1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2010 Hans Petter Selasky. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 /* 29 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf 30 */ 31 32 #include <sys/param.h> 33 __FBSDID("$FreeBSD$"); 34 35 #include <sys/stdint.h> 36 #include <sys/stddef.h> 37 #include <sys/queue.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/linker_set.h> 42 #include <sys/module.h> 43 #include <sys/lock.h> 44 #include <sys/mutex.h> 45 #include <sys/condvar.h> 46 #include <sys/sysctl.h> 47 #include <sys/sx.h> 48 #include <sys/unistd.h> 49 #include <sys/callout.h> 50 #include <sys/malloc.h> 51 #include <sys/priv.h> 52 53 #include <dev/usb/usb.h> 54 #include <dev/usb/usbdi.h> 55 #include <dev/usb/usbdi_util.h> 56 #include <dev/usb/usbhid.h> 57 #include "usb_if.h" 58 59 #define USB_DEBUG_VAR g_mouse_debug 60 #include <dev/usb/usb_debug.h> 61 62 #include <dev/usb/gadget/g_mouse.h> 63 64 static SYSCTL_NODE(_hw_usb, OID_AUTO, g_mouse, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 65 "USB mouse gadget"); 66 67 #ifdef USB_DEBUG 68 static int g_mouse_debug = 0; 69 70 SYSCTL_INT(_hw_usb_g_mouse, OID_AUTO, debug, CTLFLAG_RWTUN, 71 &g_mouse_debug, 0, "Debug level"); 72 #endif 73 74 static int g_mouse_mode = 0; 75 76 SYSCTL_INT(_hw_usb_g_mouse, OID_AUTO, mode, CTLFLAG_RWTUN, 77 &g_mouse_mode, 0, "Mode selection"); 78 79 static int g_mouse_button_press_interval = 0; 80 81 SYSCTL_INT(_hw_usb_g_mouse, OID_AUTO, button_press_interval, CTLFLAG_RWTUN, 82 &g_mouse_button_press_interval, 0, "Mouse button update interval in milliseconds"); 83 84 static int g_mouse_cursor_update_interval = 1023; 85 86 SYSCTL_INT(_hw_usb_g_mouse, OID_AUTO, cursor_update_interval, CTLFLAG_RWTUN, 87 &g_mouse_cursor_update_interval, 0, "Mouse cursor update interval in milliseconds"); 88 89 static int g_mouse_cursor_radius = 128; 90 91 SYSCTL_INT(_hw_usb_g_mouse, OID_AUTO, cursor_radius, CTLFLAG_RWTUN, 92 &g_mouse_cursor_radius, 0, "Mouse cursor radius in pixels"); 93 94 struct g_mouse_data { 95 uint8_t buttons; 96 #define BUT_0 0x01 97 #define BUT_1 0x02 98 #define BUT_2 0x04 99 int8_t dx; 100 int8_t dy; 101 int8_t dz; 102 }; 103 104 enum { 105 G_MOUSE_INTR_DT, 106 G_MOUSE_N_TRANSFER, 107 }; 108 109 struct g_mouse_softc { 110 struct mtx sc_mtx; 111 struct usb_callout sc_button_press_callout; 112 struct usb_callout sc_cursor_update_callout; 113 struct g_mouse_data sc_data; 114 struct usb_xfer *sc_xfer[G_MOUSE_N_TRANSFER]; 115 116 int sc_mode; 117 int sc_radius; 118 int sc_last_x_state; 119 int sc_last_y_state; 120 int sc_curr_x_state; 121 int sc_curr_y_state; 122 int sc_tick; 123 124 uint8_t sc_do_cursor_update; 125 uint8_t sc_do_button_update; 126 }; 127 128 static device_probe_t