1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2000 Michael Smith 5 * Copyright (c) 2000-2001 Scott Long 6 * Copyright (c) 2000 BSDi 7 * Copyright (c) 2001 Adaptec, Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * $FreeBSD$ 32 */ 33 34 /* 35 * Data structures defining the interface between the driver and the Adaptec 36 * 'FSA' adapters. Note that many field names and comments here are taken 37 * verbatim from the Adaptec driver source in order to make comparing the 38 * two slightly easier. 39 */ 40 41 /* 42 * Misc. magic numbers. 43 */ 44 #define AAC_MAX_CONTAINERS 64 45 #define AAC_BLOCK_SIZE 512 46 47 /* 48 * Communications interface. 49 * 50 * Where datastructure layouts are closely parallel to the Adaptec sample code, 51 * retain their naming conventions (for now) to aid in cross-referencing. 52 */ 53 54 /* 55 * We establish 4 command queues and matching response queues. Queues must 56 * be 16-byte aligned, and are sized as follows: 57 */ 58 #define AAC_HOST_NORM_CMD_ENTRIES 8 /* command adapter->host, 59 * normal priority */ 60 #define AAC_HOST_HIGH_CMD_ENTRIES 4 /* command adapter->host, 61 * high priority */ 62 #define AAC_ADAP_NORM_CMD_ENTRIES 512 /* command host->adapter, 63 * normal priority */ 64 #define AAC_ADAP_HIGH_CMD_ENTRIES 4 /* command host->adapter, 65 * high priority */ 66 #define AAC_HOST_NORM_RESP_ENTRIES 512 /* response, adapter->host, 67 * normal priority */ 68 #define AAC_HOST_HIGH_RESP_ENTRIES 4 /* response, adapter->host, 69 * high priority */ 70 #define AAC_ADAP_NORM_RESP_ENTRIES 8 /* response, host->adapter, 71 * normal priority */ 72 #define AAC_ADAP_HIGH_RESP_ENTRIES 4 /* response, host->adapter, 73 * high priority */ 74 75 #define AAC_TOTALQ_LENGTH (AAC_HOST_HIGH_CMD_ENTRIES + \ 76 AAC_HOST_NORM_CMD_ENTRIES + \ 77 AAC_ADAP_HIGH_CMD_ENTRIES + \ 78 AAC_ADAP_NORM_CMD_ENTRIES + \ 79 AAC_HOST_HIGH_RESP_ENTRIES + \ 80 AAC_HOST_NORM_RESP_ENTRIES + \ 81 AAC_ADAP_HIGH_RESP_ENTRIES + \ 82 AAC_ADAP_NORM_RESP_ENTRIES) 83 #define AAC_QUEUE_COUNT 8 84 #define AAC_QUEUE_ALIGN 16 85 86 struct aac_queue_entry { 87 u_int32_t aq_fib_size; /* FIB size in bytes */ 88 u_int32_t aq_fib_addr; /* receiver-space address of the FIB */ 89 } __packed; 90 91 #define AAC_PRODUCER_INDEX 0 92 #define AAC_CONSUMER_INDEX 1 93 94 /* 95 * Table of queue indices and queues used to communicate with the 96 * controller. This structure must be aligned to AAC_QUEUE_ALIGN 97 */ 98 struct aac_queue_table { 99 /* queue consumer/producer indexes (layout mandated by adapter) */ 100 u_int32_t qt_qindex[AAC_QUEUE_COUNT][2]; 101 102 /* queue entry structures (layout mandated by adapter) */ 103 struct aac_queue_entry qt_HostNormCmdQueue [AAC_HOST_NORM_CMD_ENTRIES]; 104 struct aac_queue_entry qt_HostHighCmdQueue [AAC_HOST_HIGH_CMD_ENTRIES]; 105 struct aac_queue_entry qt_AdapNormCmdQueue [AAC_ADAP_NORM_CMD_ENTRIES]; 106 struct aac_queue_entry qt_AdapHighCmdQueue [AAC_ADAP_HIGH_CMD_ENTRIES]; 107 struct aac_queue_entry qt_HostNormRespQueue[AAC_HOST_NORM_RESP_ENTRIES]; 108 struct aac_queue_entry qt_HostHighRespQueue[AAC_HOST_HIGH_RESP_ENTRIES]; 109 struct aac_queue_entry qt_AdapNormRespQueue[AAC_ADAP_NORM_RESP_ENTRIES]; 110 struct aac_queue_entry qt_AdapHighRespQueue[AAC_ADAP_HIGH_RESP_ENTRIES]; 111 } __packed; 112 113 /* 114 * Queue names 115 * 116 * Note that we base these at 0 in order to use them as array indices. Adaptec 117 * used base 1 for some unknown reason, and sorted them in a different order. 118 */ 119 #define AAC_HOST_NORM_CMD_QUEUE 0 120 #define AAC_HOST_HIGH_CMD_QUEUE 1 121 #define AAC_ADAP_NORM_CMD_QUEUE 2 122 #define AAC_ADAP_HIGH_CMD_QUEUE 3 123 #define AAC_HOST_NORM_RESP_QUEUE 4 124 #define AAC_HOST_HIGH_RESP_QUEUE 5 125 #define AAC_ADAP_NORM_RESP_QUEUE 6 126 #define AAC_ADAP_HIGH_RESP_QUEUE 7 127 128 /* 129 * List structure used to chain FIBs (used by the adapter - we hang FIBs off 130 * our private command structure and don't touch these) 131 */ 132 struct aac_fib_list_entry { 133 u_int32_t Flink; 134 u_int32_t Blink; 135 } __packed; 136 137 /* 138 * FIB (FSA Interface Block?); this is the datastructure passed between the host 139 * and adapter. 140 */ 141 struct aac_fib_header { 142 u_int32_t XferState; 143 u_int16_t Command; 144 u_int8_t StructType; 145 u_int8_t Flags; 146 u_int16_t Size; 147 u_int16_t SenderSize; 148 u_int32_t SenderFibAddress; 149 u_int32_t ReceiverFibAddress; 150 u_int32_t SenderData; 151 union { 152 struct { 153 u_int32_t ReceiverTimeStart; 154 u_int32_t ReceiverTimeDone; 155 } _s; 156 struct aac_fib_list_entry FibLinks; 157 } _u; 158 } __packed; 159 160 #define AAC_FIB_DATASIZE (512 - sizeof(struct aac_fib_header)) 161 162 struct aac_fib { 163 struct aac_fib_header Header; 164 u_int8_t data[AAC_FIB_DATASIZE]; 165 } __packed; 166 167 /* 168 * FIB commands 169 */ 170 typedef enum { 171 TestCommandResponse = 1, 172 TestAdapterCommand = 2, 173 174 /* lowlevel and comm commands */ 175 LastTestCommand = 100, 176 ReinitHostNormCommandQueue = 101, 177 ReinitHostHighCommandQueue = 102, 178 ReinitHostHighRespQueue = 103, 179 ReinitHostNormRespQueue = 104, 180 ReinitAdapNormCommandQueue = 105, 181 ReinitAdapHighCommandQueue = 107, 182 ReinitAdapHighRespQueue = 108, 183 ReinitAdapNormRespQueue = 109, 184 InterfaceShutdown = 110, 185 DmaCommandFib = 120, 186 StartProfile = 121, 187 TermProfile = 122, 188 SpeedTest = 123, 189 TakeABreakPt = 124, 190 RequestPerfData = 125, 191 SetInterruptDefTimer= 126, 192 SetInterruptDefCount= 127, 193 GetInterruptDefStatus= 128, 194 LastCommCommand = 129, 195 196 /* filesystem commands */ 197 NuFileSystem = 300, 198 UFS = 301, 199 HostFileSystem = 302, 200 LastFileSystemCommand = 303, 201 202 /* Container Commands */ 203 ContainerCommand = 500, 204 ContainerCommand64 = 501, 205 RawIo = 502, 206 207 /* Cluster Commands */ 208 ClusterCommand = 550, 209 210 /* Scsi Port commands (scsi passthrough) */ 211 ScsiPortCommand = 600, 212 ScsiPortCommandU64 = 601, 213 SataPortCommandU64 = 602, 214 SasSmpPassThrough = 603, 215 SasRequestPhyInfo = 612, 216 217 /* misc house keeping and generic adapter initiated commands */ 218 AifRequest = 700, 219 CheckRevision = 701, 220 FsaHostShutdown = 702, 221 RequestAdapterInfo = 703, 222 IsAdapterPaused = 704, 223 SendHostTime = 705, 224 RequestSupplementAdapterInfo = 706, /* Supp. Info for set in UCC 225 * use only if supported 226 * (RequestAdapterInfo first) */ 227 LastMiscCommand = 707, 228 229 OnLineDiagnostic = 800, 230 FduAdapterTest = 801, 231 RequestCompatibilityId = 802, 232 AdapterEnvironmentInfo = 803, /* temp. sensors */ 233 NvsramEventLog = 900, 234 ResetNvsramEventLogPointers = 901, 235 EnableEventLog = 902, 236 DisableEventLog = 903, 237 EncryptedKeyTransportFIB= 904, 238 KeyableFeaturesFIB= 905 239 } AAC_FibCommands; 240 241 /* 242 * FIB types 243 */ 244 #define AAC_FIBTYPE_TFIB 1 245 #define AAC_FIBTYPE_TQE 2 246 #define AAC_FIBTYPE_TCTPERF 3 247 248 /* 249 * FIB transfer state 250 */ 251 #define AAC_FIBSTATE_HOSTOWNED (1<<0) /* owned by the host */ 252 #define AAC_FIBSTATE_ADAPTEROWNED (1<<1) /* owned by the adapter */ 253 #define AAC_FIBSTATE_INITIALISED (1<<2) /* initialised */ 254 #define AAC_FIBSTATE_EMPTY (1<<3) /* empty */ 255 #define AAC_FIBSTATE_FROMPOOL (1<<4) /* allocated from pool */ 256 #define AAC_FIBSTATE_FROMHOST (1<<5) /* sent from the host */ 257 #define AAC_FIBSTATE_FROMADAP (1<<6) /* sent from the adapter */ 258 #define AAC_FIBSTATE_REXPECTED (1<<7) /* response is expected */ 259 #define AAC_FIBSTATE_RNOTEXPECTED (1<<8) /* response is not expected */ 260 #define AAC_FIBSTATE_DONEADAP (1<<9) /* processed by the adapter */ 261 #define AAC_FIBSTATE_DONEHOST (1<<10) /* processed by the host */ 262 #define AAC_FIBSTATE_HIGH (1<<11) /* high priority */ 263 #define AAC_FIBSTATE_NORM (1<<12) /* normal priority */ 264 #define AAC_FIBSTATE_ASYNC (1<<13) 265 #define AAC_FIBSTATE_ASYNCIO (1<<13) /* to be removed */ 266 #define AAC_FIBSTATE_PAGEFILEIO (1<<14) /* to be removed */ 267 #define AAC_FIBSTATE_SHUTDOWN (1<<15) 268 #define AAC_FIBSTATE_LAZYWRITE (1<<16) /* to be removed */ 269 #define AAC_FIBSTATE_ADAPMICROFIB (1<<17) 270 #define AAC_FIBSTATE_BIOSFIB (1<<18) 271 #define AAC_FIBSTATE_FAST_RESPONSE (1<<19) /* fast response capable */ 272 #define AAC_FIBSTATE_APIFIB (1<<20) 273 274 /* 275 * FIB error values 276 */ 277 #define AAC_ERROR_NORMAL 0x00 278 #define AAC_ERROR_PENDING 0x01 279 #define AAC_ERROR_FATAL 0x02 280 #define AAC_ERROR_INVALID_QUEUE 0x03 281 #define AAC_ERROR_NOENTRIES 0x04 282 #define AAC_ERROR_SENDFAILED 0x05 283 #define AAC_ERROR_INVALID_QUEUE_PRIORITY 0x06 284 #define AAC_ERROR_FIB_ALLOCATION_FAILED 0x07 285 #define AAC_ERROR_FIB_DEALLOCATION_FAILED 0x08 286 287 /* 288 * Adapter Init Structure: this is passed to the adapter with the 289 * AAC_MONKER_INITSTRUCT command to point it at our control structures. 290 */ 291 struct aac_adapter_init { 292 u_int32_t InitStructRevision; 293 #define AAC_INIT_STRUCT_REVISION 3 294 #define AAC_INIT_STRUCT_REVISION_4 4 295 u_int32_t MiniPortRevision; 296 #define AAC_INIT_STRUCT_MINIPORT_REVISION 1 297 u_int32_t FilesystemRevision; 298 u_int32_t CommHeaderAddress; 299 u_int32_t FastIoCommAreaAddress; 300 u_int32_t AdapterFibsPhysicalAddress; 301 u_int32_t AdapterFibsVirtualAddress; 302 u_int32_t AdapterFibsSize; 303 u_int32_t AdapterFibAlign; 304 u_int32_t PrintfBufferAddress; 305 u_int32_t PrintfBufferSize; 306 #define AAC_PAGE_SIZE 4096 307 u_int32_t HostPhysMemPages; 308 u_int32_t HostElapsedSeconds; 309 /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */ 310 u_int32_t InitFlags; /* flags for supported features */ 311 #define AAC_INITFLAGS_NEW_COMM_SUPPORTED 1 312 #define AAC_INITFLAGS_DRIVER_USES_UTC_TIME 0x10 313 #define AAC_INITFLAGS_DRIVER_SUPPORTS_PM 0x20 314 u_int32_t MaxIoCommands; /* max outstanding commands */ 315 u_int32_t MaxIoSize; /* largest I/O command */ 316 u_int32_t MaxFibSize; /* largest FIB to adapter */ 317 } __packed; 318 319 /* 320 * Shared data types 321 */ 322 /* 323 * Container types 324 */ 325 typedef enum { 326 CT_NONE = 0, 327 CT_VOLUME, 328 CT_MIRROR, 329 CT_STRIPE, 330 CT_RAID5, 331 CT_SSRW, 332 CT_SSRO, 333 CT_MORPH, 334 CT_PASSTHRU, 335 CT_RAID4, 336 CT_RAID10, /* stripe of mirror */ 337 CT_RAID00, /* stripe of stripe */ 338 CT_VOLUME_OF_MIRRORS, /* volume of mirror */ 339 CT_PSEUDO_RAID3, /* really raid4 */ 340 CT_RAID50, /* stripe of raid5 */ 341 CT_RAID5D, /* raid5 distributed hot-sparing */ 342 CT_RAID5D0, 343 CT_RAID1E, /* extended raid1 mirroring */ 344 CT_RAID6, 345 CT_RAID60, 346 } AAC_FSAVolType; 347 348 /* 349 * Host-addressable object types 350 */ 351 typedef enum { 352 FT_REG = 1, /* regular file */ 353 FT_DIR, /* directory */ 354 FT_BLK, /* "block" device - reserved */ 355 FT_CHR, /* "character special" device - reserved */ 356 FT_LNK, /* symbolic link */ 357 FT_SOCK, /* socket */ 358 FT_FIFO, /* fifo */ 359 FT_FILESYS, /* ADAPTEC's "FSA"(tm) filesystem */ 360 FT_DRIVE, /* physical disk - addressable in scsi by b/t/l */ 361 FT_SLICE, /* virtual disk - raw volume - slice */ 362 FT_PARTITION, /* FSA partition - carved out of a slice - building 363 * block for containers */ 364 FT_VOLUME, /* Container - Volume Set */ 365 FT_STRIPE, /* Container - Stripe Set */ 366 FT_MIRROR, /* Container - Mirror Set */ 367 FT_RAID5, /* Container - Raid 5 Set */ 368 FT_DATABASE /* Storage object with "foreign" content manager */ 369 } AAC_FType; 370 371 /* 372 * Host-side scatter/gather list for 32-bit commands. 373 */ 374 struct aac_sg_entry { 375 u_int32_t SgAddress; 376 u_int32_t SgByteCount; 377 } __packed; 378 379 struct aac_sg_entry64 { 380 u_int64_t SgAddress; 381 u_int32_t SgByteCount; 382 } __packed; 383 384 struct aac_sg_entryraw { 385 u_int32_t Next; /* reserved for FW use */ 386 u_int32_t Prev; /* reserved for FW use */ 387 u_int64_t SgAddress; 388 u_int32_t SgByteCount; 389 u_int32_t Flags; /* reserved for FW use */ 390 } __packed; 391 392 struct aac_sg_table { 393 u_int32_t SgCount; 394 struct aac_sg_entry SgEntry[0]; 395 } __packed; 396 397 /* 398 * Host-side scatter/gather list for 64-bit commands. 