1 /* 2 * Copyright (c) 2016-2020, Yann Collet, Facebook, Inc. 3 * All rights reserved. 4 * 5 * This source code is licensed under both the BSD-style license (found in the 6 * LICENSE file in the root directory of this source tree) and the GPLv2 (found 7 * in the COPYING file in the root directory of this source tree). 8 * You may select, at your option, one of the above-listed licenses. 9 */ 10 #if defined (__cplusplus) 11 extern "C" { 12 #endif 13 14 #ifndef ZSTD_H_235446 15 #define ZSTD_H_235446 16 17 /* ====== Dependency ======*/ 18 #include <limits.h> /* INT_MAX */ 19 #include <stddef.h> /* size_t */ 20 21 22 /* ===== ZSTDLIB_API : control library symbols visibility ===== */ 23 #ifndef ZSTDLIB_VISIBILITY 24 # if defined(__GNUC__) && (__GNUC__ >= 4) 25 # define ZSTDLIB_VISIBILITY __attribute__ ((visibility ("default"))) 26 # else 27 # define ZSTDLIB_VISIBILITY 28 # endif 29 #endif 30 #if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) 31 # define ZSTDLIB_API __declspec(dllexport) ZSTDLIB_VISIBILITY 32 #elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) 33 # define ZSTDLIB_API __declspec(dllimport) ZSTDLIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ 34 #else 35 # define ZSTDLIB_API ZSTDLIB_VISIBILITY 36 #endif 37 38 39 /******************************************************************************* 40 Introduction 41 42 zstd, short for Zstandard, is a fast lossless compression algorithm, targeting 43 real-time compression scenarios at zlib-level and better compression ratios. 44 The zstd compression library provides in-memory compression and decompression 45 functions. 46 47 The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), 48 which is currently 22. Levels >= 20, labeled `--ultra`, should be used with 49 caution, as they require more memory. The library also offers negative 50 compression levels, which extend the range of speed vs. ratio preferences. 51 The lower the level, the faster the speed (at the cost of compression). 52 53 Compression can be done in: 54 - a single step (described as Simple API) 55 - a single step, reusing a context (described as Explicit context) 56 - unbounded multiple steps (described as Streaming compression) 57 58 The compression ratio achievable on small data can be highly improved using 59 a dictionary. Dictionary compression can be performed in: 60 - a single step (described as Simple dictionary API) 61 - a single step, reusing a dictionary (described as Bulk-processing 62 dictionary API) 63 64 Advanced experimental functions can be accessed using 65 `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. 66 67 Advanced experimental APIs should never be used with a dynamically-linked 68 library. They are not "stable"; their definitions or signatures may change in 69 the future. Only static linking is allowed. 70 *******************************************************************************/ 71 72 /*------ Version ------*/ 73 #define ZSTD_VERSION_MAJOR 1 74 #define ZSTD_VERSION_MINOR 4 75 #define ZSTD_VERSION_RELEASE 8 76 #define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) 77 78 /*! ZSTD_versionNumber() : 79 * Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */ 80 ZSTDLIB_API unsigned ZSTD_versionNumber(void); 81 82 #define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE 83 #define ZSTD_QUOTE(str) #str 84 #define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) 85 #define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) 86 87 /*! ZSTD_versionString() : 88 * Return runtime library version, like "1.4.5". Requires v1.3.0+. */ 89 ZSTDLIB_API const char* ZSTD_versionString(void); 90 91 /* ************************************* 92 * Default constant 93 ***************************************/ 94 #ifndef ZSTD_CLEVEL_DEFAULT 95 # define ZSTD_CLEVEL_DEFAULT 3 96 #endif 97 98 /* ************************************* 99 * Constants 100 ***************************************/ 101 102 /* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ 103 #define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ 104 #define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ 105 #define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ 106 #define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 107 108 #define ZSTD_BLOCKSIZELOG_MAX 17 109 #define ZSTD_BLOCKSIZE_MAX (1<<ZSTD_BLOCKSIZELOG_MAX) 110 111 112 113 /*************************************** 114 * Simple API 115 ***************************************/ 116 /*! ZSTD_compress() : 117 * Compresses `src` content as a single zstd compressed frame into already allocated `dst`. 118 * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. 119 * @return : compressed size written into `dst` (<= `dstCapacity), 120 * or an error code if it fails (which can be tested using ZSTD_isError()). */ 121 ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, 122 const void* src, size_t srcSize, 123 int compressionLevel); 124 125 /*! ZSTD_decompress() : 126 * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. 127 * `dstCapacity` is an upper bound of originalSize to regenerate. 128 * If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data. 129 * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), 130 * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ 131 ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, 132 const void* src, size_t compressedSize); 133 134 /*! ZSTD_getFrameContentSize() : requires v1.3.0+ 135 * `src` should point to the start of a ZSTD encoded frame. 136 * `srcSize` must be at least as large as the frame header. 137 * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. 138 * @return : - decompressed size of `src` frame content, if known 139 * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined 140 * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) 141 * note 1 : a 0 return value means the frame is valid but "empty". 142 * note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode. 143 * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. 144 * In which case, it's necessary to use streaming mode to decompress data. 145 * Optionally, application can rely on some implicit limit, 146 * as ZSTD_decompress() only needs an upper bound of decompressed size. 147 * (For example, data could be necessarily cut into blocks <= 16 KB). 148 * note 3 : decompressed size is always present when compression is completed using single-pass functions, 149 * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). 150 * note 4 : decompressed size can be very large (64-bits value), 151 * potentially larger than what local system can handle as a single memory segment. 152 * In which case, it's necessary to use streaming mode to decompress data. 153 * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. 154 * Always ensure return value fits within application's authorized limits. 155 * Each application can set its own limits. 156 * note 6 : This function replaces ZSTD_getDecompressedSize() */ 157 #define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) 158 #define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) 159 ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); 160 161 /*! ZSTD_getDecompressedSize() : 162 * NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize(). 163 * Both functions work the same way, but ZSTD_getDecompressedSize() blends 164 * "empty", "unknown" and "error" results to the same return value (0), 165 * while ZSTD_getFrameContentSize() gives them separate return values. 166 * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ 167 ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); 168 169 /*! ZSTD_findFrameCompressedSize() : 170 * `src` should point to the start of a ZSTD frame or skippable frame. 171 * `srcSize` must be >= first frame size 172 * @return : the compressed size of the first frame starting at `src`, 173 * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, 174 * or an error code if input is invalid */ 175 ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); 176 177 178 /*====== Helper functions ======*/ 179 #define ZSTD_COMPRESSBOUND(srcSize) ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ 180 ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ 181 ZSTDLIB_API unsigned ZSTD_isError(size_t code); /*!< tells if a `size_t` function result is an error code */ 182 ZSTDLIB_API const char* ZSTD_getErrorName(size_t code); /*!< provides readable string from an error code */ 183 ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed */ 184 ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ 185 186 187 /*************************************** 188 * Explicit context 189 ***************************************/ 190 /*= Compression context 191 * When compressing many times, 192 * it is recommended to allocate a context just once, 193 * and re-use it for each successive compression operation. 194 * This will make workload friendlier for system's memory. 195 * Note : re-using context is just a speed / resource optimization. 196 * It doesn't change the compression ratio, which remains identical. 197 * Note 2 : In multi-threaded environments, 198 * use one different context per thread for parallel execution. 199 */ 200 typedef struct ZSTD_CCtx_s ZSTD_CCtx; 201 ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); 202 ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); 203 204 /*! ZSTD_compressCCtx() : 205 * Same as ZSTD_compress(), using an explicit ZSTD_CCtx. 206 * Important : in order to behave similarly to `ZSTD_compress()`, 207 * this function compresses at requested compression level, 208 * __ignoring any other parameter__ . 209 * If any advanced parameter was set using the advanced API, 210 * they will all be reset. Only `compressionLevel` remains. 211 */ 212 ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, 213 void* dst, size_t dstCapacity, 214 const void* src, size_t srcSize, 215 int compressionLevel); 216 217 /*= Decompression context 218 * When decompressing many times, 219 * it is recommended to allocate a context only once, 220 * and re-use it for each successive compression operation. 221 * This will make workload friendlier for system's memory. 222 * Use one context per thread for parallel execution. */ 223 typedef struct ZSTD_DCtx_s ZSTD_DCtx; 224 ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); 225 ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); 226 227 /*! ZSTD_decompressDCtx() : 228 * Same as ZSTD_decompress(), 229 * requires an allocated ZSTD_DCtx. 230 * Compatible with sticky parameters. 231 */ 232 ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, 233 void* dst, size_t dstCapacity, 234 const void* src, size_t srcSize); 235 236 237 /*************************************** 238 * Advanced compression API 239 ***************************************/ 240 241 /* API design : 242 * Parameters are pushed one by one into an existing context, 243 * using ZSTD_CCtx_set*() functions. 244 * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. 245 * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! 246 * __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ . 247 * 248 * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). 249 * 250 * This API supercedes all other "advanced" API entry points in the experimental section. 251 * In the future, we expect to remove from experimental API entry points which are redundant with this API. 252 */ 253 254 255 /* Compression strategies, listed from fastest to strongest */ 256 typedef enum { ZSTD_fast=1, 257 ZSTD_dfast=2, 258 ZSTD_greedy=3, 259 ZSTD_lazy=4, 260 ZSTD_lazy2=5, 261 ZSTD_btlazy2=6, 262 ZSTD_btopt=7, 263 ZSTD_btultra=8, 264 ZSTD_btultra2=9 265 /* note : new strategies _might_ be added in the future. 266 Only the order (from fast to strong) is guaranteed */ 267 } ZSTD_strategy; 268 269 270 typedef enum { 271 272 /* compression parameters 273 * Note: When compressing with a ZSTD_CDict these parameters are superseded 274 * by the parameters used to construct the ZSTD_CDict. 275 * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */ 276 ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table. 277 * Note that exact compression parameters are dynamically determined, 278 * depending on both compression level and srcSize (when known). 279 * Default level is ZSTD_CLEVEL_DEFAULT==3. 280 * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. 281 * Note 1 : it's possible to pass a negative compression level. 282 * Note 2 : setting a level does not automatically set all other compression parameters 283 * to default. Setting this will however eventually dynamically impact the compression 284 * parameters which have not been manually set. The manually set 285 * ones will 'stick'. */ 286 /* Advanced compression parameters : 287 * It's possible to pin down compression parameters to some specific values. 288 * In which case, these values are no longer dynamically selected by the compressor */ 289 ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. 290 * This will set a memory budget for streaming decompression, 291 * with larger values requiring more memory 292 * and typically compressing more. 293 * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. 294 * Special: value 0 means "use default windowLog". 295 * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT 296 * requires explicitly allowing such size at streaming decompression stage. */ 297 ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. 298 * Resulting memory usage is (1 << (hashLog+2)). 299 * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. 300 * Larger tables improve compression ratio of strategies <= dFast, 301 * and improve speed of strategies > dFast. 302 * Special: value 0 means "use default hashLog". */ 303 ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. 304 * Resulting memory usage is (1 << (chainLog+2)). 305 * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. 306 * Larger tables result in better and slower compression. 307 * This parameter is useless for "fast" strategy. 308 * It's still useful when using "dfast" strategy, 309 * in which case it defines a secondary probe table. 310 * Special: value 0 means "use default chainLog". */ 311 ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. 312 * More attempts result in better and slower compression. 313 * This parameter is useless for "fast" and "dFast" strategies. 314 * Special: value 0 means "use default searchLog". */ 315 ZSTD_c_minMatch=105, /* Minimum size of searched matches. 316 * Note that Zstandard can still find matches of smaller size, 317 * it just tweaks its search algorithm to look for this size and larger. 318 * Larger values increase compression and decompression speed, but decrease ratio. 