1 /* 2 * soundcard.h 3 */ 4 5 /*- 6 * SPDX-License-Identifier: BSD-2-Clause 7 * 8 * Copyright by Hannu Savolainen 1993 / 4Front Technologies 1993-2006 9 * Modified for the new FreeBSD sound driver by Luigi Rizzo, 1997 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above 17 * copyright notice, this list of conditions and the following 18 * disclaimer in the documentation and/or other materials provided 19 * with the distribution. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 24 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR 25 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 31 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 32 * POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD$ 35 */ 36 37 /* 38 * Unless coordinating changes with 4Front Technologies, do NOT make any 39 * modifications to ioctl commands, types, etc. that would break 40 * compatibility with the OSS API. 41 */ 42 43 #ifndef _SYS_SOUNDCARD_H_ 44 #define _SYS_SOUNDCARD_H_ 45 /* 46 * If you make modifications to this file, please contact me before 47 * distributing the modified version. There is already enough 48 * diversity in the world. 49 * 50 * Regards, 51 * Hannu Savolainen 52 * hannu@voxware.pp.fi 53 * 54 ********************************************************************** 55 * PS. The Hacker's Guide to VoxWare available from 56 * nic.funet.fi:pub/Linux/ALPHA/sound. The file is 57 * snd-sdk-doc-0.1.ps.gz (gzipped postscript). It contains 58 * some useful information about programming with VoxWare. 59 * (NOTE! The pub/Linux/ALPHA/ directories are hidden. You have 60 * to cd inside them before the files are accessible.) 61 ********************************************************************** 62 */ 63 64 /* 65 * SOUND_VERSION is only used by the voxware driver. Hopefully apps 66 * should not depend on it, but rather look at the capabilities 67 * of the driver in the kernel! 68 */ 69 #define SOUND_VERSION 301 70 #define VOXWARE /* does this have any use ? */ 71 72 /* 73 * Supported card ID numbers (Should be somewhere else? We keep 74 * them here just for compativility with the old driver, but these 75 * constants are of little or no use). 76 */ 77 78 #define SNDCARD_ADLIB 1 79 #define SNDCARD_SB 2 80 #define SNDCARD_PAS 3 81 #define SNDCARD_GUS 4 82 #define SNDCARD_MPU401 5 83 #define SNDCARD_SB16 6 84 #define SNDCARD_SB16MIDI 7 85 #define SNDCARD_UART6850 8 86 #define SNDCARD_GUS16 9 87 #define SNDCARD_MSS 10 88 #define SNDCARD_PSS 11 89 #define SNDCARD_SSCAPE 12 90 #define SNDCARD_PSS_MPU 13 91 #define SNDCARD_PSS_MSS 14 92 #define SNDCARD_SSCAPE_MSS 15 93 #define SNDCARD_TRXPRO 16 94 #define SNDCARD_TRXPRO_SB 17 95 #define SNDCARD_TRXPRO_MPU 18 96 #define SNDCARD_MAD16 19 97 #define SNDCARD_MAD16_MPU 20 98 #define SNDCARD_CS4232 21 99 #define SNDCARD_CS4232_MPU 22 100 #define SNDCARD_MAUI 23 101 #define SNDCARD_PSEUDO_MSS 24 102 #define SNDCARD_AWE32 25 103 #define SNDCARD_NSS 26 104 #define SNDCARD_UART16550 27 105 #define SNDCARD_OPL 28 106 107 #include <sys/types.h> 108 #include <machine/endian.h> 109 #ifndef _IOWR 110 #include <sys/ioccom.h> 111 #endif /* !_IOWR */ 112 113 /* 114 * The first part of this file contains the new FreeBSD sound ioctl 115 * interface. Tries to minimize the number of different ioctls, and 116 * to be reasonably general. 117 * 118 * 970821: some of the new calls have not been implemented yet. 119 */ 120 121 /* 122 * the following three calls extend the generic file descriptor 123 * interface. AIONWRITE is the dual of FIONREAD, i.e. returns the max 124 * number of bytes for a write operation to be non-blocking. 125 * 126 * AIOGSIZE/AIOSSIZE are used to change the behaviour of the device, 127 * from a character device (default) to a block device. In block mode, 128 * (not to be confused with blocking mode) the main difference for the 129 * application is that select() will return only when a complete 130 * block can be read/written to the device, whereas in character mode 131 * select will return true when one byte can be exchanged. For audio 132 * devices, character mode makes select almost useless since one byte 133 * will always be ready by the next sample time (which is often only a 134 * handful of microseconds away). 135 * Use a size of 0 or 1 to return to character mode. 136 */ 137 #define AIONWRITE _IOR('A', 10, int) /* get # bytes to write */ 138 struct snd_size { 139 int play_size; 140 int rec_size; 141 }; 142 #define AIOGSIZE _IOR('A', 11, struct snd_size)/* read current blocksize */ 143 #define AIOSSIZE _IOWR('A', 11, struct snd_size) /* sets blocksize */ 144 145 /* 146 * The following constants define supported audio formats. The 147 * encoding follows voxware conventions, i.e. 1 bit for each supported 148 * format. We extend it by using bit 31 (RO) to indicate full-duplex 149 * capability, and bit 29 (RO) to indicate that the card supports/ 150 * needs different formats on capture & playback channels. 151 * Bit 29 (RW) is used to indicate/ask stereo. 152 * 153 * The number of bits required to store the sample is: 154 * o 4 bits for the IDA ADPCM format, 155 * o 8 bits for 8-bit formats, mu-law and A-law, 156 * o 16 bits for the 16-bit formats, and 157 * o 32 bits for the 24/32-bit formats. 158 * o undefined for the MPEG audio format. 159 */ 160 161 #define AFMT_QUERY 0x00000000 /* Return current format */ 162 #define AFMT_MU_LAW 0x00000001 /* Logarithmic mu-law */ 163 #define AFMT_A_LAW 0x00000002 /* Logarithmic A-law */ 164 #define AFMT_IMA_ADPCM 0x00000004 /* A 4:1 compressed format where 16-bit 165 * squence represented using the 166 * the average 4 bits per sample */ 167 #define AFMT_U8 0x00000008 /* Unsigned 8-bit */ 168 #define AFMT_S16_LE 0x00000010 /* Little endian signed 16-bit */ 169 #define AFMT_S16_BE 0x00000020 /* Big endian signed 16-bit */ 170 #define AFMT_S8 0x00000040 /* Signed 8-bit */ 171 #define AFMT_U16_LE 0x00000080 /* Little endian unsigned 16-bit */ 172 #define AFMT_U16_BE 0x00000100 /* Big endian unsigned 16-bit */ 173 #define AFMT_MPEG 0x00000200 /* MPEG MP2/MP3 audio */ 174 #define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */ 175 176 /* 177 * 32-bit formats below used for 24-bit audio data where the data is stored 178 * in the 24 most significant bits and the least significant bits are not used 179 * (should be set to 0). 180 */ 181 #define AFMT_S32_LE 0x00001000 /* Little endian signed 32-bit */ 182 #define AFMT_S32_BE 0x00002000 /* Big endian signed 32-bit */ 183 #define AFMT_U32_LE 0x00004000 /* Little endian unsigned 32-bit */ 184 #define AFMT_U32_BE 0x00008000 /* Big endian unsigned 32-bit */ 185 #define AFMT_S24_LE 0x00010000 /* Little endian signed 24-bit */ 186 #define AFMT_S24_BE 0x00020000 /* Big endian signed 24-bit */ 187 #define AFMT_U24_LE 0x00040000 /* Little endian unsigned 24-bit */ 188 #define AFMT_U24_BE 0x00080000 /* Big endian unsigned 24-bit */ 189 190 /* Machine dependent AFMT_* definitions. */ 191 #if BYTE_ORDER == LITTLE_ENDIAN 192 #define AFMT_S16_NE AFMT_S16_LE 193 #define AFMT_S24_NE AFMT_S24_LE 194 #define AFMT_S32_NE AFMT_S32_LE 195 #define AFMT_U16_NE AFMT_U16_LE 196 #define AFMT_U24_NE AFMT_U24_LE 197 #define AFMT_U32_NE AFMT_U32_LE 198 #define AFMT_S16_OE AFMT_S16_BE 199 #define AFMT_S24_OE AFMT_S24_BE 200 #define AFMT_S32_OE AFMT_S32_BE 201 #define AFMT_U16_OE AFMT_U16_BE 202 #define AFMT_U24_OE AFMT_U24_BE 203 #define AFMT_U32_OE AFMT_U32_BE 204 #else 205 #define AFMT_S16_OE AFMT_S16_LE 206 #define AFMT_S24_OE AFMT_S24_LE 207 #define AFMT_S32_OE AFMT_S32_LE 208 #define AFMT_U16_OE AFMT_U16_LE 209 #define AFMT_U24_OE AFMT_U24_LE 210 #define AFMT_U32_OE AFMT_U32_LE 211 #define AFMT_S16_NE AFMT_S16_BE 212 #define AFMT_S24_NE AFMT_S24_BE 213 #define AFMT_S32_NE AFMT_S32_BE 214 #define AFMT_U16_NE AFMT_U16_BE 215 #define AFMT_U24_NE AFMT_U24_BE 216 #define AFMT_U32_NE AFMT_U32_BE 217 #endif 218 219 #define AFMT_STEREO 0x10000000 /* can do/want stereo */ 220 221 /* 222 * the following are really capabilities 223 */ 224 #define AFMT_WEIRD 0x20000000 /* weird hardware... */ 225 /* 226 * AFMT_WEIRD reports that the hardware might need to operate 227 * with different formats in the playback and capture 228 * channels when operating in full duplex. 229 * As an example, SoundBlaster16 cards only support U8 in one 230 * direction and S16 in the other one, and applications should 231 * be aware of this limitation. 232 */ 233 #define AFMT_FULLDUPLEX 0x80000000 /* can do full duplex */ 234 235 /* 236 * The following structure is used to get/set format and sampling rate. 237 * While it would be better to have things such as stereo, bits per 238 * sample, endiannes, etc split in different variables, it turns out 239 * that formats are not that many, and not all combinations are possible. 240 * So we followed the Voxware approach of associating one bit to each 241 * format. 242 */ 243 244 typedef struct _snd_chan_param { 245 u_long play_rate; /* sampling rate */ 246 u_long rec_rate; /* sampling rate */ 247 u_long play_format; /* everything describing the format */ 248 u_long rec_format; /* everything describing the format */ 249 } snd_chan_param; 250 #define AIOGFMT _IOR('f', 12, snd_chan_param) /* get format */ 251 #define AIOSFMT _IOWR('f', 12, snd_chan_param) /* sets format */ 252 253 /* 254 * The following structure is used to get/set the mixer setting. 255 * Up to 32 mixers are supported, each one with up to 32 channels. 