1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1982, 1986, 1990, 1993 5 * The Regents of the University of California. 6 * Copyright (c) 2010-2011 Juniper Networks, Inc. 7 * All rights reserved. 8 * 9 * Portions of this software were developed by Robert N. M. Watson under 10 * contract to Juniper Networks, Inc. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93 37 * $FreeBSD$ 38 */ 39 40 #ifndef _NETINET_IN_PCB_H_ 41 #define _NETINET_IN_PCB_H_ 42 43 #include <sys/queue.h> 44 #include <sys/epoch.h> 45 #include <sys/_lock.h> 46 #include <sys/_mutex.h> 47 #include <sys/_rwlock.h> 48 #include <net/route.h> 49 50 #ifdef _KERNEL 51 #include <sys/lock.h> 52 #include <sys/proc.h> 53 #include <sys/rwlock.h> 54 #include <sys/smr.h> 55 #include <sys/sysctl.h> 56 #include <net/vnet.h> 57 #include <vm/uma.h> 58 #endif 59 #include <sys/ck.h> 60 61 /* 62 * struct inpcb is the common protocol control block structure used in most 63 * IP transport protocols. 64 * 65 * Pointers to local and foreign host table entries, local and foreign socket 66 * numbers, and pointers up (to a socket structure) and down (to a 67 * protocol-specific control block) are stored here. 68 */ 69 CK_LIST_HEAD(inpcbhead, inpcb); 70 CK_LIST_HEAD(inpcbporthead, inpcbport); 71 CK_LIST_HEAD(inpcblbgrouphead, inpcblbgroup); 72 typedef uint64_t inp_gen_t; 73 74 /* 75 * PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet. 76 * So, AF_INET6 null laddr is also used as AF_INET null laddr, by utilizing 77 * the following structure. This requires padding always be zeroed out, 78 * which is done right after inpcb allocation and stays through its lifetime. 79 */ 80 struct in_addr_4in6 { 81 u_int32_t ia46_pad32[3]; 82 struct in_addr ia46_addr4; 83 }; 84 85 union in_dependaddr { 86 struct in_addr_4in6 id46_addr; 87 struct in6_addr id6_addr; 88 }; 89 90 /* 91 * NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553. in_conninfo has 92 * some extra padding to accomplish this. 93 * NOTE 2: tcp_syncache.c uses first 5 32-bit words, which identify fport, 94 * lport, faddr to generate hash, so these fields shouldn't be moved. 95 */ 96 struct in_endpoints { 97 u_int16_t ie_fport; /* foreign port */ 98 u_int16_t ie_lport; /* local port */ 99 /* protocol dependent part, local and foreign addr */ 100 union in_dependaddr ie_dependfaddr; /* foreign host table entry */ 101 union in_dependaddr ie_dependladdr; /* local host table entry */ 102 #define ie_faddr ie_dependfaddr.id46_addr.ia46_addr4 103 #define ie_laddr ie_dependladdr.id46_addr.ia46_addr4 104 #define ie6_faddr ie_dependfaddr.id6_addr 105 #define ie6_laddr ie_dependladdr.id6_addr 106 u_int32_t ie6_zoneid; /* scope zone id */ 107 }; 108 109 /* 110 * XXX The defines for inc_* are hacks and should be changed to direct 111 * references. 112 */ 113 struct in_conninfo { 114 u_int8_t inc_flags; 115 u_int8_t inc_len; 116 u_int16_t inc_fibnum; /* XXX was pad, 16 bits is plenty */ 117 /* protocol dependent part */ 118 struct in_endpoints inc_ie; 119 }; 120 121 /* 122 * Flags for inc_flags. 123 */ 124 #define INC_ISIPV6 0x01 125 #define INC_IPV6MINMTU 0x02 126 127 #define inc_fport inc_ie.ie_fport 128 #define inc_lport inc_ie.ie_lport 129 #define inc_faddr inc_ie.ie_faddr 130 #define inc_laddr inc_ie.ie_laddr 131 #define inc6_faddr inc_ie.ie6_faddr 132 #define inc6_laddr inc_ie.ie6_laddr 133 #define inc6_zoneid inc_ie.ie6_zoneid 134 135 #if defined(_KERNEL) || defined(_WANT_INPCB) 136 /* 137 * struct inpcb captures the network layer state for TCP, UDP, and raw IPv4 and 138 * IPv6 sockets. In the case of TCP and UDP, further per-connection state is 139 * hung off of inp_ppcb most of the time. Almost all fields of struct inpcb 140 * are static after creation or protected by a per-inpcb rwlock, inp_lock. 141 * 142 * A inpcb database is indexed by addresses/ports hash as well as list of 143 * all pcbs that belong to a certain proto. Database lookups or list traversals 144 * are be performed inside SMR section. Once desired PCB is found its own 145 * lock is to be obtained and SMR section exited. 