399 */ 400 struct aac_sg_table64 { 401 u_int32_t SgCount; 402 struct aac_sg_entry64 SgEntry64[0]; 403 } __packed; 404 405 /* 406 * s/g list for raw commands 407 */ 408 struct aac_sg_tableraw { 409 u_int32_t SgCount; 410 struct aac_sg_entryraw SgEntryRaw[0]; 411 } __packed; 412 413 /* 414 * Container creation data 415 */ 416 struct aac_container_creation { 417 u_int8_t ViaBuildNumber; 418 u_int8_t MicroSecond; 419 u_int8_t Via; /* 1 = FSU, 2 = API, etc. */ 420 u_int8_t YearsSince1900; 421 u_int32_t Month:4; /* 1-12 */ 422 u_int32_t Day:6; /* 1-32 */ 423 u_int32_t Hour:6; /* 0-23 */ 424 u_int32_t Minute:6; /* 0-59 */ 425 u_int32_t Second:6; /* 0-59 */ 426 u_int64_t ViaAdapterSerialNumber; 427 } __packed; 428 429 /* 430 * Revision number handling 431 */ 432 433 typedef enum { 434 RevApplication = 1, 435 RevDkiCli, 436 RevNetService, 437 RevApi, 438 RevFileSysDriver, 439 RevMiniportDriver, 440 RevAdapterSW, 441 RevMonitor, 442 RevRemoteApi 443 } RevComponent; 444 445 struct FsaRevision { 446 union { 447 struct { 448 u_int8_t dash; 449 u_int8_t type; 450 u_int8_t minor; 451 u_int8_t major; 452 } comp; 453 u_int32_t ul; 454 } external; 455 u_int32_t buildNumber; 456 } __packed; 457 458 /* 459 * Adapter Information 460 */ 461 462 typedef enum { 463 CPU_NTSIM = 1, 464 CPU_I960, 465 CPU_ARM, 466 CPU_SPARC, 467 CPU_POWERPC, 468 CPU_ALPHA, 469 CPU_P7, 470 CPU_I960_RX, 471 CPU_MIPS, 472 CPU_XSCALE, 473 CPU__last 474 } AAC_CpuType; 475 476 typedef enum { 477 CPUI960_JX = 1, 478 CPUI960_CX, 479 CPUI960_HX, 480 CPUI960_RX, 481 CPUARM_SA110, 482 CPUARM_xxx, 483 CPUPPC_603e, 484 CPUPPC_xxx, 485 CPUI960_80303, 486 CPU_XSCALE_80321, 487 CPU_MIPS_4KC, 488 CPU_MIPS_5KC, 489 CPUSUBTYPE__last 490 } AAC_CpuSubType; 491 492 typedef enum { 493 PLAT_NTSIM = 1, 494 PLAT_V3ADU, 495 PLAT_CYCLONE, 496 PLAT_CYCLONE_HD, 497 PLAT_BATBOARD, 498 PLAT_BATBOARD_HD, 499 PLAT_YOLO, 500 PLAT_COBRA, 501 PLAT_ANAHEIM, 502 PLAT_JALAPENO, 503 PLAT_QUEENS, 504 PLAT_JALAPENO_DELL, 505 PLAT_POBLANO, 506 PLAT_POBLANO_OPAL, 507 PLAT_POBLANO_SL0, 508 PLAT_POBLANO_SL1, 509 PLAT_POBLANO_SL2, 510 PLAT_POBLANO_XXX, 511 PLAT_JALAPENO_P2, 512 PLAT_HABANERO, 513 PLAT_VULCAN, 514 PLAT_CRUSADER, 515 PLAT_LANCER, 516 PLAT_HARRIER, 517 PLAT_TERMINATOR, 518 PLAT_SKYHAWK, 519 PLAT_CORSAIR, 520 PLAT_JAGUAR, 521 PLAT_SATAHAWK, 522 PLAT_SATANATOR, 523 PLAT_PROWLER, 524 PLAT_BLACKBIRD, 525 PLAT_SABREEXPRESS, 526 PLAT_INTRUDER, 527 PLAT__last 528 } AAC_Platform; 529 530 typedef enum { 531 OEM_FLAVOR_ADAPTEC = 1, 532 OEM_FLAVOR_DELL, 533 OEM_FLAVOR_HP, 534 OEM_FLAVOR_IBM, 535 OEM_FLAVOR_CPQ, 536 OEM_FLAVOR_FSC, 537 OEM_FLAVOR_DWS, 538 OEM_FLAVOR_BRAND_Z, 539 OEM_FLAVOR_LEGEND, 540 OEM_FLAVOR_HITACHI, 541 OEM_FLAVOR_ESG, 542 OEM_FLAVOR_ICP, 543 OEM_FLAVOR_SCM, 544 OEM_FLAVOR__last 545 } AAC_OemFlavor; 546 547 /* 548 * XXX the aac-2622 with no battery present reports PLATFORM_BAT_OPT_PRESENT 549 */ 550 typedef enum 551 { 552 PLATFORM_BAT_REQ_PRESENT = 1, /* BATTERY REQUIRED AND PRESENT */ 553 PLATFORM_BAT_REQ_NOTPRESENT, /* BATTERY REQUIRED AND NOT PRESENT */ 554 PLATFORM_BAT_OPT_PRESENT, /* BATTERY OPTIONAL AND PRESENT */ 555 PLATFORM_BAT_OPT_NOTPRESENT, /* BATTERY OPTIONAL AND NOT PRESENT */ 556 PLATFORM_BAT_NOT_SUPPORTED /* BATTERY NOT SUPPORTED */ 557 } AAC_BatteryPlatform; 558 559 /* 560 * options supported by this board 561 * there has to be a one to one mapping of these defines and the ones in 562 * fsaapi.h, search for FSA_SUPPORT_SNAPSHOT 563 */ 564 #define AAC_SUPPORTED_SNAPSHOT 0x01 565 #define AAC_SUPPORTED_CLUSTERS 0x02 566 #define AAC_SUPPORTED_WRITE_CACHE 0x04 567 #define AAC_SUPPORTED_64BIT_DATA 0x08 568 #define AAC_SUPPORTED_HOST_TIME_FIB 0x10 569 #define AAC_SUPPORTED_RAID50 0x20 570 #define AAC_SUPPORTED_4GB_WINDOW 0x40 571 #define AAC_SUPPORTED_SCSI_UPGRADEABLE 0x80 572 #define AAC_SUPPORTED_SOFT_ERR_REPORT 0x100 573 #define AAC_SUPPORTED_NOT_RECONDITION 0x200 574 #define AAC_SUPPORTED_SGMAP_HOST64 0x400 575 #define AAC_SUPPORTED_ALARM 0x800 576 #define AAC_SUPPORTED_NONDASD 0x1000 577 #define AAC_SUPPORTED_SCSI_MANAGED 0x2000 578 #define AAC_SUPPORTED_RAID_SCSI_MODE 0x4000 579 #define AAC_SUPPORTED_SUPPLEMENT_ADAPTER_INFO 0x10000 580 #define AAC_SUPPORTED_NEW_COMM 0x20000 581 #define AAC_SUPPORTED_64BIT_ARRAYSIZE 0x40000 582 #define AAC_SUPPORTED_HEAT_SENSOR 0x80000 583 584 /* 585 * Structure used to respond to a RequestAdapterInfo fib. 586 */ 587 struct aac_adapter_info { 588 AAC_Platform PlatformBase; /* adapter type */ 589 AAC_CpuType CpuArchitecture; /* adapter CPU type */ 590 AAC_CpuSubType CpuVariant; /* adapter CPU subtype */ 591 u_int32_t ClockSpeed; /* adapter CPU clockspeed */ 592 u_int32_t ExecutionMem; /* adapter Execution Memory 593 * size */ 594 u_int32_t BufferMem; /* adapter Data Memory */ 595 u_int32_t TotalMem; /* adapter Total Memory */ 596 struct FsaRevision KernelRevision; /* adapter Kernel Software 597 * Revision */ 598 struct FsaRevision MonitorRevision; /* adapter Monitor/Diagnostic 599 * Software Revision */ 600 struct FsaRevision HardwareRevision;/* TBD */ 601 struct FsaRevision BIOSRevision; /* adapter BIOS Revision */ 602 u_int32_t ClusteringEnabled; 603 u_int32_t ClusterChannelMask; 604 u_int64_t SerialNumber; 605 AAC_BatteryPlatform batteryPlatform; 606 u_int32_t SupportedOptions; /* supported features of this 607 * controller */ 608 AAC_OemFlavor OemVariant; 609 } __packed; 610 611 /* 612 * Structure used to respond to a RequestSupplementAdapterInfo fib. 613 */ 614 struct vpd_info { 615 u_int8_t AssemblyPn[8]; 616 u_int8_t FruPn[8]; 617 u_int8_t BatteryFruPn[8]; 618 u_int8_t EcVersionString[8]; 619 u_int8_t Tsid[12]; 620 } __packed; 621 622 #define MFG_PCBA_SERIAL_NUMBER_WIDTH 12 623 #define MFG_WWN_WIDTH 