1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2006 Marcel Moolenaar All rights reserved. 5 * Copyright (c) 2001 M. Warner Losh <imp@FreeBSD.org> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/bus.h> 34 #include <sys/conf.h> 35 #include <sys/kernel.h> 36 #include <sys/module.h> 37 #include <machine/bus.h> 38 #include <sys/rman.h> 39 #include <machine/resource.h> 40 41 #include <dev/pci/pcivar.h> 42 #include <dev/pci/pcireg.h> 43 44 #include <dev/uart/uart.h> 45 #include <dev/uart/uart_bus.h> 46 47 #define DEFAULT_RCLK 1843200 48 49 static int uart_pci_probe(device_t dev); 50 static int uart_pci_attach(device_t dev); 51 static int uart_pci_detach(device_t dev); 52 53 static device_method_t uart_pci_methods[] = { 54 /* Device interface */ 55 DEVMETHOD(device_probe, uart_pci_probe), 56 DEVMETHOD(device_attach, uart_pci_attach), 57 DEVMETHOD(device_detach, uart_pci_detach), 58 DEVMETHOD(device_resume, uart_bus_resume), 59 DEVMETHOD_END 60 }; 61 62 static driver_t uart_pci_driver = { 63 uart_driver_name, 64 uart_pci_methods, 65 sizeof(struct uart_softc), 66 }; 67 68 struct pci_id { 69 uint16_t vendor; 70 uint16_t device; 71 uint16_t subven; 72 uint16_t subdev; 73 const char *desc; 74 int rid; 75 int rclk; 76 int regshft; 77 }; 78 79 #define PCI_NO_MSI 0x40000000 80 #define PCI_RID_MASK 0x0000ffff 81 82 static const struct pci_id pci_ns8250_ids[] = { 83 { 0x1028, 0x0008, 0xffff, 0, "Dell Remote Access Card III", 0x14, 84 128 * DEFAULT_RCLK }, 85 { 0x1028, 0x0012, 0xffff, 0, "Dell RAC 4 Daughter Card Virtual UART", 0x14, 86 128 * DEFAULT_RCLK }, 87 { 0x1033, 0x0074, 0x1033, 0x8014, "NEC RCV56ACF 56k Voice Modem", 0x10 }, 88 { 0x1033, 0x007d, 0x1033, 0x8012, "NEC RS232C", 0x10 }, 89 { 0x103c, 0x1048, 0x103c, 0x1227, "HP Diva Serial [GSP] UART - Powerbar SP2", 90 0x10 }, 91 { 0x103c, 0x1048, 0x103c, 0x1301, "HP Diva RMP3", 0x14 }, 92 { 0x103c, 0x1290, 0xffff, 0, "HP Auxiliary Diva Serial Port", 0x18 }, 93 { 0x103c, 0x3301, 0xffff, 0, "HP iLO serial port", 0x10 }, 94 { 0x11c1, 0x0480, 0xffff, 0, "Agere Systems Venus Modem (V90, 56KFlex)", 0x14 }, 95 { 0x115d, 0x0103, 0xffff, 0, "Xircom Cardbus Ethernet + 56k Modem", 0x10 }, 96 { 0x125b, 0x9100, 0xa000, 0x1000, 97 "ASIX AX99100 PCIe 1/2/3/4-port RS-232/422/485", 0x10 }, 98 { 0x1282, 0x6585, 0xffff, 0, "Davicom 56PDV PCI Modem", 0x10 }, 99 { 0x12b9, 0x1008, 0xffff, 0, "3Com 56K FaxModem Model 5610", 0x10 }, 100 { 0x131f, 0x1000, 0xffff, 0, "Siig CyberSerial (1-port) 16550", 0x18 }, 101 { 0x131f, 0x1001, 0xffff, 0, "Siig CyberSerial (1-port) 16650", 0x18 }, 102 { 0x131f, 0x1002, 0xffff, 0, "Siig CyberSerial (1-port) 16850", 0x18 }, 103 { 0x131f, 0x2000, 0xffff, 0, "Siig CyberSerial (1-port) 16550", 0x10 }, 104 { 0x131f, 0x2001, 0xffff, 0, "Siig CyberSerial (1-port) 16650", 0x10 }, 105 { 0x131f, 0x2002, 0xffff, 0, "Siig CyberSerial (1-port) 16850", 0x10 }, 106 { 0x135c, 0x0190, 0xffff, 0, "Quatech SSCLP-100", 0x18 }, 107 { 0x135c, 0x01c0, 0xffff, 0, "Quatech SSCLP-200/300", 0x18 }, 108 { 0x135e, 0x7101, 0xffff, 0, "Sealevel Systems Single Port RS-232/422/485/530", 109 0x18 }, 110 { 0x1407, 0x0110, 0xffff, 0, "Lava Computer mfg DSerial-PCI Port A", 0x10 }, 111 { 0x1407, 0x0111, 0xffff, 0, "Lava Computer mfg DSerial-PCI Port B", 0x10 }, 112 { 0x1407, 0x0510, 0xffff, 0, "Lava SP Serial 550 PCI", 0x10 }, 113 { 0x1409, 0x7168, 0x1409, 0x4025, "Timedia Technology Serial Port", 0x10, 114 8 * DEFAULT_RCLK }, 115 { 0x1409, 0x7168, 0x1409, 0x4027, "Timedia Technology Serial Port", 0x10, 116 8 * DEFAULT_RCLK }, 117 { 0x1409, 0x7168, 0x1409, 0x4028, "Timedia Technology Serial Port", 0x10, 118 8 * DEFAULT_RCLK }, 119 { 0x1409, 0x7168, 0x1409, 0x5025, "Timedia Technology Serial Port", 0x10, 120 8 * DEFAULT_RCLK }, 121 { 0x1409, 0x7168, 0x1409, 0x5027, "Timedia Technology Serial Port", 0x10, 122 8 * DEFAULT_RCLK }, 123 { 0x1415, 0x950b, 0xffff, 0, "Oxford Semiconductor OXCB950 Cardbus 16950 UART", 124 0x10, 16384000 }, 125 { 0x1415, 0xc120, 0xffff, 0, "Oxford Semiconductor OXPCIe952 PCIe 16950 UART", 126 0x10 }, 127 { 0x14e4, 0x160a, 0xffff, 0, "Broadcom TruManage UART", 0x10, 128 128 * DEFAULT_RCLK, 2}, 129 { 0x14e4, 0x4344, 0xffff, 0, "Sony Ericsson GC89 PC Card", 0x10}, 130 { 0x151f, 0x0000, 0xffff, 0, "TOPIC Semiconductor TP560 56k modem", 0x10 }, 131 { 0x1d0f, 0x8250, 0x0000, 0, "Amazon PCI serial device", 0x10 }, 132 { 0x1d0f, 0x8250, 0x1d0f, 0, "Amazon PCI serial device", 0x10 }, 133 { 0x1fd4, 0x1999, 0x1fd4, 0x0001, "Sunix SER5xxxx Serial Port", 0x10, 134 8 * DEFAULT_RCLK }, 135 { 0x8086, 0x0f0a, 0xffff, 0, "Intel ValleyView LPIO1 HSUART#1", 0x10, 136 24 * DEFAULT_RCLK, 2 }, 137 { 0x8086, 0x0f0c, 0xffff, 0, "Intel ValleyView LPIO1 HSUART#2", 0x10, 138 24 * DEFAULT_RCLK, 2 }, 139 { 0x8086, 0x108f, 0xffff, 0, "Intel AMT - SOL", 0x10 }, 140 { 0x8086, 0x19d8, 0xffff, 0, "Intel Denverton UART", 0x10 }, 141 { 0x8086, 0x1c3d, 0xffff, 0, "Intel AMT - KT Controller", 0x10 }, 142 { 0x8086, 0x1d3d, 0xffff, 0, "Intel C600/X79 Series Chipset KT Controller", 143 0x10 }, 144 { 0x8086, 0x1e3d, 0xffff, 0, "Intel Panther Point KT Controller", 0x10 }, 145 { 0x8086, 0x228a, 0xffff, 0, "Intel Cherryview SIO HSUART#1", 0x10, 146 24 * DEFAULT_RCLK, 2 }, 147 { 0x8086, 0x228c, 0xffff, 0, "Intel Cherryview SIO HSUART#2", 0x10, 148 24 * DEFAULT_RCLK, 