146 * 147 * Key: 148 * (b) - Protected by the hpts lock. 149 * (c) - Constant after initialization 150 * (e) - Protected by the SMR section 151 * (i) - Protected by the inpcb lock 152 * (p) - Protected by the pcbinfo lock for the inpcb 153 * (h) - Protected by the pcbhash lock for the inpcb 154 * (s) - Protected by another subsystem's locks 155 * (x) - Undefined locking 156 * 157 * Notes on the tcp_hpts: 158 * 159 * First Hpts lock order is 160 * 1) INP_WLOCK() 161 * 2) HPTS_LOCK() i.e. hpts->pmtx 162 * 163 * To insert a TCB on the hpts you *must* be holding the INP_WLOCK(). 164 * You may check the inp->inp_in_hpts flag without the hpts lock. 165 * The hpts is the only one that will clear this flag holding 166 * only the hpts lock. This means that in your tcp_output() 167 * routine when you test for the inp_in_hpts flag to be 1 168 * it may be transitioning to 0 (by the hpts). 169 * That's ok since that will just mean an extra call to tcp_output 170 * that most likely will find the call you executed 171 * (when the mis-match occurred) will have put the TCB back 172 * on the hpts and it will return. If your 173 * call did not add the inp back to the hpts then you will either 174 * over-send or the cwnd will block you from sending more. 175 * 176 * Note you should also be holding the INP_WLOCK() when you 177 * call the remove from the hpts as well. Though usually 178 * you are either doing this from a timer, where you need and have 179 * the INP_WLOCK() or from destroying your TCB where again 180 * you should already have the INP_WLOCK(). 181 * 182 * The inp_hpts_cpu, inp_hpts_cpu_set, inp_input_cpu and 183 * inp_input_cpu_set fields are controlled completely by 184 * the hpts. Do not ever set these. The inp_hpts_cpu_set 185 * and inp_input_cpu_set fields indicate if the hpts has 186 * setup the respective cpu field. It is advised if this 187 * field is 0, to enqueue the packet with the appropriate 188 * hpts_immediate() call. If the _set field is 1, then 189 * you may compare the inp_*_cpu field to the curcpu and 190 * may want to again insert onto the hpts if these fields 191 * are not equal (i.e. you are not on the expected CPU). 192 * 193 * A note on inp_hpts_calls and inp_input_calls, these 194 * flags are set when the hpts calls either the output 195 * or do_segment routines respectively. If the routine 196 * being called wants to use this, then it needs to 197 * clear the flag before returning. The hpts will not 198 * clear the flag. The flags can be used to tell if 199 * the hpts is the function calling the respective 200 * routine. 201 * 202 * A few other notes: 203 * 204 * When a read lock is held, stability of the field is guaranteed; to write 205 * to a field, a write lock must generally be held. 206 * 207 * netinet/netinet6-layer code should not assume that the inp_socket pointer 208 * is safe to dereference without inp_lock being held, there may be 209 * close(2)-related races. 210 * 211 * The inp_vflag field is overloaded, and would otherwise ideally be (c). 212 */ 213 struct icmp6_filter; 214 struct inpcbpolicy; 215 struct m_snd_tag; 216 struct inpcb { 217 /* Cache line #1 (amd64) */ 218 CK_LIST_ENTRY(inpcb) inp_hash; /* (w:h/r:e) hash list */ 219 struct rwlock inp_lock; 220 /* Cache line #2 (amd64) */ 221 #define inp_start_zero inp_hpts 222 #define inp_zero_size (sizeof(struct inpcb) - \ 223 offsetof(struct inpcb, inp_start_zero)) 224 TAILQ_ENTRY(inpcb) inp_hpts; /* pacing out queue next lock(b) */ 225 uint32_t inp_hpts_gencnt; /* XXXGL */ 226 uint32_t inp_hpts_request; /* Current hpts request, zero if 227 * fits in the pacing window (i&b). */ 228 /* 229 * Note the next fields are protected by a 230 * different lock (hpts-lock). This means that 231 * they must correspond in size to the smallest 232 * protectable bit field (uint8_t on x86, and 233 * other platfomrs potentially uint32_t?). Also 234 * since CPU switches can occur at different times the two 235 * fields can *not* be collapsed into a signal bit field. 