8 624 625 struct aac_supplement_adapter_info { 626 /* The assigned Adapter Type Text, extra byte for null termination */ 627 int8_t AdapterTypeText[17+1]; 628 /* Pad for the text above */ 629 int8_t Pad[2]; 630 /* Size in bytes of the memory that is flashed */ 631 u_int32_t FlashMemoryByteSize; 632 /* The assigned IMAGEID_xxx for this adapter */ 633 u_int32_t FlashImageId; 634 /* 635 * The maximum number of Phys available on a SATA/SAS 636 * Controller, 0 otherwise 637 */ 638 u_int32_t MaxNumberPorts; 639 /* Version of expansion area */ 640 u_int32_t Version; 641 u_int32_t FeatureBits; 642 u_int8_t SlotNumber; 643 u_int8_t ReservedPad0[3]; 644 u_int8_t BuildDate[12]; 645 /* The current number of Ports on a SAS controller, 0 otherwise */ 646 u_int32_t CurrentNumberPorts; 647 648 struct vpd_info VpdInfo; 649 650 /* Firmware Revision (Vmaj.min-dash.) */ 651 struct FsaRevision FlashFirmwareRevision; 652 u_int32_t RaidTypeMorphOptions; 653 /* Firmware's boot code Revision (Vmaj.min-dash.) */ 654 struct FsaRevision FlashFirmwareBootRevision; 655 /* PCBA serial no. from th MFG sector */ 656 u_int8_t MfgPcbaSerialNo[MFG_PCBA_SERIAL_NUMBER_WIDTH]; 657 /* WWN from the MFG sector */ 658 u_int8_t MfgWWNName[MFG_WWN_WIDTH]; 659 /* Growth Area for future expansion ((7*4) - 12 - 8)/4 = 2 words */ 660 u_int32_t ReservedGrowth[2]; 661 } __packed; 662 663 /* 664 * Monitor/Kernel interface. 665 */ 666 667 /* 668 * Synchronous commands to the monitor/kernel. 669 */ 670 #define AAC_MONKER_BREAKPOINT 0x04 671 #define AAC_MONKER_INITSTRUCT 0x05 672 #define AAC_MONKER_SYNCFIB 0x0c 673 #define AAC_MONKER_GETKERNVER 0x11 674 #define AAC_MONKER_POSTRESULTS 0x14 675 #define AAC_MONKER_GETINFO 0x19 676 #define AAC_MONKER_GETDRVPROP 0x23 677 #define AAC_MONKER_RCVTEMP 0x25 678 #define AAC_MONKER_GETCOMMPREF 0x26 679 #define AAC_MONKER_REINIT 0xee 680 681 /* 682 * Adapter Status Register 683 * 684 * Phase Staus mailbox is 32bits: 685 * <31:16> = Phase Status 686 * <15:0> = Phase 687 * 688 * The adapter reports its present state through the phase. Only 689 * a single phase should be ever be set. Each phase can have multiple 690 * phase status bits to provide more detailed information about the 691 * state of the adapter. 692 */ 693 #define AAC_SELF_TEST_FAILED 0x00000004 694 #define AAC_MONITOR_PANIC 0x00000020 695 #define AAC_UP_AND_RUNNING 0x00000080 696 #define AAC_KERNEL_PANIC 0x00000100 697 698 /* 699 * Data types relating to control and monitoring of the NVRAM/WriteCache 700 * subsystem. 701 */ 702 703 #define AAC_NFILESYS 24 /* maximum number of filesystems */ 704 705 /* 706 * NVRAM/Write Cache subsystem states 707 */ 708 typedef enum { 709 NVSTATUS_DISABLED = 0, /* present, clean, not being used */ 710 NVSTATUS_ENABLED, /* present, possibly dirty, ready for use */ 711 NVSTATUS_ERROR, /* present, dirty, contains dirty data */ 712 NVSTATUS_BATTERY, /* present, bad or low battery, may contain 713 * dirty data */ 714 NVSTATUS_UNKNOWN /* for bad/missing device */ 715 } AAC_NVSTATUS; 716 717 /* 718 * NVRAM/Write Cache subsystem battery component states 719 * 720 */ 721 typedef enum { 722 NVBATTSTATUS_NONE = 0, /* battery has no power or is not present */ 723 NVBATTSTATUS_LOW, /* battery is low on power */ 724 NVBATTSTATUS_OK, /* battery is okay - normal operation possible 725 * only in this state */ 726 NVBATTSTATUS_RECONDITIONING /* no battery present - reconditioning 727 * in process */ 728 } AAC_NVBATTSTATUS; 729 730 /* 731 * Battery transition type 732 */ 733 typedef enum { 734 NVBATT_TRANSITION_NONE = 0, /* battery now has no power or is not 735 * present */ 736 NVBATT_TRANSITION_LOW, /* battery is now low on power */ 737 NVBATT_TRANSITION_OK /* battery is now okay - normal 738 * operation possible only in this 739 * state */ 740 } AAC_NVBATT_TRANSITION; 741 742 /* 743 * NVRAM Info structure returned for NVRAM_GetInfo call 744 */ 745 struct aac_nvramdevinfo { 746 u_int32_t NV_Enabled; /* write caching enabled */ 747 u_int32_t NV_Error; /* device in error state */ 748 u_int32_t NV_NDirty; /* count of dirty NVRAM buffers */ 749 u_int32_t NV_NActive; /* count of NVRAM buffers being 750 * written */ 751 } __packed; 752 753 struct aac_nvraminfo { 754 AAC_NVSTATUS NV_Status; /* nvram subsystem status */ 755 AAC_NVBATTSTATUS NV_BattStatus; /* battery status */ 756 u_int32_t NV_Size; /* size of WriteCache NVRAM in 757 * bytes */ 758 u_int32_t NV_BufSize; /* size of NVRAM buffers in 759 * bytes */ 760 u_int32_t NV_NBufs; /* number of NVRAM buffers */ 761 u_int32_t NV_NDirty; /* Num dirty NVRAM buffers */ 762 u_int32_t NV_NClean; /* Num clean NVRAM buffers */ 763 u_int32_t NV_NActive; /* Num NVRAM buffers being 764 * written */ 765 u_int32_t NV_NBrokered; /* Num brokered NVRAM buffers */ 766 struct aac_nvramdevinfo NV_DevInfo[AAC_NFILESYS]; /* per device 767 * info */ 768 u_int32_t NV_BattNeedsReconditioning; /* boolean */ 769 u_int32_t NV_TotalSize; /* size of all non-volatile 770 * memories in bytes */ 771 } __packed; 772 773 /* 774 * Data types relating to adapter-initiated FIBs 775 * 776 * Based on types and structures in <aifstruc.h> 777 */ 778 779 /* 780 * Progress Reports 781 */ 782 typedef enum { 783 AifJobStsSuccess = 1, 784 AifJobStsFinished, 785 AifJobStsAborted, 786 AifJobStsFailed, 787 AifJobStsLastReportMarker = 100, /* All prior mean last report */ 788 AifJobStsSuspended, 789 AifJobStsRunning 790 } AAC_AifJobStatus; 791 792 typedef enum { 793 AifJobScsiMin = 1, /* Minimum value for Scsi operation */ 794 AifJobScsiZero, /* SCSI device clear operation */ 795 AifJobScsiVerify, /* SCSI device Verify operation NO 796 * REPAIR */ 797 AifJobScsiExercise, /* SCSI device Exercise operation */ 798 AifJobScsiVerifyRepair, /* SCSI device Verify operation WITH 799 * repair */ 800 AifJobScsiWritePattern, /* write pattern */ 801 AifJobScsiMax = 99, /* Max Scsi value */ 802 AifJobCtrMin, /* Min Ctr op value */ 803 AifJobCtrZero, /* Container