319 * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. 320 * Note that currently, for all strategies < btopt, effective minimum is 4. 321 * , for all strategies > fast, effective maximum is 6. 322 * Special: value 0 means "use default minMatchLength". */ 323 ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. 324 * For strategies btopt, btultra & btultra2: 325 * Length of Match considered "good enough" to stop search. 326 * Larger values make compression stronger, and slower. 327 * For strategy fast: 328 * Distance between match sampling. 329 * Larger values make compression faster, and weaker. 330 * Special: value 0 means "use default targetLength". */ 331 ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. 332 * The higher the value of selected strategy, the more complex it is, 333 * resulting in stronger and slower compression. 334 * Special: value 0 means "use default strategy". */ 335 336 /* LDM mode parameters */ 337 ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. 338 * This parameter is designed to improve compression ratio 339 * for large inputs, by finding large matches at long distance. 340 * It increases memory usage and window size. 341 * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB 342 * except when expressly set to a different value. 343 * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and 344 * compression strategy >= ZSTD_btopt (== compression level 16+) */ 345 ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. 346 * Larger values increase memory usage and compression ratio, 347 * but decrease compression speed. 348 * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX 349 * default: windowlog - 7. 350 * Special: value 0 means "automatically determine hashlog". */ 351 ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. 352 * Larger/too small values usually decrease compression ratio. 353 * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. 354 * Special: value 0 means "use default value" (default: 64). */ 355 ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. 356 * Larger values improve collision resolution but decrease compression speed. 357 * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. 358 * Special: value 0 means "use default value" (default: 3). */ 359 ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. 360 * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). 361 * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. 362 * Larger values improve compression speed. 363 * Deviating far from default value will likely result in a compression ratio decrease. 364 * Special: value 0 means "automatically determine hashRateLog". */ 365 366 /* frame parameters */ 367 ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) 368 * Content size must be known at the beginning of compression. 369 * This is automatically the case when using ZSTD_compress2(), 370 * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ 371 ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ 372 ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ 373 374 /* multi-threading parameters */ 375 /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). 376 * Otherwise, trying to set any other value than default (0) will be a no-op and return an error. 377 * In a situation where it's unknown if the linked library supports multi-threading or not, 378 * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property. 379 */ 380 ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. 381 * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() : 382 * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, 383 * while compression is performed in parallel, within worker thread(s). 384 * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : 385 * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). 386 * More workers improve speed, but also increase memory usage. 387 * Default value is `0`, aka "single-threaded mode" : no worker is spawned, 388 * compression is performed inside Caller's thread, and all invocations are blocking */ 389 ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. 390 * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. 391 * 0 means default, which is dynamically determined based on compression parameters. 392 * Job size must be a minimum of overlap size, or 1 MB, whichever is largest. 393 * The minimum size is automatically and transparently enforced. */ 394 ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. 395 * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. 396 * It helps preserve compression ratio, while each job is compressed in parallel. 397 * This value is enforced only when nbWorkers >= 1. 398 * Larger values increase compression ratio, but decrease speed. 399 * Possible values range from 0 to 9 : 400 * - 0 means "default" : value will be determined by the library, depending on strategy 401 * - 1 means "no overlap" 402 * - 9 means "full overlap", using a full window size. 403 * Each intermediate rank increases/decreases load size by a factor 2 : 404 * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default 405 * default value varies between 6 and 9, depending on strategy */ 406 407 /* note : additional experimental parameters are also available 408 * within the experimental section of the API. 409 * At the time of this writing, they include : 410 * ZSTD_c_rsyncable 411 * ZSTD_c_format 412 * ZSTD_c_forceMaxWindow 413 * ZSTD_c_forceAttachDict 414 * ZSTD_c_literalCompressionMode 415 * ZSTD_c_targetCBlockSize 416 * ZSTD_c_srcSizeHint 417 * ZSTD_c_enableDedicatedDictSearch 418 * ZSTD_c_stableInBuffer 419 * ZSTD_c_stableOutBuffer 420 * ZSTD_c_blockDelimiters 421 * ZSTD_c_validateSequences 422 * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. 423 * note : never ever use experimentalParam? names directly; 424 * also, the enums values themselves are unstable and can still change. 425 */ 426 ZSTD_c_experimentalParam1=500, 427 ZSTD_c_experimentalParam2=10, 428 ZSTD_c_experimentalParam3=1000, 429 ZSTD_c_experimentalParam4=1001, 430 ZSTD_c_experimentalParam5=1002, 431 ZSTD_c_experimentalParam6=1003, 432 ZSTD_c_experimentalParam7=1004, 433 ZSTD_c_experimentalParam8=1005, 434 ZSTD_c_experimentalParam9=1006, 435 ZSTD_c_experimentalParam10=1007, 436 ZSTD_c_experimentalParam11=1008, 437 ZSTD_c_experimentalParam12=1009 438 } ZSTD_cParameter; 439 440 typedef struct { 441 size_t error; 442 int lowerBound; 443 int upperBound; 444 } ZSTD_bounds; 445 446 /*! ZSTD_cParam_getBounds() : 447 * All parameters must belong to an interval with lower and upper bounds, 448 * otherwise they will either trigger an error or be automatically clamped. 449 * @return : a structure, ZSTD_bounds, which contains 450 * - an error status field, which must be tested using ZSTD_isError() 451 * - lower and upper bounds, both inclusive 452 */ 453 ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); 454 455 /*! ZSTD_CCtx_setParameter() : 456 * Set one compression parameter, selected by enum ZSTD_cParameter. 457 * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). 458 * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). 459 * Setting a parameter is generally only possible during frame initialization (before starting compression). 460 * Exception : when using multi-threading mode (nbWorkers >= 1), 461 * the following parameters can be updated _during_ compression (within same frame): 462 * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. 463 * new parameters will be active for next job only (after a flush()). 464 * @return : an error code (which can be tested using ZSTD_isError()). 465 */ 466 ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); 467 468 /*! ZSTD_CCtx_setPledgedSrcSize() : 469 * Total input data size to be compressed as a single frame. 470 * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. 471 * This value will also be controlled at end of frame, and trigger an error if not respected. 472 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 473 * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. 474 * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. 475 * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. 476 * Note 2 : pledgedSrcSize is only valid once, for the next frame. 477 * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. 478 * Note 3 : Whenever all input data is provided and consumed in a single round, 479 * for example with ZSTD_compress2(), 480 * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), 481 * this value is automatically overridden by srcSize instead. 482 */ 483 ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); 484 485 typedef enum { 486 ZSTD_reset_session_only = 1, 487 ZSTD_reset_parameters = 2, 488 ZSTD_reset_session_and_parameters = 3 489 } ZSTD_ResetDirective; 490 491 /*! ZSTD_CCtx_reset() : 492 * There are 2 different things that can be reset, independently or jointly : 493 * - The session : will stop compressing current frame, and make CCtx ready to start a new one. 494 * Useful after an error, or to interrupt any ongoing compression. 495 * Any internal data not yet flushed is cancelled. 496 * Compression parameters and dictionary remain unchanged. 497 * They will be used to compress next frame. 498 * Resetting session never fails. 499 * - The parameters : changes all parameters back to "default". 500 * This removes any reference to any dictionary too. 501 * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) 502 * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) 503 * - Both : similar to resetting the session, followed by resetting parameters. 504 */ 505 ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); 506 507 /*! ZSTD_compress2() : 508 * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. 509 * ZSTD_compress2() always starts a new frame. 510 * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. 511 * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() 512 * - The function is always blocking, returns when compression is completed. 513 * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. 514 * @return : compressed size written into `dst` (<= `dstCapacity), 515 * or an error code if it fails (which can be tested using ZSTD_isError()). 516 */ 517 ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, 518 void* dst, size_t dstCapacity, 519 const void* src, size_t srcSize); 520 521 522 /*************************************** 523 * Advanced decompression API 524 ***************************************/ 525 526 /* The advanced API pushes parameters one by one into an existing DCtx context. 527 * Parameters are sticky, and remain valid for all following frames 528 * using the same DCtx context. 529 * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). 530 * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). 531 * Therefore, no new decompression function is necessary. 532 */ 533 534 typedef enum { 535 536 ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which 537 * the streaming API will refuse to allocate memory buffer 538 * in order to protect the host from unreasonable memory requirements. 539 * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. 540 * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). 541 * Special: value 0 means "use default maximum windowLog". */ 542 543 /* note : additional experimental parameters are also available 544 * within the experimental section of the API. 545 * At the time of this writing, they include : 546 * ZSTD_d_format 547 * ZSTD_d_stableOutBuffer 548 * ZSTD_d_forceIgnoreChecksum 549 * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. 550 * note : never ever use experimentalParam? names directly 551 */ 552 ZSTD_d_experimentalParam1=1000, 553 ZSTD_d_experimentalParam2=1001, 554 ZSTD_d_experimentalParam3=1002 555 556 } ZSTD_dParameter; 557 558 /*! ZSTD_dParam_getBounds() : 559 * All parameters must belong to an interval with lower and upper bounds, 560 * otherwise they will either trigger an error or be automatically clamped. 561 * @return : a structure, ZSTD_bounds, which contains 562 * - an error status field, which must be tested using ZSTD_isError() 563 * - both lower and upper bounds, inclusive 564 */ 565 ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); 566 567 /*! ZSTD_DCtx_setParameter() : 568 * Set one compression parameter, selected by enum ZSTD_dParameter. 569 * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). 570 * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). 571 * Setting a parameter is only possible during frame initialization (before starting decompression). 572 * @return : 0, or an error code (which can be tested using ZSTD_isError()). 573 */ 574 ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); 575 576 /*! ZSTD_DCtx_reset() : 577 * Return a DCtx to clean state. 578 * Session and parameters can be reset jointly or separately. 579 * Parameters can only be reset when no active frame is being decompressed. 580 * @return : 0, or an error code, which can be tested with ZSTD_isError() 581 */ 582 ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); 583 584 585 /**************************** 586 * Streaming 587 ****************************/ 588 589 typedef struct ZSTD_inBuffer_s { 590 const void* src; /**< start of input buffer */ 591 size_t size; /**< size of input buffer */ 592 size_t pos; /**< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ 593 } ZSTD_inBuffer; 594 595 typedef struct ZSTD_outBuffer_s { 596 void* dst; /**< start of output buffer */ 597 size_t size; /**< size of output buffer */ 598 size_t pos; /**< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ 599 } ZSTD_outBuffer; 600 601 602 603 /*-*********************************************************************** 604 * Streaming compression - HowTo 605 * 606 * A ZSTD_CStream object is required to track streaming operation. 607 * Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. 608 * ZSTD_CStream objects can be reused multiple times on consecutive compression operations. 609 * It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. 610 * 611 * For parallel execution, use one separate ZSTD_CStream per thread. 612 * 613 * note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. 614 * 615 * Parameters are sticky : when starting a new compression on the same context, 616 * it will re-use the same sticky parameters as previous compression session. 617 * When in doubt, it's recommended to fully initialize the context before usage. 618 * Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), 619 * ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to 620 * set more specific parameters, the pledged source size, or load a dictionary. 621 * 622 * Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to 623 * consume input stream. The function will automatically update both `pos` 624 * fields within `input` and `output`. 