256 */ 257 typedef struct _snd_mix_param { 258 u_char subdev; /* which output */ 259 u_char line; /* which input */ 260 u_char left,right; /* volumes, 0..255, 0 = mute */ 261 } snd_mix_param ; 262 263 /* XXX AIOGMIX, AIOSMIX not implemented yet */ 264 #define AIOGMIX _IOWR('A', 13, snd_mix_param) /* return mixer status */ 265 #define AIOSMIX _IOWR('A', 14, snd_mix_param) /* sets mixer status */ 266 267 /* 268 * channel specifiers used in AIOSTOP and AIOSYNC 269 */ 270 #define AIOSYNC_PLAY 0x1 /* play chan */ 271 #define AIOSYNC_CAPTURE 0x2 /* capture chan */ 272 /* AIOSTOP stop & flush a channel, returns the residual count */ 273 #define AIOSTOP _IOWR ('A', 15, int) 274 275 /* alternate method used to notify the sync condition */ 276 #define AIOSYNC_SIGNAL 0x100 277 #define AIOSYNC_SELECT 0x200 278 279 /* what the 'pos' field refers to */ 280 #define AIOSYNC_READY 0x400 281 #define AIOSYNC_FREE 0x800 282 283 typedef struct _snd_sync_parm { 284 long chan ; /* play or capture channel, plus modifier */ 285 long pos; 286 } snd_sync_parm; 287 #define AIOSYNC _IOWR ('A', 15, snd_sync_parm) /* misc. synchronization */ 288 289 /* 290 * The following is used to return device capabilities. If the structure 291 * passed to the ioctl is zeroed, default values are returned for rate 292 * and formats, a bitmap of available mixers is returned, and values 293 * (inputs, different levels) for the first one are returned. 294 * 295 * If formats, mixers, inputs are instantiated, then detailed info 296 * are returned depending on the call. 297 */ 298 typedef struct _snd_capabilities { 299 u_long rate_min, rate_max; /* min-max sampling rate */ 300 u_long formats; 301 u_long bufsize; /* DMA buffer size */ 302 u_long mixers; /* bitmap of available mixers */ 303 u_long inputs; /* bitmap of available inputs (per mixer) */ 304 u_short left, right; /* how many levels are supported */ 305 } snd_capabilities; 306 #define AIOGCAP _IOWR('A', 15, snd_capabilities) /* get capabilities */ 307 308 /* 309 * here is the old (Voxware) ioctl interface 310 */ 311 312 /* 313 * IOCTL Commands for /dev/sequencer 314 */ 315 316 #define SNDCTL_SEQ_RESET _IO ('Q', 0) 317 #define SNDCTL_SEQ_SYNC _IO ('Q', 1) 318 #define SNDCTL_SYNTH_INFO _IOWR('Q', 2, struct synth_info) 319 #define SNDCTL_SEQ_CTRLRATE _IOWR('Q', 3, int) /* Set/get timer res.(hz) */ 320 #define SNDCTL_SEQ_GETOUTCOUNT _IOR ('Q', 4, int) 321 #define SNDCTL_SEQ_GETINCOUNT _IOR ('Q', 5, int) 322 #define SNDCTL_SEQ_PERCMODE _IOW ('Q', 6, int) 323 #define SNDCTL_FM_LOAD_INSTR _IOW ('Q', 7, struct sbi_instrument) /* Valid for FM only */ 324 #define SNDCTL_SEQ_TESTMIDI _IOW ('Q', 8, int) 325 #define SNDCTL_SEQ_RESETSAMPLES _IOW ('Q', 9, int) 326 #define SNDCTL_SEQ_NRSYNTHS _IOR ('Q',10, int) 327 #define SNDCTL_SEQ_NRMIDIS _IOR ('Q',11, int) 328 #define SNDCTL_MIDI_INFO _IOWR('Q',12, struct midi_info) 329 #define SNDCTL_SEQ_THRESHOLD _IOW ('Q',13, int) 330 #define SNDCTL_SEQ_TRESHOLD SNDCTL_SEQ_THRESHOLD /* there was once a typo */ 331 #define SNDCTL_SYNTH_MEMAVL _IOWR('Q',14, int) /* in=dev#, out=memsize */ 332 #define SNDCTL_FM_4OP_ENABLE _IOW ('Q',15, int) /* in=dev# */ 333 #define SNDCTL_PMGR_ACCESS _IOWR('Q',16, struct patmgr_info) 334 #define SNDCTL_SEQ_PANIC _IO ('Q',17) 335 #define SNDCTL_SEQ_OUTOFBAND _IOW ('Q',18, struct seq_event_rec) 336 #define SNDCTL_SEQ_GETTIME _IOR ('Q',19, int) 337 338 struct seq_event_rec { 339 u_char arr[8]; 340 }; 341 342 #define SNDCTL_TMR_TIMEBASE _IOWR('T', 1, int) 343 #define SNDCTL_TMR_START _IO ('T', 2) 344 #define SNDCTL_TMR_STOP _IO ('T', 3) 345 #define SNDCTL_TMR_CONTINUE _IO ('T', 4) 346 #define SNDCTL_TMR_TEMPO _IOWR('T', 5, int) 347 #define SNDCTL_TMR_SOURCE _IOWR('T', 6, int) 348 # define TMR_INTERNAL 0x00000001 349 # define TMR_EXTERNAL 0x00000002 350 # define TMR_MODE_MIDI 0x00000010 351 # define TMR_MODE_FSK 0x00000020 352 # define TMR_MODE_CLS 0x00000040 353 # define TMR_MODE_SMPTE 0x00000080 354 #define SNDCTL_TMR_METRONOME _IOW ('T', 7, int) 355 #define SNDCTL_TMR_SELECT _IOW ('T', 8, int) 356 357 /* 358 * Endian aware patch key generation algorithm. 359 */ 360 361 #if defined(_AIX) || defined(AIX) 362 # define _PATCHKEY(id) (0xfd00|id) 363 #else 364 # define _PATCHKEY(id) ((id<<8)|0xfd) 365 #endif 366 367 /* 368 * Sample loading mechanism for internal synthesizers (/dev/sequencer) 369 * The following patch_info structure has been designed to support 370 * Gravis UltraSound. It tries to be universal format for uploading 371 * sample based patches but is probably too limited. 372 */ 373 374 struct patch_info { 375 /* u_short key; Use GUS_PATCH here */ 376 short key; /* Use GUS_PATCH here */ 377 #define GUS_PATCH _PATCHKEY(0x04) 378 #define OBSOLETE_GUS_PATCH _PATCHKEY(0x02) 379 380 short device_no; /* Synthesizer number */ 381 short instr_no; /* Midi pgm# */ 382 383 u_long mode; 384 /* 385 * The least significant byte has the same format than the GUS .PAT 386 * files 387 */ 388 #define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */ 389 #define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */ 390 #define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */ 391 #define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */ 392 #define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */ 393 #define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/ 394 #define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */ 395 /* (use the env_rate/env_offs fields). */ 396 /* Linux specific bits */ 397 #define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */ 398 #define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */ 399 #define WAVE_SCALE 0x00040000 /* The scaling info is valid */ 400 /* Other bits must be zeroed */ 401 402 long len; /* Size of the wave data in bytes */ 403 long loop_start, loop_end; /* Byte offsets from the beginning */ 404 405 /* 406 * The base_freq and base_note fields are used when computing the 407 * playback speed for a note. The base_note defines the tone frequency 408 * which is heard if the sample is played using the base_freq as the 409 * playback speed. 410 * 411 * The low_note and high_note fields define the minimum and maximum note 412 * frequencies for which this sample is valid. It is possible to define 413 * more than one samples for an instrument number at the same time. The 414 * low_note and high_note fields are used to select the most suitable one. 415 * 416 * The fields base_note, high_note and low_note should contain 417 * the note frequency multiplied by 1000. For example value for the 418 * middle A is 440*1000. 419 */ 420 421 u_int base_freq; 422 u_long base_note; 423 u_long high_note; 424 u_long low_note; 425 int panning; /* -128=left, 127=right */ 426 int detuning; 427 428 /* New fields introduced in version 1.99.5 */ 429 430 /* Envelope. Enabled by mode bit WAVE_ENVELOPES */ 431 u_char env_rate[ 6 ]; /* GUS HW ramping rate */ 432 u_char env_offset[ 6 ]; /* 255 == 100% */ 433 434 /* 435 * The tremolo, vibrato and scale info are not supported yet. 436 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or 437 * WAVE_SCALE 438 */ 439 440 u_char tremolo_sweep; 441 u_char tremolo_rate; 442 u_char tremolo_depth; 443 444 u_char vibrato_sweep; 445 u_char vibrato_rate; 446 u_char vibrato_depth; 447 448 int scale_frequency; 449 u_int scale_factor; /* from 0 to 2048 or 0 to 2 */ 450 451 int volume; 452 int spare[4]; 453 char data[1]; /* The waveform data starts here */ 454 }; 455 456 struct sysex_info { 457 short key; /* Use GUS_PATCH here */ 458 #define SYSEX_PATCH _PATCHKEY(0x05) 459 #define MAUI_PATCH _PATCHKEY(0x06) 460 short device_no; /* Synthesizer number */ 461 long len; /* Size of the sysex data in bytes */ 462 u_char data[1]; /* Sysex data starts here */ 463 }; 464 465 /* 466 * Patch management interface (/dev/sequencer, /dev/patmgr#) 467 * Don't use these calls if you want to maintain compatibility with 468 * the future versions of the driver. 469 */ 470 471 #define PS_NO_PATCHES 0 /* No patch support on device */ 472 #define PS_MGR_NOT_OK 1 /* Plain patch support (no mgr) */ 473 #define PS_MGR_OK 2 /* Patch manager supported */ 474 #define PS_MANAGED 3 /* Patch manager running */ 475 476 #define SNDCTL_PMGR_IFACE _IOWR('P', 1, struct patmgr_info) 477 478 /* 479 * The patmgr_info is a fixed size structure which is used for two 480 * different purposes. The intended use is for communication between 481 * the application using /dev/sequencer and the patch manager daemon 482 * associated with a synthesizer device (ioctl(SNDCTL_PMGR_ACCESS)). 483 * 484 * This structure is also used with ioctl(SNDCTL_PGMR_IFACE) which allows 485 * a patch manager daemon to read and write device parameters. This 486 * ioctl available through /dev/sequencer also. Avoid using it since it's 487 * extremely hardware dependent. In addition access trough /dev/sequencer 488 * may confuse the patch manager daemon. 