1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 1997-2000 Nicolas Souchu 5 * Copyright (c) 2001 Alcove - Nicolas Souchu 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include "opt_ppc.h" 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/bus.h> 38 #include <sys/kernel.h> 39 #include <sys/lock.h> 40 #include <sys/interrupt.h> 41 #include <sys/module.h> 42 #include <sys/malloc.h> 43 #include <sys/mutex.h> 44 #include <sys/proc.h> 45 46 #include <machine/bus.h> 47 #include <machine/resource.h> 48 #include <sys/rman.h> 49 50 #ifdef __i386__ 51 #include <vm/vm.h> 52 #include <vm/pmap.h> 53 #include <machine/vmparam.h> 54 #include <machine/pc/bios.h> 55 #endif 56 57 #include <dev/ppbus/ppbconf.h> 58 #include <dev/ppbus/ppb_msq.h> 59 60 #include <dev/ppc/ppcvar.h> 61 #include <dev/ppc/ppcreg.h> 62 63 #include "ppbus_if.h" 64 65 static void ppcintr(void *arg); 66 67 #define IO_LPTSIZE_EXTENDED 8 /* "Extended" LPT controllers */ 68 #define IO_LPTSIZE_NORMAL 4 /* "Normal" LPT controllers */ 69 70 #define LOG_PPC(function, ppc, string) \ 71 if (bootverbose) printf("%s: %s\n", function, string) 72 73 #define DEVTOSOFTC(dev) ((struct ppc_data *)device_get_softc(dev)) 74 75 /* 76 * We use critical enter/exit for the simple config locking needed to 77 * detect the devices. We just want to make sure that both of our writes 78 * happen without someone else also writing to those config registers. Since 79 * we just do this at startup, Giant keeps multiple threads from executing, 80 * and critical_enter() then is all that's needed to keep us from being preempted 81 * during the critical sequences with the hardware. 82 * 83 * Note: this doesn't prevent multiple threads from putting the chips into 84 * config mode, but since we only do that to detect the type at startup the 85 * extra overhead isn't needed since Giant protects us from multiple entry 86 * and no other code changes these registers. 87 */ 88 #define PPC_CONFIG_LOCK(ppc) critical_enter() 89 #define PPC_CONFIG_UNLOCK(ppc) critical_exit() 90 91 devclass_t ppc_devclass; 92 const char ppc_driver_name[] = "ppc"; 93 94 static char *ppc_models[] = { 95 "SMC-like", "SMC FDC37C665GT", "SMC FDC37C666GT", "PC87332", "PC87306", 96 "82091AA", "Generic", "W83877F", "W83877AF", "Winbond", "PC87334", 97 "SMC FDC37C935", "PC87303", 0 98 }; 99 100 /* list of available modes */ 101 static char *ppc_avms[] = { 102 "COMPATIBLE", "NIBBLE-only", "PS2-only", "PS2/NIBBLE", "EPP-only", 103 "EPP/NIBBLE", "EPP/PS2", "EPP/PS2/NIBBLE", "ECP-only", 104 "ECP/NIBBLE", "ECP/PS2", "ECP/PS2/NIBBLE", "ECP/EPP", 105 "ECP/EPP/NIBBLE", "ECP/EPP/PS2", "ECP/EPP/PS2/NIBBLE", 0 106 }; 107 108 /* list of current executing modes 109 * Note that few modes do not actually exist. 110 */ 111 static char *ppc_modes[] = { 112 "COMPATIBLE", "NIBBLE", "PS/2", "PS/2", "EPP", 113 "EPP", "EPP", "EPP", "ECP", 114 "ECP", "ECP+PS2", "ECP+PS2", "ECP+EPP", 115 "ECP+EPP", "ECP+EPP", "ECP+EPP", 0 116 }; 117 118 static char *ppc_epp_protocol[] = { " (EPP 1.9)", " (EPP 1.7)", 0 }; 119 120 #ifdef __i386__ 121 /* 122 * BIOS printer list - used by BIOS probe. 123 */ 124 #define BIOS_PPC_PORTS 0x408 125 #define BIOS_PORTS ((short *)BIOS_PADDRTOVADDR(BIOS_PPC_PORTS)) 126 #define BIOS_MAX_PPC 4 127 #endif 128 129 /* 130 * ppc_ecp_sync() XXX 131 */ 132 int 133 ppc_ecp_sync(device_t dev) 134 { 135 int i, r; 136 struct ppc_data *ppc = DEVTOSOFTC(dev); 137 138 PPC_ASSERT_LOCKED(ppc); 139 if (!(ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_dtm & PPB_ECP)) 140 return 0; 141 142 r = r_ecr(ppc); 143 if ((r & 0xe0) != PPC_ECR_EPP) 144 return 0; 145 146 for (i = 0; i < 100; i++) { 147 r = r_ecr(ppc); 148 if (r & 0x1) 149 return 0; 150 DELAY(100); 151 } 152 153 device_printf(dev, "ECP sync failed as data still present in FIFO.\n"); 154 155 return 0; 156 } 157 158 /* 159 * ppc_detect_fifo() 160 * 161 * Detect parallel port FIFO 162 */ 163 static int 164 ppc_detect_fifo(struct ppc_data *ppc) 165 { 166 char ecr_sav; 167 char ctr_sav, ctr, cc; 168 short i; 169 170 /* save registers */ 171 ecr_sav = r_ecr(ppc); 172 ctr_sav = r_ctr(ppc); 173 174 /* enter ECP configuration mode, no interrupt, no DMA */ 175 w_ecr(ppc, 0xf4); 176 177 /* read PWord size - transfers in FIFO mode must be PWord aligned */ 178 ppc->ppc_pword = (r_cnfgA(ppc) & PPC_PWORD_MASK); 179 180 /* XXX 16 and 32 bits implementations not supported */ 181 if (ppc->ppc_pword != PPC_PWORD_8) { 182 LOG_PPC(__func__, ppc, "PWord not supported"); 183 goto error; 184 } 185 186 w_ecr(ppc, 0x34); /* byte mode, no interrupt, no DMA */ 187 ctr = r_ctr(ppc); 188 w_ctr(ppc, ctr | PCD); /* set direction to 1 */ 189 190 /* enter ECP test mode, no interrupt, no DMA */ 191 w_ecr(ppc, 0xd4); 192 193 /* flush the FIFO */ 194 for (i=0; i<1024; i++) { 195 if (r_ecr(ppc) & PPC_FIFO_EMPTY) 196 break; 197 cc = r_fifo(ppc); 198 } 199 200 if (i >= 1024) { 201 LOG_PPC(__func__, ppc, "can't flush FIFO"); 202 goto error; 203 } 204 205 /* enable interrupts, no DMA */ 206 w_ecr(ppc, 0xd0); 207 208 /* determine readIntrThreshold 209 * fill the FIFO until serviceIntr is set 210 */ 211 for (i=0; i<1024; i++) { 212 w_fifo(ppc, (char)i); 213 if (!ppc->ppc_rthr && (r_ecr(ppc) & PPC_SERVICE_INTR)) { 214 /* readThreshold reached */ 215 ppc->ppc_rthr = i+1; 216 } 217 if (r_ecr(ppc) & PPC_FIFO_FULL) { 218 ppc->ppc_fifo = i+1; 219 break; 220 } 221 } 222 223 if (i >= 1024) { 224 LOG_PPC(__func__, ppc, "can't fill FIFO"); 225 goto error; 226 } 227 228 w_ecr(ppc, 0xd4); /* test mode, no interrupt, no DMA */ 229 w_ctr(ppc, ctr & ~PCD); /* set direction to 0 */ 230 w_ecr(ppc, 0xd0); /* enable interrupts */ 231 232 /* determine writeIntrThreshold 233 * empty the FIFO until serviceIntr is set 234 */ 235 for (i=ppc->ppc_fifo; i>0; i--) { 236 if (r_fifo(ppc) != (char)(ppc->ppc_fifo-i)) { 237 LOG_PPC(__func__, ppc, "invalid data in FIFO"); 238 goto error; 239 } 240 if (r_ecr(ppc) & PPC_SERVICE_INTR) { 241 /* writeIntrThreshold reached */ 242 ppc->ppc_wthr = ppc->ppc_fifo - i+1; 243 } 244 /* if FIFO empty before the last byte, error */ 245 if (i>1 && (r_ecr(ppc) & PPC_FIFO_EMPTY)) { 246 LOG_PPC(__func__, ppc, "data lost in FIFO"); 247 goto error; 248 } 249 } 250 251 /* FIFO must be empty after the last byte */ 252 if (!