625 * Note that the function may not consume the entire input, for example, because 626 * the output buffer is already full, in which case `input.pos < input.size`. 627 * The caller must check if input has been entirely consumed. 628 * If not, the caller must make some room to receive more compressed data, 629 * and then present again remaining input data. 630 * note: ZSTD_e_continue is guaranteed to make some forward progress when called, 631 * but doesn't guarantee maximal forward progress. This is especially relevant 632 * when compressing with multiple threads. The call won't block if it can 633 * consume some input, but if it can't it will wait for some, but not all, 634 * output to be flushed. 635 * @return : provides a minimum amount of data remaining to be flushed from internal buffers 636 * or an error code, which can be tested using ZSTD_isError(). 637 * 638 * At any moment, it's possible to flush whatever data might remain stuck within internal buffer, 639 * using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. 640 * Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). 641 * In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. 642 * You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the 643 * operation. 644 * note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will 645 * block until the flush is complete or the output buffer is full. 646 * @return : 0 if internal buffers are entirely flushed, 647 * >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), 648 * or an error code, which can be tested using ZSTD_isError(). 649 * 650 * Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. 651 * It will perform a flush and write frame epilogue. 652 * The epilogue is required for decoders to consider a frame completed. 653 * flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. 654 * You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to 655 * start a new frame. 656 * note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will 657 * block until the flush is complete or the output buffer is full. 658 * @return : 0 if frame fully completed and fully flushed, 659 * >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), 660 * or an error code, which can be tested using ZSTD_isError(). 661 * 662 * *******************************************************************/ 663 664 typedef ZSTD_CCtx ZSTD_CStream; /**< CCtx and CStream are now effectively same object (>= v1.3.0) */ 665 /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ 666 /*===== ZSTD_CStream management functions =====*/ 667 ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); 668 ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); 669 670 /*===== Streaming compression functions =====*/ 671 typedef enum { 672 ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ 673 ZSTD_e_flush=1, /* flush any data provided so far, 674 * it creates (at least) one new block, that can be decoded immediately on reception; 675 * frame will continue: any future data can still reference previously compressed data, improving compression. 676 * note : multithreaded compression will block to flush as much output as possible. */ 677 ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. 678 * note that frame is only closed after compressed data is fully flushed (return value == 0). 679 * After that point, any additional data starts a new frame. 680 * note : each frame is independent (does not reference any content from previous frame). 681 : note : multithreaded compression will block to flush as much output as possible. */ 682 } ZSTD_EndDirective; 683 684 /*! ZSTD_compressStream2() : 685 * Behaves about the same as ZSTD_compressStream, with additional control on end directive. 686 * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() 687 * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) 688 * - output->pos must be <= dstCapacity, input->pos must be <= srcSize 689 * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. 690 * - endOp must be a valid directive 691 * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. 692 * - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available, 693 * and then immediately returns, just indicating that there is some data remaining to be flushed. 694 * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. 695 * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. 696 * - @return provides a minimum amount of data remaining to be flushed from internal buffers 697 * or an error code, which can be tested using ZSTD_isError(). 698 * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. 699 * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. 700 * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. 701 * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), 702 * only ZSTD_e_end or ZSTD_e_flush operations are allowed. 703 * Before starting a new compression job, or changing compression parameters, 704 * it is required to fully flush internal buffers. 705 */ 706 ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, 707 ZSTD_outBuffer* output, 708 ZSTD_inBuffer* input, 709 ZSTD_EndDirective endOp); 710 711 712 /* These buffer sizes are softly recommended. 713 * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output. 714 * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(), 715 * reducing the amount of memory shuffling and buffering, resulting in minor performance savings. 716 * 717 * However, note that these recommendations are from the perspective of a C caller program. 718 * If the streaming interface is invoked from some other language, 719 * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo, 720 * a major performance rule is to reduce crossing such interface to an absolute minimum. 721 * It's not rare that performance ends being spent more into the interface, rather than compression itself. 722 * In which cases, prefer using large buffers, as large as practical, 723 * for both input and output, to reduce the nb of roundtrips. 724 */ 725 ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /**< recommended size for input buffer */ 726 ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */ 727 728 729 /* ***************************************************************************** 730 * This following is a legacy streaming API. 731 * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2(). 732 * It is redundant, but remains fully supported. 733 * Advanced parameters and dictionary compression can only be used through the 734 * new API. 735 ******************************************************************************/ 736 737 /*! 738 * Equivalent to: 739 * 740 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 741 * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) 742 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 743 */ 744 ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); 745 /*! 746 * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). 747 * NOTE: The return value is different. ZSTD_compressStream() returns a hint for 748 * the next read size (if non-zero and not an error). ZSTD_compressStream2() 749 * returns the minimum nb of bytes left to flush (if non-zero and not an error). 750 */ 751 ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); 752 /*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ 753 ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); 754 /*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ 755 ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); 756 757 758 /*-*************************************************************************** 759 * Streaming decompression - HowTo 760 * 761 * A ZSTD_DStream object is required to track streaming operations. 762 * Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. 763 * ZSTD_DStream objects can be re-used multiple times. 764 * 765 * Use ZSTD_initDStream() to start a new decompression operation. 766 * @return : recommended first input size 767 * Alternatively, use advanced API to set specific properties. 768 * 769 * Use ZSTD_decompressStream() repetitively to consume your input. 770 * The function will update both `pos` fields. 771 * If `input.pos < input.size`, some input has not been consumed. 772 * It's up to the caller to present again remaining data. 773 * The function tries to flush all data decoded immediately, respecting output buffer size. 774 * If `output.pos < output.size`, decoder has flushed everything it could. 775 * But if `output.pos == output.size`, there might be some data left within internal buffers., 776 * In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. 777 * Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. 778 * @return : 0 when a frame is completely decoded and fully flushed, 779 * or an error code, which can be tested using ZSTD_isError(), 780 * or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : 781 * the return value is a suggested next input size (just a hint for better latency) 782 * that will never request more than the remaining frame size. 783 * *******************************************************************************/ 784 785 typedef ZSTD_DCtx ZSTD_DStream; /**< DCtx and DStream are now effectively same object (>= v1.3.0) */ 786 /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ 787 /*===== ZSTD_DStream management functions =====*/ 788 ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); 789 ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); 790 791 /*===== Streaming decompression functions =====*/ 792 793 /* This function is redundant with the advanced API and equivalent to: 794 * 795 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 796 * ZSTD_DCtx_refDDict(zds, NULL); 797 */ 798 ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); 799 800 ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); 801 802 ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ 803 ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ 804 805 806 /************************** 807 * Simple dictionary API 808 ***************************/ 809 /*! ZSTD_compress_usingDict() : 810 * Compression at an explicit compression level using a Dictionary. 811 * A dictionary can be any arbitrary data segment (also called a prefix), 812 * or a buffer with specified information (see dictBuilder/zdict.h). 813 * Note : This function loads the dictionary, resulting in significant startup delay. 814 * It's intended for a dictionary used only once. 815 * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ 816 ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, 817 void* dst, size_t dstCapacity, 818 const void* src, size_t srcSize, 819 const void* dict,size_t dictSize, 820 int compressionLevel); 821 822 /*! ZSTD_decompress_usingDict() : 823 * Decompression using a known Dictionary. 824 * Dictionary must be identical to the one used during compression. 825 * Note : This function loads the dictionary, resulting in significant startup delay. 826 * It's intended for a dictionary used only once. 827 * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ 828 ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, 829 void* dst, size_t dstCapacity, 830 const void* src, size_t srcSize, 831 const void* dict,size_t dictSize); 832 833 834 /*********************************** 835 * Bulk processing dictionary API 836 **********************************/ 837 typedef struct ZSTD_CDict_s ZSTD_CDict; 838 839 /*! ZSTD_createCDict() : 840 * When compressing multiple messages or blocks using the same dictionary, 841 * it's recommended to digest the dictionary only once, since it's a costly operation. 842 * ZSTD_createCDict() will create a state from digesting a dictionary. 843 * The resulting state can be used for future compression operations with very limited startup cost. 844 * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. 845 * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict. 846 * Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content. 847 * Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer, 848 * in which case the only thing that it transports is the @compressionLevel. 849 * This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively, 850 * expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */ 851 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, 852 int compressionLevel); 853 854 /*! ZSTD_freeCDict() : 855 * Function frees memory allocated by ZSTD_createCDict(). */ 856 ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); 857 858 /*! ZSTD_compress_usingCDict() : 859 * Compression using a digested Dictionary. 860 * Recommended when same dictionary is used multiple times. 861 * Note : compression level is _decided at dictionary creation time_, 862 * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ 863 ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, 864 void* dst, size_t dstCapacity, 865 const void* src, size_t srcSize, 866 const ZSTD_CDict* cdict); 867 868 869 typedef struct ZSTD_DDict_s ZSTD_DDict; 870 871 /*! ZSTD_createDDict() : 872 * Create a digested dictionary, ready to start decompression operation without startup delay. 873 * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ 874 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); 875 876 /*! ZSTD_freeDDict() : 877 * Function frees memory allocated with ZSTD_createDDict() */ 878 ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); 879 880 /*! ZSTD_decompress_usingDDict() : 881 * Decompression using a digested Dictionary. 882 * Recommended when same dictionary is used multiple times. */ 883 ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, 884 void* dst, size_t dstCapacity, 885 const void* src, size_t srcSize, 886 const ZSTD_DDict* ddict); 887 888 889 /******************************** 890 * Dictionary helper functions 891 *******************************/ 892 893 /*! ZSTD_getDictID_fromDict() : 894 * Provides the dictID stored within dictionary. 895 * if @return == 0, the dictionary is not conformant with Zstandard specification. 896 * It can still be loaded, but as a content-only dictionary. */ 897 ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); 898 899 /*! ZSTD_getDictID_fromDDict() : 900 * Provides the dictID of the dictionary loaded into `ddict`. 901 * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. 902 * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ 903 ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); 904 905 /*! ZSTD_getDictID_fromFrame() : 906 * Provides the dictID required to decompressed the frame stored within `src`. 907 * If @return == 0, the dictID could not be decoded. 