489 */ 490 491 struct patmgr_info { /* Note! size must be < 4k since kmalloc() is used */ 492 u_long key; /* Don't worry. Reserved for communication 493 between the patch manager and the driver. */ 494 #define PM_K_EVENT 1 /* Event from the /dev/sequencer driver */ 495 #define PM_K_COMMAND 2 /* Request from an application */ 496 #define PM_K_RESPONSE 3 /* From patmgr to application */ 497 #define PM_ERROR 4 /* Error returned by the patmgr */ 498 int device; 499 int command; 500 501 /* 502 * Commands 0x000 to 0xfff reserved for patch manager programs 503 */ 504 #define PM_GET_DEVTYPE 1 /* Returns type of the patch mgr interface of dev */ 505 #define PMTYPE_FM2 1 /* 2 OP fm */ 506 #define PMTYPE_FM4 2 /* Mixed 4 or 2 op FM (OPL-3) */ 507 #define PMTYPE_WAVE 3 /* Wave table synthesizer (GUS) */ 508 #define PM_GET_NRPGM 2 /* Returns max # of midi programs in parm1 */ 509 #define PM_GET_PGMMAP 3 /* Returns map of loaded midi programs in data8 */ 510 #define PM_GET_PGM_PATCHES 4 /* Return list of patches of a program (parm1) */ 511 #define PM_GET_PATCH 5 /* Return patch header of patch parm1 */ 512 #define PM_SET_PATCH 6 /* Set patch header of patch parm1 */ 513 #define PM_READ_PATCH 7 /* Read patch (wave) data */ 514 #define PM_WRITE_PATCH 8 /* Write patch (wave) data */ 515 516 /* 517 * Commands 0x1000 to 0xffff are for communication between the patch manager 518 * and the client 519 */ 520 #define _PM_LOAD_PATCH 0x100 521 522 /* 523 * Commands above 0xffff reserved for device specific use 524 */ 525 526 long parm1; 527 long parm2; 528 long parm3; 529 530 union { 531 u_char data8[4000]; 532 u_short data16[2000]; 533 u_long data32[1000]; 534 struct patch_info patch; 535 } data; 536 }; 537 538 /* 539 * When a patch manager daemon is present, it will be informed by the 540 * driver when something important happens. For example when the 541 * /dev/sequencer is opened or closed. A record with key == PM_K_EVENT is 542 * returned. The command field contains the event type: 543 */ 544 #define PM_E_OPENED 1 /* /dev/sequencer opened */ 545 #define PM_E_CLOSED 2 /* /dev/sequencer closed */ 546 #define PM_E_PATCH_RESET 3 /* SNDCTL_RESETSAMPLES called */ 547 #define PM_E_PATCH_LOADED 4 /* A patch has been loaded by appl */ 548 549 /* 550 * /dev/sequencer input events. 551 * 552 * The data written to the /dev/sequencer is a stream of events. Events 553 * are records of 4 or 8 bytes. The first byte defines the size. 554 * Any number of events can be written with a write call. There 555 * is a set of macros for sending these events. Use these macros if you 556 * want to maximize portability of your program. 557 * 558 * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events. 559 * (All input events are currently 4 bytes long. Be prepared to support 560 * 8 byte events also. If you receive any event having first byte >= 128, 561 * it's a 8 byte event. 562 * 563 * The events are documented at the end of this file. 564 * 565 * Normal events (4 bytes) 566 * There is also a 8 byte version of most of the 4 byte events. The 567 * 8 byte one is recommended. 568 */ 569 #define SEQ_NOTEOFF 0 570 #define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */ 571 #define SEQ_NOTEON 1 572 #define SEQ_FMNOTEON SEQ_NOTEON 573 #define SEQ_WAIT TMR_WAIT_ABS 574 #define SEQ_PGMCHANGE 3 575 #define SEQ_FMPGMCHANGE SEQ_PGMCHANGE 576 #define SEQ_SYNCTIMER TMR_START 577 #define SEQ_MIDIPUTC 5 578 #define SEQ_DRUMON 6 /*** OBSOLETE ***/ 579 #define SEQ_DRUMOFF 7 /*** OBSOLETE ***/ 580 #define SEQ_ECHO TMR_ECHO /* For synching programs with output */ 581 #define SEQ_AFTERTOUCH 9 582 #define SEQ_CONTROLLER 10 583 584 /* 585 * Midi controller numbers 586 * 587 * Controllers 0 to 31 (0x00 to 0x1f) and 32 to 63 (0x20 to 0x3f) 588 * are continuous controllers. 589 * In the MIDI 1.0 these controllers are sent using two messages. 590 * Controller numbers 0 to 31 are used to send the MSB and the 591 * controller numbers 32 to 63 are for the LSB. Note that just 7 bits 592 * are used in MIDI bytes. 593 */ 594 595 #define CTL_BANK_SELECT 0x00 596 #define CTL_MODWHEEL 0x01 597 #define CTL_BREATH 0x02 598 /* undefined 0x03 */ 599 #define CTL_FOOT 0x04 600 #define CTL_PORTAMENTO_TIME 0x05 601 #define CTL_DATA_ENTRY 0x06 602 #define CTL_MAIN_VOLUME 0x07 603 #define CTL_BALANCE 0x08 604 /* undefined 0x09 */ 605 #define CTL_PAN 0x0a 606 #define CTL_EXPRESSION 0x0b 607 /* undefined 0x0c - 0x0f */ 608 #define CTL_GENERAL_PURPOSE1 0x10 609 #define CTL_GENERAL_PURPOSE2 0x11 610 #define CTL_GENERAL_PURPOSE3 0x12 611 #define CTL_GENERAL_PURPOSE4 0x13 612 /* undefined 0x14 - 0x1f */ 613 614 /* undefined 0x20 */ 615 616 /* 617 * The controller numbers 0x21 to 0x3f are reserved for the 618 * least significant bytes of the controllers 0x00 to 0x1f. 619 * These controllers are not recognised by the driver. 620 * 621 * Controllers 64 to 69 (0x40 to 0x45) are on/off switches. 622 * 0=OFF and 127=ON (intermediate values are possible) 623 */ 624 #define CTL_DAMPER_PEDAL 0x40 625 #define CTL_SUSTAIN CTL_DAMPER_PEDAL /* Alias */ 626 #define CTL_HOLD CTL_DAMPER_PEDAL /* Alias */ 627 #define CTL_PORTAMENTO 0x41 628 #define CTL_SOSTENUTO 0x42 629 #define CTL_SOFT_PEDAL 0x43 630 /* undefined 0x44 */ 631 #define CTL_HOLD2 0x45 632 /* undefined 0x46 - 0x4f */ 633 634 #define CTL_GENERAL_PURPOSE5 0x50 635 #define CTL_GENERAL_PURPOSE6 0x51 636 #define CTL_GENERAL_PURPOSE7 0x52 637 #define CTL_GENERAL_PURPOSE8 0x53 638 /* undefined 0x54 - 0x5a */ 639 #define CTL_EXT_EFF_DEPTH 0x5b 640 #define CTL_TREMOLO_DEPTH 0x5c 641 #define CTL_CHORUS_DEPTH 0x5d 642 #define CTL_DETUNE_DEPTH 0x5e 643 #define CTL_CELESTE_DEPTH CTL_DETUNE_DEPTH /* Alias for the above one */ 644 #define CTL_PHASER_DEPTH 0x5f 645 #define CTL_DATA_INCREMENT 0x60 646 #define CTL_DATA_DECREMENT 0x61 647 #define CTL_NONREG_PARM_NUM_LSB 0x62 648 #define CTL_NONREG_PARM_NUM_MSB 0x63 649 #define CTL_REGIST_PARM_NUM_LSB 0x64 650 #define CTL_REGIST_PARM_NUM_MSB 0x65 651 /* undefined 0x66 - 0x78 */ 652 /* reserved 0x79 - 0x7f */ 653 654 /* Pseudo controllers (not midi compatible) */ 655 #define CTRL_PITCH_BENDER 255 656 #define CTRL_PITCH_BENDER_RANGE 254 657 #define CTRL_EXPRESSION 253 /* Obsolete */ 658 #define CTRL_MAIN_VOLUME 252 /* Obsolete */ 659 660 #define SEQ_BALANCE 11 661 #define SEQ_VOLMODE 12 662 663 /* 664 * Volume mode decides how volumes are used 665 */ 666 667 #define VOL_METHOD_ADAGIO 1 668 #define VOL_METHOD_LINEAR 2 669 670 /* 671 * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as 672 * input events. 673 */ 674 675 /* 676 * Event codes 0xf0 to 0xfc are reserved for future extensions. 677 */ 678 679 #define SEQ_FULLSIZE 0xfd /* Long events */ 680 /* 681 * SEQ_FULLSIZE events are used for loading patches/samples to the 682 * synthesizer devices. These events are passed directly to the driver 683 * of the associated synthesizer device. There is no limit to the size 684 * of the extended events. These events are not queued but executed 685 * immediately when the write() is called (execution can take several 686 * seconds of time). 687 * 688 * When a SEQ_FULLSIZE message is written to the device, it must 689 * be written using exactly one write() call. Other events cannot 690 * be mixed to the same write. 691 * 692 * For FM synths (YM3812/OPL3) use struct sbi_instrument and write 693 * it to the /dev/sequencer. Don't write other data together with 694 * the instrument structure Set the key field of the structure to 695 * FM_PATCH. The device field is used to route the patch to the 696 * corresponding device. 697 * 698 * For Gravis UltraSound use struct patch_info. Initialize the key field 699 * to GUS_PATCH. 700 */ 701 #define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */ 702 #define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */ 703 704 /* 705 * Record for FM patches 706 */ 707 708 typedef u_char sbi_instr_data[32]; 709 710 struct sbi_instrument { 711 u_short key; /* FM_PATCH or OPL3_PATCH */ 712 #define FM_PATCH _PATCHKEY(0x01) 713 #define OPL3_PATCH _PATCHKEY(0x03) 714 short device; /* Synth# (0-4) */ 715 int channel; /* Program# to be initialized */ 716 sbi_instr_data operators; /* Reg. settings for operator cells 717 * (.SBI format) */ 718 }; 719 720 struct synth_info { /* Read only */ 721 char name[30]; 722 int device; /* 0-N. INITIALIZE BEFORE CALLING */ 723 int synth_type; 724 #define SYNTH_TYPE_FM 0 725 #define SYNTH_TYPE_SAMPLE 1 726 #define SYNTH_TYPE_MIDI 2 /* Midi interface */ 727 728 int synth_subtype; 729 #define FM_TYPE_ADLIB 0x00 730 #define FM_TYPE_OPL3 0x01 731 #define MIDI_TYPE_MPU401 0x401 732 733 #define SAMPLE_TYPE_BASIC 0x10 734 #define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC 735 #define SAMPLE_TYPE_AWE32 0x20 736 737 int perc_mode; /* No longer supported */ 738 int nr_voices; 739 int nr_drums; /* Obsolete field */ 740 int instr_bank_size; 741 u_long capabilities; 742 #define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */ 743 #define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */ 744 #define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */ 745 int dummies[19]; /* Reserve space */ 746 }; 747 748 struct sound_timer_info { 749 char name[32]; 750 int caps; 751 }; 752 753 struct midi_info { 754 char name[30]; 755 int device; /* 0-N. INITIALIZE BEFORE CALLING */ 756 u_long capabilities; /* To be defined later */ 757 int dev_type; 758 int dummies[18]; /* Reserve space */ 759 }; 760 761 /* 762 * ioctl commands for the /dev/midi## 763 */ 764 typedef struct { 765 u_char cmd; 766 char nr_args, nr_returns; 767 u_char data[30]; 768 } mpu_command_rec; 769 770 #define SNDCTL_MIDI_PRETIME _IOWR('m', 0, int) 771 #define SNDCTL_MIDI_MPUMODE _IOWR('m', 1, int) 772 #define SNDCTL_MIDI_MPUCMD _IOWR('m', 2, mpu_command_rec) 773 #define MIOSPASSTHRU _IOWR('m', 3, int) 774 #define MIOGPASSTHRU _IOWR('m', 4, int) 775 776 /* 777 * IOCTL commands for /dev/dsp and /dev/audio 778 */ 779 780 #define SNDCTL_DSP_HALT _IO ('P', 0) 781 #define SNDCTL_DSP_RESET SNDCTL_DSP_HALT 782 #define SNDCTL_DSP_SYNC _IO ('P', 1) 783 #define SNDCTL_DSP_SPEED _IOWR('P', 2, int) 784 #define SNDCTL_DSP_STEREO _IOWR('P', 3, int) 785 #define SNDCTL_DSP_GETBLKSIZE _IOR('P', 4, int) 786 #define SNDCTL_DSP_SETBLKSIZE _IOW('P', 4, int) 787 #define SNDCTL_DSP_SETFMT _IOWR('P',5, int) /* Selects ONE fmt*/ 788 789 /* 790 * SOUND_PCM_WRITE_CHANNELS is not that different 791 * from SNDCTL_DSP_STEREO 792 */ 793 #define SOUND_PCM_WRITE_CHANNELS _IOWR('P', 6, int) 794 #define SNDCTL_DSP_CHANNELS SOUND_PCM_WRITE_CHANNELS 795 #define SOUND_PCM_WRITE_FILTER _IOWR('P', 7, int) 796 #define SNDCTL_DSP_POST _IO ('P', 8) 797 798 /* 799 * SNDCTL_DSP_SETBLKSIZE and the following two calls mostly do 800 * the same thing, i.e. set the block size used in DMA transfers. 