1 /*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD$ 35 */ 36 37 /* 38 * Sundance PCI device/vendor ID for the 39 * ST201 chip. 40 */ 41 #define ST_VENDORID 0x13F0 42 #define ST_DEVICEID_ST201_1 0x0200 43 #define ST_DEVICEID_ST201_2 0x0201 44 45 /* 46 * D-Link PCI device/vendor ID for the DL10050[AB] chip 47 */ 48 #define DL_VENDORID 0x1186 49 #define DL_DEVICEID_DL10050 0x1002 50 51 /* 52 * Register definitions for the Sundance Technologies ST201 PCI 53 * fast ethernet controller. The register space is 128 bytes long and 54 * can be accessed using either PCI I/O space or PCI memory mapping. 55 * There are 32-bit, 16-bit and 8-bit registers. 56 */ 57 58 #define STE_DMACTL 0x00 59 #define STE_TX_DMALIST_PTR 0x04 60 #define STE_TX_DMABURST_THRESH 0x08 61 #define STE_TX_DMAURG_THRESH 0x09 62 #define STE_TX_DMAPOLL_PERIOD 0x0A 63 #define STE_RX_DMASTATUS 0x0C 64 #define STE_RX_DMALIST_PTR 0x10 65 #define STE_RX_DMABURST_THRESH 0x14 66 #define STE_RX_DMAURG_THRESH 0x15 67 #define STE_RX_DMAPOLL_PERIOD 0x16 68 #define STE_COUNTDOWN 0x18 69 #define STE_DEBUGCTL 0x1A 70 #define STE_ASICCTL 0x30 71 #define STE_EEPROM_DATA 0x34 72 #define STE_EEPROM_CTL 0x36 73 #define STE_FIFOCTL 0x3A 74 #define STE_TX_STARTTHRESH 0x3C 75 #define STE_RX_EARLYTHRESH 0x3E 76 #define STE_EXT_ROMADDR 0x40 77 #define STE_EXT_ROMDATA 0x44 78 #define STE_WAKE_EVENT 0x45 79 #define STE_TX_STATUS 0x46 80 #define STE_TX_FRAMEID 0x47 81 #define STE_ISR_ACK 0x4A 82 #define STE_IMR 0x4C 83 #define STE_ISR 0x4E 84 #define STE_MACCTL0 0x50 85 #define STE_MACCTL1 0x52 86 #define STE_PAR0 0x54 87 #define STE_PAR1 0x56 88 #define STE_PAR2 0x58 89 #define STE_MAX_FRAMELEN 0x5A 90 #define STE_RX_MODE 0x5C 91 #define STE_TX_RECLAIM_THRESH 0x5D 92 #define STE_PHYCTL 0x5E 93 #define STE_MAR0 0x60 94 #define STE_MAR1 0x62 95 #define STE_MAR2 0x64 96 #define STE_MAR3 0x66 97 98 #define STE_STAT_RX_OCTETS_LO 0x68 99 #define STE_STAT_RX_OCTETS_HI 0x6A 100 #define STE_STAT_TX_OCTETS_LO 0x6C 101 #define STE_STAT_TX_OCTETS_HI 0x6E 102 #define STE_STAT_TX_FRAMES 0x70 103 #define STE_STAT_RX_FRAMES 0x72 104 #define STE_STAT_CARRIER_ERR 0x74 105 #define STE_STAT_LATE_COLLS 0x75 106 #define STE_STAT_MULTI_COLLS 0x76 107 #define STE_STAT_SINGLE_COLLS 0x77 108 #define STE_STAT_TX_DEFER 0x78 109 #define STE_STAT_RX_LOST 0x79 110 #define STE_STAT_TX_EXDEFER 0x7A 111 #define STE_STAT_TX_ABORT 0x7B 112 #define STE_STAT_TX_BCAST 0x7C 113 #define STE_STAT_RX_BCAST 0x7D 114 #define STE_STAT_TX_MCAST 0x7E 115 #define STE_STAT_RX_MCAST 0x7F 116 117 #define STE_DMACTL_RXDMA_STOPPED 0x00000001 118 #define STE_DMACTL_TXDMA_CMPREQ 0x00000002 119 #define STE_DMACTL_TXDMA_STOPPED 0x00000004 120 #define STE_DMACTL_RXDMA_COMPLETE 0x00000008 121 #define STE_DMACTL_TXDMA_COMPLETE 0x00000010 122 #define STE_DMACTL_RXDMA_STALL 0x00000100 123 #define STE_DMACTL_RXDMA_UNSTALL 0x00000200 124 #define STE_DMACTL_TXDMA_STALL 0x00000400 125 #define STE_DMACTL_TXDMA_UNSTALL 0x00000800 126 #define STE_DMACTL_TXDMA_INPROG 0x00004000 127 #define STE_DMACTL_DMA_HALTINPROG 0x00008000 128 #define STE_DMACTL_RXEARLY_ENABLE 0x00020000 129 #define STE_DMACTL_COUNTDOWN_SPEED 0x00040000 130 #define STE_DMACTL_COUNTDOWN_MODE 0x00080000 131 #define STE_DMACTL_MWI_DISABLE 0x00100000 132 #define STE_DMACTL_RX_DISCARD_OFLOWS 0x00400000 133 #define STE_DMACTL_COUNTDOWN_ENABLE 0x00800000 134 #define STE_DMACTL_TARGET_ABORT 0x40000000 135 #define STE_DMACTL_MASTER_ABORT 0x80000000 136 137 /* 138 * TX DMA burst thresh is the number of 32-byte blocks that 139 * must be loaded into the TX Fifo before a TXDMA burst request 140 * will be issued. 141 */ 142 #define STE_TXDMABURST_THRESH 0x1F 143 144 /* 145 * The number of 32-byte blocks in the TX FIFO falls below the 146 * TX DMA urgent threshold, a TX DMA urgent request will be 147 * generated. 148 */ 149 #define STE_TXDMAURG_THRESH 0x3F 150 151 /* 152 * Number of 320ns intervals between polls of the TXDMA next 153 * descriptor pointer (if we're using polling mode). 154 */ 155 #define STE_TXDMA_POLL_PERIOD 0x7F 156 157 #define STE_RX_DMASTATUS_FRAMELEN 0x00001FFF 158 #define STE_RX_DMASTATUS_RXERR 0x00004000 159 #define STE_RX_DMASTATUS_DMADONE 0x00008000 160 #define STE_RX_DMASTATUS_FIFO_OFLOW 0x00010000 161 #define STE_RX_DMASTATUS_RUNT 0x00020000 162 #define STE_RX_DMASTATUS_ALIGNERR 0x00040000 163 #define STE_RX_DMASTATUS_CRCERR 0x00080000 164 #define STE_RX_DMASTATUS_GIANT 0x00100000 165 #define STE_RX_DMASTATUS_DRIBBLE 0x00800000 166 #define STE_RX_DMASTATUS_DMA_OFLOW 0x01000000 167 168 /* 169 * RX DMA burst thresh is the number of 32-byte blocks that 170 * must be present in the RX FIFO before a RXDMA bus master 171 * request will be issued. 172 */ 173 #define STE_RXDMABURST_THRESH 0xFF 174 175 /* 176 * The number of 32-byte blocks in the RX FIFO falls below the 177 * RX DMA urgent threshold, a RX DMA urgent request will be 178 * generated. 179 */ 180 #define STE_RXDMAURG_THRESH 0x1F 181 182 /* 183 * Number of 320ns intervals between polls of the RXDMA complete 184 * bit in the status field on the current RX descriptor (if we're 185 * using polling mode). 