g_mouse_probe; 129 static device_attach_t g_mouse_attach; 130 static device_detach_t g_mouse_detach; 131 static usb_handle_request_t g_mouse_handle_request; 132 static usb_callback_t g_mouse_intr_callback; 133 134 static device_method_t g_mouse_methods[] = { 135 /* USB interface */ 136 DEVMETHOD(usb_handle_request, g_mouse_handle_request), 137 138 /* Device interface */ 139 DEVMETHOD(device_probe, g_mouse_probe), 140 DEVMETHOD(device_attach, g_mouse_attach), 141 DEVMETHOD(device_detach, g_mouse_detach), 142 143 DEVMETHOD_END 144 }; 145 146 static driver_t g_mouse_driver = { 147 .name = "g_mouse", 148 .methods = g_mouse_methods, 149 .size = sizeof(struct g_mouse_softc), 150 }; 151 152 DRIVER_MODULE(g_mouse, uhub, g_mouse_driver, 0, 0); 153 MODULE_DEPEND(g_mouse, usb, 1, 1, 1); 154 155 static const struct usb_config g_mouse_config[G_MOUSE_N_TRANSFER] = { 156 [G_MOUSE_INTR_DT] = { 157 .type = UE_INTERRUPT, 158 .endpoint = UE_ADDR_ANY, 159 .direction = UE_DIR_IN, 160 .flags = {.ext_buffer = 1,.pipe_bof = 1,}, 161 .bufsize = sizeof(struct g_mouse_data), 162 .callback = &g_mouse_intr_callback, 163 .frames = 1, 164 .usb_mode = USB_MODE_DEVICE, 165 }, 166 }; 167 168 static void g_mouse_button_press_timeout(void *arg); 169 static void g_mouse_cursor_update_timeout(void *arg); 170 171 static void 172 g_mouse_button_press_timeout_reset(struct g_mouse_softc *sc) 173 { 174 int i = g_mouse_button_press_interval; 175 176 if (i <= 0) { 177 sc->sc_data.buttons = 0; 178 sc->sc_do_button_update = 0; 179 } else { 180 sc->sc_do_button_update = 1; 181 } 182 183 if ((i <= 0) || (i > 1023)) 184 i = 1023; 185 186 i = USB_MS_TO_TICKS(i); 187 188 usb_callout_reset(&sc->sc_button_press_callout, i, 189 &g_mouse_button_press_timeout, sc); 190 } 191 192 static void 193 g_mouse_cursor_update_timeout_reset(struct g_mouse_softc *sc) 194 { 195 int i = g_mouse_cursor_update_interval; 196 197 if (i <= 0) { 198 sc->sc_data.dx = 0; 199 sc->sc_data.dy = 0; 200 sc->sc_do_cursor_update = 0; 201 sc->sc_tick = 0; 202 } else { 203 sc->sc_do_cursor_update = 1; 204 } 205 206 if ((i <= 0) || (i > 1023)) 207 i = 1023; 208 209 i = USB_MS_TO_TICKS(i); 210 211 usb_callout_reset(&sc->sc_cursor_update_callout, i, 212 &g_mouse_cursor_update_timeout, sc); 213 } 214 215 static void 216 g_mouse_update_mode_radius(struct g_mouse_softc *sc) 217 { 218 sc->sc_mode = g_mouse_mode; 219 sc->sc_radius = g_mouse_cursor_radius; 220 221 if (sc->sc_radius < 0) 222 sc->sc_radius = 0; 223 else if (sc->sc_radius > 1023) 224 sc->sc_radius = 1023; 225 } 226 227 static void 228 g_mouse_button_press_timeout(void *arg) 229 { 230 struct g_mouse_softc *sc = arg; 231 232 g_mouse_update_mode_radius(sc); 233 234 DPRINTFN(11, "Timeout %p (button press)\n", sc->sc_xfer[G_MOUSE_INTR_DT]); 