908 * This could for one of the following reasons : 909 * - The frame does not require a dictionary to be decoded (most common case). 910 * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information. 911 * Note : this use case also happens when using a non-conformant dictionary. 912 * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). 913 * - This is not a Zstandard frame. 914 * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ 915 ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); 916 917 918 /******************************************************************************* 919 * Advanced dictionary and prefix API 920 * 921 * This API allows dictionaries to be used with ZSTD_compress2(), 922 * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and 923 * only reset with the context is reset with ZSTD_reset_parameters or 924 * ZSTD_reset_session_and_parameters. Prefixes are single-use. 925 ******************************************************************************/ 926 927 928 /*! ZSTD_CCtx_loadDictionary() : 929 * Create an internal CDict from `dict` buffer. 930 * Decompression will have to use same dictionary. 931 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 932 * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, 933 * meaning "return to no-dictionary mode". 934 * Note 1 : Dictionary is sticky, it will be used for all future compressed frames. 935 * To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters). 936 * Note 2 : Loading a dictionary involves building tables. 937 * It's also a CPU consuming operation, with non-negligible impact on latency. 938 * Tables are dependent on compression parameters, and for this reason, 939 * compression parameters can no longer be changed after loading a dictionary. 940 * Note 3 :`dict` content will be copied internally. 941 * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. 942 * In such a case, dictionary buffer must outlive its users. 943 * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() 944 * to precisely select how dictionary content must be interpreted. */ 945 ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); 946 947 /*! ZSTD_CCtx_refCDict() : 948 * Reference a prepared dictionary, to be used for all next compressed frames. 949 * Note that compression parameters are enforced from within CDict, 950 * and supersede any compression parameter previously set within CCtx. 951 * The parameters ignored are labled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. 952 * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. 953 * The dictionary will remain valid for future compressed frames using same CCtx. 954 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 955 * Special : Referencing a NULL CDict means "return to no-dictionary mode". 956 * Note 1 : Currently, only one dictionary can be managed. 957 * Referencing a new dictionary effectively "discards" any previous one. 958 * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ 959 ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); 960 961 /*! ZSTD_CCtx_refPrefix() : 962 * Reference a prefix (single-usage dictionary) for next compressed frame. 963 * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). 964 * Decompression will need same prefix to properly regenerate data. 965 * Compressing with a prefix is similar in outcome as performing a diff and compressing it, 966 * but performs much faster, especially during decompression (compression speed is tunable with compression level). 967 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 968 * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary 969 * Note 1 : Prefix buffer is referenced. It **must** outlive compression. 970 * Its content must remain unmodified during compression. 971 * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, 972 * ensure that the window size is large enough to contain the entire source. 973 * See ZSTD_c_windowLog. 974 * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. 975 * It's a CPU consuming operation, with non-negligible impact on latency. 976 * If there is a need to use the same prefix multiple times, consider loadDictionary instead. 977 * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent). 978 * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ 979 ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, 980 const void* prefix, size_t prefixSize); 981 982 /*! ZSTD_DCtx_loadDictionary() : 983 * Create an internal DDict from dict buffer, 984 * to be used to decompress next frames. 985 * The dictionary remains valid for all future frames, until explicitly invalidated. 986 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 987 * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, 988 * meaning "return to no-dictionary mode". 989 * Note 1 : Loading a dictionary involves building tables, 990 * which has a non-negligible impact on CPU usage and latency. 991 * It's recommended to "load once, use many times", to amortize the cost 992 * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. 993 * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. 994 * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of 995 * how dictionary content is loaded and interpreted. 996 */ 997 ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 998 999 /*! ZSTD_DCtx_refDDict() : 1000 * Reference a prepared dictionary, to be used to decompress next frames. 1001 * The dictionary remains active for decompression of future frames using same DCtx. 1002 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1003 * Note 1 : Currently, only one dictionary can be managed. 1004 * Referencing a new dictionary effectively "discards" any previous one. 1005 * Special: referencing a NULL DDict means "return to no-dictionary mode". 1006 * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. 1007 */ 1008 ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); 1009 1010 /*! ZSTD_DCtx_refPrefix() : 1011 * Reference a prefix (single-usage dictionary) to decompress next frame. 1012 * This is the reverse operation of ZSTD_CCtx_refPrefix(), 1013 * and must use the same prefix as the one used during compression. 1014 * Prefix is **only used once**. Reference is discarded at end of frame. 1015 * End of frame is reached when ZSTD_decompressStream() returns 0. 1016 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1017 * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary 1018 * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. 1019 * Prefix buffer must remain unmodified up to the end of frame, 1020 * reached when ZSTD_decompressStream() returns 0. 1021 * Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent). 1022 * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) 1023 * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. 1024 * A full dictionary is more costly, as it requires building tables. 1025 */ 1026 ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, 1027 const void* prefix, size_t prefixSize); 1028 1029 /* === Memory management === */ 1030 1031 /*! ZSTD_sizeof_*() : 1032 * These functions give the _current_ memory usage of selected object. 1033 * Note that object memory usage can evolve (increase or decrease) over time. */ 1034 ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); 1035 ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); 1036 ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); 1037 ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); 1038 ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); 1039 ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); 1040 1041 #endif /* ZSTD_H_235446 */ 1042 1043 1044 /* ************************************************************************************** 1045 * ADVANCED AND EXPERIMENTAL FUNCTIONS 1046 **************************************************************************************** 1047 * The definitions in the following section are considered experimental. 1048 * They are provided for advanced scenarios. 1049 * They should never be used with a dynamic library, as prototypes may change in the future. 1050 * Use them only in association with static linking. 1051 * ***************************************************************************************/ 1052 1053 #if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) 1054 #define ZSTD_H_ZSTD_STATIC_LINKING_ONLY 1055 1056 /**************************************************************************************** 1057 * experimental API (static linking only) 1058 **************************************************************************************** 1059 * The following symbols and constants 1060 * are not planned to join "stable API" status in the near future. 1061 * They can still change in future versions. 1062 * Some of them are planned to remain in the static_only section indefinitely. 1063 * Some of them might be removed in the future (especially when redundant with existing stable functions) 1064 * ***************************************************************************************/ 1065 1066 #define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1) /* minimum input size required to query frame header size */ 1067 #define ZSTD_FRAMEHEADERSIZE_MIN(format) ((format) == ZSTD_f_zstd1 ? 6 : 2) 1068 #define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ 1069 #define ZSTD_SKIPPABLEHEADERSIZE 8 1070 1071 /* compression parameter bounds */ 1072 #define ZSTD_WINDOWLOG_MAX_32 30 1073 #define ZSTD_WINDOWLOG_MAX_64 31 1074 #define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) 1075 #define ZSTD_WINDOWLOG_MIN 10 1076 #define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) 1077 #define ZSTD_HASHLOG_MIN 6 1078 #define ZSTD_CHAINLOG_MAX_32 29 1079 #define ZSTD_CHAINLOG_MAX_64 30 1080 #define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) 1081 #define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN 1082 #define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) 1083 #define ZSTD_SEARCHLOG_MIN 1 1084 #define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ 1085 #define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ 1086 #define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX 1087 #define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ 1088 #define ZSTD_STRATEGY_MIN ZSTD_fast 1089 #define ZSTD_STRATEGY_MAX ZSTD_btultra2 1090 1091 1092 #define ZSTD_OVERLAPLOG_MIN 0 1093 #define ZSTD_OVERLAPLOG_MAX 9 1094 1095 #define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame 1096 * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size, 1097 * to preserve host's memory from unreasonable requirements. 1098 * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,). 1099 * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */ 1100 1101 1102 /* LDM parameter bounds */ 1103 #define ZSTD_LDM_HASHLOG_MIN ZSTD_HASHLOG_MIN 1104 #define ZSTD_LDM_HASHLOG_MAX ZSTD_HASHLOG_MAX 1105 #define ZSTD_LDM_MINMATCH_MIN 4 1106 #define ZSTD_LDM_MINMATCH_MAX 4096 1107 #define ZSTD_LDM_BUCKETSIZELOG_MIN 1 1108 #define ZSTD_LDM_BUCKETSIZELOG_MAX 8 1109 #define ZSTD_LDM_HASHRATELOG_MIN 0 1110 #define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN) 1111 1112 /* Advanced parameter bounds */ 1113 #define ZSTD_TARGETCBLOCKSIZE_MIN 64 1114 #define ZSTD_TARGETCBLOCKSIZE_MAX ZSTD_BLOCKSIZE_MAX 1115 #define ZSTD_SRCSIZEHINT_MIN 0 1116 #define ZSTD_SRCSIZEHINT_MAX INT_MAX 1117 1118 /* internal */ 1119 #define ZSTD_HASHLOG3_MAX 17 1120 1121 1122 /* --- Advanced types --- */ 1123 1124 typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params; 1125 1126 typedef struct { 1127 unsigned int offset; /* The offset of the match. (NOT the same as the offset code) 1128 * If offset == 0 and matchLength == 0, this sequence represents the last 1129 * literals in the block of litLength size. 1130 */ 1131 1132 unsigned int litLength; /* Literal length of the sequence. */ 1133 unsigned int matchLength; /* Match length of the sequence. */ 1134 1135 /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0. 1136 * In this case, we will treat the sequence as a marker for a block boundary. 1137 */ 1138 1139 unsigned int rep; /* Represents which repeat offset is represented by the field 'offset'. 1140 * Ranges from [0, 3]. 1141 * 1142 * Repeat offsets are essentially previous offsets from previous sequences sorted in 1143 * recency order. For more detail, see doc/zstd_compression_format.md 1144 * 1145 * If rep == 0, then 'offset' does not contain a repeat offset. 1146 * If rep > 0: 1147 * If litLength != 0: 1148 * rep == 1 --> offset == repeat_offset_1 1149 * rep == 2 --> offset == repeat_offset_2 1150 * rep == 3 --> offset == repeat_offset_3 1151 * If litLength == 0: 1152 * rep == 1 --> offset == repeat_offset_2 1153 * rep == 2 --> offset == repeat_offset_3 1154 * rep == 3 --> offset == repeat_offset_1 - 1 1155 * 1156 * Note: This field is optional. ZSTD_generateSequences() will calculate the value of 1157 * 'rep', but repeat offsets do not necessarily need to be calculated from an external 1158 * sequence provider's perspective. For example, ZSTD_compressSequences() does not 1159 * use this 'rep' field at all (as of now). 1160 */ 1161 } ZSTD_Sequence; 1162 1163 typedef struct { 1164 unsigned windowLog; /**< largest match distance : larger == more compression, more memory needed during decompression */ 1165 unsigned chainLog; /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */ 1166 unsigned hashLog; /**< dispatch table : larger == faster, more memory */ 1167 unsigned searchLog; /**< nb of searches : larger == more compression, slower */ 1168 unsigned minMatch; /**< match length searched : larger == faster decompression, sometimes less compression */ 1169 unsigned targetLength; /**< acceptable match size for optimal parser (only) : larger == more compression, slower */ 1170 ZSTD_strategy strategy; /**< see ZSTD_strategy definition above */ 1171 } ZSTD_compressionParameters; 1172 1173 typedef struct { 1174 int contentSizeFlag; /**< 1: content size will be in frame header (when known) */ 1175 int checksumFlag; /**< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */ 1176 int noDictIDFlag; /**< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */ 1177 } ZSTD_frameParameters; 1178 1179 typedef struct { 1180 ZSTD_compressionParameters cParams; 1181 ZSTD_frameParameters fParams; 1182 } ZSTD_parameters; 1183 1184 typedef enum { 1185 ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */ 1186 ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */ 1187 ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */ 1188 } ZSTD_dictContentType_e; 1189 1190 typedef enum { 1191 ZSTD_dlm_byCopy = 0, /**< Copy dictionary content internally */ 1192 ZSTD_dlm_byRef = 1 /**< Reference dictionary content -- the dictionary buffer must outlive its users. */ 1193 } ZSTD_dictLoadMethod_e; 1194 1195 typedef enum { 1196 ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */ 1197 ZSTD_f_zstd1_magicless = 1 /* Variant of zstd frame format, without initial 4-bytes magic number. 