186 */ 187 #define STE_RXDMA_POLL_PERIOD 0x7F 188 189 #define STE_DEBUGCTL_GPIO0_CTL 0x0001 190 #define STE_DEBUGCTL_GPIO1_CTL 0x0002 191 #define STE_DEBUGCTL_GPIO0_DATA 0x0004 192 #define STE_DEBUGCTL_GPIO1_DATA 0x0008 193 194 #define STE_ASICCTL_ROMSIZE 0x00000002 195 #define STE_ASICCTL_TX_LARGEPKTS 0x00000004 196 #define STE_ASICCTL_RX_LARGEPKTS 0x00000008 197 #define STE_ASICCTL_EXTROM_DISABLE 0x00000010 198 #define STE_ASICCTL_PHYSPEED_10 0x00000020 199 #define STE_ASICCTL_PHYSPEED_100 0x00000040 200 #define STE_ASICCTL_PHYMEDIA 0x00000080 201 #define STE_ASICCTL_FORCEDCONFIG 0x00000700 202 #define STE_ASICCTL_D3RESET_DISABLE 0x00000800 203 #define STE_ASICCTL_SPEEDUPMODE 0x00002000 204 #define STE_ASICCTL_LEDMODE 0x00004000 205 #define STE_ASICCTL_RSTOUT_POLARITY 0x00008000 206 #define STE_ASICCTL_GLOBAL_RESET 0x00010000 207 #define STE_ASICCTL_RX_RESET 0x00020000 208 #define STE_ASICCTL_TX_RESET 0x00040000 209 #define STE_ASICCTL_DMA_RESET 0x00080000 210 #define STE_ASICCTL_FIFO_RESET 0x00100000 211 #define STE_ASICCTL_NETWORK_RESET 0x00200000 212 #define STE_ASICCTL_HOST_RESET 0x00400000 213 #define STE_ASICCTL_AUTOINIT_RESET 0x00800000 214 #define STE_ASICCTL_EXTRESET_RESET 0x01000000 215 #define STE_ASICCTL_SOFTINTR 0x02000000 216 #define STE_ASICCTL_RESET_BUSY 0x04000000 217 218 #define STE_EECTL_ADDR 0x00FF 219 #define STE_EECTL_OPCODE 0x0300 220 #define STE_EECTL_BUSY 0x1000 221 222 #define STE_EEOPCODE_WRITE 0x0100 223 #define STE_EEOPCODE_READ 0x0200 224 #define STE_EEOPCODE_ERASE 0x0300 225 226 #define STE_FIFOCTL_RAMTESTMODE 0x0001 227 #define STE_FIFOCTL_OVERRUNMODE 0x0200 228 #define STE_FIFOCTL_RXFIFOFULL 0x0800 229 #define STE_FIFOCTL_TX_BUSY 0x4000 230 #define STE_FIFOCTL_RX_BUSY 0x8000 231 232 /* 233 * The number of bytes that must in present in the TX FIFO before 234 * transmission begins. Value should be in increments of 4 bytes. 235 */ 236 #define STE_TXSTART_THRESH 0x1FFC 237 238 /* 239 * Number of bytes that must be present in the RX FIFO before 240 * an RX EARLY interrupt is generated. 241 */ 242 #define STE_RXEARLY_THRESH 0x1FFC 243 244 #define STE_WAKEEVENT_WAKEPKT_ENB 0x01 245 #define STE_WAKEEVENT_MAGICPKT_ENB 0x02 246 #define STE_WAKEEVENT_LINKEVT_ENB 0x04 247 #define STE_WAKEEVENT_WAKEPOLARITY 0x08 248 #define STE_WAKEEVENT_WAKEPKTEVENT 0x10 249 #define STE_WAKEEVENT_MAGICPKTEVENT 0x20 250 #define STE_WAKEEVENT_LINKEVENT 0x40 251 #define STE_WAKEEVENT_WAKEONLAN_ENB 0x80 252 253 #define STE_TXSTATUS_RECLAIMERR 0x02 254 #define STE_TXSTATUS_STATSOFLOW 0x04 255 #define STE_TXSTATUS_EXCESSCOLLS 0x08 256 #define STE_TXSTATUS_UNDERRUN 0x10 257 #define STE_TXSTATUS_TXINTR_REQ 0x40 258 #define STE_TXSTATUS_TXDONE 0x80 259 260 #define STE_ERR_BITS "\20" \ 261 "\2RECLAIM\3STSOFLOW" \ 262 "\4EXCESSCOLLS\5UNDERRUN" \ 