235 236 g_mouse_button_press_timeout_reset(sc); 237 238 usbd_transfer_start(sc->sc_xfer[G_MOUSE_INTR_DT]); 239 } 240 241 static void 242 g_mouse_cursor_update_timeout(void *arg) 243 { 244 struct g_mouse_softc *sc = arg; 245 246 g_mouse_update_mode_radius(sc); 247 248 DPRINTFN(11, "Timeout %p (cursor update)\n", sc->sc_xfer[G_MOUSE_INTR_DT]); 249 250 g_mouse_cursor_update_timeout_reset(sc); 251 252 usbd_transfer_start(sc->sc_xfer[G_MOUSE_INTR_DT]); 253 } 254 255 static int 256 g_mouse_probe(device_t dev) 257 { 258 struct usb_attach_arg *uaa = device_get_ivars(dev); 259 260 DPRINTFN(11, "\n"); 261 262 if (uaa->usb_mode != USB_MODE_DEVICE) 263 return (ENXIO); 264 265 if ((uaa->info.bInterfaceClass == UICLASS_HID) && 266 (uaa->info.bInterfaceSubClass == UISUBCLASS_BOOT) && 267 (uaa->info.bInterfaceProtocol == UIPROTO_MOUSE)) 268 return (0); 269 270 return (ENXIO); 271 } 272 273 static int 274 g_mouse_attach(device_t dev) 275 { 276 struct g_mouse_softc *sc = device_get_softc(dev); 277 struct usb_attach_arg *uaa = device_get_ivars(dev); 278 int error; 279 280 DPRINTFN(11, "\n"); 281 282 device_set_usb_desc(dev); 283 284 mtx_init(&sc->sc_mtx, "g_mouse", NULL, MTX_DEF); 285 286 usb_callout_init_mtx(&sc->sc_button_press_callout, &sc->sc_mtx, 0); 287 usb_callout_init_mtx(&sc->sc_cursor_update_callout, &sc->sc_mtx, 0); 288 289 sc->sc_mode = G_MOUSE_MODE_SILENT; 290 291 error = usbd_transfer_setup(uaa->device, 292 &uaa->info.bIfaceIndex, sc->sc_xfer, g_mouse_config, 293 G_MOUSE_N_TRANSFER, sc, &sc->sc_mtx); 294 295 if (error) { 296 DPRINTF("error=%s\n", usbd_errstr(error)); 297 goto detach; 298 } 299 300 mtx_lock(&sc->sc_mtx); 301 g_mouse_button_press_timeout_reset(sc); 302 g_mouse_cursor_update_timeout_reset(sc); 303 mtx_unlock(&sc->sc_mtx); 304 305 return (0); /* success */ 306 307 detach: 308 g_mouse_detach(dev); 309 310 return (ENXIO); /* error */ 311 } 312 313 static int 314 g_mouse_detach(device_t dev) 315 { 316 struct g_mouse_softc *sc = device_get_softc(dev); 317 318 DPRINTF("\n"); 319 320 mtx_lock(&sc->sc_mtx); 321 usb_callout_stop(&sc->sc_button_press_callout); 322 usb_callout_stop(&sc->sc_cursor_update_callout); 323 mtx_unlock(&sc->sc_mtx); 324 325 usbd_transfer_unsetup(sc->sc_xfer, G_MOUSE_N_TRANSFER); 326 327 usb_callout_drain(&sc->sc_button_press_callout); 328 usb_callout_drain(&sc->sc_cursor_update_callout); 329 330 mtx_destroy(&sc->sc_mtx); 331 332 return (0); 333 } 334 335 static void 336 g_mouse_intr_callback(struct usb_xfer *xfer, usb_error_t error) 337 { 338 struct g_mouse_softc *sc = usbd_xfer_softc(xfer); 339 int actlen; 340 int aframes; 341 int dx; 342 int dy; 343 int radius; 344 345 usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL); 346 347 DPRINTF("st=%d aframes=%d actlen=%d bytes\n", 348 USB_GET_STATE(xfer), aframes, actlen); 349 350 switch (USB_GET_STATE(xfer)) { 351 case USB_ST_TRANSFERRED: 352 if (!