1# 2# For a description of the syntax of this configuration file, 3# see Documentation/kbuild/kconfig-language.txt. 4# 5 6mainmenu "Linux Kernel Configuration" 7 8config ARM 9 bool 10 default y 11 help 12 The ARM series is a line of low-power-consumption RISC chip designs 13 licensed by ARM ltd and targeted at embedded applications and 14 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer 15 manufactured, but legacy ARM-based PC hardware remains popular in 16 Europe. There is an ARM Linux project with a web page at 17 <http://www.arm.linux.org.uk/>. 18 19config MMU 20 bool 21 default y 22 23config EISA 24 bool 25 ---help--- 26 The Extended Industry Standard Architecture (EISA) bus was 27 developed as an open alternative to the IBM MicroChannel bus. 28 29 The EISA bus provided some of the features of the IBM MicroChannel 30 bus while maintaining backward compatibility with cards made for 31 the older ISA bus. The EISA bus saw limited use between 1988 and 32 1995 when it was made obsolete by the PCI bus. 33 34 Say Y here if you are building a kernel for an EISA-based machine. 35 36 Otherwise, say N. 37 38config SBUS 39 bool 40 41config MCA 42 bool 43 help 44 MicroChannel Architecture is found in some IBM PS/2 machines and 45 laptops. It is a bus system similar to PCI or ISA. See 46 <file:Documentation/mca.txt> (and especially the web page given 47 there) before attempting to build an MCA bus kernel. 48 49config UID16 50 bool 51 default y 52 53config RWSEM_GENERIC_SPINLOCK 54 bool 55 default y 56 57config RWSEM_XCHGADD_ALGORITHM 58 bool 59 60config GENERIC_CALIBRATE_DELAY 61 bool 62 default y 63 64config GENERIC_BUST_SPINLOCK 65 bool 66 67config ARCH_MAY_HAVE_PC_FDC 68 bool 69 70config GENERIC_ISA_DMA 71 bool 72 73config FIQ 74 bool 75 76source "init/Kconfig" 77 78menu "System Type" 79 80choice 81 prompt "ARM system type" 82 default ARCH_RPC 83 84config ARCH_CLPS7500 85 bool "Cirrus-CL-PS7500FE" 86 select TIMER_ACORN 87 select ISA 88 89config ARCH_CLPS711X 90 bool "CLPS711x/EP721x-based" 91 92config ARCH_CO285 93 bool "Co-EBSA285" 94 select FOOTBRIDGE 95 select FOOTBRIDGE_ADDIN 96 97config ARCH_EBSA110 98 bool "EBSA-110" 99 select ISA 100 help 101 This is an evaluation board for the StrongARM processor available 102 from Digital. It has limited hardware on-board, including an onboard 103 Ethernet interface, two PCMCIA sockets, two serial ports and a 104 parallel port. 105 106config ARCH_CAMELOT 107 bool "Epxa10db" 108 help 109 This enables support for Altera's Excalibur XA10 development board. 110 If you would like to build your kernel to run on one of these boards 111 then you must say 'Y' here. Otherwise say 'N' 112 113config ARCH_FOOTBRIDGE 114 bool "FootBridge" 115 select FOOTBRIDGE 116 117config ARCH_INTEGRATOR 118 bool "Integrator" 119 select ARM_AMBA 120 select ICST525 121 122config ARCH_IOP3XX 123 bool "IOP3xx-based" 124 select PCI 125 126config ARCH_IXP4XX 127 bool "IXP4xx-based" 128 select DMABOUNCE 129 select PCI 130 131config ARCH_IXP2000 132 bool "IXP2400/2800-based" 133 select PCI 134 135config ARCH_L7200 136 bool "LinkUp-L7200" 137 select FIQ 138 help 139 Say Y here if you intend to run this kernel on a LinkUp Systems 140 L7200 Software Development Board which uses an ARM720T processor. 141 Information on this board can be obtained at: 142 143 <http://www.linkupsys.com/> 144 145 If you have any questions or comments about the Linux kernel port 146 to this board, send e-mail to <sjhill@cotw.com>. 147 148config ARCH_PXA 149 bool "PXA2xx-based" 150 151config ARCH_RPC 152 bool "RiscPC" 153 select ARCH_ACORN 154 select FIQ 155 select TIMER_ACORN 156 select ARCH_MAY_HAVE_PC_FDC 157 help 158 On the Acorn Risc-PC, Linux can support the internal IDE disk and 159 CD-ROM interface, serial and parallel port, and the floppy drive. 