801 */ 802 #define SNDCTL_DSP_SUBDIVIDE _IOWR('P', 9, int) 803 #define SNDCTL_DSP_SETFRAGMENT _IOWR('P',10, int) 804 805 806 #define SNDCTL_DSP_GETFMTS _IOR ('P',11, int) /* Returns a mask */ 807 /* 808 * Buffer status queries. 809 */ 810 typedef struct audio_buf_info { 811 int fragments; /* # of avail. frags (partly used ones not counted) */ 812 int fragstotal; /* Total # of fragments allocated */ 813 int fragsize; /* Size of a fragment in bytes */ 814 815 int bytes; /* Avail. space in bytes (includes partly used fragments) */ 816 /* Note! 'bytes' could be more than fragments*fragsize */ 817 } audio_buf_info; 818 819 #define SNDCTL_DSP_GETOSPACE _IOR ('P',12, audio_buf_info) 820 #define SNDCTL_DSP_GETISPACE _IOR ('P',13, audio_buf_info) 821 822 /* 823 * SNDCTL_DSP_NONBLOCK is the same (but less powerful, since the 824 * action cannot be undone) of FIONBIO. The same can be achieved 825 * by opening the device with O_NDELAY 826 */ 827 #define SNDCTL_DSP_NONBLOCK _IO ('P',14) 828 829 #define SNDCTL_DSP_GETCAPS _IOR ('P',15, int) 830 # define PCM_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */ 831 # define PCM_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */ 832 # define PCM_CAP_REALTIME 0x00000200 /* Not in use */ 833 # define PCM_CAP_BATCH 0x00000400 /* Device has some kind of */ 834 /* internal buffers which may */ 835 /* cause some delays and */ 836 /* decrease precision of timing */ 837 # define PCM_CAP_COPROC 0x00000800 /* Has a coprocessor */ 838 /* Sometimes it's a DSP */ 839 /* but usually not */ 840 # define PCM_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */ 841 # define PCM_CAP_MMAP 0x00002000 /* Supports mmap() */ 842 # define PCM_CAP_MULTI 0x00004000 /* Supports multiple open */ 843 # define PCM_CAP_BIND 0x00008000 /* Supports binding to front/rear/center/lfe */ 844 # define PCM_CAP_INPUT 0x00010000 /* Supports recording */ 845 # define PCM_CAP_OUTPUT 0x00020000 /* Supports playback */ 846 # define PCM_CAP_VIRTUAL 0x00040000 /* Virtual device */ 847 /* 0x00040000 and 0x00080000 reserved for future use */ 848 849 /* Analog/digital control capabilities */ 850 # define PCM_CAP_ANALOGOUT 0x00100000 851 # define PCM_CAP_ANALOGIN 0x00200000 852 # define PCM_CAP_DIGITALOUT 0x00400000 853 # define PCM_CAP_DIGITALIN 0x00800000 854 # define PCM_CAP_ADMASK 0x00f00000 855 /* 856 * NOTE! (capabilities & PCM_CAP_ADMASK)==0 means just that the 857 * digital/analog interface control features are not supported by the 858 * device/driver. However the device still supports analog, digital or 859 * both inputs/outputs (depending on the device). See the OSS Programmer's 860 * Guide for full details. 861 */ 862 # define PCM_CAP_SPECIAL 0x01000000 /* Not for ordinary "multimedia" use */ 863 # define PCM_CAP_SHADOW 0x00000000 /* OBSOLETE */ 864 865 /* 866 * Preferred channel usage. These bits can be used to 867 * give recommendations to the application. Used by few drivers. 868 * For example if ((caps & DSP_CH_MASK) == DSP_CH_MONO) means that 869 * the device works best in mono mode. However it doesn't necessarily mean 870 * that the device cannot be used in stereo. These bits should only be used 871 * by special applications such as multi track hard disk recorders to find 872 * out the initial setup. However the user should be able to override this 873 * selection. 874 * 875 * To find out which modes are actually supported the application should 876 * try to select them using SNDCTL_DSP_CHANNELS. 877 */ 878 # define DSP_CH_MASK 0x06000000 /* Mask */ 879 # define DSP_CH_ANY 0x00000000 /* No preferred mode */ 880 # define DSP_CH_MONO 0x02000000 881 # define DSP_CH_STEREO 0x04000000 882 # define DSP_CH_MULTI 0x06000000 /* More than two channels */ 883 884 # define PCM_CAP_HIDDEN 0x08000000 /* Hidden device */ 885 # define PCM_CAP_FREERATE 0x10000000 886 # define PCM_CAP_MODEM 0x20000000 /* Modem device */ 887 # define PCM_CAP_DEFAULT 0x40000000 /* "Default" device */ 888 889 /* 890 * The PCM_CAP_* capability names were known as DSP_CAP_* prior OSS 4.0 891 * so it's necessary to define the older names too. 892 */ 893 #define DSP_CAP_ADMASK PCM_CAP_ADMASK 894 #define DSP_CAP_ANALOGIN PCM_CAP_ANALOGIN 895 #define DSP_CAP_ANALOGOUT PCM_CAP_ANALOGOUT 896 #define DSP_CAP_BATCH PCM_CAP_BATCH 897 #define DSP_CAP_BIND PCM_CAP_BIND 898 #define DSP_CAP_COPROC PCM_CAP_COPROC 899 #define DSP_CAP_DEFAULT PCM_CAP_DEFAULT 900 #define DSP_CAP_DIGITALIN PCM_CAP_DIGITALIN 901 #define DSP_CAP_DIGITALOUT PCM_CAP_DIGITALOUT 902 #define DSP_CAP_DUPLEX PCM_CAP_DUPLEX 903 #define DSP_CAP_FREERATE PCM_CAP_FREERATE 904 #define DSP_CAP_HIDDEN PCM_CAP_HIDDEN 905 #define DSP_CAP_INPUT PCM_CAP_INPUT 906 #define DSP_CAP_MMAP PCM_CAP_MMAP 907 #define DSP_CAP_MODEM PCM_CAP_MODEM 908 #define DSP_CAP_MULTI PCM_CAP_MULTI 909 #define DSP_CAP_OUTPUT PCM_CAP_OUTPUT 910 #define DSP_CAP_REALTIME PCM_CAP_REALTIME 911 #define DSP_CAP_REVISION PCM_CAP_REVISION 912 #define DSP_CAP_SHADOW PCM_CAP_SHADOW 913 #define DSP_CAP_TRIGGER PCM_CAP_TRIGGER 914 #define DSP_CAP_VIRTUAL PCM_CAP_VIRTUAL 915 916 /* 917 * What do these function do ? 918 */ 919 #define SNDCTL_DSP_GETTRIGGER _IOR ('P',16, int) 920 #define SNDCTL_DSP_SETTRIGGER _IOW ('P',16, int) 921 #define PCM_ENABLE_INPUT 0x00000001 922 #define PCM_ENABLE_OUTPUT 0x00000002 923 924 typedef struct count_info { 925 int bytes; /* Total # of bytes processed */ 926 int blocks; /* # of fragment transitions since last time */ 927 int ptr; /* Current DMA pointer value */ 928 } count_info; 929 930 /* 931 * GETIPTR and GETISPACE are not that different... same for out. 932 */ 933 #define SNDCTL_DSP_GETIPTR _IOR ('P',17, count_info) 934 #define SNDCTL_DSP_GETOPTR _IOR ('P',18, count_info) 935 936 typedef struct buffmem_desc { 937 caddr_t buffer; 938 int size; 939 } buffmem_desc; 940 941 #define SNDCTL_DSP_MAPINBUF _IOR ('P', 19, buffmem_desc) 942 #define SNDCTL_DSP_MAPOUTBUF _IOR ('P', 20, buffmem_desc) 943 #define SNDCTL_DSP_SETSYNCRO _IO ('P', 21) 944 #define SNDCTL_DSP_SETDUPLEX _IO ('P', 22) 945 #define SNDCTL_DSP_GETODELAY _IOR ('P', 23, int) 946 947 /* 948 * I guess these are the readonly version of the same 949 * functions that exist above as SNDCTL_DSP_... 950 */ 951 #define SOUND_PCM_READ_RATE _IOR ('P', 2, int) 952 #define SOUND_PCM_READ_CHANNELS _IOR ('P', 6, int) 953 #define SOUND_PCM_READ_BITS _IOR ('P', 5, int) 954 #define SOUND_PCM_READ_FILTER _IOR ('P', 7, int) 955 956 /* 957 * ioctl calls to be used in communication with coprocessors and 958 * DSP chips. 959 */ 960 961 typedef struct copr_buffer { 962 int command; /* Set to 0 if not used */ 963 int flags; 964 #define CPF_NONE 0x0000 965 #define CPF_FIRST 0x0001 /* First block */ 966 #define CPF_LAST 0x0002 /* Last block */ 967 int len; 968 int offs; /* If required by the device (0 if not used) */ 969 970 u_char data[4000]; /* NOTE! 4000 is not 4k */ 971 } copr_buffer; 972 973 typedef struct copr_debug_buf { 974 int command; /* Used internally. Set to 0 */ 975 int parm1; 976 int parm2; 977 int flags; 978 int len; /* Length of data in bytes */ 979 } copr_debug_buf; 980 981 typedef struct copr_msg { 982 int len; 983 u_char data[4000]; 984 } copr_msg; 985 986 #define SNDCTL_COPR_RESET _IO ('C', 0) 987 #define SNDCTL_COPR_LOAD _IOWR('C', 1, copr_buffer) 988 #define SNDCTL_COPR_RDATA _IOWR('C', 2, copr_debug_buf) 989 #define SNDCTL_COPR_RCODE _IOWR('C', 3, copr_debug_buf) 990 #define SNDCTL_COPR_WDATA _IOW ('C', 4, copr_debug_buf) 991 #define SNDCTL_COPR_WCODE _IOW ('C', 5, copr_debug_buf) 992 #define SNDCTL_COPR_RUN _IOWR('C', 6, copr_debug_buf) 993 #define SNDCTL_COPR_HALT _IOWR('C', 7, copr_debug_buf) 994 #define SNDCTL_COPR_SENDMSG _IOW ('C', 8, copr_msg) 995 #define SNDCTL_COPR_RCVMSG _IOR ('C', 9, copr_msg) 996 997 /* 998 * IOCTL commands for /dev/mixer 999 */ 1000 1001 /* 1002 * Mixer devices 1003 * 1004 * There can be up to 20 different analog mixer channels. The 1005 * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 1006 * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells 1007 * the devices supported by the particular mixer. 1008 */ 1009 1010 #define SOUND_MIXER_NRDEVICES 25 1011 #define SOUND_MIXER_VOLUME 0 /* Master output level */ 1012 #define SOUND_MIXER_BASS 1 /* Treble level of all output channels */ 1013 #define SOUND_MIXER_TREBLE 2 /* Bass level of all output channels */ 1014 #define SOUND_MIXER_SYNTH 3 /* Volume of synthesier input */ 1015 #define SOUND_MIXER_PCM 4 /* Output level for the audio device */ 1016 #define SOUND_MIXER_SPEAKER 5 /* Output level for the PC speaker 1017 * signals */ 1018 #define SOUND_MIXER_LINE 6 /* Volume level for the line in jack */ 1019 #define SOUND_MIXER_MIC 7 /* Volume for the signal coming from 1020 * the microphone jack */ 1021 #define SOUND_MIXER_CD 8 /* Volume level for the input signal 1022 * connected to the CD audio input */ 1023 #define SOUND_MIXER_IMIX 9 /* Recording monitor. It controls the 1024 * output volume of the selected 1025 * recording sources while recording */ 1026 #define SOUND_MIXER_ALTPCM 10 /* Volume of the alternative codec 1027 * device */ 1028 #define SOUND_MIXER_RECLEV 11 /* Global recording level */ 1029 #define SOUND_MIXER_IGAIN 12 /* Input gain */ 1030 #define SOUND_MIXER_OGAIN 13 /* Output gain */ 1031 /* 1032 * The AD1848 codec and compatibles have three line level inputs 1033 * (line, aux1 and aux2). Since each card manufacturer have assigned 1034 * different meanings to these inputs, it's inpractical to assign 1035 * specific meanings (line, cd, synth etc.) to them. 1036 */ 1037 #define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */ 1038 #define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */ 1039 #define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */ 1040 #define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */ 1041 #define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */ 1042 #define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */ 1043 #define SOUND_MIXER_PHONEIN 20 /* Phone input */ 1044 #define SOUND_MIXER_PHONEOUT 21 /* Phone output */ 1045 #define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */ 1046 #define SOUND_MIXER_RADIO 23 /* Radio in */ 1047 #define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */ 1048 1049 1050 /* 1051 * Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) 1052 * Not counted to SOUND_MIXER_NRDEVICES, but use the same number space 1053 */ 1054 #define SOUND_ONOFF_MIN 28 1055 #define SOUND_ONOFF_MAX 30 1056 #define SOUND_MIXER_MUTE 28 /* 0 or 1 */ 1057 #define SOUND_MIXER_ENHANCE 29 /* Enhanced stereo (0, 40, 60 or 80) */ 1058 #define SOUND_MIXER_LOUD 30 /* 0 or 1 */ 1059 1060 /* Note! Number 31 cannot be used since the sign bit is reserved */ 1061 #define SOUND_MIXER_NONE 31 1062 1063 #define SOUND_DEVICE_LABELS { \ 1064 "Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \ 1065 "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \ 1066 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \ 1067 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"} 1068 1069 #define SOUND_DEVICE_NAMES { \ 1070 "vol", "bass", "treble", "synth", "pcm", "speaker", "line", \ 1071 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \ 1072 "line1", "line2", "line3", "dig1", "dig2", "dig3", \ 1073 "phin", "phout", "video", "radio", "monitor"} 1074 1075 /* Device bitmask identifiers */ 1076 1077 #define SOUND_MIXER_RECSRC 0xff /* 1 bit per recording source */ 1078 #define SOUND_MIXER_DEVMASK 0xfe /* 1 bit per supported device */ 1079 #define SOUND_MIXER_RECMASK 0xfd /* 1 bit per supp. recording source */ 1080 #define SOUND_MIXER_CAPS 0xfc 1081 #define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only 1 rec. src at a time */ 1082 #define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */ 1083 1084 /* Device mask bits */ 1085 1086 #define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME) 1087 #define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS) 1088 #define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE) 1089 #define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH) 1090 #define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM) 1091 #define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER) 1092 #define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE) 1093 #define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC) 1094 #define SOUND_MASK_CD (1 << SOUND_MIXER_CD) 1095 #define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX) 1096 #define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM) 1097 #define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV) 1098 #define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN) 1099 #define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN) 1100 #define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1) 1101 #define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2) 1102 #define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3) 1103 #define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1) 1104 #define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2) 1105 #define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3) 1106 #define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN) 1107 #define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT) 1108 #define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO) 1109 #define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO) 1110 #define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR) 1111 1112 /* Obsolete macros */ 1113 #define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE) 1114 #define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE) 1115 #define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD) 1116 1117 #define MIXER_READ(dev) _IOR('M', dev, int) 1118 #define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME) 1119 #define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS) 1120 #define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE) 1121 #define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH) 1122 #define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM) 1123 #define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER) 1124 #define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE) 1125 #define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC) 1126 #define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD) 1127 #define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX) 1128 #define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM) 1129 #define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV) 1130 #define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN) 1131 #define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN) 1132 #define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1) 1133 #define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2) 1134 #define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3) 1135 #define SOUND_MIXER_READ_DIGITAL1 MIXER_READ(SOUND_MIXER_DIGITAL1) 1136 #define SOUND_MIXER_READ_DIGITAL2 MIXER_READ(SOUND_MIXER_DIGITAL2) 1137 #define SOUND_MIXER_READ_DIGITAL3 MIXER_READ(SOUND_MIXER_DIGITAL3) 1138 #define SOUND_MIXER_READ_PHONEIN MIXER_READ(SOUND_MIXER_PHONEIN) 1139 #define SOUND_MIXER_READ_PHONEOUT MIXER_READ(SOUND_MIXER_PHONEOUT) 1140 #define SOUND_MIXER_READ_RADIO MIXER_READ(SOUND_MIXER_RADIO) 1141 #define SOUND_MIXER_READ_VIDEO MIXER_READ(SOUND_MIXER_VIDEO) 1142 #define SOUND_MIXER_READ_MONITOR MIXER_READ(SOUND_MIXER_MONITOR) 1143 1144 /* Obsolete macros */ 1145 #define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE) 1146 #define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE) 1147 #define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD) 1148 1149 #define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC) 1150 #define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK) 1151 #define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK) 1152 #define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS) 1153 #define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS) 1154 1155 #define MIXER_WRITE(dev) _IOWR('M', dev, int) 1156 #define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME) 1157 #define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS) 1158 #define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE) 1159 #define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH) 1160 #define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM) 1161 #define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER) 1162 #define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE) 1163 #define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC) 1164 #define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD) 1165 #define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX) 1166 #define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM) 1167 #define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV) 1168 #define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN) 1169 #define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN) 1170 #define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1) 1171 #define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2) 1172 #define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3) 1173 #define SOUND_MIXER_WRITE_DIGITAL1 MIXER_WRITE(SOUND_MIXER_DIGITAL1) 1174 #define SOUND_MIXER_WRITE_DIGITAL2 MIXER_WRITE(SOUND_MIXER_DIGITAL2) 1175 #define SOUND_MIXER_WRITE_DIGITAL3 MIXER_WRITE(SOUND_MIXER_DIGITAL3) 1176 #define SOUND_MIXER_WRITE_PHONEIN MIXER_WRITE(SOUND_MIXER_PHONEIN) 1177 #define SOUND_MIXER_WRITE_PHONEOUT MIXER_WRITE(SOUND_MIXER_PHONEOUT) 1178 #define SOUND_MIXER_WRITE_RADIO MIXER_WRITE(SOUND_MIXER_RADIO) 1179 #define SOUND_MIXER_WRITE_VIDEO MIXER_WRITE(SOUND_MIXER_VIDEO) 1180 #define SOUND_MIXER_WRITE_MONITOR MIXER_WRITE(SOUND_MIXER_MONITOR) 1181 1182 #define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE) 1183 #define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE) 1184 #define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD) 1185 1186 #define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) 1187 1188 typedef struct mixer_info { 1189 char id[16]; 1190 char name[32]; 1191 int modify_counter; 1192 int fillers[10]; 1193 } mixer_info; 1194 1195 #define SOUND_MIXER_INFO _IOR('M', 101, mixer_info) 1196 1197 #define LEFT_CHN 0 1198 #define RIGHT_CHN 1 1199 1200 /* 1201 * Level 2 event types for /dev/sequencer 1202 */ 1203 1204 /* 1205 * The 4 most significant bits of byte 0 specify the class of 1206 * the event: 1207 * 1208 * 0x8X = system level events, 1209 * 0x9X = device/port specific events, event[1] = device/port, 1210 * The last 4 bits give the subtype: 1211 * 0x02 = Channel event (event[3] = chn). 1212 * 0x01 = note event (event[4] = note). 1213 * (0x01 is not used alone but always with bit 0x02). 1214 * event[2] = MIDI message code (0x80=note off etc.) 1215 * 1216 */ 1217 1218 #define EV_SEQ_LOCAL 0x80 1219 #define EV_TIMING 0x81 1220 #define EV_CHN_COMMON 0x92 1221 #define EV_CHN_VOICE 0x93 1222 #define EV_SYSEX 0x94 1223 /* 1224 * Event types 200 to 220 are reserved for application use. 1225 * These numbers will not be used by the driver. 