1198 * Useful to save 4 bytes per generated frame. 1199 * Decoder cannot recognise automatically this format, requiring this instruction. */ 1200 } ZSTD_format_e; 1201 1202 typedef enum { 1203 /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */ 1204 ZSTD_d_validateChecksum = 0, 1205 ZSTD_d_ignoreChecksum = 1 1206 } ZSTD_forceIgnoreChecksum_e; 1207 1208 typedef enum { 1209 /* Note: this enum and the behavior it controls are effectively internal 1210 * implementation details of the compressor. They are expected to continue 1211 * to evolve and should be considered only in the context of extremely 1212 * advanced performance tuning. 1213 * 1214 * Zstd currently supports the use of a CDict in three ways: 1215 * 1216 * - The contents of the CDict can be copied into the working context. This 1217 * means that the compression can search both the dictionary and input 1218 * while operating on a single set of internal tables. This makes 1219 * the compression faster per-byte of input. However, the initial copy of 1220 * the CDict's tables incurs a fixed cost at the beginning of the 1221 * compression. For small compressions (< 8 KB), that copy can dominate 1222 * the cost of the compression. 1223 * 1224 * - The CDict's tables can be used in-place. In this model, compression is 1225 * slower per input byte, because the compressor has to search two sets of 1226 * tables. However, this model incurs no start-up cost (as long as the 1227 * working context's tables can be reused). For small inputs, this can be 1228 * faster than copying the CDict's tables. 1229 * 1230 * - The CDict's tables are not used at all, and instead we use the working 1231 * context alone to reload the dictionary and use params based on the source 1232 * size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict(). 1233 * This method is effective when the dictionary sizes are very small relative 1234 * to the input size, and the input size is fairly large to begin with. 1235 * 1236 * Zstd has a simple internal heuristic that selects which strategy to use 1237 * at the beginning of a compression. However, if experimentation shows that 1238 * Zstd is making poor choices, it is possible to override that choice with 1239 * this enum. 1240 */ 1241 ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */ 1242 ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */ 1243 ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */ 1244 ZSTD_dictForceLoad = 3 /* Always reload the dictionary */ 1245 } ZSTD_dictAttachPref_e; 1246 1247 typedef enum { 1248 ZSTD_lcm_auto = 0, /**< Automatically determine the compression mode based on the compression level. 1249 * Negative compression levels will be uncompressed, and positive compression 1250 * levels will be compressed. */ 1251 ZSTD_lcm_huffman = 1, /**< Always attempt Huffman compression. Uncompressed literals will still be 1252 * emitted if Huffman compression is not profitable. */ 1253 ZSTD_lcm_uncompressed = 2 /**< Always emit uncompressed literals. */ 1254 } ZSTD_literalCompressionMode_e; 1255 1256 1257 /*************************************** 1258 * Frame size functions 1259 ***************************************/ 1260 1261 /*! ZSTD_findDecompressedSize() : 1262 * `src` should point to the start of a series of ZSTD encoded and/or skippable frames 1263 * `srcSize` must be the _exact_ size of this series 1264 * (i.e. there should be a frame boundary at `src + srcSize`) 1265 * @return : - decompressed size of all data in all successive frames 1266 * - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN 1267 * - if an error occurred: ZSTD_CONTENTSIZE_ERROR 1268 * 1269 * note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode. 1270 * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. 1271 * In which case, it's necessary to use streaming mode to decompress data. 1272 * note 2 : decompressed size is always present when compression is done with ZSTD_compress() 1273 * note 3 : decompressed size can be very large (64-bits value), 1274 * potentially larger than what local system can handle as a single memory segment. 1275 * In which case, it's necessary to use streaming mode to decompress data. 1276 * note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified. 1277 * Always ensure result fits within application's authorized limits. 1278 * Each application can set its own limits. 1279 * note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to 1280 * read each contained frame header. This is fast as most of the data is skipped, 1281 * however it does mean that all frame data must be present and valid. */ 1282 ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize); 1283 1284 /*! ZSTD_decompressBound() : 1285 * `src` should point to the start of a series of ZSTD encoded and/or skippable frames 1286 * `srcSize` must be the _exact_ size of this series 1287 * (i.e. there should be a frame boundary at `src + srcSize`) 1288 * @return : - upper-bound for the decompressed size of all data in all successive frames 1289 * - if an error occured: ZSTD_CONTENTSIZE_ERROR 1290 * 1291 * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame. 1292 * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`. 1293 * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value. 1294 * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by: 1295 * upper-bound = # blocks * min(128 KB, Window_Size) 1296 */ 1297 ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize); 1298 1299 /*! ZSTD_frameHeaderSize() : 1300 * srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX. 1301 * @return : size of the Frame Header, 1302 * or an error code (if srcSize is too small) */ 1303 ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); 1304 1305 typedef enum { 1306 ZSTD_sf_noBlockDelimiters = 0, /* Representation of ZSTD_Sequence has no block delimiters, sequences only */ 1307 ZSTD_sf_explicitBlockDelimiters = 1 /* Representation of ZSTD_Sequence contains explicit block delimiters */ 1308 } ZSTD_sequenceFormat_e; 1309 1310 /*! ZSTD_generateSequences() : 1311 * Generate sequences using ZSTD_compress2, given a source buffer. 1312 * 1313 * Each block will end with a dummy sequence 1314 * with offset == 0, matchLength == 0, and litLength == length of last literals. 1315 * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0) 1316 * simply acts as a block delimiter. 1317 * 1318 * zc can be used to insert custom compression params. 1319 * This function invokes ZSTD_compress2 1320 * 1321 * The output of this function can be fed into ZSTD_compressSequences() with CCtx 1322 * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters 1323 * @return : number of sequences generated 1324 */ 1325 1326 ZSTDLIB_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs, 1327 size_t outSeqsSize, const void* src, size_t srcSize); 1328 1329 /*! ZSTD_mergeBlockDelimiters() : 1330 * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals 1331 * by merging them into into the literals of the next sequence. 1332 * 1333 * As such, the final generated result has no explicit representation of block boundaries, 1334 * and the final last literals segment is not represented in the sequences. 1335 * 1336 * The output of this function can be fed into ZSTD_compressSequences() with CCtx 1337 * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters 1338 * @return : number of sequences left after merging 1339 */ 1340 ZSTDLIB_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize); 1341 1342 /*! ZSTD_compressSequences() : 1343 * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst. 1344 * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.) 1345 * The entire source is compressed into a single frame. 1346 * 1347 * The compression behavior changes based on cctx params. In particular: 1348 * If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain 1349 * no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on 1350 * the block size derived from the cctx, and sequences may be split. This is the default setting. 1351 * 1352 * If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain 1353 * block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided. 1354 * 1355 * If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined 1356 * behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for 1357 * specifics regarding offset/matchlength requirements) then the function will bail out and return an error. 1358 * 1359 * In addition to the two adjustable experimental params, there are other important cctx params. 1360 * - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN. 1361 * - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression. 1362 * - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset 1363 * is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md 1364 * 1365 * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused. 1366 * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly, 1367 * and cannot emit an RLE block that disagrees with the repcode history 1368 * @return : final compressed size or a ZSTD error. 1369 */ 1370 ZSTDLIB_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize, 1371 const ZSTD_Sequence* inSeqs, size_t inSeqsSize, 1372 const void* src, size_t srcSize); 1373 1374 1375 /*************************************** 1376 * Memory management 1377 ***************************************/ 1378 1379 /*! ZSTD_estimate*() : 1380 * These functions make it possible to estimate memory usage 1381 * of a future {D,C}Ctx, before its creation. 1382 * 1383 * ZSTD_estimateCCtxSize() will provide a memory budget large enough 1384 * for any compression level up to selected one. 1385 * Note : Unlike ZSTD_estimateCStreamSize*(), this estimate 1386 * does not include space for a window buffer. 1387 * Therefore, the estimation is only guaranteed for single-shot compressions, not streaming. 1388 * The estimate will assume the input may be arbitrarily large, 1389 * which is the worst case. 1390 * 1391 * When srcSize can be bound by a known and rather "small" value, 1392 * this fact can be used to provide a tighter estimation 1393 * because the CCtx compression context will need less memory. 1394 * This tighter estimation can be provided by more advanced functions 1395 * ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(), 1396 * and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter(). 1397 * Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits. 1398 * 1399 * Note 2 : only single-threaded compression is supported. 1400 * ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. 1401 */ 1402 ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel); 1403 ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); 1404 ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); 1405 ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void); 1406 1407 /*! ZSTD_estimateCStreamSize() : 1408 * ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one. 1409 * It will also consider src size to be arbitrarily "large", which is worst case. 1410 * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. 1411 * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. 1412 * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. 1413 * Note : CStream size estimation is only correct for single-threaded compression. 1414 * ZSTD_DStream memory budget depends on window Size. 1415 * This information can be passed manually, using ZSTD_estimateDStreamSize, 1416 * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); 1417 * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), 1418 * an internal ?Dict will be created, which additional size is not estimated here. 1419 * In this case, get total size by adding ZSTD_estimate?DictSize */ 1420 ZSTDLIB_API size_t ZSTD_estimateCStreamSize(int compressionLevel); 1421 ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); 1422 ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); 1423 ZSTDLIB_API size_t ZSTD_estimateDStreamSize(size_t windowSize); 1424 ZSTDLIB_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); 1425 1426 /*! ZSTD_estimate?DictSize() : 1427 * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). 1428 * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). 1429 * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. 1430 */ 1431 ZSTDLIB_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); 1432 ZSTDLIB_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); 1433 ZSTDLIB_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); 1434 1435 /*! ZSTD_initStatic*() : 1436 * Initialize an object using a pre-allocated fixed-size buffer. 1437 * workspace: The memory area to emplace the object into. 1438 * Provided pointer *must be 8-bytes aligned*. 1439 * Buffer must outlive object. 1440 * workspaceSize: Use ZSTD_estimate*Size() to determine 1441 * how large workspace must be to support target scenario. 1442 * @return : pointer to object (same address as workspace, just different type), 1443 * or NULL if error (size too small, incorrect alignment, etc.) 1444 * Note : zstd will never resize nor malloc() when using a static buffer. 1445 * If the object requires more memory than available, 1446 * zstd will just error out (typically ZSTD_error_memory_allocation). 1447 * Note 2 : there is no corresponding "free" function. 1448 * Since workspace is allocated externally, it must be freed externally too. 1449 * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level 1450 * into its associated cParams. 1451 * Limitation 1 : currently not compatible with internal dictionary creation, triggered by 1452 * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). 1453 * Limitation 2 : static cctx currently not compatible with multi-threading. 1454 * Limitation 3 : static dctx is incompatible with legacy support. 1455 */ 1456 ZSTDLIB_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); 1457 ZSTDLIB_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticCCtx() */ 1458 1459 ZSTDLIB_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); 1460 ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticDCtx() */ 1461 1462 ZSTDLIB_API const ZSTD_CDict* ZSTD_initStaticCDict( 1463 void* workspace, size_t workspaceSize, 1464 const void* dict, size_t dictSize, 1465 ZSTD_dictLoadMethod_e dictLoadMethod, 1466 ZSTD_dictContentType_e dictContentType, 1467 ZSTD_compressionParameters cParams); 1468 1469 ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict( 1470 void* workspace, size_t workspaceSize, 1471 const void* dict, size_t dictSize, 1472 ZSTD_dictLoadMethod_e dictLoadMethod, 1473 ZSTD_dictContentType_e dictContentType); 1474 1475 1476 /*! Custom memory allocation : 1477 * These prototypes make it possible to pass your own allocation/free functions. 