160 161config ARCH_SA1100 162 bool "SA1100-based" 163 select ISA 164 select ARCH_DISCONTIGMEM_ENABLE 165 166config ARCH_S3C2410 167 bool "Samsung S3C2410" 168 help 169 Samsung S3C2410X CPU based systems, such as the Simtec Electronics 170 BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or 171 the Samsung SMDK2410 development board (and derviatives). 172 173config ARCH_SHARK 174 bool "Shark" 175 select ISA 176 select ISA_DMA 177 select PCI 178 179config ARCH_LH7A40X 180 bool "Sharp LH7A40X" 181 help 182 Say Y here for systems based on one of the Sharp LH7A40X 183 System on a Chip processors. These CPUs include an ARM922T 184 core with a wide array of integrated devices for 185 hand-held and low-power applications. 186 187config ARCH_OMAP 188 bool "TI OMAP" 189 190config ARCH_VERSATILE 191 bool "Versatile" 192 select ARM_AMBA 193 select ICST307 194 help 195 This enables support for ARM Ltd Versatile board. 196 197config ARCH_REALVIEW 198 bool "RealView" 199 select ARM_AMBA 200 select ICST307 201 help 202 This enables support for ARM Ltd RealView boards. 203 204config ARCH_IMX 205 bool "IMX" 206 207config ARCH_H720X 208 bool "Hynix-HMS720x-based" 209 help 210 This enables support for systems based on the Hynix HMS720x 211 212config ARCH_AAEC2000 213 bool "Agilent AAEC-2000 based" 214 select ARM_AMBA 215 help 216 This enables support for systems based on the Agilent AAEC-2000 217 218endchoice 219 220source "arch/arm/mach-clps711x/Kconfig" 221 222source "arch/arm/mach-epxa10db/Kconfig" 223 224source "arch/arm/mach-footbridge/Kconfig" 225 226source "arch/arm/mach-integrator/Kconfig" 227 228source "arch/arm/mach-iop3xx/Kconfig" 229 230source "arch/arm/mach-ixp4xx/Kconfig" 231 232source "arch/arm/mach-ixp2000/Kconfig" 233 234source "arch/arm/mach-pxa/Kconfig" 235 236source "arch/arm/mach-sa1100/Kconfig" 237 238source "arch/arm/plat-omap/Kconfig" 239 240source "arch/arm/mach-omap1/Kconfig" 241 242source "arch/arm/mach-omap2/Kconfig" 243 244source "arch/arm/mach-s3c2410/Kconfig" 245 246source "arch/arm/mach-lh7a40x/Kconfig" 247 248source "arch/arm/mach-imx/Kconfig" 249 250source "arch/arm/mach-h720x/Kconfig" 251 252source "arch/arm/mach-versatile/Kconfig" 253 254source "arch/arm/mach-aaec2000/Kconfig" 255 256source "arch/arm/mach-realview/Kconfig" 257 258# Definitions to make life easier 259config ARCH_ACORN 260 bool 261 262source arch/arm/mm/Kconfig 263 264# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER 265config XSCALE_PMU 266 bool 267 depends on CPU_XSCALE && !XSCALE_PMU_TIMER 268 default y 269 270endmenu 271 272source "arch/arm/common/Kconfig" 273 274config FORCE_MAX_ZONEORDER 275 int 276 depends on SA1111 277 default "9" 278 279menu "Bus support" 280 281config ARM_AMBA 282 bool 283 284config ISA 285 bool 286 help 287 Find out whether you have ISA slots on your motherboard. ISA is the 288 name of a bus system, i.e. the way the CPU talks to the other stuff 289 inside your box. Other bus systems are PCI, EISA, MicroChannel 290 (MCA) or VESA. ISA is an older system, now being displaced by PCI; 291 newer boards don't support it. If you have ISA, say Y, otherwise N. 292 293config ISA_DMA 294 bool 295 296config ISA_DMA_API 297 bool 298 default y 299 300config PCI 301 bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB 302 help 303 Find out whether you have a PCI motherboard. PCI is the name of a 304 bus system, i.e. the way the CPU talks to the other stuff inside 305 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or 306 VESA. If you have PCI, say Y, otherwise N. 307 308 The PCI-HOWTO, available from 309 <http://www.tldp.org/docs.html#howto>, contains valuable 310 information about which PCI hardware does work under Linux and which 311 doesn't. 312 313# Select the host bridge type 314config PCI_HOST_VIA82C505 315 bool 316 depends on PCI && ARCH_SHARK 317 default y 318 319source "drivers/pci/Kconfig" 320 321source "drivers/pcmcia/Kconfig" 322 323endmenu 324 325menu "Kernel Features" 326 327config SMP 328 bool "Symmetric Multi-Processing (EXPERIMENTAL)" 329 depends on EXPERIMENTAL && REALVIEW_MPCORE 330 help 331 This enables support for systems with more than one CPU. If you have 332 a system with only one CPU, like most personal computers, say N. If 333 you have a system with more than one CPU, say Y. 334 335 If you say N here, the kernel will run on single and multiprocessor 336 machines, but will use only one CPU of a multiprocessor machine. If 337 you say Y here, the kernel will run on many, but not all, single 338 processor machines. On a single processor machine, the kernel will 339 run faster if you say N here. 340 341 See also the <file:Documentation/smp.txt>, 342 <file:Documentation/i386/IO-APIC.txt>, 343 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at 344 <http://www.linuxdoc.org/docs.html#howto>. 345 346 If you don't know what to do here, say N. 347 348config NR_CPUS 349 int "Maximum number of CPUs (2-32)" 350 range 2 32 351 depends on SMP 352 default "4" 353 354config HOTPLUG_CPU 355 bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" 356 depends on SMP && HOTPLUG && EXPERIMENTAL 357 help 358 Say Y here to experiment with turning CPUs off and on. CPUs 359 can be controlled through /sys/devices/system/cpu. 360 361config LOCAL_TIMERS 362 bool "Use local timer interrupts" 363 depends on SMP && REALVIEW_MPCORE 364 default y 365 help 366 Enable support for local timers on SMP platforms, rather then the 367 legacy IPI broadcast method. Local timers allows the system 368 accounting to be spread across the timer interval, preventing a 369 "thundering herd" at every timer tick. 370 371config PREEMPT 372 bool "Preemptible Kernel (EXPERIMENTAL)" 373 depends on EXPERIMENTAL 374 help 375 This option reduces the latency of the kernel when reacting to 376 real-time or interactive events by allowing a low priority process to 377 be preempted even if it is in kernel mode executing a system call. 378 This allows applications to run more reliably even when the system is 379 under load. 380 381 Say Y here if you are building a kernel for a desktop, embedded 382 or real-time system. Say N if you are unsure. 383 384config NO_IDLE_HZ 385 bool "Dynamic tick timer" 386 help 387 Select this option if you want to disable continuous timer ticks 388 and have them programmed to occur as required. This option saves 389 power as the system can remain in idle state for longer. 390 391 By default dynamic tick is disabled during the boot, and can be 392 manually enabled with: 393 394 echo 1 > /sys/devices/system/timer/timer0/dyn_tick 395 396 Alternatively, if you want dynamic tick automatically enabled 397 during boot, pass "dyntick=enable" via the kernel command string. 398 399 Please note that dynamic tick may affect the accuracy of 400 timekeeping on some platforms depending on the implementation. 401 Currently at least OMAP, PXA2xx and SA11x0 platforms are known 402 to have accurate timekeeping with dynamic tick. 403 404config ARCH_DISCONTIGMEM_ENABLE 405 bool 406 default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) 407 help 408 Say Y to support efficient handling of discontiguous physical memory, 409 for architectures which are either NUMA (Non-Uniform Memory Access) 410 or have huge holes in the physical address space for other reasons. 411 See <file:Documentation/vm/numa> for more. 412 413source "mm/Kconfig" 414 415config LEDS 416 bool "Timer and CPU usage LEDs" 417 depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ 418 ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ 419 ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ 420 ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ 421 ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE 422 help 423 If you say Y here, the LEDs on your machine will be used 424 to provide useful information about your current system status. 