1226 */ 1227 1228 /* 1229 * Events for event type EV_CHN_VOICE 1230 */ 1231 1232 #define MIDI_NOTEOFF 0x80 1233 #define MIDI_NOTEON 0x90 1234 #define MIDI_KEY_PRESSURE 0xA0 1235 1236 /* 1237 * Events for event type EV_CHN_COMMON 1238 */ 1239 1240 #define MIDI_CTL_CHANGE 0xB0 1241 #define MIDI_PGM_CHANGE 0xC0 1242 #define MIDI_CHN_PRESSURE 0xD0 1243 #define MIDI_PITCH_BEND 0xE0 1244 1245 #define MIDI_SYSTEM_PREFIX 0xF0 1246 1247 /* 1248 * Timer event types 1249 */ 1250 #define TMR_WAIT_REL 1 /* Time relative to the prev time */ 1251 #define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */ 1252 #define TMR_STOP 3 1253 #define TMR_START 4 1254 #define TMR_CONTINUE 5 1255 #define TMR_TEMPO 6 1256 #define TMR_ECHO 8 1257 #define TMR_CLOCK 9 /* MIDI clock */ 1258 #define TMR_SPP 10 /* Song position pointer */ 1259 #define TMR_TIMESIG 11 /* Time signature */ 1260 1261 /* 1262 * Local event types 1263 */ 1264 #define LOCL_STARTAUDIO 1 1265 1266 #if !defined(_KERNEL) || defined(USE_SEQ_MACROS) 1267 /* 1268 * Some convenience macros to simplify programming of the 1269 * /dev/sequencer interface 1270 * 1271 * These macros define the API which should be used when possible. 1272 */ 1273 1274 #ifndef USE_SIMPLE_MACROS 1275 void seqbuf_dump(void); /* This function must be provided by programs */ 1276 1277 /* Sample seqbuf_dump() implementation: 1278 * 1279 * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes 1280 * 1281 * int seqfd; -- The file descriptor for /dev/sequencer. 1282 * 1283 * void 1284 * seqbuf_dump () 1285 * { 1286 * if (_seqbufptr) 1287 * if (write (seqfd, _seqbuf, _seqbufptr) == -1) 1288 * { 1289 * perror ("write /dev/sequencer"); 1290 * exit (-1); 1291 * } 1292 * _seqbufptr = 0; 1293 * } 1294 */ 1295 1296 #define SEQ_DEFINEBUF(len) \ 1297 u_char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0 1298 #define SEQ_USE_EXTBUF() \ 1299 extern u_char _seqbuf[]; \ 1300 extern int _seqbuflen;extern int _seqbufptr 1301 #define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() 1302 #define SEQ_PM_DEFINES struct patmgr_info _pm_info 1303 #define _SEQ_NEEDBUF(len) \ 1304 if ((_seqbufptr+(len)) > _seqbuflen) \ 1305 seqbuf_dump() 1306 #define _SEQ_ADVBUF(len) _seqbufptr += len 1307 #define SEQ_DUMPBUF seqbuf_dump 1308 #else 1309 /* 1310 * This variation of the sequencer macros is used just to format one event 1311 * using fixed buffer. 1312 * 1313 * The program using the macro library must define the following macros before 1314 * using this library. 1315 * 1316 * #define _seqbuf name of the buffer (u_char[]) 1317 * #define _SEQ_ADVBUF(len) If the applic needs to know the exact 1318 * size of the event, this macro can be used. 1319 * Otherwise this must be defined as empty. 1320 * #define _seqbufptr Define the name of index variable or 0 if 1321 * not required. 1322 */ 1323 #define _SEQ_NEEDBUF(len) /* empty */ 1324 #endif 1325 1326 #define PM_LOAD_PATCH(dev, bank, pgm) \ 1327 (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ 1328 _pm_info.device=dev, _pm_info.data.data8[0]=pgm, \ 1329 _pm_info.parm1 = bank, _pm_info.parm2 = 1, \ 1330 ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info)) 1331 #define PM_LOAD_PATCHES(dev, bank, pgm) \ 1332 (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ 1333 _pm_info.device=dev, bcopy( pgm, _pm_info.data.data8, 128), \ 1334 _pm_info.parm1 = bank, _pm_info.parm2 = 128, \ 1335 ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info)) 1336 1337 #define SEQ_VOLUME_MODE(dev, mode) { \ 1338 _SEQ_NEEDBUF(8);\ 1339 _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ 1340 _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\ 1341 _seqbuf[_seqbufptr+2] = (dev);\ 1342 _seqbuf[_seqbufptr+3] = (mode);\ 1343 _seqbuf[_seqbufptr+4] = 0;\ 1344 _seqbuf[_seqbufptr+5] = 0;\ 1345 _seqbuf[_seqbufptr+6] = 0;\ 1346 _seqbuf[_seqbufptr+7] = 0;\ 1347 _SEQ_ADVBUF(8);} 1348 1349 /* 1350 * Midi voice messages 1351 */ 1352 1353 #define _CHN_VOICE(dev, event, chn, note, parm) { \ 1354 _SEQ_NEEDBUF(8);\ 1355 _seqbuf[_seqbufptr] = EV_CHN_VOICE;\ 1356 _seqbuf[_seqbufptr+1] = (dev);\ 1357 _seqbuf[_seqbufptr+2] = (event);\ 1358 _seqbuf[_seqbufptr+3] = (chn);\ 1359 _seqbuf[_seqbufptr+4] = (note);\ 1360 _seqbuf[_seqbufptr+5] = (parm);\ 1361 _seqbuf[_seqbufptr+6] = (0);\ 1362 _seqbuf[_seqbufptr+7] = 0;\ 1363 _SEQ_ADVBUF(8);} 1364 1365 #define SEQ_START_NOTE(dev, chn, note, vol) \ 1366 _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol) 1367 1368 #define SEQ_STOP_NOTE(dev, chn, note, vol) \ 1369 _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol) 1370 1371 #define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \ 1372 _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure) 1373 1374 /* 1375 * Midi channel messages 1376 */ 1377 1378 #define _CHN_COMMON(dev, event, chn, p1, p2, w14) { \ 1379 _SEQ_NEEDBUF(8);\ 1380 _seqbuf[_seqbufptr] = EV_CHN_COMMON;\ 1381 _seqbuf[_seqbufptr+1] = (dev);\ 1382 _seqbuf[_seqbufptr+2] = (event);\ 1383 _seqbuf[_seqbufptr+3] = (chn);\ 1384 _seqbuf[_seqbufptr+4] = (p1);\ 1385 _seqbuf[_seqbufptr+5] = (p2);\ 1386 *(short *)&_seqbuf[_seqbufptr+6] = (w14);\ 1387 _SEQ_ADVBUF(8);} 1388 /* 1389 * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits 1390 * sending any MIDI bytes but it's absolutely not possible. Trying to do 1391 * so _will_ cause problems with MPU401 intelligent mode). 1392 * 1393 * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 1394 * sent by calling SEQ_SYSEX() several times (there must be no other events 1395 * between them). First sysex fragment must have 0xf0 in the first byte 1396 * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte 1397 * between these sysex start and end markers cannot be larger than 0x7f. Also 1398 * lengths of each fragments (except the last one) must be 6. 1399 * 1400 * Breaking the above rules may work with some MIDI ports but is likely to 1401 * cause fatal problems with some other devices (such as MPU401). 1402 */ 1403 #define SEQ_SYSEX(dev, buf, len) { \ 1404 int i, l=(len); if (l>6)l=6;\ 1405 _SEQ_NEEDBUF(8);\ 1406 _seqbuf[_seqbufptr] = EV_SYSEX;\ 1407 for(i=0;i<l;i++)_seqbuf[_seqbufptr+i+1] = (buf)[i];\ 1408 for(i=l;i<6;i++)_seqbuf[_seqbufptr+i+1] = 0xff;\ 1409 _SEQ_ADVBUF(8);} 1410 1411 #define SEQ_CHN_PRESSURE(dev, chn, pressure) \ 1412 _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0) 1413 1414 #define SEQ_SET_PATCH(dev, chn, patch) \ 1415 _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0) 1416 1417 #define SEQ_CONTROL(dev, chn, controller, value) \ 1418 _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value) 1419 1420 #define SEQ_BENDER(dev, chn, value) \ 1421 _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value) 1422 1423 1424 #define SEQ_V2_X_CONTROL(dev, voice, controller, value) { \ 1425 _SEQ_NEEDBUF(8);\ 1426 _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ 1427 _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\ 1428 _seqbuf[_seqbufptr+2] = (dev);\ 1429 _seqbuf[_seqbufptr+3] = (voice);\ 1430 _seqbuf[_seqbufptr+4] = (controller);\ 1431 *(short *)&_seqbuf[_seqbufptr+5] = (value);\ 1432 _seqbuf[_seqbufptr+7] = 0;\ 1433 _SEQ_ADVBUF(8);} 1434 1435 /* 1436 * The following 5 macros are incorrectly implemented and obsolete. 1437 * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead. 1438 */ 1439 1440 #define SEQ_PITCHBEND(dev, voice, value) \ 1441 SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value) 1442 #define SEQ_BENDER_RANGE(dev, voice, value) \ 1443 SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value) 1444 #define SEQ_EXPRESSION(dev, voice, value) \ 1445 SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128) 1446 #define SEQ_MAIN_VOLUME(dev, voice, value) \ 1447 SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) 1448 #define SEQ_PANNING(dev, voice, pos) \ 1449 SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) 1450 1451 /* 1452 * Timing and synchronization macros 1453 */ 1454 1455 #define _TIMER_EVENT(ev, parm) { \ 1456 _SEQ_NEEDBUF(8);\ 1457 _seqbuf[_seqbufptr+0] = EV_TIMING; \ 1458 _seqbuf[_seqbufptr+1] = (ev); \ 1459 _seqbuf[_seqbufptr+2] = 0;\ 1460 _seqbuf[_seqbufptr+3] = 0;\ 1461 *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \ 1462 _SEQ_ADVBUF(8); \ 1463 } 1464 1465 #define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0) 1466 #define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0) 1467 #define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0) 1468 #define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks) 1469 #define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks) 1470 #define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key) 1471 #define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value) 1472 #define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos) 1473 #define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig) 1474 1475 /* 1476 * Local control events 1477 */ 1478 1479 #define _LOCAL_EVENT(ev, parm) { \ 1480 _SEQ_NEEDBUF(8);\ 1481 _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \ 1482 _seqbuf[_seqbufptr+1] = (ev); \ 1483 _seqbuf[_seqbufptr+2] = 0;\ 1484 _seqbuf[_seqbufptr+3] = 0;\ 1485 *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \ 1486 _SEQ_ADVBUF(8); \ 1487 } 1488 1489 #define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask) 1490 /* 1491 * Events for the level 1 interface only 1492 */ 1493 1494 #define SEQ_MIDIOUT(device, byte) { \ 1495 _SEQ_NEEDBUF(4);\ 1496 _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\ 1497 _seqbuf[_seqbufptr+1] = (byte);\ 1498 _seqbuf[_seqbufptr+2] = (device);\ 1499 _seqbuf[_seqbufptr+3] = 0;\ 1500 _SEQ_ADVBUF(4);} 1501 1502 /* 1503 * Patch loading. 