1 #include <sys/cdefs.h> 2 __FBSDID("$FreeBSD$"); 3 4 /*- 5 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 6 * 7 * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>, 8 * Nick Hibma <n_hibma@FreeBSD.org> 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $ 34 */ 35 36 /* Also already merged from NetBSD: 37 * $NetBSD: umass.c,v 1.67 2001/11/25 19:05:22 augustss Exp $ 38 * $NetBSD: umass.c,v 1.90 2002/11/04 19:17:33 pooka Exp $ 39 * $NetBSD: umass.c,v 1.108 2003/11/07 17:03:25 wiz Exp $ 40 * $NetBSD: umass.c,v 1.109 2003/12/04 13:57:31 keihan Exp $ 41 */ 42 43 /* 44 * Universal Serial Bus Mass Storage Class specs: 45 * http://www.usb.org/developers/devclass_docs/usb_msc_overview_1.2.pdf 46 * http://www.usb.org/developers/devclass_docs/usbmassbulk_10.pdf 47 * http://www.usb.org/developers/devclass_docs/usb_msc_cbi_1.1.pdf 48 * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf 49 */ 50 51 /* 52 * Ported to NetBSD by Lennart Augustsson <augustss@NetBSD.org>. 53 * Parts of the code written by Jason R. Thorpe <thorpej@shagadelic.org>. 54 */ 55 56 /* 57 * The driver handles 3 Wire Protocols 58 * - Command/Bulk/Interrupt (CBI) 59 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 60 * - Mass Storage Bulk-Only (BBB) 61 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 62 * 63 * Over these wire protocols it handles the following command protocols 64 * - SCSI 65 * - UFI (floppy command set) 66 * - 8070i (ATAPI) 67 * 68 * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The 69 * sc->sc_transform method is used to convert the commands into the appropriate 70 * format (if at all necessary). For example, UFI requires all commands to be 71 * 12 bytes in length amongst other things. 72 * 73 * The source code below is marked and can be split into a number of pieces 74 * (in this order): 75 * 76 * - probe/attach/detach 77 * - generic transfer routines 78 * - BBB 79 * - CBI 80 * - CBI_I (in addition to functions from CBI) 81 * - CAM (Common Access Method) 82 * - SCSI 83 * - UFI 84 * - 8070i (ATAPI) 85 * 86 * The protocols are implemented using a state machine, for the transfers as 87 * well as for the resets. The state machine is contained in umass_t_*_callback. 88 * The state machine is started through either umass_command_start() or 89 * umass_reset(). 90 * 91 * The reason for doing this is a) CAM performs a lot better this way and b) it 92 * avoids using tsleep from interrupt context (for example after a failed 93 * transfer). 94 */ 95 96 /* 97 * The SCSI related part of this driver has been derived from the 98 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@FreeBSD.org). 99 * 100 * The CAM layer uses so called actions which are messages sent to the host 101 * adapter for completion. The actions come in through umass_cam_action. The 102 * appropriate block of routines is called depending on the transport protocol 103 * in use. When the transfer has finished, these routines call 104 * umass_cam_cb again to complete the CAM command. 105 */ 106 107 #include <sys/stdint.h> 108 #include <sys/stddef.h> 109 #include <sys/param.h> 110 #include <sys/queue.h> 111 #include <sys/types.h> 112 #include <sys/systm.h> 113 #include <sys/kernel.h> 114 #include <sys/bus.h> 115 #include <sys/module.h> 116 #include <sys/lock.h> 117 #include <sys/mutex.h> 118 #include <sys/condvar.h> 119 #include <sys/sysctl.h> 120 #include <sys/sx.h> 121 #include <sys/unistd.h> 122 #include <sys/callout.h> 123 #include <sys/malloc.h> 124 #include <sys/priv.h> 125 126 #include <dev/usb/usb.h> 127 #include <dev/usb/usbdi.h> 128 #include <dev/usb/usbdi_util.h> 129 #include "usbdevs.h" 130 131 #include <dev/usb/quirk/usb_quirk.h> 132 133 #include <cam/cam.h> 134 #include <cam/cam_ccb.h> 135 #include <cam/cam_sim.h> 136 #include <cam/cam_xpt_sim.h> 137 #include <cam/scsi/scsi_all.h> 138 #include <cam/scsi/scsi_da.h> 139 140 #include <cam/cam_periph.h> 141 142 #ifdef USB_DEBUG 143 #define DIF(m, x) \ 144 do { \ 145 if (umass_debug & (m)) { x ; } \ 146 } while (0) 147 148 #define DPRINTF(sc, m, fmt, ...) \ 149 do { \ 150 if (umass_debug & (m)) { \ 151 printf("%s:%s: " fmt, \ 152 (sc) ? (const char *)(sc)->sc_name : \ 153 (const char *)"umassX", \ 154 __FUNCTION__ ,## __VA_ARGS__); \ 155 } \ 156 } while (0) 157 158 #define UDMASS_GEN 0x00010000 /* general */ 159 #define UDMASS_SCSI 0x00020000 /* scsi */ 160 #define UDMASS_UFI 0x00040000 /* ufi command set */ 161 #define UDMASS_ATAPI 0x00080000 /* 8070i command set */ 162 #define UDMASS_CMD (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI) 163 #define UDMASS_USB 0x00100000 /* USB general */ 164 #define UDMASS_BBB 0x00200000 /* Bulk-Only transfers */ 165 #define UDMASS_CBI 0x00400000 /* CBI transfers */ 166 #define UDMASS_WIRE (UDMASS_BBB|UDMASS_CBI) 167 #define UDMASS_ALL 0xffff0000 /* all of the above */ 168 static int umass_debug; 169 static int umass_throttle; 170 171 static SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 172 "USB umass"); 173 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RWTUN, 174 &umass_debug, 0, "umass debug level"); 175 SYSCTL_INT(_hw_usb_umass, OID_AUTO, throttle, CTLFLAG_RWTUN, 176 &umass_throttle, 0, "Forced delay between commands in milliseconds"); 177 #else 178 #define DIF(...) do { } while (0) 179 #define DPRINTF(...) do { } while (0) 180 #endif 181 182 #define UMASS_BULK_SIZE (1 << 17) 183 #define UMASS_CBI_DIAGNOSTIC_CMDLEN 12 /* bytes */ 184 #define UMASS_MAX_CMDLEN MAX(12, CAM_MAX_CDBLEN) /* bytes */ 185 186 /* USB transfer definitions */ 187 188 #define UMASS_T_BBB_RESET1 0 /* Bulk-Only */ 189 #define UMASS_T_BBB_RESET2 1 190 #define UMASS_T_BBB_RESET3 2 191 #define UMASS_T_BBB_COMMAND 3 192 #define UMASS_T_BBB_DATA_READ 4 193 #define UMASS_T_BBB_DATA_RD_CS 5 194 #define UMASS_T_BBB_DATA_WRITE 6 195 #define UMASS_T_BBB_DATA_WR_CS 7 196 #define UMASS_T_BBB_STATUS 8 197 #define UMASS_T_BBB_MAX 9 198 199 #define UMASS_T_CBI_RESET1 0 /* CBI */ 200 #define UMASS_T_CBI_RESET2 1 201 #define UMASS_T_CBI_RESET3 2 202 #define UMASS_T_CBI_COMMAND 3 203 #define UMASS_T_CBI_DATA_READ 4 204 #define UMASS_T_CBI_DATA_RD_CS 5 205 #define UMASS_T_CBI_DATA_WRITE 6 206 #define UMASS_T_CBI_DATA_WR_CS 7 207 #define UMASS_T_CBI_STATUS 8 208 #define UMASS_T_CBI_RESET4 9 209 #define UMASS_T_CBI_MAX 10 210 211 #define UMASS_T_MAX MAX(UMASS_T_CBI_MAX, UMASS_T_BBB_MAX) 212 213 /* Generic definitions */ 214 215 /* Direction for transfer */ 216 #define DIR_NONE 0 217 #define DIR_IN 1 218 #define DIR_OUT 2 219 220 /* device name */ 221 #define DEVNAME "umass" 222 #define DEVNAME_SIM "umass-sim" 223 224 /* Approximate maximum transfer speeds (assumes 33% overhead). */ 225 #define UMASS_FULL_TRANSFER_SPEED 1000 226 #define UMASS_HIGH_TRANSFER_SPEED 40000 227 #define UMASS_SUPER_TRANSFER_SPEED 400000 228 #define UMASS_FLOPPY_TRANSFER_SPEED 20 229 230 #define UMASS_TIMEOUT 5000 /* ms */ 231 232 /* CAM specific definitions */ 233 234 #define UMASS_SCSIID_MAX 1 /* maximum number of drives expected */ 235 #define UMASS_SCSIID_HOST UMASS_SCSIID_MAX 236 237 /* Bulk-Only features */ 238 239 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 240 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 241 242 /* Command Block Wrapper */ 243 typedef struct { 244 uDWord dCBWSignature; 245 #define CBWSIGNATURE 0x43425355 246 uDWord dCBWTag; 247 uDWord dCBWDataTransferLength; 248 uByte bCBWFlags; 249 #define CBWFLAGS_OUT 0x00 250 #define CBWFLAGS_IN 0x80 251 uByte bCBWLUN; 252 uByte bCDBLength; 253 #define CBWCDBLENGTH 16 254 uByte CBWCDB[CBWCDBLENGTH]; 255 } __packed umass_bbb_cbw_t; 256 257 #define UMASS_BBB_CBW_SIZE 31 258 259 /* Command Status Wrapper */ 260 typedef struct { 261 uDWord dCSWSignature; 262 #define CSWSIGNATURE 0x53425355 263 #define CSWSIGNATURE_IMAGINATION_DBX1 0x43425355 264 #define CSWSIGNATURE_OLYMPUS_C1 0x55425355 265 uDWord dCSWTag; 266 uDWord dCSWDataResidue; 267 uByte bCSWStatus; 268 #define CSWSTATUS_GOOD 0x0 269 #define CSWSTATUS_FAILED 0x1 270 #define CSWSTATUS_PHASE 0x2 271 } __packed umass_bbb_csw_t; 272 273 #define UMASS_BBB_CSW_SIZE 13 274 275 /* CBI features */ 276 277 #define UR_CBI_ADSC 0x00 278 279 typedef union { 280 struct { 281 uint8_t type; 282 #define IDB_TYPE_CCI 0x00 283 uint8_t value; 284 #define IDB_VALUE_PASS 0x00 285 #define IDB_VALUE_FAIL 0x01 286 #define IDB_VALUE_PHASE 0x02 287 #define IDB_VALUE_PERSISTENT 0x03 288 #define IDB_VALUE_STATUS_MASK 0x03 289 } __packed common; 290 291 struct { 292 uint8_t asc; 293 uint8_t ascq; 294 } __packed ufi; 295 } __packed umass_cbi_sbl_t; 296 297 struct umass_softc; /* see below */ 298 299 typedef void (umass_callback_t)(struct umass_softc *sc, union ccb *ccb, 300 uint32_t residue, uint8_t status); 301 302 #define STATUS_CMD_OK 0 /* everything ok */ 303 #define STATUS_CMD_UNKNOWN 1 /* will have to fetch sense */ 304 #define STATUS_CMD_FAILED 2 /* transfer was ok, command failed */ 305 #define STATUS_WIRE_FAILED 3 /* couldn't even get command across */ 306 307 typedef uint8_t (umass_transform_t)(struct umass_softc *sc, uint8_t *cmd_ptr, 308 uint8_t cmd_len); 309 310 /* Wire and command protocol */ 311 #define UMASS_PROTO_BBB 0x0001 /* USB wire protocol */ 312 #define UMASS_PROTO_CBI 0x0002 313 #define UMASS_PROTO_CBI_I 0x0004 314 #define UMASS_PROTO_WIRE 0x00ff /* USB wire protocol mask */ 315 #define UMASS_PROTO_SCSI 0x0100 /* command protocol */ 316 #define UMASS_PROTO_ATAPI 0x0200 317 #define UMASS_PROTO_UFI 0x0400 318 #define UMASS_PROTO_RBC 0x0800 319 #define UMASS_PROTO_COMMAND 0xff00 /* command protocol mask */ 320 321 /* Device specific quirks */ 322 #define NO_QUIRKS 0x0000 323 /* 324 * The drive does not support Test Unit Ready. Convert to Start Unit 325 */ 326 #define NO_TEST_UNIT_READY 0x0001 327 /* 328 * The drive does not reset the Unit Attention state after REQUEST 329 * SENSE has been sent. The INQUIRY command does not reset the UA 330 * either, and so CAM runs in circles trying to retrieve the initial 331 * INQUIRY data. 332 */ 333 #define RS_NO_CLEAR_UA 0x0002 334 /* The drive does not support START STOP. */ 335 #define NO_START_STOP 0x0004 336 /* Don't ask for full inquiry data (255b). */ 337 #define FORCE_SHORT_INQUIRY 0x0008 338 /* Needs to be initialised the Shuttle way */ 339 #define SHUTTLE_INIT 0x0010 340 /* Drive needs to be switched to alternate iface 1 */ 341 #define ALT_IFACE_1 0x0020 342 /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */ 343 #define FLOPPY_SPEED 0x0040 344 /* The device can't count and gets the residue of transfers wrong */ 345 #define IGNORE_RESIDUE 0x0080 346 /* No GetMaxLun call */ 347 #define NO_GETMAXLUN 0x0100 348 /* The device uses a weird CSWSIGNATURE. */ 349 #define WRONG_CSWSIG 0x0200 350 /* Device cannot handle INQUIRY so fake a generic response */ 351 #define NO_INQUIRY 0x0400 352 /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */ 353 #define NO_INQUIRY_EVPD 0x0800 354 /* Pad all RBC requests to 12 bytes. */ 355 #define RBC_PAD_TO_12 0x1000 356 /* 357 * Device reports number of sectors from READ_CAPACITY, not max 358 * sector number. 