425 426 If you are compiling a kernel for a NetWinder or EBSA-285, you will 427 be able to select which LEDs are active using the options below. If 428 you are compiling a kernel for the EBSA-110 or the LART however, the 429 red LED will simply flash regularly to indicate that the system is 430 still functional. It is safe to say Y here if you have a CATS 431 system, but the driver will do nothing. 432 433config LEDS_TIMER 434 bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ 435 MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 436 depends on LEDS 437 default y if ARCH_EBSA110 438 help 439 If you say Y here, one of the system LEDs (the green one on the 440 NetWinder, the amber one on the EBSA285, or the red one on the LART) 441 will flash regularly to indicate that the system is still 442 operational. This is mainly useful to kernel hackers who are 443 debugging unstable kernels. 444 445 The LART uses the same LED for both Timer LED and CPU usage LED 446 functions. You may choose to use both, but the Timer LED function 447 will overrule the CPU usage LED. 448 449config LEDS_CPU 450 bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ 451 !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 452 depends on LEDS 453 help 454 If you say Y here, the red LED will be used to give a good real 455 time indication of CPU usage, by lighting whenever the idle task 456 is not currently executing. 457 458 The LART uses the same LED for both Timer LED and CPU usage LED 459 functions. You may choose to use both, but the Timer LED function 460 will overrule the CPU usage LED. 461 462config ALIGNMENT_TRAP 463 bool 464 default y if !ARCH_EBSA110 465 help 466 ARM processors can not fetch/store information which is not 467 naturally aligned on the bus, i.e., a 4 byte fetch must start at an 468 address divisible by 4. On 32-bit ARM processors, these non-aligned 469 fetch/store instructions will be emulated in software if you say 470 here, which has a severe performance impact. This is necessary for 471 correct operation of some network protocols. With an IP-only 472 configuration it is safe to say N, otherwise say Y. 473 474endmenu 475 476menu "Boot options" 477 478# Compressed boot loader in ROM. Yes, we really want to ask about 479# TEXT and BSS so we preserve their values in the config files. 480config ZBOOT_ROM_TEXT 481 hex "Compressed ROM boot loader base address" 482 default "0" 483 help 484 The physical address at which the ROM-able zImage is to be 485 placed in the target. Platforms which normally make use of 486 ROM-able zImage formats normally set this to a suitable 487 value in their defconfig file. 488 489 If ZBOOT_ROM is not enabled, this has no effect. 490 491config ZBOOT_ROM_BSS 492 hex "Compressed ROM boot loader BSS address" 493 default "0" 494 help 495 The base address of 64KiB of read/write memory in the target 496 for the ROM-able zImage, which must be available while the 497 decompressor is running. Platforms which normally make use of 498 ROM-able zImage formats normally set this to a suitable 499 value in their defconfig file. 500 501 If ZBOOT_ROM is not enabled, this has no effect. 502 503config ZBOOT_ROM 504 bool "Compressed boot loader in ROM/flash" 505 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS 506 help 507 Say Y here if you intend to execute your compressed kernel image 508 (zImage) directly from ROM or flash. If unsure, say N. 509 510config CMDLINE 511 string "Default kernel command string" 512 default "" 513 help 514 On some architectures (EBSA110 and CATS), there is currently no way 515 for the boot loader to pass arguments to the kernel. For these 516 architectures, you should supply some command-line options at build 517 time by entering them here. As a minimum, you should specify the 518 memory size and the root device (e.g., mem=64M root=/dev/nfs). 