(r_ecr(ppc) & PPC_FIFO_EMPTY)) { 253 LOG_PPC(__func__, ppc, "can't empty the FIFO"); 254 goto error; 255 } 256 257 w_ctr(ppc, ctr_sav); 258 w_ecr(ppc, ecr_sav); 259 260 return (0); 261 262 error: 263 w_ctr(ppc, ctr_sav); 264 w_ecr(ppc, ecr_sav); 265 266 return (EINVAL); 267 } 268 269 static int 270 ppc_detect_port(struct ppc_data *ppc) 271 { 272 273 w_ctr(ppc, 0x0c); /* To avoid missing PS2 ports */ 274 w_dtr(ppc, 0xaa); 275 if (r_dtr(ppc) != 0xaa) 276 return (0); 277 278 return (1); 279 } 280 281 /* 282 * EPP timeout, according to the PC87332 manual 283 * Semantics of clearing EPP timeout bit. 284 * PC87332 - reading SPP_STR does it... 285 * SMC - write 1 to EPP timeout bit XXX 286 * Others - (?) write 0 to EPP timeout bit 287 */ 288 static void 289 ppc_reset_epp_timeout(struct ppc_data *ppc) 290 { 291 char r; 292 293 r = r_str(ppc); 294 w_str(ppc, r | 0x1); 295 w_str(ppc, r & 0xfe); 296 297 return; 298 } 299 300 static int 301 ppc_check_epp_timeout(struct ppc_data *ppc) 302 { 303 ppc_reset_epp_timeout(ppc); 304 305 return (!(r_str(ppc) & TIMEOUT)); 306 } 307 308 /* 309 * Configure current operating mode 310 */ 311 static int 312 ppc_generic_setmode(struct ppc_data *ppc, int mode) 313 { 314 u_char ecr = 0; 315 316 /* check if mode is available */ 317 if (mode && !(ppc->ppc_avm & mode)) 318 return (EINVAL); 319 320 /* if ECP mode, configure ecr register */ 321 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 322 /* return to byte mode (keeping direction bit), 323 * no interrupt, no DMA to be able to change to 324 * ECP 325 */ 326 w_ecr(ppc, PPC_ECR_RESET); 327 ecr = PPC_DISABLE_INTR; 328 329 if (mode & PPB_EPP) 330 return (EINVAL); 331 else if (mode & PPB_ECP) 332 /* select ECP mode */ 333 ecr |= PPC_ECR_ECP; 334 else if (mode & PPB_PS2) 335 /* select PS2 mode with ECP */ 336 ecr |= PPC_ECR_PS2; 337 else 338 /* select COMPATIBLE/NIBBLE mode */ 339 ecr |= PPC_ECR_STD; 340 341 w_ecr(ppc, ecr); 342 } 343 344 ppc->ppc_mode = mode; 345 346 return (0); 347 } 348 349 /* 350 * The ppc driver is free to choose options like FIFO or DMA 351 * if ECP mode is available. 352 * 353 * The 'RAW' option allows the upper drivers to force the ppc mode 354 * even with FIFO, DMA available. 355 */ 356 static int 357 ppc_smclike_setmode(struct ppc_data *ppc, int mode) 358 { 359 u_char ecr = 0; 360 361 /* check if mode is available */ 362 if (mode && !(ppc->ppc_avm & mode)) 363 return (EINVAL); 364 365 /* if ECP mode, configure ecr register */ 366 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 367 /* return to byte mode (keeping direction bit), 368 * no interrupt, no DMA to be able to change to 369 * ECP or EPP mode 370 */ 371 w_ecr(ppc, PPC_ECR_RESET); 372 ecr = PPC_DISABLE_INTR; 373 374 if (mode & PPB_EPP) 375 /* select EPP mode */ 376 ecr |= PPC_ECR_EPP; 377 else if (mode & PPB_ECP) 378 /* select ECP mode */ 379 ecr |= PPC_ECR_ECP; 380 else if (mode & PPB_PS2) 381 /* select PS2 mode with ECP */ 382 ecr |= PPC_ECR_PS2; 383 else 384 /* select COMPATIBLE/NIBBLE mode */ 385 ecr |= PPC_ECR_STD; 386 387 w_ecr(ppc, ecr); 388 } 389 390 ppc->ppc_mode = mode; 391 392 return (0); 393 } 394 395 #ifdef PPC_PROBE_CHIPSET 396 /* 397 * ppc_pc873xx_detect 398 * 399 * Probe for a Natsemi PC873xx-family part. 400 * 401 * References in this function are to the National Semiconductor 402 * PC87332 datasheet TL/C/11930, May 1995 revision. 403 */ 404 static int pc873xx_basetab[] = {0x0398, 0x026e, 0x015c, 0x002e, 0}; 405 static int pc873xx_porttab[] = {0x0378, 0x03bc, 0x0278, 0}; 406 static int pc873xx_irqtab[] = {5, 7, 5, 0}; 407 408 static int pc873xx_regstab[] = { 409 PC873_FER, PC873_FAR, PC873_PTR, 410 PC873_FCR, PC873_PCR, PC873_PMC, 411 PC873_TUP, PC873_SID, PC873_PNP0, 412 PC873_PNP1, PC873_LPTBA, -1 413 }; 414 415 static char *pc873xx_rnametab[] = { 416 "FER", "FAR", "PTR", "FCR", "PCR", 417 "PMC", "TUP", "SID", "PNP0", "PNP1", 418 "LPTBA", NULL 419 }; 420 421 static int 422 ppc_pc873xx_detect(struct ppc_data *ppc, int chipset_mode) /* XXX mode never forced */ 423 { 424 static int index = 0; 425 int idport, irq; 426 int ptr, pcr, val, i; 427 428 while ((idport = pc873xx_basetab[index++])) { 429 /* XXX should check first to see if this location is already claimed */ 430 431 /* 432 * Pull the 873xx through the power-on ID cycle (2.2,1.). 433 * We can't use this to locate the chip as it may already have 434 * been used by the BIOS. 435 */ 436 (void)inb(idport); (void)inb(idport); 437 (void)inb(idport); (void)inb(idport); 438 439 /* 440 * Read the SID byte. Possible values are : 441 * 442 * 01010xxx PC87334 443 * 0001xxxx PC87332 444 * 01110xxx PC87306 445 * 00110xxx PC87303 446 */ 447 outb(idport, PC873_SID); 448 val = inb(idport + 1); 449 if ((val & 0xf0) == 0x10) { 450 ppc->ppc_model = NS_PC87332; 451 } else if ((val & 0xf8) == 0x70) { 452 ppc->ppc_model = NS_PC87306; 453 } else if ((val & 0xf8) == 0x50) { 454 ppc->ppc_model = NS_PC87334; 455 } else if ((val & 0xf8) == 0x40) { /* Should be 0x30 by the 456 documentation, but probing 457 yielded 0x40... */ 458 ppc->ppc_model = NS_PC87303; 459 } else { 460 if (bootverbose && (val != 0xff)) 461 printf("PC873xx probe at 0x%x got unknown ID 0x%x\n", idport, val); 462 continue ; /* not recognised */ 463 } 464 465 /* print registers */ 466 if (bootverbose) { 467 printf("PC873xx"); 468 for (i=0; pc873xx_regstab[i] != -1; i++) { 469 outb(idport, pc873xx_regstab[i]); 470 printf(" %s=0x%x", pc873xx_rnametab[i], 471 inb(idport + 1) & 0xff); 472 } 473 printf("\n"); 474 } 475 476 /* 477 * We think we have one. Is it enabled and where we want it to be? 478 */ 479 outb(idport, PC873_FER); 480 val = inb(idport + 1); 481 if (!