236 */ 237 #if defined(__amd64__) || defined(__i386__) 238 uint8_t inp_in_hpts; /* on output hpts (lock b) */ 239 #else 240 uint32_t inp_in_hpts; /* on output hpts (lock b) */ 241 #endif 242 volatile uint16_t inp_hpts_cpu; /* Lock (i) */ 243 volatile uint16_t inp_irq_cpu; /* Set by LRO in behalf of or the driver */ 244 u_int inp_refcount; /* (i) refcount */ 245 int inp_flags; /* (i) generic IP/datagram flags */ 246 int inp_flags2; /* (i) generic IP/datagram flags #2*/ 247 uint8_t inp_hpts_cpu_set :1, /* on output hpts (i) */ 248 inp_hpts_calls :1, /* (i) from output hpts */ 249 inp_irq_cpu_set :1, /* (i) from LRO/Driver */ 250 inp_spare_bits2 : 3; 251 uint8_t inp_numa_domain; /* numa domain */ 252 void *inp_ppcb; /* (i) pointer to per-protocol pcb */ 253 struct socket *inp_socket; /* (i) back pointer to socket */ 254 int32_t inp_hptsslot; /* Hpts wheel slot this tcb is Lock(i&b) */ 255 uint32_t inp_hpts_drop_reas; /* reason we are dropping the PCB (lock i&b) */ 256 struct inpcbinfo *inp_pcbinfo; /* (c) PCB list info */ 257 struct ucred *inp_cred; /* (c) cache of socket cred */ 258 u_int32_t inp_flow; /* (i) IPv6 flow information */ 259 u_char inp_vflag; /* (i) IP version flag (v4/v6) */ 260 u_char inp_ip_ttl; /* (i) time to live proto */ 261 u_char inp_ip_p; /* (c) protocol proto */ 262 u_char inp_ip_minttl; /* (i) minimum TTL or drop */ 263 uint32_t inp_flowid; /* (x) flow id / queue id */ 264 struct m_snd_tag *inp_snd_tag; /* (i) send tag for outgoing mbufs */ 265 uint32_t inp_flowtype; /* (x) M_HASHTYPE value */ 266 uint32_t inp_rss_listen_bucket; /* (x) overridden RSS listen bucket */ 267 268 /* Local and foreign ports, local and foreign addr. */ 269 struct in_conninfo inp_inc; /* (i) list for PCB's local port */ 270 271 /* MAC and IPSEC policy information. */ 272 struct label *inp_label; /* (i) MAC label */ 273 struct inpcbpolicy *inp_sp; /* (s) for IPSEC */ 274 275 /* Protocol-dependent part; options. */ 276 struct { 277 u_char inp_ip_tos; /* (i) type of service proto */ 278 struct mbuf *inp_options; /* (i) IP options */ 279 struct ip_moptions *inp_moptions; /* (i) mcast options */ 280 }; 281 struct { 282 /* (i) IP options */ 283 struct mbuf *in6p_options; 284 /* (i) IP6 options for outgoing packets */ 285 struct ip6_pktopts *in6p_outputopts; 286 /* (i) IP multicast options */ 287 struct ip6_moptions *in6p_moptions; 288 /* (i) ICMPv6 code type filter */ 289 struct icmp6_filter *in6p_icmp6filt; 290 /* (i) IPV6_CHECKSUM setsockopt */ 291 int in6p_cksum; 292 short in6p_hops; 293 }; 294 CK_LIST_ENTRY(inpcb) inp_portlist; /* (r:e/w:h) port list */ 295 struct inpcbport *inp_phd; /* (r:e/w:h) head of this list */ 296 inp_gen_t inp_gencnt; /* (c) generation count */ 297 void *spare_ptr; /* Spare pointer. */ 298 rt_gen_t inp_rt_cookie; /* generation for route entry */ 299 union { /* cached L3 information */ 300 struct route inp_route; 301 struct route_in6 inp_route6; 302 }; 303 CK_LIST_ENTRY(inpcb) inp_list; /* (r:e/w:p) all PCBs for proto */ 304 }; 305 #endif /* _KERNEL */ 306 307 #define inp_fport inp_inc.inc_fport 308 #define inp_lport inp_inc.inc_lport 309 #define inp_faddr inp_inc.inc_faddr 310 #define inp_laddr inp_inc.inc_laddr 311 312 #define in6p_faddr inp_inc.inc6_faddr 313 #define in6p_laddr inp_inc.inc6_laddr 314 #define in6p_zoneid inp_inc.inc6_zoneid 315 316 #define inp_vnet inp_pcbinfo->ipi_vnet 317 318 /* 319 * The range of the generation count, as used in this implementation, is 9e19. 320 * We would have to create 300 billion connections per second for this number 321 * to roll over in a year. This seems sufficiently unlikely that we simply 322 * don't concern ourselves with that possibility. 323 */ 324 325 /* 326 * Interface exported to userland by various protocols which use inpcbs. Hack 327 * alert -- only define if struct xsocket is in scope. 328 * Fields prefixed with "xi_" are unique to this structure, and the rest 329 * match fields in the struct inpcb, to ease coding and porting. 