1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2024, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8650.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#define PMK8550VE_SID 8 15#include "pm8550ve.dtsi" 16#include "pm8550vs.dtsi" 17#include "pmk8550.dtsi" 18 19/ { 20 model = "Qualcomm Technologies, Inc. SM8650 HDK"; 21 compatible = "qcom,sm8650-hdk", "qcom,sm8650"; 22 chassis-type = "embedded"; 23 24 aliases { 25 serial0 = &uart15; 26 serial1 = &uart14; 27 }; 28 29 chosen { 30 stdout-path = "serial0:115200n8"; 31 }; 32 33 hdmi-out { 34 compatible = "hdmi-connector"; 35 type = "a"; 36 37 port { 38 hdmi_connector_out: endpoint { 39 remote-endpoint = <<9611_out>; 40 }; 41 }; 42 }; 43 44 gpio-keys { 45 compatible = "gpio-keys"; 46 47 pinctrl-0 = <&volume_up_n>; 48 pinctrl-names = "default"; 49 50 key-volume-up { 51 label = "Volume Up"; 52 linux,code = <KEY_VOLUMEUP>; 53 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 54 debounce-interval = <15>; 55 linux,can-disable; 56 wakeup-source; 57 }; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 63 led-0 { 64 function = LED_FUNCTION_BLUETOOTH; 65 color = <LED_COLOR_ID_BLUE>; 66 gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; 67 linux,default-trigger = "bluetooth-power"; 68 default-state = "off"; 69 }; 70 71 led-1 { 72 function = LED_FUNCTION_INDICATOR; 73 color = <LED_COLOR_ID_GREEN>; 74 gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>; 75 default-state = "off"; 76 panic-indicator; 77 }; 78 79 led-2 { 80 function = LED_FUNCTION_WLAN; 81 color = <LED_COLOR_ID_ORANGE>; 82 gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>; 83 linux,default-trigger = "phy0tx"; 84 default-state = "off"; 85 }; 86 }; 87 88 pmic-glink { 89 compatible = "qcom,sm8650-pmic-glink", 90 "qcom,sm8550-pmic-glink", 91 "qcom,pmic-glink"; 92 #address-cells = <1>; 93 #size-cells = <0>; 94 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; 95 96 connector@0 { 97 compatible = "usb-c-connector"; 98 reg = <0>; 99 100 power-role = "dual"; 101 data-role = "dual"; 102 103 ports { 104 #address-cells = <1>; 105 #size-cells = <0>; 106 107 port@0 { 108 reg = <0>; 109 110 pmic_glink_hs_in: endpoint { 111 remote-endpoint = <&usb_1_dwc3_hs>; 112 }; 113 }; 114 115 port@1 { 116 reg = <1>; 117 118 pmic_glink_ss_in: endpoint { 119 remote-endpoint = <&usb_dp_qmpphy_out>; 120 }; 121 }; 122 123 port@2 { 124 reg = <2>; 125 126 pmic_glink_sbu: endpoint { 127 remote-endpoint = <&wcd_usbss_sbu_mux>; 128 }; 129 }; 130 }; 131 }; 132 }; 133 134 lt9611_1v2: regulator-lt9611-1v2 { 135 compatible = "regulator-fixed"; 136 137 regulator-name = "LT9611_1V2"; 138 regulator-min-microvolt = <1200000>; 139 regulator-max-microvolt = <1200000>; 140 141 vin-supply = <&vph_pwr>; 142 gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; 143 144 enable-active-high; 145 }; 146 147 lt9611_3v3: regulator-lt9611-3v3 { 148 compatible = "regulator-fixed"; 149 150 regulator-name = "LT9611_3V3"; 151 regulator-min-microvolt = <3300000>; 152 regulator-max-microvolt = <3300000>; 153 154 vin-supply = <&vreg_bob_3v3>; 155 gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; 156 157 enable-active-high; 158 }; 159 160 sound { 161 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; 162 model = "SM8650-HDK"; 163 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 164 "SpkrRight IN", "WSA_SPK2 OUT", 165 "IN1_HPHL", "HPHL_OUT", 166 "IN2_HPHR", "HPHR_OUT", 167 "AMIC1", "MIC BIAS1", 168 "AMIC2", "MIC BIAS2", 169 "AMIC5", "MIC BIAS4", 170 "TX SWR_INPUT0", "ADC1_OUTPUT", 171 "TX SWR_INPUT1", "ADC2_OUTPUT", 172 "TX SWR_INPUT3", "ADC4_OUTPUT"; 173 174 wcd-playback-dai-link { 175 link-name = "WCD Playback"; 176 177 cpu { 178 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 179 }; 180 181 codec { 182 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 183 }; 184 185 platform { 186 sound-dai = <&q6apm>; 187 }; 188 }; 189 190 wcd-capture-dai-link { 191 link-name = "WCD Capture"; 192 193 cpu { 194 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 195 }; 196 197 codec { 198 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; 199 }; 200 201 platform { 202 sound-dai = <&q6apm>; 203 }; 204 }; 205 206 wsa-dai-link { 207 link-name = "WSA Playback"; 208 209 cpu { 210 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 211 }; 212 213 codec { 214 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 215 }; 216 217 platform { 218 sound-dai = <&q6apm>; 219 }; 220 }; 221 }; 222 223 vph_pwr: regulator-vph-pwr { 224 compatible = "regulator-fixed"; 225 226 regulator-name = "vph_pwr"; 227 regulator-min-microvolt = <3700000>; 228 regulator-max-microvolt = <3700000>; 229 230 regulator-always-on; 231 regulator-boot-on; 232 }; 233 234 vreg_bob_3v3: regulator-vreg-bob-3v3 { 235 compatible = "regulator-fixed"; 236 237 regulator-name = "VREG_BOB_3P3"; 238 regulator-min-microvolt = <3300000>; 239 regulator-max-microvolt = <3300000>; 240 241 vin-supply = <&vph_pwr>; 242 }; 243 244 wcd939x: audio-codec { 245 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; 246 247 pinctrl-0 = <&wcd_default>; 248 pinctrl-names = "default"; 249 250 qcom,micbias1-microvolt = <1800000>; 251 qcom,micbias2-microvolt = <1800000>; 252 qcom,micbias3-microvolt = <1800000>; 253 qcom,micbias4-microvolt = <1800000>; 254 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 255 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 256 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 257 qcom,rx-device = <&wcd_rx>; 258 qcom,tx-device = <&wcd_tx>; 259 260 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 261 262 vdd-buck-supply = <&vreg_l15b_1p8>; 263 vdd-rxtx-supply = <&vreg_l15b_1p8>; 264 vdd-io-supply = <&vreg_l15b_1p8>; 265 vdd-mic-bias-supply = <&vreg_bob1>; 266 267 #sound-dai-cells = <1>; 268 }; 269 270 wcn7850-pmu { 271 compatible = "qcom,wcn7850-pmu"; 272 273 pinctrl-names = "default"; 274 pinctrl-0 = <&wlan_en>, <&bt_default>; 275 276 wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; 277 bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; 278 279 vdd-supply = <&vreg_s4i_0p85>; 280 vddio-supply = <&vreg_l15b_1p8>; 281 vddio1p2-supply = <&vreg_l3c_1p2>; 282 vddaon-supply = <&vreg_s2c_0p8>; 283 vdddig-supply = <&vreg_s3c_0p9>; 284 vddrfa1p2-supply = <&vreg_s1c_1p2>; 285 vddrfa1p8-supply = <&vreg_s6c_1p8>; 286 287 clocks = <&rpmhcc RPMH_RF_CLK1>; 288 289 regulators { 290 vreg_pmu_rfa_cmn: ldo0 { 291 regulator-name = "vreg_pmu_rfa_cmn"; 292 }; 293 294 vreg_pmu_aon_0p59: ldo1 { 295 regulator-name = "vreg_pmu_aon_0p59"; 296 }; 297 298 vreg_pmu_wlcx_0p8: ldo2 { 299 regulator-name = "vreg_pmu_wlcx_0p8"; 300 }; 301 302 vreg_pmu_wlmx_0p85: ldo3 { 303 regulator-name = "vreg_pmu_wlmx_0p85"; 304 }; 305 306 vreg_pmu_btcmx_0p85: ldo4 { 307 regulator-name = "vreg_pmu_btcmx_0p85"; 308 }; 309 310 vreg_pmu_rfa_0p8: ldo5 { 311 regulator-name = "vreg_pmu_rfa_0p8"; 312 }; 313 314 vreg_pmu_rfa_1p2: ldo6 { 315 regulator-name = "vreg_pmu_rfa_1p2"; 316 }; 317 318 vreg_pmu_rfa_1p8: ldo7 { 319 regulator-name = "vreg_pmu_rfa_1p8"; 320 }; 321 322 vreg_pmu_pcie_0p9: ldo8 { 323 regulator-name = "vreg_pmu_pcie_0p9"; 324 }; 325 326 vreg_pmu_pcie_1p8: ldo9 { 327 regulator-name = "vreg_pmu_pcie_1p8"; 328 }; 329 }; 330 }; 331}; 332 333&apps_rsc { 334 regulators-0 { 335 compatible = "qcom,pm8550-rpmh-regulators"; 336 337 vdd-bob1-supply = <&vph_pwr>; 338 vdd-bob2-supply = <&vph_pwr>; 339 vdd-l2-l13-l14-supply = <&vreg_bob1>; 340 vdd-l3-supply = <&vreg_s1c_1p2>; 341 vdd-l5-l16-supply = <&vreg_bob1>; 342 vdd-l6-l7-supply = <&vreg_bob1>; 343 vdd-l8-l9-supply = <&vreg_bob1>; 344 vdd-l11-supply = <&vreg_s1c_1p2>; 345 vdd-l12-supply = <&vreg_s6c_1p8>; 346 vdd-l15-supply = <&vreg_s6c_1p8>; 347 vdd-l17-supply = <&vreg_bob2>; 348 349 qcom,pmic-id = "b"; 350 351 vreg_bob1: bob1 { 352 regulator-name = "vreg_bob1"; 353 regulator-min-microvolt = <3296000>; 354 regulator-max-microvolt = <3960000>; 355 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 356 }; 357 358 vreg_bob2: bob2 { 359 regulator-name = "vreg_bob2"; 360 regulator-min-microvolt = <2720000>; 361 regulator-max-microvolt = <3008000>; 362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 363 }; 364 365 vreg_l2b_3p0: ldo2 { 366 regulator-name = "vreg_l2b_3p0"; 367 regulator-min-microvolt = <3008000>; 368 regulator-max-microvolt = <3008000>; 369 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 370 regulator-allow-set-load; 371 