xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml (revision 2e21dee6a46a66e4c2ced778485e1044101edee4) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. MDM9615 TLMM block
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11
12description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC.
13
14$ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
15
16properties:
17  compatible:
18    const: qcom,mdm9615-pinctrl
19
20  reg:
21    maxItems: 1
22
23  interrupts:
24    maxItems: 1
25
26patternProperties:
27  "-state$":
28    oneOf:
29      - $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
30      - patternProperties:
31          "-pins$":
32            $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
33        additionalProperties: false
34
35$defs:
36  qcom-mdm9615-pinctrl-state:
37    type: object
38    description:
39      Pinctrl node's client devices use subnodes for desired pin configuration.
40      Client device subnodes use below standard properties.
41    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
42    unevaluatedProperties: false
43
44    properties:
45      pins:
46        description:
47          List of gpio pins affected by the properties specified in this
48          subnode.
49        items:
50          pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$"
51        minItems: 1
52        maxItems: 16
53
54      function:
55        description:
56          Specify the alternative function to be configured for the specified
57          pins.
58
59        enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
60                sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
61
62    required:
63      - pins
64
65required:
66  - compatible
67  - reg
68
69unevaluatedProperties: false
70
71examples:
72  - |
73    #include <dt-bindings/interrupt-controller/arm-gic.h>
74    tlmm: pinctrl@1000000 {
75      compatible = "qcom,mdm9615-pinctrl";
76      reg = <0x01000000 0x300000>;
77      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
78      gpio-controller;
79      gpio-ranges = <&msmgpio 0 0 88>;
80      #gpio-cells = <2>;
81      interrupt-controller;
82      #interrupt-cells = <2>;
83
84      gsbi3-state {
85        pins = "gpio8", "gpio9", "gpio10", "gpio11";
86        function = "gsbi3";
87        drive-strength = <8>;
88        bias-disable;
89      };
90
91      gsbi5-i2c-state {
92        sda-pins {
93          pins = "gpio16";
94          function = "gsbi5_i2c";
95          drive-strength = <8>;
96          bias-disable;
97        };
98
99        scl-pins {
100          pins = "gpio17";
101          function = "gsbi5_i2c";
102          drive-strength = <2>;
103          bias-disable;
104        };
105      };
106    };
107