(val & PC873_PPENABLE)) { 482 if (bootverbose) 483 printf("PC873xx parallel port disabled\n"); 484 continue; 485 } 486 outb(idport, PC873_FAR); 487 val = inb(idport + 1); 488 /* XXX we should create a driver instance for every port found */ 489 if (pc873xx_porttab[val & 0x3] != ppc->ppc_base) { 490 /* First try to change the port address to that requested... */ 491 492 switch (ppc->ppc_base) { 493 case 0x378: 494 val &= 0xfc; 495 break; 496 497 case 0x3bc: 498 val &= 0xfd; 499 break; 500 501 case 0x278: 502 val &= 0xfe; 503 break; 504 505 default: 506 val &= 0xfd; 507 break; 508 } 509 510 outb(idport, PC873_FAR); 511 outb(idport + 1, val); 512 outb(idport + 1, val); 513 514 /* Check for success by reading back the value we supposedly 515 wrote and comparing...*/ 516 517 outb(idport, PC873_FAR); 518 val = inb(idport + 1) & 0x3; 519 520 /* If we fail, report the failure... */ 521 522 if (pc873xx_porttab[val] != ppc->ppc_base) { 523 if (bootverbose) 524 printf("PC873xx at 0x%x not for driver at port 0x%x\n", 525 pc873xx_porttab[val], ppc->ppc_base); 526 } 527 continue; 528 } 529 530 outb(idport, PC873_PTR); 531 ptr = inb(idport + 1); 532 533 /* get irq settings */ 534 if (ppc->ppc_base == 0x378) 535 irq = (ptr & PC873_LPTBIRQ7) ? 7 : 5; 536 else 537 irq = pc873xx_irqtab[val]; 538 539 if (bootverbose) 540 printf("PC873xx irq %d at 0x%x\n", irq, ppc->ppc_base); 541 542 /* 543 * Check if irq settings are correct 544 */ 545 if (irq != ppc->ppc_irq) { 546 /* 547 * If the chipset is not locked and base address is 0x378, 548 * we have another chance 549 */ 550 if (ppc->ppc_base == 0x378 && !(ptr & PC873_CFGLOCK)) { 551 if (ppc->ppc_irq == 7) { 552 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 553 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 554 } else { 555 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 556 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 557 } 558 if (bootverbose) 559 printf("PC873xx irq set to %d\n", ppc->ppc_irq); 560 } else { 561 if (bootverbose) 562 printf("PC873xx sorry, can't change irq setting\n"); 563 } 564 } else { 565 if (bootverbose) 566 printf("PC873xx irq settings are correct\n"); 567 } 568 569 outb(idport, PC873_PCR); 570 pcr = inb(idport + 1); 571 572 if ((ptr & PC873_CFGLOCK) || !chipset_mode) { 573 if (bootverbose) 574 printf("PC873xx %s", (ptr & PC873_CFGLOCK)?"locked":"unlocked"); 575 576 ppc->ppc_avm |= PPB_NIBBLE; 577 if (bootverbose) 578 printf(", NIBBLE"); 579 580 if (pcr & PC873_EPPEN) { 581 ppc->ppc_avm |= PPB_EPP; 582 583 if (bootverbose) 584 printf(", EPP"); 585 586 if (pcr & PC873_EPP19) 587 ppc->ppc_epp = EPP_1_9; 588 else 589 ppc->ppc_epp = EPP_1_7; 590 591 if ((ppc->ppc_model == NS_PC87332) && bootverbose) { 592 outb(idport, PC873_PTR); 593 ptr = inb(idport + 1); 594 if (ptr & PC873_EPPRDIR) 595 printf(", Regular mode"); 596 else 597 printf(", Automatic mode"); 598 } 599 } else if (pcr & PC873_ECPEN) { 600 ppc->ppc_avm |= PPB_ECP; 601 if (bootverbose) 602 printf(", ECP"); 603 604 if (pcr & PC873_ECPCLK) { /* XXX */ 605 ppc->ppc_avm |= PPB_PS2; 606 if (bootverbose) 607 printf(", PS/2"); 608 } 609 } else { 610 outb(idport, PC873_PTR); 611 ptr = inb(idport + 1); 612 if (ptr & PC873_EXTENDED) { 613 ppc->ppc_avm |= PPB_SPP; 614 if (bootverbose) 615 printf(", SPP"); 616 } 617 } 618 } else { 619 if (bootverbose) 620 printf("PC873xx unlocked"); 621 622 if (chipset_mode & PPB_ECP) { 623 if ((chipset_mode & PPB_EPP) && bootverbose) 624 printf(", ECP+EPP not supported"); 625 626 pcr &= ~PC873_EPPEN; 627 pcr |= (PC873_ECPEN | PC873_ECPCLK); /* XXX */ 628 outb(idport + 1, pcr); 629 outb(idport + 1, pcr); 630 631 if (bootverbose) 632 printf(", ECP"); 633 634 } else if (chipset_mode & PPB_EPP) { 635 pcr &= ~(PC873_ECPEN | PC873_ECPCLK); 636 pcr |= (PC873_EPPEN | PC873_EPP19); 637 outb(idport + 1, pcr); 638 outb(idport + 1, pcr); 639 640 ppc->ppc_epp = EPP_1_9; /* XXX */ 641 642 if (bootverbose) 643 printf(", EPP1.9"); 644 645 /* enable automatic direction turnover */ 646 if (ppc->ppc_model == NS_PC87332) { 647 outb(idport, PC873_PTR); 648 ptr = inb(idport + 1); 649 ptr &= ~PC873_EPPRDIR; 650 outb(idport + 1, ptr); 651 outb(idport + 1, ptr); 652 653 if (bootverbose) 654 printf(", Automatic mode"); 655 } 656 } else { 657 pcr &= ~(PC873_ECPEN | PC873_ECPCLK | PC873_EPPEN); 658 outb(idport + 1, pcr); 659 outb(idport + 1, pcr); 660 661 /* configure extended bit in PTR */ 662 outb(idport, PC873_PTR); 663 ptr = inb(idport + 1); 664 665 if (chipset_mode & PPB_PS2) { 666 ptr |= PC873_EXTENDED; 667 668 if (bootverbose) 669 printf(", PS/2"); 670 671 } else { 672 /* default to NIBBLE mode */ 673 ptr &= ~PC873_EXTENDED; 674 675 if (bootverbose) 676 printf(", NIBBLE"); 677 } 678 outb(idport + 1, ptr); 679 outb(idport + 1, ptr); 680 } 681 682 ppc->ppc_avm = chipset_mode; 683 } 684 685 if (bootverbose) 686 printf("\n"); 687 688 ppc->ppc_type = PPC_TYPE_GENERIC; 689 ppc_generic_setmode(ppc, chipset_mode); 690 691 return(chipset_mode); 692 } 693 return(-1); 694 } 695 696 /* 697 * ppc_smc37c66xgt_detect 698 * 699 * SMC FDC37C66xGT configuration. 700 */ 701 static int 702 ppc_smc37c66xgt_detect(struct ppc_data *ppc, int chipset_mode) 703 { 704 int i; 705 u_char r; 706 int type = -1; 707 int csr = SMC66x_CSR; /* initial value is 0x3F0 */ 708 709 int port_address[] = { -1 /* disabled */ , 0x3bc, 0x378, 0x278 }; 710 711 #define cio csr+1 /* config IO port is either 0x3F1 or 0x371 */ 712 713 /* 714 * Detection: enter configuration mode and read CRD register. 715 */ 716 PPC_CONFIG_LOCK(ppc); 717 outb(csr, SMC665_iCODE); 718 outb(csr, SMC665_iCODE); 719 PPC_CONFIG_UNLOCK(ppc); 720 721 outb(csr, 0xd); 722 if (inb(cio) == 0x65) { 723 type = SMC_37C665GT; 724 goto config; 725 } 726 727 for (i = 0; i < 2; i++) { 728 PPC_CONFIG_LOCK(ppc); 729 outb(csr, SMC666_iCODE); 730 outb(csr, SMC666_iCODE); 731 PPC_CONFIG_UNLOCK(ppc); 732 733 outb(csr, 0xd); 734 if (inb(cio) == 0x66) { 735 type = SMC_37C666GT; 736 break; 737 } 738 739 /* Another chance, CSR may be hard-configured to be at 0x370 */ 740 csr = SMC666_CSR; 741 } 742 743 config: 744 /* 745 * If chipset not found, do not continue. 