519 520config XIP_KERNEL 521 bool "Kernel Execute-In-Place from ROM" 522 depends on !ZBOOT_ROM 523 help 524 Execute-In-Place allows the kernel to run from non-volatile storage 525 directly addressable by the CPU, such as NOR flash. This saves RAM 526 space since the text section of the kernel is not loaded from flash 527 to RAM. Read-write sections, such as the data section and stack, 528 are still copied to RAM. The XIP kernel is not compressed since 529 it has to run directly from flash, so it will take more space to 530 store it. The flash address used to link the kernel object files, 531 and for storing it, is configuration dependent. Therefore, if you 532 say Y here, you must know the proper physical address where to 533 store the kernel image depending on your own flash memory usage. 534 535 Also note that the make target becomes "make xipImage" rather than 536 "make zImage" or "make Image". The final kernel binary to put in 537 ROM memory will be arch/arm/boot/xipImage. 538 539 If unsure, say N. 540 541config XIP_PHYS_ADDR 542 hex "XIP Kernel Physical Location" 543 depends on XIP_KERNEL 544 default "0x00080000" 545 help 546 This is the physical address in your flash memory the kernel will 547 be linked for and stored to. This address is dependent on your 548 own flash usage. 549 550endmenu 551 552if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1) 553 554menu "CPU Frequency scaling" 555 556source "drivers/cpufreq/Kconfig" 557 558config CPU_FREQ_SA1100 559 bool 560 depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) 561 default y 562 563config CPU_FREQ_SA1110 564 bool 565 depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) 566 default y 567 568config CPU_FREQ_INTEGRATOR 569 tristate "CPUfreq driver for ARM Integrator CPUs" 570 depends on ARCH_INTEGRATOR && CPU_FREQ 571 default y 572 help 573 This enables the CPUfreq driver for ARM Integrator CPUs. 574 575 For details, take a look at <file:Documentation/cpu-freq>. 576 577 If in doubt, say Y. 578 579endmenu 580 581endif 582 583menu "Floating point emulation" 584 585comment "At least one emulation must be selected" 586 587config FPE_NWFPE 588 bool "NWFPE math emulation" 589 ---help--- 590 Say Y to include the NWFPE floating point emulator in the kernel. 591 This is necessary to run most binaries. Linux does not currently 592 support floating point hardware so you need to say Y here even if 593 your machine has an FPA or floating point co-processor podule. 594 595 You may say N here if you are going to load the Acorn FPEmulator 596 early in the bootup. 597 598config FPE_NWFPE_XP 599 bool "Support extended precision" 600 depends on FPE_NWFPE 601 help 602 Say Y to include 80-bit support in the kernel floating-point 603 emulator. Otherwise, only 32 and 64-bit support is compiled in. 604 Note that gcc does not generate 80-bit operations by default, 605 so in most cases this option only enlarges the size of the 606 floating point emulator without any good reason. 607 608 You almost surely want to say N here. 609 610config FPE_FASTFPE 611 bool "FastFPE math emulation (EXPERIMENTAL)" 612 depends on !CPU_32v3 && EXPERIMENTAL 613 ---help--- 614 Say Y here to include the FAST floating point emulator in the kernel. 615 This is an experimental much faster emulator which now also has full 616 precision for the mantissa. It does not support any exceptions. 617 It is very simple, and approximately 3-6 times faster than NWFPE. 618 619 It should be sufficient for most programs. It may be not suitable 620 for scientific calculations, but you have to check this for yourself. 621 If you do not feel you need a faster FP emulation you should better 622 choose NWFPE. 