Copyright (c) 1985 Regents of the University of California. All rights reserved. The Berkeley software License Agreement specifies the terms and conditions for redistribution.
Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
rdist [-b] [-D] [-h] [-i] [-n] [-q] [-R] [-a] [-K] [-x] [-PN | -PO] [-k realm] [-v] [-w] [-y] [-d macro = value] [-f distfile] [-m host]...
rdist [-b] [-D] [-h] [-i] [-n] [-q] [-R] [-a] [-K] [-x] [-PN | -PO] [-k realm] [-v] [-w] [-y] -c pathname... [login @] hostname [: destpath]
There are two forms of the rdist command. In the first form shown in the SYNOPSIS section above, rdist reads the indicated distfile for instructions on updating files and/or directories. If distfile is `-', the standard input is used. If no -f option is present, rdist first looks in its working directory for distfile, and then for Distfile, for instructions.
The second form shown in SYNOPSIS uses the -c option and specifies paths as command line options.
The user can opt for a secure session of rdist which uses Kerberos V5 for authentication. Encryption of the data being transferred is also possible. The rdist session can be kerberized using any of the following Kerberos specific options : -a, -PN or -PO, -x, and -k realm. Some of these options (-a, -x, -PN or -PO, and -f or -F) can also be specified in the [appdefaults] section of krb5.conf(5). The usage of these options and the expected behavior is discussed in the OPTIONS section below. If Kerberos authentication is used, authorization to the account is controlled by rules in krb5_auth_rules(7). If this authorization fails, fallback to normal rdist using rhosts occurs only if the -PO option is used explicitly on the command line or is specified in krb5.conf(5). Also notice that the -PN or -PO, -x, and -k realm options are just supersets of the -a option. In order to use the non-secure version of rdist across machines, each host machine must have a /etc/host.equiv file, or the user must have an entry in the .rhosts file in the home directory. See hosts.equiv(5) for more information.
This option explicitly enables Kerberos authentication and trusts the .k5login file for access-control. If the authorization check by in.rshd(8) on the server-side succeeds and if the .k5login file permits access, the user is allowed to carry out the rdist transfer.
Binary comparison. Performs a binary comparison and updates files if they differ, rather than merely comparing dates and sizes.
Copies each pathname to the named host; if destpath is specified, it does not update any pathname on the named host. (Relative filenames are taken as relative to your home directory.) If the `login\|@' prefix is given, the update is performed with the user ID of login. If the `:destpath' is given, the remote file is installed as that pathname.
Defines macro to have value. This option is used to define or override macro definitions in the distfile. value can be the empty string, one name, or a list of names surrounded by parentheses and separated by white space.
Enables debugging.
Uses the description file distfile. A `-' as the distfile argument denotes the standard input.
Follows symbolic links. Copies the file that the link points to rather than the link itself.
Ignores unresolved links. rdist normally tries to maintain the link structure of files being transferred and warn the user if all the links cannot be found.
Causes rdist to obtain tickets for the remote host in realm instead of the remote host's realm as determined by krb5.conf(5).
This option explicitly disables Kerberos authentication. It can be used to override the autologin variable in krb5.conf(5).
Limits which machines are to be updated. Multiple -m arguments can be given to limit updates to a subset of the hosts listed in the distfile.
Prints the commands without executing them. This option is useful for debugging a distfile.
-PN
Explicitly requests new (-PN) or old (-PO) version of the Kerberos "rcmd" protocol. The new protocol avoids many security problems prevalent in the old one and is regarded much more secure, but is not interoperable with older (MIT/SEAM) servers. The new protocol is used by default, unless explicitly specified using these options or through krb5.conf(5). If Kerberos authorization fails when using the old "rcmd" protocol, there is fallback to regular, non-kerberized rdist. This is not the case when the new, more secure "rcmd" protocol is used.
Quiet mode. Does not display the files being updated on the standard output.
Removes extraneous files. If a directory is being updated, removes files on the remote host that do not correspond to those in the master (local) directory. This is useful for maintaining truly identical copies of directories.
Verifies that the files are up to date on all the hosts. Any files that are out of date are displayed, but no files are updated, nor is any mail sent.