263 "\6INTREQ\7DONE" 264 265 #define STE_ISRACK_INTLATCH 0x0001 266 #define STE_ISRACK_HOSTERR 0x0002 267 #define STE_ISRACK_TX_DONE 0x0004 268 #define STE_ISRACK_MACCTL_FRAME 0x0008 269 #define STE_ISRACK_RX_DONE 0x0010 270 #define STE_ISRACK_RX_EARLY 0x0020 271 #define STE_ISRACK_SOFTINTR 0x0040 272 #define STE_ISRACK_STATS_OFLOW 0x0080 273 #define STE_ISRACK_LINKEVENT 0x0100 274 #define STE_ISRACK_TX_DMADONE 0x0200 275 #define STE_ISRACK_RX_DMADONE 0x0400 276 277 #define STE_IMR_HOSTERR 0x0002 278 #define STE_IMR_TX_DONE 0x0004 279 #define STE_IMR_MACCTL_FRAME 0x0008 280 #define STE_IMR_RX_DONE 0x0010 281 #define STE_IMR_RX_EARLY 0x0020 282 #define STE_IMR_SOFTINTR 0x0040 283 #define STE_IMR_STATS_OFLOW 0x0080 284 #define STE_IMR_LINKEVENT 0x0100 285 #define STE_IMR_TX_DMADONE 0x0200 286 #define STE_IMR_RX_DMADONE 0x0400 287 288 #define STE_INTRS \ 289 (STE_IMR_RX_DMADONE|STE_IMR_TX_DMADONE| \ 290 STE_IMR_TX_DONE|STE_IMR_SOFTINTR| \ 291 STE_IMR_HOSTERR) 292 293 #define STE_ISR_INTLATCH 0x0001 294 #define STE_ISR_HOSTERR 0x0002 295 #define STE_ISR_TX_DONE 0x0004 296 #define STE_ISR_MACCTL_FRAME 0x0008 297 #define STE_ISR_RX_DONE 0x0010 298 #define STE_ISR_RX_EARLY 0x0020 299 #define STE_ISR_SOFTINTR 0x0040 300 #define STE_ISR_STATS_OFLOW 0x0080 301 #define STE_ISR_LINKEVENT 0x0100 302 #define STE_ISR_TX_DMADONE 0x0200 303 #define STE_ISR_RX_DMADONE 0x0400 304 305 /* 306 * Note: the Sundance manual gives the impression that the's 307 * only one 32-bit MACCTL register. In fact, there are two 308 * 16-bit registers side by side, and you have to access them 309 * separately. 310 */ 311 #define STE_MACCTL0_IPG 0x0003 312 #define STE_MACCTL0_FULLDUPLEX 0x0020 313 #define STE_MACCTL0_RX_GIANTS 0x0040 314 #define STE_MACCTL0_FLOWCTL_ENABLE 0x0100 315 #define STE_MACCTL0_RX_FCS 0x0200 316 #define STE_MACCTL0_FIFOLOOPBK 0x0400 317 #define STE_MACCTL0_MACLOOPBK 0x0800 318 319 #define STE_MACCTL1_COLLDETECT 0x0001 320 #define STE_MACCTL1_CARRSENSE 0x0002 321 #define STE_MACCTL1_TX_BUSY 0x0004 322 #define STE_MACCTL1_TX_ERROR 0x0008 323 #define STE_MACCTL1_STATS_ENABLE 0x0020 324 #define STE_MACCTL1_STATS_DISABLE 0x0040 325 #define STE_MACCTL1_STATS_ENABLED 0x0080 326 #define STE_MACCTL1_TX_ENABLE 0x0100 327 #define STE_MACCTL1_TX_DISABLE 0x0200 328 #define STE_MACCTL1_TX_ENABLED 0x0400 329 #define STE_MACCTL1_RX_ENABLE 0x0800 330 #define STE_MACCTL1_RX_DISABLE 0x1000 331 #define STE_MACCTL1_RX_ENABLED 0x2000 332 #define STE_MACCTL1_PAUSED 0x4000 333 334 #define STE_IPG_96BT 0x00000000 335 #define STE_IPG_128BT 0x00000001 336 #define STE_IPG_224BT 0x00000002 337 #define