(sc->sc_do_cursor_update || sc->sc_do_button_update)) 353 break; 354 355 case USB_ST_SETUP: 356 tr_setup: 357 358 if (sc->sc_do_cursor_update) { 359 sc->sc_do_cursor_update = 0; 360 sc->sc_tick += 80; 361 if ((sc->sc_tick < 0) || (sc->sc_tick > 7999)) 362 sc->sc_tick = 0; 363 } 364 365 if (sc->sc_do_button_update) { 366 sc->sc_do_button_update = 0; 367 sc->sc_data.buttons ^= BUT_0; 368 } 369 370 radius = sc->sc_radius; 371 372 switch (sc->sc_mode) { 373 case G_MOUSE_MODE_SILENT: 374 sc->sc_data.buttons = 0; 375 break; 376 case G_MOUSE_MODE_SPIRAL: 377 radius = (radius * (8000-sc->sc_tick)) / 8000; 378 case G_MOUSE_MODE_CIRCLE: 379 /* TODO */ 380 sc->sc_curr_y_state = 0; 381 sc->sc_curr_x_state = 0; 382 break; 383 case G_MOUSE_MODE_BOX: 384 if (sc->sc_tick < 2000) { 385 sc->sc_curr_x_state = (sc->sc_tick * radius) / 2000; 386 sc->sc_curr_y_state = 0; 387 } else if (sc->sc_tick < 4000) { 388 sc->sc_curr_x_state = radius; 389 sc->sc_curr_y_state = -(((sc->sc_tick - 2000) * radius) / 2000); 390 } else if (sc->sc_tick < 6000) { 391 sc->sc_curr_x_state = radius - (((sc->sc_tick - 4000) * radius) / 2000); 392 sc->sc_curr_y_state = -radius; 393 } else { 394 sc->sc_curr_x_state = 0; 395 sc->sc_curr_y_state = -radius + (((sc->sc_tick - 6000) * radius) / 2000); 396 } 397 break; 398 default: 399 break; 400 } 401 402 dx = sc->sc_curr_x_state - sc->sc_last_x_state; 403 dy = sc->sc_curr_y_state - sc->sc_last_y_state; 404 405 if (dx < -63) 406 dx = -63; 407 else if (dx > 63) 408 dx = 63; 409 410 if (dy < -63) 411 dy = -63; 412 else if (dy > 63) 413 dy = 63; 414 415 sc->sc_last_x_state += dx; 416 sc->sc_last_y_state += dy; 417 418 sc->sc_data.dx = dx; 419 sc->sc_data.dy = dy; 420 421 usbd_xfer_set_frame_data(xfer, 0, &sc->sc_data, sizeof(sc->sc_data)); 422 usbd_xfer_set_frames(xfer, 1); 423 usbd_transfer_submit(xfer); 424 break; 425 426 default: /* Error */ 427 DPRINTF("error=%s\n", usbd_errstr(error)); 428 429 if (error != USB_ERR_CANCELLED) { 430 /* try to clear stall first */ 431 usbd_xfer_set_stall(xfer); 432 goto tr_setup; 433 } 434 break; 435 } 436 } 437 438 static int 439 g_mouse_handle_request(device_t dev, 440 const void *preq, void **pptr, uint16_t *plen, 441 uint16_t offset, uint8_t *pstate) 442 { 443 const struct usb_device_request *req = preq; 444 uint8_t is_complete = *pstate; 445 446 if (!is_complete) { 447 if ((req->bmRequestType == UT_WRITE_CLASS_INTERFACE) && 448 (req->bRequest == UR_SET_PROTOCOL) && 449 (req->wValue[0] == 0x00) && 450 (req->wValue[1] == 0x00)) { 451 *plen = 0; 452 return (0); 453 } 454 } 455 return (ENXIO); /* use builtin handler */ 456 } 457