330 * 331 * Legend: 332 * (s) - used by userland utilities in src 333 * (p) - used by utilities in ports 334 * (3) - is known to be used by third party software not in ports 335 * (n) - no known usage 336 */ 337 #ifdef _SYS_SOCKETVAR_H_ 338 struct xinpcb { 339 ksize_t xi_len; /* length of this structure */ 340 struct xsocket xi_socket; /* (s,p) */ 341 struct in_conninfo inp_inc; /* (s,p) */ 342 uint64_t inp_gencnt; /* (s,p) */ 343 kvaddr_t inp_ppcb; /* (s) netstat(1) */ 344 int64_t inp_spare64[4]; 345 uint32_t inp_flow; /* (s) */ 346 uint32_t inp_flowid; /* (s) */ 347 uint32_t inp_flowtype; /* (s) */ 348 int32_t inp_flags; /* (s,p) */ 349 int32_t inp_flags2; /* (s) */ 350 int32_t inp_rss_listen_bucket; /* (n) */ 351 int32_t in6p_cksum; /* (n) */ 352 int32_t inp_spare32[4]; 353 uint16_t in6p_hops; /* (n) */ 354 uint8_t inp_ip_tos; /* (n) */ 355 int8_t pad8; 356 uint8_t inp_vflag; /* (s,p) */ 357 uint8_t inp_ip_ttl; /* (n) */ 358 uint8_t inp_ip_p; /* (n) */ 359 uint8_t inp_ip_minttl; /* (n) */ 360 int8_t inp_spare8[4]; 361 } __aligned(8); 362 363 struct xinpgen { 364 ksize_t xig_len; /* length of this structure */ 365 u_int xig_count; /* number of PCBs at this time */ 366 uint32_t _xig_spare32; 367 inp_gen_t xig_gen; /* generation count at this time */ 368 so_gen_t xig_sogen; /* socket generation count this time */ 369 uint64_t _xig_spare64[4]; 370 } __aligned(8); 371 372 struct sockopt_parameters { 373 struct in_conninfo sop_inc; 374 uint64_t sop_id; 375 int sop_level; 376 int sop_optname; 377 char sop_optval[]; 378 }; 379 380 #ifdef _KERNEL 381 int sysctl_setsockopt(SYSCTL_HANDLER_ARGS, struct inpcbinfo *pcbinfo, 382 int (*ctloutput_set)(struct inpcb *, struct sockopt *)); 383 void in_pcbtoxinpcb(const struct inpcb *, struct xinpcb *); 384 #endif 385 #endif /* _SYS_SOCKETVAR_H_ */ 386 387 #ifdef _KERNEL 388 /* 389 * Per-VNET pcb database for each high-level protocol (UDP, TCP, ...) in both 390 * IPv4 and IPv6. 391 * 392 * The pcbs are protected with SMR section and thus all lists in inpcbinfo 393 * are CK-lists. Locking is required to insert a pcb into database. Two 394 * locks are provided: one for the hash and one for the global list of pcbs, 395 * as well as overall count and generation count. 396 * 397 * Locking key: 398 * 399 * (c) Constant or nearly constant after initialisation 400 * (e) Protected by SMR section 401 * (g) Locked by ipi_lock 402 * (h) Locked by ipi_hash_lock 403 */ 404 struct inpcbinfo { 405 /* 406 * Global lock protecting inpcb list modification 407 */ 408 struct mtx ipi_lock; 409 struct inpcbhead ipi_listhead; /* (r:e/w:g) */ 410 u_int ipi_count; /* (g) */ 411 412 /* 413 * Generation count -- incremented each time a connection is allocated 414 * or freed. 415 */ 416 u_quad_t ipi_gencnt; /* (g) */ 417 418 /* 419 * Fields associated with port lookup and allocation. 420 */ 421 u_short ipi_lastport; /* (h) */ 422 u_short ipi_lastlow; /* (h) */ 423 u_short ipi_lasthi; /* (h) */ 424 425 /* 426 * UMA zone from which inpcbs are allocated for this protocol. 427 */ 428 uma_zone_t ipi_zone; /* (c) */ 429 uma_zone_t ipi_portzone; /* (c) */ 430 smr_t ipi_smr; /* (c) */ 431 432 /* 433 * Global hash of inpcbs, hashed by local and foreign addresses and 434 * port numbers. 435 */ 436 struct mtx ipi_hash_lock; 437 struct inpcbhead *ipi_hashbase; /* (r:e/w:h) */ 438 u_long ipi_hashmask; /* (c) */ 439 440 /* 441 * Global hash of inpcbs, hashed by only local port number. 442 */ 443 struct inpcbporthead *ipi_porthashbase; /* (h) */ 444 u_long ipi_porthashmask; /* (h) */ 445 446 /* 447 * Load balance groups used for the SO_REUSEPORT_LB option, 448 * hashed by local port. 449 */ 450 struct inpcblbgrouphead *ipi_lbgrouphashbase; /* (r:e/w:h) */ 451 u_long ipi_lbgrouphashmask; /* (h) */ 452 453 /* 454 * Pointer to network stack instance 455 */ 456 struct vnet *ipi_vnet; /* (c) */ 457 }; 458 459 /* 460 * Global allocation storage for each high-level protocol (UDP, TCP, ...). 