Whole mode. The whole file name is appended to the destination directory name. Normally, only the last component of a name is used when renaming files. This preserves the directory structure of the files being copied, instead of flattening the directory structure. For instance, renaming a list of files such as dir1/dir2 to dir3 would create files dir3/dir1 and dir3/dir2 instead of dir3 and dir3. When the -w option is used with a filename that begins with ~, everything except the home directory is appended to the destination name.
Causes the information transferred between hosts to be encrypted. Notice that the command is sent unencrypted to the remote system. All subsequent transfers are encrypted.
Younger mode. Does not update remote copies that are younger than the master copy, but issues a warning message instead. Only modification times are checked. No comparison of size is made.
variable_name '=' name_list [ label: ] source_list '->' destination_list command_list [ label: ] source_list '::' time_stamp_file command_list
The first format is used for defining variables. The second format is used for distributing files to other hosts. The third format is used for making lists of files that have been changed since some given date. The source list specifies a list of files and/or directories on the local host that are to be used as the master copy for distribution. The destination list is the list of hosts to which these files are to be copied. Each file in the source list is added to a list of changes if the file is out of date on the host that is being updated (second format) or if the file is newer than the time stamp file (third format). Labels are optional. They are used to identify a command for partial updates. The colon (:) is used after an optional label, while the double colon (::) is used for making lists of files that have been changed since a certain date (specified by the date/time of the time_stamp file). Typically, only notify is used with the '::' format of the command line.
A macro definition is a line of the form:
macro = value
A macro reference is a string of the form:
${macro}
although (as with make(1S)) the braces can be omitted if the macro name consists of just one character.
The ~ character is also expanded in the same way as with csh; however, it is expanded separately on the local and destination hosts.
Copy out of date files and directories (recursively). If no newname operand is given, the name of the local file is given to the remote host's copy. If absent from the remote host, parent directories in a filename's path are created. To help prevent disasters, a non-empty directory on a target host is not replaced with a regular file or a symbolic link by rdist. However, when using the -R option, a non-empty directory is removed if the corresponding filename is completely absent on the master host. The options for install have the same semantics as their command line counterparts, but are limited in scope to a particular map. The login name used on the destination host is the same as on the local host unless the destination name is of the format login@host. In that case, the update is performed under the username login.
Send mail to the indicated email address of the form: user@host that lists the files updated and any errors that might have occurred. If an address does not contain a `@host\|' suffix, rdist uses the name of the destination host to complete the address.
Omit from updates the files named as arguments.
Omit from updates the filenames that match each regular-expression pattern (see ed(1) for more information on regular expressions). Note that `\e' and `$' characters must be escaped in the distfile. Shell variables can also be used within a pattern, however shell filename expansion is not supported.
Specify a Bourne shell, sh(1) command line to execute on the remote host after each named file is updated. If no filename argument is present, the command-line is performed for every updated file, with the shell variable FILE set to the file's name on the local host. The quotation marks allow command-line to span input lines in the distfile; multiple shell commands must be separated by semicolons (;). The default working directory for the shell executing each command-line is the user's home directory on the remote host.
The following sample distfile instructs rdist to maintain identical copies of a shared library, a shared-library initialized data file, several include files, and a directory, on hosts named hermes and magus. On magus, commands are executed as super-user. rdist notifies merlin@druid whenever it discovers that a local file has changed relative to a timestamp file. (Parentheses are used when the source or destination list contains zero or more names separated by white-space.)
HOSTS = ( hermes root@magus )
FILES = ( /usr/local/lib/libcant.so.1.1
/usrlocal/lib/libcant.sa.1.1 /usr/local/include/{*.h}
/usr/local/bin )
(${FILES}) -> (${HOSTS})
install -R ;
${FILES} :: /usr/local/lib/timestamp
notify merlin@druid ;
User's trusted hosts and users
System trusted hosts and users
Temporary file for update lists
File containing Kerberos principals that are allowed access
Kerberos configuration file
There is no easy way to have a special command executed only once after all files in a directory have been updated.
Variable expansion only works for name lists; there should be a general macro facility.
rdist aborts on files that have a negative modification time (before Jan 1, 1970).
There should be a "force" option to allow replacement of non-empty directories by regular files or symlinks. A means of updating file modes and owners of otherwise identical files is also needed.