STE_IPG_544BT 0x00000003 338 339 #define STE_RXMODE_UNICAST 0x01 340 #define STE_RXMODE_ALLMULTI 0x02 341 #define STE_RXMODE_BROADCAST 0x04 342 #define STE_RXMODE_PROMISC 0x08 343 #define STE_RXMODE_MULTIHASH 0x10 344 #define STE_RXMODE_ALLIPMULTI 0x20 345 346 #define STE_PHYCTL_MCLK 0x01 347 #define STE_PHYCTL_MDATA 0x02 348 #define STE_PHYCTL_MDIR 0x04 349 #define STE_PHYCTL_CLK25_DISABLE 0x08 350 #define STE_PHYCTL_DUPLEXPOLARITY 0x10 351 #define STE_PHYCTL_DUPLEXSTAT 0x20 352 #define STE_PHYCTL_SPEEDSTAT 0x40 353 #define STE_PHYCTL_LINKSTAT 0x80 354 355 #define STE_TIMER_TICKS 32 356 #define STE_TIMER_USECS(x) ((x * 10) / STE_TIMER_TICKS) 357 358 #define STE_IM_RX_TIMER_MIN 0 359 #define STE_IM_RX_TIMER_MAX 209712 360 #define STE_IM_RX_TIMER_DEFAULT 150 361 362 /* 363 * EEPROM offsets. 364 */ 365 #define STE_EEADDR_CONFIGPARM 0x00 366 #define STE_EEADDR_ASICCTL 0x02 367 #define STE_EEADDR_SUBSYS_ID 0x04 368 #define STE_EEADDR_SUBVEN_ID 0x08 369 370 #define STE_EEADDR_NODE0 0x10 371 #define STE_EEADDR_NODE1 0x12 372 #define STE_EEADDR_NODE2 0x14 373 374 /* PCI registers */ 375 #define STE_PCI_VENDOR_ID 0x00 376 #define STE_PCI_DEVICE_ID 0x02 377 #define STE_PCI_COMMAND 0x04 378 #define STE_PCI_STATUS 0x06 379 #define STE_PCI_CLASSCODE 0x09 380 #define STE_PCI_LATENCY_TIMER 0x0D 381 #define STE_PCI_HEADER_TYPE 0x0E 382 #define STE_PCI_LOIO 0x10 383 #define STE_PCI_LOMEM 0x14 384 #define STE_PCI_BIOSROM 0x30 385 #define STE_PCI_INTLINE 0x3C 386 #define STE_PCI_INTPIN 0x3D 387 #define STE_PCI_MINGNT 0x3E 388 #define STE_PCI_MINLAT 0x0F 389 390 #define STE_PCI_CAPID 0x50 /* 8 bits */ 391 #define STE_PCI_NEXTPTR 0x51 /* 8 bits */ 392 #define STE_PCI_PWRMGMTCAP 0x52 /* 16 bits */ 393 #define STE_PCI_PWRMGMTCTRL 0x54 /* 16 bits */ 394 395 #define STE_PSTATE_MASK 0x0003 396 #define STE_PSTATE_D0 0x0000 397 #define STE_PSTATE_D1 0x0002 398 #define STE_PSTATE_D2 0x0002 399 #define STE_PSTATE_D3 0x0003 400 #define STE_PME_EN 0x0010 401 #define STE_PME_STATUS 0x8000 402 403 struct ste_hw_stats { 404 uint64_t rx_bytes; 405 uint32_t rx_frames; 406 uint32_t rx_bcast_frames; 407 uint32_t rx_mcast_frames; 408 uint32_t rx_lost_frames; 409 uint64_t tx_bytes; 410 uint32_t tx_frames; 411 uint32_t tx_bcast_frames; 412 uint32_t tx_mcast_frames; 413 uint32_t tx_carrsense_errs; 414 uint32_t tx_single_colls; 415 uint32_t tx_multi_colls; 416 uint32_t tx_late_colls; 417 uint32_t tx_frames_defered; 418 uint32_t tx_excess_defers; 419 uint32_t tx_abort; 420 }; 421 422 struct ste_frag { 423 uint32_t ste_addr; 424 uint32_t ste_len; 425 }; 426 427 #define STE_FRAG_LAST 0x80000000 428 #define STE_FRAG_LEN 0x00001FFF 