clear operation */ 804 AifJobCtrCopy, /* Container copy operation */ 805 AifJobCtrCreateMirror, /* Container Create Mirror operation */ 806 AifJobCtrMergeMirror, /* Container Merge Mirror operation */ 807 AifJobCtrScrubMirror, /* Container Scrub Mirror operation */ 808 AifJobCtrRebuildRaid5, /* Container Rebuild Raid5 operation */ 809 AifJobCtrScrubRaid5, /* Container Scrub Raid5 operation */ 810 AifJobCtrMorph, /* Container morph operation */ 811 AifJobCtrPartCopy, /* Container Partition copy operation */ 812 AifJobCtrRebuildMirror, /* Container Rebuild Mirror operation */ 813 AifJobCtrCrazyCache, /* crazy cache */ 814 AifJobCtrCopyback, /* Container Copyback operation */ 815 AifJobCtrCompactRaid5D, /* Container Compaction operation */ 816 AifJobCtrExpandRaid5D, /* Container Expansion operation */ 817 AifJobCtrRebuildRaid6, /* Container Rebuild Raid6 operation */ 818 AifJobCtrScrubRaid6, /* Container Scrub Raid6 operation */ 819 AifJobCtrSSBackup, /* Container snapshot backup task */ 820 AifJobCtrMax = 199, /* Max Ctr type operation */ 821 AifJobFsMin, /* Min Fs type operation */ 822 AifJobFsCreate, /* File System Create operation */ 823 AifJobFsVerify, /* File System Verify operation */ 824 AifJobFsExtend, /* File System Extend operation */ 825 AifJobFsMax = 299, /* Max Fs type operation */ 826 AifJobApiFormatNTFS, /* Format a drive to NTFS */ 827 AifJobApiFormatFAT, /* Format a drive to FAT */ 828 AifJobApiUpdateSnapshot, /* update the read/write half of a 829 * snapshot */ 830 AifJobApiFormatFAT32, /* Format a drive to FAT32 */ 831 AifJobApiMax = 399, /* Max API type operation */ 832 AifJobCtlContinuousCtrVerify, /* Adapter operation */ 833 AifJobCtlMax = 499 /* Max Adapter type operation */ 834 } AAC_AifJobType; 835 836 struct aac_AifContainers { 837 u_int32_t src; /* from/master */ 838 u_int32_t dst; /* to/slave */ 839 } __packed; 840 841 union aac_AifJobClient { 842 struct aac_AifContainers container; /* For Container and 843 * filesystem progress 844 * ops; */ 845 int32_t scsi_dh; /* For SCSI progress 846 * ops */ 847 }; 848 849 struct aac_AifJobDesc { 850 u_int32_t jobID; /* DO NOT FILL IN! Will be 851 * filled in by AIF */ 852 AAC_AifJobType type; /* Operation that is being 853 * performed */ 854 union aac_AifJobClient client; /* Details */ 855 } __packed; 856 857 struct aac_AifJobProgressReport { 858 struct aac_AifJobDesc jd; 859 AAC_AifJobStatus status; 860 u_int32_t finalTick; 861 u_int32_t currentTick; 862 u_int32_t jobSpecificData1; 863 u_int32_t jobSpecificData2; 864 } __packed; 865 866 /* 867 * Event Notification 868 */ 869 typedef enum { 870 /* General application notifies start here */ 871 AifEnGeneric = 1, /* Generic notification */ 872 AifEnTaskComplete, /* Task has completed */ 873 AifEnConfigChange, /* Adapter config change occurred */ 874 AifEnContainerChange, /* Adapter specific container 875 * configuration change */ 876 AifEnDeviceFailure, /* SCSI device failed */ 877 AifEnMirrorFailover, /* Mirror failover started */ 878 AifEnContainerEvent, /* Significant container event */ 879 AifEnFileSystemChange, /* File system changed */ 880 AifEnConfigPause, /* Container pause event */ 881 AifEnConfigResume, /* Container resume event */ 882 AifEnFailoverChange, /* Failover space assignment changed */ 883 AifEnRAID5RebuildDone, /* RAID5 rebuild finished */ 884 AifEnEnclosureManagement, /* Enclosure management event */ 885 AifEnBatteryEvent, /* Significant NV battery event */ 886 AifEnAddContainer, /* A new container was created. */ 887 AifEnDeleteContainer, /* A container was deleted. */ 888 AifEnSMARTEvent, /* SMART Event */ 889 AifEnBatteryNeedsRecond, /* The battery needs reconditioning */ 890 AifEnClusterEvent, /* Some cluster event */ 891 AifEnDiskSetEvent, /* A disk set event occurred. */ 892 AifEnContainerScsiEvent, /* a container event with no. and scsi id */ 893 AifEnPicBatteryEvent, /* An event gen. by pic_battery.c for an ABM */ 894 AifEnExpEvent, /* Exp. Event Type to replace CTPopUp messages */ 895 AifEnRAID6RebuildDone, /* RAID6 rebuild finished */ 896 AifEnSensorOverHeat, /* Heat Sensor indicate overheat */ 897 AifEnSensorCoolDown, /* Heat Sensor ind. cooled down after overheat */ 898 AifFeatureKeysModified, /* notif. of updated feature keys */ 899 AifApplicationExpirationEvent, /* notif. on app. expiration status */ 900 AifEnBackgroundConsistencyCheck,/* BCC notif. for NEC - DDTS 94700 */ 901 AifEnAddJBOD, /* A new JBOD type drive was created (30) */ 902 AifEnDeleteJBOD, /* A JBOD type drive was deleted (31) */ 903 AifDriverNotifyStart=199, /* Notifies for host driver go here */ 904 /* Host driver notifications start here */ 905 AifDenMorphComplete, /* A morph operation completed */ 906 AifDenVolumeExtendComplete /* Volume expand operation completed */ 907 } AAC_AifEventNotifyType; 908 909 struct aac_AifEnsGeneric { 910 char text[132]; /* Generic text */ 911 } __packed; 912 913 struct aac_AifEnsDeviceFailure { 914 u_int32_t deviceHandle; /* SCSI device handle */ 915 } __packed; 916 917 struct aac_AifEnsMirrorFailover { 918 u_int32_t container; /* Container with failed element */ 919 u_int32_t failedSlice; /* Old slice which failed */ 920 u_int32_t creatingSlice; /* New slice used for auto-create */ 921 } __packed; 922 923 struct aac_AifEnsContainerChange { 924 u_int32_t container[2]; /* container that changed, -1 if no 925 * container */ 926 } __packed; 927 928 struct aac_AifEnsContainerEvent { 929 u_int32_t container; /* container number */ 930 u_int32_t eventType; /* event type */ 931 } __packed; 932 933 struct aac_AifEnsEnclosureEvent { 934 u_int32_t empID; /* enclosure management proc number */ 935 u_int32_t unitID; /* unitId, fan id, power supply id, 936 * slot id, tempsensor id. */ 937 u_int32_t eventType; /* event type */ 938 } __packed; 939 940 typedef enum { 941 AIF_EM_DRIVE_INSERTION=31, 942 AIF_EM_DRIVE_REMOVAL 943 } aac_AifEMEventType; 944 945 