1478 * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. 1479 * All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones. 1480 */ 1481 typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); 1482 typedef void (*ZSTD_freeFunction) (void* opaque, void* address); 1483 typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; 1484 static 1485 #ifdef __GNUC__ 1486 __attribute__((__unused__)) 1487 #endif 1488 ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /**< this constant defers to stdlib's functions */ 1489 1490 ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); 1491 ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); 1492 ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); 1493 ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); 1494 1495 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, 1496 ZSTD_dictLoadMethod_e dictLoadMethod, 1497 ZSTD_dictContentType_e dictContentType, 1498 ZSTD_compressionParameters cParams, 1499 ZSTD_customMem customMem); 1500 1501 /* ! Thread pool : 1502 * These prototypes make it possible to share a thread pool among multiple compression contexts. 1503 * This can limit resources for applications with multiple threads where each one uses 1504 * a threaded compression mode (via ZSTD_c_nbWorkers parameter). 1505 * ZSTD_createThreadPool creates a new thread pool with a given number of threads. 1506 * Note that the lifetime of such pool must exist while being used. 1507 * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value 1508 * to use an internal thread pool). 1509 * ZSTD_freeThreadPool frees a thread pool. 1510 */ 1511 typedef struct POOL_ctx_s ZSTD_threadPool; 1512 ZSTDLIB_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads); 1513 ZSTDLIB_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool); 1514 ZSTDLIB_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool); 1515 1516 /* 1517 * This API is temporary and is expected to change or disappear in the future! 1518 */ 1519 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced2( 1520 const void* dict, size_t dictSize, 1521 ZSTD_dictLoadMethod_e dictLoadMethod, 1522 ZSTD_dictContentType_e dictContentType, 1523 const ZSTD_CCtx_params* cctxParams, 1524 ZSTD_customMem customMem); 1525 1526 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(const void* dict, size_t dictSize, 1527 ZSTD_dictLoadMethod_e dictLoadMethod, 1528 ZSTD_dictContentType_e dictContentType, 1529 ZSTD_customMem customMem); 1530 1531 /*************************************** 1532 * Advanced compression functions 1533 ***************************************/ 1534 1535 /*! ZSTD_createCDict_byReference() : 1536 * Create a digested dictionary for compression 1537 * Dictionary content is just referenced, not duplicated. 1538 * As a consequence, `dictBuffer` **must** outlive CDict, 1539 * and its content must remain unmodified throughout the lifetime of CDict. 1540 * note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */ 1541 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); 1542 1543 /*! ZSTD_getDictID_fromCDict() : 1544 * Provides the dictID of the dictionary loaded into `cdict`. 1545 * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. 1546 * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ 1547 ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict); 1548 1549 /*! ZSTD_getCParams() : 1550 * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. 1551 * `estimatedSrcSize` value is optional, select 0 if not known */ 1552 ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); 1553 1554 /*! ZSTD_getParams() : 1555 * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. 1556 * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ 1557 ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); 1558 1559 /*! ZSTD_checkCParams() : 1560 * Ensure param values remain within authorized range. 1561 * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ 1562 ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); 1563 1564 /*! ZSTD_adjustCParams() : 1565 * optimize params for a given `srcSize` and `dictSize`. 1566 * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. 1567 * `dictSize` must be `0` when there is no dictionary. 1568 * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. 1569 * This function never fails (wide contract) */ 1570 ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); 1571 1572 /*! ZSTD_compress_advanced() : 1573 * Note : this function is now DEPRECATED. 1574 * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. 1575 * This prototype will be marked as deprecated and generate compilation warning on reaching v1.5.x */ 1576 ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, 1577 void* dst, size_t dstCapacity, 1578 const void* src, size_t srcSize, 1579 const void* dict,size_t dictSize, 1580 ZSTD_parameters params); 1581 1582 /*! ZSTD_compress_usingCDict_advanced() : 1583 * Note : this function is now REDUNDANT. 1584 * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters. 1585 * This prototype will be marked as deprecated and generate compilation warning in some future version */ 1586 ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, 1587 void* dst, size_t dstCapacity, 1588 const void* src, size_t srcSize, 1589 const ZSTD_CDict* cdict, 1590 ZSTD_frameParameters fParams); 1591 1592 1593 /*! ZSTD_CCtx_loadDictionary_byReference() : 1594 * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. 1595 * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ 1596 ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); 1597 1598 /*! ZSTD_CCtx_loadDictionary_advanced() : 1599 * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over 1600 * how to load the dictionary (by copy ? by reference ?) 1601 * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ 1602 ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); 1603 1604 /*! ZSTD_CCtx_refPrefix_advanced() : 1605 * Same as ZSTD_CCtx_refPrefix(), but gives finer control over 1606 * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ 1607 ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); 1608 1609 /* === experimental parameters === */ 1610 /* these parameters can be used with ZSTD_setParameter() 1611 * they are not guaranteed to remain supported in the future */ 1612 1613 /* Enables rsyncable mode, 1614 * which makes compressed files more rsync friendly 1615 * by adding periodic synchronization points to the compressed data. 1616 * The target average block size is ZSTD_c_jobSize / 2. 1617 * It's possible to modify the job size to increase or decrease 1618 * the granularity of the synchronization point. 1619 * Once the jobSize is smaller than the window size, 1620 * it will result in compression ratio degradation. 1621 * NOTE 1: rsyncable mode only works when multithreading is enabled. 1622 * NOTE 2: rsyncable performs poorly in combination with long range mode, 1623 * since it will decrease the effectiveness of synchronization points, 1624 * though mileage may vary. 1625 * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. 1626 * If the selected compression level is already running significantly slower, 1627 * the overall speed won't be significantly impacted. 1628 */ 1629 #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 1630 1631 /* Select a compression format. 1632 * The value must be of type ZSTD_format_e. 1633 * See ZSTD_format_e enum definition for details */ 1634 #define ZSTD_c_format ZSTD_c_experimentalParam2 1635 1636 /* Force back-reference distances to remain < windowSize, 1637 * even when referencing into Dictionary content (default:0) */ 1638 #define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 1639 1640 /* Controls whether the contents of a CDict 1641 * are used in place, or copied into the working context. 1642 * Accepts values from the ZSTD_dictAttachPref_e enum. 1643 * See the comments on that enum for an explanation of the feature. */ 1644 #define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 1645 1646 /* Controls how the literals are compressed (default is auto). 1647 * The value must be of type ZSTD_literalCompressionMode_e. 1648 * See ZSTD_literalCompressionMode_t enum definition for details. 1649 */ 1650 #define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 1651 1652 /* Tries to fit compressed block size to be around targetCBlockSize. 1653 * No target when targetCBlockSize == 0. 1654 * There is no guarantee on compressed block size (default:0) */ 1655 #define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6 1656 1657 /* User's best guess of source size. 1658 * Hint is not valid when srcSizeHint == 0. 1659 * There is no guarantee that hint is close to actual source size, 1660 * but compression ratio may regress significantly if guess considerably underestimates */ 1661 #define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7 1662 1663 /* Controls whether the new and experimental "dedicated dictionary search 1664 * structure" can be used. This feature is still rough around the edges, be 1665 * prepared for surprising behavior! 1666 * 1667 * How to use it: 1668 * 1669 * When using a CDict, whether to use this feature or not is controlled at 1670 * CDict creation, and it must be set in a CCtxParams set passed into that 1671 * construction (via ZSTD_createCDict_advanced2()). A compression will then 1672 * use the feature or not based on how the CDict was constructed; the value of 1673 * this param, set in the CCtx, will have no effect. 1674 * 1675 * However, when a dictionary buffer is passed into a CCtx, such as via 1676 * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control 1677 * whether the CDict that is created internally can use the feature or not. 1678 * 1679 * What it does: 1680 * 1681 * Normally, the internal data structures of the CDict are analogous to what 1682 * would be stored in a CCtx after compressing the contents of a dictionary. 1683 * To an approximation, a compression using a dictionary can then use those 1684 * data structures to simply continue what is effectively a streaming 1685 * compression where the simulated compression of the dictionary left off. 1686 * Which is to say, the search structures in the CDict are normally the same 1687 * format as in the CCtx. 1688 * 1689 * It is possible to do better, since the CDict is not like a CCtx: the search 1690 * structures are written once during CDict creation, and then are only read 1691 * after that, while the search structures in the CCtx are both read and 1692 * written as the compression goes along. This means we can choose a search 1693 * structure for the dictionary that is read-optimized. 1694 * 1695 * This feature enables the use of that different structure. 1696 * 1697 * Note that some of the members of the ZSTD_compressionParameters struct have 1698 * different semantics and constraints in the dedicated search structure. It is 1699 * highly recommended that you simply set a compression level in the CCtxParams 1700 * you pass into the CDict creation call, and avoid messing with the cParams 1701 * directly. 1702 * 1703 * Effects: 1704 * 1705 * This will only have any effect when the selected ZSTD_strategy 1706 * implementation supports this feature. Currently, that's limited to 1707 * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2. 1708 * 1709 * Note that this means that the CDict tables can no longer be copied into the 1710 * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be 1711 * useable. The dictionary can only be attached or reloaded. 1712 * 1713 * In general, you should expect compression to be faster--sometimes very much 1714 * so--and CDict creation to be slightly slower. Eventually, we will probably 1715 * make this mode the default. 1716 */ 1717 #define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8 1718 1719 /* ZSTD_c_stableInBuffer 1720 * Experimental parameter. 1721 * Default is 0 == disabled. Set to 1 to enable. 1722 * 1723 * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same 1724 * between calls, except for the modifications that zstd makes to pos (the 1725 * caller must not modify pos). This is checked by the compressor, and 1726 * compression will fail if it ever changes. This means the only flush 1727 * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end 1728 * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos) 1729 * MUST not be modified during compression or you will get data corruption. 1730 * 1731 * When this flag is enabled zstd won't allocate an input window buffer, 1732 * because the user guarantees it can reference the ZSTD_inBuffer until 1733 * the frame is complete. But, it will still allocate an output buffer 1734 * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also 1735 * avoid the memcpy() from the input buffer to the input window buffer. 1736 * 1737 * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used. 1738 * That means this flag cannot be used with ZSTD_compressStream(). 1739 * 1740 * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using 1741 * this flag is ALWAYS memory safe, and will never access out-of-bounds 1742 * memory. However, compression WILL fail if you violate the preconditions. 1743 * 1744 * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST 1745 * not be modified during compression or you will get data corruption. This 1746 * is because zstd needs to reference data in the ZSTD_inBuffer to find 1747 * matches. Normally zstd maintains its own window buffer for this purpose, 1748 * but passing this flag tells zstd to use the user provided buffer. 1749 */ 1750 #define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9 1751 1752 /* ZSTD_c_stableOutBuffer 1753 * Experimental parameter. 1754 * Default is 0 == disabled. Set to 1 to enable. 1755 * 1756 * Tells he compressor that the ZSTD_outBuffer will not be resized between 1757 * calls. Specifically: (out.size - out.pos) will never grow. This gives the 1758 * compressor the freedom to say: If the compressed data doesn't fit in the 1759 * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to 1760 * always decompress directly into the output buffer, instead of decompressing 1761 * into an internal buffer and copying to the output buffer. 1762 * 1763 * When this flag is enabled zstd won't allocate an output buffer, because 1764 * it can write directly to the ZSTD_outBuffer. It will still allocate the 1765 * input window buffer (see ZSTD_c_stableInBuffer). 1766 * 1767 * Zstd will check that (out.size - out.pos) never grows and return an error 1768 * if it does. While not strictly necessary, this should prevent surprises. 