1 /* 2 * Freescale Lite5200 board support 3 * 4 * Written by: Grant Likely <grant.likely@secretlab.ca> 5 * 6 * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved. 7 * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. 8 * 9 * Description: 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the 12 * Free Software Foundation; either version 2 of the License, or (at your 13 * option) any later version. 14 */ 15 16 #undef DEBUG 17 18 #include <linux/stddef.h> 19 #include <linux/kernel.h> 20 #include <linux/init.h> 21 #include <linux/errno.h> 22 #include <linux/reboot.h> 23 #include <linux/pci.h> 24 #include <linux/kdev_t.h> 25 #include <linux/major.h> 26 #include <linux/console.h> 27 #include <linux/delay.h> 28 #include <linux/seq_file.h> 29 #include <linux/root_dev.h> 30 #include <linux/initrd.h> 31 32 #include <asm/system.h> 33 #include <asm/atomic.h> 34 #include <asm/time.h> 35 #include <asm/io.h> 36 #include <asm/machdep.h> 37 #include <asm/ipic.h> 38 #include <asm/bootinfo.h> 39 #include <asm/irq.h> 40 #include <asm/prom.h> 41 #include <asm/udbg.h> 42 #include <sysdev/fsl_soc.h> 43 #include <asm/of_platform.h> 44 45 #include <asm/mpc52xx.h> 46 47 /* ************************************************************************ 48 * 49 * Setup the architecture 50 * 51 */ 52 53 static void __init 54 lite5200_setup_cpu(void) 55 { 56 struct mpc52xx_gpio __iomem *gpio; 57 u32 port_config; 58 59 /* Map zones */ 60 gpio = mpc52xx_find_and_map("mpc5200-gpio"); 61 if (!gpio) { 62 printk(KERN_ERR __FILE__ ": " 63 "Error while mapping GPIO register for port config. " 64 "Expect some abnormal behavior\n"); 65 goto error; 66 } 67 68 /* Set port config */ 69 port_config = in_be32(&gpio->port_config); 70 71 port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */ 72 73 port_config &= ~0x00007000; /* USB port : Differential mode */ 74 port_config |= 0x00001000; /* USB 1 only */ 75 76 port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */ 77 port_config |= 0x01000000; 78 79 pr_debug("port_config: old:%x new:%x\n", 80 in_be32(&gpio->port_config), port_config); 81 out_be32(&gpio->port_config, port_config); 82 83 /* Unmap zone */ 84 error: 85 iounmap(gpio); 86 } 87 88 static void __init lite5200_setup_arch(void) 89 { 90 struct device_node *np; 91 92 if (ppc_md.progress) 93 ppc_md.progress("lite5200_setup_arch()", 0); 94 95 np = of_find_node_by_type(NULL, "cpu"); 96 if (np) { 97 unsigned int *fp = 98 (int *)get_property(np, "clock-frequency", NULL); 99 if (fp != 0) 100 loops_per_jiffy = *fp / HZ; 101 else 102 loops_per_jiffy = 50000000 / HZ; 103 of_node_put(np); 104 } 105 106 /* CPU & Port mux setup */ 107 mpc52xx_setup_cpu(); /* Generic */ 108 lite5200_setup_cpu(); /* Platorm specific */ 109 110 #ifdef CONFIG_PCI 111 np = of_find_node_by_type(np, "pci"); 112 if (np) 113 mpc52xx_add_bridge(np); 114 #endif 115 116 #ifdef CONFIG_BLK_DEV_INITRD 117 if (initrd_start) 118 ROOT_DEV = Root_RAM0; 119 else 120 #endif 121 #ifdef CONFIG_ROOT_NFS 122 ROOT_DEV = Root_NFS; 123 #else 124 ROOT_DEV = Root_HDA1; 125 #endif 126 127 } 128 129 void lite5200_show_cpuinfo(struct seq_file *m) 130 { 131 struct device_node* np = of_find_all_nodes(NULL); 132 const char *model = NULL; 133 134 if (np) 135 model = get_property(np, "model", NULL); 136 137 seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); 138 seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown"); 139 140 of_node_put(np); 141 } 142 143 /* 144 * Called very early, MMU is off, device-tree isn't unflattened 145 */ 146 static int __init lite5200_probe(void) 147 { 148 unsigned long node = of_get_flat_dt_root(); 149 const char *model = of_get_flat_dt_prop(node, "model", NULL); 150 151 if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && 152 !of_flat_dt_is_compatible(node, "fsl,lite5200b")) 153 return 0; 154 pr_debug("%s board found\n", model ? model : "unknown"); 155 156 return 1; 157 } 158 159 define_machine(lite5200) { 160 .name = "lite5200", 161 .probe = lite5200_probe, 162 .setup_arch = lite5200_setup_arch, 163 .init = mpc52xx_declare_of_platform_devices, 164 .init_IRQ = mpc52xx_init_irq, 165 .get_irq = mpc52xx_get_irq, 166 .show_cpuinfo = lite5200_show_cpuinfo, 167 .calibrate_decr = generic_calibrate_decr, 168 }; 169