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 372 RPMH_REGULATOR_MODE_HPM>; 373 }; 374 375 vreg_l5b_3p1: ldo5 { 376 regulator-name = "vreg_l5b_3p1"; 377 regulator-min-microvolt = <3104000>; 378 regulator-max-microvolt = <3104000>; 379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 380 regulator-allow-set-load; 381 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 382 RPMH_REGULATOR_MODE_HPM>; 383 }; 384 385 vreg_l6b_1p8: ldo6 { 386 regulator-name = "vreg_l6b_1p8"; 387 regulator-min-microvolt = <1800000>; 388 regulator-max-microvolt = <3008000>; 389 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 390 regulator-allow-set-load; 391 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 392 RPMH_REGULATOR_MODE_HPM>; 393 }; 394 395 vreg_l7b_1p8: ldo7 { 396 regulator-name = "vreg_l7b_1p8"; 397 regulator-min-microvolt = <1800000>; 398 regulator-max-microvolt = <3008000>; 399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 400 }; 401 402 vreg_l8b_1p8: ldo8 { 403 regulator-name = "vreg_l8b_1p8"; 404 regulator-min-microvolt = <1800000>; 405 regulator-max-microvolt = <3008000>; 406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 407 regulator-allow-set-load; 408 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 409 RPMH_REGULATOR_MODE_HPM>; 410 }; 411 412 vreg_l9b_2p9: ldo9 { 413 regulator-name = "vreg_l9b_2p9"; 414 regulator-min-microvolt = <2960000>; 415 regulator-max-microvolt = <3008000>; 416 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 417 regulator-allow-set-load; 418 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 419 RPMH_REGULATOR_MODE_HPM>; 420 }; 421 422 vreg_l11b_1p2: ldo11 { 423 regulator-name = "vreg_l11b_1p2"; 424 regulator-min-microvolt = <1200000>; 425 regulator-max-microvolt = <1504000>; 426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 427 regulator-allow-set-load; 428 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 429 RPMH_REGULATOR_MODE_HPM>; 430 }; 431 432 vreg_l12b_1p8: ldo12 { 433 regulator-name = "vreg_l12b_1p8"; 434 regulator-min-microvolt = <1800000>; 435 regulator-max-microvolt = <1800000>; 436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 437 regulator-allow-set-load; 438 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 439 RPMH_REGULATOR_MODE_HPM>; 440 }; 441 442 vreg_l13b_3p0: ldo13 { 443 regulator-name = "vreg_l13b_3p0"; 444 regulator-min-microvolt = <3000000>; 445 regulator-max-microvolt = <3000000>; 446 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 447 regulator-allow-set-load; 448 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 449 RPMH_REGULATOR_MODE_HPM>; 450 }; 451 452 vreg_l14b_3p2: ldo14 { 453 regulator-name = "vreg_l14b_3p2"; 454 regulator-min-microvolt = <3200000>; 455 regulator-max-microvolt = <3200000>; 456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 457 regulator-allow-set-load; 458 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 459 RPMH_REGULATOR_MODE_HPM>; 460 }; 461 462 vreg_l15b_1p8: ldo15 { 463 regulator-name = "vreg_l15b_1p8"; 464 regulator-min-microvolt = <1800000>; 465 regulator-max-microvolt = <1800000>; 466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 467 regulator-allow-set-load; 468 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 469 RPMH_REGULATOR_MODE_HPM>; 470 }; 471 472 vreg_l16b_2p8: ldo16 { 473 regulator-name = "vreg_l16b_2p8"; 474 regulator-min-microvolt = <2800000>; 475 regulator-max-microvolt = <2800000>; 476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 477 regulator-allow-set-load; 478 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 479 RPMH_REGULATOR_MODE_HPM>; 480 }; 481 482 vreg_l17b_2p5: ldo17 { 483 regulator-name = "vreg_l17b_2p5"; 484 regulator-min-microvolt = <2504000>; 485 regulator-max-microvolt = <2504000>; 486 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 487 regulator-allow-set-load; 488 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 489 RPMH_REGULATOR_MODE_HPM>; 490 }; 491 }; 492 493 regulators-1 { 494 compatible = "qcom,pm8550vs-rpmh-regulators"; 495 496 vdd-l1-supply = <&vreg_s1c_1p2>; 497 vdd-l2-supply = <&vreg_s1c_1p2>; 498 vdd-l3-supply = <&vreg_s1c_1p2>; 499 vdd-s1-supply = <&vph_pwr>; 500 vdd-s2-supply = <&vph_pwr>; 501 