struct aac_AifEnsBatteryEvent { 946 AAC_NVBATT_TRANSITION transition_type; /* eg from low to ok */ 947 AAC_NVBATTSTATUS current_state; /* current batt state */ 948 AAC_NVBATTSTATUS prior_state; /* prev batt state */ 949 } __packed; 950 951 struct aac_AifEnsDiskSetEvent { 952 u_int32_t eventType; 953 u_int64_t DsNum; 954 u_int64_t CreatorId; 955 } __packed; 956 957 typedef enum { 958 CLUSTER_NULL_EVENT = 0, 959 CLUSTER_PARTNER_NAME_EVENT, /* change in partner hostname or 960 * adaptername from NULL to non-NULL */ 961 /* (partner's agent may be up) */ 962 CLUSTER_PARTNER_NULL_NAME_EVENT /* change in partner hostname or 963 * adaptername from non-null to NULL */ 964 /* (partner has rebooted) */ 965 } AAC_ClusterAifEvent; 966 967 struct aac_AifEnsClusterEvent { 968 AAC_ClusterAifEvent eventType; 969 } __packed; 970 971 struct aac_AifEventNotify { 972 AAC_AifEventNotifyType type; 973 union { 974 struct aac_AifEnsGeneric EG; 975 struct aac_AifEnsDeviceFailure EDF; 976 struct aac_AifEnsMirrorFailover EMF; 977 struct aac_AifEnsContainerChange ECC; 978 struct aac_AifEnsContainerEvent ECE; 979 struct aac_AifEnsEnclosureEvent EEE; 980 struct aac_AifEnsBatteryEvent EBE; 981 struct aac_AifEnsDiskSetEvent EDS; 982 /* struct aac_AifEnsSMARTEvent ES;*/ 983 struct aac_AifEnsClusterEvent ECLE; 984 } data; 985 } __packed; 986 987 /* 988 * Adapter Initiated FIB command structures. Start with the adapter 989 * initiated FIBs that really come from the adapter, and get responded 990 * to by the host. 991 */ 992 #define AAC_AIF_REPORT_MAX_SIZE 64 993 994 typedef enum { 995 AifCmdEventNotify = 1, /* Notify of event */ 996 AifCmdJobProgress, /* Progress report */ 997 AifCmdAPIReport, /* Report from other user of API */ 998 AifCmdDriverNotify, /* Notify host driver of event */ 999 AifReqJobList = 100, /* Gets back complete job list */ 1000 AifReqJobsForCtr, /* Gets back jobs for specific container */ 1001 AifReqJobsForScsi, /* Gets back jobs for specific SCSI device */ 1002 AifReqJobReport, /* Gets back a specific job report or list */ 1003 AifReqTerminateJob, /* Terminates job */ 1004 AifReqSuspendJob, /* Suspends a job */ 1005 AifReqResumeJob, /* Resumes a job */ 1006 AifReqSendAPIReport, /* API generic report requests */ 1007 AifReqAPIJobStart, /* Start a job from the API */ 1008 AifReqAPIJobUpdate, /* Update a job report from the API */ 1009 AifReqAPIJobFinish /* Finish a job from the API */ 1010 } AAC_AifCommand; 1011 1012 struct aac_aif_command { 1013 AAC_AifCommand command; /* Tell host what type of 1014 * notify this is */ 1015 u_int32_t seqNumber; /* To allow ordering of 1016 * reports (if necessary) */ 1017 union { 1018 struct aac_AifEventNotify EN; /* Event notify */ 1019 struct aac_AifJobProgressReport PR[1]; /* Progress report */ 1020 u_int8_t AR[AAC_AIF_REPORT_MAX_SIZE]; 1021 u_int8_t data[AAC_FIB_DATASIZE - 8]; 1022 } data; 1023 } __packed; 1024 1025 /* 1026 * Filesystem commands/data 1027 * 1028 * The adapter has a very complex filesystem interface, most of which we ignore. 1029 * (And which seems not to be implemented, anyway.) 1030 */ 1031 1032 /* 1033 * FSA commands 1034 * (not used?) 1035 */ 1036 typedef enum { 1037 Null = 0, 1038 GetAttributes, 1039 SetAttributes, 1040 Lookup, 1041 ReadLink, 1042 Read, 1043 Write, 1044 Create, 1045 MakeDirectory, 1046 SymbolicLink, 1047 MakeNode, 1048 Removex, 1049 RemoveDirectory, 1050 Rename, 1051 Link, 1052 ReadDirectory, 1053 ReadDirectoryPlus, 1054 FileSystemStatus, 1055 FileSystemInfo, 1056 PathConfigure, 1057 Commit, 1058 Mount, 1059 UnMount, 1060 Newfs, 1061 FsCheck, 1062 FsSync, 1063 SimReadWrite, 1064 SetFileSystemStatus, 1065 BlockRead, 1066 BlockWrite, 1067 NvramIoctl, 1068 FsSyncWait, 1069 ClearArchiveBit, 1070 SetAcl, 1071 GetAcl, 1072 AssignAcl, 1073 FaultInsertion, 1074 CrazyCache 1075 } AAC_FSACommand; 1076 1077 /* 1078 * Command status values 1079 */ 1080 typedef enum { 1081 ST_OK = 0, 1082 ST_PERM = 1, 1083 ST_NOENT = 2, 1084 ST_IO = 5, 1085 ST_NXIO = 6, 1086 ST_E2BIG = 7, 1087 ST_ACCES = 13, 1088 ST_EXIST = 17, 1089 ST_XDEV = 18, 1090 ST_NODEV = 19, 1091 ST_NOTDIR = 20, 1092 ST_ISDIR = 21, 1093 ST_INVAL = 22, 1094 ST_FBIG = 27, 1095 ST_NOSPC = 28, 1096 ST_ROFS = 30, 1097 ST_MLINK = 31, 1098 ST_WOULDBLOCK = 35, 1099 ST_NAMETOOLONG = 63, 1100 ST_NOTEMPTY = 66, 1101 ST_DQUOT = 69, 1102 ST_STALE = 70, 1103 ST_REMOTE = 71, 1104 ST_NOT_READY = 72, 1105 ST_BADHANDLE = 10001, 1106 ST_NOT_SYNC = 10002, 1107 ST_BAD_COOKIE = 10003, 1108 ST_NOTSUPP = 10004, 1109 ST_TOOSMALL = 10005, 1110 ST_SERVERFAULT = 10006, 1111 ST_BADTYPE = 10007, 1112 ST_JUKEBOX = 10008, 1113 ST_NOTMOUNTED = 10009, 1114 ST_MAINTMODE = 10010, 1115 ST_STALEACL = 10011, 1116 ST_BUS_RESET = 20001 1117 } AAC_FSAStatus; 1118 1119 /* 1120 * Volume manager commands 1121 */ 1122 typedef enum _VM_COMMANDS { 1123 VM_Null = 0, 1124 VM_NameServe, 1125 VM_ContainerConfig, 1126 VM_Ioctl, 1127 VM_FilesystemIoctl, 1128 VM_CloseAll, 1129 VM_CtBlockRead, 1130 VM_CtBlockWrite, 1131 VM_SliceBlockRead, /* raw access to configured storage objects */ 1132 VM_SliceBlockWrite, 1133 VM_DriveBlockRead, /* raw access to physical devices */ 1134 VM_DriveBlockWrite, 1135 VM_EnclosureMgt, /* enclosure management */ 1136 VM_Unused, /* used to be diskset management */ 1137 VM_CtBlockVerify, 1138 VM_CtPerf, /* performance test */ 1139 VM_CtBlockRead64, 1140 VM_CtBlockWrite64, 1141 VM_CtBlockVerify64, 1142 VM_CtHostRead64, 1143 VM_CtHostWrite64, 1144 VM_DrvErrTblLog, /* drive error table/log type of command */ 1145 VM_NameServe64 1146 } AAC_VMCommand; 1147 1148 /* 1149 * "mountable object" 1150 */ 1151 struct aac_mntobj { 1152 u_int32_t ObjectId; 1153 char FileSystemName[16]; 1154 struct aac_container_creation CreateInfo; 1155 u_int32_t Capacity; 1156 u_int32_t VolType; 1157 u_int32_t ObjType; 1158 u_int32_t ContentState; 1159 #define FSCS_READONLY 0x0002 /* XXX need more information 1160 * than this */ 1161 union { 1162 u_int32_t pad[8]; 1163 } ObjExtension; 1164 u_int32_t AlterEgoId; 1165 u_int32_t CapacityHigh; 1166 } __packed; 1167 1168 struct aac_mntinfo { 1169 u_int32_t Command; 1170 u_int32_t MntType; 1171 u_int32_t MntCount; 1172 } __packed; 1173 1174 struct aac_mntinforesp { 1175 u_int32_t Status; 1176 u_int32_t MntType; 1177 u_int32_t MntRespCount; 1178 struct aac_mntobj MntTable[1]; 1179 } __packed; 1180 1181 /* 1182 * Container shutdown command. 