1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (augustss@carlstedt.se) at 9 * Carlstedt Research & Technology. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* Universal Host Controller Interface 37 * 38 * UHCI spec: http://www.intel.com/ 39 */ 40 41 /* The low level controller code for UHCI has been split into 42 * PCI probes and UHCI specific code. This was done to facilitate the 43 * sharing of code between *BSD's 44 */ 45 46 #include <sys/stdint.h> 47 #include <sys/stddef.h> 48 #include <sys/param.h> 49 #include <sys/queue.h> 50 #include <sys/types.h> 51 #include <sys/systm.h> 52 #include <sys/kernel.h> 53 #include <sys/bus.h> 54 #include <sys/module.h> 55 #include <sys/lock.h> 56 #include <sys/mutex.h> 57 #include <sys/condvar.h> 58 #include <sys/sysctl.h> 59 #include <sys/sx.h> 60 #include <sys/unistd.h> 61 #include <sys/callout.h> 62 #include <sys/malloc.h> 63 #include <sys/priv.h> 64 65 #include <dev/usb/usb.h> 66 #include <dev/usb/usbdi.h> 67 68 #include <dev/usb/usb_core.h> 69 #include <dev/usb/usb_busdma.h> 70 #include <dev/usb/usb_process.h> 71 #include <dev/usb/usb_util.h> 72 #include <dev/usb/usb_debug.h> 73 74 #include <dev/usb/usb_controller.h> 75 #include <dev/usb/usb_bus.h> 76 #include <dev/usb/usb_pci.h> 77 #include <dev/usb/controller/uhci.h> 78 #include <dev/usb/controller/uhcireg.h> 79 #include "usb_if.h" 80 81 #define PCI_UHCI_VENDORID_INTEL 0x8086 82 #define PCI_UHCI_VENDORID_HP 0x103c 83 #define PCI_UHCI_VENDORID_VIA 0x1106 84 #define PCI_UHCI_VENDORID_VMWARE 0x15ad 85 #define PCI_UHCI_VENDORID_ZHAOXIN 0x1d17 86 87 /* PIIX4E has no separate stepping */ 88 89 static device_probe_t uhci_pci_probe; 90 static device_attach_t uhci_pci_attach; 91 static device_detach_t uhci_pci_detach; 92 static usb_take_controller_t uhci_pci_take_controller; 93 94 static int 95 uhci_pci_take_controller(device_t self) 96 { 97 pci_write_config(self, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN, 2); 98 99 return (0); 100 } 101 102 static const char * 103 uhci_pci_match(device_t self) 104 { 105 uint32_t device_id = pci_get_devid(self); 106 107 switch (device_id) { 108 case 0x26888086: 109 return ("Intel 631XESB/632XESB/3100 USB controller USB-1"); 110 111 case 0x26898086: 112 return ("Intel 631XESB/632XESB/3100 USB controller USB-2"); 113 114 case 0x268a8086: 115 return ("Intel 631XESB/632XESB/3100 USB controller USB-3"); 116 117 case 0x268b8086: 118 return ("Intel 631XESB/632XESB/3100 USB controller USB-4"); 119 120 case 0x70208086: 121 return ("Intel 82371SB (PIIX3) USB controller"); 122 123 case 0x71128086: 124 return ("Intel 82371AB/EB (PIIX4) USB controller"); 125 126 case 0x24128086: 127 return ("Intel 82801AA (ICH) USB controller"); 128 129 case 0x24228086: 130 return ("Intel 82801AB (ICH0) USB controller"); 131 132 case 0x24428086: 133 return ("Intel 82801BA/BAM (ICH2) USB controller USB-A"); 134 135 case 0x24448086: 136 return ("Intel 82801BA/BAM (ICH2) USB controller USB-B"); 137 138 case 0x24828086: 139 return ("Intel 82801CA/CAM (ICH3) USB controller USB-A"); 140 141 case 0x24848086: 142 return ("Intel 82801CA/CAM (ICH3) USB controller USB-B"); 143 144 case 0x24878086: 145 return ("Intel 82801CA/CAM (ICH3) USB controller USB-C"); 146 147 case 0x24c28086: 148 return ("Intel 82801DB (ICH4) USB controller USB-A"); 149 150 case 0x24c48086: 151 return ("Intel 82801DB (ICH4) USB controller USB-B"); 152 153 case 0x24c78086: 154 return ("Intel 82801DB (ICH4) USB controller USB-C"); 155 156 case 0x24d28086: 157 return ("Intel 82801EB (ICH5) USB controller USB-A"); 158 159 case 0x24d48086: 160 return ("Intel 82801EB (ICH5) USB controller USB-B"); 161 162 case 0x24d78086: 163 return ("Intel 82801EB (ICH5) USB controller USB-C"); 164 165 case 0x24de8086: 166 return ("Intel 82801EB (ICH5) USB controller USB-D"); 167 168 case 0x25a98086: 169 return ("Intel 6300ESB USB controller USB-A"); 170 171 case 0x25aa8086: 172 return ("Intel 6300ESB USB controller USB-B"); 173 174 case 0x26588086: 175 return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A"); 176 177 case 0x26598086: 178 return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B"); 179 180 case 0x265a8086: 181 return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C"); 182 183 case 0x265b8086: 184 return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D"); 185 186 case 0x27c88086: 187 return ("Intel 82801G (ICH7) USB controller USB-A"); 188 case 0x27c98086: 189 return ("Intel 82801G (ICH7) USB controller USB-B"); 190 case 0x27ca8086: 191 return ("Intel 82801G (ICH7) USB controller USB-C"); 192 case 0x27cb8086: 193 return ("Intel 82801G (ICH7) USB controller USB-D"); 194 195 case 0x28308086: 196 return ("Intel 82801H (ICH8) USB controller USB-A"); 197 case 0x28318086: 198 return ("Intel 82801H (ICH8) USB controller USB-B"); 199 case 0x28328086: 200 return ("Intel 82801H (ICH8) USB controller USB-C"); 201 case 0x28348086: 202 return ("Intel 82801H (ICH8) USB controller USB-D"); 203 case 0x28358086: 204 return ("Intel 82801H (ICH8) USB controller USB-E"); 205 case 0x29348086: 206 return ("Intel 82801I (ICH9) USB controller"); 207 case 0x29358086: 208 return ("Intel 82801I (ICH9) USB controller"); 209 case 0x29368086: 210 return ("Intel 82801I (ICH9) USB controller"); 211 case 0x29378086: 212 return ("Intel 82801I (ICH9) USB controller"); 213 case 0x29388086: 214 return ("Intel 82801I (ICH9) USB controller"); 215 case 0x29398086: 216 return ("Intel 82801I (ICH9) USB controller"); 217 case 0x3a348086: 218 return ("Intel 82801JI (ICH10) USB controller USB-A"); 219 case 0x3a358086: 220 return ("Intel 82801JI (ICH10) USB controller USB-B"); 221 case 0x3a368086: 222 return ("Intel 82801JI (ICH10) USB controller USB-C"); 223 case 0x3a378086: 224 return ("Intel 82801JI (ICH10) USB controller USB-D"); 225 case 0x3a388086: 226 return ("Intel 82801JI (ICH10) USB controller USB-E"); 227 case 0x3a398086: 228 return ("Intel 82801JI (ICH10) USB controller USB-F"); 229 230 case 0x719a8086: 231 return ("Intel 82443MX USB controller"); 232 233 case 0x76028086: 234 return ("Intel 82372FB/82468GX USB controller"); 235 236 case 0x3300103c: 237 return ("HP iLO Standard Virtual USB controller"); 238 239 case 0x30381106: 240 return ("VIA 83C572 USB controller"); 241 242 case 0x077415ad: 243 return ("VMware USB controller"); 244 245 case 0x30381d17: 246 return ("Zhaoxin ZX-100/ZX-200/ZX-E USB controller"); 247 248 default: 249 break; 250 } 251 252 if ((pci_get_class(self) == PCIC_SERIALBUS) && 253 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 254 (pci_get_progif(self) == PCI_INTERFACE_UHCI)) { 255 return ("UHCI (generic) USB controller"); 256 } 257 return (NULL); 258 } 259 260 static int 261 uhci_pci_probe(device_t self) 262 { 263 const char *desc = uhci_pci_match(self); 264 265 if (desc) { 266 device_set_desc(self, desc); 267 return (BUS_PROBE_DEFAULT); 268 } else { 269 return (ENXIO); 270 } 271 } 272 273 static int 274 uhci_pci_attach(device_t self) 275 { 276 uhci_softc_t *sc = device_get_softc(self); 277 int rid; 278 int err; 279 280 /* initialise some bus fields */ 281 sc->sc_bus.parent = self; 282 sc->sc_bus.devices = sc->sc_devices; 283 sc->sc_bus.devices_max = UHCI_MAX_DEVICES; 284 sc->sc_bus.dma_bits = 32; 285 286 /* get all DMA memory */ 287 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 288 &uhci_iterate_hw_softc)) { 289 return ENOMEM; 290 } 291 sc->sc_dev = self; 292 293 pci_enable_busmaster(self); 294 295 rid = PCI_UHCI_BASE_REG; 296 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_IOPORT, &rid, 297 RF_ACTIVE); 298 if (!sc->sc_io_res) { 299 device_printf(self, "Could not map ports\n"); 300 goto error; 301 } 302 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 303 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 304 sc->sc_io_size = rman_get_size(sc->sc_io_res); 305 306 /* disable interrupts */ 307 bus_space_write_2(sc->sc_io_tag, sc->sc_io_hdl, UHCI_INTR, 0); 308 309 rid = 0; 310 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 311 RF_SHAREABLE | RF_ACTIVE); 312 if (sc->sc_irq_res == NULL) { 313 device_printf(self, "Could not allocate irq\n"); 314 goto error; 315 } 316 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 317 if (!sc->sc_bus.bdev) { 318 device_printf(self, "Could not add USB device\n"); 319 goto error; 320 } 321 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 322 323 /* 324 * uhci_pci_match must never return NULL if uhci_pci_probe 325 * succeeded 326 */ 327 device_set_desc(sc->sc_bus.bdev, uhci_pci_match(self)); 328 switch (pci_get_vendor(self)) { 329 case PCI_UHCI_VENDORID_INTEL: 330 sprintf(sc->sc_vendor, "Intel"); 331 break; 332 case PCI_UHCI_VENDORID_HP: 333 sprintf(sc->sc_vendor, "HP"); 334 break; 335 case PCI_UHCI_VENDORID_VIA: 336 sprintf(sc->sc_vendor, "VIA"); 337 break; 338 case PCI_UHCI_VENDORID_VMWARE: 339 sprintf(sc->sc_vendor, "VMware"); 340 break; 341 case PCI_UHCI_VENDORID_ZHAOXIN: 342 sprintf(sc->sc_vendor, "Zhaoxin"); 343 break; 344 default: 345 if (bootverbose) { 346 device_printf(self, "(New UHCI DeviceId=0x%08x)\n", 347 pci_get_devid(self)); 348 } 349 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 350 } 351 352 switch (pci_read_config(self, PCI_USBREV, 1) & PCI_USB_REV_MASK) { 353 case PCI_USB_REV_PRE_1_0: 354 sc->sc_bus.usbrev = USB_REV_PRE_1_0; 355 break; 356 case PCI_USB_REV_1_0: 357 sc->sc_bus.usbrev = USB_REV_1_0; 358 break; 359 default: 360 /* Quirk for Parallels Desktop 4.0 */ 361 device_printf(self, "USB revision is unknown. Assuming v1.1.