 1707 boot_params.hdr.type_of_loader = (9 << 4) | 0; 1708 boot_params.hdr.ramdisk_image = initrd_start; 1709 boot_params.hdr.ramdisk_size = xen_start_info->mod_len; 1710 boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line); 1711 1712 if (!xen_initial_domain()) { 1713 add_preferred_console("xenboot", 0, NULL); 1714 add_preferred_console("tty", 0, NULL); 1715 add_preferred_console("hvc", 0, NULL); 1716 if (pci_xen) 1717 x86_init.pci.arch_init = pci_xen_init; 1718 } else { 1719 const struct dom0_vga_console_info *info = 1720 (void *)((char *)xen_start_info + 1721 xen_start_info->console.dom0.info_off); 1722 struct xen_platform_op op = { 1723 .cmd = XENPF_firmware_info, 1724 .interface_version = XENPF_INTERFACE_VERSION, 1725 .u.firmware_info.type = XEN_FW_KBD_SHIFT_FLAGS, 1726 }; 1727 1728 xen_init_vga(info, xen_start_info->console.dom0.info_size); 1729 xen_start_info->console.domU.mfn = 0; 1730 xen_start_info->console.domU.evtchn = 0; 1731 1732 if (HYPERVISOR_dom0_op(&op) == 0) 1733 boot_params.kbd_status = op.u.firmware_info.u.kbd_shift_flags; 1734 1735 xen_init_apic(); 1736 1737 /* Make sure ACS will be enabled */ 1738 pci_request_acs(); 1739 1740 xen_acpi_sleep_register(); 1741 1742 /* Avoid searching for BIOS MP tables */ 1743 x86_init.mpparse.find_smp_config = x86_init_noop; 1744 x86_init.mpparse.get_smp_config = x86_init_uint_noop; 1745 1746 xen_boot_params_init_edd(); 1747 } 1748 #ifdef CONFIG_PCI 1749 /* PCI BIOS service won't work from a PV guest. */ 1750 pci_probe &= ~PCI_PROBE_BIOS; 1751 #endif 1752 xen_raw_console_write("about to get started...\n"); 1753 1754 xen_setup_runstate_info(0); 1755 1756 xen_efi_init(); 1757 1758 /* Start the world */ 1759 #ifdef CONFIG_X86_32 1760 i386_start_kernel(); 1761 #else 1762 cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */ 1763 x86_64_start_reservations((char *)__pa_symbol(&boot_params)); 1764 #endif 1765 } 1766 1767 void __ref xen_hvm_init_shared_info(void) 1768 { 1769 int cpu; 1770 struct xen_add_to_physmap xatp; 1771 static struct shared_info *shared_info_page = 0; 1772 1773 if (!shared_info_page) 1774 shared_info_page = (struct shared_info *) 1775 extend_brk(PAGE_SIZE, PAGE_SIZE); 1776 xatp.domid = DOMID_SELF; 1777 xatp.idx = 0; 1778 xatp.space = XENMAPSPACE_shared_info; 1779 xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; 1780 if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) 1781 BUG(); 1782 1783 HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; 1784 1785 /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info 1786 * page, we use it in the event channel upcall and in some pvclock 1787 * related functions. We don't need the vcpu_info placement 1788 * optimizations because we don't use any pv_mmu or pv_irq op on 1789 * HVM. 1790 * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is 1791 * online but xen_hvm_init_shared_info is run at resume time too and 1792 * in that case multiple vcpus might be online. */ 1793 for_each_online_cpu(cpu) { 1794 /* Leave it to be NULL. */ 1795 if (cpu >= MAX_VIRT_CPUS) 1796 continue; 1797 per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; 1798 } 1799 } 1800 1801 #ifdef CONFIG_XEN_PVHVM 1802 static void __init init_hvm_pv_info(void) 1803 { 1804 int major, minor; 1805 uint32_t eax, ebx, ecx, edx, pages, msr, base; 1806 u64 pfn; 1807 1808 base = xen_cpuid_base(); 1809 cpuid(base + 1, &eax, &ebx, &ecx, &edx); 1810 1811 major = eax >> 16; 1812 minor = eax & 0xffff; 1813 printk(KERN_INFO "Xen version %d.%d.\n", major, minor); 1814 1815 cpuid(base + 2, &pages, &msr, &ecx, &edx); 1816 1817 pfn = __pa(hypercall_page); 1818 wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32)); 1819 1820 xen_setup_features(); 1821 1822 pv_info.name = "Xen HVM"; 1823 1824 xen_domain_type = XEN_HVM_DOMAIN; 1825 } 1826 1827 static int xen_hvm_cpu_notify(struct notifier_block *self, unsigned long action, 1828 void *hcpu) 1829 { 1830 int cpu = (long)hcpu; 1831 switch (action) { 1832 case CPU_UP_PREPARE: 1833 xen_vcpu_setup(cpu); 1834 if (xen_have_vector_callback) { 1835 if (xen_feature(XENFEAT_hvm_safe_pvclock)) 1836 xen_setup_timer(cpu); 1837 } 1838 break; 1839 default: 1840 break; 1841 } 1842 return NOTIFY_OK; 1843 } 1844 1845 static struct notifier_block xen_hvm_cpu_notifier = { 1846 .notifier_call = xen_hvm_cpu_notify, 1847 }; 1848 1849 static void __init xen_hvm_guest_init(void) 1850 { 1851 init_hvm_pv_info(); 1852 1853 xen_hvm_init_shared_info(); 1854 1855 xen_panic_handler_init(); 1856 1857 if (xen_feature(XENFEAT_hvm_callback_vector)) 1858 xen_have_vector_callback = 1; 1859 xen_hvm_smp_init(); 1860 register_cpu_notifier(&xen_hvm_cpu_notifier); 1861 xen_unplug_emulated_devices(); 1862 x86_init.irqs.intr_init = xen_init_IRQ; 1863 xen_hvm_init_time_ops(); 1864 xen_hvm_init_mmu_ops(); 1865 } 1866 1867 static bool xen_nopv = false; 1868 static __init int xen_parse_nopv(char *arg) 1869 { 1870 xen_nopv = true; 1871 return 0; 1872 } 1873 early_param("xen_nopv", xen_parse_nopv); 1874 1875 static uint32_t __init xen_hvm_platform(void) 1876 { 1877 if (xen_nopv) 1878 return 0; 1879 1880 if (xen_pv_domain()) 1881 return 0; 1882 1883 return xen_cpuid_base(); 1884 } 1885 1886 bool xen_hvm_need_lapic(void) 1887 { 1888 if (xen_nopv) 1889 return false; 1890 if (xen_pv_domain()) 1891 return false; 1892 if (!xen_hvm_domain()) 1893 return false; 1894 if (xen_feature(XENFEAT_hvm_pirqs) && xen_have_vector_callback) 1895 return false; 1896 return true; 1897 } 1898 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic); 1899 1900 const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = { 1901 .name = "Xen HVM", 1902 .detect = xen_hvm_platform, 1903 .init_platform = xen_hvm_guest_init, 1904 .x2apic_available = xen_x2apic_para_available, 1905 }; 1906 EXPORT_SYMBOL(x86_hyper_xen_hvm); 1907 #endif 1908