1504 */ 1505 #define SEQ_WRPATCH(patchx, len) { \ 1506 if (_seqbufptr) seqbuf_dump(); \ 1507 if (write(seqfd, (char*)(patchx), len)==-1) \ 1508 perror("Write patch: /dev/sequencer"); \ 1509 } 1510 1511 #define SEQ_WRPATCH2(patchx, len) \ 1512 ( seqbuf_dump(), write(seqfd, (char*)(patchx), len) ) 1513 1514 #endif 1515 1516 /* 1517 * Here I have moved all the aliases for ioctl names. 1518 */ 1519 1520 #define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT 1521 #define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT 1522 #define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT 1523 1524 #define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED 1525 #define SOUND_PCM_POST SNDCTL_DSP_POST 1526 #define SOUND_PCM_RESET SNDCTL_DSP_RESET 1527 #define SOUND_PCM_SYNC SNDCTL_DSP_SYNC 1528 #define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE 1529 #define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT 1530 #define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS 1531 #define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE 1532 #define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE 1533 #define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK 1534 #define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS 1535 #define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER 1536 #define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER 1537 #define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO 1538 #define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR 1539 #define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR 1540 #define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF 1541 #define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF 1542 1543 /***********************************************************************/ 1544 1545 /** 1546 * XXX OSSv4 defines -- some bits taken straight out of the new 1547 * sys/soundcard.h bundled with recent OSS releases. 1548 * 1549 * NB: These macros and structures will be reorganized and inserted 1550 * in appropriate places throughout this file once the code begins 1551 * to take shape. 1552 * 1553 * @todo reorganize layout more like the 4Front version 1554 * @todo ask about maintaining __SIOWR vs. _IOWR ioctl cmd defines 1555 */ 1556 1557 /** 1558 * @note The @c OSSV4_EXPERIMENT macro is meant to wrap new development code 1559 * in the sound system relevant to adopting 4Front's OSSv4 specification. 1560 * Users should not enable this! Really! 1561 */ 1562 #if 0 1563 # define OSSV4_EXPERIMENT 1 1564 #else 1565 # undef OSSV4_EXPERIMENT 1566 #endif 1567 1568 #ifdef SOUND_VERSION 1569 # undef SOUND_VERSION 1570 # define SOUND_VERSION 0x040000 1571 #endif /* !SOUND_VERSION */ 1572 1573 #define OSS_LONGNAME_SIZE 64 1574 #define OSS_LABEL_SIZE 16 1575 #define OSS_DEVNODE_SIZE 32 1576 typedef char oss_longname_t[OSS_LONGNAME_SIZE]; 1577 typedef char oss_label_t[OSS_LABEL_SIZE]; 1578 typedef char oss_devnode_t[OSS_DEVNODE_SIZE]; 1579 1580 typedef struct audio_errinfo 1581 { 1582 int play_underruns; 1583 int rec_overruns; 1584 unsigned int play_ptradjust; 1585 unsigned int rec_ptradjust; 1586 int play_errorcount; 1587 int rec_errorcount; 1588 int play_lasterror; 1589 int rec_lasterror; 1590 long play_errorparm; 1591 long rec_errorparm; 1592 int filler[16]; 1593 } audio_errinfo; 1594 1595 #define SNDCTL_DSP_GETPLAYVOL _IOR ('P', 24, int) 1596 #define SNDCTL_DSP_SETPLAYVOL _IOWR('P', 24, int) 1597 #define SNDCTL_DSP_GETERROR _IOR ('P', 25, audio_errinfo) 1598 1599 1600 /* 1601 **************************************************************************** 1602 * Sync groups for audio devices 1603 */ 1604 typedef struct oss_syncgroup 1605 { 1606 int id; 1607 int mode; 1608 int filler[16]; 1609 } oss_syncgroup; 1610 1611 #define SNDCTL_DSP_SYNCGROUP _IOWR('P', 28, oss_syncgroup) 1612 #define SNDCTL_DSP_SYNCSTART _IOW ('P', 29, int) 1613 1614 /* 1615 ************************************************************************** 1616 * "cooked" mode enables software based conversions for sample rate, sample 1617 * format (bits) and number of channels (mono/stereo). These conversions are 1618 * required with some devices that support only one sample rate or just stereo 1619 * to let the applications to use other formats. The cooked mode is enabled by 1620 * default. However it's necessary to disable this mode when mmap() is used or 1621 * when very deterministic timing is required. SNDCTL_DSP_COOKEDMODE is an 1622 * optional call introduced in OSS 3.9.6f. It's _error return must be ignored_ 1623 * since normally this call will return erno=EINVAL. 1624 * 1625 * SNDCTL_DSP_COOKEDMODE must be called immediately after open before doing 1626 * anything else. Otherwise the call will not have any effect. 1627 */ 1628 #define SNDCTL_DSP_COOKEDMODE _IOW ('P', 30, int) 1629 1630 /* 1631 ************************************************************************** 1632 * SNDCTL_DSP_SILENCE and SNDCTL_DSP_SKIP are new calls in OSS 3.99.0 1633 * that can be used to implement pause/continue during playback (no effect 1634 * on recording). 1635 */ 1636 #define SNDCTL_DSP_SILENCE _IO ('P', 31) 1637 #define SNDCTL_DSP_SKIP _IO ('P', 32) 1638 1639 /* 1640 **************************************************************************** 1641 * Abort transfer (reset) functions for input and output 1642 */ 1643 #define SNDCTL_DSP_HALT_INPUT _IO ('P', 33) 1644 #define SNDCTL_DSP_RESET_INPUT SNDCTL_DSP_HALT_INPUT /* Old name */ 1645 #define SNDCTL_DSP_HALT_OUTPUT _IO ('P', 34) 1646 #define SNDCTL_DSP_RESET_OUTPUT SNDCTL_DSP_HALT_OUTPUT /* Old name */ 1647 1648 /* 1649 **************************************************************************** 1650 * Low water level control 1651 */ 1652 #define SNDCTL_DSP_LOW_WATER _IOW ('P', 34, int) 1653 1654 /** @todo Get rid of OSS_NO_LONG_LONG references? */ 1655 1656 /* 1657 **************************************************************************** 1658 * 64 bit pointer support. Only available in environments that support 1659 * the 64 bit (long long) integer type. 1660 */ 1661 #ifndef OSS_NO_LONG_LONG 1662 typedef struct 1663 { 1664 long long samples; 1665 int fifo_samples; 1666 int filler[32]; /* For future use */ 1667 } oss_count_t; 1668 1669 #define SNDCTL_DSP_CURRENT_IPTR _IOR ('P', 35, oss_count_t) 1670 #define SNDCTL_DSP_CURRENT_OPTR _IOR ('P', 36, oss_count_t) 1671 #endif 1672 1673 /* 1674 **************************************************************************** 1675 * Interface for selecting recording sources and playback output routings. 1676 */ 1677 #define SNDCTL_DSP_GET_RECSRC_NAMES _IOR ('P', 37, oss_mixer_enuminfo) 1678 #define SNDCTL_DSP_GET_RECSRC _IOR ('P', 38, int) 1679 #define SNDCTL_DSP_SET_RECSRC _IOWR('P', 38, int) 1680 1681 #define SNDCTL_DSP_GET_PLAYTGT_NAMES _IOR ('P', 39, oss_mixer_enuminfo) 1682 #define SNDCTL_DSP_GET_PLAYTGT _IOR ('P', 40, int) 1683 #define SNDCTL_DSP_SET_PLAYTGT _IOWR('P', 40, int) 1684 #define SNDCTL_DSP_GETRECVOL _IOR ('P', 41, int) 1685 #define SNDCTL_DSP_SETRECVOL _IOWR('P', 41, int) 1686 1687 /* 1688 *************************************************************************** 1689 * Some calls for setting the channel assignment with multi channel devices 1690 * (see the manual for details). */ 1691 #define SNDCTL_DSP_GET_CHNORDER _IOR ('P', 42, unsigned long long) 1692 #define SNDCTL_DSP_SET_CHNORDER _IOWR('P', 42, unsigned long long) 1693 # define CHID_UNDEF 0 1694 # define CHID_L 1 1695 # define CHID_R 2 1696 # define CHID_C 3 1697 # define CHID_LFE 4 1698 # define CHID_LS 5 1699 # define CHID_RS 6 1700 # define CHID_LR 7 1701 # define CHID_RR 8 1702 #define CHNORDER_UNDEF 0x0000000000000000ULL 1703 #define CHNORDER_NORMAL 0x0000000087654321ULL 1704 1705 #define MAX_PEAK_CHANNELS 128 1706 typedef unsigned short oss_peaks_t[MAX_PEAK_CHANNELS]; 1707 #define SNDCTL_DSP_GETIPEAKS _IOR('P', 43, oss_peaks_t) 1708 #define SNDCTL_DSP_GETOPEAKS _IOR('P', 44, oss_peaks_t) 1709 #define SNDCTL_DSP_POLICY _IOW('P', 45, int) /* See the manual */ 1710 1711 /* 1712 **************************************************************************** 1713 * Few ioctl calls that are not official parts of OSS. They have been used 1714 * by few freeware implementations of OSS. 1715 */ 1716 #define SNDCTL_DSP_GETCHANNELMASK _IOWR('P', 64, int) 1717 #define SNDCTL_DSP_BIND_CHANNEL _IOWR('P', 65, int) 1718 #define DSP_BIND_QUERY 0x00000000 1719 #define DSP_BIND_FRONT 0x00000001 1720 #define DSP_BIND_SURR 0x00000002 1721 #define DSP_BIND_CENTER_LFE 0x00000004 1722 #define DSP_BIND_HANDSET 0x00000008 1723 #define DSP_BIND_MIC 0x00000010 1724 #define DSP_BIND_MODEM1 0x00000020 1725 #define DSP_BIND_MODEM2 0x00000040 1726 #define DSP_BIND_I2S 0x00000080 1727 #define DSP_BIND_SPDIF 0x00000100 1728 #define DSP_BIND_REAR 0x00000200 1729 1730 /* 1731 * OSS_SYSIFO is obsolete. Use SNDCTL_SYSINFO insteads. 1732 */ 1733 #define OSS_GETVERSION _IOR ('M', 118, int) 1734 1735 /** 1736 * @brief Argument for SNDCTL_SYSINFO ioctl. 1737 * 1738 * For use w/ the SNDCTL_SYSINFO ioctl available on audio (/dev/dsp*), 1739 * mixer, and MIDI devices. 