461 * Each corresponding per-VNET inpcbinfo points into this one. 462 */ 463 struct inpcbstorage { 464 uma_zone_t ips_zone; 465 uma_zone_t ips_portzone; 466 uma_init ips_pcbinit; 467 size_t ips_size; 468 const char * ips_zone_name; 469 const char * ips_portzone_name; 470 const char * ips_infolock_name; 471 const char * ips_hashlock_name; 472 }; 473 474 #define INPCBSTORAGE_DEFINE(prot, ppcb, lname, zname, iname, hname) \ 475 static int \ 476 prot##_inpcb_init(void *mem, int size __unused, int flags __unused) \ 477 { \ 478 struct inpcb *inp = mem; \ 479 \ 480 rw_init_flags(&inp->inp_lock, lname, RW_RECURSE | RW_DUPOK); \ 481 return (0); \ 482 } \ 483 static struct inpcbstorage prot = { \ 484 .ips_size = sizeof(struct ppcb), \ 485 .ips_pcbinit = prot##_inpcb_init, \ 486 .ips_zone_name = zname, \ 487 .ips_portzone_name = zname " ports", \ 488 .ips_infolock_name = iname, \ 489 .ips_hashlock_name = hname, \ 490 }; \ 491 SYSINIT(prot##_inpcbstorage_init, SI_SUB_PROTO_DOMAIN, \ 492 SI_ORDER_SECOND, in_pcbstorage_init, &prot); \ 493 SYSUNINIT(prot##_inpcbstorage_uninit, SI_SUB_PROTO_DOMAIN, \ 494 SI_ORDER_SECOND, in_pcbstorage_destroy, &prot) 495 496 /* 497 * Load balance groups used for the SO_REUSEPORT_LB socket option. Each group 498 * (or unique address:port combination) can be re-used at most 499 * INPCBLBGROUP_SIZMAX (256) times. The inpcbs are stored in il_inp which 500 * is dynamically resized as processes bind/unbind to that specific group. 501 */ 502 struct inpcblbgroup { 503 CK_LIST_ENTRY(inpcblbgroup) il_list; 504 struct epoch_context il_epoch_ctx; 505 struct ucred *il_cred; 506 uint16_t il_lport; /* (c) */ 507 u_char il_vflag; /* (c) */ 508 uint8_t il_numa_domain; 509 uint32_t il_pad2; 510 union in_dependaddr il_dependladdr; /* (c) */ 511 #define il_laddr il_dependladdr.id46_addr.ia46_addr4 512 #define il6_laddr il_dependladdr.id6_addr 513 uint32_t il_inpsiz; /* max count in il_inp[] (h) */ 514 uint32_t il_inpcnt; /* cur count in il_inp[] (h) */ 515 struct inpcb *il_inp[]; /* (h) */ 516 }; 517 518 #define INP_LOCK_DESTROY(inp) rw_destroy(&(inp)->inp_lock) 519 #define INP_RLOCK(inp) rw_rlock(&(inp)->inp_lock) 520 #define INP_WLOCK(inp) rw_wlock(&(inp)->inp_lock) 521 #define INP_TRY_RLOCK(inp) rw_try_rlock(&(inp)->inp_lock) 522 #define INP_TRY_WLOCK(inp) rw_try_wlock(&(inp)->inp_lock) 523 #define INP_RUNLOCK(inp) rw_runlock(&(inp)->inp_lock) 524 #define INP_WUNLOCK(inp) rw_wunlock(&(inp)->inp_lock) 525 #define INP_UNLOCK(inp) rw_unlock(&(inp)->inp_lock) 526 #define INP_TRY_UPGRADE(inp) rw_try_upgrade(&(inp)->inp_lock) 527 #define INP_DOWNGRADE(inp) rw_downgrade(&(inp)->inp_lock) 528 #define INP_WLOCKED(inp) rw_wowned(&(inp)->inp_lock) 529 #define INP_LOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_LOCKED) 530 #define INP_RLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_RLOCKED) 531 #define INP_WLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_WLOCKED) 532 #define INP_UNLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_UNLOCKED) 533 534 /* 535 * These locking functions are for inpcb consumers outside of sys/netinet, 536 * more specifically, they were added for the benefit of TOE drivers. The 537 * macros are reserved for use by the stack. 538 */ 539 void inp_wlock(struct inpcb *); 540 void inp_wunlock(struct inpcb *); 541 void inp_rlock(struct inpcb *); 542 void inp_runlock(struct inpcb *); 543 544 #ifdef INVARIANT_SUPPORT 545 void inp_lock_assert(struct inpcb *); 546 void inp_unlock_assert(struct inpcb *); 547 #else 548 #define inp_lock_assert(inp) do {} while (0) 549 #define inp_unlock_assert(inp) do {} while (0) 550 #endif 551 552 void inp_apply_all(struct inpcbinfo *, void (*func)(struct inpcb *, void *), 553 void *arg); 554 int inp_ip_tos_get(const struct inpcb *inp); 555 void inp_ip_tos_set(struct inpcb *inp, int val); 556 struct socket * 557 inp_inpcbtosocket(struct inpcb *inp); 558 struct tcpcb * 559 inp_inpcbtotcpcb(struct inpcb *inp); 560 void inp_4tuple_get(struct