1183 */ 1184 struct aac_closecommand { 1185 u_int32_t Command; 1186 u_int32_t ContainerId; 1187 } __packed; 1188 1189 /* 1190 * Container Config Command 1191 */ 1192 #define CT_GET_SCSI_METHOD 64 1193 struct aac_ctcfg { 1194 u_int32_t Command; 1195 u_int32_t cmd; 1196 u_int32_t param; 1197 } __packed; 1198 1199 struct aac_ctcfg_resp { 1200 u_int32_t Status; 1201 u_int32_t resp; 1202 u_int32_t param; 1203 } __packed; 1204 1205 /* 1206 * 'Ioctl' commads 1207 */ 1208 #define AAC_SCSI_MAX_PORTS 10 1209 #define AAC_BUS_NO_EXIST 0 1210 #define AAC_BUS_VALID 1 1211 #define AAC_BUS_FAULTED 2 1212 #define AAC_BUS_DISABLED 3 1213 #define GetBusInfo 0x9 1214 1215 struct aac_getbusinf { 1216 u_int32_t ProbeComplete; 1217 u_int32_t BusCount; 1218 u_int32_t TargetsPerBus; 1219 u_int8_t InitiatorBusId[AAC_SCSI_MAX_PORTS]; 1220 u_int8_t BusValid[AAC_SCSI_MAX_PORTS]; 1221 } __packed; 1222 1223 struct aac_vmioctl { 1224 u_int32_t Command; 1225 u_int32_t ObjType; 1226 u_int32_t MethId; 1227 u_int32_t ObjId; 1228 u_int32_t IoctlCmd; 1229 u_int32_t IoctlBuf[1]; /* Placeholder? */ 1230 } __packed; 1231 1232 struct aac_vmi_businf_resp { 1233 u_int32_t Status; 1234 u_int32_t ObjType; 1235 u_int32_t MethId; 1236 u_int32_t ObjId; 1237 u_int32_t IoctlCmd; 1238 struct aac_getbusinf BusInf; 1239 } __packed; 1240 1241 #if 0 1242 #define AAC_BTL_TO_HANDLE(b, t, l) \ 1243 (((b & 0x3f) << 7) | ((l & 0x7) << 4) | (t & 0xf)) 1244 #else 1245 #define AAC_BTL_TO_HANDLE(b, t, l) \ 1246 ((((u_int32_t)b & 0x0f) << 24) | \ 1247 (((u_int32_t)l & 0xff) << 16) | \ 1248 ((u_int32_t)t & 0xffff)) 1249 #endif 1250 #define GetDeviceProbeInfo 0x5 1251 1252 struct aac_vmi_devinfo_resp { 1253 u_int32_t Status; 1254 u_int32_t ObjType; 1255 u_int32_t MethId; 1256 u_int32_t ObjId; 1257 u_int32_t IoctlCmd; 1258 u_int8_t VendorId[8]; 1259 u_int8_t ProductId[16]; 1260 u_int8_t ProductRev[4]; 1261 u_int32_t Inquiry7; 1262 u_int32_t align1; 1263 u_int32_t Inquiry0; 1264 u_int32_t align2; 1265 u_int32_t Inquiry1; 1266 u_int32_t align3; 1267 u_int32_t reserved[2]; 1268 u_int8_t VendorSpecific[20]; 1269 u_int32_t Smart:1; 1270 u_int32_t AAC_Managed:1; 1271 u_int32_t align4; 1272 u_int32_t reserved2:6; 1273 u_int32_t Bus; 1274 u_int32_t Target; 1275 u_int32_t Lun; 1276 u_int32_t ultraEnable:1, 1277 disconnectEnable:1, 1278 fast20EnabledW:1, 1279 scamDevice:1, 1280 scamTolerant:1, 1281 setForSync:1, 1282 setForWide:1, 1283 syncDevice:1, 1284 wideDevice:1, 1285 reserved1:7, 1286 ScsiRate:8, 1287 ScsiOffset:8; 1288 }; /* Do not pack */ 1289 1290 #define ResetBus 0x16 1291 struct aac_resetbus { 1292 u_int32_t BusNumber; 1293 }; 1294 1295 /* 1296 * Write 'stability' options. 1297 */ 1298 typedef enum { 1299 CSTABLE = 1, 1300 CUNSTABLE 1301 } AAC_CacheLevel; 1302 1303 /* 1304 * Commit level response for a write request. 1305 */ 1306 typedef enum { 1307 CMFILE_SYNC_NVRAM = 1, 1308 CMDATA_SYNC_NVRAM, 1309 CMFILE_SYNC, 1310 CMDATA_SYNC, 1311 CMUNSTABLE 1312 } AAC_CommitLevel; 1313 1314 /* 1315 * Block read/write operations. 1316 * These structures are packed into the 'data' area in the FIB. 1317 */ 1318 1319 struct aac_blockread { 1320 u_int32_t Command; /* not FSACommand! */ 1321 u_int32_t ContainerId; 1322 u_int32_t BlockNumber; 1323 u_int32_t ByteCount; 1324 struct aac_sg_table SgMap; /* variable size */ 1325 } __packed; 1326 1327 struct aac_blockread64 { 1328 u_int32_t Command; 1329 u_int16_t ContainerId; 1330 u_int16_t SectorCount; 1331 u_int32_t BlockNumber; 1332 u_int16_t Pad; 1333 u_int16_t Flags; 1334 struct aac_sg_table64 SgMap64; 1335 } __packed; 1336 1337 struct aac_blockread_response { 1338 u_int32_t Status; 1339 u_int32_t ByteCount; 1340 } __packed; 1341 1342 struct aac_blockwrite { 1343 u_int32_t Command; /* not FSACommand! */ 1344 u_int32_t ContainerId; 1345 u_int32_t BlockNumber; 1346 u_int32_t ByteCount; 1347 u_int32_t Stable; 1348 struct aac_sg_table SgMap; /* variable size */ 1349 } __packed; 1350 1351 struct aac_blockwrite64 { 1352 u_int32_t Command; /* not FSACommand! */ 1353 u_int16_t ContainerId; 1354 u_int16_t SectorCount; 1355 u_int32_t BlockNumber; 1356 u_int16_t Pad; 1357 u_int16_t Flags; 1358 struct aac_sg_table64 SgMap64; /* variable size */ 1359 } __packed; 1360 1361 struct aac_blockwrite_response { 1362 u_int32_t Status; 1363 u_int32_t ByteCount; 1364 u_int32_t Committed; 1365 } __packed; 1366 1367 struct aac_raw_io { 1368 u_int64_t BlockNumber; 1369 u_int32_t ByteCount; 1370 u_int16_t ContainerId; 1371 u_int16_t Flags; /* 0: W, 1: R */ 1372 u_int16_t BpTotal; /* reserved for FW use */ 1373 u_int16_t BpComplete; /* reserved for FW use */ 1374 struct aac_sg_tableraw SgMapRaw; /* variable size */ 1375 } __packed; 1376 1377 /* 1378 * Container shutdown command. 