1769 */ 1770 #define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10 1771 1772 /* ZSTD_c_blockDelimiters 1773 * Default is 0 == ZSTD_sf_noBlockDelimiters. 1774 * 1775 * For use with sequence compression API: ZSTD_compressSequences(). 1776 * 1777 * Designates whether or not the given array of ZSTD_Sequence contains block delimiters 1778 * and last literals, which are defined as sequences with offset == 0 and matchLength == 0. 1779 * See the definition of ZSTD_Sequence for more specifics. 1780 */ 1781 #define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11 1782 1783 /* ZSTD_c_validateSequences 1784 * Default is 0 == disabled. Set to 1 to enable sequence validation. 1785 * 1786 * For use with sequence compression API: ZSTD_compressSequences(). 1787 * Designates whether or not we validate sequences provided to ZSTD_compressSequences() 1788 * during function execution. 1789 * 1790 * Without validation, providing a sequence that does not conform to the zstd spec will cause 1791 * undefined behavior, and may produce a corrupted block. 1792 * 1793 * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for 1794 * specifics regarding offset/matchlength requirements) then the function will bail out and 1795 * return an error. 1796 * 1797 */ 1798 #define ZSTD_c_validateSequences ZSTD_c_experimentalParam12 1799 1800 /*! ZSTD_CCtx_getParameter() : 1801 * Get the requested compression parameter value, selected by enum ZSTD_cParameter, 1802 * and store it into int* value. 1803 * @return : 0, or an error code (which can be tested with ZSTD_isError()). 1804 */ 1805 ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); 1806 1807 1808 /*! ZSTD_CCtx_params : 1809 * Quick howto : 1810 * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure 1811 * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into 1812 * an existing ZSTD_CCtx_params structure. 1813 * This is similar to 1814 * ZSTD_CCtx_setParameter(). 1815 * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to 1816 * an existing CCtx. 1817 * These parameters will be applied to 1818 * all subsequent frames. 1819 * - ZSTD_compressStream2() : Do compression using the CCtx. 1820 * - ZSTD_freeCCtxParams() : Free the memory. 1821 * 1822 * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() 1823 * for static allocation of CCtx for single-threaded compression. 1824 */ 1825 ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); 1826 ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); 1827 1828 /*! ZSTD_CCtxParams_reset() : 1829 * Reset params to default values. 1830 */ 1831 ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); 1832 1833 /*! ZSTD_CCtxParams_init() : 1834 * Initializes the compression parameters of cctxParams according to 1835 * compression level. All other parameters are reset to their default values. 1836 */ 1837 ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); 1838 1839 /*! ZSTD_CCtxParams_init_advanced() : 1840 * Initializes the compression and frame parameters of cctxParams according to 1841 * params. All other parameters are reset to their default values. 1842 */ 1843 ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); 1844 1845 /*! ZSTD_CCtxParams_setParameter() : 1846 * Similar to ZSTD_CCtx_setParameter. 1847 * Set one compression parameter, selected by enum ZSTD_cParameter. 1848 * Parameters must be applied to a ZSTD_CCtx using 1849 * ZSTD_CCtx_setParametersUsingCCtxParams(). 1850 * @result : a code representing success or failure (which can be tested with 1851 * ZSTD_isError()). 1852 */ 1853 ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); 1854 1855 /*! ZSTD_CCtxParams_getParameter() : 1856 * Similar to ZSTD_CCtx_getParameter. 1857 * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. 1858 * @result : 0, or an error code (which can be tested with ZSTD_isError()). 1859 */ 1860 ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); 1861 1862 /*! ZSTD_CCtx_setParametersUsingCCtxParams() : 1863 * Apply a set of ZSTD_CCtx_params to the compression context. 1864 * This can be done even after compression is started, 1865 * if nbWorkers==0, this will have no impact until a new compression is started. 1866 * if nbWorkers>=1, new parameters will be picked up at next job, 1867 * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). 1868 */ 1869 ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( 1870 ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); 1871 1872 /*! ZSTD_compressStream2_simpleArgs() : 1873 * Same as ZSTD_compressStream2(), 1874 * but using only integral types as arguments. 1875 * This variant might be helpful for binders from dynamic languages 1876 * which have troubles handling structures containing memory pointers. 1877 */ 1878 ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs ( 1879 ZSTD_CCtx* cctx, 1880 void* dst, size_t dstCapacity, size_t* dstPos, 1881 const void* src, size_t srcSize, size_t* srcPos, 1882 ZSTD_EndDirective endOp); 1883 1884 1885 /*************************************** 1886 * Advanced decompression functions 1887 ***************************************/ 1888 1889 /*! ZSTD_isFrame() : 1890 * Tells if the content of `buffer` starts with a valid Frame Identifier. 1891 * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. 1892 * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. 1893 * Note 3 : Skippable Frame Identifiers are considered valid. */ 1894 ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size); 1895 1896 /*! ZSTD_createDDict_byReference() : 1897 * Create a digested dictionary, ready to start decompression operation without startup delay. 1898 * Dictionary content is referenced, and therefore stays in dictBuffer. 1899 * It is important that dictBuffer outlives DDict, 1900 * it must remain read accessible throughout the lifetime of DDict */ 1901 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); 1902 1903 /*! ZSTD_DCtx_loadDictionary_byReference() : 1904 * Same as ZSTD_DCtx_loadDictionary(), 1905 * but references `dict` content instead of copying it into `dctx`. 1906 * This saves memory if `dict` remains around., 1907 * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ 1908 ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 1909 1910 /*! ZSTD_DCtx_loadDictionary_advanced() : 1911 * Same as ZSTD_DCtx_loadDictionary(), 1912 * but gives direct control over 1913 * how to load the dictionary (by copy ? by reference ?) 1914 * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ 1915 ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); 1916 1917 /*! ZSTD_DCtx_refPrefix_advanced() : 1918 * Same as ZSTD_DCtx_refPrefix(), but gives finer control over 1919 * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ 1920 ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); 1921 1922 /*! ZSTD_DCtx_setMaxWindowSize() : 1923 * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. 1924 * This protects a decoder context from reserving too much memory for itself (potential attack scenario). 1925 * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. 1926 * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) 1927 * @return : 0, or an error code (which can be tested using ZSTD_isError()). 1928 */ 1929 ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); 1930 1931 /*! ZSTD_DCtx_getParameter() : 1932 * Get the requested decompression parameter value, selected by enum ZSTD_dParameter, 1933 * and store it into int* value. 1934 * @return : 0, or an error code (which can be tested with ZSTD_isError()). 1935 */ 1936 ZSTDLIB_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value); 1937 1938 /* ZSTD_d_format 1939 * experimental parameter, 1940 * allowing selection between ZSTD_format_e input compression formats 1941 */ 1942 #define ZSTD_d_format ZSTD_d_experimentalParam1 1943 /* ZSTD_d_stableOutBuffer 1944 * Experimental parameter. 1945 * Default is 0 == disabled. Set to 1 to enable. 1946 * 1947 * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same 1948 * between calls, except for the modifications that zstd makes to pos (the 1949 * caller must not modify pos). This is checked by the decompressor, and 1950 * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer 1951 * MUST be large enough to fit the entire decompressed frame. This will be 1952 * checked when the frame content size is known. The data in the ZSTD_outBuffer 1953 * in the range [dst, dst + pos) MUST not be modified during decompression 1954 * or you will get data corruption. 1955 * 1956 * When this flags is enabled zstd won't allocate an output buffer, because 1957 * it can write directly to the ZSTD_outBuffer, but it will still allocate 1958 * an input buffer large enough to fit any compressed block. This will also 1959 * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer. 1960 * If you need to avoid the input buffer allocation use the buffer-less 1961 * streaming API. 1962 * 1963 * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using 1964 * this flag is ALWAYS memory safe, and will never access out-of-bounds 1965 * memory. However, decompression WILL fail if you violate the preconditions. 1966 * 1967 * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST 1968 * not be modified during decompression or you will get data corruption. This 1969 * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate 1970 * matches. Normally zstd maintains its own buffer for this purpose, but passing 1971 * this flag tells zstd to use the user provided buffer. 1972 */ 1973 #define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2 1974 1975 /* ZSTD_d_forceIgnoreChecksum 1976 * Experimental parameter. 1977 * Default is 0 == disabled. Set to 1 to enable 1978 * 1979 * Tells the decompressor to skip checksum validation during decompression, regardless 1980 * of whether checksumming was specified during compression. This offers some 1981 * slight performance benefits, and may be useful for debugging. 1982 * Param has values of type ZSTD_forceIgnoreChecksum_e 1983 */ 1984 #define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3 1985 1986 /*! ZSTD_DCtx_setFormat() : 1987 * Instruct the decoder context about what kind of data to decode next. 1988 * This instruction is mandatory to decode data without a fully-formed header, 1989 * such ZSTD_f_zstd1_magicless for example. 1990 * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ 1991 ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); 1992 1993 /*! ZSTD_decompressStream_simpleArgs() : 1994 * Same as ZSTD_decompressStream(), 1995 * but using only integral types as arguments. 1996 * This can be helpful for binders from dynamic languages 1997 * which have troubles handling structures containing memory pointers. 1998 */ 1999 ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs ( 2000 ZSTD_DCtx* dctx, 2001 void* dst, size_t dstCapacity, size_t* dstPos, 2002 const void* src, size_t srcSize, size_t* srcPos); 2003 2004 2005 /******************************************************************** 2006 * Advanced streaming functions 2007 * Warning : most of these functions are now redundant with the Advanced API. 2008 * Once Advanced API reaches "stable" status, 2009 * redundant functions will be deprecated, and then at some point removed. 2010 ********************************************************************/ 2011 2012 /*===== Advanced Streaming compression functions =====*/ 2013 2014 /*! ZSTD_initCStream_srcSize() : 2015 * This function is deprecated, and equivalent to: 2016 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2017 * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) 2018 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 2019 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2020 * 2021 * pledgedSrcSize must be correct. If it is not known at init time, use 2022 * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, 2023 * "0" also disables frame content size field. It may be enabled in the future. 2024 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2025 */ 2026 ZSTDLIB_API size_t 2027 ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, 2028 int compressionLevel, 2029 unsigned long long pledgedSrcSize); 2030 2031 /*! ZSTD_initCStream_usingDict() : 2032 * This function is deprecated, and is equivalent to: 2033 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2034 * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); 2035 * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); 2036 * 2037 * Creates of an internal CDict (incompatible with static CCtx), except if 2038 * dict == NULL or dictSize < 8, in which case no dict is used. 2039 * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if 2040 * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. 2041 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2042 */ 2043 ZSTDLIB_API size_t 2044 ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, 2045 const void* dict, size_t dictSize, 2046 int compressionLevel); 2047 2048 /*! ZSTD_initCStream_advanced() : 2049 * This function is deprecated, and is approximately equivalent to: 2050 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2051 * // Pseudocode: Set each zstd parameter and leave the rest as-is. 2052 * for ((param, value) : params) { 2053 * ZSTD_CCtx_setParameter(zcs, param, value); 2054 * } 2055 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2056 * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); 2057 * 2058 * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy. 2059 * pledgedSrcSize must be correct. 2060 * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. 2061 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2062 */ 2063 ZSTDLIB_API size_t 2064 ZSTD_initCStream_advanced(ZSTD_CStream* zcs, 2065 const void* dict, size_t dictSize, 2066 ZSTD_parameters params, 2067 unsigned long long pledgedSrcSize); 2068 2069 /*! ZSTD_initCStream_usingCDict() : 2070 * This function is deprecated, and equivalent to: 2071 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2072 * ZSTD_CCtx_refCDict(zcs, cdict); 2073 * 2074 * note : cdict will just be referenced, and must outlive compression session 2075 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2076 */ 2077 ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); 2078 2079 /*! ZSTD_initCStream_usingCDict_advanced() : 2080 * This function is DEPRECATED, and is approximately equivalent to: 2081 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2082 * // Pseudocode: Set each zstd frame parameter and leave the rest as-is. 2083 * for ((fParam, value) : fParams) { 2084 * ZSTD_CCtx_setParameter(zcs, fParam, value); 2085 * } 2086 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2087 * ZSTD_CCtx_refCDict(zcs, cdict); 2088 * 2089 * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. 