inpcb *inp, uint32_t *laddr, uint16_t *lp, 561 uint32_t *faddr, uint16_t *fp); 562 int inp_so_options(const struct inpcb *inp); 563 564 #endif /* _KERNEL */ 565 566 #define INP_INFO_WLOCK(ipi) mtx_lock(&(ipi)->ipi_lock) 567 #define INP_INFO_WLOCKED(ipi) mtx_owned(&(ipi)->ipi_lock) 568 #define INP_INFO_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_lock) 569 #define INP_INFO_LOCK_ASSERT(ipi) MPASS(SMR_ENTERED((ipi)->ipi_smr) || \ 570 mtx_owned(&(ipi)->ipi_lock)) 571 #define INP_INFO_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_lock, MA_OWNED) 572 #define INP_INFO_WUNLOCK_ASSERT(ipi) \ 573 mtx_assert(&(ipi)->ipi_lock, MA_NOTOWNED) 574 575 #define INP_HASH_WLOCK(ipi) mtx_lock(&(ipi)->ipi_hash_lock) 576 #define INP_HASH_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_hash_lock) 577 #define INP_HASH_LOCK_ASSERT(ipi) MPASS(SMR_ENTERED((ipi)->ipi_smr) || \ 578 mtx_owned(&(ipi)->ipi_hash_lock)) 579 #define INP_HASH_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_hash_lock, \ 580 MA_OWNED) 581 582 /* 583 * Wildcard matching hash is not just a microoptimisation! The hash for 584 * wildcard IPv4 and wildcard IPv6 must be the same, otherwise AF_INET6 585 * wildcard bound pcb won't be able to receive AF_INET connections, while: 586 * jenkins_hash(&zeroes, 1, s) != jenkins_hash(&zeroes, 4, s) 587 * See also comment above struct in_addr_4in6. 588 */ 589 #define IN_ADDR_JHASH32(addr) \ 590 ((addr)->s_addr == INADDR_ANY ? V_in_pcbhashseed : \ 591 jenkins_hash32((&(addr)->s_addr), 1, V_in_pcbhashseed)) 592 #define IN6_ADDR_JHASH32(addr) \ 593 (memcmp((addr), &in6addr_any, sizeof(in6addr_any)) == 0 ? \ 594 V_in_pcbhashseed : \ 595 jenkins_hash32((addr)->__u6_addr.__u6_addr32, \ 596 nitems((addr)->__u6_addr.__u6_addr32), V_in_pcbhashseed)) 597 598 #define INP_PCBHASH(faddr, lport, fport, mask) \ 599 ((IN_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) & (mask)) 600 #define INP6_PCBHASH(faddr, lport, fport, mask) \ 601 ((IN6_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) & (mask)) 602 603 #define INP_PCBHASH_WILD(lport, mask) \ 604 ((V_in_pcbhashseed ^ ntohs(lport)) & (mask)) 605 606 #define INP_PCBLBGROUP_PKTHASH(faddr, lport, fport) \ 607 (IN_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) 608 #define INP6_PCBLBGROUP_PKTHASH(faddr, lport, fport) \ 609 (IN6_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) 610 611 #define INP_PCBPORTHASH(lport, mask) (ntohs((lport)) & (mask)) 612 613 /* 614 * Flags for inp_vflags -- historically version flags only 615 */ 616 #define INP_IPV4 0x1 617 #define INP_IPV6 0x2 618 #define INP_IPV6PROTO 0x4 /* opened under IPv6 protocol */ 619 620 /* 621 * Flags for inp_flags. 622 */ 623 #define INP_RECVOPTS 0x00000001 /* receive incoming IP options */ 624 #define INP_RECVRETOPTS 0x00000002 /* receive IP options for reply */ 625 #define INP_RECVDSTADDR 0x00000004 /* receive IP dst address */ 626 #define INP_HDRINCL 0x00000008 /* user supplies entire IP header */ 627 #define INP_HIGHPORT 0x00000010 /* user wants "high" port binding */ 628 #define INP_LOWPORT 0x00000020 /* user wants "low" port binding */ 629 #define INP_ANONPORT 0x00000040 /* port chosen for user */ 630 #define INP_RECVIF 0x00000080 /* receive incoming interface */ 631 #define INP_MTUDISC 0x00000100 /* user can do MTU discovery */ 632 /* INP_FREED 0x00000200 private to in_pcb.c */ 633 #define INP_RECVTTL 0x00000400 /* receive incoming IP TTL */ 634 #define INP_DONTFRAG 0x00000800 /* don't fragment packet */ 635 #define INP_BINDANY 0x00001000 /* allow bind to any address */ 636 #define INP_INHASHLIST 0x00002000 /* in_pcbinshash() has been called */ 637 #define INP_RECVTOS 0x00004000 /* receive incoming IP TOS */ 638 #define IN6P_IPV6_V6ONLY 0x00008000 /* restrict AF_INET6 socket for v6 */ 639 #define IN6P_PKTINFO 0x00010000 /* receive IP6 dst and I/F */ 640 #define IN6P_HOPLIMIT 0x00020000 /* receive hoplimit */ 641 #define IN6P_HOPOPTS 0x00040000 /* receive hop-by-hop options */ 642 #define