746 */ 747 if (type == -1) { 748 outb(csr, 0xaa); /* end config mode */ 749 return (-1); 750 } 751 752 /* select CR1 */ 753 outb(csr, 0x1); 754 755 /* read the port's address: bits 0 and 1 of CR1 */ 756 r = inb(cio) & SMC_CR1_ADDR; 757 if (port_address[(int)r] != ppc->ppc_base) { 758 outb(csr, 0xaa); /* end config mode */ 759 return (-1); 760 } 761 762 ppc->ppc_model = type; 763 764 /* 765 * CR1 and CR4 registers bits 3 and 0/1 for mode configuration 766 * If SPP mode is detected, try to set ECP+EPP mode 767 */ 768 769 if (bootverbose) { 770 outb(csr, 0x1); 771 device_printf(ppc->ppc_dev, "SMC registers CR1=0x%x", 772 inb(cio) & 0xff); 773 774 outb(csr, 0x4); 775 printf(" CR4=0x%x", inb(cio) & 0xff); 776 } 777 778 /* select CR1 */ 779 outb(csr, 0x1); 780 781 if (!chipset_mode) { 782 /* autodetect mode */ 783 784 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 785 if (type == SMC_37C666GT) { 786 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 787 if (bootverbose) 788 printf(" configuration hardwired, supposing " \ 789 "ECP+EPP SPP"); 790 791 } else 792 if ((inb(cio) & SMC_CR1_MODE) == 0) { 793 /* already in extended parallel port mode, read CR4 */ 794 outb(csr, 0x4); 795 r = (inb(cio) & SMC_CR4_EMODE); 796 797 switch (r) { 798 case SMC_SPP: 799 ppc->ppc_avm |= PPB_SPP; 800 if (bootverbose) 801 printf(" SPP"); 802 break; 803 804 case SMC_EPPSPP: 805 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 806 if (bootverbose) 807 printf(" EPP SPP"); 808 break; 809 810 case SMC_ECP: 811 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 812 if (bootverbose) 813 printf(" ECP SPP"); 814 break; 815 816 case SMC_ECPEPP: 817 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 818 if (bootverbose) 819 printf(" ECP+EPP SPP"); 820 break; 821 } 822 } else { 823 /* not an extended port mode */ 824 ppc->ppc_avm |= PPB_SPP; 825 if (bootverbose) 826 printf(" SPP"); 827 } 828 829 } else { 830 /* mode forced */ 831 ppc->ppc_avm = chipset_mode; 832 833 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 834 if (type == SMC_37C666GT) 835 goto end_detect; 836 837 r = inb(cio); 838 if ((chipset_mode & (PPB_ECP | PPB_EPP)) == 0) { 839 /* do not use ECP when the mode is not forced to */ 840 outb(cio, r | SMC_CR1_MODE); 841 if (bootverbose) 842 printf(" SPP"); 843 } else { 844 /* an extended mode is selected */ 845 outb(cio, r & ~SMC_CR1_MODE); 846 847 /* read CR4 register and reset mode field */ 848 outb(csr, 0x4); 849 r = inb(cio) & ~SMC_CR4_EMODE; 850 851 if (chipset_mode & PPB_ECP) { 852 if (chipset_mode & PPB_EPP) { 853 outb(cio, r | SMC_ECPEPP); 854 if (bootverbose) 855 printf(" ECP+EPP"); 856 } else { 857 outb(cio, r | SMC_ECP); 858 if (bootverbose) 859 printf(" ECP"); 860 } 861 } else { 862 /* PPB_EPP is set */ 863 outb(cio, r | SMC_EPPSPP); 864 if (bootverbose) 865 printf(" EPP SPP"); 866 } 867 } 868 ppc->ppc_avm = chipset_mode; 869 } 870 871 /* set FIFO threshold to 16 */ 872 if (ppc->ppc_avm & PPB_ECP) { 873 /* select CRA */ 874 outb(csr, 0xa); 875 outb(cio, 16); 876 } 877 878 end_detect: 879 880 if (bootverbose) 881 printf ("\n"); 882 883 if (ppc->ppc_avm & PPB_EPP) { 884 /* select CR4 */ 885 outb(csr, 0x4); 886 r = inb(cio); 887 888 /* 889 * Set the EPP protocol... 890 * Low=EPP 1.9 (1284 standard) and High=EPP 1.7 891 */ 892 if (ppc->ppc_epp == EPP_1_9) 893 outb(cio, (r & ~SMC_CR4_EPPTYPE)); 894 else 895 outb(cio, (r | SMC_CR4_EPPTYPE)); 896 } 897 898 outb(csr, 0xaa); /* end config mode */ 899 900 ppc->ppc_type = PPC_TYPE_SMCLIKE; 901 ppc_smclike_setmode(ppc, chipset_mode); 902 903 return (chipset_mode); 904 } 905 906 /* 907 * SMC FDC37C935 configuration 908 * Found on many Alpha machines 909 */ 910 static int 911 ppc_smc37c935_detect(struct ppc_data *ppc, int chipset_mode) 912 { 913 int type = -1; 914 915 PPC_CONFIG_LOCK(ppc); 916 outb(SMC935_CFG, 0x55); /* enter config mode */ 917 outb(SMC935_CFG, 0x55); 918 PPC_CONFIG_UNLOCK(ppc); 919 920 outb(SMC935_IND, SMC935_ID); /* check device id */ 921 if (inb(SMC935_DAT) == 0x2) 922 type = SMC_37C935; 923 924 if (type == -1) { 925 outb(SMC935_CFG, 0xaa); /* exit config mode */ 926 return (-1); 927 } 928 929 ppc->ppc_model = type; 930 931 outb(SMC935_IND, SMC935_LOGDEV); /* select parallel port, */ 932 outb(SMC935_DAT, 3); /* which is logical device 3 */ 933 934 /* set io port base */ 935 outb(SMC935_IND, SMC935_PORTHI); 936 outb(SMC935_DAT, (u_char)((ppc->ppc_base & 0xff00) >> 8)); 937 outb(SMC935_IND, SMC935_PORTLO); 938 outb(SMC935_DAT, (u_char)(ppc->ppc_base & 0xff)); 939 940 if (!chipset_mode) 941 ppc->ppc_avm = PPB_COMPATIBLE; /* default mode */ 942 else { 943 ppc->ppc_avm = chipset_mode; 944 outb(SMC935_IND, SMC935_PPMODE); 945 outb(SMC935_DAT, SMC935_CENT); /* start in compatible mode */ 946 947 /* SPP + EPP or just plain SPP */ 948 if (chipset_mode & (PPB_SPP)) { 949 if (chipset_mode & PPB_EPP) { 950 if (ppc->ppc_epp == EPP_1_9) { 951 outb(SMC935_IND, SMC935_PPMODE); 952 outb(SMC935_DAT, SMC935_EPP19SPP); 953 } 954 if (ppc->ppc_epp == EPP_1_7) { 955 outb(SMC935_IND, SMC935_PPMODE); 956 outb(SMC935_DAT, SMC935_EPP17SPP); 957 } 958 } else { 959 outb(SMC935_IND, SMC935_PPMODE); 960 outb(SMC935_DAT, SMC935_SPP); 961 } 962 } 963 964 /* ECP + EPP or just plain ECP */ 965 if (chipset_mode & PPB_ECP) { 966 if (chipset_mode & PPB_EPP) { 967 if (ppc->ppc_epp == EPP_1_9) { 968 outb(SMC935_IND, SMC935_PPMODE); 969 outb(SMC935_DAT, SMC935_ECPEPP19); 970 } 971 if (ppc->ppc_epp == EPP_1_7) { 972 outb(SMC935_IND, SMC935_PPMODE); 973 outb(SMC935_DAT, SMC935_ECPEPP17); 974 } 975 } else { 976 outb(SMC935_IND, SMC935_PPMODE); 977 outb(SMC935_DAT, SMC935_ECP); 978 } 979 } 980 } 981 982 outb(SMC935_CFG, 0xaa); /* exit config mode */ 983 984 ppc->ppc_type = PPC_TYPE_SMCLIKE; 985 ppc_smclike_setmode(ppc, chipset_mode); 986 987 return (chipset_mode); 988 } 989 990 /* 991 * Winbond W83877F stuff 992 * 993 * EFER: extended function enable register 994 * EFIR: extended function index register 995 * EFDR: extended function data register 996 */ 997 #define efir ((efer == 0x250) ? 0x251 : 0x3f0) 998 #define efdr ((efer == 0x250) ? 