2090 * pledgedSrcSize must be correct. If srcSize is not known at init time, use 2091 * value ZSTD_CONTENTSIZE_UNKNOWN. 2092 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2093 */ 2094 ZSTDLIB_API size_t 2095 ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, 2096 const ZSTD_CDict* cdict, 2097 ZSTD_frameParameters fParams, 2098 unsigned long long pledgedSrcSize); 2099 2100 /*! ZSTD_resetCStream() : 2101 * This function is deprecated, and is equivalent to: 2102 * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); 2103 * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); 2104 * 2105 * start a new frame, using same parameters from previous frame. 2106 * This is typically useful to skip dictionary loading stage, since it will re-use it in-place. 2107 * Note that zcs must be init at least once before using ZSTD_resetCStream(). 2108 * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. 2109 * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. 2110 * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, 2111 * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. 2112 * @return : 0, or an error code (which can be tested using ZSTD_isError()) 2113 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2114 */ 2115 ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); 2116 2117 2118 typedef struct { 2119 unsigned long long ingested; /* nb input bytes read and buffered */ 2120 unsigned long long consumed; /* nb input bytes actually compressed */ 2121 unsigned long long produced; /* nb of compressed bytes generated and buffered */ 2122 unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ 2123 unsigned currentJobID; /* MT only : latest started job nb */ 2124 unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ 2125 } ZSTD_frameProgression; 2126 2127 /* ZSTD_getFrameProgression() : 2128 * tells how much data has been ingested (read from input) 2129 * consumed (input actually compressed) and produced (output) for current frame. 2130 * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. 2131 * Aggregates progression inside active worker threads. 2132 */ 2133 ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); 2134 2135 /*! ZSTD_toFlushNow() : 2136 * Tell how many bytes are ready to be flushed immediately. 2137 * Useful for multithreading scenarios (nbWorkers >= 1). 2138 * Probe the oldest active job, defined as oldest job not yet entirely flushed, 2139 * and check its output buffer. 2140 * @return : amount of data stored in oldest job and ready to be flushed immediately. 2141 * if @return == 0, it means either : 2142 * + there is no active job (could be checked with ZSTD_frameProgression()), or 2143 * + oldest job is still actively compressing data, 2144 * but everything it has produced has also been flushed so far, 2145 * therefore flush speed is limited by production speed of oldest job 2146 * irrespective of the speed of concurrent (and newer) jobs. 2147 */ 2148 ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); 2149 2150 2151 /*===== Advanced Streaming decompression functions =====*/ 2152 2153 /*! 2154 * This function is deprecated, and is equivalent to: 2155 * 2156 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2157 * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); 2158 * 2159 * note: no dictionary will be used if dict == NULL or dictSize < 8 2160 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2161 */ 2162 ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); 2163 2164 /*! 2165 * This function is deprecated, and is equivalent to: 2166 * 2167 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2168 * ZSTD_DCtx_refDDict(zds, ddict); 2169 * 2170 * note : ddict is referenced, it must outlive decompression session 2171 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2172 */ 2173 ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); 2174 2175 /*! 2176 * This function is deprecated, and is equivalent to: 2177 * 2178 * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); 2179 * 2180 * re-use decompression parameters from previous init; saves dictionary loading 2181 * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x 2182 */ 2183 ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); 2184 2185 2186 /********************************************************************* 2187 * Buffer-less and synchronous inner streaming functions 2188 * 2189 * This is an advanced API, giving full control over buffer management, for users which need direct control over memory. 2190 * But it's also a complex one, with several restrictions, documented below. 2191 * Prefer normal streaming API for an easier experience. 2192 ********************************************************************* */ 2193 2194 /** 2195 Buffer-less streaming compression (synchronous mode) 2196 2197 A ZSTD_CCtx object is required to track streaming operations. 2198 Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. 2199 ZSTD_CCtx object can be re-used multiple times within successive compression operations. 2200 2201 Start by initializing a context. 2202 Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression, 2203 or ZSTD_compressBegin_advanced(), for finer parameter control. 2204 It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx() 2205 2206 Then, consume your input using ZSTD_compressContinue(). 2207 There are some important considerations to keep in mind when using this advanced function : 2208 - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. 2209 - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. 2210 - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. 2211 Worst case evaluation is provided by ZSTD_compressBound(). 2212 ZSTD_compressContinue() doesn't guarantee recover after a failed compression. 2213 - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). 2214 It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) 2215 - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. 2216 In which case, it will "discard" the relevant memory section from its history. 2217 2218 Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. 2219 It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. 2220 Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. 2221 2222 `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. 2223 */ 2224 2225 /*===== Buffer-less streaming compression functions =====*/ 2226 ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); 2227 ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); 2228 ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ 2229 ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ 2230 ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ 2231 ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ 2232 2233 ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2234 ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2235 2236 2237 /** 2238 Buffer-less streaming decompression (synchronous mode) 2239 2240 A ZSTD_DCtx object is required to track streaming operations. 2241 Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. 2242 A ZSTD_DCtx object can be re-used multiple times. 2243 2244 First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). 2245 Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. 2246 Data fragment must be large enough to ensure successful decoding. 2247 `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. 2248 @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. 2249 >0 : `srcSize` is too small, please provide at least @result bytes on next attempt. 2250 errorCode, which can be tested using ZSTD_isError(). 2251 2252 It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, 2253 such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). 2254 Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. 2255 As a consequence, check that values remain within valid application range. 2256 For example, do not allocate memory blindly, check that `windowSize` is within expectation. 2257 Each application can set its own limits, depending on local restrictions. 2258 For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. 2259 2260 ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. 2261 ZSTD_decompressContinue() is very sensitive to contiguity, 2262 if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, 2263 or that previous contiguous segment is large enough to properly handle maximum back-reference distance. 2264 There are multiple ways to guarantee this condition. 2265 2266 The most memory efficient way is to use a round buffer of sufficient size. 2267 Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), 2268 which can @return an error code if required value is too large for current system (in 32-bits mode). 2269 In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, 2270 up to the moment there is not enough room left in the buffer to guarantee decoding another full block, 2271 which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. 2272 At which point, decoding can resume from the beginning of the buffer. 2273 Note that already decoded data stored in the buffer should be flushed before being overwritten. 2274 2275 There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. 2276 2277 Finally, if you control the compression process, you can also ignore all buffer size rules, 2278 as long as the encoder and decoder progress in "lock-step", 2279 aka use exactly the same buffer sizes, break contiguity at the same place, etc. 2280 2281 Once buffers are setup, start decompression, with ZSTD_decompressBegin(). 2282 If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). 2283 2284 Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. 2285 ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). 2286 ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. 2287 2288 @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). 2289 It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. 2290 It can also be an error code, which can be tested with ZSTD_isError(). 2291 2292 A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. 2293 Context can then be reset to start a new decompression. 2294 2295 Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). 2296 This information is not required to properly decode a frame. 2297 2298 == Special case : skippable frames == 2299 2300 Skippable frames allow integration of user-defined data into a flow of concatenated frames. 2301 Skippable frames will be ignored (skipped) by decompressor. 2302 The format of skippable frames is as follows : 2303 a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F 2304 b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits 2305 c) Frame Content - any content (User Data) of length equal to Frame Size 2306 For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. 2307 For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. 2308 */ 2309 2310 /*===== Buffer-less streaming decompression functions =====*/ 2311 typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; 2312 typedef struct { 2313 unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ 2314 unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ 2315 unsigned blockSizeMax; 2316 ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ 2317 unsigned headerSize; 2318 unsigned dictID; 2319 unsigned checksumFlag; 2320 } ZSTD_frameHeader; 2321 2322 /*! ZSTD_getFrameHeader() : 2323 * decode Frame Header, or requires larger `srcSize`. 2324 * @return : 0, `zfhPtr` is correctly filled, 2325 * >0, `srcSize` is too small, value is wanted `srcSize` amount, 2326 * or an error code, which can be tested using ZSTD_isError() */ 2327 ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /**< doesn't consume input */ 2328 /*! ZSTD_getFrameHeader_advanced() : 2329 * same as ZSTD_getFrameHeader(), 2330 * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ 2331 ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); 2332 ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ 2333 2334 ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); 2335 ZSTDLIB_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); 2336 ZSTDLIB_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); 2337 2338 ZSTDLIB_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); 2339 ZSTDLIB_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2340 2341 /* misc */ 2342 ZSTDLIB_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); 2343 typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; 2344 ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); 2345 2346 2347 2348 2349 /* ============================ */ 2350 /** Block level API */ 2351 /* ============================ */ 2352 2353 /*! 2354 Block functions produce and decode raw zstd blocks, without frame metadata. 2355 Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). 2356 But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. 2357 2358 A few rules to respect : 2359 - Compressing and decompressing require a context structure 2360 + Use ZSTD_createCCtx() and ZSTD_createDCtx() 2361 - It is necessary to init context before starting 2362 + compression : any ZSTD_compressBegin*() variant, including with dictionary 2363 + decompression : any ZSTD_decompressBegin*() variant, including with dictionary 2364 + copyCCtx() and copyDCtx() can be used too 2365 - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB 2366 + If input is larger than a block size, it's necessary to split input data into multiple blocks 2367 + For inputs larger than a single block, consider using regular ZSTD_compress() instead. 2368 Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. 2369 - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! 2370 ===> In which case, nothing is produced into `dst` ! 2371 + User __must__ test for such outcome and deal directly with uncompressed data 2372 + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. 2373 Doing so would mess up with statistics history, leading to potential data corruption. 2374 + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! 2375 + In case of multiple successive blocks, should some of them be uncompressed, 2376 decoder must be informed of their existence in order to follow proper history. 2377 Use ZSTD_insertBlock() for such a case. 2378 */ 2379 2380 /*===== Raw zstd block functions =====*/ 2381 ZSTDLIB_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); 2382 ZSTDLIB_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2383 ZSTDLIB_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); 2384 ZSTDLIB_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ 2385 2386 2387 #endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ 2388 2389 #if defined (__cplusplus) 2390 } 2391 #endif 2392