1.\" Copyright (c) 1987, 1990, 1993 2.\" The Regents of the University of California. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. Neither the name of the University nor the names of its contributors 13.\" may be used to endorse or promote products derived from this software 14.\" without specific prior written permission. 15.\" 16.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 17.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 20.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26.\" SUCH DAMAGE. 27.\" 28.\" From: @(#)install.1 8.1 (Berkeley) 6/6/93 29.\" $FreeBSD$ 30.\" 31.Dd August 12, 2019 32.Dt INSTALL 1 33.Os 34.Sh NAME 35.Nm install 36.Nd install binaries 37.Sh SYNOPSIS 38.Nm 39.Op Fl bCcpSsUv 40.Op Fl B Ar suffix 41.Op Fl D Ar destdir 42.Op Fl f Ar flags 43.Op Fl g Ar group 44.Op Fl h Ar hash 45.Op Fl l Ar linkflags 46.Op Fl M Ar metalog 47.Op Fl m Ar mode 48.Op Fl N Ar dbdir 49.Op Fl o Ar owner 50.Op Fl T Ar tags 51.Ar file1 file2 52.Nm 53.Op Fl bCcpSsUv 54.Op Fl B Ar suffix 55.Op Fl D Ar destdir 56.Op Fl f Ar flags 57.Op Fl g Ar group 58.Op Fl h Ar hash 59.Op Fl l Ar linkflags 60.Op Fl M Ar metalog 61.Op Fl m Ar mode 62.Op Fl N Ar dbdir 63.Op Fl o Ar owner 64.Op Fl T Ar tags 65.Ar file1 ... fileN directory 66.Nm 67.Fl d 68.Op Fl Uv 69.Op Fl D Ar destdir 70.Op Fl g Ar group 71.Op Fl h Ar hash 72.Op Fl M Ar metalog 73.Op Fl m Ar mode 74.Op Fl N Ar dbdir 75.Op Fl o Ar owner 76.Op Fl T Ar tags 77.Ar directory ... 78.Sh DESCRIPTION 79The file(s) are copied 80(or linked if the 81.Fl l 82option is specified) to the target file or directory. 83If the destination is a directory, then the 84.Ar file 85is copied into 86.Ar directory 87with its original filename. 88If the target file already exists, it is 89either renamed to 90.Ar file Ns Pa .old 91if the 92.Fl b 93option is given 94or overwritten 95if permissions allow. 96An alternate backup suffix may be specified via the 97.Fl B 98option's argument. 99.Pp 100The options are as follows: 101.Bl -tag -width indent 102.It Fl b 103Back up any existing files before overwriting them by renaming 104them to 105.Ar file Ns Pa .old . 106See 107.Fl B 108for specifying a different backup suffix. 109.It Fl B Ar suffix 110Use 111.Ar suffix 112as the backup suffix if 113.Fl b 114is given. 115.It Fl C 116Copy the file. 117If the target file already exists and the files are the same, 118then do not change the modification time of the target. 119If the target's file flags and mode need not to be changed, 120the target's inode change time is also unchanged. 121.It Fl c 122Copy the file. 123This is actually the default. 124The 125.Fl c 126option is only included for backwards compatibility. 127.It Fl D Ar destdir 128Specify the 129.Ev DESTDIR 130(top of the file hierarchy) that the items are installed in to. 131If 132.Fl M Ar metalog 133is in use, a leading string of 134.Dq Ar destdir 135will be removed from the file names logged to the 136.Ar metalog . 137This option does not affect where the actual files are installed. 138.It Fl d 139Create directories. 140Missing parent directories are created as required. 141.It Fl f Ar flags 142Specify the target's file flags; see 143.Xr chflags 1 144for a list of possible flags and their meanings. 145.It Fl g Ar group 146Specify a group. 147A numeric GID is allowed. 148.It Fl h Ar hash 149When copying, calculate the digest of the files with 150.Ar hash 151to store in the 152.Fl M Ar metalog . 153When 154.Fl d 155is given no hash is emitted. 156Supported digests: 157.Bl -tag -width rmd160 -offset indent 158.It Sy none 159No hash. 160This is the default. 161.It Sy md5 162The MD5 cryptographic message digest. 163.It Sy rmd160 164The RMD-160 cryptographic message digest. 165.It Sy sha1 166The SHA-1 cryptographic message digest. 167.It Sy sha256 168The 256-bits SHA-2 cryptographic message digest of the file. 169.It Sy sha512 170The 512-bits SHA-2 cryptographic message digest of the file. 171.El 172.It Fl l Ar linkflags 173Instead of copying the file make a link to the source. 174The type of the link is determined by the 175.Ar linkflags 176argument. 177Valid 178.Ar linkflags 179are: 180.Ar a 181(absolute), 182.Ar r 183(relative), 184.Ar h 185(hard), 186.Ar s 187(symbolic), 188.Ar m 189(mixed). 190Absolute and relative have effect only for symbolic links. 191Mixed links 192are hard links for files on the same filesystem, symbolic otherwise. 