2 }, 149 { 0x8086, 0x2a07, 0xffff, 0, "Intel AMT - PM965/GM965 KT Controller", 0x10 }, 150 { 0x8086, 0x2a47, 0xffff, 0, "Mobile 4 Series Chipset KT Controller", 0x10 }, 151 { 0x8086, 0x2e17, 0xffff, 0, "4 Series Chipset Serial KT Controller", 0x10 }, 152 { 0x8086, 0x31bc, 0xffff, 0, "Intel Gemini Lake SIO/LPSS UART 0", 0x10, 153 24 * DEFAULT_RCLK, 2 }, 154 { 0x8086, 0x31be, 0xffff, 0, "Intel Gemini Lake SIO/LPSS UART 1", 0x10, 155 24 * DEFAULT_RCLK, 2 }, 156 { 0x8086, 0x31c0, 0xffff, 0, "Intel Gemini Lake SIO/LPSS UART 2", 0x10, 157 24 * DEFAULT_RCLK, 2 }, 158 { 0x8086, 0x31ee, 0xffff, 0, "Intel Gemini Lake SIO/LPSS UART 3", 0x10, 159 24 * DEFAULT_RCLK, 2 }, 160 { 0x8086, 0x3b67, 0xffff, 0, "5 Series/3400 Series Chipset KT Controller", 161 0x10 }, 162 { 0x8086, 0x5abc, 0xffff, 0, "Intel Apollo Lake SIO/LPSS UART 0", 0x10, 163 24 * DEFAULT_RCLK, 2 }, 164 { 0x8086, 0x5abe, 0xffff, 0, "Intel Apollo Lake SIO/LPSS UART 1", 0x10, 165 24 * DEFAULT_RCLK, 2 }, 166 { 0x8086, 0x5ac0, 0xffff, 0, "Intel Apollo Lake SIO/LPSS UART 2", 0x10, 167 24 * DEFAULT_RCLK, 2 }, 168 { 0x8086, 0x5aee, 0xffff, 0, "Intel Apollo Lake SIO/LPSS UART 3", 0x10, 169 24 * DEFAULT_RCLK, 2 }, 170 { 0x8086, 0x8811, 0xffff, 0, "Intel EG20T Serial Port 0", 0x10 }, 171 { 0x8086, 0x8812, 0xffff, 0, "Intel EG20T Serial Port 1", 0x10 }, 172 { 0x8086, 0x8813, 0xffff, 0, "Intel EG20T Serial Port 2", 0x10 }, 173 { 0x8086, 0x8814, 0xffff, 0, "Intel EG20T Serial Port 3", 0x10 }, 174 { 0x8086, 0x8c3d, 0xffff, 0, "Intel Lynx Point KT Controller", 0x10 }, 175 { 0x8086, 0x8cbd, 0xffff, 0, "Intel Wildcat Point KT Controller", 0x10 }, 176 { 0x8086, 0x9c3d, 0xffff, 0, "Intel Lynx Point-LP HECI KT", 0x10 }, 177 { 0x8086, 0xa13d, 0xffff, 0, 178 "100 Series/C230 Series Chipset Family KT Redirection", 179 0x10 | PCI_NO_MSI }, 180 { 0x9710, 0x9820, 0x1000, 1, "NetMos NM9820 Serial Port", 0x10 }, 181 { 0x9710, 0x9835, 0x1000, 1, "NetMos NM9835 Serial Port", 0x10 }, 182 { 0x9710, 0x9865, 0xa000, 0x1000, "NetMos NM9865 Serial Port", 0x10 }, 183 { 0x9710, 0x9900, 0xa000, 0x1000, 184 "MosChip MCS9900 PCIe to Peripheral Controller", 0x10 }, 185 { 0x9710, 0x9901, 0xa000, 0x1000, 186 "MosChip MCS9901 PCIe to Peripheral Controller", 0x10 }, 187 { 0x9710, 0x9904, 0xa000, 0x1000, 188 "MosChip MCS9904 PCIe to Peripheral Controller", 0x10 }, 189 { 0x9710, 0x9922, 0xa000, 0x1000, 190 "MosChip MCS9922 PCIe to Peripheral Controller", 0x10 }, 191 { 0xdeaf, 0x9051, 0xffff, 0, "Middle Digital PC Weasel Serial Port", 0x10 }, 192 { 0xffff, 0, 0xffff, 0, NULL, 0, 0} 193 }; 194 195 const static struct pci_id * 196 uart_pci_match(device_t dev, const struct pci_id *id) 