1740 */ 1741 typedef struct oss_sysinfo 1742 { 1743 char product[32]; /* For example OSS/Free, OSS/Linux or 1744 OSS/Solaris */ 1745 char version[32]; /* For example 4.0a */ 1746 int versionnum; /* See OSS_GETVERSION */ 1747 char options[128]; /* Reserved */ 1748 1749 int numaudios; /* # of audio/dsp devices */ 1750 int openedaudio[8]; /* Bit mask telling which audio devices 1751 are busy */ 1752 1753 int numsynths; /* # of availavle synth devices */ 1754 int nummidis; /* # of available MIDI ports */ 1755 int numtimers; /* # of available timer devices */ 1756 int nummixers; /* # of mixer devices */ 1757 1758 int openedmidi[8]; /* Bit mask telling which midi devices 1759 are busy */ 1760 int numcards; /* Number of sound cards in the system */ 1761 int numaudioengines; /* Number of audio engines in the system */ 1762 char license[16]; /* For example "GPL" or "CDDL" */ 1763 char revision_info[256]; /* For internal use */ 1764 int filler[172]; /* For future expansion (set to -1) */ 1765 } oss_sysinfo; 1766 1767 typedef struct oss_mixext 1768 { 1769 int dev; /* Mixer device number */ 1770 int ctrl; /* Controller number */ 1771 int type; /* Entry type */ 1772 # define MIXT_DEVROOT 0 /* Device root entry */ 1773 # define MIXT_GROUP 1 /* Controller group */ 1774 # define MIXT_ONOFF 2 /* OFF (0) or ON (1) */ 1775 # define MIXT_ENUM 3 /* Enumerated (0 to maxvalue) */ 1776 # define MIXT_MONOSLIDER 4 /* Mono slider (0 to 100) */ 1777 # define MIXT_STEREOSLIDER 5 /* Stereo slider (dual 0 to 100) */ 1778 # define MIXT_MESSAGE 6 /* (Readable) textual message */ 1779 # define MIXT_MONOVU 7 /* VU meter value (mono) */ 1780 # define MIXT_STEREOVU 8 /* VU meter value (stereo) */ 1781 # define MIXT_MONOPEAK 9 /* VU meter peak value (mono) */ 1782 # define MIXT_STEREOPEAK 10 /* VU meter peak value (stereo) */ 1783 # define MIXT_RADIOGROUP 11 /* Radio button group */ 1784 # define MIXT_MARKER 12 /* Separator between normal and extension entries */ 1785 # define MIXT_VALUE 13 /* Decimal value entry */ 1786 # define MIXT_HEXVALUE 14 /* Hexadecimal value entry */ 1787 # define MIXT_MONODB 15 /* Mono atten. slider (0 to -144) */ 1788 # define MIXT_STEREODB 16 /* Stereo atten. slider (dual 0 to -144) */ 1789 # define MIXT_SLIDER 17 /* Slider (mono) with full integer range */ 1790 # define MIXT_3D 18 1791 1792 /* Possible value range (minvalue to maxvalue) */ 1793 /* Note that maxvalue may also be smaller than minvalue */ 1794 int maxvalue; 1795 int minvalue; 1796 1797 int flags; 1798 # define MIXF_READABLE 0x00000001 /* Has readable value */ 1799 # define MIXF_WRITEABLE 0x00000002 /* Has writeable value */ 1800 # define MIXF_POLL 0x00000004 /* May change itself */ 1801 # define MIXF_HZ 0x00000008 /* Herz scale */ 1802 # define MIXF_STRING 0x00000010 /* Use dynamic extensions for value */ 1803 # define MIXF_DYNAMIC 0x00000010 /* Supports dynamic extensions */ 1804 # define MIXF_OKFAIL 0x00000020 /* Interpret value as 1=OK, 0=FAIL */ 1805 # define MIXF_FLAT 0x00000040 /* Flat vertical space requirements */ 1806 # define MIXF_LEGACY 0x00000080 /* Legacy mixer control group */ 1807 char id[16]; /* Mnemonic ID (mainly for internal use) */ 1808 int parent; /* Entry# of parent (group) node (-1 if root) */ 1809 1810 int dummy; /* Internal use */ 1811 1812 int timestamp; 1813 1814 char data[64]; /* Misc data (entry type dependent) */ 1815 unsigned char enum_present[32]; /* Mask of allowed enum values */ 1816 int control_no; /* SOUND_MIXER_VOLUME..SOUND_MIXER_MIDI */ 1817 /* (-1 means not indicated) */ 1818 1819 /* 1820 * The desc field is reserved for internal purposes of OSS. It should not be 1821 * used by applications. 1822 */ 1823 unsigned int desc; 1824 #define MIXEXT_SCOPE_MASK 0x0000003f 1825 #define MIXEXT_SCOPE_OTHER 0x00000000 1826 #define MIXEXT_SCOPE_INPUT 0x00000001 1827 #define MIXEXT_SCOPE_OUTPUT 0x00000002 1828 #define MIXEXT_SCOPE_MONITOR 0x00000003 1829 #define MIXEXT_SCOPE_RECSWITCH 0x00000004 1830 1831 char extname[32]; 1832 int update_counter; 1833 int filler[7]; 1834 } oss_mixext; 1835 1836 typedef struct oss_mixext_root 1837 { 1838 char id[16]; 1839 char name[48]; 1840 } oss_mixext_root; 1841 1842 typedef struct oss_mixer_value 1843 { 1844 int dev; 1845 int ctrl; 1846 int value; 1847 int flags; /* Reserved for future use. Initialize to 0 */ 1848 int timestamp; /* Must be set to oss_mixext.timestamp */ 1849 int filler[8]; /* Reserved for future use. Initialize to 0 */ 1850 } oss_mixer_value; 1851 1852 #define OSS_ENUM_MAXVALUE 255 1853 typedef struct oss_mixer_enuminfo 1854 { 1855 int dev; 1856 int ctrl; 1857 int nvalues; 1858 int version; /* Read the manual */ 1859 short strindex[OSS_ENUM_MAXVALUE]; 1860 char strings[3000]; 1861 } oss_mixer_enuminfo; 1862 1863 #define OPEN_READ PCM_ENABLE_INPUT 1864 #define OPEN_WRITE PCM_ENABLE_OUTPUT 1865 #define OPEN_READWRITE (OPEN_READ|OPEN_WRITE) 1866 1867 /** 1868 * @brief Argument for SNDCTL_AUDIOINFO ioctl. 1869 * 1870 * For use w/ the SNDCTL_AUDIOINFO ioctl available on audio (/dev/dsp*) 1871 * devices. 1872 */ 1873 typedef struct oss_audioinfo 1874 { 1875 int dev; /* Audio device number */ 1876 char name[64]; 1877 int busy; /* 0, OPEN_READ, OPEN_WRITE or OPEN_READWRITE */ 1878 int pid; 1879 int caps; /* DSP_CAP_INPUT, DSP_CAP_OUTPUT */ 1880 int iformats; 1881 int oformats; 1882 int magic; /* Reserved for internal use */ 1883 char cmd[64]; /* Command using the device (if known) */ 1884 int card_number; 1885 int port_number; 1886 int mixer_dev; 1887 int real_device; /* Obsolete field. Replaced by devnode */ 1888 int enabled; /* 1=enabled, 0=device not ready at this 1889 moment */ 1890 int flags; /* For internal use only - no practical 1891 meaning */ 1892 int min_rate; /* Sample rate limits */ 1893 int max_rate; 1894 int min_channels; /* Number of channels supported */ 1895 int max_channels; 1896 int binding; /* DSP_BIND_FRONT, etc. 0 means undefined */ 1897 int rate_source; 1898 char handle[32]; 1899 #define OSS_MAX_SAMPLE_RATES 20 /* Cannot be changed */ 1900 unsigned int nrates; 1901 unsigned int rates[OSS_MAX_SAMPLE_RATES]; /* Please read the manual before using these */ 1902 oss_longname_t song_name; /* Song name (if given) */ 1903 oss_label_t label; /* Device label (if given) */ 1904 int latency; /* In usecs, -1=unknown */ 1905 oss_devnode_t devnode; /* Device special file name (inside 1906 /dev) */ 1907 int next_play_engine; 1908 int next_rec_engine; 1909 int filler[184]; 1910 } oss_audioinfo; 1911 1912 typedef struct oss_mixerinfo 1913 { 1914 int dev; 1915 char id[16]; 1916 char name[32]; 1917 int modify_counter; 1918 int card_number; 1919 int port_number; 1920 char handle[32]; 1921 int magic; /* Reserved */ 1922 int enabled; /* Reserved */ 1923 int caps; 1924 #define MIXER_CAP_VIRTUAL 0x00000001 1925 int flags; /* Reserved */ 1926 int nrext; 1927 /* 1928 * The priority field can be used to select the default (motherboard) 1929 * mixer device. The mixer with the highest priority is the 1930 * most preferred one. -2 or less means that this device cannot be used 1931 * as the default mixer. 1932 */ 1933 int priority; 1934 int filler[254]; /* Reserved */ 1935 } oss_mixerinfo; 1936 1937 typedef struct oss_midi_info 1938 { 1939 int dev; /* Midi device number */ 1940 char name[64]; 1941 int busy; /* 0, OPEN_READ, OPEN_WRITE or OPEN_READWRITE */ 1942 int pid; 1943 char cmd[64]; /* Command using the device (if known) */ 1944 int caps; 1945 #define MIDI_CAP_MPU401 0x00000001 /**** OBSOLETE ****/ 1946 #define MIDI_CAP_INPUT 0x00000002 1947 #define MIDI_CAP_OUTPUT 0x00000004 1948 #define MIDI_CAP_INOUT (MIDI_CAP_INPUT|MIDI_CAP_OUTPUT) 1949 #define MIDI_CAP_VIRTUAL 0x00000008 /* Pseudo device */ 1950 #define MIDI_CAP_MTCINPUT 0x00000010 /* Supports SNDCTL_MIDI_MTCINPUT */ 1951 #define MIDI_CAP_CLIENT 0x00000020 /* Virtual client side device */ 1952 #define MIDI_CAP_SERVER 0x00000040 /* Virtual server side device */ 1953 #define MIDI_CAP_INTERNAL 0x00000080 /* Internal (synth) device */ 1954 #define MIDI_CAP_EXTERNAL 0x00000100 /* external (MIDI port) device */ 1955 #define MIDI_CAP_PTOP 0x00000200 /* Point to point link to one device */ 1956 #define MIDI_CAP_MTC 0x00000400 /* MTC/SMPTE (control) device */ 1957 int magic; /* Reserved for internal use */ 1958 int card_number; 1959 int port_number; 1960 int enabled; /* 1=enabled, 0=device not ready at this moment */ 1961 int flags; /* For internal use only - no practical meaning */ 1962 char handle[32]; 1963 oss_longname_t song_name; /* Song name (if known) */ 1964 oss_label_t label; /* Device label (if given) */ 1965 int latency; /* In usecs, -1=unknown */ 1966 int filler[244]; 1967 } oss_midi_info; 1968 1969 typedef struct oss_card_info 1970 { 1971 int card; 1972 char shortname[16]; 1973 char longname[128]; 1974 int flags; 1975 char hw_info[400]; 1976 int intr_count, ack_count; 1977 int filler[154]; 1978 } oss_card_info; 1979 1980 #define SNDCTL_SYSINFO _IOR ('X', 1, oss_sysinfo) 1981 #define OSS_SYSINFO SNDCTL_SYSINFO /* Old name */ 1982 1983 #define SNDCTL_MIX_NRMIX _IOR ('X', 2, int) 1984 #define SNDCTL_MIX_NREXT _IOWR('X', 3, int) 1985 #define SNDCTL_MIX_EXTINFO _IOWR('X', 4, oss_mixext) 1986 #define SNDCTL_MIX_READ _IOWR('X', 5, oss_mixer_value) 1987 #define SNDCTL_MIX_WRITE _IOWR('X', 6, oss_mixer_value) 1988 1989 #define SNDCTL_AUDIOINFO _IOWR('X', 7, oss_audioinfo) 1990 #define SNDCTL_MIX_ENUMINFO _IOWR('X', 8, oss_mixer_enuminfo) 1991 #define SNDCTL_MIDIINFO _IOWR('X', 9, oss_midi_info) 1992 #define SNDCTL_MIXERINFO _IOWR('X',10, oss_mixerinfo) 1993 #define SNDCTL_CARDINFO _IOWR('X',11, oss_card_info) 1994 #define SNDCTL_ENGINEINFO _IOWR('X',12, oss_audioinfo) 1995 #define SNDCTL_AUDIOINFO_EX _IOWR('X',13, oss_audioinfo) 1996 1997 /* 1998 * Few more "globally" available ioctl calls. 1999 */ 2000 #define SNDCTL_SETSONG _IOW ('Y', 2, oss_longname_t) 2001 #define SNDCTL_GETSONG _IOR ('Y', 2, oss_longname_t) 2002 #define SNDCTL_SETNAME _IOW ('Y', 3, oss_longname_t) 2003 #define SNDCTL_SETLABEL _IOW ('Y', 4, oss_label_t) 2004 #define SNDCTL_GETLABEL _IOR ('Y', 4, oss_label_t) 2005 2006 #endif /* !_SYS_SOUNDCARD_H_ */ 2007