vdd-s3-supply = <&vph_pwr>; 502 vdd-s4-supply = <&vph_pwr>; 503 vdd-s5-supply = <&vph_pwr>; 504 vdd-s6-supply = <&vph_pwr>; 505 506 qcom,pmic-id = "c"; 507 508 vreg_s1c_1p2: smps1 { 509 regulator-name = "vreg_s1c_1p2"; 510 regulator-min-microvolt = <1256000>; 511 regulator-max-microvolt = <1348000>; 512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 513 }; 514 515 vreg_s2c_0p8: smps2 { 516 regulator-name = "vreg_s2c_0p8"; 517 regulator-min-microvolt = <852000>; 518 regulator-max-microvolt = <1036000>; 519 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 520 }; 521 522 vreg_s3c_0p9: smps3 { 523 regulator-name = "vreg_s3c_0p9"; 524 regulator-min-microvolt = <976000>; 525 regulator-max-microvolt = <1064000>; 526 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 527 }; 528 529 vreg_s4c_1p2: smps4 { 530 regulator-name = "vreg_s4c_1p2"; 531 regulator-min-microvolt = <1224000>; 532 regulator-max-microvolt = <1280000>; 533 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 534 }; 535 536 vreg_s5c_0p7: smps5 { 537 regulator-name = "vreg_s5c_0p7"; 538 regulator-min-microvolt = <752000>; 539 regulator-max-microvolt = <900000>; 540 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 541 }; 542 543 vreg_s6c_1p8: smps6 { 544 regulator-name = "vreg_s6c_1p8"; 545 regulator-min-microvolt = <1856000>; 546 regulator-max-microvolt = <2000000>; 547 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 548 }; 549 550 vreg_l1c_1p2: ldo1 { 551 regulator-name = "vreg_l1c_1p2"; 552 regulator-min-microvolt = <1200000>; 553 regulator-max-microvolt = <1200000>; 554 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 555 regulator-allow-set-load; 556 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 557 RPMH_REGULATOR_MODE_HPM>; 558 }; 559 560 vreg_l3c_1p2: ldo3 { 561 regulator-name = "vreg_l3c_1p2"; 562 regulator-min-microvolt = <1200000>; 563 regulator-max-microvolt = <1200000>; 564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 565 regulator-allow-set-load; 566 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 567 RPMH_REGULATOR_MODE_HPM>; 568 }; 569 }; 570 571 regulators-2 { 572 compatible = "qcom,pm8550vs-rpmh-regulators"; 573 574 vdd-l1-supply = <&vreg_s3c_0p9>; 575 576 qcom,pmic-id = "d"; 577 578 vreg_l1d_0p88: ldo1 { 579 regulator-name = "vreg_l1d_0p88"; 580 regulator-min-microvolt = <912000>; 581 regulator-max-microvolt = <920000>; 582 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 583 regulator-allow-set-load; 584 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 585 RPMH_REGULATOR_MODE_HPM>; 586 }; 587 }; 588 589 regulators-3 { 590 compatible = "qcom,pm8550vs-rpmh-regulators"; 591 592 vdd-l3-supply = <&vreg_s3c_0p9>; 593 594 qcom,pmic-id = "e"; 595 596 vreg_l3e_0p9: ldo3 { 597 regulator-name = "vreg_l3e_0p9"; 598 regulator-min-microvolt = <880000>; 599 regulator-max-microvolt = <920000>; 600 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 601 regulator-allow-set-load; 602 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 603 RPMH_REGULATOR_MODE_HPM>; 604 }; 605 }; 606 607 regulators-4 { 608 compatible = "qcom,pm8550vs-rpmh-regulators"; 609 610 vdd-l1-supply = <&vreg_s3c_0p9>; 611 vdd-l3-supply = <&vreg_s3c_0p9>; 612 613 qcom,pmic-id = "g"; 614 615 vreg_l1g_0p91: ldo1 { 616 regulator-name = "vreg_l1g_0p91"; 617 regulator-min-microvolt = <912000>; 618 regulator-max-microvolt = <920000>; 619 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 620 regulator-allow-set-load; 621 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 622 RPMH_REGULATOR_MODE_HPM>; 623 }; 624 625 vreg_l3g_0p91: ldo3 { 626 regulator-name = "vreg_l3g_0p91"; 627 regulator-min-microvolt = <880000>; 628 regulator-max-microvolt = <912000>; 629 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 630 regulator-allow-set-load; 631 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 632 RPMH_REGULATOR_MODE_HPM>; 633 }; 634 }; 635 636 regulators-5 { 637 compatible = "qcom,pm8550ve-rpmh-regulators"; 638 639 vdd-l1-supply = <&vreg_s3c_0p9>; 640 vdd-l2-supply = <&vreg_s3c_0p9>; 641 vdd-l3-supply = <&vreg_s1c_1p2>; 642 vdd-s4-supply = <&vph_pwr>; 643 644 qcom,pmic-id = "i"; 645 646 vreg_s4i_0p85: smps4 { 647 regulator-name = "vreg_s4i_0p85"; 648 regulator-min-microvolt = <852000>; 649 regulator-max-microvolt = <1004000>; 650 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 651 }; 652 653 vreg_l1i_0p88: ldo1 { 654 regulator-name = "vreg_l1i_0p88"; 655 regulator-min-microvolt = <880000>; 656 regulator-max-microvolt = <912000>; 657 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 658 regulator-allow-set-load; 659 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 660 RPMH_REGULATOR_MODE_HPM>; 661 }; 662 663 vreg_l2i_0p88: ldo2 { 664 regulator-name = "vreg_l2i_0p88"; 665 regulator-min-microvolt = <880000>; 666 regulator-max-microvolt = <912000>; 667 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 668 regulator-allow-set-load; 669 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 670 RPMH_REGULATOR_MODE_HPM>; 671 }; 672 673 vreg_l3i_1p2: ldo3 { 674 regulator-name = "vreg_l3i_0p91"; 675 regulator-min-microvolt = <1200000>; 676 regulator-max-microvolt = <1200000>; 677 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 678 regulator-allow-set-load; 679 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 680 RPMH_REGULATOR_MODE_HPM>; 681 }; 682 }; 683 684 regulators-6 { 685 compatible = "qcom,pm8010-rpmh-regulators"; 686 qcom,pmic-id = "m"; 687 688 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 689 vdd-l3-l4-supply = <&vreg_bob2>; 690 vdd-l5-supply = <&vreg_s6c_1p8>; 691 vdd-l6-supply = <&vreg_bob1>; 692 vdd-l7-supply = <&vreg_bob1>; 693 694 vreg_l1m_1p1: ldo1 { 695 regulator-name = "vreg_l1m_1p1"; 696 regulator-min-microvolt = <1104000>; 697 regulator-max-microvolt = <1104000>; 698 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 699 regulator-allow-set-load; 700 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 701 RPMH_REGULATOR_MODE_HPM>; 702 }; 703 704 vreg_l2m_1p056: ldo2 { 705 regulator-name = "vreg_l2m_1p056"; 706 regulator-min-microvolt = <1056000>; 707 regulator-max-microvolt = <1056000>; 708 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 709 regulator-allow-set-load; 710 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 711 RPMH_REGULATOR_MODE_HPM>; 712 }; 713 714 vreg_l3m_2p8: ldo3 { 715 regulator-name = "vreg_l3m_2p8"; 716 regulator-min-microvolt = <2800000>; 717 regulator-max-microvolt = <2800000>; 718 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 719 }; 720 721 vreg_l4m_2p8: ldo4 { 722 regulator-name = "vreg_l4m_2p8"; 723 regulator-min-microvolt = <2800000>; 724 regulator-max-microvolt = <2800000>; 725 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 726 }; 727 728 vreg_l5m_1p8: ldo5 { 729 regulator-name = "vreg_l5m_1p8"; 730 regulator-min-microvolt = <1800000>; 731 regulator-max-microvolt = <1800000>; 732 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 733 }; 734 735 vreg_l6m_2p8: ldo6 { 736 regulator-name = "vreg_l6m_2p8"; 737 regulator-min-microvolt = <2800000>; 738 regulator-max-microvolt = <2800000>; 739 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 740 }; 741 742 vreg_l7m_2p96: ldo7 { 743 regulator-name = "vreg_l7m_2p96"; 744 regulator-min-microvolt = <2960000>; 745 regulator-max-microvolt = <2960000>; 746 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 747 }; 748 }; 749 750 regulators-7 { 751 compatible = "qcom,pm8010-rpmh-regulators"; 752 qcom,pmic-id = "n"; 753 754 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 755 vdd-l3-l4-supply = <&vreg_s6c_1p8>; 756 vdd-l5-supply = <&vreg_bob2>; 757 vdd-l6-supply = <&vreg_bob2>; 758 vdd-l7-supply = <&vreg_bob1>; 759 760 vreg_l1n_1p1: ldo1 { 761 regulator-name = "vreg_l1n_1p1"; 762 regulator-min-microvolt = <1104000>; 763 regulator-max-microvolt = <1104000>; 764 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 765 regulator-allow-set-load; 766 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 767 RPMH_REGULATOR_MODE_HPM>; 768 }; 769 770 vreg_l2n_1p056: ldo2 { 771 regulator-name = "vreg_l2n_1p056"; 772 regulator-min-microvolt = <1056000>; 773 regulator-max-microvolt = <1056000>; 774 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 775 regulator-allow-set-load; 776 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 777 RPMH_REGULATOR_MODE_HPM>; 778 }; 779 780 vreg_l3n_1p8: ldo3 { 781 regulator-name = "vreg_l3n_1p8"; 782 regulator-min-microvolt = <1800000>; 783 regulator-max-microvolt = <1800000>; 784 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 785 }; 786 787 vreg_l4n_1p8: ldo4 { 788 regulator-name = "vreg_l4n_1p8"; 789 regulator-min-microvolt = <1800000>; 790 regulator-max-microvolt = <1800000>; 791 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 792 }; 793 794 vreg_l5n_2p8: ldo5 { 795 regulator-name = "vreg_l5n_2p8"; 796 regulator-min-microvolt = <2800000>; 797 regulator-max-microvolt = <2800000>; 798 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 799 }; 800 801 vreg_l6n_2p8: ldo6 { 802 regulator-name = "vreg_l6n_2p8"; 803 regulator-min-microvolt = <2800000>; 804 regulator-max-microvolt = <2800000>; 805 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 806 }; 807 808 vreg_l7n_3p3: ldo7 { 809 regulator-name = "vreg_l7n_3p3"; 810 regulator-min-microvolt = <3304000>; 811 regulator-max-microvolt = <3304000>; 812 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 813 }; 814 }; 815}; 816 817&gpi_dma1 { 818 status = "okay"; 819}; 820 821&i2c3 { 822 status = "okay"; 823 824 wcd_usbss: typec-mux@e { 825 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; 826 reg = <0xe>; 827 828 vdd-supply = <&vreg_l15b_1p8>; 829 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; 830 831 mode-switch; 832 orientation-switch; 833 834 ports { 835 #address-cells = <1>; 836 #size-cells = <0>; 837 838 port@0 { 839 reg = <0>; 840 841 wcd_usbss_sbu_mux: endpoint { 842 remote-endpoint = <&pmic_glink_sbu>; 843 }; 844 }; 845 }; 846 }; 847}; 848 849&i2c6 { 850 clock-frequency = <400000>; 851 status = "okay"; 852 853 lt9611_codec: hdmi-bridge@2b { 854 compatible = "lontium,lt9611uxc"; 855 reg = <0x2b>; 856 857 interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; 858 859 reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; 860 861 vdd-supply = <<9611_1v2>; 862 vcc-supply = <<9611_3v3>; 863 864 pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; 865 pinctrl-names = "default"; 866 867 ports { 868 #address-cells = <1>; 869 #size-cells = <0>; 870 871 port@0 { 872 reg = <0>; 873 874 lt9611_a: endpoint { 875 remote-endpoint = <&mdss_dsi0_out>; 876 }; 877 }; 878 879 port@2 { 880 reg = <2>; 881 882 lt9611_out: endpoint { 883 remote-endpoint = <&hdmi_connector_out>; 884 }; 885 }; 886 }; 887 }; 888}; 889 890&ipa { 891 qcom,gsi-loader = "self"; 892 memory-region = <&ipa_fw_mem>; 893 firmware-name = "qcom/sm8650/ipa_fws.mbn"; 894 status = "okay"; 895}; 896 897&iris { 898 status = "okay"; 899}; 900 901&gpu { 902 status = "okay"; 903 904 zap-shader { 905 firmware-name = "qcom/sm8650/gen70900_zap.mbn"; 906 }; 907}; 908 909&lpass_tlmm { 910 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 911 pins = "gpio21"; 912 function = "gpio"; 913 drive-strength = <16>; 914 bias-disable; 915 output-low; 916 }; 917}; 918 919&mdss { 920 status = "okay"; 921}; 922 923&mdss_dsi0 { 924 vdda-supply = <&vreg_l3i_1p2>; 925 926 status = "okay"; 927}; 928 929&mdss_dsi0_out { 930 remote-endpoint = <<9611_a>; 931 data-lanes = <0 1 2 3>; 932}; 933 934&mdss_dsi0_phy { 935 vdds-supply = <&vreg_l1i_0p88>; 936 937 status = "okay"; 938}; 939 940&mdss_dp0 { 941 status = "okay"; 942}; 943 944&pcie0 { 945 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 946 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 947 948 pinctrl-0 = <&pcie0_default_state>; 949 pinctrl-names = "default"; 950 951 status = "okay"; 952}; 953 954&pcieport0 { 955 wifi@0 { 956 compatible = "pci17cb,1107"; 957 reg = <0x10000 0x0 0x0 0x0 0x0>; 958 959 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 960 vddaon-supply = <&vreg_pmu_aon_0p59>; 961 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 962 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 963 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 964 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 965 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 966 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 967 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 968 }; 969}; 970 971&pcie0_phy { 972 vdda-phy-supply = <&vreg_l1i_0p88>; 973 vdda-pll-supply = <&vreg_l3i_1p2>; 974 975 status = "okay"; 976}; 977 978&pcie1 { 979 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 980 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 981 982 pinctrl-0 = <&pcie1_default_state>; 983 pinctrl-names = "default"; 984 985 status = "okay"; 986}; 987 988&pcie1_phy { 989 vdda-phy-supply = <&vreg_l3e_0p9>; 990 vdda-pll-supply = <&vreg_l3i_1p2>; 991 vdda-qref-supply = <&vreg_l1i_0p88>; 992 993 status = "okay"; 994}; 995 996&pm8550_gpios { 997 sdc2_card_det_n: sdc2-card-det-state { 998 pins = "gpio12"; 999 function = "normal"; 1000 bias-pull-up; 1001 input-enable; 1002 output-disable; 1003 power-source = <1>; /* 1.8 V */ 1004 }; 1005 1006 volume_up_n: volume-up-n-state { 1007 pins = "gpio6"; 1008 function = "normal"; 1009 bias-pull-up; 1010 input-enable; 1011 power-source = <1>; 1012 }; 1013}; 1014 1015/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */ 1016&pm8550_pwm { 1017 #address-cells = <1>; 1018 #size-cells = <0>; 1019 1020 status = "okay"; 1021 1022 led@1 { 1023 reg = <1>; 1024 function = LED_FUNCTION_STATUS; 1025 color = <LED_COLOR_ID_RED>; 1026 default-state = "off"; 1027 }; 1028 1029 led@2 { 1030 reg = <2>; 1031 function = LED_FUNCTION_STATUS; 1032 color = <LED_COLOR_ID_GREEN>; 1033 default-state = "off"; 1034 }; 1035 1036 led@3 { 1037 reg = <3>; 1038 function = LED_FUNCTION_STATUS; 1039 color = <LED_COLOR_ID_BLUE>; 1040 default-state = "off"; 1041 }; 1042}; 1043 1044&pm8550b_eusb2_repeater { 1045 vdd18-supply = <&vreg_l15b_1p8>; 1046 vdd3-supply = <&vreg_l5b_3p1>; 1047}; 1048 1049&pon_pwrkey { 1050 status = "okay"; 1051}; 1052 1053&pon_resin { 1054 linux,code = <KEY_VOLUMEDOWN>; 1055 1056 status = "okay"; 1057}; 1058 1059&qup_i2c3_data_clk { 1060 /* Use internal I2C pull-up */ 1061 bias-pull-up = <2200>; 1062}; 1063 1064&qupv3_id_0 { 1065 iommus = <&apps_smmu 0xa3 0x3>; 1066 1067 status = "okay"; 1068}; 1069 1070&qupv3_id_1 { 1071 status = "okay"; 1072}; 1073 1074&remoteproc_adsp { 1075 firmware-name = "qcom/sm8650/adsp.mbn", 1076 "qcom/sm8650/adsp_dtb.mbn"; 1077 1078 status = "okay"; 1079}; 1080 1081&remoteproc_cdsp { 1082 firmware-name = "qcom/sm8650/cdsp.mbn", 1083 "qcom/sm8650/cdsp_dtb.mbn"; 1084 1085 status = "okay"; 1086}; 1087 1088&remoteproc_mpss { 1089 firmware-name = "qcom/sm8650/modem.mbn", 1090 "qcom/sm8650/modem_dtb.mbn"; 1091 1092 status = "okay"; 1093}; 1094 1095&sdhc_2 { 1096 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; 1097 1098 vmmc-supply = <&vreg_l9b_2p9>; 1099 vqmmc-supply = <&vreg_l8b_1p8>; 1100 bus-width = <4>; 1101 no-sdio; 1102 no-mmc; 1103 1104 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; 1105 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; 1106 pinctrl-names = "default", "sleep"; 1107 1108 status = "okay"; 1109}; 1110 1111&sleep_clk { 1112 clock-frequency = <32764>; 1113}; 1114 1115&swr0 { 1116 status = "okay"; 1117 1118 /* WSA8845, Speaker North */ 1119 north_spkr: speaker@0,0 { 1120 compatible = "sdw20217020400"; 1121 reg = <0 0>; 1122 pinctrl-0 = <&spkr_1_sd_n_active>; 1123 pinctrl-names = "default"; 1124 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; 1125 #sound-dai-cells = <0>; 1126 sound-name-prefix = "SpkrLeft"; 1127 vdd-1p8-supply = <&vreg_l15b_1p8>; 1128 vdd-io-supply = <&vreg_l3c_1p2>; 1129 1130 /* 1131 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) 1132 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) 1133 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) 1134 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1135 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) 1136 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1137 */ 1138 qcom,port-mapping = <1 2 3 7 10 13>; 1139 }; 1140 1141 /* WSA8845, Speaker South */ 1142 south_spkr: speaker@0,1 { 1143 compatible = "sdw20217020400"; 1144 reg = <0 1>; 1145 pinctrl-0 = <&spkr_2_sd_n_active>; 1146 pinctrl-names = "default"; 1147 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; 1148 #sound-dai-cells = <0>; 1149 sound-name-prefix = "SpkrRight"; 1150 vdd-1p8-supply = <&vreg_l15b_1p8>; 1151 vdd-io-supply = <&vreg_l3c_1p2>; 1152 1153 /* 1154 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) 1155 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) 1156 