359 */ 360 #define READ_CAPACITY_OFFBY1 0x2000 361 /* 362 * Device cannot handle a SCSI synchronize cache command. Normally 363 * this quirk would be handled in the cam layer, but for IDE bridges 364 * we need to associate the quirk with the bridge and not the 365 * underlying disk device. This is handled by faking a success 366 * result. 367 */ 368 #define NO_SYNCHRONIZE_CACHE 0x4000 369 /* Device does not support 'PREVENT/ALLOW MEDIUM REMOVAL'. */ 370 #define NO_PREVENT_ALLOW 0x8000 371 372 struct umass_softc { 373 struct scsi_sense cam_scsi_sense; 374 struct scsi_test_unit_ready cam_scsi_test_unit_ready; 375 struct mtx sc_mtx; 376 struct { 377 uint8_t *data_ptr; 378 union ccb *ccb; 379 umass_callback_t *callback; 380 381 uint32_t data_len; /* bytes */ 382 uint32_t data_rem; /* bytes */ 383 uint32_t data_timeout; /* ms */ 384 uint32_t actlen; /* bytes */ 385 386 uint8_t cmd_data[UMASS_MAX_CMDLEN]; 387 uint8_t cmd_len; /* bytes */ 388 uint8_t dir; 389 uint8_t lun; 390 } sc_transfer; 391 392 /* Bulk specific variables for transfers in progress */ 393 umass_bbb_cbw_t cbw; /* command block wrapper */ 394 umass_bbb_csw_t csw; /* command status wrapper */ 395 396 /* CBI specific variables for transfers in progress */ 397 umass_cbi_sbl_t sbl; /* status block */ 398 399 device_t sc_dev; 400 struct usb_device *sc_udev; 401 struct cam_sim *sc_sim; /* SCSI Interface Module */ 402 struct usb_xfer *sc_xfer[UMASS_T_MAX]; 403 404 /* 405 * The command transform function is used to convert the SCSI 406 * commands into their derivatives, like UFI, ATAPI, and friends. 407 */ 408 umass_transform_t *sc_transform; 409 410 uint32_t sc_unit; 411 uint32_t sc_quirks; /* they got it almost right */ 412 uint32_t sc_proto; /* wire and cmd protocol */ 413 414 uint8_t sc_name[16]; 415 uint8_t sc_iface_no; /* interface number */ 416 uint8_t sc_maxlun; /* maximum LUN number, inclusive */ 417 uint8_t sc_last_xfer_index; 418 uint8_t sc_status_try; 419 }; 420 421 struct umass_probe_proto { 422 uint32_t quirks; 423 uint32_t proto; 424 425 int error; 426 }; 427 428 /* prototypes */ 429 430 static device_probe_t umass_probe; 431 static device_attach_t umass_attach; 432 static device_detach_t umass_detach; 433 434 static usb_callback_t umass_tr_error; 435 static usb_callback_t umass_t_bbb_reset1_callback; 436 static usb_callback_t umass_t_bbb_reset2_callback; 437 static usb_callback_t umass_t_bbb_reset3_callback; 438 static usb_callback_t umass_t_bbb_command_callback; 439 static usb_callback_t umass_t_bbb_data_read_callback; 440 static usb_callback_t umass_t_bbb_data_rd_cs_callback; 441 static usb_callback_t umass_t_bbb_data_write_callback; 442 static usb_callback_t umass_t_bbb_data_wr_cs_callback; 443 static usb_callback_t umass_t_bbb_status_callback; 444 static usb_callback_t umass_t_cbi_reset1_callback; 445 static usb_callback_t umass_t_cbi_reset2_callback; 446 static usb_callback_t umass_t_cbi_reset3_callback; 447 static usb_callback_t umass_t_cbi_reset4_callback; 448 static usb_callback_t umass_t_cbi_command_callback; 449 static usb_callback_t umass_t_cbi_data_read_callback; 450 static usb_callback_t umass_t_cbi_data_rd_cs_callback; 451 static usb_callback_t umass_t_cbi_data_write_callback; 452 static usb_callback_t umass_t_cbi_data_wr_cs_callback; 453 static usb_callback_t umass_t_cbi_status_callback; 454 455 static void umass_cancel_ccb(struct umass_softc *); 456 static void umass_init_shuttle(struct umass_softc *); 457 static void umass_reset(struct umass_softc *); 458 static void umass_t_bbb_data_clear_stall_callback(struct usb_xfer *, 459 uint8_t, uint8_t, usb_error_t); 460 static void umass_command_start(struct umass_softc *, uint8_t, void *, 461 uint32_t, uint32_t, umass_callback_t *, union ccb *); 462 static uint8_t umass_bbb_get_max_lun(struct umass_softc *); 463 static void umass_cbi_start_status(struct umass_softc *); 464 static void umass_t_cbi_data_clear_stall_callback(struct usb_xfer *, 465 uint8_t, uint8_t, usb_error_t); 466 static int umass_cam_attach_sim(struct umass_softc *); 467 static void umass_cam_attach(struct umass_softc *); 468 static void umass_cam_detach_sim(struct umass_softc *); 469 static void umass_cam_action(struct cam_sim *, union ccb *); 470 static void umass_cam_poll(struct cam_sim *); 471 static void umass_cam_cb(struct umass_softc *, union ccb *, uint32_t, 472 uint8_t); 473 static void umass_cam_sense_cb(struct umass_softc *, union ccb *, uint32_t, 474 uint8_t); 475 static void umass_cam_quirk_cb(struct umass_softc *, union ccb *, uint32_t, 476 uint8_t); 477 static uint8_t umass_scsi_transform(struct umass_softc *, uint8_t *, uint8_t); 478 static uint8_t umass_rbc_transform(struct umass_softc *, uint8_t *, uint8_t); 479 static uint8_t umass_ufi_transform(struct umass_softc *, uint8_t *, uint8_t); 480 static uint8_t umass_atapi_transform(struct umass_softc *, uint8_t *, 481 uint8_t); 482 static uint8_t umass_no_transform(struct umass_softc *, uint8_t *, uint8_t); 483 static uint8_t umass_std_transform(struct umass_softc *, union ccb *, uint8_t 484 *, uint8_t); 485 486 #ifdef USB_DEBUG 487 static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 488 static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 489 static void umass_cbi_dump_cmd(struct umass_softc *, void *, uint8_t); 490 static void umass_dump_buffer(struct umass_softc *, uint8_t *, uint32_t, 491 uint32_t); 492 #endif 493 494 static struct usb_config umass_bbb_config[UMASS_T_BBB_MAX] = { 495 [UMASS_T_BBB_RESET1] = { 496 .type = UE_CONTROL, 497 .endpoint = 0x00, /* Control pipe */ 498 .direction = UE_DIR_ANY, 499 .bufsize = sizeof(struct usb_device_request), 500 .callback = &umass_t_bbb_reset1_callback, 501 .timeout = 5000, /* 5 seconds */ 502 .interval = 500, /* 500 milliseconds */ 503 }, 504 505 [UMASS_T_BBB_RESET2] = { 506 .type = UE_CONTROL, 507 .endpoint = 0x00, /* Control pipe */ 508 .direction = UE_DIR_ANY, 509 .bufsize = sizeof(struct usb_device_request), 510 .callback = &umass_t_bbb_reset2_callback, 511 .timeout = 5000, /* 5 seconds */ 512 .interval = 50, /* 50 milliseconds */ 513 }, 514 515 [UMASS_T_BBB_RESET3] = { 516 .type = UE_CONTROL, 517 .endpoint = 0x00, /* Control pipe */ 518 .direction = UE_DIR_ANY, 519 .bufsize = sizeof(struct usb_device_request), 520 .callback = &umass_t_bbb_reset3_callback, 521 .timeout = 5000, /* 5 seconds */ 522 .interval = 50, /* 50 milliseconds */ 523 }, 524 525 [UMASS_T_BBB_COMMAND] = { 526 .type = UE_BULK, 527 .endpoint = UE_ADDR_ANY, 528 .direction = UE_DIR_OUT, 529 .bufsize = sizeof(umass_bbb_cbw_t), 530 .callback = &umass_t_bbb_command_callback, 531 .timeout = 5000, /* 5 seconds */ 532 }, 533 534 [UMASS_T_BBB_DATA_READ] = { 535 .type = UE_BULK, 536 .endpoint = UE_ADDR_ANY, 537 .direction = UE_DIR_IN, 538 .bufsize = UMASS_BULK_SIZE, 539 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 540 .callback = &umass_t_bbb_data_read_callback, 541 .timeout = 0, /* overwritten later */ 542 }, 543 544 [UMASS_T_BBB_DATA_RD_CS] = { 545 .type = UE_CONTROL, 546 .endpoint = 0x00, /* Control pipe */ 547 .direction = UE_DIR_ANY, 548 .bufsize = sizeof(struct usb_device_request), 549 .callback = &umass_t_bbb_data_rd_cs_callback, 550 .timeout = 5000, /* 5 seconds */ 551 }, 552 553 [UMASS_T_BBB_DATA_WRITE] = { 554 .type = UE_BULK, 555 .endpoint = UE_ADDR_ANY, 556 .direction = UE_DIR_OUT, 557 .bufsize = UMASS_BULK_SIZE, 558 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 559 .callback = &umass_t_bbb_data_write_callback, 560 .timeout = 0, /* overwritten later */ 561 }, 562 563 [UMASS_T_BBB_DATA_WR_CS] = { 564 .type = UE_CONTROL, 565 .endpoint = 0x00, /* Control pipe */ 566 .direction = UE_DIR_ANY, 567 .bufsize = sizeof(struct usb_device_request), 568 .callback = &umass_t_bbb_data_wr_cs_callback, 569 .timeout = 5000, /* 5 seconds */ 570 }, 571 572 [UMASS_T_BBB_STATUS] = { 573 .type = UE_BULK, 574 .endpoint = UE_ADDR_ANY, 575 .direction = UE_DIR_IN, 576 .bufsize = sizeof(umass_bbb_csw_t), 577 .flags = {.short_xfer_ok = 1,}, 578 .callback = &umass_t_bbb_status_callback, 579 .timeout = 5000, /* ms */ 580 }, 581 }; 582 583 static struct usb_config umass_cbi_config[UMASS_T_CBI_MAX] = { 584 [UMASS_T_CBI_RESET1] = { 585 .type = UE_CONTROL, 586 .endpoint = 0x00, /* Control pipe */ 587 .direction = UE_DIR_ANY, 588 .bufsize = (sizeof(struct usb_device_request) + 589 UMASS_CBI_DIAGNOSTIC_CMDLEN), 590 .callback = &umass_t_cbi_reset1_callback, 591 .timeout = 5000, /* 5 seconds */ 592 .interval = 500, /* 500 milliseconds */ 593 }, 594 595 [UMASS_T_CBI_RESET2] = { 596 .type = UE_CONTROL, 597 .endpoint = 0x00, /* Control pipe */ 598 .direction = UE_DIR_ANY, 599 .bufsize = sizeof(struct usb_device_request), 600 .callback = &umass_t_cbi_reset2_callback, 601 .timeout = 5000, /* 5 seconds */ 602 .interval = 50, /* 50 milliseconds */ 603 }, 604 605 [UMASS_T_CBI_RESET3] = { 606 .type = UE_CONTROL, 607 .endpoint = 0x00, /* Control pipe */ 608 .direction = UE_DIR_ANY, 609 .bufsize = sizeof(struct usb_device_request), 610 .callback = &umass_t_cbi_reset3_callback, 611 .timeout = 5000, /* 5 seconds */ 612 .interval = 50, /* 50 milliseconds */ 613 }, 614 615 [UMASS_T_CBI_COMMAND] = { 616 .type = UE_CONTROL, 617 .endpoint = 0x00, /* Control pipe */ 618 .direction = UE_DIR_ANY, 619 .bufsize = (sizeof(struct usb_device_request) + 620 UMASS_MAX_CMDLEN), 621 .callback = &umass_t_cbi_command_callback, 622 .timeout = 5000, /* 5 seconds */ 623 }, 624 625 [UMASS_T_CBI_DATA_READ] = { 626 .type = UE_BULK, 627 .endpoint = UE_ADDR_ANY, 628 .direction = UE_DIR_IN, 629 .bufsize = UMASS_BULK_SIZE, 630 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 631 .callback = &umass_t_cbi_data_read_callback, 632 .timeout = 0, /* overwritten later */ 633 }, 634 635 [UMASS_T_CBI_DATA_RD_CS] = { 636 .type = UE_CONTROL, 637 .endpoint = 0x00, /* Control pipe */ 638 .direction = UE_DIR_ANY, 639 .bufsize = sizeof(struct usb_device_request), 640 .callback = &umass_t_cbi_data_rd_cs_callback, 641 .timeout = 5000, /* 5 seconds */ 642 }, 643 644 [UMASS_T_CBI_DATA_WRITE] = { 645 .type = UE_BULK, 646 .endpoint = UE_ADDR_ANY, 647 .direction = UE_DIR_OUT, 648 .bufsize = UMASS_BULK_SIZE, 649 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 650 .callback = &umass_t_cbi_data_write_callback, 651 .timeout = 0, /* overwritten later */ 652 }, 653 654 [UMASS_T_CBI_DATA_WR_CS] = { 655 .type = UE_CONTROL, 656 .endpoint = 0x00, /* Control pipe */ 657 .direction = UE_DIR_ANY, 658 .bufsize = sizeof(struct usb_device_request), 659 .callback = &umass_t_cbi_data_wr_cs_callback, 660 .timeout = 5000, /* 5 seconds */ 661 }, 662 663 [UMASS_T_CBI_STATUS] = { 664 .type = UE_INTERRUPT, 665 .endpoint = UE_ADDR_ANY, 666 .direction = UE_DIR_IN, 667 .flags = {.short_xfer_ok = 1,.no_pipe_ok = 1,}, 668 .bufsize = sizeof(umass_cbi_sbl_t), 669 .callback = &umass_t_cbi_status_callback, 670 .timeout = 5000, /* ms */ 671 }, 672 673 [UMASS_T_CBI_RESET4] = { 674 .type = UE_CONTROL, 675 .endpoint = 0x00, /* Control pipe */ 676 .direction = UE_DIR_ANY, 677 .bufsize = sizeof(struct usb_device_request), 678 .callback = &umass_t_cbi_reset4_callback, 679 .timeout = 5000, /* ms */ 680 }, 681 }; 682 683 /* If device cannot return valid inquiry data, fake it */ 684 static const uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = { 685 0, /* removable */ 0x80, SCSI_REV_2, SCSI_REV_2, 686 /* additional_length */ 31, 0, 0, 0 687 }; 688 689 #define UFI_COMMAND_LENGTH 12 /* UFI commands are always 12 bytes */ 690 #define ATAPI_COMMAND_LENGTH 12 /* ATAPI commands are always 12 bytes */ 691 692 static device_method_t umass_methods[] = { 693 /* Device interface */ 694 DEVMETHOD(device_probe, umass_probe), 695 DEVMETHOD(device_attach, umass_attach), 696 DEVMETHOD(device_detach, umass_detach), 697 698 DEVMETHOD_END 699 }; 700 701 static driver_t umass_driver = { 702 .name = "umass", 703 .methods = umass_methods, 704 .size = sizeof(struct umass_softc), 705 }; 706 707 static const STRUCT_USB_HOST_ID __used umass_devs[] = { 708 /* generic mass storage class */ 709 {USB_IFACE_CLASS(UICLASS_MASS),}, 710 }; 711 712 DRIVER_MODULE(umass, uhub, umass_driver, NULL, NULL); 713 MODULE_DEPEND(umass, usb, 1, 1, 1); 714 MODULE_DEPEND(umass, cam, 1, 1, 1); 715 MODULE_VERSION(umass, 1); 716 USB_PNP_HOST_INFO(umass_devs); 717 718 /* 719 * USB device probe/attach/detach 720 */ 721 722 static uint16_t 723 umass_get_proto(struct usb_interface *iface) 724 { 725 struct usb_interface_descriptor *id; 726 uint16_t retval; 727 728 retval = 0; 729 730 /* Check for a standards compliant device */ 731 id = usbd_get_interface_descriptor(iface); 732 if ((id == NULL) || 733 (id->bInterfaceClass != UICLASS_MASS)) { 734 goto done; 735 } 736 switch (id->bInterfaceSubClass) { 737 case UISUBCLASS_SCSI: 738 retval |= UMASS_PROTO_SCSI; 739 break; 740 case UISUBCLASS_UFI: 741 retval |= UMASS_PROTO_UFI; 742 break; 743 case UISUBCLASS_RBC: 744 retval |= UMASS_PROTO_RBC; 745 break; 746 case UISUBCLASS_SFF8020I: 747 case UISUBCLASS_SFF8070I: 748 retval |= UMASS_PROTO_ATAPI; 749 break; 750 default: 751 goto done; 752 } 753 754 switch (id->bInterfaceProtocol) { 755 case UIPROTO_MASS_CBI: 756 retval |= UMASS_PROTO_CBI; 757 break; 758 case UIPROTO_MASS_CBI_I: 759 retval |= UMASS_PROTO_CBI_I; 760 break; 761 case UIPROTO_MASS_BBB_OLD: 762 case UIPROTO_MASS_BBB: 763 retval |= UMASS_PROTO_BBB; 764 break; 765 default: 766 goto done; 767 } 768 done: 769 return (retval); 770 } 771 772 /* 773 * Match the device we are seeing with the devices supported. 774 */ 775 static struct umass_probe_proto 776 umass_probe_proto(device_t dev, struct usb_attach_arg *uaa) 777 { 778 struct umass_probe_proto ret; 779 uint32_t quirks = NO_QUIRKS; 780 uint32_t proto = umass_get_proto(uaa->iface); 781 782 memset(&ret, 0, sizeof(ret)); 783 ret.error = BUS_PROBE_GENERIC; 784 785 /* Check if we should deny probing. */ 786 if (usb_test_quirk(uaa, UQ_MSC_IGNORE)) { 787 ret.error = ENXIO; 788 goto done; 789 } 790 791 /* Search for protocol enforcement */ 792 793 if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_BBB)) { 794 proto &= ~UMASS_PROTO_WIRE; 795 proto |= UMASS_PROTO_BBB; 796 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI)) { 797 proto &= ~UMASS_PROTO_WIRE; 798 proto |= UMASS_PROTO_CBI; 799 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI_I)) { 800 proto &= ~UMASS_PROTO_WIRE; 801 proto |= UMASS_PROTO_CBI_I; 802 } 803 804 if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_SCSI)) { 805 proto &= ~UMASS_PROTO_COMMAND; 806 proto |= UMASS_PROTO_SCSI; 807 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_ATAPI)) { 808 proto &= ~UMASS_PROTO_COMMAND; 809 proto |= UMASS_PROTO_ATAPI; 810 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_UFI)) { 811 proto &= ~UMASS_PROTO_COMMAND; 812 proto |= UMASS_PROTO_UFI; 813 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_RBC)) { 814 proto &= ~UMASS_PROTO_COMMAND; 815 proto |= UMASS_PROTO_RBC; 816 } 817 818 /* Check if the protocol is invalid */ 819 820 if ((proto & UMASS_PROTO_COMMAND) == 0) { 821 ret.error = ENXIO; 822 goto done; 823 } 824 825 if ((proto & UMASS_PROTO_WIRE) == 0) { 826 ret.error = ENXIO; 827 goto done; 828 } 829 830 /* Search for quirks */ 831 832 if (usb_test_quirk(uaa, UQ_MSC_NO_TEST_UNIT_READY)) 833 quirks |= NO_TEST_UNIT_READY; 834 if (usb_test_quirk(uaa, UQ_MSC_NO_RS_CLEAR_UA)) 835 quirks |= RS_NO_CLEAR_UA; 836 if (usb_test_quirk(uaa, UQ_MSC_NO_START_STOP)) 837 quirks |= NO_START_STOP; 838 if (usb_test_quirk(uaa, UQ_MSC_NO_GETMAXLUN)) 839 quirks |= NO_GETMAXLUN; 840 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY)) 841 quirks |= NO_INQUIRY; 842 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY_EVPD)) 843 quirks |= NO_INQUIRY_EVPD; 844 if (usb_test_quirk(uaa, UQ_MSC_NO_PREVENT_ALLOW)) 845 quirks |= NO_PREVENT_ALLOW; 846 if (usb_test_quirk(uaa, UQ_MSC_NO_SYNC_CACHE)) 847 quirks |= NO_SYNCHRONIZE_CACHE; 848 if (usb_test_quirk(uaa, UQ_MSC_SHUTTLE_INIT)) 849 quirks |= SHUTTLE_INIT; 850 if (usb_test_quirk(uaa, UQ_MSC_ALT_IFACE_1)) 851 quirks |= ALT_IFACE_1; 852 if (usb_test_quirk(uaa, UQ_MSC_FLOPPY_SPEED)) 853 quirks |= FLOPPY_SPEED; 854 if (usb_test_quirk(uaa, UQ_MSC_IGNORE_RESIDUE)) 855 quirks |= IGNORE_RESIDUE; 856 if (usb_test_quirk(uaa, UQ_MSC_WRONG_CSWSIG)) 857 quirks |= WRONG_CSWSIG; 858 if (usb_test_quirk(uaa, UQ_MSC_RBC_PAD_TO_12)) 859 quirks |= RBC_PAD_TO_12; 860 if (usb_test_quirk(uaa, UQ_MSC_READ_CAP_OFFBY1)) 861 quirks |= READ_CAPACITY_OFFBY1; 862 if (usb_test_quirk(uaa, UQ_MSC_FORCE_SHORT_INQ)) 863 quirks |= FORCE_SHORT_INQUIRY; 864 865 done: 866 ret.quirks = quirks; 867 ret.proto = proto; 868 return (ret); 869 } 870 871 static int 872 umass_probe(device_t dev) 873 { 874 struct usb_attach_arg *uaa = device_get_ivars(dev); 875 struct umass_probe_proto temp; 876 877 if (uaa->usb_mode != USB_MODE_HOST) { 878 return (ENXIO); 879 } 880 temp = umass_probe_proto(dev, uaa); 881 882 return (temp.error); 883 } 884 885 static int 886 umass_attach(device_t dev) 887 { 888 struct umass_softc *sc = device_get_softc(dev); 889 struct usb_attach_arg *uaa = device_get_ivars(dev); 890 struct umass_probe_proto temp = umass_probe_proto(dev, uaa); 891 struct usb_interface_descriptor *id; 892 int err; 893 894 /* 895 * NOTE: the softc struct is cleared in device_set_driver. 896 * We can safely call umass_detach without specifically 897 * initializing the struct. 898 */ 899 900 sc->sc_dev = dev; 901 sc->sc_udev = uaa->device; 902 sc->sc_proto = temp.proto; 903 sc->sc_quirks = temp.quirks; 904 sc->sc_unit = device_get_unit(dev); 905 906 snprintf(sc->sc_name, sizeof(sc->sc_name), 907 "%s", device_get_nameunit(dev)); 908 909 device_set_usb_desc(dev); 910 911 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), 912 NULL, MTX_DEF | MTX_RECURSE); 913 914 /* get interface index */ 915 916 id = usbd_get_interface_descriptor(uaa->iface); 917 if (id == NULL) { 918 device_printf(dev, "failed to get " 919 "interface number\n"); 920 goto detach; 921 } 922 sc->sc_iface_no = id->bInterfaceNumber; 923 924 #ifdef USB_DEBUG 925 device_printf(dev, " "); 926 927 switch (sc->sc_proto & UMASS_PROTO_COMMAND) { 928 case UMASS_PROTO_SCSI: 929 printf("SCSI"); 930 break; 931 case UMASS_PROTO_ATAPI: 932 printf("8070i (ATAPI)"); 933 break; 934 case UMASS_PROTO_UFI: 935 printf("UFI"); 936 break; 937 case UMASS_PROTO_RBC: 938 printf("RBC"); 939 break; 940 default: 941 printf("(unknown 0x%02x)", 942 sc->sc_proto & UMASS_PROTO_COMMAND); 943 break; 944 } 945 946 printf(" over "); 947 948 switch (sc->sc_proto & UMASS_PROTO_WIRE) { 949 case UMASS_PROTO_BBB: 950 printf("Bulk-Only"); 951 break; 952 case UMASS_PROTO_CBI: /* uses Comand/Bulk pipes */ 953 printf("CBI"); 954 break; 955 case UMASS_PROTO_CBI_I: /* uses Comand/Bulk/Interrupt pipes */ 956 printf("CBI with CCI"); 957 break; 958 default: 959 printf("(unknown 0x%02x)", 960 sc->sc_proto & UMASS_PROTO_WIRE); 961 } 962 963 printf("; quirks = 0x%04x\n", sc->sc_quirks); 964 #endif 965 966 if (sc->sc_quirks & ALT_IFACE_1) { 967 err = usbd_set_alt_interface_index 968 (uaa->device, uaa->info.bIfaceIndex, 1); 969 970 if (err) { 971 DPRINTF(sc, UDMASS_USB, "could not switch to " 972 "Alt Interface 1\n"); 973 goto detach; 974 } 975 } 976 /* allocate all required USB transfers */ 977 978 if (sc->sc_proto & UMASS_PROTO_BBB) { 979 err = usbd_transfer_setup(uaa->device, 980 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_bbb_config, 981 UMASS_T_BBB_MAX, sc, &sc->sc_mtx); 982 983 /* skip reset first time */ 984 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 985 986 } else if (sc->sc_proto & (UMASS_PROTO_CBI | UMASS_PROTO_CBI_I)) { 987 err = usbd_transfer_setup(uaa->device, 988 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_cbi_config, 989 UMASS_T_CBI_MAX, sc, &sc->sc_mtx); 990 991 /* skip reset first time */ 992 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 993 994 } else { 995 err = USB_ERR_INVAL; 996 } 997 998 if (err) { 999 device_printf(dev, "could not setup required " 1000 "transfers, %s\n", usbd_errstr(err)); 1001 goto detach; 1002 } 1003 #ifdef USB_DEBUG 1004 if (umass_throttle > 0) { 1005 uint8_t x; 1006 int iv; 1007 1008 iv = umass_throttle; 1009 1010 if (iv < 1) 1011 iv = 1; 1012 else if (iv > 8000) 1013 iv = 8000; 1014 1015 for (x = 0; x != UMASS_T_MAX; x++) { 1016 if (sc->sc_xfer[x] != NULL) 1017 usbd_xfer_set_interval(sc->sc_xfer[x], iv); 1018 } 1019 } 1020 #endif 1021 sc->sc_transform = 1022 (sc->sc_proto & UMASS_PROTO_SCSI) ? &umass_scsi_transform : 1023 (sc->sc_proto & UMASS_PROTO_UFI) ? &umass_ufi_transform : 1024 (sc->sc_proto & UMASS_PROTO_ATAPI) ? &umass_atapi_transform : 1025 (sc->sc_proto & UMASS_PROTO_RBC) ? &umass_rbc_transform : 1026 &umass_no_transform; 1027 1028 /* from here onwards the device can be used. */ 1029 1030 if (sc->sc_quirks & SHUTTLE_INIT) { 1031 umass_init_shuttle(sc); 1032 } 1033 /* get the maximum LUN supported by the device */ 1034 1035 if (((sc->sc_proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB) && 1036 !