429 430 /* 431 * A TFD is 16 to 512 bytes in length which means it can have up to 126 432 * fragments for a single Tx frame. Since most frames used in stack have 433 * 3-4 fragments supporting 8 fragments would be enough for normal 434 * operation. If we encounter more than 8 fragments we'll collapse them 435 * into a frame that has less than or equal to 8 fragments. Each buffer 436 * address of a fragment has no alignment limitation. 437 */ 438 #define STE_MAXFRAGS 8 439 440 struct ste_desc { 441 uint32_t ste_next; 442 uint32_t ste_ctl; 443 struct ste_frag ste_frags[STE_MAXFRAGS]; 444 }; 445 446 /* 447 * A RFD has the same structure of TFD which in turn means hardware 448 * supports scatter operation in Rx buffer. Since we just allocate Rx 449 * buffer with m_getcl(9) there is no fragmentation at all so use 450 * single fragment for RFD. 451 */ 452 struct ste_desc_onefrag { 453 uint32_t ste_next; 454 uint32_t ste_status; 455 struct ste_frag ste_frag; 456 }; 457 458 #define STE_TXCTL_WORDALIGN 0x00000003 459 #define STE_TXCTL_ALIGN_DIS 0x00000001 460 #define STE_TXCTL_FRAMEID 0x000003FC 461 #define STE_TXCTL_NOCRC 0x00002000 462 #define STE_TXCTL_TXINTR 0x00008000 463 #define STE_TXCTL_DMADONE 0x00010000 464 #define STE_TXCTL_DMAINTR 0x80000000 465 466 #define STE_RXSTAT_FRAMELEN 0x00001FFF 467 #define STE_RXSTAT_FRAME_ERR 0x00004000 468 #define STE_RXSTAT_DMADONE 0x00008000 469 #define STE_RXSTAT_FIFO_OFLOW 0x00010000 470 #define STE_RXSTAT_RUNT 0x00020000 471 #define STE_RXSTAT_ALIGNERR 0x00040000 472 #define STE_RXSTAT_CRCERR 0x00080000 473 #define STE_RXSTAT_GIANT 0x00100000 474 #define STE_RXSTAT_DRIBBLEBITS 0x00800000 475 #define STE_RXSTAT_DMA_OFLOW 0x01000000 476 #define STE_RXATAT_ONEBUF 0x10000000 477 478 #define STE_RX_BYTES(x) ((x) & STE_RXSTAT_FRAMELEN) 479 480 /* 481 * register space access macros 482 */ 483 #define CSR_WRITE_4(sc, reg, val) \ 484 bus_write_4((sc)->ste_res, reg, val) 485 #define CSR_WRITE_2(sc, reg, val) \ 486 bus_write_2((sc)->ste_res, reg, val) 487 #define CSR_WRITE_1(sc, reg, val) \ 488 bus_write_1((sc)->ste_res, reg, val) 489 490 #define CSR_READ_4(sc, reg) \ 491 bus_read_4((sc)->ste_res, reg) 492 #define CSR_READ_2(sc, reg) \ 493 bus_read_2((sc)->ste_res, reg) 494 #define CSR_READ_1(sc, reg) \ 495 bus_read_1((sc)->ste_res, reg) 496 497 #define CSR_BARRIER(sc, reg, length, flags) \ 498 bus_barrier((sc)->ste_res, reg, length, flags) 499 500 #define STE_DESC_ALIGN 8 501 #define STE_RX_LIST_CNT 128 502 #define STE_TX_LIST_CNT 128 503 #define STE_RX_LIST_SZ \ 504 (sizeof(struct ste_desc_onefrag) * STE_RX_LIST_CNT) 505 #define STE_TX_LIST_SZ \ 506 (sizeof(struct ste_desc) * STE_TX_LIST_CNT) 507 #define STE_ADDR_LO(x) ((uint64_t)(x) & 0xFFFFFFFF) 508 #define STE_ADDR_HI(x) ((uint64_t)(x) >> 32) 509 510 /* 511 * Since Tx status can hold up to 31 status bytes we should 512 * check Tx status before controller fills it up. Otherwise 513 * Tx MAC stalls. 