193.It Fl M Ar metalog 194Write the metadata associated with each item installed to 195.Ar metalog 196in an 197.Xr mtree 8 198.Dq full path 199specification line. 200The metadata includes: the file name and file type, and depending upon 201other options, the owner, group, file flags, modification time, and tags. 202.It Fl m Ar mode 203Specify an alternate mode. 204The default mode is set to rwxr-xr-x (0755). 205The specified mode may be either an octal or symbolic value; see 206.Xr chmod 1 207for a description of possible mode values. 208.It Fl N Ar dbdir 209Use the user database text file 210.Pa master.passwd 211and group database text file 212.Pa group 213from 214.Ar dbdir , 215rather than using the results from the system's 216.Xr getpwnam 3 217and 218.Xr getgrnam 3 219(and related) library calls. 220.It Fl o Ar owner 221Specify an owner. 222A numeric UID is allowed. 223.It Fl p 224Preserve the access and modification times. 225Copy the file, as if the 226.Fl C 227(compare and copy) option is specified, 228except if the target file does not already exist or is different, 229then preserve the access and modification times of the source file. 230.It Fl S 231Safe copy. 232Normally, 233.Nm 234unlinks an existing target before installing the new file. 235With the 236.Fl S 237flag a temporary file is used and then renamed to be 238the target. 239The reason this is safer is that if the copy or 240rename fails, the existing target is left untouched. 241.It Fl s 242.Nm 243exec's the command 244.Xr strip 1 245to strip binaries so that 246.Nm 247can be portable over a large 248number of systems and binary types. 249See below for how 250.Nm 251can be instructed to use another program to strip binaries. 252.It Fl T Ar tags 253Specify the 254.Xr mtree 8 255tags to write out for the file when using 256.Fl M Ar metalog . 257.It Fl U 258Indicate that install is running unprivileged, and that it should not 259try to change the owner, the group, or the file flags of the destination. 260The information that would have been updated can be stored in a log 261file with 262.Fl M Ar metalog . 263.It Fl v 264Cause 265.Nm 266to be verbose, 267showing files as they are installed or backed up. 268.El 269.Pp 270By default, 271.Nm 272preserves all file flags, with the exception of the 273.Dq nodump 274flag. 275.Pp 276The 277.Nm 278utility attempts to prevent moving a file onto itself. 279.Pp 280Installing 281.Pa /dev/null 282creates an empty file. 283.Sh ENVIRONMENT 284The 285.Nm 286utility checks for the presence of the 287.Ev STRIPBIN 288environment variable and if present, 289uses the assigned value as the program to run if and when the 290.Fl s 291option has been specified. 292.Pp 293If the 294.Ev DONTSTRIP 295environment variable is present, 296.Nm 297will ignore any specification of the 298.Fl s 299option. 300This is mainly for use in debugging the 301.Fx 302Ports Collection. 303.Sh FILES 304.Bl -tag -width "INS@XXXX" -compact 305.It Pa INS@XXXX 306If either 307.Fl S 308option is specified, or the 309.Fl C 310or 311.Fl p 312option is used in conjunction with the 313.Fl s 314option, temporary files named 315.Pa INS@XXXX , 316where 317.Pa XXXX 318is decided by 319.Xr mkstemp 3 , 320are created in the target directory. 321.El 322.Sh EXIT STATUS 323.Ex -std 324.Sh COMPATIBILITY 325Historically 326.Nm 327moved files by default. 328The default was changed to copy in 329.Fx 4.4 . 330.Sh SEE ALSO 331.Xr chflags 1 , 332.Xr chgrp 1 , 333.Xr chmod 1 , 334.Xr cp 1 , 335.Xr mv 1 , 336.Xr strip 1 , 337.Xr mmap 2 , 338.Xr getgrnam 3 , 339.Xr getpwnam 3 , 340.Xr chown 8 341.Sh HISTORY 342The 343.Nm 344utility appeared in 345.Bx 4.2 . 346.Sh BUGS 347The meaning of the 348.Fl M 349option has changed as of 350.Fx 9.2 351and it now takes an argument. 352Command lines that used the old 353.Fl M 354will get an error or in rare cases will append logs to the first of 355multiple source files rather than installing it. 356.Pp 357Temporary files may be left in the target directory if 358.Nm 359exits abnormally. 360.Pp 361File flags cannot be set by 362.Xr fchflags 2 363over a NFS file system. 364Other file systems do not have a concept of flags. 365The 366.Nm 367utility will only warn when flags could not be set on a file system 368that does not support them. 369.Pp 370The 371.Nm 372utility with 373.Fl v 374falsely says a file is copied when 375.Fl C 376snaps hard links. 377