(sc->sc_quirks & NO_GETMAXLUN)) 1037 sc->sc_maxlun = umass_bbb_get_max_lun(sc); 1038 else 1039 sc->sc_maxlun = 0; 1040 1041 /* Prepare the SCSI command block */ 1042 sc->cam_scsi_sense.opcode = REQUEST_SENSE; 1043 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY; 1044 1045 /* register the SIM */ 1046 err = umass_cam_attach_sim(sc); 1047 if (err) { 1048 goto detach; 1049 } 1050 /* scan the SIM */ 1051 umass_cam_attach(sc); 1052 1053 DPRINTF(sc, UDMASS_GEN, "Attach finished\n"); 1054 1055 return (0); /* success */ 1056 1057 detach: 1058 umass_detach(dev); 1059 return (ENXIO); /* failure */ 1060 } 1061 1062 static int 1063 umass_detach(device_t dev) 1064 { 1065 struct umass_softc *sc = device_get_softc(dev); 1066 1067 DPRINTF(sc, UDMASS_USB, "\n"); 1068 1069 /* teardown our statemachine */ 1070 1071 usbd_transfer_unsetup(sc->sc_xfer, UMASS_T_MAX); 1072 1073 mtx_lock(&sc->sc_mtx); 1074 1075 /* cancel any leftover CCB's */ 1076 1077 umass_cancel_ccb(sc); 1078 1079 umass_cam_detach_sim(sc); 1080 1081 mtx_unlock(&sc->sc_mtx); 1082 1083 mtx_destroy(&sc->sc_mtx); 1084 1085 return (0); /* success */ 1086 } 1087 1088 static void 1089 umass_init_shuttle(struct umass_softc *sc) 1090 { 1091 struct usb_device_request req; 1092 uint8_t status[2] = {0, 0}; 1093 1094 /* 1095 * The Linux driver does this, but no one can tell us what the 1096 * command does. 1097 */ 1098 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1099 req.bRequest = 1; /* XXX unknown command */ 1100 USETW(req.wValue, 0); 1101 req.wIndex[0] = sc->sc_iface_no; 1102 req.wIndex[1] = 0; 1103 USETW(req.wLength, sizeof(status)); 1104 usbd_do_request(sc->sc_udev, NULL, &req, &status); 1105 1106 DPRINTF(sc, UDMASS_GEN, "Shuttle init returned 0x%02x%02x\n", 1107 status[0], status[1]); 1108 } 1109 1110 /* 1111 * Generic functions to handle transfers 1112 */ 1113 1114 static void 1115 umass_transfer_start(struct umass_softc *sc, uint8_t xfer_index) 1116 { 1117 DPRINTF(sc, UDMASS_GEN, "transfer index = " 1118 "%d\n", xfer_index); 1119 1120 if (sc->sc_xfer[xfer_index]) { 1121 sc->sc_last_xfer_index = xfer_index; 1122 usbd_transfer_start(sc->sc_xfer[xfer_index]); 1123 } else { 1124 umass_cancel_ccb(sc); 1125 } 1126 } 1127 1128 static void 1129 umass_reset(struct umass_softc *sc) 1130 { 1131 DPRINTF(sc, UDMASS_GEN, "resetting device\n"); 1132 1133 /* 1134 * stop the last transfer, if not already stopped: 1135 */ 1136 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 1137 umass_transfer_start(sc, 0); 1138 } 1139 1140 static void 1141 umass_cancel_ccb(struct umass_softc *sc) 1142 { 1143 union ccb *ccb; 1144 1145 USB_MTX_ASSERT(&sc->sc_mtx, MA_OWNED); 1146 1147 ccb = sc->sc_transfer.ccb; 1148 sc->sc_transfer.ccb = NULL; 1149 sc->sc_last_xfer_index = 0; 1150 1151 if (ccb) { 1152 (sc->sc_transfer.callback) 1153 (sc, ccb, (sc->sc_transfer.data_len - 1154 sc->sc_transfer.actlen), STATUS_WIRE_FAILED); 1155 } 1156 } 1157 1158 static void 1159 umass_tr_error(struct usb_xfer *xfer, usb_error_t error) 1160 { 1161 struct umass_softc *sc = usbd_xfer_softc(xfer); 1162 1163 if (error != USB_ERR_CANCELLED) { 1164 DPRINTF(sc, UDMASS_GEN, "transfer error, %s -> " 1165 "reset\n", usbd_errstr(error)); 1166 } 1167 umass_cancel_ccb(sc); 1168 } 1169 1170 /* 1171 * BBB protocol specific functions 1172 */ 1173 1174 static void 1175 umass_t_bbb_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1176 { 1177 struct umass_softc *sc = usbd_xfer_softc(xfer); 1178 struct usb_device_request req; 1179 struct usb_page_cache *pc; 1180 1181 switch (USB_GET_STATE(xfer)) { 1182 case USB_ST_TRANSFERRED: 1183 umass_transfer_start(sc, UMASS_T_BBB_RESET2); 1184 return; 1185 1186 case USB_ST_SETUP: 1187 /* 1188 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1189 * 1190 * For Reset Recovery the host shall issue in the following order: 1191 * a) a Bulk-Only Mass Storage Reset 1192 * b) a Clear Feature HALT to the Bulk-In endpoint 1193 * c) a Clear Feature HALT to the Bulk-Out endpoint 1194 * 1195 * This is done in 3 steps, using 3 transfers: 1196 * UMASS_T_BBB_RESET1 1197 * UMASS_T_BBB_RESET2 1198 * UMASS_T_BBB_RESET3 1199 */ 1200 1201 DPRINTF(sc, UDMASS_BBB, "BBB reset!\n"); 1202 1203 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1204 req.bRequest = UR_BBB_RESET; /* bulk only reset */ 1205 USETW(req.wValue, 0); 1206 req.wIndex[0] = sc->sc_iface_no; 1207 req.wIndex[1] = 0; 1208 USETW(req.wLength, 0); 1209 1210 pc = usbd_xfer_get_frame(xfer, 0); 1211 usbd_copy_in(pc, 0, &req, sizeof(req)); 1212 1213 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1214 usbd_xfer_set_frames(xfer, 1); 1215 usbd_transfer_submit(xfer); 1216 return; 1217 1218 default: /* Error */ 1219 umass_tr_error(xfer, error); 1220 return; 1221 } 1222 } 1223 1224 static void 1225 umass_t_bbb_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1226 { 1227 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_RESET3, 1228 UMASS_T_BBB_DATA_READ, error); 1229 } 1230 1231 static void 1232 umass_t_bbb_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1233 { 1234 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_COMMAND, 1235 UMASS_T_BBB_DATA_WRITE, error); 1236 } 1237 1238 static void 1239 umass_t_bbb_data_clear_stall_callback(struct usb_xfer *xfer, 1240 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1241 { 1242 struct umass_softc *sc = usbd_xfer_softc(xfer); 1243 1244 switch (USB_GET_STATE(xfer)) { 1245 case USB_ST_TRANSFERRED: 1246 tr_transferred: 1247 umass_transfer_start(sc, next_xfer); 1248 return; 1249 1250 case USB_ST_SETUP: 1251 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1252 goto tr_transferred; 1253 } 1254 return; 1255 1256 default: /* Error */ 1257 umass_tr_error(xfer, error); 1258 return; 1259 } 1260 } 1261 1262 static void 1263 umass_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 1264 { 1265 struct umass_softc *sc = usbd_xfer_softc(xfer); 1266 union ccb *ccb = sc->sc_transfer.ccb; 1267 struct usb_page_cache *pc; 1268 uint32_t tag; 1269 1270 switch (USB_GET_STATE(xfer)) { 1271 case USB_ST_TRANSFERRED: 1272 umass_transfer_start 1273 (sc, ((sc->sc_transfer.dir == DIR_IN) ? UMASS_T_BBB_DATA_READ : 1274 (sc->sc_transfer.dir == DIR_OUT) ? UMASS_T_BBB_DATA_WRITE : 1275 UMASS_T_BBB_STATUS)); 1276 return; 1277 1278 case USB_ST_SETUP: 1279 1280 sc->sc_status_try = 0; 1281 1282 if (ccb) { 1283 /* 1284 * the initial value is not important, 1285 * as long as the values are unique: 1286 */ 1287 tag = UGETDW(sc->cbw.dCBWTag) + 1; 1288 1289 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1290 USETDW(sc->cbw.dCBWTag, tag); 1291 1292 /* 1293 * dCBWDataTransferLength: 1294 * This field indicates the number of bytes of data that the host 1295 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1296 * the Direction bit) during the execution of this command. If this 1297 * field is set to 0, the device will expect that no data will be 1298 * transferred IN or OUT during this command, regardless of the value 1299 * of the Direction bit defined in dCBWFlags. 1300 */ 1301 USETDW(sc->cbw.dCBWDataTransferLength, sc->sc_transfer.data_len); 1302 1303 /* 1304 * dCBWFlags: 1305 * The bits of the Flags field are defined as follows: 1306 * Bits 0-6 reserved 1307 * Bit 7 Direction - this bit shall be ignored if the 1308 * dCBWDataTransferLength field is zero. 1309 * 0 = data Out from host to device 1310 * 1 = data In from device to host 1311 */ 1312 sc->cbw.bCBWFlags = ((sc->sc_transfer.dir == DIR_IN) ? 1313 CBWFLAGS_IN : CBWFLAGS_OUT); 1314 sc->cbw.bCBWLUN = sc->sc_transfer.lun; 1315 1316 if (sc->sc_transfer.cmd_len > sizeof(sc->cbw.CBWCDB)) { 1317 sc->sc_transfer.cmd_len = sizeof(sc->cbw.CBWCDB); 1318 DPRINTF(sc, UDMASS_BBB, "Truncating long command!\n"); 1319 } 1320 sc->cbw.bCDBLength = sc->sc_transfer.cmd_len; 1321 1322 /* copy SCSI command data */ 1323 memcpy(sc->cbw.CBWCDB, sc->sc_transfer.cmd_data, 1324 sc->sc_transfer.cmd_len); 1325 1326 /* clear remaining command area */ 1327 memset(sc->cbw.CBWCDB + 1328 sc->sc_transfer.cmd_len, 0, 1329 sizeof(sc->cbw.CBWCDB) - 1330 sc->sc_transfer.cmd_len); 1331 1332 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1333 1334 pc = usbd_xfer_get_frame(xfer, 0); 1335 usbd_copy_in(pc, 0, &sc->cbw, sizeof(sc->cbw)); 1336 usbd_xfer_set_frame_len(xfer, 0, sizeof(sc->cbw)); 1337 1338 usbd_transfer_submit(xfer); 1339 } 1340 return; 1341 1342 default: /* Error */ 1343 umass_tr_error(xfer, error); 1344 return; 1345 } 1346 } 1347 1348 static void 1349 umass_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1350 { 1351 struct umass_softc *sc = usbd_xfer_softc(xfer); 1352 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1353 int actlen, sumlen; 1354 1355 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1356 1357 switch (USB_GET_STATE(xfer)) { 1358 case USB_ST_TRANSFERRED: 1359 sc->sc_transfer.data_rem -= actlen; 1360 sc->sc_transfer.data_ptr += actlen; 1361 sc->sc_transfer.actlen += actlen; 1362 1363 if (actlen < sumlen) { 1364 /* short transfer */ 1365 sc->sc_transfer.data_rem = 0; 1366 } 1367 case USB_ST_SETUP: 1368 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1369 max_bulk, sc->sc_transfer.data_rem); 1370 1371 if (sc->sc_transfer.data_rem == 0) { 1372 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1373 return; 1374 } 1375 if (max_bulk > sc->sc_transfer.data_rem) { 1376 max_bulk = sc->sc_transfer.data_rem; 1377 } 1378 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1379 1380 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1381 max_bulk); 1382 1383 usbd_transfer_submit(xfer); 1384 return; 1385 1386 default: /* Error */ 1387 if (error == USB_ERR_CANCELLED) { 1388 umass_tr_error(xfer, error); 1389 } else { 1390 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1391 } 1392 return; 1393 } 1394 } 1395 1396 static void 1397 umass_t_bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1398 { 1399 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1400 UMASS_T_BBB_DATA_READ, error); 1401 } 1402 1403 static void 1404 umass_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1405 { 1406 struct umass_softc *sc = usbd_xfer_softc(xfer); 1407 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1408 int actlen, sumlen; 1409 1410 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1411 1412 switch (USB_GET_STATE(xfer)) { 1413 case USB_ST_TRANSFERRED: 1414 sc->sc_transfer.data_rem -= actlen; 1415 sc->sc_transfer.data_ptr += actlen; 1416 sc->sc_transfer.actlen += actlen; 1417 1418 if (actlen < sumlen) { 1419 /* short transfer */ 1420 sc->sc_transfer.data_rem = 0; 1421 } 1422 case USB_ST_SETUP: 1423 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1424 max_bulk, sc->sc_transfer.data_rem); 1425 1426 if (sc->sc_transfer.data_rem == 0) { 1427 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1428 return; 1429 } 1430 if (max_bulk > sc->sc_transfer.data_rem) { 1431 max_bulk = sc->sc_transfer.data_rem; 1432 } 1433 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1434 1435 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1436 max_bulk); 1437 1438 usbd_transfer_submit(xfer); 1439 return; 1440 1441 default: /* Error */ 1442 if (error == USB_ERR_CANCELLED) { 1443 umass_tr_error(xfer, error); 1444 } else { 1445 umass_transfer_start(sc, UMASS_T_BBB_DATA_WR_CS); 1446 } 1447 return; 1448 } 1449 } 1450 1451 static void 1452 umass_t_bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1453 { 1454 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1455 UMASS_T_BBB_DATA_WRITE, error); 1456 } 1457 1458 static void 1459 umass_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 1460 { 1461 struct umass_softc *sc = usbd_xfer_softc(xfer); 1462 union ccb *ccb = sc->sc_transfer.ccb; 1463 struct usb_page_cache *pc; 1464 uint32_t residue; 1465 int actlen; 1466 1467 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1468 1469 switch (USB_GET_STATE(xfer)) { 1470 case USB_ST_TRANSFERRED: 1471 1472 /* 1473 * Do a full reset if there is something wrong with the CSW: 1474 */ 1475 sc->sc_status_try = 1; 1476 1477 /* Zero missing parts of the CSW: */ 1478 1479 if (actlen < (int)sizeof(sc->csw)) 1480 memset(&sc->csw, 0, sizeof(sc->csw)); 1481 1482 pc = usbd_xfer_get_frame(xfer, 0); 1483 usbd_copy_out(pc, 0, &sc->csw, actlen); 1484 1485 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1486 1487 residue = UGETDW(sc->csw.dCSWDataResidue); 1488 1489 if ((!residue) || (sc->sc_quirks & IGNORE_RESIDUE)) { 1490 residue = (sc->sc_transfer.data_len - 1491 sc->sc_transfer.actlen); 1492 } 1493 if (residue > sc->sc_transfer.data_len) { 1494 DPRINTF(sc, UDMASS_BBB, "truncating residue from %d " 1495 "to %d bytes\n", residue, sc->sc_transfer.data_len); 1496 residue = sc->sc_transfer.data_len; 1497 } 1498 /* translate weird command-status signatures: */ 1499 if (sc->sc_quirks & WRONG_CSWSIG) { 1500 uint32_t temp = UGETDW(sc->csw.dCSWSignature); 1501 1502 if ((temp == CSWSIGNATURE_OLYMPUS_C1) || 1503 (temp == CSWSIGNATURE_IMAGINATION_DBX1)) { 1504 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1505 } 1506 } 1507 /* check CSW and handle eventual error */ 1508 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1509 DPRINTF(sc, UDMASS_BBB, "bad CSW signature 0x%08x != 0x%08x\n", 1510 UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); 1511 /* 1512 * Invalid CSW: Wrong signature or wrong tag might 1513 * indicate that we lost synchronization. Reset the 1514 * device. 