\n"); 362 sc->sc_bus.usbrev = USB_REV_1_1; 363 break; 364 } 365 366 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 367 NULL, (driver_intr_t *)uhci_interrupt, sc, &sc->sc_intr_hdl); 368 369 if (err) { 370 device_printf(self, "Could not setup irq, %d\n", err); 371 sc->sc_intr_hdl = NULL; 372 goto error; 373 } 374 /* 375 * Set the PIRQD enable bit and switch off all the others. We don't 376 * want legacy support to interfere with us XXX Does this also mean 377 * that the BIOS won't touch the keyboard anymore if it is connected 378 * to the ports of the root hub? 379 */ 380 #ifdef USB_DEBUG 381 if (pci_read_config(self, PCI_LEGSUP, 2) != PCI_LEGSUP_USBPIRQDEN) { 382 device_printf(self, "LegSup = 0x%04x\n", 383 pci_read_config(self, PCI_LEGSUP, 2)); 384 } 385 #endif 386 pci_write_config(self, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN, 2); 387 388 err = uhci_init(sc); 389 if (!err) { 390 err = device_probe_and_attach(sc->sc_bus.bdev); 391 } 392 if (err) { 393 device_printf(self, "USB init failed\n"); 394 goto error; 395 } 396 return (0); 397 398 error: 399 uhci_pci_detach(self); 400 return (ENXIO); 401 } 402 403 int 404 uhci_pci_detach(device_t self) 405 { 406 uhci_softc_t *sc = device_get_softc(self); 407 408 /* during module unload there are lots of children leftover */ 409 device_delete_children(self); 410 411 /* 412 * disable interrupts that might have been switched on in 413 * uhci_init. 414 */ 415 if (sc->sc_io_res) { 416 USB_BUS_LOCK(&sc->sc_bus); 417 418 /* stop the controller */ 419 uhci_reset(sc); 420 421 USB_BUS_UNLOCK(&sc->sc_bus); 422 } 423 pci_disable_busmaster(self); 424 425 if (sc->sc_irq_res && sc->sc_intr_hdl) { 426 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 427 428 if (err) { 429 /* XXX or should we panic? */ 430 device_printf(self, "Could not tear down irq, %d\n", 431 err); 432 } 433 sc->sc_intr_hdl = NULL; 434 } 435 if (sc->sc_irq_res) { 436 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 437 sc->sc_irq_res = NULL; 438 } 439 if (sc->sc_io_res) { 440 bus_release_resource(self, SYS_RES_IOPORT, PCI_UHCI_BASE_REG, 441 sc->sc_io_res); 442 sc->sc_io_res = NULL; 443 } 444 usb_bus_mem_free_all(&sc->sc_bus, &uhci_iterate_hw_softc); 445 446 return (0); 447 } 448 449 static device_method_t uhci_pci_methods[] = { 450 /* Device interface */ 451 DEVMETHOD(device_probe, uhci_pci_probe), 452 DEVMETHOD(device_attach, uhci_pci_attach), 453 DEVMETHOD(device_detach, uhci_pci_detach), 454 DEVMETHOD(device_suspend, bus_generic_suspend), 455 DEVMETHOD(device_resume, bus_generic_resume), 456 DEVMETHOD(device_shutdown, bus_generic_shutdown), 457 DEVMETHOD(usb_take_controller, uhci_pci_take_controller), 458 459 DEVMETHOD_END 460 }; 461 462 static driver_t uhci_driver = { 463 .name = "uhci", 464 .methods = uhci_pci_methods, 465 .size = sizeof(struct uhci_softc), 466 }; 467 468 DRIVER_MODULE(uhci, pci, uhci_driver, 0, 0); 469 MODULE_DEPEND(uhci, usb, 1, 1, 1); 470