0x252 : 0x3f1) 999 1000 static int w83877f_efers[] = { 0x250, 0x3f0, 0x3f0, 0x250 }; 1001 static int w83877f_keys[] = { 0x89, 0x86, 0x87, 0x88 }; 1002 static int w83877f_keyiter[] = { 1, 2, 2, 1 }; 1003 static int w83877f_hefs[] = { WINB_HEFERE, WINB_HEFRAS, WINB_HEFERE | WINB_HEFRAS, 0 }; 1004 1005 static int 1006 ppc_w83877f_detect(struct ppc_data *ppc, int chipset_mode) 1007 { 1008 int i, j, efer; 1009 unsigned char r, hefere, hefras; 1010 1011 for (i = 0; i < 4; i ++) { 1012 /* first try to enable configuration registers */ 1013 efer = w83877f_efers[i]; 1014 1015 /* write the key to the EFER */ 1016 for (j = 0; j < w83877f_keyiter[i]; j ++) 1017 outb (efer, w83877f_keys[i]); 1018 1019 /* then check HEFERE and HEFRAS bits */ 1020 outb (efir, 0x0c); 1021 hefere = inb(efdr) & WINB_HEFERE; 1022 1023 outb (efir, 0x16); 1024 hefras = inb(efdr) & WINB_HEFRAS; 1025 1026 /* 1027 * HEFRAS HEFERE 1028 * 0 1 write 89h to 250h (power-on default) 1029 * 1 0 write 86h twice to 3f0h 1030 * 1 1 write 87h twice to 3f0h 1031 * 0 0 write 88h to 250h 1032 */ 1033 if ((hefere | hefras) == w83877f_hefs[i]) 1034 goto found; 1035 } 1036 1037 return (-1); /* failed */ 1038 1039 found: 1040 /* check base port address - read from CR23 */ 1041 outb(efir, 0x23); 1042 if (ppc->ppc_base != inb(efdr) * 4) /* 4 bytes boundaries */ 1043 return (-1); 1044 1045 /* read CHIP ID from CR9/bits0-3 */ 1046 outb(efir, 0x9); 1047 1048 switch (inb(efdr) & WINB_CHIPID) { 1049 case WINB_W83877F_ID: 1050 ppc->ppc_model = WINB_W83877F; 1051 break; 1052 1053 case WINB_W83877AF_ID: 1054 ppc->ppc_model = WINB_W83877AF; 1055 break; 1056 1057 default: 1058 ppc->ppc_model = WINB_UNKNOWN; 1059 } 1060 1061 if (bootverbose) { 1062 /* dump of registers */ 1063 device_printf(ppc->ppc_dev, "0x%x - ", w83877f_keys[i]); 1064 for (i = 0; i <= 0xd; i ++) { 1065 outb(efir, i); 1066 printf("0x%x ", inb(efdr)); 1067 } 1068 for (i = 0x10; i <= 0x17; i ++) { 1069 outb(efir, i); 1070 printf("0x%x ", inb(efdr)); 1071 } 1072 outb(efir, 0x1e); 1073 printf("0x%x ", inb(efdr)); 1074 for (i = 0x20; i <= 0x29; i ++) { 1075 outb(efir, i); 1076 printf("0x%x ", inb(efdr)); 1077 } 1078 printf("\n"); 1079 } 1080 1081 ppc->ppc_type = PPC_TYPE_GENERIC; 1082 1083 if (!chipset_mode) { 1084 /* autodetect mode */ 1085 1086 /* select CR0 */ 1087 outb(efir, 0x0); 1088 r = inb(efdr) & (WINB_PRTMODS0 | WINB_PRTMODS1); 1089 1090 /* select CR9 */ 1091 outb(efir, 0x9); 1092 r |= (inb(efdr) & WINB_PRTMODS2); 1093 1094 switch (r) { 1095 case WINB_W83757: 1096 if (bootverbose) 1097 device_printf(ppc->ppc_dev, 1098 "W83757 compatible mode\n"); 1099 return (-1); /* generic or SMC-like */ 1100 1101 case WINB_EXTFDC: 1102 case WINB_EXTADP: 1103 case WINB_EXT2FDD: 1104 case WINB_JOYSTICK: 1105 if (bootverbose) 1106 device_printf(ppc->ppc_dev, 1107 "not in parallel port mode\n"); 1108 return (-1); 1109 1110 case (WINB_PARALLEL | WINB_EPP_SPP): 1111 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 1112 if (bootverbose) 1113 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1114 break; 1115 1116 case (WINB_PARALLEL | WINB_ECP): 1117 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 1118 if (bootverbose) 1119 device_printf(ppc->ppc_dev, "ECP SPP\n"); 1120 break; 1121 1122 case (WINB_PARALLEL | WINB_ECP_EPP): 1123 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 1124 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1125 1126 if (bootverbose) 1127 device_printf(ppc->ppc_dev, "ECP+EPP SPP\n"); 1128 break; 1129 default: 1130 printf("%s: unknown case (0x%x)!\n", __func__, r); 1131 } 1132 1133 } else { 1134 /* mode forced */ 1135 1136 /* select CR9 and set PRTMODS2 bit */ 1137 outb(efir, 0x9); 1138 outb(efdr, inb(efdr) & ~WINB_PRTMODS2); 1139 1140 /* select CR0 and reset PRTMODSx bits */ 1141 outb(efir, 0x0); 1142 outb(efdr, inb(efdr) & ~(WINB_PRTMODS0 | WINB_PRTMODS1)); 1143 1144 if (chipset_mode & PPB_ECP) { 1145 if (chipset_mode & PPB_EPP) { 1146 outb(efdr, inb(efdr) | WINB_ECP_EPP); 1147 if (bootverbose) 1148 device_printf(ppc->ppc_dev, 1149 "ECP+EPP\n"); 1150 1151 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1152 1153 } else { 1154 outb(efdr, inb(efdr) | WINB_ECP); 1155 if (bootverbose) 1156 device_printf(ppc->ppc_dev, "ECP\n"); 1157 } 1158 } else { 1159 /* select EPP_SPP otherwise */ 1160 outb(efdr, inb(efdr) | WINB_EPP_SPP); 1161 if (bootverbose) 1162 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1163 } 1164 ppc->ppc_avm = chipset_mode; 1165 } 1166 1167 /* exit configuration mode */ 1168 outb(efer, 0xaa); 1169 1170 switch (ppc->ppc_type) { 1171 case PPC_TYPE_SMCLIKE: 1172 ppc_smclike_setmode(ppc, chipset_mode); 1173 break; 1174 default: 1175 ppc_generic_setmode(ppc, chipset_mode); 1176 break; 1177 } 1178 1179 return (chipset_mode); 1180 } 1181 #endif 1182 1183 /* 1184 * ppc_generic_detect 1185 */ 1186 static int 1187 ppc_generic_detect(struct ppc_data *ppc, int chipset_mode) 1188 { 1189 /* default to generic */ 1190 ppc->ppc_type = PPC_TYPE_GENERIC; 1191 1192 if (bootverbose) 1193 device_printf(ppc->ppc_dev, "SPP"); 1194 1195 /* first, check for ECP */ 1196 w_ecr(ppc, PPC_ECR_PS2); 1197 if ((r_ecr(ppc) & 0xe0) == PPC_ECR_PS2) { 1198 ppc->ppc_dtm |= PPB_ECP | PPB_SPP; 1199 if (bootverbose) 1200 printf(" ECP "); 1201 1202 /* search for SMC style ECP+EPP mode */ 1203 w_ecr(ppc, PPC_ECR_EPP); 1204 } 1205 1206 /* try to reset EPP timeout bit */ 1207 if (ppc_check_epp_timeout(ppc)) { 1208 ppc->ppc_dtm |= PPB_EPP; 1209 1210 if (ppc->ppc_dtm & PPB_ECP) { 1211 /* SMC like chipset found */ 1212 ppc->ppc_model = SMC_LIKE; 1213 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1214 1215 if (bootverbose) 1216 printf(" ECP+EPP"); 1217 } else { 1218 if (bootverbose) 1219 printf(" EPP"); 1220 } 1221 } else { 1222 /* restore to standard mode */ 1223 w_ecr(ppc, PPC_ECR_STD); 1224 } 1225 1226 /* XXX try to detect NIBBLE and PS2 modes */ 1227 ppc->ppc_dtm |= PPB_NIBBLE; 1228 1229 if (chipset_mode) 1230 ppc->ppc_avm = chipset_mode; 1231 else 1232 ppc->ppc_avm = ppc->ppc_dtm; 1233 1234 if (bootverbose) 1235 printf("\n"); 1236 1237 switch (ppc->ppc_type) { 1238 case PPC_TYPE_SMCLIKE: 1239 ppc_smclike_setmode(ppc, chipset_mode); 1240 break; 1241 default: 1242 ppc_generic_setmode(ppc, chipset_mode); 1243 break; 1244 } 1245 