623 624config VFP 625 bool "VFP-format floating point maths" 626 depends on CPU_V6 || CPU_ARM926T 627 help 628 Say Y to include VFP support code in the kernel. This is needed 629 if your hardware includes a VFP unit. 630 631 Please see <file:Documentation/arm/VFP/release-notes.txt> for 632 release notes and additional status information. 633 634 Say N if your target does not have VFP hardware. 635 636endmenu 637 638menu "Userspace binary formats" 639 640source "fs/Kconfig.binfmt" 641 642config ARTHUR 643 tristate "RISC OS personality" 644 help 645 Say Y here to include the kernel code necessary if you want to run 646 Acorn RISC OS/Arthur binaries under Linux. This code is still very 647 experimental; if this sounds frightening, say N and sleep in peace. 648 You can also say M here to compile this support as a module (which 649 will be called arthur). 650 651endmenu 652 653menu "Power management options" 654 655source "kernel/power/Kconfig" 656 657config APM 658 tristate "Advanced Power Management Emulation" 659 depends on PM_LEGACY 660 ---help--- 661 APM is a BIOS specification for saving power using several different 662 techniques. This is mostly useful for battery powered laptops with 663 APM compliant BIOSes. If you say Y here, the system time will be 664 reset after a RESUME operation, the /proc/apm device will provide 665 battery status information, and user-space programs will receive 666 notification of APM "events" (e.g. battery status change). 667 668 In order to use APM, you will need supporting software. For location 669 and more information, read <file:Documentation/pm.txt> and the 670 Battery Powered Linux mini-HOWTO, available from 671 <http://www.tldp.org/docs.html#howto>. 672 673 This driver does not spin down disk drives (see the hdparm(8) 674 manpage ("man 8 hdparm") for that), and it doesn't turn off 675 VESA-compliant "green" monitors. 676 677 Generally, if you don't have a battery in your machine, there isn't 678 much point in using this driver and you should say N. If you get 679 random kernel OOPSes or reboots that don't seem to be related to 680 anything, try disabling/enabling this option (or disabling/enabling 681 APM in your BIOS). 682 683endmenu 684 685source "net/Kconfig" 686 687menu "Device Drivers" 688 689source "drivers/base/Kconfig" 690 691source "drivers/connector/Kconfig" 692 693if ALIGNMENT_TRAP 694source "drivers/mtd/Kconfig" 695endif 696 697source "drivers/parport/Kconfig" 698 699source "drivers/pnp/Kconfig" 700 701source "drivers/block/Kconfig" 702 703source "drivers/acorn/block/Kconfig" 704 705if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ 706 || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ 707 || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE 708source "drivers/ide/Kconfig" 709endif 710 711source "drivers/scsi/Kconfig" 712 713source "drivers/md/Kconfig" 714 715source "drivers/message/fusion/Kconfig" 716 717source "drivers/ieee1394/Kconfig" 718 719source "drivers/message/i2o/Kconfig" 720 721source "drivers/net/Kconfig" 722 723source "drivers/isdn/Kconfig" 724 725# input before char - char/joystick depends on it. As does USB. 726 727source "drivers/input/Kconfig" 728 729source "drivers/char/Kconfig" 730 731source "drivers/i2c/Kconfig" 732 733source "drivers/hwmon/Kconfig" 734 735#source "drivers/l3/Kconfig" 736 737source "drivers/misc/Kconfig" 738 739source "drivers/mfd/Kconfig" 740 741source "drivers/media/Kconfig" 742 743source "drivers/video/Kconfig" 744 745source "sound/Kconfig" 746 747source "drivers/usb/Kconfig" 748 749source "drivers/mmc/Kconfig" 750 751endmenu 752 753source "fs/Kconfig" 754 755source "arch/arm/oprofile/Kconfig" 756 757source "arch/arm/Kconfig.debug" 758 759source "security/Kconfig" 760 761source "crypto/Kconfig" 762 763source "lib/Kconfig" 764