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) 1157 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1158 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) 1159 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1160 */ 1161 qcom,port-mapping = <4 5 6 7 11 13>; 1162 }; 1163}; 1164 1165&swr1 { 1166 status = "okay"; 1167 1168 /* WCD9395 RX */ 1169 wcd_rx: codec@0,4 { 1170 compatible = "sdw20217010e00"; 1171 reg = <0 4>; 1172 1173 /* 1174 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) 1175 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) 1176 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) 1177 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) 1178 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) 1179 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) 1180 */ 1181 qcom,rx-port-mapping = <1 2 3 4 5 9>; 1182 }; 1183}; 1184 1185&swr2 { 1186 status = "okay"; 1187 1188 /* WCD9395 TX */ 1189 wcd_tx: codec@0,3 { 1190 compatible = "sdw20217010e00"; 1191 reg = <0 3>; 1192 1193 /* 1194 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1195 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1196 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) 1197 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) 1198 */ 1199 qcom,tx-port-mapping = <2 2 3 4>; 1200 }; 1201}; 1202 1203&tlmm { 1204 /* Reserved I/Os for NFC */ 1205 gpio-reserved-ranges = <32 8>, <74 1>; 1206 1207 bt_default: bt-default-state { 1208 bt-en-pins { 1209 pins = "gpio17"; 1210 function = "gpio"; 1211 drive-strength = <16>; 1212 bias-disable; 1213 }; 1214 1215 sw-ctrl-pins { 1216 pins = "gpio18"; 1217 function = "gpio"; 1218 bias-pull-down; 1219 }; 1220 }; 1221 1222 lt9611_irq_pin: lt9611-irq-state { 1223 pins = "gpio85"; 1224 function = "gpio"; 1225 bias-disable; 1226 }; 1227 1228 lt9611_rst_pin: lt9611-rst-state { 1229 pins = "gpio28"; 1230 function = "gpio"; 1231 output-high; 1232 }; 1233 1234 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1235 pins = "gpio77"; 1236 function = "gpio"; 1237 drive-strength = <16>; 1238 bias-disable; 1239 output-low; 1240 }; 1241 1242 wcd_default: wcd-reset-n-active-state { 1243 pins = "gpio107"; 1244 function = "gpio"; 1245 drive-strength = <16>; 1246 bias-disable; 1247 output-low; 1248 }; 1249 1250 wlan_en: wlan-en-state { 1251 pins = "gpio16"; 1252 function = "gpio"; 1253 drive-strength = <8>; 1254 bias-pull-down; 1255 }; 1256}; 1257 1258&uart14 { 1259 status = "okay"; 1260 1261 bluetooth { 1262 compatible = "qcom,wcn7850-bt"; 1263 1264 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 1265 vddaon-supply = <&vreg_pmu_aon_0p59>; 1266 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 1267 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 1268 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1269 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1270 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 1271 1272 max-speed = <3200000>; 1273 }; 1274}; 1275 1276&uart15 { 1277 status = "okay"; 1278}; 1279 1280&ufs_mem_hc { 1281 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1282 1283 vcc-supply = <&vreg_l17b_2p5>; 1284 vcc-max-microamp = <1300000>; 1285 vccq-supply = <&vreg_l1c_1p2>; 1286 vccq-max-microamp = <1200000>; 1287 1288 status = "okay"; 1289}; 1290 1291&ufs_mem_phy { 1292 vdda-phy-supply = <&vreg_l1d_0p88>; 1293 vdda-pll-supply = <&vreg_l3i_1p2>; 1294 1295 status = "okay"; 1296}; 1297 1298/* 1299 * DPAUX -> WCD9395 -> USB_SBU -> USB-C 1300 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C 1301 * USB SS -> USB-C 1302 */ 1303 1304&usb_1 { 1305 dr_mode = "otg"; 1306 usb-role-switch; 1307 1308 status = "okay"; 1309}; 1310 1311&usb_1_dwc3_hs { 1312 remote-endpoint = <&pmic_glink_hs_in>; 1313}; 1314 1315&usb_1_hsphy { 1316 vdd-supply = <&vreg_l1i_0p88>; 1317 vdda12-supply = <&vreg_l3i_1p2>; 1318 1319 phys = <&pm8550b_eusb2_repeater>; 1320 1321 status = "okay"; 1322}; 1323 1324&usb_dp_qmpphy { 1325 vdda-phy-supply = <&vreg_l3i_1p2>; 1326 vdda-pll-supply = <&vreg_l3g_0p91>; 1327 1328 status = "okay"; 1329}; 1330 1331&usb_dp_qmpphy_out { 1332 remote-endpoint = <&pmic_glink_ss_in>; 1333}; 1334 1335&xo_board { 1336 clock-frequency = <76800000>; 1337}; 1338