1246 return (chipset_mode); 1247 } 1248 1249 /* 1250 * ppc_detect() 1251 * 1252 * mode is the mode suggested at boot 1253 */ 1254 static int 1255 ppc_detect(struct ppc_data *ppc, int chipset_mode) { 1256 #ifdef PPC_PROBE_CHIPSET 1257 int i, mode; 1258 1259 /* list of supported chipsets */ 1260 int (*chipset_detect[])(struct ppc_data *, int) = { 1261 ppc_pc873xx_detect, 1262 ppc_smc37c66xgt_detect, 1263 ppc_w83877f_detect, 1264 ppc_smc37c935_detect, 1265 ppc_generic_detect, 1266 NULL 1267 }; 1268 #endif 1269 1270 /* if can't find the port and mode not forced return error */ 1271 if (!ppc_detect_port(ppc) && chipset_mode == 0) 1272 return (EIO); /* failed, port not present */ 1273 1274 /* assume centronics compatible mode is supported */ 1275 ppc->ppc_avm = PPB_COMPATIBLE; 1276 1277 #ifdef PPC_PROBE_CHIPSET 1278 /* we have to differenciate available chipset modes, 1279 * chipset running modes and IEEE-1284 operating modes 1280 * 1281 * after detection, the port must support running in compatible mode 1282 */ 1283 if (ppc->ppc_flags & 0x40) { 1284 if (bootverbose) 1285 printf("ppc: chipset forced to generic\n"); 1286 #endif 1287 1288 ppc->ppc_mode = ppc_generic_detect(ppc, chipset_mode); 1289 1290 #ifdef PPC_PROBE_CHIPSET 1291 } else { 1292 for (i=0; chipset_detect[i] != NULL; i++) { 1293 if ((mode = chipset_detect[i](ppc, chipset_mode)) != -1) { 1294 ppc->ppc_mode = mode; 1295 break; 1296 } 1297 } 1298 } 1299 #endif 1300 1301 /* configure/detect ECP FIFO */ 1302 if ((ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_flags & 0x80)) 1303 ppc_detect_fifo(ppc); 1304 1305 return (0); 1306 } 1307 1308 /* 1309 * ppc_exec_microseq() 1310 * 1311 * Execute a microsequence. 1312 * Microsequence mechanism is supposed to handle fast I/O operations. 1313 */ 1314 int 1315 ppc_exec_microseq(device_t dev, struct ppb_microseq **p_msq) 1316 { 1317 struct ppc_data *ppc = DEVTOSOFTC(dev); 1318 struct ppb_microseq *mi; 1319 char cc, *p; 1320 int i, iter, len; 1321 int error; 1322 1323 int reg; 1324 char mask; 1325 int accum = 0; 1326 char *ptr = NULL; 1327 1328 struct ppb_microseq *stack = NULL; 1329 1330 /* microsequence registers are equivalent to PC-like port registers */ 1331 1332 #define r_reg(reg,ppc) (bus_read_1((ppc)->res_ioport, reg)) 1333 #define w_reg(reg, ppc, byte) (bus_write_1((ppc)->res_ioport, reg, byte)) 1334 1335 #define INCR_PC (mi ++) /* increment program counter */ 1336 1337 PPC_ASSERT_LOCKED(ppc); 1338 mi = *p_msq; 1339 for (;;) { 1340 switch (mi->opcode) { 1341 case MS_OP_RSET: 1342 cc = r_reg(mi->arg[0].i, ppc); 1343 cc &= (char)mi->arg[2].i; /* clear mask */ 1344 cc |= (char)mi->arg[1].i; /* assert mask */ 1345 w_reg(mi->arg[0].i, ppc, cc); 1346 INCR_PC; 1347 break; 1348 1349 case MS_OP_RASSERT_P: 1350 reg = mi->arg[1].i; 1351 ptr = ppc->ppc_ptr; 1352 1353 if ((len = mi->arg[0].i) == MS_ACCUM) { 1354 accum = ppc->ppc_accum; 1355 for (; accum; accum--) 1356 w_reg(reg, ppc, *ptr++); 1357 ppc->ppc_accum = accum; 1358 } else 1359 for (i=0; i<len; i++) 1360 w_reg(reg, ppc, *ptr++); 1361 ppc->ppc_ptr = ptr; 1362 1363 INCR_PC; 1364 break; 1365 1366 case MS_OP_RFETCH_P: 1367 reg = mi->arg[1].i; 1368 mask = (char)mi->arg[2].i; 1369 ptr = ppc->ppc_ptr; 1370 1371 if ((len = mi->arg[0].i) == MS_ACCUM) { 1372 accum = ppc->ppc_accum; 1373 for (; accum; accum--) 1374 *ptr++ = r_reg(reg, ppc) & mask; 1375 ppc->ppc_accum = accum; 1376 } else 1377 for (i=0; i<len; i++) 1378 *ptr++ = r_reg(reg, ppc) & mask; 1379 ppc->ppc_ptr = ptr; 1380 1381 INCR_PC; 1382 break; 1383 1384 case MS_OP_RFETCH: 1385 *((char *) mi->arg[2].p) = r_reg(mi->arg[0].i, ppc) & 1386 (char)mi->arg[1].i; 1387 INCR_PC; 1388 break; 1389 1390 case MS_OP_RASSERT: 1391 case MS_OP_DELAY: 1392 1393 /* let's suppose the next instr. is the same */ 1394 prefetch: 1395 for (;mi->opcode == MS_OP_RASSERT; INCR_PC) 1396 w_reg(mi->arg[0].i, ppc, (char)mi->arg[1].i); 1397 1398 if (mi->opcode == MS_OP_DELAY) { 1399 DELAY(mi->arg[0].i); 1400 INCR_PC; 1401 goto prefetch; 1402 } 1403 break; 1404 1405 case MS_OP_ADELAY: 1406 if (mi->arg[0].i) { 1407 PPC_UNLOCK(ppc); 1408 pause("ppbdelay", mi->arg[0].i * (hz/1000)); 1409 PPC_LOCK(ppc); 1410 } 1411 INCR_PC; 1412 break; 1413 1414 case MS_OP_TRIG: 1415 reg = mi->arg[0].i; 1416 iter = mi->arg[1].i; 1417 p = (char *)mi->arg[2].p; 1418 1419 /* XXX delay limited to 255 us */ 1420 for (i=0; i<iter; i++) { 1421 w_reg(reg, ppc, *p++); 1422 DELAY((unsigned char)*p++); 1423 } 1424 INCR_PC; 1425 break; 1426 1427 case MS_OP_SET: 1428 ppc->ppc_accum = mi->arg[0].i; 1429 INCR_PC; 1430 break; 1431 1432 case MS_OP_DBRA: 1433 if (--ppc->ppc_accum > 0) 1434 mi += mi->arg[0].i; 1435 INCR_PC; 1436 break; 1437 1438 case MS_OP_BRSET: 1439 cc = r_str(ppc); 1440 if ((cc & (char)mi->arg[0].i) == (char)mi->arg[0].i) 1441 mi += mi->arg[1].i; 1442 INCR_PC; 1443 break; 1444 1445 case MS_OP_BRCLEAR: 1446 cc = r_str(ppc); 1447 if ((cc & (char)mi->arg[0].i) == 0) 1448 mi += mi->arg[1].i; 1449 INCR_PC; 1450 break; 1451 1452 case MS_OP_BRSTAT: 1453 cc = r_str(ppc); 1454 if ((cc & ((char)mi->arg[0].i | (char)mi->arg[1].i)) == 1455 (char)mi->arg[0].i) 1456 mi += mi->arg[2].i; 1457 INCR_PC; 1458 break; 1459 1460 case MS_OP_C_CALL: 1461 /* 1462 * If the C call returns !0 then end the microseq. 1463 * The current state of ptr is passed to the C function 1464 */ 1465 if ((error = mi->arg[0].f(mi->arg[1].p, ppc->ppc_ptr))) 1466 return (error); 1467 1468 INCR_PC; 1469 break; 1470 1471 case MS_OP_PTR: 1472 ppc->ppc_ptr = (char *)mi->arg[0].p; 1473 INCR_PC; 1474 break; 1475 1476 case MS_OP_CALL: 1477 if (stack) 1478 panic("%s: too much calls", __func__); 1479 1480 if (mi->arg[0].p) { 1481 /* store the state of the actual 1482 * microsequence 1483 */ 1484 stack = mi; 1485 1486 /* jump to the new microsequence */ 1487 mi = (struct ppb_microseq *)mi->arg[0].p; 1488 } else 1489 INCR_PC; 1490 1491 break; 1492 1493 case MS_OP_SUBRET: 1494 /* retrieve microseq and pc state before the call */ 1495 mi = stack; 1496 1497 /* reset the stack */ 1498 stack = NULL; 1499 1500 /* XXX return code */ 1501 1502 INCR_PC; 1503 break; 1504 1505 case MS_OP_PUT: 1506 case MS_OP_GET: 1507 case MS_OP_RET: 1508 /* can't return to ppb level during the execution 1509 * of a submicrosequence */ 1510 if (stack) 1511 panic("%s: can't return to ppb level", 1512 __func__); 1513 1514 /* update pc for ppb level of execution */ 1515 *p_msq = mi; 1516 1517 /* return to ppb level of execution */ 1518 return (0); 1519 1520 default: 1521 panic("%s: unknown microsequence opcode 0x%x", 1522 __func__, mi->opcode); 1523 } 1524 } 1525 1526 /* unreached */ 1527 } 1528 1529 static void 1530 ppcintr(void *arg) 1531 { 1532 struct ppc_data *ppc = arg; 1533 u_char ctr, ecr, str; 1534 1535 /* 1536 * If we have any child interrupt handlers registered, let 1537 * them handle this interrupt. 