514 */ 515 #define STE_TX_INTR_FRAMES 16 516 #define STE_TX_TIMEOUT 5 517 #define STE_TIMEOUT 1000 518 #define STE_MIN_FRAMELEN 60 519 #define STE_PACKET_SIZE 1536 520 #define STE_INC(x, y) (x) = (x + 1) % y 521 #define STE_DEC(x, y) (x) = ((x) + ((y) - 1)) % (y) 522 #define STE_NEXT(x, y) (x + 1) % y 523 524 struct ste_type { 525 uint16_t ste_vid; 526 uint16_t ste_did; 527 const char *ste_name; 528 }; 529 530 struct ste_list_data { 531 struct ste_desc_onefrag *ste_rx_list; 532 bus_addr_t ste_rx_list_paddr; 533 struct ste_desc *ste_tx_list; 534 bus_addr_t ste_tx_list_paddr; 535 }; 536 537 struct ste_chain { 538 struct ste_desc *ste_ptr; 539 struct mbuf *ste_mbuf; 540 struct ste_chain *ste_next; 541 uint32_t ste_phys; 542 bus_dmamap_t ste_map; 543 }; 544 545 struct ste_chain_onefrag { 546 struct ste_desc_onefrag *ste_ptr; 547 struct mbuf *ste_mbuf; 548 struct ste_chain_onefrag *ste_next; 549 bus_dmamap_t ste_map; 550 }; 551 552 struct ste_chain_data { 553 bus_dma_tag_t ste_parent_tag; 554 bus_dma_tag_t ste_rx_tag; 555 bus_dma_tag_t ste_tx_tag; 556 bus_dma_tag_t ste_rx_list_tag; 557 bus_dmamap_t ste_rx_list_map; 558 bus_dma_tag_t ste_tx_list_tag; 559 bus_dmamap_t ste_tx_list_map; 560 bus_dmamap_t ste_rx_sparemap; 561 struct ste_chain_onefrag ste_rx_chain[STE_RX_LIST_CNT]; 562 struct ste_chain ste_tx_chain[STE_TX_LIST_CNT]; 563 struct ste_chain_onefrag *ste_rx_head; 564 struct ste_chain *ste_last_tx; 565 int ste_tx_prod; 566 int ste_tx_cons; 567 int ste_tx_cnt; 568 }; 569 570 struct ste_softc { 571 struct ifnet *ste_ifp; 572 struct resource *ste_res; 573 int ste_res_id; 574 int ste_res_type; 575 struct resource *ste_irq; 576 void *ste_intrhand; 577 struct ste_type *ste_info; 578 device_t ste_miibus; 579 device_t ste_dev; 580 int ste_tx_thresh; 581 int ste_flags; 582 #define STE_FLAG_ONE_PHY 0x0001 583 #define STE_FLAG_LINK 0x8000 584 int ste_if_flags; 585 int ste_timer; 586 int ste_int_rx_act; 587 int ste_int_rx_mod; 588 struct ste_list_data ste_ldata; 589 struct ste_chain_data ste_cdata; 590 struct callout ste_callout; 591 struct ste_hw_stats ste_stats; 592 struct mtx ste_mtx; 593 }; 594 595 #define STE_LOCK(_sc) mtx_lock(&(_sc)->ste_mtx) 596 #define STE_UNLOCK(_sc) mtx_unlock(&(_sc)->ste_mtx) 597 #define STE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->ste_mtx, MA_OWNED) 598