IN6P_DSTOPTS 0x00080000 /* receive dst options after rthdr */ 643 #define IN6P_RTHDR 0x00100000 /* receive routing header */ 644 #define IN6P_RTHDRDSTOPTS 0x00200000 /* receive dstoptions before rthdr */ 645 #define IN6P_TCLASS 0x00400000 /* receive traffic class value */ 646 #define IN6P_AUTOFLOWLABEL 0x00800000 /* attach flowlabel automatically */ 647 /* was INP_TIMEWAIT 0x01000000 */ 648 #define INP_ONESBCAST 0x02000000 /* send all-ones broadcast */ 649 #define INP_DROPPED 0x04000000 /* protocol drop flag */ 650 #define INP_SOCKREF 0x08000000 /* strong socket reference */ 651 #define INP_RESERVED_0 0x10000000 /* reserved field */ 652 #define INP_RESERVED_1 0x20000000 /* reserved field */ 653 #define IN6P_RFC2292 0x40000000 /* used RFC2292 API on the socket */ 654 #define IN6P_MTU 0x80000000 /* receive path MTU */ 655 656 #define INP_CONTROLOPTS (INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\ 657 INP_RECVIF|INP_RECVTTL|INP_RECVTOS|\ 658 IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\ 659 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\ 660 IN6P_TCLASS|IN6P_AUTOFLOWLABEL|IN6P_RFC2292|\ 661 IN6P_MTU) 662 663 /* 664 * Flags for inp_flags2. 665 */ 666 #define INP_MBUF_L_ACKS 0x00000001 /* We need large mbufs for ack compression */ 667 #define INP_MBUF_ACKCMP 0x00000002 /* TCP mbuf ack compression ok */ 668 /* 0x00000004 */ 669 #define INP_REUSEPORT 0x00000008 /* SO_REUSEPORT option is set */ 670 /* 0x00000010 */ 671 #define INP_REUSEADDR 0x00000020 /* SO_REUSEADDR option is set */ 672 #define INP_BINDMULTI 0x00000040 /* IP_BINDMULTI option is set */ 673 #define INP_RSS_BUCKET_SET 0x00000080 /* IP_RSS_LISTEN_BUCKET is set */ 674 #define INP_RECVFLOWID 0x00000100 /* populate recv datagram with flow info */ 675 #define INP_RECVRSSBUCKETID 0x00000200 /* populate recv datagram with bucket id */ 676 #define INP_RATE_LIMIT_CHANGED 0x00000400 /* rate limit needs attention */ 677 #define INP_ORIGDSTADDR 0x00000800 /* receive IP dst address/port */ 678 #define INP_CANNOT_DO_ECN 0x00001000 /* The stack does not do ECN */ 679 #define INP_REUSEPORT_LB 0x00002000 /* SO_REUSEPORT_LB option is set */ 680 #define INP_SUPPORTS_MBUFQ 0x00004000 /* Supports the mbuf queue method of LRO */ 681 #define INP_MBUF_QUEUE_READY 0x00008000 /* The transport is pacing, inputs can be queued */ 682 #define INP_DONT_SACK_QUEUE 0x00010000 /* If a sack arrives do not wake me */ 683 #define INP_2PCP_SET 0x00020000 /* If the Eth PCP should be set explicitly */ 684 #define INP_2PCP_BIT0 0x00040000 /* Eth PCP Bit 0 */ 685 #define INP_2PCP_BIT1 0x00080000 /* Eth PCP Bit 1 */ 686 #define INP_2PCP_BIT2 0x00100000 /* Eth PCP Bit 2 */ 687 #define INP_2PCP_BASE INP_2PCP_BIT0 688 #define INP_2PCP_MASK (INP_2PCP_BIT0 | INP_2PCP_BIT1 | INP_2PCP_BIT2) 689 #define INP_2PCP_SHIFT 18 /* shift PCP field in/out of inp_flags2 */ 690 691 /* 692 * Flags passed to in_pcblookup*(), inp_smr_lock() and inp_next(). 693 */ 694 typedef enum { 695 INPLOOKUP_WILDCARD = 0x00000001, /* Allow wildcard sockets. */ 696 INPLOOKUP_RLOCKPCB = 0x00000002, /* Return inpcb read-locked. */ 697 INPLOOKUP_WLOCKPCB = 0x00000004, /* Return inpcb write-locked. */ 698 } inp_lookup_t; 699 700 #define INPLOOKUP_MASK (INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB | \ 701 INPLOOKUP_WLOCKPCB) 702 #define INPLOOKUP_LOCKMASK (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB) 703 704 #define sotoinpcb(so) ((struct inpcb *)(so)->so_pcb) 705 706 #define INP_SOCKAF(so) so->so_proto->pr_domain->dom_family 707 708 #define INP_CHECK_SOCKAF(so, af) (INP_SOCKAF(so) == af) 709 710 #ifdef _KERNEL 711 VNET_DECLARE(int, ipport_reservedhigh); 712 VNET_DECLARE(int, ipport_reservedlow); 713 VNET_DECLARE(int, ipport_lowfirstauto); 714 VNET_DECLARE(int, ipport_lowlastauto); 715 VNET_DECLARE(int, ipport_firstauto); 716 VNET_DECLARE(int, ipport_lastauto); 717 VNET_DECLARE(int, ipport_hifirstauto); 718 VNET_DECLARE(int, ipport_hilastauto); 719 VNET_DECLARE(int, ipport_randomized); 720 721 #define V_ipport_reservedhigh VNET(ipport_reservedhigh) 722 #define V_ipport_reservedlow VNET(ipport_reservedlow) 723 #define V_ipport_lowfirstauto VNET(ipport_lowfirstauto) 724 #define V_ipport_lowlastauto VNET(ipport_lowlastauto) 725 #define V_ipport_firstauto VNET(ipport_firstauto) 726 #define V_ipport_lastauto VNET(ipport_lastauto) 727 #define V_ipport_hifirstauto VNET(ipport_hifirstauto) 728 #define V_ipport_hilastauto VNET(ipport_hilastauto) 729 #define V_ipport_randomized VNET(ipport_randomized) 730 731 void in_pcbinfo_init(struct inpcbinfo *, struct inpcbstorage *, 732 u_int, u_int); 733 void in_pcbinfo_destroy(struct inpcbinfo *); 734 void in_pcbstorage_init(void *); 735 void in_pcbstorage_destroy(void *); 736 737 int in_pcbbind_check_bindmulti(const struct inpcb *ni, 738 const struct inpcb *oi); 739 740 void in_pcbpurgeif0(struct inpcbinfo *, struct ifnet *); 741 int in_pcballoc(struct socket *, struct inpcbinfo *); 742 int in_pcbbind(struct inpcb *, struct sockaddr *, struct ucred *); 743 int in_pcbbind_setup(struct inpcb *, struct sockaddr *, in_addr_t *, 744 u_short *, struct ucred *); 745 int in_pcbconnect(struct inpcb *, struct sockaddr *, struct ucred *, bool); 746 int in_pcbconnect_setup(struct inpcb *, struct sockaddr *, in_addr_t *, 747 u_short *, in_addr_t *, u_short *, struct inpcb **, 748 struct ucred *); 749 void in_pcbdetach(struct inpcb *); 750 void in_pcbdisconnect(struct inpcb *); 751 void in_pcbdrop(struct inpcb *); 752 void in_pcbfree(struct inpcb *); 753 int in_pcbinshash(struct inpcb *); 754 int in_pcbladdr(struct inpcb *, struct in_addr *, struct in_addr *, 755 struct ucred *); 756 int in_pcblbgroup_numa(struct inpcb *, int arg); 757 struct inpcb * 758 in_pcblookup(struct inpcbinfo *, struct in_addr, u_int, 759 struct in_addr, u_int, int, struct ifnet *); 760 struct inpcb * 761 in_pcblookup_mbuf(struct inpcbinfo *, struct in_addr, u_int, 762 struct in_addr, u_int, int, struct ifnet *, struct mbuf *); 763 void in_pcbnotifyall(struct inpcbinfo *pcbinfo, struct in_addr, 764 int, struct inpcb *(*)(struct inpcb *, int)); 765 void in_pcbref(struct inpcb *); 766 void in_pcbrehash(struct inpcb *); 767 bool in_pcbrele_rlocked(struct inpcb *); 768 bool in_pcbrele_wlocked(struct inpcb *); 769 770 typedef bool inp_match_t(const struct inpcb *, void *); 771 struct inpcb_iterator { 772 const struct inpcbinfo *ipi; 773 struct inpcb *inp; 774 inp_match_t *match; 775 void *ctx; 776 int hash; 777 #define INP_ALL_LIST -1 778 const inp_lookup_t lock; 779 }; 780 781 /* Note: sparse initializers guarantee .inp = NULL. */ 782 #define INP_ITERATOR(_ipi, _lock, _match, _ctx) \ 783 { \ 784 .ipi = (_ipi), \ 785 .lock = (_lock), \ 786 .hash = INP_ALL_LIST, \ 787 .match = (_match), \ 788 .ctx = (_ctx), \ 789 } 790 #define INP_ALL_ITERATOR(_ipi, _lock) \ 791 { \ 792 .ipi = (_ipi), \ 793 .lock = (_lock), \ 794 .hash = INP_ALL_LIST, \ 795 } 796 797 struct inpcb *inp_next(struct inpcb_iterator *); 798 void in_losing(struct inpcb *); 799 void in_pcbsetsolabel(struct socket *so); 800 int in_getpeeraddr(struct socket *so, struct sockaddr **nam); 801 int in_getsockaddr(struct socket *so, struct sockaddr **nam); 802 struct sockaddr * 803 in_sockaddr(in_port_t port, struct in_addr *addr); 804 void in_pcbsosetlabel(struct socket *so); 805 #ifdef RATELIMIT 806 int 807 in_pcboutput_txrtlmt_locked(struct inpcb *, struct ifnet *, 808 struct mbuf *, uint32_t); 809 int in_pcbattach_txrtlmt(struct inpcb *, struct ifnet *, uint32_t, uint32_t, 810 uint32_t, struct m_snd_tag **); 811 void in_pcbdetach_txrtlmt(struct inpcb *); 812 void in_pcbdetach_tag(struct m_snd_tag *); 813 int in_pcbmodify_txrtlmt(struct inpcb *, uint32_t); 814 int in_pcbquery_txrtlmt(struct inpcb *, uint32_t *); 815 int in_pcbquery_txrlevel(struct inpcb *, uint32_t *); 816 void in_pcboutput_txrtlmt(struct inpcb *, struct ifnet *, struct mbuf *); 817 void in_pcboutput_eagain(struct inpcb *); 818 #endif 819 #endif /* _KERNEL */ 820 821 #endif /* !_NETINET_IN_PCB_H_ */ 822