1538 * 1539 * XXX: If DMA is in progress should we just complete that w/o 1540 * doing this? 1541 */ 1542 PPC_LOCK(ppc); 1543 if (ppc->ppc_intr_hook != NULL && 1544 ppc->ppc_intr_hook(ppc->ppc_intr_arg) == 0) { 1545 PPC_UNLOCK(ppc); 1546 return; 1547 } 1548 1549 str = r_str(ppc); 1550 ctr = r_ctr(ppc); 1551 ecr = r_ecr(ppc); 1552 1553 #if defined(PPC_DEBUG) && PPC_DEBUG > 1 1554 printf("![%x/%x/%x]", ctr, ecr, str); 1555 #endif 1556 1557 /* don't use ecp mode with IRQENABLE set */ 1558 if (ctr & IRQENABLE) { 1559 PPC_UNLOCK(ppc); 1560 return; 1561 } 1562 1563 /* interrupts are generated by nFault signal 1564 * only in ECP mode */ 1565 if ((str & nFAULT) && (ppc->ppc_mode & PPB_ECP)) { 1566 /* check if ppc driver has programmed the 1567 * nFault interrupt */ 1568 if (ppc->ppc_irqstat & PPC_IRQ_nFAULT) { 1569 w_ecr(ppc, ecr | PPC_nFAULT_INTR); 1570 ppc->ppc_irqstat &= ~PPC_IRQ_nFAULT; 1571 } else { 1572 /* shall be handled by underlying layers XXX */ 1573 PPC_UNLOCK(ppc); 1574 return; 1575 } 1576 } 1577 1578 if (ppc->ppc_irqstat & PPC_IRQ_DMA) { 1579 /* disable interrupts (should be done by hardware though) */ 1580 w_ecr(ppc, ecr | PPC_SERVICE_INTR); 1581 ppc->ppc_irqstat &= ~PPC_IRQ_DMA; 1582 ecr = r_ecr(ppc); 1583 1584 /* check if DMA completed */ 1585 if ((ppc->ppc_avm & PPB_ECP) && (ecr & PPC_ENABLE_DMA)) { 1586 #ifdef PPC_DEBUG 1587 printf("a"); 1588 #endif 1589 /* stop DMA */ 1590 w_ecr(ppc, ecr & ~PPC_ENABLE_DMA); 1591 ecr = r_ecr(ppc); 1592 1593 if (ppc->ppc_dmastat == PPC_DMA_STARTED) { 1594 #ifdef PPC_DEBUG 1595 printf("d"); 1596 #endif 1597 ppc->ppc_dmadone(ppc); 1598 ppc->ppc_dmastat = PPC_DMA_COMPLETE; 1599 1600 /* wakeup the waiting process */ 1601 wakeup(ppc); 1602 } 1603 } 1604 } else if (ppc->ppc_irqstat & PPC_IRQ_FIFO) { 1605 /* classic interrupt I/O */ 1606 ppc->ppc_irqstat &= ~PPC_IRQ_FIFO; 1607 } 1608 PPC_UNLOCK(ppc); 1609 1610 return; 1611 } 1612 1613 int 1614 ppc_read(device_t dev, char *buf, int len, int mode) 1615 { 1616 return (EINVAL); 1617 } 1618 1619 int 1620 ppc_write(device_t dev, char *buf, int len, int how) 1621 { 1622 return (EINVAL); 1623 } 1624 1625 int 1626 ppc_reset_epp(device_t dev) 1627 { 1628 struct ppc_data *ppc = DEVTOSOFTC(dev); 1629 1630 PPC_ASSERT_LOCKED(ppc); 1631 ppc_reset_epp_timeout(ppc); 1632 1633 return 0; 1634 } 1635 1636 int 1637 ppc_setmode(device_t dev, int mode) 1638 { 1639 struct ppc_data *ppc = DEVTOSOFTC(dev); 1640 1641 PPC_ASSERT_LOCKED(ppc); 1642 switch (ppc->ppc_type) { 1643 case PPC_TYPE_SMCLIKE: 1644 return (ppc_smclike_setmode(ppc, mode)); 1645 break; 1646 1647 case PPC_TYPE_GENERIC: 1648 default: 1649 return (ppc_generic_setmode(ppc, mode)); 1650 break; 1651 } 1652 1653 /* not reached */ 1654 return (ENXIO); 1655 } 1656 1657 int 1658 ppc_probe(device_t dev, int rid) 1659 { 1660 #ifdef __i386__ 1661 static short next_bios_ppc = 0; 1662 #endif 1663 struct ppc_data *ppc; 1664 int error; 1665 rman_res_t port; 1666 1667 /* 1668 * Allocate the ppc_data structure. 1669 */ 1670 ppc = DEVTOSOFTC(dev); 1671 bzero(ppc, sizeof(struct ppc_data)); 1672 1673 ppc->rid_ioport = rid; 1674 1675 /* retrieve ISA parameters */ 1676 error = bus_get_resource(dev, SYS_RES_IOPORT, rid, &port, NULL); 1677 1678 #ifdef __i386__ 1679 /* 1680 * If port not specified, use bios list. 1681 */ 1682 if (error) { 1683 if ((next_bios_ppc < BIOS_MAX_PPC) && 1684 (*(BIOS_PORTS + next_bios_ppc) != 0)) { 1685 port = *(BIOS_PORTS + next_bios_ppc++); 1686 if (bootverbose) 1687 device_printf(dev, 1688 "parallel port found at 0x%jx\n", port); 1689 } else { 1690 device_printf(dev, "parallel port not found.\n"); 1691 return (ENXIO); 1692 } 1693 bus_set_resource(dev, SYS_RES_IOPORT, rid, port, 1694 IO_LPTSIZE_EXTENDED); 1695 } 1696 #endif 1697 1698 /* IO port is mandatory */ 1699 1700 /* Try "extended" IO port range...*/ 1701 ppc->res_ioport = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, 1702 &ppc->rid_ioport, 1703 IO_LPTSIZE_EXTENDED, 1704 RF_ACTIVE); 1705 1706 if (ppc->res_ioport != 0) { 1707 if (bootverbose) 1708 device_printf(dev, "using extended I/O port range\n"); 1709 } else { 1710 /* Failed? If so, then try the "normal" IO port range... */ 1711 ppc->res_ioport = bus_alloc_resource_anywhere(dev, 1712 SYS_RES_IOPORT, 1713 &ppc->rid_ioport, 1714 IO_LPTSIZE_NORMAL, 1715 RF_ACTIVE); 1716 if (ppc->res_ioport != 0) { 1717 if (bootverbose) 1718 device_printf(dev, "using normal I/O port range\n"); 1719 } else { 1720 if (bootverbose) 1721 device_printf(dev, "cannot reserve I/O port range\n"); 1722 goto error; 1723 } 1724 } 1725 1726 ppc->ppc_base = rman_get_start(ppc->res_ioport); 1727 1728 ppc->ppc_flags = device_get_flags(dev); 1729 1730 if (!