1515 */ 1516 goto tr_error; 1517 } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { 1518 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: tag 0x%08x should be " 1519 "0x%08x\n", UGETDW(sc->csw.dCSWTag), 1520 UGETDW(sc->cbw.dCBWTag)); 1521 goto tr_error; 1522 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1523 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: status %d > %d\n", 1524 sc->csw.bCSWStatus, CSWSTATUS_PHASE); 1525 goto tr_error; 1526 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1527 DPRINTF(sc, UDMASS_BBB, "Phase error, residue = " 1528 "%d\n", residue); 1529 goto tr_error; 1530 } else if (sc->sc_transfer.actlen > sc->sc_transfer.data_len) { 1531 DPRINTF(sc, UDMASS_BBB, "Buffer overrun %d > %d\n", 1532 sc->sc_transfer.actlen, sc->sc_transfer.data_len); 1533 goto tr_error; 1534 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1535 DPRINTF(sc, UDMASS_BBB, "Command failed, residue = " 1536 "%d\n", residue); 1537 1538 sc->sc_transfer.ccb = NULL; 1539 1540 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1541 1542 (sc->sc_transfer.callback) 1543 (sc, ccb, residue, STATUS_CMD_FAILED); 1544 } else { 1545 sc->sc_transfer.ccb = NULL; 1546 1547 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1548 1549 (sc->sc_transfer.callback) 1550 (sc, ccb, residue, STATUS_CMD_OK); 1551 } 1552 return; 1553 1554 case USB_ST_SETUP: 1555 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 1556 usbd_transfer_submit(xfer); 1557 return; 1558 1559 default: 1560 tr_error: 1561 DPRINTF(sc, UDMASS_BBB, "Failed to read CSW: %s, try %d\n", 1562 usbd_errstr(error), sc->sc_status_try); 1563 1564 if ((error == USB_ERR_CANCELLED) || 1565 (sc->sc_status_try)) { 1566 umass_tr_error(xfer, error); 1567 } else { 1568 sc->sc_status_try = 1; 1569 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1570 } 1571 return; 1572 } 1573 } 1574 1575 static void 1576 umass_command_start(struct umass_softc *sc, uint8_t dir, 1577 void *data_ptr, uint32_t data_len, 1578 uint32_t data_timeout, umass_callback_t *callback, 1579 union ccb *ccb) 1580 { 1581 sc->sc_transfer.lun = ccb->ccb_h.target_lun; 1582 1583 /* 1584 * NOTE: assumes that "sc->sc_transfer.cmd_data" and 1585 * "sc->sc_transfer.cmd_len" has been properly 1586 * initialized. 1587 */ 1588 1589 sc->sc_transfer.dir = data_len ? dir : DIR_NONE; 1590 sc->sc_transfer.data_ptr = data_ptr; 1591 sc->sc_transfer.data_len = data_len; 1592 sc->sc_transfer.data_rem = data_len; 1593 sc->sc_transfer.data_timeout = (data_timeout + UMASS_TIMEOUT); 1594 1595 sc->sc_transfer.actlen = 0; 1596 sc->sc_transfer.callback = callback; 1597 sc->sc_transfer.ccb = ccb; 1598 1599 if (sc->sc_xfer[sc->sc_last_xfer_index]) { 1600 usbd_transfer_start(sc->sc_xfer[sc->sc_last_xfer_index]); 1601 } else { 1602 umass_cancel_ccb(sc); 1603 } 1604 } 1605 1606 static uint8_t 1607 umass_bbb_get_max_lun(struct umass_softc *sc) 1608 { 1609 struct usb_device_request req; 1610 usb_error_t err; 1611 uint8_t buf = 0; 1612 1613 /* The Get Max Lun command is a class-specific request. */ 1614 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1615 req.bRequest = UR_BBB_GET_MAX_LUN; 1616 USETW(req.wValue, 0); 1617 req.wIndex[0] = sc->sc_iface_no; 1618 req.wIndex[1] = 0; 1619 USETW(req.wLength, 1); 1620 1621 err = usbd_do_request(sc->sc_udev, NULL, &req, &buf); 1622 if (err) { 1623 buf = 0; 1624 1625 /* Device doesn't support Get Max Lun request. */ 1626 printf("%s: Get Max Lun not supported (%s)\n", 1627 sc->sc_name, usbd_errstr(err)); 1628 } 1629 return (buf); 1630 } 1631 1632 /* 1633 * Command/Bulk/Interrupt (CBI) specific functions 1634 */ 1635 1636 static void 1637 umass_cbi_start_status(struct umass_softc *sc) 1638 { 1639 if (sc->sc_xfer[UMASS_T_CBI_STATUS]) { 1640 umass_transfer_start(sc, UMASS_T_CBI_STATUS); 1641 } else { 1642 union ccb *ccb = sc->sc_transfer.ccb; 1643 1644 sc->sc_transfer.ccb = NULL; 1645 1646 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1647 1648 (sc->sc_transfer.callback) 1649 (sc, ccb, (sc->sc_transfer.data_len - 1650 sc->sc_transfer.actlen), STATUS_CMD_UNKNOWN); 1651 } 1652 } 1653 1654 static void 1655 umass_t_cbi_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1656 { 1657 struct umass_softc *sc = usbd_xfer_softc(xfer); 1658 struct usb_device_request req; 1659 struct usb_page_cache *pc; 1660 uint8_t buf[UMASS_CBI_DIAGNOSTIC_CMDLEN]; 1661 1662 uint8_t i; 1663 1664 switch (USB_GET_STATE(xfer)) { 1665 case USB_ST_TRANSFERRED: 1666 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1667 break; 1668 1669 case USB_ST_SETUP: 1670 /* 1671 * Command Block Reset Protocol 1672 * 1673 * First send a reset request to the device. Then clear 1674 * any possibly stalled bulk endpoints. 1675 * 1676 * This is done in 3 steps, using 3 transfers: 1677 * UMASS_T_CBI_RESET1 1678 * UMASS_T_CBI_RESET2 1679 * UMASS_T_CBI_RESET3 1680 * UMASS_T_CBI_RESET4 (only if there is an interrupt endpoint) 1681 */ 1682 1683 DPRINTF(sc, UDMASS_CBI, "CBI reset!\n"); 1684 1685 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1686 req.bRequest = UR_CBI_ADSC; 1687 USETW(req.wValue, 0); 1688 req.wIndex[0] = sc->sc_iface_no; 1689 req.wIndex[1] = 0; 1690 USETW(req.wLength, UMASS_CBI_DIAGNOSTIC_CMDLEN); 1691 1692 /* 1693 * The 0x1d code is the SEND DIAGNOSTIC command. To 1694 * distinguish between the two, the last 10 bytes of the CBL 1695 * is filled with 0xff (section 2.2 of the CBI 1696 * specification) 1697 */ 1698 buf[0] = 0x1d; /* Command Block Reset */ 1699 buf[1] = 0x04; 1700 1701 for (i = 2; i < UMASS_CBI_DIAGNOSTIC_CMDLEN; i++) { 1702 buf[i] = 0xff; 1703 } 1704 1705 pc = usbd_xfer_get_frame(xfer, 0); 1706 usbd_copy_in(pc, 0, &req, sizeof(req)); 1707 pc = usbd_xfer_get_frame(xfer, 1); 1708 usbd_copy_in(pc, 0, buf, sizeof(buf)); 1709 1710 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1711 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); 1712 usbd_xfer_set_frames(xfer, 2); 1713 usbd_transfer_submit(xfer); 1714 break; 1715 1716 default: /* Error */ 1717 if (error == USB_ERR_CANCELLED) 1718 umass_tr_error(xfer, error); 1719 else 1720 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1721 break; 1722 } 1723 } 1724 1725 static void 1726 umass_t_cbi_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1727 { 1728 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_RESET3, 1729 UMASS_T_CBI_DATA_READ, error); 1730 } 1731 1732 static void 1733 umass_t_cbi_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1734 { 1735 struct umass_softc *sc = usbd_xfer_softc(xfer); 1736 1737 umass_t_cbi_data_clear_stall_callback 1738 (xfer, (sc->sc_xfer[UMASS_T_CBI_RESET4] && 1739 sc->sc_xfer[UMASS_T_CBI_STATUS]) ? 1740 UMASS_T_CBI_RESET4 : UMASS_T_CBI_COMMAND, 1741 UMASS_T_CBI_DATA_WRITE, error); 1742 } 1743 1744 static void 1745 umass_t_cbi_reset4_callback(struct usb_xfer *xfer, usb_error_t error) 1746 { 1747 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_COMMAND, 1748 UMASS_T_CBI_STATUS, error); 1749 } 1750 1751 static void 1752 umass_t_cbi_data_clear_stall_callback(struct usb_xfer *xfer, 1753 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1754 { 1755 struct umass_softc *sc = usbd_xfer_softc(xfer); 1756 1757 switch (USB_GET_STATE(xfer)) { 1758 case USB_ST_TRANSFERRED: 1759 tr_transferred: 1760 if (next_xfer == UMASS_T_CBI_STATUS) { 1761 umass_cbi_start_status(sc); 1762 } else { 1763 umass_transfer_start(sc, next_xfer); 1764 } 1765 break; 1766 1767 case USB_ST_SETUP: 1768 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1769 goto tr_transferred; /* should not happen */ 1770 } 1771 break; 1772 1773 default: /* Error */ 1774 umass_tr_error(xfer, error); 1775 break; 1776 } 1777 } 1778 1779 static void 1780 umass_t_cbi_command_callback(struct usb_xfer *xfer, usb_error_t error) 1781 { 1782 struct umass_softc *sc = usbd_xfer_softc(xfer); 1783 union ccb *ccb = sc->sc_transfer.ccb; 1784 struct usb_device_request req; 1785 struct usb_page_cache *pc; 1786 1787 switch (USB_GET_STATE(xfer)) { 1788 case USB_ST_TRANSFERRED: 1789 1790 if (sc->sc_transfer.dir == DIR_NONE) { 1791 umass_cbi_start_status(sc); 1792 } else { 1793 umass_transfer_start 1794 (sc, (sc->sc_transfer.dir == DIR_IN) ? 1795 UMASS_T_CBI_DATA_READ : UMASS_T_CBI_DATA_WRITE); 1796 } 1797 break; 1798 1799 case USB_ST_SETUP: 1800 1801 if (ccb) { 1802 /* 1803 * do a CBI transfer with cmd_len bytes from 1804 * cmd_data, possibly a data phase of data_len 1805 * bytes from/to the device and finally a status 1806 * read phase. 1807 */ 1808 1809 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1810 req.bRequest = UR_CBI_ADSC; 1811 USETW(req.wValue, 0); 1812 req.wIndex[0] = sc->sc_iface_no; 1813 req.wIndex[1] = 0; 1814 req.wLength[0] = sc->sc_transfer.cmd_len; 1815 req.wLength[1] = 0; 1816 1817 pc = usbd_xfer_get_frame(xfer, 0); 1818 usbd_copy_in(pc, 0, &req, sizeof(req)); 1819 pc = usbd_xfer_get_frame(xfer, 1); 1820 usbd_copy_in(pc, 0, sc->sc_transfer.cmd_data, 1821 sc->sc_transfer.cmd_len); 1822 1823 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1824 usbd_xfer_set_frame_len(xfer, 1, sc->sc_transfer.cmd_len); 1825 usbd_xfer_set_frames(xfer, 1826 sc->sc_transfer.cmd_len ? 2 : 1); 1827 1828 DIF(UDMASS_CBI, 1829 umass_cbi_dump_cmd(sc, 1830 sc->sc_transfer.cmd_data, 1831 sc->sc_transfer.cmd_len)); 1832 1833 usbd_transfer_submit(xfer); 1834 } 1835 break; 1836 1837 default: /* Error */ 1838 /* 1839 * STALL on the control pipe can be result of the command error. 