197 { 198 uint16_t device, subdev, subven, vendor; 199 200 vendor = pci_get_vendor(dev); 201 device = pci_get_device(dev); 202 while (id->vendor != 0xffff && 203 (id->vendor != vendor || id->device != device)) 204 id++; 205 if (id->vendor == 0xffff) 206 return (NULL); 207 if (id->subven == 0xffff) 208 return (id); 209 subven = pci_get_subvendor(dev); 210 subdev = pci_get_subdevice(dev); 211 while (id->vendor == vendor && id->device == device && 212 (id->subven != subven || id->subdev != subdev)) 213 id++; 214 return ((id->vendor == vendor && id->device == device) ? id : NULL); 215 } 216 217 static int 218 uart_pci_probe(device_t dev) 219 { 220 struct uart_softc *sc; 221 const struct pci_id *id; 222 struct pci_id cid = { 223 .regshft = 0, 224 .rclk = 0, 225 .rid = 0x10 | PCI_NO_MSI, 226 .desc = "Generic SimpleComm PCI device", 227 }; 228 int result; 229 230 sc = device_get_softc(dev); 231 232 id = uart_pci_match(dev, pci_ns8250_ids); 233 if (id != NULL) { 234 sc->sc_class = &uart_ns8250_class; 235 goto match; 236 } 237 if (pci_get_class(dev) == PCIC_SIMPLECOMM && 238 pci_get_subclass(dev) == PCIS_SIMPLECOMM_UART && 239 pci_get_progif(dev) < PCIP_SIMPLECOMM_UART_16550A) { 240 /* XXX rclk what to do */ 241 id = &cid; 242 sc->sc_class = &uart_ns8250_class; 243 goto match; 244 } 245 /* Add checks for non-ns8250 IDs here. */ 246 return (ENXIO); 247 248 match: 249 result = uart_bus_probe(dev, id->regshft, 0, id->rclk, 250 id->rid & PCI_RID_MASK, 0, 0); 251 /* Bail out on error. */ 252 if (result > 0) 253 return (result); 254 /* Set/override the device description. */ 255 if (id->desc) 256 device_set_desc(dev, id->desc); 257 return (result); 258 } 259 260 static int 261 uart_pci_attach(device_t dev) 262 { 263 struct uart_softc *sc; 264 const struct pci_id *id; 265 int count; 266 267 sc = device_get_softc(dev); 268 269 /* 270 * Use MSI in preference to legacy IRQ if available. However, experience 271 * suggests this is only reliable when one MSI vector is advertised. 272 */ 273 id = uart_pci_match(dev, pci_ns8250_ids); 274 if ((id == NULL || (id->rid & PCI_NO_MSI) == 0) && 275 pci_msi_count(dev) == 1) { 276 count = 1; 277 if (pci_alloc_msi(dev, &count) == 0) { 278 sc->sc_irid = 1; 279 device_printf(dev, "Using %d MSI message\n", count); 280 } 281 } 282 283 return (uart_bus_attach(dev)); 284 } 285 286 static int 287 uart_pci_detach(device_t dev) 288 { 289 struct uart_softc *sc; 290 291 sc = device_get_softc(dev); 292 293 if (sc->sc_irid != 0) 294 pci_release_msi(dev); 295 296 return (uart_bus_detach(dev)); 297 } 298 299 DRIVER_MODULE(uart, pci, uart_pci_driver, uart_devclass, NULL, NULL); 300