(ppc->ppc_flags & 0x20)) { 1731 ppc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 1732 &ppc->rid_irq, 1733 RF_SHAREABLE); 1734 ppc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ, 1735 &ppc->rid_drq, 1736 RF_ACTIVE); 1737 } 1738 1739 if (ppc->res_irq) 1740 ppc->ppc_irq = rman_get_start(ppc->res_irq); 1741 if (ppc->res_drq) 1742 ppc->ppc_dmachan = rman_get_start(ppc->res_drq); 1743 1744 ppc->ppc_dev = dev; 1745 ppc->ppc_model = GENERIC; 1746 1747 ppc->ppc_mode = PPB_COMPATIBLE; 1748 ppc->ppc_epp = (ppc->ppc_flags & 0x10) >> 4; 1749 1750 ppc->ppc_type = PPC_TYPE_GENERIC; 1751 1752 /* 1753 * Try to detect the chipset and its mode. 1754 */ 1755 if (ppc_detect(ppc, ppc->ppc_flags & 0xf)) 1756 goto error; 1757 1758 return (0); 1759 1760 error: 1761 if (ppc->res_irq != 0) { 1762 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1763 ppc->res_irq); 1764 } 1765 if (ppc->res_ioport != 0) { 1766 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1767 ppc->res_ioport); 1768 } 1769 if (ppc->res_drq != 0) { 1770 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1771 ppc->res_drq); 1772 } 1773 return (ENXIO); 1774 } 1775 1776 int 1777 ppc_attach(device_t dev) 1778 { 1779 struct ppc_data *ppc = DEVTOSOFTC(dev); 1780 int error; 1781 1782 mtx_init(&ppc->ppc_lock, device_get_nameunit(dev), "ppc", MTX_DEF); 1783 1784 device_printf(dev, "%s chipset (%s) in %s mode%s\n", 1785 ppc_models[ppc->ppc_model], ppc_avms[ppc->ppc_avm], 1786 ppc_modes[ppc->ppc_mode], (PPB_IS_EPP(ppc->ppc_mode)) ? 1787 ppc_epp_protocol[ppc->ppc_epp] : ""); 1788 1789 if (ppc->ppc_fifo) 1790 device_printf(dev, "FIFO with %d/%d/%d bytes threshold\n", 1791 ppc->ppc_fifo, ppc->ppc_wthr, ppc->ppc_rthr); 1792 1793 if (ppc->res_irq) { 1794 /* default to the tty mask for registration */ /* XXX */ 1795 error = bus_setup_intr(dev, ppc->res_irq, INTR_TYPE_TTY | 1796 INTR_MPSAFE, NULL, ppcintr, ppc, &ppc->intr_cookie); 1797 if (error) { 1798 device_printf(dev, 1799 "failed to register interrupt handler: %d\n", 1800 error); 1801 mtx_destroy(&ppc->ppc_lock); 1802 return (error); 1803 } 1804 } 1805 1806 /* add ppbus as a child of this isa to parallel bridge */ 1807 ppc->ppbus = device_add_child(dev, "ppbus", -1); 1808 1809 /* 1810 * Probe the ppbus and attach devices found. 1811 */ 1812 device_probe_and_attach(ppc->ppbus); 1813 1814 return (0); 1815 } 1816 1817 int 1818 ppc_detach(device_t dev) 1819 { 1820 struct ppc_data *ppc = DEVTOSOFTC(dev); 1821 1822 if (ppc->res_irq == 0) { 1823 return (ENXIO); 1824 } 1825 1826 /* detach & delete all children */ 1827 device_delete_children(dev); 1828 1829 if (ppc->res_irq != 0) { 1830 bus_teardown_intr(dev, ppc->res_irq, ppc->intr_cookie); 1831 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1832 ppc->res_irq); 1833 } 1834 if (ppc->res_ioport != 0) { 1835 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1836 ppc->res_ioport); 1837 } 1838 if (ppc->res_drq != 0) { 1839 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1840 ppc->res_drq); 1841 } 1842 1843 mtx_destroy(&ppc->ppc_lock); 1844 1845 return (0); 1846 } 1847 1848 u_char 1849 ppc_io(device_t ppcdev, int iop, u_char *addr, int cnt, u_char byte) 1850 { 1851 struct ppc_data *ppc = DEVTOSOFTC(ppcdev); 1852 1853 PPC_ASSERT_LOCKED(ppc); 1854 switch (iop) { 1855 case PPB_OUTSB_EPP: 1856 bus_write_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1857 break; 1858 case PPB_OUTSW_EPP: 1859 bus_write_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1860 break; 1861 case PPB_OUTSL_EPP: 1862 bus_write_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1863 break; 1864 case PPB_INSB_EPP: 1865 bus_read_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1866 break; 1867 case PPB_INSW_EPP: 1868 bus_read_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1869 break; 1870 case PPB_INSL_EPP: 1871 bus_read_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1872 break; 1873 case PPB_RDTR: 1874 return (r_dtr(ppc)); 1875 case PPB_RSTR: 1876 return (r_str(ppc)); 1877 case PPB_RCTR: 1878 return (r_ctr(ppc)); 1879 case PPB_REPP_A: 1880 return (r_epp_A(ppc)); 1881 case PPB_REPP_D: 1882 return (r_epp_D(ppc)); 1883 case PPB_RECR: 1884 return (r_ecr(ppc)); 1885 case PPB_RFIFO: 1886 return (r_fifo(ppc)); 1887 case PPB_WDTR: 1888 w_dtr(ppc, byte); 1889 break; 1890 case PPB_WSTR: 1891 w_str(ppc, byte); 1892 break; 1893 case PPB_WCTR: 1894 w_ctr(ppc, byte); 1895 break; 1896 case PPB_WEPP_A: 1897 w_epp_A(ppc, byte); 1898 break; 1899 case PPB_WEPP_D: 1900 w_epp_D(ppc, byte); 1901 break; 1902 case PPB_WECR: 1903 w_ecr(ppc, byte); 1904 break; 1905 case PPB_WFIFO: 1906 w_fifo(ppc, byte); 1907 break; 1908 default: 1909 panic("%s: unknown I/O operation", __func__); 1910 break; 1911 } 1912 1913 return (0); /* not significative */ 1914 } 1915 1916 int 1917 ppc_read_ivar(device_t bus, device_t dev, int index, uintptr_t *val) 1918 { 1919 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1920 1921 switch (index) { 1922 case PPC_IVAR_EPP_PROTO: 1923 PPC_ASSERT_LOCKED(ppc); 1924 *val = (u_long)ppc->ppc_epp; 1925 break; 1926 case PPC_IVAR_LOCK: 1927 *val = (uintptr_t)&ppc->ppc_lock; 1928 break; 1929 default: 1930 return (ENOENT); 1931 } 1932 1933 return (0); 1934 } 1935 1936 int 1937 ppc_write_ivar(device_t bus, device_t dev, int index, uintptr_t val) 1938 { 1939 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1940 1941 switch (index) { 1942 case PPC_IVAR_INTR_HANDLER: 1943 PPC_ASSERT_LOCKED(ppc); 1944 if (dev != ppc->ppbus) 1945 return (EINVAL); 1946 if (val == 0) { 1947 ppc->ppc_intr_hook = NULL; 1948 break; 1949 } 1950 if (ppc->ppc_intr_hook != NULL) 1951 return (EBUSY); 1952 ppc->ppc_intr_hook = (void *)val; 1953 ppc->ppc_intr_arg = device_get_softc(dev); 1954 break; 1955 default: 1956 return (ENOENT); 1957 } 1958 1959 return (0); 1960 } 1961 1962 /* 1963 * We allow child devices to allocate an IRQ resource at rid 0 for their 1964 * interrupt handlers. 1965 */ 1966 struct resource * 1967 ppc_alloc_resource(device_t bus, device_t child, int type, int *rid, 1968 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1969 { 1970 struct ppc_data *ppc = DEVTOSOFTC(bus); 1971 1972 switch (type) { 1973 case SYS_RES_IRQ: 1974 if (*rid == 0) 1975 return (ppc->res_irq); 1976 break; 1977 } 1978 return (NULL); 1979 } 1980 1981 int 1982 ppc_release_resource(device_t bus, device_t child, int type, int rid, 1983 struct resource *r) 1984 { 1985 #ifdef INVARIANTS 1986 struct ppc_data *ppc = DEVTOSOFTC(bus); 1987 #endif 1988 1989 switch (type) { 1990 case SYS_RES_IRQ: 1991 if (rid == 0) { 1992 KASSERT(r == ppc->res_irq, 1993 ("ppc child IRQ resource mismatch")); 1994 return (0); 1995 } 1996 break; 1997 } 1998 return (EINVAL); 1999 } 2000 2001 MODULE_DEPEND(ppc, ppbus, 1, 1, 1); 2002