1840 * Attempt to clear this STALL same as for bulk pipe also 1841 * results in command completion interrupt, but ASC/ASCQ there 1842 * look like not always valid, so don't bother about it. 1843 */ 1844 if ((error == USB_ERR_STALLED) || 1845 (sc->sc_transfer.callback == &umass_cam_cb)) { 1846 sc->sc_transfer.ccb = NULL; 1847 (sc->sc_transfer.callback) 1848 (sc, ccb, sc->sc_transfer.data_len, 1849 STATUS_CMD_UNKNOWN); 1850 } else { 1851 umass_tr_error(xfer, error); 1852 /* skip reset */ 1853 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1854 } 1855 break; 1856 } 1857 } 1858 1859 static void 1860 umass_t_cbi_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1861 { 1862 struct umass_softc *sc = usbd_xfer_softc(xfer); 1863 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1864 int actlen, sumlen; 1865 1866 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1867 1868 switch (USB_GET_STATE(xfer)) { 1869 case USB_ST_TRANSFERRED: 1870 sc->sc_transfer.data_rem -= actlen; 1871 sc->sc_transfer.data_ptr += actlen; 1872 sc->sc_transfer.actlen += actlen; 1873 1874 if (actlen < sumlen) { 1875 /* short transfer */ 1876 sc->sc_transfer.data_rem = 0; 1877 } 1878 case USB_ST_SETUP: 1879 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1880 max_bulk, sc->sc_transfer.data_rem); 1881 1882 if (sc->sc_transfer.data_rem == 0) { 1883 umass_cbi_start_status(sc); 1884 break; 1885 } 1886 if (max_bulk > sc->sc_transfer.data_rem) { 1887 max_bulk = sc->sc_transfer.data_rem; 1888 } 1889 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1890 1891 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1892 max_bulk); 1893 1894 usbd_transfer_submit(xfer); 1895 break; 1896 1897 default: /* Error */ 1898 if ((error == USB_ERR_CANCELLED) || 1899 (sc->sc_transfer.callback != &umass_cam_cb)) { 1900 umass_tr_error(xfer, error); 1901 } else { 1902 umass_transfer_start(sc, UMASS_T_CBI_DATA_RD_CS); 1903 } 1904 break; 1905 } 1906 } 1907 1908 static void 1909 umass_t_cbi_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1910 { 1911 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1912 UMASS_T_CBI_DATA_READ, error); 1913 } 1914 1915 static void 1916 umass_t_cbi_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1917 { 1918 struct umass_softc *sc = usbd_xfer_softc(xfer); 1919 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1920 int actlen, sumlen; 1921 1922 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1923 1924 switch (USB_GET_STATE(xfer)) { 1925 case USB_ST_TRANSFERRED: 1926 sc->sc_transfer.data_rem -= actlen; 1927 sc->sc_transfer.data_ptr += actlen; 1928 sc->sc_transfer.actlen += actlen; 1929 1930 if (actlen < sumlen) { 1931 /* short transfer */ 1932 sc->sc_transfer.data_rem = 0; 1933 } 1934 case USB_ST_SETUP: 1935 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1936 max_bulk, sc->sc_transfer.data_rem); 1937 1938 if (sc->sc_transfer.data_rem == 0) { 1939 umass_cbi_start_status(sc); 1940 break; 1941 } 1942 if (max_bulk > sc->sc_transfer.data_rem) { 1943 max_bulk = sc->sc_transfer.data_rem; 1944 } 1945 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1946 1947 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1948 max_bulk); 1949 1950 usbd_transfer_submit(xfer); 1951 break; 1952 1953 default: /* Error */ 1954 if ((error == USB_ERR_CANCELLED) || 1955 (sc->sc_transfer.callback != &umass_cam_cb)) { 1956 umass_tr_error(xfer, error); 1957 } else { 1958 umass_transfer_start(sc, UMASS_T_CBI_DATA_WR_CS); 1959 } 1960 break; 1961 } 1962 } 1963 1964 static void 1965 umass_t_cbi_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1966 { 1967 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1968 UMASS_T_CBI_DATA_WRITE, error); 1969 } 1970 1971 static void 1972 umass_t_cbi_status_callback(struct usb_xfer *xfer, usb_error_t error) 1973 { 1974 struct umass_softc *sc = usbd_xfer_softc(xfer); 1975 union ccb *ccb = sc->sc_transfer.ccb; 1976 struct usb_page_cache *pc; 1977 uint32_t residue; 1978 uint8_t status; 1979 int actlen; 1980 1981 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1982 1983 switch (USB_GET_STATE(xfer)) { 1984 case USB_ST_TRANSFERRED: 1985 1986 if (actlen < (int)sizeof(sc->sbl)) { 1987 goto tr_setup; 1988 } 1989 pc = usbd_xfer_get_frame(xfer, 0); 1990 usbd_copy_out(pc, 0, &sc->sbl, sizeof(sc->sbl)); 1991 1992 residue = (sc->sc_transfer.data_len - 1993 sc->sc_transfer.actlen); 1994 1995 /* dissect the information in the buffer */ 1996 1997 if (sc->sc_proto & UMASS_PROTO_UFI) { 1998 /* 1999 * Section 3.4.3.1.3 specifies that the UFI command 2000 * protocol returns an ASC and ASCQ in the interrupt 2001 * data block. 2002 */ 2003 2004 DPRINTF(sc, UDMASS_CBI, "UFI CCI, ASC = 0x%02x, " 2005 "ASCQ = 0x%02x\n", sc->sbl.ufi.asc, 2006 sc->sbl.ufi.ascq); 2007 2008 status = (((sc->sbl.ufi.asc == 0) && 2009 (sc->sbl.ufi.ascq == 0)) ? 2010 STATUS_CMD_OK : STATUS_CMD_FAILED); 2011 2012 sc->sc_transfer.ccb = NULL; 2013 2014 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2015 2016 (sc->sc_transfer.callback) 2017 (sc, ccb, residue, status); 2018 2019 break; 2020 2021 } else { 2022 /* Command Interrupt Data Block */ 2023 2024 DPRINTF(sc, UDMASS_CBI, "type=0x%02x, value=0x%02x\n", 2025 sc->sbl.common.type, sc->sbl.common.value); 2026 2027 if (sc->sbl.common.type == IDB_TYPE_CCI) { 2028 status = (sc->sbl.common.value & IDB_VALUE_STATUS_MASK); 2029 2030 status = ((status == IDB_VALUE_PASS) ? STATUS_CMD_OK : 2031 (status == IDB_VALUE_FAIL) ? STATUS_CMD_FAILED : 2032 (status == IDB_VALUE_PERSISTENT) ? STATUS_CMD_FAILED : 2033 STATUS_WIRE_FAILED); 2034 2035 sc->sc_transfer.ccb = NULL; 2036 2037 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2038 2039 (sc->sc_transfer.callback) 2040 (sc, ccb, residue, status); 2041 2042 break; 2043 } 2044 } 2045 2046 /* fallthrough */ 2047 2048 case USB_ST_SETUP: 2049 tr_setup: 2050 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 2051 usbd_transfer_submit(xfer); 2052 break; 2053 2054 default: /* Error */ 2055 DPRINTF(sc, UDMASS_CBI, "Failed to read CSW: %s\n", 2056 usbd_errstr(error)); 2057 umass_tr_error(xfer, error); 2058 break; 2059 } 2060 } 2061 2062 /* 2063 * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI)) 2064 */ 2065 2066 static int 2067 umass_cam_attach_sim(struct umass_softc *sc) 2068 { 2069 struct cam_devq *devq; /* Per device Queue */ 2070 cam_status status; 2071 2072 /* 2073 * A HBA is attached to the CAM layer. 2074 * 2075 * The CAM layer will then after a while start probing for devices on 2076 * the bus. The number of SIMs is limited to one. 2077 */ 2078 2079 devq = cam_simq_alloc(1 /* maximum openings */ ); 2080 if (devq == NULL) { 2081 return (ENOMEM); 2082 } 2083 sc->sc_sim = cam_sim_alloc 2084 (&umass_cam_action, &umass_cam_poll, 2085 DEVNAME_SIM, 2086 sc /* priv */ , 2087 sc->sc_unit /* unit number */ , 2088 &sc->sc_mtx /* mutex */ , 2089 1 /* maximum device openings */ , 2090 0 /* maximum tagged device openings */ , 2091 devq); 2092 2093 if (sc->sc_sim == NULL) { 2094 cam_simq_free(devq); 2095 return (ENOMEM); 2096 } 2097 2098 mtx_lock(&sc->sc_mtx); 2099 status = xpt_bus_register(sc->sc_sim, sc->sc_dev, sc->sc_unit); 2100 if (status != CAM_SUCCESS) { 2101 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2102 mtx_unlock(&sc->sc_mtx); 2103 printf("%s: xpt_bus_register failed with status %#x\n", 2104 __func__, status); 2105 return (ENOMEM); 2106 } 2107 mtx_unlock(&sc->sc_mtx); 2108 2109 return (0); 2110 } 2111 2112 static void 2113 umass_cam_attach(struct umass_softc *sc) 2114 { 2115 #ifndef USB_DEBUG 2116 if (bootverbose) 2117 #endif 2118 printf("%s:%d:%d: Attached to scbus%d\n", 2119 sc->sc_name, cam_sim_path(sc->sc_sim), 2120 sc->sc_unit, cam_sim_path(sc->sc_sim)); 2121 } 2122 2123 /* umass_cam_detach 2124 * detach from the CAM layer 2125 */ 2126 2127 static void 2128 umass_cam_detach_sim(struct umass_softc *sc) 2129 { 2130 int error; 2131 2132 if (sc->sc_sim != NULL) { 2133 error = xpt_bus_deregister(cam_sim_path(sc->sc_sim)); 2134 if (error == 0) { 2135 /* accessing the softc is not possible after this */ 2136 sc->sc_sim->softc = NULL; 2137 DPRINTF(sc, UDMASS_SCSI, "%s: %s:%d:%d caling " 2138 "cam_sim_free sim %p refc %u mtx %p\n", 2139 __func__, sc->sc_name, cam_sim_path(sc->sc_sim), 2140 sc->sc_unit, sc->sc_sim, 2141 sc->sc_sim->refcount, sc->sc_sim->mtx); 2142 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2143 } else { 2144 panic("%s: %s: CAM layer is busy: errno %d\n", 2145 __func__, sc->sc_name, error); 2146 } 2147 sc->sc_sim = NULL; 2148 } 2149 } 2150 2151 /* umass_cam_action 2152 * CAM requests for action come through here 2153 */ 2154 2155 static void 2156 umass_cam_action(struct cam_sim *sim, union ccb *ccb) 2157 { 2158 struct umass_softc *sc = cam_sim_softc(sim); 2159 2160 if (sc == NULL) { 2161 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2162 xpt_done(ccb); 2163 return; 2164 } 2165 2166 /* Perform the requested action */ 2167 switch (ccb->ccb_h.func_code) { 2168 case XPT_SCSI_IO: 2169 { 2170 uint8_t *cmd; 2171 uint8_t dir; 2172 2173 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2174 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2175 } else { 2176 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2177 } 2178 2179 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2180 "cmd: 0x%02x, flags: 0x%02x, " 2181 "%db cmd/%db data/%db sense\n", 2182 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2183 (uintmax_t)ccb->ccb_h.target_lun, cmd[0], 2184 ccb->ccb_h.flags & CAM_DIR_MASK, ccb->csio.cdb_len, 2185 ccb->csio.dxfer_len, ccb->csio.sense_len); 2186 2187 if (sc->sc_transfer.ccb) { 2188 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2189 "I/O in progress, deferring\n", 2190 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2191 (uintmax_t)ccb->ccb_h.target_lun); 2192 ccb->ccb_h.status = CAM_SCSI_BUSY; 2193 xpt_done(ccb); 2194 goto done; 2195 } 2196 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 2197 case CAM_DIR_IN: 2198 dir = DIR_IN; 2199 break; 2200 case CAM_DIR_OUT: 2201 dir = DIR_OUT; 2202 DIF(UDMASS_SCSI, 2203 umass_dump_buffer(sc, ccb->csio.data_ptr, 2204 ccb->csio.dxfer_len, 48)); 2205 break; 2206 default: 2207 dir = DIR_NONE; 2208 } 2209 2210 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED; 2211 2212 /* 2213 * sc->sc_transform will convert the command to the 2214 * command format needed by the specific command set 2215 * and return the converted command in 2216 * "sc->sc_transfer.cmd_data" 2217 */ 2218 if (umass_std_transform(sc, ccb, cmd, ccb->csio.cdb_len)) { 2219 if (sc->sc_transfer.cmd_data[0] == INQUIRY) { 2220 const char *pserial; 2221 2222 pserial = usb_get_serial(sc->sc_udev); 2223 2224 /* 2225 * Umass devices don't generally report their serial numbers 2226 * in the usual SCSI way. Emulate it here. 2227 */ 2228 if ((sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2229 (sc->sc_transfer.cmd_data[2] == SVPD_UNIT_SERIAL_NUMBER) && 2230 (pserial[0] != '\0')) { 2231 struct scsi_vpd_unit_serial_number *vpd_serial; 2232 2233 vpd_serial = (struct scsi_vpd_unit_serial_number *)ccb->csio.data_ptr; 2234 vpd_serial->length = strlen(pserial); 2235 if (vpd_serial->length > sizeof(vpd_serial->serial_num)) 2236 vpd_serial->length = sizeof(vpd_serial->serial_num); 2237 memcpy(vpd_serial->serial_num, pserial, vpd_serial->length); 2238 ccb->csio.scsi_status = SCSI_STATUS_OK; 2239 ccb->ccb_h.status = CAM_REQ_CMP; 2240 xpt_done(ccb); 2241 goto done; 2242 } 2243 2244 /* 2245 * Handle EVPD inquiry for broken devices first 2246 * NO_INQUIRY also implies NO_INQUIRY_EVPD 2247 */ 2248 if ((sc->sc_quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) && 2249 (sc->sc_transfer.cmd_data[1] & SI_EVPD)) { 2250 scsi_set_sense_data(&ccb->csio.sense_data, 2251 /*sense_format*/ SSD_TYPE_NONE, 2252 /*current_error*/ 1, 2253 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST, 2254 /*asc*/ 0x24, 2255 /*ascq*/ 0x00, 2256 /*extra args*/ SSD_ELEM_NONE); 2257 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2258 ccb->ccb_h.status = 2259 CAM_SCSI_STATUS_ERROR | 2260 CAM_AUTOSNS_VALID | 2261 CAM_DEV_QFRZN; 2262 xpt_freeze_devq(ccb->ccb_h.path, 1); 2263 xpt_done(ccb); 2264 goto done; 2265 } 2266 /* 2267 * Return fake inquiry data for 2268 * broken devices 2269 */ 2270 if (sc->sc_quirks & NO_INQUIRY) { 2271 memcpy(ccb->csio.data_ptr, &fake_inq_data, 2272 sizeof(fake_inq_data)); 2273 ccb->csio.scsi_status = SCSI_STATUS_OK; 2274 ccb->ccb_h.status = CAM_REQ_CMP; 2275 xpt_done(ccb); 2276 goto done; 2277 } 2278 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2279 ccb->csio.dxfer_len = SHORT_INQUIRY_LENGTH; 2280 } 2281 } else if (sc->sc_transfer.cmd_data[0] == PREVENT_ALLOW) { 2282 if (sc->sc_quirks & NO_PREVENT_ALLOW) { 2283 ccb->csio.scsi_status = SCSI_STATUS_OK; 2284 ccb->ccb_h.status = CAM_REQ_CMP; 2285 xpt_done(ccb); 2286 goto done; 2287 } 2288 } else if (sc->sc_transfer.cmd_data[0] == SYNCHRONIZE_CACHE) { 2289 if (sc->sc_quirks & NO_SYNCHRONIZE_CACHE) { 2290 ccb->csio.scsi_status = SCSI_STATUS_OK; 2291 ccb->ccb_h.status = CAM_REQ_CMP; 2292 xpt_done(ccb); 2293 goto done; 2294 } 2295 } else if (sc->sc_transfer.cmd_data[0] == START_STOP_UNIT) { 2296 if (sc->sc_quirks & NO_START_STOP) { 2297 ccb->csio.scsi_status = SCSI_STATUS_OK; 2298 ccb->ccb_h.status = CAM_REQ_CMP; 2299 xpt_done(ccb); 2300 goto done; 2301 } 2302 } 2303 umass_command_start(sc, dir, ccb->csio.data_ptr, 2304 ccb->csio.dxfer_len, 2305 ccb->ccb_h.timeout, 2306 &umass_cam_cb, ccb); 2307 } 2308 break; 2309 } 2310 case XPT_PATH_INQ: 2311 { 2312 struct ccb_pathinq *cpi = &ccb->cpi; 2313 2314 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_PATH_INQ:.