1379 */ 1380 struct aac_close_command { 1381 u_int32_t Command; 1382 u_int32_t ContainerId; 1383 }; 1384 1385 /* 1386 * SCSI Passthrough structures 1387 */ 1388 struct aac_srb { 1389 u_int32_t function; 1390 u_int32_t bus; 1391 u_int32_t target; 1392 u_int32_t lun; 1393 u_int32_t timeout; 1394 u_int32_t flags; 1395 u_int32_t data_len; 1396 u_int32_t retry_limit; 1397 u_int32_t cdb_len; 1398 u_int8_t cdb[16]; 1399 struct aac_sg_table sg_map; 1400 }; 1401 1402 enum { 1403 AAC_SRB_FUNC_EXECUTE_SCSI = 0x00, 1404 AAC_SRB_FUNC_CLAIM_DEVICE, 1405 AAC_SRB_FUNC_IO_CONTROL, 1406 AAC_SRB_FUNC_RECEIVE_EVENT, 1407 AAC_SRB_FUNC_RELEASE_QUEUE, 1408 AAC_SRB_FUNC_ATTACH_DEVICE, 1409 AAC_SRB_FUNC_RELEASE_DEVICE, 1410 AAC_SRB_FUNC_SHUTDOWN, 1411 AAC_SRB_FUNC_FLUSH, 1412 AAC_SRB_FUNC_ABORT_COMMAND = 0x10, 1413 AAC_SRB_FUNC_RELEASE_RECOVERY, 1414 AAC_SRB_FUNC_RESET_BUS, 1415 AAC_SRB_FUNC_RESET_DEVICE, 1416 AAC_SRB_FUNC_TERMINATE_IO, 1417 AAC_SRB_FUNC_FLUSH_QUEUE, 1418 AAC_SRB_FUNC_REMOVE_DEVICE, 1419 AAC_SRB_FUNC_DOMAIN_VALIDATION 1420 }; 1421 1422 #define AAC_SRB_FLAGS_NO_DATA_XFER 0x0000 1423 #define AAC_SRB_FLAGS_DISABLE_DISCONNECT 0x0004 1424 #define AAC_SRB_FLAGS_DISABLE_SYNC_TRANSFER 0x0008 1425 #define AAC_SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x0010 1426 #define AAC_SRB_FLAGS_DISABLE_AUTOSENSE 0x0020 1427 #define AAC_SRB_FLAGS_DATA_IN 0x0040 1428 #define AAC_SRB_FLAGS_DATA_OUT 0x0080 1429 #define AAC_SRB_FLAGS_UNSPECIFIED_DIRECTION \ 1430 (AAC_SRB_FLAGS_DATA_IN | AAC_SRB_FLAGS_DATA_OUT) 1431 1432 #define AAC_HOST_SENSE_DATA_MAX 30 1433 1434 struct aac_srb_response { 1435 u_int32_t fib_status; 1436 u_int32_t srb_status; 1437 u_int32_t scsi_status; 1438 u_int32_t data_len; 1439 u_int32_t sense_len; 1440 u_int8_t sense[AAC_HOST_SENSE_DATA_MAX]; 1441 }; 1442 1443 /* 1444 * Status codes for SCSI passthrough commands. Since they are based on ASPI, 1445 * they also exactly match CAM status codes in both enumeration and meaning. 1446 * They seem to also be used as status codes for synchronous FIBs. 1447 */ 1448 enum { 1449 AAC_SRB_STS_PENDING = 0x00, 1450 AAC_SRB_STS_SUCCESS, 1451 AAC_SRB_STS_ABORTED, 1452 AAC_SRB_STS_ABORT_FAILED, 1453 AAC_SRB_STS_ERROR, 1454 AAC_SRB_STS_BUSY, 1455 AAC_SRB_STS_INVALID_REQUEST, 1456 AAC_SRB_STS_INVALID_PATH_ID, 1457 AAC_SRB_STS_NO_DEVICE, 1458 AAC_SRB_STS_TIMEOUT, 1459 AAC_SRB_STS_SELECTION_TIMEOUT, 1460 AAC_SRB_STS_COMMAND_TIMEOUT, 1461 AAC_SRB_STS_MESSAGE_REJECTED = 0x0D, 1462 AAC_SRB_STS_BUS_RESET, 1463 AAC_SRB_STS_PARITY_ERROR, 1464 AAC_SRB_STS_REQUEST_SENSE_FAILED, 1465 AAC_SRB_STS_NO_HBA, 1466 AAC_SRB_STS_DATA_OVERRUN, 1467 AAC_SRB_STS_UNEXPECTED_BUS_FREE, 1468 AAC_SRB_STS_PHASE_SEQUENCE_FAILURE, 1469 AAC_SRB_STS_BAD_SRB_BLOCK_LENGTH, 1470 AAC_SRB_STS_REQUEST_FLUSHED, 1471 AAC_SRB_STS_INVALID_LUN = 0x20, 1472 AAC_SRB_STS_INVALID_TARGET_ID, 1473 AAC_SRB_STS_BAD_FUNCTION, 1474 AAC_SRB_STS_ERROR_RECOVERY 1475 }; 1476 1477 /* 1478 * Register definitions for the Adaptec AAC-364 'Jalapeno I/II' adapters, based 1479 * on the SA110 'StrongArm'. 1480 */ 1481 1482 #define AAC_SA_DOORBELL0_CLEAR 0x98 /* doorbell 0 (adapter->host) */ 1483 #define AAC_SA_DOORBELL0_SET 0x9c 1484 #define AAC_SA_DOORBELL0 0x9c 1485 #define AAC_SA_MASK0_CLEAR 0xa0 1486 #define AAC_SA_MASK0_SET 0xa4 1487 1488 #define AAC_SA_DOORBELL1_CLEAR 0x9a /* doorbell 1 (host->adapter) */ 1489 #define AAC_SA_DOORBELL1_SET 0x9e 1490 #define AAC_SA_DOORBELL1 0x9e 1491 #define AAC_SA_MASK1_CLEAR 0xa2 1492 #define AAC_SA_MASK1_SET 0xa6 1493 1494 #define AAC_SA_MAILBOX 0xa8 /* mailbox (20 bytes) */ 1495 #define AAC_SA_FWSTATUS 0xc4 1496 1497 /* 1498 * Register definitions for the Adaptec 'Pablano' adapters, based on the i960Rx, 1499 * and other related adapters. 1500 */ 1501 1502 #define AAC_RX_OMR0 0x18 /* outbound message register 0 */ 1503 #define AAC_RX_OMR1 0x1c /* outbound message register 1 */ 1504 #define AAC_RX_IDBR 0x20 /* inbound doorbell register */ 1505 #define AAC_RX_IISR 0x24 /* inbound interrupt status register */ 1506 #define AAC_RX_IIMR 0x28 /* inbound interrupt mask register */ 1507 #define AAC_RX_ODBR 0x2c /* outbound doorbell register */ 1508 #define AAC_RX_OISR 0x30 /* outbound interrupt status register */ 1509 #define AAC_RX_OIMR 0x34 /* outbound interrupt mask register */ 1510 #define AAC_RX_IQUE 0x40 /* inbound queue */ 1511 #define AAC_RX_OQUE 0x44 /* outbound queue */ 1512 1513 #define AAC_RX_MAILBOX 0x50 /* mailbox (20 bytes) */ 1514 #define AAC_RX_FWSTATUS 0x6c 1515 1516 /* 1517 * Register definitions for the Adaptec 'Rocket' RAID-On-Chip adapters. 1518 * Unsurprisingly, it's quite similar to the i960! 1519 */ 1520 1521 #define AAC_RKT_OMR0 0x18 /* outbound message register 0 */ 1522 #define AAC_RKT_OMR1 0x1c /* outbound message register 1 */ 1523 #define AAC_RKT_IDBR 0x20 /* inbound doorbell register */ 1524 #define AAC_RKT_IISR 0x24 /* inbound interrupt status register */ 1525 #define AAC_RKT_IIMR 0x28 /* inbound interrupt mask register */ 1526 #define AAC_RKT_ODBR 0x2c /* outbound doorbell register */ 1527 #define AAC_RKT_OISR 0x30 /* outbound interrupt status register */ 1528 #define AAC_RKT_OIMR 0x34 /* outbound interrupt mask register */ 1529 #define AAC_RKT_IQUE 0x40 /* inbound queue */ 1530 #define AAC_RKT_OQUE 0x44 /* outbound queue */ 1531 1532 #define AAC_RKT_MAILBOX 0x1000 /* mailbox */ 1533 #define AAC_RKT_FWSTATUS 0x101c /* Firmware Status (mailbox 7) */ 1534 1535 /* 1536 * Common bit definitions for the doorbell registers. 1537 */ 1538 1539 /* 1540 * Status bits in the doorbell registers. 1541 */ 1542 #define AAC_DB_SYNC_COMMAND (1<<0) /* send/completed synchronous FIB */ 1543 #define AAC_DB_COMMAND_READY (1<<1) /* posted one or more commands */ 1544 #define AAC_DB_RESPONSE_READY (1<<2) /* one or more commands complete */ 1545 #define AAC_DB_COMMAND_NOT_FULL (1<<3) /* command queue not full */ 1546 #define AAC_DB_RESPONSE_NOT_FULL (1<<4) /* response queue not full */ 1547 1548 /* 1549 * The adapter can request the host print a message by setting the 1550 * DB_PRINTF flag in DOORBELL0. The driver responds by collecting the 1551 * message from the printf buffer, clearing the DB_PRINTF flag in 1552 * DOORBELL0 and setting it in DOORBELL1. 1553 * (ODBR and IDBR respectively for the i960Rx adapters) 1554 */ 1555 #define AAC_DB_PRINTF (1<<5) /* adapter requests host printf */ 1556 #define AAC_PRINTF_DONE (1<<5) /* Host completed printf processing */ 1557 1558 /* 1559 * Mask containing the interrupt bits we care about. We don't anticipate (or 1560 * want) interrupts not in this mask. 1561 */ 1562 #define AAC_DB_INTERRUPTS (AAC_DB_COMMAND_READY | \ 1563 AAC_DB_RESPONSE_READY | \ 1564 AAC_DB_PRINTF) 1565 #define AAC_DB_INT_NEW_COMM 0x08 1566