\n", 2315 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2316 (uintmax_t)ccb->ccb_h.target_lun); 2317 2318 /* host specific information */ 2319 cpi->version_num = 1; 2320 cpi->hba_inquiry = 0; 2321 cpi->target_sprt = 0; 2322 cpi->hba_misc = PIM_NO_6_BYTE; 2323 cpi->hba_eng_cnt = 0; 2324 cpi->max_target = UMASS_SCSIID_MAX; /* one target */ 2325 cpi->initiator_id = UMASS_SCSIID_HOST; 2326 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2327 strlcpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN); 2328 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2329 cpi->unit_number = cam_sim_unit(sim); 2330 cpi->bus_id = sc->sc_unit; 2331 cpi->protocol = PROTO_SCSI; 2332 cpi->protocol_version = SCSI_REV_2; 2333 cpi->transport = XPORT_USB; 2334 cpi->transport_version = 0; 2335 2336 if (sc == NULL) { 2337 cpi->base_transfer_speed = 0; 2338 cpi->max_lun = 0; 2339 } else { 2340 if (sc->sc_quirks & FLOPPY_SPEED) { 2341 cpi->base_transfer_speed = 2342 UMASS_FLOPPY_TRANSFER_SPEED; 2343 } else { 2344 switch (usbd_get_speed(sc->sc_udev)) { 2345 case USB_SPEED_SUPER: 2346 cpi->base_transfer_speed = 2347 UMASS_SUPER_TRANSFER_SPEED; 2348 cpi->maxio = maxphys; 2349 break; 2350 case USB_SPEED_HIGH: 2351 cpi->base_transfer_speed = 2352 UMASS_HIGH_TRANSFER_SPEED; 2353 break; 2354 default: 2355 cpi->base_transfer_speed = 2356 UMASS_FULL_TRANSFER_SPEED; 2357 break; 2358 } 2359 } 2360 cpi->max_lun = sc->sc_maxlun; 2361 } 2362 2363 cpi->ccb_h.status = CAM_REQ_CMP; 2364 xpt_done(ccb); 2365 break; 2366 } 2367 case XPT_RESET_DEV: 2368 { 2369 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_RESET_DEV:.\n", 2370 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2371 (uintmax_t)ccb->ccb_h.target_lun); 2372 2373 umass_reset(sc); 2374 2375 ccb->ccb_h.status = CAM_REQ_CMP; 2376 xpt_done(ccb); 2377 break; 2378 } 2379 case XPT_GET_TRAN_SETTINGS: 2380 { 2381 struct ccb_trans_settings *cts = &ccb->cts; 2382 2383 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_GET_TRAN_SETTINGS:.\n", 2384 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2385 (uintmax_t)ccb->ccb_h.target_lun); 2386 2387 cts->protocol = PROTO_SCSI; 2388 cts->protocol_version = SCSI_REV_2; 2389 cts->transport = XPORT_USB; 2390 cts->transport_version = 0; 2391 cts->xport_specific.valid = 0; 2392 2393 ccb->ccb_h.status = CAM_REQ_CMP; 2394 xpt_done(ccb); 2395 break; 2396 } 2397 case XPT_SET_TRAN_SETTINGS: 2398 { 2399 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SET_TRAN_SETTINGS:.\n", 2400 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2401 (uintmax_t)ccb->ccb_h.target_lun); 2402 2403 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2404 xpt_done(ccb); 2405 break; 2406 } 2407 case XPT_CALC_GEOMETRY: 2408 { 2409 cam_calc_geometry(&ccb->ccg, /* extended */ 1); 2410 xpt_done(ccb); 2411 break; 2412 } 2413 case XPT_NOOP: 2414 { 2415 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_NOOP:.\n", 2416 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2417 (uintmax_t)ccb->ccb_h.target_lun); 2418 2419 ccb->ccb_h.status = CAM_REQ_CMP; 2420 xpt_done(ccb); 2421 break; 2422 } 2423 default: 2424 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:func_code 0x%04x: " 2425 "Not implemented\n", 2426 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2427 (uintmax_t)ccb->ccb_h.target_lun, ccb->ccb_h.func_code); 2428 2429 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2430 xpt_done(ccb); 2431 break; 2432 } 2433 2434 done: 2435 return; 2436 } 2437 2438 static void 2439 umass_cam_poll(struct cam_sim *sim) 2440 { 2441 struct umass_softc *sc = cam_sim_softc(sim); 2442 2443 if (sc == NULL) 2444 return; 2445 2446 DPRINTF(sc, UDMASS_SCSI, "CAM poll\n"); 2447 2448 usbd_transfer_poll(sc->sc_xfer, UMASS_T_MAX); 2449 } 2450 2451 /* umass_cam_cb 2452 * finalise a completed CAM command 2453 */ 2454 2455 static void 2456 umass_cam_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2457 uint8_t status) 2458 { 2459 ccb->csio.resid = residue; 2460 2461 switch (status) { 2462 case STATUS_CMD_OK: 2463 ccb->ccb_h.status = CAM_REQ_CMP; 2464 if ((sc->sc_quirks & READ_CAPACITY_OFFBY1) && 2465 (ccb->ccb_h.func_code == XPT_SCSI_IO) && 2466 (ccb->csio.cdb_io.cdb_bytes[0] == READ_CAPACITY)) { 2467 struct scsi_read_capacity_data *rcap; 2468 uint32_t maxsector; 2469 2470 rcap = (void *)(ccb->csio.data_ptr); 2471 maxsector = scsi_4btoul(rcap->addr) - 1; 2472 scsi_ulto4b(maxsector, rcap->addr); 2473 } 2474 /* 2475 * We have to add SVPD_UNIT_SERIAL_NUMBER to the list 2476 * of pages supported by the device - otherwise, CAM 2477 * will never ask us for the serial number if the 2478 * device cannot handle that by itself. 2479 */ 2480 if (ccb->ccb_h.func_code == XPT_SCSI_IO && 2481 sc->sc_transfer.cmd_data[0] == INQUIRY && 2482 (sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2483 sc->sc_transfer.cmd_data[2] == SVPD_SUPPORTED_PAGE_LIST && 2484 (usb_get_serial(sc->sc_udev)[0] != '\0')) { 2485 struct ccb_scsiio *csio; 2486 struct scsi_vpd_supported_page_list *page_list; 2487 2488 csio = &ccb->csio; 2489 page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; 2490 if (page_list->length + 1 < SVPD_SUPPORTED_PAGES_SIZE) { 2491 page_list->list[page_list->length] = SVPD_UNIT_SERIAL_NUMBER; 2492 page_list->length++; 2493 } 2494 } 2495 xpt_done(ccb); 2496 break; 2497 2498 case STATUS_CMD_UNKNOWN: 2499 case STATUS_CMD_FAILED: 2500 2501 /* fetch sense data */ 2502 2503 /* the rest of the command was filled in at attach */ 2504 sc->cam_scsi_sense.length = ccb->csio.sense_len; 2505 2506 DPRINTF(sc, UDMASS_SCSI, "Fetching %d bytes of " 2507 "sense data\n", ccb->csio.sense_len); 2508 2509 if (umass_std_transform(sc, ccb, &sc->cam_scsi_sense.opcode, 2510 sizeof(sc->cam_scsi_sense))) { 2511 if ((sc->sc_quirks & FORCE_SHORT_INQUIRY) && 2512 (sc->sc_transfer.cmd_data[0] == INQUIRY)) { 2513 ccb->csio.sense_len = SHORT_INQUIRY_LENGTH; 2514 } 2515 umass_command_start(sc, DIR_IN, &ccb->csio.sense_data.error_code, 2516 ccb->csio.sense_len, ccb->ccb_h.timeout, 2517 &umass_cam_sense_cb, ccb); 2518 } 2519 break; 2520 2521 default: 2522 /* 2523 * The wire protocol failed and will hopefully have 2524 * recovered. We return an error to CAM and let CAM 2525 * retry the command if necessary. 2526 */ 2527 xpt_freeze_devq(ccb->ccb_h.path, 1); 2528 ccb->ccb_h.status = CAM_REQ_CMP_ERR | CAM_DEV_QFRZN; 2529 xpt_done(ccb); 2530 break; 2531 } 2532 } 2533 2534 /* 2535 * Finalise a completed autosense operation 2536 */ 2537 static void 2538 umass_cam_sense_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2539 uint8_t status) 2540 { 2541 uint8_t *cmd; 2542 2543 switch (status) { 2544 case STATUS_CMD_OK: 2545 case STATUS_CMD_UNKNOWN: 2546 case STATUS_CMD_FAILED: { 2547 int key, sense_len; 2548 2549 ccb->csio.sense_resid = residue; 2550 sense_len = ccb->csio.sense_len - ccb->csio.sense_resid; 2551 key = scsi_get_sense_key(&ccb->csio.sense_data, sense_len, 2552 /*show_errors*/ 1); 2553 2554 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2555 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2556 } else { 2557 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2558 } 2559 2560 /* 2561 * Getting sense data always succeeds (apart from wire 2562 * failures): 2563 */ 2564 if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2565 (cmd[0] == INQUIRY) && 2566 (key == SSD_KEY_UNIT_ATTENTION)) { 2567 /* 2568 * Ignore unit attention errors in the case where 2569 * the Unit Attention state is not cleared on 2570 * REQUEST SENSE. They will appear again at the next 2571 * command. 2572 */ 2573 ccb->ccb_h.status = CAM_REQ_CMP; 2574 } else if (key == SSD_KEY_NO_SENSE) { 2575 /* 2576 * No problem after all (in the case of CBI without 2577 * CCI) 2578 */ 2579 ccb->ccb_h.status = CAM_REQ_CMP; 2580 } else if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2581 (cmd[0] == READ_CAPACITY) && 2582 (key == SSD_KEY_UNIT_ATTENTION)) { 2583 /* 2584 * Some devices do not clear the unit attention error 2585 * on request sense. We insert a test unit ready 2586 * command to make sure we clear the unit attention 2587 * condition, then allow the retry to proceed as 2588 * usual. 2589 */ 2590 2591 xpt_freeze_devq(ccb->ccb_h.path, 1); 2592 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2593 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2594 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2595 2596 #if 0 2597 DELAY(300000); 2598 #endif 2599 DPRINTF(sc, UDMASS_SCSI, "Doing a sneaky" 2600 "TEST_UNIT_READY\n"); 2601 2602 /* the rest of the command was filled in at attach */ 2603 2604 if ((sc->sc_transform)(sc, 2605 &sc->cam_scsi_test_unit_ready.opcode, 2606 sizeof(sc->cam_scsi_test_unit_ready)) == 1) { 2607 umass_command_start(sc, DIR_NONE, NULL, 0, 2608 ccb->ccb_h.timeout, 2609 &umass_cam_quirk_cb, ccb); 2610 break; 2611 } 2612 } else { 2613 xpt_freeze_devq(ccb->ccb_h.path, 1); 2614 if (key >= 0) { 2615 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2616 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2617 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2618 } else 2619 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL 2620 | CAM_DEV_QFRZN; 2621 } 2622 xpt_done(ccb); 2623 break; 2624 } 2625 default: 2626 DPRINTF(sc, UDMASS_SCSI, "Autosense failed, " 2627 "status %d\n", status); 2628 xpt_freeze_devq(ccb->ccb_h.path, 1); 2629 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL | CAM_DEV_QFRZN; 2630 xpt_done(ccb); 2631 } 2632 } 2633 2634 /* 2635 * This completion code just handles the fact that we sent a test-unit-ready 2636 * after having previously failed a READ CAPACITY with CHECK_COND. The CCB 2637 * status for CAM is already set earlier. 2638 */ 2639 static void 2640 umass_cam_quirk_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2641 uint8_t status) 2642 { 2643 DPRINTF(sc, UDMASS_SCSI, "Test unit ready " 2644 "returned status %d\n", status); 2645 2646 xpt_done(ccb); 2647 } 2648 2649 /* 2650 * SCSI specific functions 2651 */ 2652 2653 static uint8_t 2654 umass_scsi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2655 uint8_t cmd_len) 2656 { 2657 if ((cmd_len == 0) || 2658 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2659 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2660 "length: %d bytes\n", cmd_len); 2661 return (0); /* failure */ 2662 } 2663 sc->sc_transfer.cmd_len = cmd_len; 2664 2665 switch (cmd_ptr[0]) { 2666 case TEST_UNIT_READY: 2667 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2668 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2669 "to START_UNIT\n"); 2670 memset(sc->sc_transfer.cmd_data, 0, cmd_len); 2671 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2672 sc->sc_transfer.cmd_data[4] = SSS_START; 2673 return (1); 2674 } 2675 break; 2676 2677 case INQUIRY: 2678 /* 2679 * some drives wedge when asked for full inquiry 2680 * information. 2681 */ 2682 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2683 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2684 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2685 return (1); 2686 } 2687 break; 2688 } 2689 2690 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2691 return (1); 2692 } 2693 2694 static uint8_t 2695 umass_rbc_transform(struct umass_softc *sc, uint8_t *cmd_ptr, uint8_t cmd_len) 2696 { 2697 if ((cmd_len == 0) || 2698 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2699 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2700 "length: %d bytes\n", cmd_len); 2701 return (0); /* failure */ 2702 } 2703 switch (cmd_ptr[0]) { 2704 /* these commands are defined in RBC: */ 2705 case READ_10: 2706 case READ_CAPACITY: 2707 case START_STOP_UNIT: 2708 case SYNCHRONIZE_CACHE: 2709 case WRITE_10: 2710 case VERIFY_10: 2711 case INQUIRY: 2712 case MODE_SELECT_10: 2713 case MODE_SENSE_10: 2714 case TEST_UNIT_READY: 2715 case WRITE_BUFFER: 2716 /* 2717 * The following commands are not listed in my copy of the 2718 * RBC specs. CAM however seems to want those, and at least 2719 * the Sony DSC device appears to support those as well 2720 */ 2721 case REQUEST_SENSE: 2722 case PREVENT_ALLOW: 2723 2724 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2725 2726 if ((sc->sc_quirks & RBC_PAD_TO_12) && (cmd_len < 12)) { 2727 memset(sc->sc_transfer.cmd_data + cmd_len, 2728 0, 12 - cmd_len); 2729 cmd_len = 12; 2730 } 2731 sc->sc_transfer.cmd_len = cmd_len; 2732 return (1); /* success */ 2733 2734 /* All other commands are not legal in RBC */ 2735 default: 2736 DPRINTF(sc, UDMASS_SCSI, "Unsupported RBC " 2737 "command 0x%02x\n", cmd_ptr[0]); 2738 return (0); /* failure */ 2739 } 2740 } 2741 2742 static uint8_t 2743 umass_ufi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2744 uint8_t cmd_len) 2745 { 2746 if ((cmd_len == 0) || 2747 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2748 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2749 "length: %d bytes\n", cmd_len); 2750 return (0); /* failure */ 2751 } 2752 /* An UFI command is always 12 bytes in length */ 2753 sc->sc_transfer.cmd_len = UFI_COMMAND_LENGTH; 2754 2755 /* Zero the command data */ 2756 memset(sc->sc_transfer.cmd_data, 0, UFI_COMMAND_LENGTH); 2757 2758 switch (cmd_ptr[0]) { 2759 /* 2760 * Commands of which the format has been verified. They 2761 * should work. Copy the command into the (zeroed out) 2762 * destination buffer. 2763 */ 2764 case TEST_UNIT_READY: 2765 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2766 /* 2767 * Some devices do not support this command. Start 2768 * Stop Unit should give the same results 2769 */ 2770 DPRINTF(sc, UDMASS_UFI, "Converted TEST_UNIT_READY " 2771 "to START_UNIT\n"); 2772 2773 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2774 sc->sc_transfer.cmd_data[4] = SSS_START; 2775 return (1); 2776 } 2777 break; 2778 2779 case REZERO_UNIT: 2780 case REQUEST_SENSE: 2781 case FORMAT_UNIT: 2782 case INQUIRY: 2783 case START_STOP_UNIT: 2784 case SEND_DIAGNOSTIC: 2785 case PREVENT_ALLOW: 2786 case READ_CAPACITY: 2787 case READ_10: 2788 case WRITE_10: 2789 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2790 case WRITE_AND_VERIFY: 2791 case VERIFY: 2792 case MODE_SELECT_10: 2793 case MODE_SENSE_10: 2794 case READ_12: 2795 case WRITE_12: 2796 case READ_FORMAT_CAPACITIES: 2797 break; 2798 2799 /* 2800 * SYNCHRONIZE_CACHE isn't supported by UFI, nor should it be 2801 * required for UFI devices, so it is appropriate to fake 2802 * success. 2803 */ 2804 case SYNCHRONIZE_CACHE: 2805 return (2); 2806 2807 default: 2808 DPRINTF(sc, UDMASS_SCSI, "Unsupported UFI " 2809 "command 0x%02x\n", cmd_ptr[0]); 2810 return (0); /* failure */ 2811 } 2812 2813 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2814 return (1); /* success */ 2815 } 2816 2817 /* 2818 * 8070i (ATAPI) specific functions 2819 */ 2820 static uint8_t 2821 umass_atapi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2822 uint8_t cmd_len) 2823 { 2824 if ((cmd_len == 0) || 2825 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2826 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2827 "length: %d bytes\n", cmd_len); 2828 return (0); /* failure */ 2829 } 2830 /* An ATAPI command is always 12 bytes in length. */ 2831 sc->sc_transfer.cmd_len = ATAPI_COMMAND_LENGTH; 2832 2833 /* Zero the command data */ 2834 memset(sc->sc_transfer.cmd_data, 0, ATAPI_COMMAND_LENGTH); 2835 2836 switch (cmd_ptr[0]) { 2837 /* 2838 * Commands of which the format has been verified. They 2839 * should work. Copy the command into the destination 2840 * buffer. 2841 */ 2842 case INQUIRY: 2843 /* 2844 * some drives wedge when asked for full inquiry 2845 * information. 2846 */ 2847 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2848 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2849 2850 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2851 return (1); 2852 } 2853 break; 2854 2855 case TEST_UNIT_READY: 2856 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2857 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2858 "to START_UNIT\n"); 2859 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2860 sc->sc_transfer.cmd_data[4] = SSS_START; 2861 return (1); 2862 } 2863 break; 2864 2865 case REZERO_UNIT: 2866 case REQUEST_SENSE: 2867 case START_STOP_UNIT: 2868 case SEND_DIAGNOSTIC: 2869 case PREVENT_ALLOW: 2870 case READ_CAPACITY: 2871 case READ_10: 2872 case WRITE_10: 2873 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2874 case SYNCHRONIZE_CACHE: 2875 case MODE_SELECT_10: 2876 case MODE_SENSE_10: 2877 case READ_BUFFER: 2878 case 0x42: /* READ_SUBCHANNEL */ 2879 case 0x43: /* READ_TOC */ 2880 case 0x44: /* READ_HEADER */ 2881 case 0x47: /* PLAY_MSF (Play Minute/Second/Frame) */ 2882 case 0x48: /* PLAY_TRACK */ 2883 case 0x49: /* PLAY_TRACK_REL */ 2884 case 0x4b: /* PAUSE */ 2885 case 0x51: /* READ_DISK_INFO */ 2886 case 0x52: /* READ_TRACK_INFO */ 2887 case 0x54: /* SEND_OPC */ 2888 case 0x59: /* READ_MASTER_CUE */ 2889 case 0x5b: /* CLOSE_TR_SESSION */ 2890 case 0x5c: /* READ_BUFFER_CAP */ 2891 case 0x5d: /* SEND_CUE_SHEET */ 2892 case 0xa1: /* BLANK */ 2893 case 0xa5: /* PLAY_12 */ 2894 case 0xa6: /* EXCHANGE_MEDIUM */ 2895 case 0xad: /* READ_DVD_STRUCTURE */ 2896 case 0xbb: /* SET_CD_SPEED */ 2897 case 0xe5: /* READ_TRACK_INFO_PHILIPS */ 2898 break; 2899 2900 case READ_12: 2901 case WRITE_12: 2902 default: 2903 DPRINTF(sc, UDMASS_SCSI, "Unsupported ATAPI " 2904 "command 0x%02x - trying anyway\n", 2905 cmd_ptr[0]); 2906 break; 2907 } 2908 2909 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2910 return (1); /* success */ 2911 } 2912 2913 static uint8_t 2914 umass_no_transform(struct umass_softc *sc, uint8_t *cmd, 2915 uint8_t cmdlen) 2916 { 2917 return (0); /* failure */ 2918 } 2919 2920 static uint8_t 2921 umass_std_transform(struct umass_softc *sc, union ccb *ccb, 2922 uint8_t *cmd, uint8_t cmdlen) 2923 { 2924 uint8_t retval; 2925 2926 retval = (sc->sc_transform) (sc, cmd, cmdlen); 2927 2928 if (retval == 2) { 2929 ccb->ccb_h.status = CAM_REQ_CMP; 2930 xpt_done(ccb); 2931 return (0); 2932 } else if (retval == 0) { 2933 xpt_freeze_devq(ccb->ccb_h.path, 1); 2934 ccb->ccb_h.status = CAM_REQ_INVALID | CAM_DEV_QFRZN; 2935 xpt_done(ccb); 2936 return (0); 2937 } 2938 /* Command should be executed */ 2939 return (1); 2940 } 2941 2942 #ifdef USB_DEBUG 2943 static void 2944 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2945 { 2946 uint8_t *c = cbw->CBWCDB; 2947 2948 uint32_t dlen = UGETDW(cbw->dCBWDataTransferLength); 2949 uint32_t tag = UGETDW(cbw->dCBWTag); 2950 2951 uint8_t clen = cbw->bCDBLength; 2952 uint8_t flags = cbw->bCBWFlags; 2953 uint8_t lun = cbw->bCBWLUN; 2954 2955 DPRINTF(sc, UDMASS_BBB, "CBW %d: cmd = %db " 2956 "(0x%02x%02x%02x%02x%02x%02x%s), " 2957 "data = %db, lun = %d, dir = %s\n", 2958 tag, clen, 2959 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6 ? "..." : ""), 2960 dlen, lun, (flags == CBWFLAGS_IN ? "in" : 2961 (flags == CBWFLAGS_OUT ? "out" : "<invalid>"))); 2962 } 2963 2964 static void 2965 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2966 { 2967 uint32_t sig = UGETDW(csw->dCSWSignature); 2968 uint32_t tag = UGETDW(csw->dCSWTag); 2969 uint32_t res = UGETDW(csw->dCSWDataResidue); 2970 uint8_t status = csw->bCSWStatus; 2971 2972 DPRINTF(sc, UDMASS_BBB, "CSW %d: sig = 0x%08x (%s), tag = 0x%08x, " 2973 "res = %d, status = 0x%02x (%s)\n", 2974 tag, sig, (sig == CSWSIGNATURE ? "valid" : "invalid"), 2975 tag, res, 2976 status, (status == CSWSTATUS_GOOD ? "good" : 2977 (status == CSWSTATUS_FAILED ? "failed" : 2978 (status == CSWSTATUS_PHASE ? "phase" : "<invalid>")))); 2979 } 2980 2981 static void 2982 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, uint8_t cmdlen) 2983 { 2984 uint8_t *c = cmd; 2985 uint8_t dir = sc->sc_transfer.dir; 2986 2987 DPRINTF(sc, UDMASS_BBB, "cmd = %db " 2988 "(0x%02x%02x%02x%02x%02x%02x%s), " 2989 "data = %db, dir = %s\n", 2990 cmdlen, 2991 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6 ? "..." : ""), 2992 sc->sc_transfer.data_len, 2993 (dir == DIR_IN ? "in" : 2994 (dir == DIR_OUT ? "out" : 2995 (dir == DIR_NONE ? "no data phase" : "<invalid>")))); 2996 } 2997 2998 static void 2999 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, uint32_t buflen, 3000 uint32_t printlen) 3001 { 3002 uint32_t i, j; 3003 char s1[40]; 3004 char s2[40]; 3005 char s3[5]; 3006 3007 s1[0] = '\0'; 3008 s3[0] = '\0'; 3009 3010 sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen); 3011 for (i = 0; (i < buflen) && (i < printlen); i++) { 3012 j = i % 16; 3013 if (j == 0 && i != 0) { 3014 DPRINTF(sc, UDMASS_GEN, "0x %s%s\n", 3015 s1, s2); 3016 s2[0] = '\0'; 3017 } 3018 sprintf(&s1[j * 2], "%02x", buffer[i] & 0xff); 3019 } 3020 if (buflen > printlen) 3021 sprintf(s3, " ..."); 3022 DPRINTF(sc, UDMASS_GEN, "0x %s%s%s\n", 3023 s1, s2, s3); 3024 } 3025 3026 #endif 3027